1 /* 2 * Sonics Silicon Backplane PCI-Hostbus related functions. 3 * 4 * Copyright (C) 2005-2006 Michael Buesch <mb@bu3sch.de> 5 * Copyright (C) 2005 Martin Langer <martin-langer@gmx.de> 6 * Copyright (C) 2005 Stefano Brivio <st3@riseup.net> 7 * Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org> 8 * Copyright (C) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch> 9 * 10 * Derived from the Broadcom 4400 device driver. 11 * Copyright (C) 2002 David S. Miller (davem@redhat.com) 12 * Fixed by Pekka Pietikainen (pp@ee.oulu.fi) 13 * Copyright (C) 2006 Broadcom Corporation. 14 * 15 * Licensed under the GNU/GPL. See COPYING for details. 16 */ 17 18 #include <linux/ssb/ssb.h> 19 #include <linux/ssb/ssb_regs.h> 20 #include <linux/slab.h> 21 #include <linux/pci.h> 22 #include <linux/delay.h> 23 24 #include "ssb_private.h" 25 26 27 /* Define the following to 1 to enable a printk on each coreswitch. */ 28 #define SSB_VERBOSE_PCICORESWITCH_DEBUG 0 29 30 31 /* Lowlevel coreswitching */ 32 int ssb_pci_switch_coreidx(struct ssb_bus *bus, u8 coreidx) 33 { 34 int err; 35 int attempts = 0; 36 u32 cur_core; 37 38 while (1) { 39 err = pci_write_config_dword(bus->host_pci, SSB_BAR0_WIN, 40 (coreidx * SSB_CORE_SIZE) 41 + SSB_ENUM_BASE); 42 if (err) 43 goto error; 44 err = pci_read_config_dword(bus->host_pci, SSB_BAR0_WIN, 45 &cur_core); 46 if (err) 47 goto error; 48 cur_core = (cur_core - SSB_ENUM_BASE) 49 / SSB_CORE_SIZE; 50 if (cur_core == coreidx) 51 break; 52 53 if (attempts++ > SSB_BAR0_MAX_RETRIES) 54 goto error; 55 udelay(10); 56 } 57 return 0; 58 error: 59 ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx); 60 return -ENODEV; 61 } 62 63 int ssb_pci_switch_core(struct ssb_bus *bus, 64 struct ssb_device *dev) 65 { 66 int err; 67 unsigned long flags; 68 69 #if SSB_VERBOSE_PCICORESWITCH_DEBUG 70 ssb_printk(KERN_INFO PFX 71 "Switching to %s core, index %d\n", 72 ssb_core_name(dev->id.coreid), 73 dev->core_index); 74 #endif 75 76 spin_lock_irqsave(&bus->bar_lock, flags); 77 err = ssb_pci_switch_coreidx(bus, dev->core_index); 78 if (!err) 79 bus->mapped_device = dev; 80 spin_unlock_irqrestore(&bus->bar_lock, flags); 81 82 return err; 83 } 84 85 /* Enable/disable the on board crystal oscillator and/or PLL. */ 86 int ssb_pci_xtal(struct ssb_bus *bus, u32 what, int turn_on) 87 { 88 int err; 89 u32 in, out, outenable; 90 u16 pci_status; 91 92 if (bus->bustype != SSB_BUSTYPE_PCI) 93 return 0; 94 95 err = pci_read_config_dword(bus->host_pci, SSB_GPIO_IN, &in); 96 if (err) 97 goto err_pci; 98 err = pci_read_config_dword(bus->host_pci, SSB_GPIO_OUT, &out); 99 if (err) 100 goto err_pci; 101 err = pci_read_config_dword(bus->host_pci, SSB_GPIO_OUT_ENABLE, &outenable); 102 if (err) 103 goto err_pci; 104 105 outenable |= what; 106 107 if (turn_on) { 108 /* Avoid glitching the clock if GPRS is already using it. 109 * We can't actually read the state of the PLLPD so we infer it 110 * by the value of XTAL_PU which *is* readable via gpioin. 111 */ 112 if (!(in & SSB_GPIO_XTAL)) { 113 if (what & SSB_GPIO_XTAL) { 114 /* Turn the crystal on */ 115 out |= SSB_GPIO_XTAL; 116 if (what & SSB_GPIO_PLL) 117 out |= SSB_GPIO_PLL; 118 err = pci_write_config_dword(bus->host_pci, SSB_GPIO_OUT, out); 119 if (err) 120 goto err_pci; 121 err = pci_write_config_dword(bus->host_pci, SSB_GPIO_OUT_ENABLE, 122 outenable); 123 if (err) 124 goto err_pci; 125 msleep(1); 126 } 127 if (what & SSB_GPIO_PLL) { 128 /* Turn the PLL on */ 129 out &= ~SSB_GPIO_PLL; 130 err = pci_write_config_dword(bus->host_pci, SSB_GPIO_OUT, out); 131 if (err) 132 goto err_pci; 133 msleep(5); 134 } 135 } 136 137 err = pci_read_config_word(bus->host_pci, PCI_STATUS, &pci_status); 138 if (err) 139 goto err_pci; 140 pci_status &= ~PCI_STATUS_SIG_TARGET_ABORT; 141 err = pci_write_config_word(bus->host_pci, PCI_STATUS, pci_status); 142 if (err) 143 goto err_pci; 144 } else { 145 if (what & SSB_GPIO_XTAL) { 146 /* Turn the crystal off */ 147 out &= ~SSB_GPIO_XTAL; 148 } 149 if (what & SSB_GPIO_PLL) { 150 /* Turn the PLL off */ 151 out |= SSB_GPIO_PLL; 152 } 153 err = pci_write_config_dword(bus->host_pci, SSB_GPIO_OUT, out); 154 if (err) 155 goto err_pci; 156 err = pci_write_config_dword(bus->host_pci, SSB_GPIO_OUT_ENABLE, outenable); 157 if (err) 158 goto err_pci; 159 } 160 161 out: 162 return err; 163 164 err_pci: 165 printk(KERN_ERR PFX "Error: ssb_pci_xtal() could not access PCI config space!