1 /* 2 * Sonics Silicon Backplane 3 * Bus scanning 4 * 5 * Copyright (C) 2005-2007 Michael Buesch <mb@bu3sch.de> 6 * Copyright (C) 2005 Martin Langer <martin-langer@gmx.de> 7 * Copyright (C) 2005 Stefano Brivio <st3@riseup.net> 8 * Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org> 9 * Copyright (C) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch> 10 * Copyright (C) 2006 Broadcom Corporation. 11 * 12 * Licensed under the GNU/GPL. See COPYING for details. 13 */ 14 15 #include <linux/ssb/ssb.h> 16 #include <linux/ssb/ssb_regs.h> 17 #include <linux/pci.h> 18 #include <linux/io.h> 19 20 #include <pcmcia/cistpl.h> 21 #include <pcmcia/ds.h> 22 23 #include "ssb_private.h" 24 25 26 const char *ssb_core_name(u16 coreid) 27 { 28 switch (coreid) { 29 case SSB_DEV_CHIPCOMMON: 30 return "ChipCommon"; 31 case SSB_DEV_ILINE20: 32 return "ILine 20"; 33 case SSB_DEV_SDRAM: 34 return "SDRAM"; 35 case SSB_DEV_PCI: 36 return "PCI"; 37 case SSB_DEV_MIPS: 38 return "MIPS"; 39 case SSB_DEV_ETHERNET: 40 return "Fast Ethernet"; 41 case SSB_DEV_V90: 42 return "V90"; 43 case SSB_DEV_USB11_HOSTDEV: 44 return "USB 1.1 Hostdev"; 45 case SSB_DEV_ADSL: 46 return "ADSL"; 47 case SSB_DEV_ILINE100: 48 return "ILine 100"; 49 case SSB_DEV_IPSEC: 50 return "IPSEC"; 51 case SSB_DEV_PCMCIA: 52 return "PCMCIA"; 53 case SSB_DEV_INTERNAL_MEM: 54 return "Internal Memory"; 55 case SSB_DEV_MEMC_SDRAM: 56 return "MEMC SDRAM"; 57 case SSB_DEV_EXTIF: 58 return "EXTIF"; 59 case SSB_DEV_80211: 60 return "IEEE 802.11"; 61 case SSB_DEV_MIPS_3302: 62 return "MIPS 3302"; 63 case SSB_DEV_USB11_HOST: 64 return "USB 1.1 Host"; 65 case SSB_DEV_USB11_DEV: 66 return "USB 1.1 Device"; 67 case SSB_DEV_USB20_HOST: 68 return "USB 2.0 Host"; 69 case SSB_DEV_USB20_DEV: 70 return "USB 2.0 Device"; 71 case SSB_DEV_SDIO_HOST: 72 return "SDIO Host"; 73 case SSB_DEV_ROBOSWITCH: 74 return "Roboswitch"; 75 case SSB_DEV_PARA_ATA: 76 return "PATA"; 77 case SSB_DEV_SATA_XORDMA: 78 return "SATA XOR-DMA"; 79 case SSB_DEV_ETHERNET_GBIT: 80 return "GBit Ethernet"; 81 case SSB_DEV_PCIE: 82 return "PCI-E"; 83 case SSB_DEV_MIMO_PHY: 84 return "MIMO PHY"; 85 case SSB_DEV_SRAM_CTRLR: 86 return "SRAM Controller"; 87 case SSB_DEV_MINI_MACPHY: 88 return "Mini MACPHY"; 89 case SSB_DEV_ARM_1176: 90 return "ARM 1176"; 91 case SSB_DEV_ARM_7TDMI: 92 return "ARM 7TDMI"; 93 } 94 return "UNKNOWN"; 95 } 96 97 static u16 pcidev_to_chipid(struct pci_dev *pci_dev) 98 { 99 u16 chipid_fallback = 0; 100 101 switch (pci_dev->device) { 102 case 0x4301: 103 chipid_fallback = 0x4301; 104 break; 105 case 0x4305 ... 0x4307: 106 chipid_fallback = 0x4307; 107 break; 108 case 0x4403: 109 chipid_fallback = 0x4402; 110 break; 111 case 0x4610 ... 0x4615: 112 chipid_fallback = 0x4610; 113 break; 114 case 0x4710 ... 0x4715: 115 chipid_fallback = 0x4710; 116 break; 117 case 0x4320 ... 