1 /* 2 * Sonics Silicon Backplane 3 * Subsystem core 4 * 5 * Copyright 2005, Broadcom Corporation 6 * Copyright 2006, 2007, Michael Buesch <m@bues.ch> 7 * 8 * Licensed under the GNU/GPL. See COPYING for details. 9 */ 10 11 #include "ssb_private.h" 12 13 #include <linux/delay.h> 14 #include <linux/io.h> 15 #include <linux/module.h> 16 #include <linux/platform_device.h> 17 #include <linux/ssb/ssb.h> 18 #include <linux/ssb/ssb_regs.h> 19 #include <linux/ssb/ssb_driver_gige.h> 20 #include <linux/dma-mapping.h> 21 #include <linux/pci.h> 22 #include <linux/mmc/sdio_func.h> 23 #include <linux/slab.h> 24 25 #include <pcmcia/cistpl.h> 26 #include <pcmcia/ds.h> 27 28 29 MODULE_DESCRIPTION("Sonics Silicon Backplane driver"); 30 MODULE_LICENSE("GPL"); 31 32 33 /* Temporary list of yet-to-be-attached buses */ 34 static LIST_HEAD(attach_queue); 35 /* List if running buses */ 36 static LIST_HEAD(buses); 37 /* Software ID counter */ 38 static unsigned int next_busnumber; 39 /* buses_mutes locks the two buslists and the next_busnumber. 40 * Don't lock this directly, but use ssb_buses_[un]lock() below. */ 41 static DEFINE_MUTEX(buses_mutex); 42 43 /* There are differences in the codeflow, if the bus is 44 * initialized from early boot, as various needed services 45 * are not available early. This is a mechanism to delay 46 * these initializations to after early boot has finished. 47 * It's also used to avoid mutex locking, as that's not 48 * available and needed early. */ 49 static bool ssb_is_early_boot = 1; 50 51 static void ssb_buses_lock(void); 52 static void ssb_buses_unlock(void); 53 54 55 #ifdef CONFIG_SSB_PCIHOST 56 struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev) 57 { 58 struct ssb_bus *bus; 59 60 ssb_buses_lock(); 61 list_for_each_entry(bus, &buses, list) { 62 if (bus->bustype == SSB_BUSTYPE_PCI && 63 bus->host_pci == pdev) 64 goto found; 65 } 66 bus = NULL; 67 found: 68 ssb_buses_unlock(); 69 70 return bus; 71 } 72 #endif /* CONFIG_SSB_PCIHOST */ 73 74 #ifdef CONFIG_SSB_PCMCIAHOST 75 struct ssb_bus *ssb_pcmcia_dev_to_bus(struct pcmcia_device *pdev) 76 { 77 struct ssb_bus *bus; 78 79 ssb_buses_lock(); 80 list_for_each_entry(bus, &buses, list) { 81 if (bus->bustype == SSB_BUSTYPE_PCMCIA && 82 bus->host_pcmcia == pdev) 83 goto found; 84 } 85 bus = NULL; 86 found: 87 ssb_buses_unlock(); 88 89 return bus; 90 } 91 #endif /* CONFIG_SSB_PCMCIAHOST */ 92 93 #ifdef CONFIG_SSB_SDIOHOST 94 struct ssb_bus *ssb_sdio_func_to_bus(struct sdio_func *func) 95 { 96 struct ssb_bus *bus; 97 98 ssb_buses_lock(); 99 list_for_each_entry(bus, &buses, list) { 100 if (bus->bustype == SSB_BUSTYPE_SDIO && 101 bus->host_sdio == func) 102 goto found; 103 } 104 bus = NULL; 105 found: 106 ssb_buses_unlock(); 107 108 return bus; 109 } 110 #endif /* CONFIG_SSB_SDIOHOST */ 111 112 int ssb_for_each_bus_call(unsigned long data, 113 int (*func)(struct ssb_bus *bus, unsigned long data)) 114 { 115 struct ssb_bus *bus; 116 int res; 117 118 ssb_buses_lock(); 119 list_for_each_entry(bus, &buses, list) { 120 res = func(bus, data); 121 if (res >= 0) { 122 ssb_buses_unlock(); 123 return res; 124 } 125 } 126 ssb_buses_unlock(); 127 128 return -ENODEV; 129 } 130 131 static struct ssb_device *ssb_device_get(struct ssb_device *dev) 132 { 133 if (dev) 134 get_device(dev->dev); 135 return dev; 136 } 137 138 static void ssb_device_put(struct ssb_device *dev) 139 { 140 if (dev) 141 put_device(dev->dev); 142 } 143 144 static int ssb_device_resume(struct device *dev) 145 { 146 struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); 147 struct ssb_driver *ssb_drv; 148 int err = 0; 149 150 if (dev->driver) { 151 ssb_drv = drv_to_ssb_drv(dev->driver); 152 if (ssb_drv && ssb_drv->resume) 153 err = ssb_drv->resume(ssb_dev); 154 if (err) 155 goto out; 156 } 157 out: 158 return err; 159 } 160 161 static int ssb_device_suspend(struct device *dev, pm_message_t state) 162 { 163 struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); 164 struct ssb_driver *ssb_drv; 165 int err = 0; 166 167 if (dev->driver) { 168 ssb_drv = drv_to_ssb_drv(dev->driver); 169 if (ssb_drv && ssb_drv->suspend) 170 err = ssb_drv->suspend(ssb_dev, state); 171 if (err) 172 goto out; 173 } 174 out: 175 return err; 176 } 177 178 int ssb_bus_resume(struct ssb_bus *bus) 179 { 180 int err; 181 182 /* Reset HW state information in memory, so that HW is 183 * completely reinitialized. */ 184 bus->mapped_device = NULL; 185 #ifdef CONFIG_SSB_DRIVER_PCICORE 186 bus->pcicore.setup_done = 0; 187 #endif 188 189 err = ssb_bus_powerup(bus, 0); 190 if (err) 191 return err; 192 err = ssb_pcmcia_hardware_setup(bus); 193 if (err) { 194 ssb_bus_may_powerdown(bus); 195 return err; 196 } 197 ssb_chipco_resume(&bus->chipco); 198 ssb_bus_may_powerdown(bus); 199 200 return 0; 201 } 202 EXPORT_SYMBOL(ssb_bus_resume); 203 204 int ssb_bus_suspend(struct ssb_bus *bus) 205 { 206 ssb_chipco_suspend(&bus->chipco); 207 ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0); 208 209 return 0; 210 } 211 EXPORT_SYMBOL(ssb_bus_suspend); 212 213 #ifdef CONFIG_SSB_SPROM 214 /** ssb_devices_freeze - Freeze all devices on the bus. 215 * 216 * After freezing no device driver will be handling a device 217 * on this bus anymore. ssb_devices_thaw() must be called after 218 * a successful freeze to reactivate the devices. 219 * 220 * @bus: The bus. 221 * @ctx: Context structure. Pass this to ssb_devices_thaw(). 222 */ 223 int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx) 224 { 225 struct ssb_device *sdev; 226 struct ssb_driver *sdrv; 227 unsigned int i; 228 229 memset(ctx, 0, sizeof(*ctx)); 230 ctx->bus = bus; 231 SSB_WARN_ON(bus->nr_devices > ARRAY_SIZE(ctx->device_frozen)); 232 233 for (i = 0; i < bus->nr_devices; i++) { 234 sdev = ssb_device_get(&bus->devices[i]); 235 236 if (!sdev->dev || !sdev->dev->driver || 237 !device_is_registered(sdev->dev)) { 238 ssb_device_put(sdev); 239 continue; 240 } 241 sdrv = drv_to_ssb_drv(sdev->dev->driver); 242 if (SSB_WARN_ON(!sdrv->remove)) 243 continue; 244 sdrv->remove(sdev); 245 ctx->device_frozen[i] = 1; 246 } 247 248 return 0; 249 } 250 251 /** ssb_devices_thaw - Unfreeze all devices on the bus. 252 * 253 * This will re-attach the device drivers and re-init the devices. 254 * 255 * @ctx: The context structure from ssb_devices_freeze() 256 */ 257 int ssb_devices_thaw(struct ssb_freeze_context *ctx) 258 { 259 struct ssb_bus *bus = ctx->bus; 260 struct ssb_device *sdev; 261 struct ssb_driver *sdrv; 262 unsigned int i; 263 int err, result = 0; 264 265 for (i = 0; i < bus->nr_devices; i++) { 266 if (!ctx->device_frozen[i]) 267 continue; 268 sdev = &bus->devices[i]; 269 270 if (SSB_WARN_ON(!sdev->dev || !sdev->dev->driver)) 271 continue; 272 sdrv = drv_to_ssb_drv(sdev->dev->driver); 