\n"); 166 err = -EBUSY; 167 goto out; 168 } 169 170 /* Get the word-offset for a SSB_SPROM_XXX define. */ 171 #define SPOFF(offset) ((offset) / sizeof(u16)) 172 /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */ 173 #define SPEX16(_outvar, _offset, _mask, _shift) \ 174 out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift)) 175 #define SPEX32(_outvar, _offset, _mask, _shift) \ 176 out->_outvar = ((((u32)in[SPOFF((_offset)+2)] << 16 | \ 177 in[SPOFF(_offset)]) & (_mask)) >> (_shift)) 178 #define SPEX(_outvar, _offset, _mask, _shift) \ 179 SPEX16(_outvar, _offset, _mask, _shift) 180 181 182 static inline u8 ssb_crc8(u8 crc, u8 data) 183 { 184 /* Polynomial: x^8 + x^7 + x^6 + x^4 + x^2 + 1 */ 185 static const u8 t[] = { 186 0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B, 187 0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21, 188 0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF, 189 0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5, 190 0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14, 191 0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E, 192 0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80, 193 0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA, 194 0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95, 195 0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF, 196 0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01, 197 0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B, 198 0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA, 199 0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0, 200 0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E, 201 0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34, 202 0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0, 203 0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A, 204 0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54, 205 0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E, 206 0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF, 207 0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5, 208 0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B, 209 0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61, 210 0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E, 211 0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74, 212 0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA, 213 0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0, 214 0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41, 215 0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B, 216 0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5, 217 0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F, 218 }; 219 return t[crc ^ data]; 220 } 221 222 static u8 ssb_sprom_crc(const u16 *sprom, u16 size) 223 { 224 int word; 225 u8 crc = 0xFF; 226 227 for (word = 0; word < size - 1; word++) { 228 crc = ssb_crc8(crc, sprom[word] & 0x00FF); 229 crc = ssb_crc8(crc, (sprom[word] & 0xFF00) >> 8); 230 } 231 crc = ssb_crc8(crc, sprom[size - 1] & 0x00FF); 232 crc ^= 0xFF; 233 234 return crc; 235 } 236 237 static int sprom_check_crc(const u16 *sprom, size_t size) 238 { 239 u8 crc; 240 u8 expected_crc; 241 u16 tmp; 242 243 crc = ssb_sprom_crc(sprom, size); 244 tmp = sprom[size - 1] & SSB_SPROM_REVISION_CRC; 245 expected_crc = tmp >> SSB_SPROM_REVISION_CRC_SHIFT; 246 if (crc != expected_crc) 247 return -EPROTO; 248 249 return 0; 250 } 251 252 static int sprom_do_read(struct ssb_bus *bus, u16 *sprom) 253 { 254 int i; 255 256 for (i = 0; i < bus->sprom_size; i++) 257 sprom[i] = ioread16(bus->mmio + bus->sprom_offset + (i * 2)); 258 259 return 0; 260 } 261 262 static int sprom_do_write(struct ssb_bus *bus, const u16 *sprom) 263 { 264 struct pci_dev *pdev = bus->host_pci; 265 int i, err; 266 u32 spromctl; 267 u16 size = bus->sprom_size; 268 269 ssb_printk(KERN_NOTICE PFX "Writing SPROM. Do NOT turn off the power! Please stand by...