xref: /openbmc/linux/drivers/ssb/sprom.c (revision b868a02e)
1 /*
2  * Sonics Silicon Backplane
3  * Common SPROM support routines
4  *
5  * Copyright (C) 2005-2008 Michael Buesch <m@bues.ch>
6  * Copyright (C) 2005 Martin Langer <martin-langer@gmx.de>
7  * Copyright (C) 2005 Stefano Brivio <st3@riseup.net>
8  * Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org>
9  * Copyright (C) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch>
10  *
11  * Licensed under the GNU/GPL. See COPYING for details.
12  */
13 
14 #include "ssb_private.h"
15 
16 #include <linux/ctype.h>
17 #include <linux/slab.h>
18 
19 
20 static int(*get_fallback_sprom)(struct ssb_bus *dev, struct ssb_sprom *out);
21 
22 
23 static int sprom2hex(const u16 *sprom, char *buf, size_t buf_len,
24 		     size_t sprom_size_words)
25 {
26 	int i, pos = 0;
27 
28 	for (i = 0; i < sprom_size_words; i++)
29 		pos += scnprintf(buf + pos, buf_len - pos - 1,
30 				"%04X", swab16(sprom[i]) & 0xFFFF);
31 	pos += scnprintf(buf + pos, buf_len - pos - 1, "\n");
32 
33 	return pos + 1;
34 }
35 
36 static int hex2sprom(u16 *sprom, const char *dump, size_t len,
37 		     size_t sprom_size_words)
38 {
39 	char c, tmp[5] = { 0 };
40 	int err, cnt = 0;
41 	unsigned long parsed;
42 
43 	/* Strip whitespace at the end. */
44 	while (len) {
45 		c = dump[len - 1];
46 		if (!isspace(c) && c != '\0')
47 			break;
48 		len--;
49 	}
50 	/* Length must match exactly. */
51 	if (len != sprom_size_words * 4)
52 		return -EINVAL;
53 
54 	while (cnt < sprom_size_words) {
55 		memcpy(tmp, dump, 4);
56 		dump += 4;
57 		err = kstrtoul(tmp, 16, &parsed);
58 		if (err)
59 			return err;
60 		sprom[cnt++] = swab16((u16)parsed);
61 	}
62 
63 	return 0;
64 }
65 
66 /* Common sprom device-attribute show-handler */
67 ssize_t ssb_attr_sprom_show(struct ssb_bus *bus, char *buf,
68 			    int (*sprom_read)(struct ssb_bus *bus, u16 *sprom))
69 {
70 	u16 *sprom;
71 	int err = -ENOMEM;
72 	ssize_t count = 0;
73 	size_t sprom_size_words = bus->sprom_size;
74 
75 	sprom = kcalloc(sprom_size_words, sizeof(u16), GFP_KERNEL);
76 	if (!sprom)
77 		goto out;
78 
79 	/* Use interruptible locking, as the SPROM write might
80 	 * be holding the lock for several seconds. So allow userspace
81 	 * to cancel operation.
82 	 */
83 	err = -ERESTARTSYS;
84 	if (mutex_lock_interruptible(&bus->sprom_mutex))
85 		goto out_kfree;
86 	err = sprom_read(bus, sprom);
87 	mutex_unlock(&bus->sprom_mutex);
88 
89 	if (!err)
90 		count = sprom2hex(sprom, buf, PAGE_SIZE, sprom_size_words);
91 
92 out_kfree:
93 	kfree(sprom);
94 out:
95 	return err ? err : count;
96 }
97 
98 /* Common sprom device-attribute store-handler */
99 ssize_t ssb_attr_sprom_store(struct ssb_bus *bus,
100 			     const char *buf, size_t count,
101 			     int (*sprom_check_crc)(const u16 *sprom, size_t size),
102 			     int (*sprom_write)(struct ssb_bus *bus, const u16 *sprom))
103 {
104 	u16 *sprom;
105 	int res = 0, err = -ENOMEM;
106 	size_t sprom_size_words = bus->sprom_size;
107 	struct ssb_freeze_context freeze;
108 
109 	sprom = kcalloc(bus->sprom_size, sizeof(u16), GFP_KERNEL);
110 	if (!sprom)
111 		goto out;
112 	err = hex2sprom(sprom, buf, count, sprom_size_words);
113 	if (err) {
114 		err = -EINVAL;
115 		goto out_kfree;
116 	}
117 	err = sprom_check_crc(sprom, sprom_size_words);
118 	if (err) {
119 		err = -EINVAL;
120 		goto out_kfree;
121 	}
122 
123 	/* Use interruptible locking, as the SPROM write might
124 	 * be holding the lock for several seconds. So allow userspace
125 	 * to cancel operation.
126 	 */
127 	err = -ERESTARTSYS;
128 	if (mutex_lock_interruptible(&bus->sprom_mutex))
129 		goto out_kfree;
130 	err = ssb_devices_freeze(bus, &freeze);
131 	if (err) {
132 		pr_err("SPROM write: Could not freeze all devices\n");
133 		goto out_unlock;
134 	}
135 	res = sprom_write(bus, sprom);
136 	err = ssb_devices_thaw(&freeze);
137 	if (err)
138 		pr_err("SPROM write: Could not thaw all devices\n");
139 out_unlock:
140 	mutex_unlock(&bus->sprom_mutex);
141 out_kfree:
142 	kfree(sprom);
143 out:
144 	if (res)
145 		return res;
146 	return err ? err : count;
147 }
148 
149 /**
150  * ssb_arch_register_fallback_sprom - Registers a method providing a
151  * fallback SPROM if no SPROM is found.
152  *
153  * @sprom_callback: The callback function.
154  *
155  * With this function the architecture implementation may register a
156  * callback handler which fills the SPROM data structure. The fallback is
157  * only used for PCI based SSB devices, where no valid SPROM can be found
158  * in the shadow registers.
159  *
160  * This function is useful for weird architectures that have a half-assed
161  * SSB device hardwired to their PCI bus.
162  *
163  * Note that it does only work with PCI attached SSB devices. PCMCIA
164  * devices currently don't use this fallback.
165  * Architectures must provide the SPROM for native SSB devices anyway, so
166  * the fallback also isn't used for native devices.
167  *
168  * This function is available for architecture code, only. So it is not
169  * exported.
170  */
171 int ssb_arch_register_fallback_sprom(int (*sprom_callback)(struct ssb_bus *bus,
172 				     struct ssb_sprom *out))
173 {
174 	if (get_fallback_sprom)
175 		return -EEXIST;
176 	get_fallback_sprom = sprom_callback;
177 
178 	return 0;
179 }
180 
181 int ssb_fill_sprom_with_fallback(struct ssb_bus *bus, struct ssb_sprom *out)
182 {
183 	if (!get_fallback_sprom)
184 		return -ENOENT;
185 
186 	return get_fallback_sprom(bus, out);
187 }
188 
189 /* https://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */
190 bool ssb_is_sprom_available(struct ssb_bus *bus)
191 {
192 	/* status register only exists on chipcomon rev >= 11 and we need check
193 	 * for >= 31 only
194 	 */
195 	/* this routine differs from specs as we do not access SPROM directly
196 	 * on PCMCIA
197 	 */
198 	if (bus->bustype == SSB_BUSTYPE_PCI &&
199 	    bus->chipco.dev &&	/* can be unavailable! */
200 	    bus->chipco.dev->id.revision >= 31)
201 		return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM;
202 
203 	return true;
204 }
205