0x4325: 118 chipid_fallback = 0x4309; 119 break; 120 case PCI_DEVICE_ID_BCM4401: 121 case PCI_DEVICE_ID_BCM4401B0: 122 case PCI_DEVICE_ID_BCM4401B1: 123 chipid_fallback = 0x4401; 124 break; 125 default: 126 ssb_printk(KERN_ERR PFX 127 "PCI-ID not in fallback list\n"); 128 } 129 130 return chipid_fallback; 131 } 132 133 static u8 chipid_to_nrcores(u16 chipid) 134 { 135 switch (chipid) { 136 case 0x5365: 137 return 7; 138 case 0x4306: 139 return 6; 140 case 0x4310: 141 return 8; 142 case 0x4307: 143 case 0x4301: 144 return 5; 145 case 0x4401: 146 case 0x4402: 147 return 3; 148 case 0x4710: 149 case 0x4610: 150 case 0x4704: 151 return 9; 152 default: 153 ssb_printk(KERN_ERR PFX 154 "CHIPID not in nrcores fallback list\n"); 155 } 156 157 return 1; 158 } 159 160 static u32 scan_read32(struct ssb_bus *bus, u8 current_coreidx, 161 u16 offset) 162 { 163 u32 lo, hi; 164 165 switch (bus->bustype) { 166 case SSB_BUSTYPE_SSB: 167 offset += current_coreidx * SSB_CORE_SIZE; 168 break; 169 case SSB_BUSTYPE_PCI: 170 break; 171 case SSB_BUSTYPE_PCMCIA: 172 if (offset >= 0x800) { 173 ssb_pcmcia_switch_segment(bus, 1); 174 offset -= 0x800; 175 } else 176 ssb_pcmcia_switch_segment(bus, 0); 177 lo = readw(bus->mmio + offset); 178 hi = readw(bus->mmio + offset + 2); 179 return lo | (hi << 16); 180 case SSB_BUSTYPE_SDIO: 181 offset += current_coreidx * SSB_CORE_SIZE; 182 return ssb_sdio_scan_read32(bus, offset); 183 } 184 return readl(bus->mmio + offset); 185 } 186 187 static int scan_switchcore(struct ssb_bus *bus, u8 coreidx) 188 { 189 switch (bus->bustype) { 190 case SSB_BUSTYPE_SSB: 191 break; 192 case SSB_BUSTYPE_PCI: 193 return ssb_pci_switch_coreidx(bus, coreidx); 194 case SSB_BUSTYPE_PCMCIA: 195 return ssb_pcmcia_switch_coreidx(bus, coreidx); 196 case SSB_BUSTYPE_SDIO: 197 return ssb_sdio_scan_switch_coreidx(bus, coreidx); 198 } 199 return 0; 200 } 201 202 void ssb_iounmap(struct ssb_bus *bus) 203 { 204 switch (bus->bustype) { 205 case SSB_BUSTYPE_SSB: 206 case SSB_BUSTYPE_PCMCIA: 207 iounmap(bus->mmio); 208 break; 209 case SSB_BUSTYPE_PCI: 210 #ifdef CONFIG_SSB_PCIHOST 211 pci_iounmap(bus->host_pci, bus->mmio); 212 #else 213 SSB_BUG_ON(1); /* Can't reach this code. */ 214 #endif 215 break; 216 case SSB_BUSTYPE_SDIO: 217 break; 218 } 219 bus->mmio = NULL; 220 bus->mapped_device = NULL; 221 } 222 223 static void __iomem *ssb_ioremap(struct ssb_bus *bus, 224 unsigned long baseaddr) 225 { 226 void __iomem *mmio = NULL; 227 228 switch (bus->bustype) { 229 case SSB_BUSTYPE_SSB: 230 /* Only map the first core for now. */ 231 /* fallthrough... */ 232 case SSB_BUSTYPE_PCMCIA: 233 mmio = ioremap(baseaddr, SSB_CORE_SIZE); 234 break; 235 case SSB_BUSTYPE_PCI: 236 #ifdef CONFIG_SSB_PCIHOST 237 mmio = pci_iomap(bus->host_pci, 0, ~0UL); 238 #else 239 SSB_BUG_ON(1); /* Can't reach this code. */ 240 #endif 241 break; 242 case SSB_BUSTYPE_SDIO: 243 /* Nothing to ioremap in the SDIO case, just fake it */ 244 mmio = (void __iomem *)baseaddr; 245 break; 246 } 247 248 return mmio; 249 } 250 251 static int we_support_multiple_80211_cores(struct ssb_bus *bus) 252 { 253 /* More than one 802.11 core is only supported by special chips. 