273 if (SSB_WARN_ON(!sdrv || !sdrv->probe)) 274 continue; 275 276 err = sdrv->probe(sdev, &sdev->id); 277 if (err) { 278 ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n", 279 dev_name(sdev->dev)); 280 result = err; 281 } 282 ssb_device_put(sdev); 283 } 284 285 return result; 286 } 287 #endif /* CONFIG_SSB_SPROM */ 288 289 static void ssb_device_shutdown(struct device *dev) 290 { 291 struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); 292 struct ssb_driver *ssb_drv; 293 294 if (!dev->driver) 295 return; 296 ssb_drv = drv_to_ssb_drv(dev->driver); 297 if (ssb_drv && ssb_drv->shutdown) 298 ssb_drv->shutdown(ssb_dev); 299 } 300 301 static int ssb_device_remove(struct device *dev) 302 { 303 struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); 304 struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver); 305 306 if (ssb_drv && ssb_drv->remove) 307 ssb_drv->remove(ssb_dev); 308 ssb_device_put(ssb_dev); 309 310 return 0; 311 } 312 313 static int ssb_device_probe(struct device *dev) 314 { 315 struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); 316 struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver); 317 int err = 0; 318 319 ssb_device_get(ssb_dev); 320 if (ssb_drv && ssb_drv->probe) 321 err = ssb_drv->probe(ssb_dev, &ssb_dev->id); 322 if (err) 323 ssb_device_put(ssb_dev); 324 325 return err; 326 } 327 328 static int ssb_match_devid(const struct ssb_device_id *tabid, 329 const struct ssb_device_id *devid) 330 { 331 if ((tabid->vendor != devid->vendor) && 332 tabid->vendor != SSB_ANY_VENDOR) 333 return 0; 334 if ((tabid->coreid != devid->coreid) && 335 tabid->coreid != SSB_ANY_ID) 336 return 0; 337 if ((tabid->revision != devid->revision) && 338 tabid->revision != SSB_ANY_REV) 339 return 0; 340 return 1; 341 } 342 343 static int ssb_bus_match(struct device *dev, struct device_driver *drv) 344 { 345 struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); 346 struct ssb_driver *ssb_drv = drv_to_ssb_drv(drv); 347 const struct ssb_device_id *id; 348 349 for (id = ssb_drv->id_table; 350 id->vendor || id->coreid || id->revision; 351 id++) { 352 if (ssb_match_devid(id, &ssb_dev->id)) 353 return 1; /* found */ 354 } 355 356 return 0; 357 } 358 359 static int ssb_device_uevent(struct device *dev, struct kobj_uevent_env *env) 360 { 361 struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); 362 363 if (!dev) 364 return -ENODEV; 365 366 return add_uevent_var(env, 367 "MODALIAS=ssb:v%04Xid%04Xrev%02X", 368 ssb_dev->id.vendor, ssb_dev->id.coreid, 369 ssb_dev->id.revision); 370 } 371 372 #define ssb_config_attr(attrib, field, format_string) \ 373 static ssize_t \ 374 attrib##_show(struct device *dev, struct device_attribute *attr, char *buf) \ 375 { \ 376 return sprintf(buf, format_string, dev_to_ssb_dev(dev)->field); \ 377 } 378 379 ssb_config_attr(core_num, core_index, "%u\n") 380 ssb_config_attr(coreid, id.coreid, "0x%04x\n") 381 ssb_config_attr(vendor, id.vendor, "0x%04x\n") 382 ssb_config_attr(revision, id.revision, "%u\n") 383 ssb_config_attr(irq, irq, "%u\n") 384 static ssize_t 385 name_show(struct device *dev, struct device_attribute *attr, char *buf) 386 { 387 return sprintf(buf, "%s\n", 388 ssb_core_name(dev_to_ssb_dev(dev)->id.coreid)); 389 } 390 391 static struct device_attribute ssb_device_attrs[] = { 392 __ATTR_RO(name), 393 __ATTR_RO(core_num), 394 __ATTR_RO(coreid), 395 __ATTR_RO(vendor), 396 __ATTR_RO(revision), 397 __ATTR_RO(irq), 398 __ATTR_NULL, 399 }; 400 401 static struct bus_type ssb_bustype = { 402 .name = "ssb", 403 .match = ssb_bus_match, 404 .probe = ssb_device_probe, 405 .remove = ssb_device_remove, 406 .shutdown = ssb_device_shutdown, 407 .suspend = ssb_device_suspend, 408 .resume = ssb_device_resume, 409 .uevent = ssb_device_uevent, 410 .dev_attrs = ssb_device_attrs, 411 }; 412 413 static void ssb_buses_lock(void) 414 { 415 /* See the comment at the ssb_is_early_boot definition */ 416 if (!ssb_is_early_boot) 417 mutex_lock(&buses_mutex); 418 } 419 420 static void ssb_buses_unlock(void) 421 { 422 /* See the comment at the ssb_is_early_boot definition */ 423 if (!ssb_is_early_boot) 424 mutex_unlock(&buses_mutex); 425 } 426 427 static void ssb_devices_unregister(struct ssb_bus *bus) 428 { 429 struct ssb_device *sdev; 430 int i; 431 432 for (i = bus->nr_devices - 1; i >= 0; i--) { 433 sdev = &(bus->devices[i]); 434 if (sdev->dev) 435 device_unregister(sdev->dev); 436 } 437 438 #ifdef CONFIG_SSB_EMBEDDED 439 if (bus->bustype == SSB_BUSTYPE_SSB) 440 platform_device_unregister(bus->watchdog); 441 #endif 442 } 443 444 void ssb_bus_unregister(struct ssb_bus *bus) 445 { 446 ssb_buses_lock(); 447 ssb_devices_unregister(bus); 448 list_del(&bus->list); 449 ssb_buses_unlock(); 450 451 ssb_pcmcia_exit(bus); 452 ssb_pci_exit(bus); 453 ssb_iounmap(bus); 454 } 455 EXPORT_SYMBOL(ssb_bus_unregister); 456 457 static void ssb_release_dev(struct device *dev) 458 { 459 struct __ssb_dev_wrapper *devwrap; 460 461 devwrap = container_of(dev, struct __ssb_dev_wrapper, dev); 462 kfree(devwrap); 463 } 464 465 static int ssb_devices_register(struct ssb_bus *bus) 466 { 467 struct ssb_device *sdev; 468 struct device *dev; 469 struct __ssb_dev_wrapper *devwrap; 470 int i, err = 0; 471 int dev_idx = 0; 472 473 for (i = 0; i < bus->nr_devices; i++) { 474 sdev = &(bus->devices[i]); 475 476 /* We don't register SSB-system devices to the kernel, 477 * as the drivers for them are built into SSB. */ 478 switch (sdev->id.coreid) { 479 case SSB_DEV_CHIPCOMMON: 480 case SSB_DEV_PCI: 481 case SSB_DEV_PCIE: 482 case SSB_DEV_PCMCIA: 483 case SSB_DEV_MIPS: 484 case SSB_DEV_MIPS_3302: 485 case SSB_DEV_EXTIF: 486 continue; 487 } 488 489 devwrap = kzalloc(sizeof(*devwrap), GFP_KERNEL); 490 if (!devwrap) { 491 ssb_printk(KERN_ERR PFX 492 "Could not allocate device\n"); 493 err = -ENOMEM; 494 goto error; 495 } 496 dev = &devwrap->dev; 497 devwrap->sdev = sdev; 498 499 dev->release = ssb_release_dev; 500 dev->bus = &ssb_bustype; 501 dev_set_name(dev, "ssb%u:%d", bus->busnumber, dev_idx); 502 503 switch (bus->bustype) { 504 case SSB_BUSTYPE_PCI: 505 #ifdef CONFIG_SSB_PCIHOST 506 sdev->irq = bus->host_pci->irq; 507 dev->parent = &bus->host_pci->dev; 508 sdev->dma_dev = dev->parent; 509 #endif 510 break; 511 case SSB_BUSTYPE_PCMCIA: 512 #ifdef CONFIG_SSB_PCMCIAHOST 513 sdev->irq = bus->host_pcmcia->irq; 514 dev->parent = &bus->host_pcmcia->dev; 515 #endif 516 break; 517 case SSB_BUSTYPE_SDIO: 518 #ifdef CONFIG_SSB_SDIOHOST 519 dev->parent = &bus->host_sdio->dev; 520 #endif 521 break; 522 case SSB_BUSTYPE_SSB: 523 dev->dma_mask = &dev->coherent_dma_mask; 524 sdev->dma_dev = dev; 525 break; 526 } 527 528 sdev->dev = dev; 529 err = device_register(dev); 530 if (err) { 531 ssb_printk(KERN_ERR