\n"); 270 err = pci_read_config_dword(pdev, SSB_SPROMCTL, &spromctl); 271 if (err) 272 goto err_ctlreg; 273 spromctl |= SSB_SPROMCTL_WE; 274 err = pci_write_config_dword(pdev, SSB_SPROMCTL, spromctl); 275 if (err) 276 goto err_ctlreg; 277 ssb_printk(KERN_NOTICE PFX "[ 0%%"); 278 msleep(500); 279 for (i = 0; i < size; i++) { 280 if (i == size / 4) 281 ssb_printk("25%%"); 282 else if (i == size / 2) 283 ssb_printk("50%%"); 284 else if (i == (size * 3) / 4) 285 ssb_printk("75%%"); 286 else if (i % 2) 287 ssb_printk("."); 288 writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2)); 289 mmiowb(); 290 msleep(20); 291 } 292 err = pci_read_config_dword(pdev, SSB_SPROMCTL, &spromctl); 293 if (err) 294 goto err_ctlreg; 295 spromctl &= ~SSB_SPROMCTL_WE; 296 err = pci_write_config_dword(pdev, SSB_SPROMCTL, spromctl); 297 if (err) 298 goto err_ctlreg; 299 msleep(500); 300 ssb_printk("100%% ]\n"); 301 ssb_printk(KERN_NOTICE PFX "SPROM written.\n"); 302 303 return 0; 304 err_ctlreg: 305 ssb_printk(KERN_ERR PFX "Could not access SPROM control register.\n"); 306 return err; 307 } 308 309 static s8 r123_extract_antgain(u8 sprom_revision, const u16 *in, 310 u16 mask, u16 shift) 311 { 312 u16 v; 313 u8 gain; 314 315 v = in[SPOFF(SSB_SPROM1_AGAIN)]; 316 gain = (v & mask) >> shift; 317 if (gain == 0xFF) 318 gain = 2; /* If unset use 2dBm */ 319 if (sprom_revision == 1) { 320 /* Convert to Q5.2 */ 321 gain <<= 2; 322 } else { 323 /* Q5.2 Fractional part is stored in 0xC0 */ 324 gain = ((gain & 0xC0) >> 6) | ((gain & 0x3F) << 2); 325 } 326 327 return (s8)gain; 328 } 329 330 static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in) 331 { 332 int i; 333 u16 v; 334 s8 gain; 335 u16 loc[3]; 336 337 if (out->revision == 3) /* rev 3 moved MAC */ 338 loc[0] = SSB_SPROM3_IL0MAC; 339 else { 340 loc[0] = SSB_SPROM1_IL0MAC; 341 loc[1] = SSB_SPROM1_ET0MAC; 342 loc[2] = SSB_SPROM1_ET1MAC; 343 } 344 for (i = 0; i < 3; i++) { 345 v = in[SPOFF(loc[0]) + i]; 346 *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v); 347 } 348 if (out->revision < 3) { /* only rev 1-2 have et0, et1 */ 349 for (i = 0; i < 3; i++) { 350 v = in[SPOFF(loc[1]) + i]; 351 *(((__be16 *)out->et0mac) + i) = cpu_to_be16(v); 352 } 353 for (i = 0; i < 3; i++) { 354 v = in[SPOFF(loc[2]) + i]; 355 *(((__be16 *)out->et1mac) + i) = cpu_to_be16(v); 356 } 357 } 358 SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0); 359 SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A, 360 SSB_SPROM1_ETHPHY_ET1A_SHIFT); 361 SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14); 362 SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15); 363 SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0); 364 SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE, 365 SSB_SPROM1_BINF_CCODE_SHIFT); 366 SPEX(ant_available_a, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTA, 367 SSB_SPROM1_BINF_ANTA_SHIFT); 368 SPEX(ant_available_bg, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTBG, 369 SSB_SPROM1_BINF_ANTBG_SHIFT); 370 SPEX(pa0b0, SSB_SPROM1_PA0B0, 0xFFFF, 0); 371 SPEX(pa0b1, SSB_SPROM1_PA0B1, 0xFFFF, 0); 372 SPEX(pa0b2, SSB_SPROM1_PA0B2, 0xFFFF, 0); 373 SPEX(pa1b0, SSB_SPROM1_PA1B0, 0xFFFF, 0); 374 SPEX(pa1b1, SSB_SPROM1_PA1B1, 0xFFFF, 0); 375 SPEX(pa1b2, SSB_SPROM1_PA1B2, 0xFFFF, 0); 376 SPEX(gpio0, SSB_SPROM1_GPIOA, SSB_SPROM1_GPIOA_P0, 0); 377 SPEX(gpio1, SSB_SPROM1_GPIOA, SSB_SPROM1_GPIOA_P1, 378 SSB_SPROM1_GPIOA_P1_SHIFT); 379 SPEX(gpio2, SSB_SPROM1_GPIOB, SSB_SPROM1_GPIOB_P2, 0); 380 SPEX(gpio3, SSB_SPROM1_GPIOB, SSB_SPROM1_GPIOB_P3, 381 SSB_SPROM1_GPIOB_P3_SHIFT); 382 SPEX(maxpwr_a, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_A, 383 SSB_SPROM1_MAXPWR_A_SHIFT); 384 SPEX(maxpwr_bg, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_BG, 0); 385 SPEX(itssi_a, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_A, 386 SSB_SPROM1_ITSSI_A_SHIFT); 387 SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0); 388 SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0); 389 if (out->revision >= 2) 390 SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0); 391 392 /* Extract the antenna gain values. */ 393 gain = r123_extract_antgain(out->revision, in, 394 SSB_SPROM1_AGAIN_BG, 395 SSB_SPROM1_AGAIN_BG_SHIFT); 396 out->antenna_gain.ghz24.a0 = gain; 397 out->antenna_gain.ghz24.a1 = gain; 398 out->antenna_gain.ghz24.a2 = gain; 399 out->antenna_gain.ghz24.a3 = gain; 400 gain = r123_extract_antgain(out->revision, in, 401 SSB_SPROM1_AGAIN_A, 402 SSB_SPROM1_AGAIN_A_SHIFT); 403 out->antenna_gain.ghz5.a0 = gain; 404 out->antenna_gain.ghz5.a1 = gain; 405 out->antenna_gain.ghz5.a2 = gain; 406 out->antenna_gain.ghz5.a3 = gain; 407 } 408 409 /* Revs 4 5 and 8 have partially shared layout */ 410 static void sprom_extract_r458(struct ssb_sprom *out, const u16 *in) 411 { 412 SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, 413 SSB_SPROM4_TXPID2G0, SSB_SPROM4_TXPID2G0_SHIFT); 414 SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01, 415 SSB_SPROM4_TXPID2G1, SSB_SPROM4_TXPID2G1_SHIFT); 416 SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23, 417 SSB_SPROM4_TXPID2G2, SSB_SPROM4_TXPID2G2_SHIFT); 418 SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23, 419 SSB_SPROM4_TXPID2G3, SSB_SPROM4_TXPID2G3_SHIFT); 420 421 SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01, 422 SSB_SPROM4_TXPID5GL0, SSB_SPROM4_TXPID5GL0_SHIFT); 423 SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01, 424 SSB_SPROM4_TXPID5GL1, SSB_SPROM4_TXPID5GL1_SHIFT); 425 SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23, 426 SSB_SPROM4_TXPID5GL2, SSB_SPROM4_TXPID5GL2_SHIFT); 427 SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23, 428 SSB_SPROM4_TXPID5GL3, SSB_SPROM4_TXPID5GL3_SHIFT); 429 430 SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01, 431 SSB_SPROM4_TXPID5G0, SSB_SPROM4_TXPID5G0_SHIFT); 432 SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01, 433 SSB_SPROM4_TXPID5G1, SSB_SPROM4_TXPID5G1_SHIFT); 434 SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23, 435 SSB_SPROM4_TXPID5G2, SSB_SPROM4_TXPID5G2_SHIFT); 436 SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23, 437 SSB_SPROM4_TXPID5G3, SSB_SPROM4_TXPID5G3_SHIFT); 438 439 SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01, 440 SSB_SPROM4_TXPID5GH0, SSB_SPROM4_TXPID5GH0_SHIFT); 441 SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01, 442 SSB_SPROM4_TXPID5GH1, SSB_SPROM4_TXPID5GH1_SHIFT); 443 SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23, 444 SSB_SPROM4_TXPID5GH2, SSB_SPROM4_TXPID5GH2_SHIFT); 445 SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23, 446 SSB_SPROM4_TXPID5GH3, SSB_SPROM4_TXPID5GH3_SHIFT); 447 } 448 449 static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in) 450 { 451 int i; 452 u16 v; 453 u16 il0mac_offset; 454 455 if (out->revision == 4) 456 il0mac_offset = SSB_SPROM4_IL0MAC; 457 else 458 il0mac_offset = SSB_SPROM5_IL0MAC; 459 /* extract the MAC address */ 460 for (i = 0; i < 3; i++) { 461 v = in[SPOFF(il0mac_offset) + i]; 462 *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v); 463 } 464 SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0); 465 SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A, 466 SSB_SPROM4_ETHPHY_ET1A_SHIFT); 467 if (out->revision == 4) { 468 SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0); 469 SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0); 470 SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0); 471 SPEX(boardflags2_lo, SSB_SPROM4_BFL2LO, 0xFFFF, 0); 472 SPEX(boardflags2_hi, SSB_SPROM4_BFL2HI, 0xFFFF, 0); 473 } else { 474 SPEX(country_code, SSB_SPROM5_CCODE, 0xFFFF, 0); 475 SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0); 476 SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0); 477 SPEX(boardflags2_lo, SSB_SPROM5_BFL2LO, 0xFFFF, 0); 478 SPEX(boardflags2_hi, SSB_SPROM5_BFL2HI, 0xFFFF, 0); 479 } 480 SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A, 481 SSB_SPROM4_ANTAVAIL_A_SHIFT); 482 SPEX(ant_available_bg, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_BG, 