254 * There are chips with two 802.11 cores, but with dangling 255 * pins on the second core. Be careful and reject them here. 256 */ 257 258 #ifdef CONFIG_SSB_PCIHOST 259 if (bus->bustype == SSB_BUSTYPE_PCI) { 260 if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM && 261 ((bus->host_pci->device == 0x4313) || 262 (bus->host_pci->device == 0x431A) || 263 (bus->host_pci->device == 0x4321) || 264 (bus->host_pci->device == 0x4324))) 265 return 1; 266 } 267 #endif /* CONFIG_SSB_PCIHOST */ 268 return 0; 269 } 270 271 int ssb_bus_scan(struct ssb_bus *bus, 272 unsigned long baseaddr) 273 { 274 int err = -ENOMEM; 275 void __iomem *mmio; 276 u32 idhi, cc, rev, tmp; 277 int dev_i, i; 278 struct ssb_device *dev; 279 int nr_80211_cores = 0; 280 281 mmio = ssb_ioremap(bus, baseaddr); 282 if (!mmio) 283 goto out; 284 bus->mmio = mmio; 285 286 err = scan_switchcore(bus, 0); /* Switch to first core */ 287 if (err) 288 goto err_unmap; 289 290 idhi = scan_read32(bus, 0, SSB_IDHIGH); 291 cc = (idhi & SSB_IDHIGH_CC) >> SSB_IDHIGH_CC_SHIFT; 292 rev = (idhi & SSB_IDHIGH_RCLO); 293 rev |= (idhi & SSB_IDHIGH_RCHI) >> SSB_IDHIGH_RCHI_SHIFT; 294 295 bus->nr_devices = 0; 296 if (cc == SSB_DEV_CHIPCOMMON) { 297 tmp = scan_read32(bus, 0, SSB_CHIPCO_CHIPID); 298 299 bus->chip_id = (tmp & SSB_CHIPCO_IDMASK); 300 bus->chip_rev = (tmp & SSB_CHIPCO_REVMASK) >> 301 SSB_CHIPCO_REVSHIFT; 302 bus->chip_package = (tmp & SSB_CHIPCO_PACKMASK) >> 303 SSB_CHIPCO_PACKSHIFT; 304 if (rev >= 4) { 305 bus->nr_devices = (tmp & SSB_CHIPCO_NRCORESMASK) >> 306 SSB_CHIPCO_NRCORESSHIFT; 307 } 308 tmp = scan_read32(bus, 0, SSB_CHIPCO_CAP); 309 bus->chipco.capabilities = tmp; 310 } else { 311 if (bus->bustype == SSB_BUSTYPE_PCI) { 312 bus->chip_id = pcidev_to_chipid(bus->host_pci); 313 pci_read_config_byte(bus->host_pci, PCI_REVISION_ID, 314 &bus->chip_rev); 315 bus->chip_package = 0; 316 } else { 317 bus->chip_id = 0x4710; 318 bus->chip_rev = 0; 319 bus->chip_package = 0; 320 } 321 } 322 if (!bus->nr_devices) 323 bus->nr_devices = chipid_to_nrcores(bus->chip_id); 324 if (bus->nr_devices > ARRAY_SIZE(bus->devices)) { 325 ssb_printk(KERN_ERR PFX 326 "More than %d ssb cores found (%d)\n", 327 SSB_MAX_NR_CORES, bus->nr_devices); 328 goto err_unmap; 329 } 330 if (bus->bustype == SSB_BUSTYPE_SSB) { 331 /* Now that we know the number of cores, 332 * remap the whole IO space for all cores. 