483 SSB_SPROM4_ANTAVAIL_BG_SHIFT); 484 SPEX(maxpwr_bg, SSB_SPROM4_MAXP_BG, SSB_SPROM4_MAXP_BG_MASK, 0); 485 SPEX(itssi_bg, SSB_SPROM4_MAXP_BG, SSB_SPROM4_ITSSI_BG, 486 SSB_SPROM4_ITSSI_BG_SHIFT); 487 SPEX(maxpwr_a, SSB_SPROM4_MAXP_A, SSB_SPROM4_MAXP_A_MASK, 0); 488 SPEX(itssi_a, SSB_SPROM4_MAXP_A, SSB_SPROM4_ITSSI_A, 489 SSB_SPROM4_ITSSI_A_SHIFT); 490 if (out->revision == 4) { 491 SPEX(gpio0, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P0, 0); 492 SPEX(gpio1, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P1, 493 SSB_SPROM4_GPIOA_P1_SHIFT); 494 SPEX(gpio2, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P2, 0); 495 SPEX(gpio3, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P3, 496 SSB_SPROM4_GPIOB_P3_SHIFT); 497 } else { 498 SPEX(gpio0, SSB_SPROM5_GPIOA, SSB_SPROM5_GPIOA_P0, 0); 499 SPEX(gpio1, SSB_SPROM5_GPIOA, SSB_SPROM5_GPIOA_P1, 500 SSB_SPROM5_GPIOA_P1_SHIFT); 501 SPEX(gpio2, SSB_SPROM5_GPIOB, SSB_SPROM5_GPIOB_P2, 0); 502 SPEX(gpio3, SSB_SPROM5_GPIOB, SSB_SPROM5_GPIOB_P3, 503 SSB_SPROM5_GPIOB_P3_SHIFT); 504 } 505 506 /* Extract the antenna gain values. */ 507 SPEX(antenna_gain.ghz24.a0, SSB_SPROM4_AGAIN01, 508 SSB_SPROM4_AGAIN0, SSB_SPROM4_AGAIN0_SHIFT); 509 SPEX(antenna_gain.ghz24.a1, SSB_SPROM4_AGAIN01, 510 SSB_SPROM4_AGAIN1, SSB_SPROM4_AGAIN1_SHIFT); 511 SPEX(antenna_gain.ghz24.a2, SSB_SPROM4_AGAIN23, 512 SSB_SPROM4_AGAIN2, SSB_SPROM4_AGAIN2_SHIFT); 513 SPEX(antenna_gain.ghz24.a3, SSB_SPROM4_AGAIN23, 514 SSB_SPROM4_AGAIN3, SSB_SPROM4_AGAIN3_SHIFT); 515 memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, 516 sizeof(out->antenna_gain.ghz5)); 517 518 sprom_extract_r458(out, in); 519 520 /* TODO - get remaining rev 4 stuff needed */ 521 } 522 523 static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) 524 { 525 int i; 526 u16 v; 527 528 /* extract the MAC address */ 529 for (i = 0; i < 3; i++) { 530 v = in[SPOFF(SSB_SPROM8_IL0MAC) + i]; 531 *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v); 532 } 533 SPEX(country_code, SSB_SPROM8_CCODE, 0xFFFF, 0); 534 SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0); 535 SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0); 536 SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0); 537 SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, 0xFFFF, 0); 538 SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A, 539 SSB_SPROM8_ANTAVAIL_A_SHIFT); 540 SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG, 541 SSB_SPROM8_ANTAVAIL_BG_SHIFT); 542 SPEX(maxpwr_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_MAXP_BG_MASK, 0); 543 SPEX(itssi_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_ITSSI_BG, 544 SSB_SPROM8_ITSSI_BG_SHIFT); 545 SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0); 546 SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A, 547 SSB_SPROM8_ITSSI_A_SHIFT); 548 SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0); 549 SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK, 550 SSB_SPROM8_MAXP_AL_SHIFT); 551 SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0); 552 SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1, 553 SSB_SPROM8_GPIOA_P1_SHIFT); 554 SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0); 555 SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3, 556 SSB_SPROM8_GPIOB_P3_SHIFT); 557 SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0); 558 SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G, 559 SSB_SPROM8_TRI5G_SHIFT); 560 SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0); 561 SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH, 562 SSB_SPROM8_TRI5GH_SHIFT); 563 SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G, 0); 564 SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G, 565 SSB_SPROM8_RXPO5G_SHIFT); 566 SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0); 567 SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G, 568 SSB_SPROM8_RSSISMC2G_SHIFT); 569 SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G, 570 SSB_SPROM8_RSSISAV2G_SHIFT); 571 SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G, 572 SSB_SPROM8_BXA2G_SHIFT); 573 SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0); 574 SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G, 575 SSB_SPROM8_RSSISMC5G_SHIFT); 576 SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G, 577 SSB_SPROM8_RSSISAV5G_SHIFT); 578 SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G, 579 SSB_SPROM8_BXA5G_SHIFT); 580 SPEX(pa0b0, SSB_SPROM8_PA0B0, 0xFFFF, 0); 581 SPEX(pa0b1, SSB_SPROM8_PA0B1, 0xFFFF, 0); 582 SPEX(pa0b2, SSB_SPROM8_PA0B2, 0xFFFF, 0); 583 SPEX(pa1b0, SSB_SPROM8_PA1B0, 0xFFFF, 0); 584 SPEX(pa1b1, SSB_SPROM8_PA1B1, 0xFFFF, 0); 585 SPEX(pa1b2, SSB_SPROM8_PA1B2, 0xFFFF, 0); 586 SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, 0xFFFF, 0); 587 SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, 0xFFFF, 0); 588 SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, 0xFFFF, 0); 589 SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, 0xFFFF, 0); 590 SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, 0xFFFF, 0); 591 SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, 0xFFFF, 0); 592 SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, 0xFFFF, 0); 593 SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, 0xFFFFFFFF, 0); 594 SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, 0xFFFFFFFF, 0); 595 SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, 0xFFFFFFFF, 0); 596 SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0); 597 598 /* Extract the antenna gain values. */ 599 SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01, 600 SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT); 601 SPEX(antenna_gain.ghz24.a1, SSB_SPROM8_AGAIN01, 602 SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT); 603 SPEX(antenna_gain.ghz24.a2, SSB_SPROM8_AGAIN23, 604 SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT); 605 SPEX(antenna_gain.ghz24.a3, SSB_SPROM8_AGAIN23, 606 SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT); 607 memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, 608 sizeof(out->antenna_gain.ghz5)); 609 610 sprom_extract_r458(out, in); 611 612 /* TODO - get remaining rev 8 stuff needed */ 613 } 614 615 static int sprom_extract(struct ssb_bus *bus, struct ssb_sprom *out, 616 const u16 *in, u16 size) 617 { 618 memset(out, 0, sizeof(*out)); 619 620 out->revision = in[size - 1] & 0x00FF; 621 ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision); 622 memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */ 623 memset(out->et1mac, 0xFF, 6); 624 625 if ((bus->chip_id & 0xFF00) == 0x4400) { 626 /* Workaround: The BCM44XX chip has a stupid revision 627 * number stored in the SPROM. 628 * Always extract r1. */ 629 out->revision = 1; 630 ssb_dprintk(KERN_DEBUG PFX "SPROM treated as revision %d\n", out->revision); 631 } 632 633 switch (out->revision) { 634 case 1: 635 case 2: 636 case 3: 637 sprom_extract_r123(out, in); 638 break; 639 case 4: 640 case 5: 641 sprom_extract_r45(out, in); 642 break; 643 case 8: 644 sprom_extract_r8(out, in); 645 break; 646 default: 647 ssb_printk(KERN_WARNING PFX "Unsupported SPROM" 648 " revision %d detected. Will extract" 649 " v1\n", out->revision); 650 out->revision = 1; 651 sprom_extract_r123(out, in); 652 } 653 654 if (out->boardflags_lo == 0xFFFF) 655 out->boardflags_lo = 0; /* per specs */ 656 if (out->boardflags_hi == 0xFFFF) 657 out->boardflags_hi = 0; /* per specs */ 658 659 return 0; 660 } 661 662 static int ssb_pci_sprom_get(struct ssb_bus *bus, 663 struct ssb_sprom *sprom) 664 { 665 int err; 666 u16 *buf; 667 668 if (!ssb_is_sprom_available(bus)) { 669 ssb_printk(KERN_ERR PFX "No SPROM available!