333 */ 334 err = -ENOMEM; 335 iounmap(mmio); 336 mmio = ioremap(baseaddr, SSB_CORE_SIZE * bus->nr_devices); 337 if (!mmio) 338 goto out; 339 bus->mmio = mmio; 340 } 341 342 /* Fetch basic information about each core/device */ 343 for (i = 0, dev_i = 0; i < bus->nr_devices; i++) { 344 err = scan_switchcore(bus, i); 345 if (err) 346 goto err_unmap; 347 dev = &(bus->devices[dev_i]); 348 349 idhi = scan_read32(bus, i, SSB_IDHIGH); 350 dev->id.coreid = (idhi & SSB_IDHIGH_CC) >> SSB_IDHIGH_CC_SHIFT; 351 dev->id.revision = (idhi & SSB_IDHIGH_RCLO); 352 dev->id.revision |= (idhi & SSB_IDHIGH_RCHI) >> SSB_IDHIGH_RCHI_SHIFT; 353 dev->id.vendor = (idhi & SSB_IDHIGH_VC) >> SSB_IDHIGH_VC_SHIFT; 354 dev->core_index = i; 355 dev->bus = bus; 356 dev->ops = bus->ops; 357 358 printk(KERN_DEBUG PFX 359 "Core %d found: %s " 360 "(cc 0x%03X, rev 0x%02X, vendor 0x%04X)\n", 361 i, ssb_core_name(dev->id.coreid), 362 dev->id.coreid, dev->id.revision, dev->id.vendor); 363 364 switch (dev->id.coreid) { 365 case SSB_DEV_80211: 366 nr_80211_cores++; 367 if (nr_80211_cores > 1) { 368 if (!we_support_multiple_80211_cores(bus)) { 369 ssb_dprintk(KERN_INFO PFX "Ignoring additional " 370 "802.11 core\n"); 371 continue; 372 } 373 } 374 break; 375 case SSB_DEV_EXTIF: 376 #ifdef CONFIG_SSB_DRIVER_EXTIF 377 if (bus->extif.dev) { 378 ssb_printk(KERN_WARNING PFX 379 "WARNING: Multiple EXTIFs found\n"); 380 break; 381 } 382 bus->extif.dev = dev; 383 #endif /* CONFIG_SSB_DRIVER_EXTIF */ 384 break; 385 case SSB_DEV_CHIPCOMMON: 386 if (bus->chipco.dev) { 387 ssb_printk(KERN_WARNING PFX 388 "WARNING: Multiple ChipCommon found\n"); 389 break; 390 } 391 bus->chipco.dev = dev; 392 break; 393 case SSB_DEV_MIPS: 394 case SSB_DEV_MIPS_3302: 395 #ifdef CONFIG_SSB_DRIVER_MIPS 396 if (bus->mipscore.dev) { 397 ssb_printk(KERN_WARNING PFX 398 "WARNING: Multiple MIPS cores found\n"); 399 break; 400 } 401 bus->mipscore.dev = dev; 402 #endif /* CONFIG_SSB_DRIVER_MIPS */ 403 break; 404 case SSB_DEV_PCI: 405 case SSB_DEV_PCIE: 406 #ifdef CONFIG_SSB_DRIVER_PCICORE 407 if (bus->bustype == SSB_BUSTYPE_PCI) { 408 /* Ignore PCI cores on PCI-E cards. 409 * Ignore PCI-E cores on PCI cards. */ 410 if (dev->id.coreid == SSB_DEV_PCI) { 411 if (pci_is_pcie(bus->host_pci)) 412 continue; 413 } else { 414 if (!pci_is_pcie(bus->host_pci)) 415 continue; 416 } 417 } 418 if (bus->pcicore.dev) { 419 ssb_printk(KERN_WARNING PFX 420 "WARNING: Multiple PCI(E) cores found\n"); 421 break; 422 } 423 bus->pcicore.dev = dev; 424 #endif /* CONFIG_SSB_DRIVER_PCICORE */ 425 break; 426 case SSB_DEV_ETHERNET: 427 if (bus->bustype == SSB_BUSTYPE_PCI) { 428 if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM && 429 (bus->host_pci->device & 0xFF00) == 0x4300) { 430 /* This is a dangling ethernet core on a 431 * wireless device. Ignore it. */ 432 continue; 433 } 434 } 435 break; 436 default: 437 break; 438 } 439 440 dev_i++; 441 } 442 bus->nr_devices = dev_i; 443 444 err = 0; 445 out: 446 return err; 447 err_unmap: 448 ssb_iounmap(bus); 449 goto out; 450 } 451