\n"); 670 return -ENODEV; 671 } 672 if (bus->chipco.dev) { /* can be unavailable! */ 673 /* 674 * get SPROM offset: SSB_SPROM_BASE1 except for 675 * chipcommon rev >= 31 or chip ID is 0x4312 and 676 * chipcommon status & 3 == 2 677 */ 678 if (bus->chipco.dev->id.revision >= 31) 679 bus->sprom_offset = SSB_SPROM_BASE31; 680 else if (bus->chip_id == 0x4312 && 681 (bus->chipco.status & 0x03) == 2) 682 bus->sprom_offset = SSB_SPROM_BASE31; 683 else 684 bus->sprom_offset = SSB_SPROM_BASE1; 685 } else { 686 bus->sprom_offset = SSB_SPROM_BASE1; 687 } 688 ssb_dprintk(KERN_INFO PFX "SPROM offset is 0x%x\n", bus->sprom_offset); 689 690 buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL); 691 if (!buf) 692 return -ENOMEM; 693 bus->sprom_size = SSB_SPROMSIZE_WORDS_R123; 694 sprom_do_read(bus, buf); 695 err = sprom_check_crc(buf, bus->sprom_size); 696 if (err) { 697 /* try for a 440 byte SPROM - revision 4 and higher */ 698 kfree(buf); 699 buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), 700 GFP_KERNEL); 701 if (!buf) 702 return -ENOMEM; 703 bus->sprom_size = SSB_SPROMSIZE_WORDS_R4; 704 sprom_do_read(bus, buf); 705 err = sprom_check_crc(buf, bus->sprom_size); 706 if (err) { 707 /* All CRC attempts failed. 708 * Maybe there is no SPROM on the device? 709 * Now we ask the arch code if there is some sprom 710 * available for this device in some other storage */ 711 err = ssb_fill_sprom_with_fallback(bus, sprom); 712 if (err) { 713 ssb_printk(KERN_WARNING PFX "WARNING: Using" 714 " fallback SPROM failed (err %d)\n", 715 err); 716 } else { 717 ssb_dprintk(KERN_DEBUG PFX "Using SPROM" 718 " revision %d provided by" 719 " platform.\n", sprom->revision); 720 err = 0; 721 goto out_free; 722 } 723 ssb_printk(KERN_WARNING PFX "WARNING: Invalid" 724 " SPROM CRC (corrupt SPROM)\n"); 725 } 726 } 727 err = sprom_extract(bus, sprom, buf, bus->sprom_size); 728 729 out_free: 730 kfree(buf); 731 return err; 732 } 733 734 static void ssb_pci_get_boardinfo(struct ssb_bus *bus, 735 struct ssb_boardinfo *bi) 736 { 737 pci_read_config_word(bus->host_pci, PCI_SUBSYSTEM_VENDOR_ID, 738 &bi->vendor); 739 pci_read_config_word(bus->host_pci, PCI_SUBSYSTEM_ID, 740 &bi->type); 741 pci_read_config_byte(bus->host_pci, PCI_REVISION_ID, 742 &bi->rev); 743 } 744 745 int ssb_pci_get_invariants(struct ssb_bus *bus, 746 struct ssb_init_invariants *iv) 747 { 748 int err; 749 750 err = ssb_pci_sprom_get(bus, &iv->sprom); 751 if (err) 752 goto out; 753 ssb_pci_get_boardinfo(bus, &iv->boardinfo); 754 755 out: 756 return err; 757 } 758 759 #ifdef CONFIG_SSB_DEBUG 760 static int ssb_pci_assert_buspower(struct ssb_bus *bus) 761 { 762 if (likely(bus->powered_up)) 763 return 0; 764 765 printk(KERN_ERR PFX "FATAL ERROR: Bus powered down " 766 "while accessing PCI MMIO space\n"); 767 if (bus->power_warn_count <= 10) { 768 bus->power_warn_count++; 769 dump_stack(); 770 } 771 772 return -ENODEV; 773 } 774 #else /* DEBUG */ 775 static inline int ssb_pci_assert_buspower(struct ssb_bus *bus) 776 { 777 return 0; 778 } 779 #endif /* DEBUG */ 780 781 static u8 ssb_pci_read8(struct ssb_device *dev, u16 offset) 782 { 783 struct ssb_bus *bus = dev->bus; 784 785 if (unlikely(ssb_pci_assert_buspower(bus))) 786 return 0xFF; 787 if (unlikely(bus->mapped_device != dev)) { 788 if (unlikely(ssb_pci_switch_core(bus, dev))) 789 return 0xFF; 790 } 791 return ioread8(bus->mmio + offset); 792 } 793 794 static u16 ssb_pci_read16(struct ssb_device *dev, u16 offset) 795 { 796 struct ssb_bus *bus = dev->bus; 797 798 if (unlikely(ssb_pci_assert_buspower(bus))) 799 return 0xFFFF; 800 if (unlikely(bus->mapped_device != dev)) { 801 if (unlikely(ssb_pci_switch_core(bus, dev))) 802 return 0xFFFF; 803 } 804 return ioread16(bus->mmio + offset); 805 } 806 807 static u32 ssb_pci_read32(struct ssb_device *dev, u16 offset) 808 { 809 struct ssb_bus *bus = dev->bus; 810 811 if (unlikely(ssb_pci_assert_buspower(bus))) 812 return 0xFFFFFFFF; 813 if (unlikely(bus->mapped_device != dev)) { 814 if (unlikely(ssb_pci_switch_core(bus, dev))) 815 return 0xFFFFFFFF; 816 } 817 return ioread32(bus->mmio + offset); 818 } 819 820 #ifdef CONFIG_SSB_BLOCKIO 821 static void ssb_pci_block_read(struct ssb_device *dev, void *buffer, 822 size_t count, u16 offset, u8 reg_width) 823 { 824 struct ssb_bus *bus = dev->bus; 825 void __iomem *addr = bus->mmio + offset; 826 827 if (unlikely(ssb_pci_assert_buspower(bus))) 828 goto error; 829 if (unlikely(bus->mapped_device != dev)) { 830 if (unlikely(ssb_pci_switch_core(bus, dev))) 831 goto error; 832 } 833 switch (reg_width) { 834 case sizeof(u8): 835 ioread8_rep(addr, buffer, count); 836 break; 837 case sizeof(u16): 838 SSB_WARN_ON(count & 1); 839 ioread16_rep(addr, buffer, count >> 1); 840 break; 841 case sizeof(u32): 842 SSB_WARN_ON(count & 3); 843 ioread32_rep(addr, buffer, count >> 2); 844 break; 845 default: 846 SSB_WARN_ON(1); 847 } 848 849 return; 850 error: 851 memset(buffer, 0xFF, count); 852 } 853 #endif /* CONFIG_SSB_BLOCKIO */ 854 855 static void ssb_pci_write8(struct ssb_device *dev, u16 offset, u8 value) 856 { 857 struct ssb_bus *bus = dev->bus; 858 859 if (unlikely(ssb_pci_assert_buspower(bus))) 860 return; 861 if (unlikely(bus->mapped_device != dev)) { 862 if (unlikely(ssb_pci_switch_core(bus, dev))) 863 return; 864 } 865 iowrite8(value, bus->mmio + offset); 866 } 867 868 static void ssb_pci_write16(struct ssb_device *dev, u16 offset, u16 value) 869 { 870 struct ssb_bus *bus = dev->bus; 871 872 if (unlikely(ssb_pci_assert_buspower(bus))) 873 return; 874 if (unlikely(bus->mapped_device != dev)) { 875 if (unlikely(ssb_pci_switch_core(bus, dev))) 876 return; 877 } 878 iowrite16(value, bus->mmio + offset); 879 } 880 881 static void ssb_pci_write32(struct ssb_device *dev, u16 offset, u32 value) 882 { 883 struct ssb_bus *bus = dev->bus; 884 885 if (unlikely(ssb_pci_assert_buspower(bus))) 886 return; 887 if (unlikely(bus->mapped_device != dev)) { 888 if (unlikely(ssb_pci_switch_core(bus, dev))) 889 return; 890 } 891 iowrite32(value, bus->mmio + offset); 892 } 893 894 #ifdef CONFIG_SSB_BLOCKIO 895 static void ssb_pci_block_write(struct ssb_device *dev, const void *buffer, 896 size_t count, u16 offset, u8 reg_width) 897 { 898 struct ssb_bus *bus = dev->bus; 899 void __iomem *addr = bus->mmio + offset; 900 901 if (unlikely(ssb_pci_assert_buspower(bus))) 902 return; 903 if (unlikely(bus->mapped_device != dev)) { 904 if (unlikely(ssb_pci_switch_core(bus, dev))) 905 return; 906 } 907 switch (reg_width) { 908 case sizeof(u8): 909 iowrite8_rep(addr, buffer, count); 910 break; 911 case sizeof(u16): 912 SSB_WARN_ON(count & 1); 913 iowrite16_rep(addr, buffer, count >> 1); 914 break; 915 case sizeof(u32): 916 SSB_WARN_ON(count & 3); 917 iowrite32_rep(addr, buffer, count >> 2); 918 break; 919 default: 920 SSB_WARN_ON(1); 921 } 922 } 923 #endif /* CONFIG_SSB_BLOCKIO */ 924 925 /* Not "static", as it's used in main.c */ 926 const struct ssb_bus_ops ssb_pci_ops = { 927 .read8 = ssb_pci_read8, 928 .read16 = ssb_pci_read16, 929 .read32 = ssb_pci_read32, 930 .write8 = ssb_pci_write8, 931 .write16 = ssb_pci_write16, 932 .write32 = ssb_pci_write32, 933 #ifdef CONFIG_SSB_BLOCKIO 934 .block_read = ssb_pci_block_read, 935 .block_write = ssb_pci_block_write, 936 #endif 937 }; 938 939 static ssize_t ssb_pci_attr_sprom_show(struct device *pcidev, 940 struct device_attribute *attr, 941 char *buf) 942 { 943 struct pci_dev *pdev = container_of(pcidev, struct pci_dev, dev); 944 struct ssb_bus *bus; 945 946 bus = ssb_pci_dev_to_bus(pdev); 947 if (!bus) 948 return -ENODEV; 949 950 return ssb_attr_sprom_show(bus, buf, sprom_do_read); 951 } 952 953 static ssize_t ssb_pci_attr_sprom_store(struct device *pcidev, 954 struct device_attribute *attr, 955 const char *buf, size_t count) 956 { 957 struct pci_dev *pdev = container_of(pcidev, struct pci_dev, dev); 958 struct ssb_bus *bus; 959 960 bus = ssb_pci_dev_to_bus(pdev); 961 if (!bus) 962 return -ENODEV; 963 964 return ssb_attr_sprom_store(bus, buf, count, 965 sprom_check_crc, sprom_do_write); 966 } 967 968 static DEVICE_ATTR(ssb_sprom, 0600, 969 ssb_pci_attr_sprom_show, 970 ssb_pci_attr_sprom_store); 971 972 void ssb_pci_exit(struct ssb_bus *bus) 973 { 974 struct pci_dev *pdev; 975 976 if (bus->bustype != SSB_BUSTYPE_PCI) 977 return; 978 979 pdev = bus->host_pci; 980 device_remove_file(&pdev->dev, &dev_attr_ssb_sprom); 981 } 982 983 int ssb_pci_init(struct ssb_bus *bus) 984 { 985 struct pci_dev *pdev; 986 int err; 987 988 if (bus->bustype != SSB_BUSTYPE_PCI) 989 return 0; 990 991 pdev = bus->host_pci; 992 mutex_init(&bus->sprom_mutex); 993 err = device_create_file(&pdev->dev, &dev_attr_ssb_sprom); 994 if (err) 995 goto out; 996 997 out: 998 return err; 999 } 1000