PFX 532 "Could not register %s\n", 533 dev_name(dev)); 534 /* Set dev to NULL to not unregister 535 * dev on error unwinding. */ 536 sdev->dev = NULL; 537 kfree(devwrap); 538 goto error; 539 } 540 dev_idx++; 541 } 542 543 return 0; 544 error: 545 /* Unwind the already registered devices. */ 546 ssb_devices_unregister(bus); 547 return err; 548 } 549 550 /* Needs ssb_buses_lock() */ 551 static int __devinit ssb_attach_queued_buses(void) 552 { 553 struct ssb_bus *bus, *n; 554 int err = 0; 555 int drop_them_all = 0; 556 557 list_for_each_entry_safe(bus, n, &attach_queue, list) { 558 if (drop_them_all) { 559 list_del(&bus->list); 560 continue; 561 } 562 /* Can't init the PCIcore in ssb_bus_register(), as that 563 * is too early in boot for embedded systems 564 * (no udelay() available). So do it here in attach stage. 565 */ 566 err = ssb_bus_powerup(bus, 0); 567 if (err) 568 goto error; 569 ssb_pcicore_init(&bus->pcicore); 570 if (bus->bustype == SSB_BUSTYPE_SSB) 571 ssb_watchdog_register(bus); 572 ssb_bus_may_powerdown(bus); 573 574 err = ssb_devices_register(bus); 575 error: 576 if (err) { 577 drop_them_all = 1; 578 list_del(&bus->list); 579 continue; 580 } 581 list_move_tail(&bus->list, &buses); 582 } 583 584 return err; 585 } 586 587 static u8 ssb_ssb_read8(struct ssb_device *dev, u16 offset) 588 { 589 struct ssb_bus *bus = dev->bus; 590 591 offset += dev->core_index * SSB_CORE_SIZE; 592 return readb(bus->mmio + offset); 593 } 594 595 static u16 ssb_ssb_read16(struct ssb_device *dev, u16 offset) 596 { 597 struct ssb_bus *bus = dev->bus; 598 599 offset += dev->core_index * SSB_CORE_SIZE; 600 return readw(bus->mmio + offset); 601 } 602 603 static u32 ssb_ssb_read32(struct ssb_device *dev, u16 offset) 604 { 605 struct ssb_bus *bus = dev->bus; 606 607 offset += dev->core_index * SSB_CORE_SIZE; 608 return readl(bus->mmio + offset); 609 } 610 611 #ifdef CONFIG_SSB_BLOCKIO 612 static void ssb_ssb_block_read(struct ssb_device *dev, void *buffer, 613 size_t count, u16 offset, u8 reg_width) 614 { 615 struct ssb_bus *bus = dev->bus; 616 void __iomem *addr; 617 618 offset += dev->core_index * SSB_CORE_SIZE; 619 addr = bus->mmio + offset; 620 621 switch (reg_width) { 622 case sizeof(u8): { 623 u8 *buf = buffer; 624 625 while (count) { 626 *buf = __raw_readb(addr); 627 buf++; 628 count--; 629 } 630 break; 631 } 632 case sizeof(u16): { 633 __le16 *buf = buffer; 634 635 SSB_WARN_ON(count & 1); 636 while (count) { 637 *buf = (__force __le16)__raw_readw(addr); 638 buf++; 639 count -= 2; 640 } 641 break; 642 } 643 case sizeof(u32): { 644 __le32 *buf = buffer; 645 646 SSB_WARN_ON(count & 3); 647 while (count) { 648 *buf = (__force __le32)__raw_readl(addr); 649 buf++; 650 count -= 4; 651 } 652 break; 653 } 654 default: 655 SSB_WARN_ON(1); 656 } 657 } 658 #endif /* CONFIG_SSB_BLOCKIO */ 659 660 static void ssb_ssb_write8(struct ssb_device *dev, u16 offset, u8 value) 661 { 662 struct ssb_bus *bus = dev->bus; 663 664 offset += dev->core_index * SSB_CORE_SIZE; 665 writeb(value, bus->mmio + offset); 666 } 667 668 static void ssb_ssb_write16(struct ssb_device *dev, u16 offset, u16 value) 669 { 670 struct ssb_bus *bus = dev->bus; 671 672 offset += dev->core_index * SSB_CORE_SIZE; 673 writew(value, bus->mmio + offset); 674 } 675 676 static void ssb_ssb_write32(struct ssb_device *dev, u16 offset, u32 value) 677 { 678 struct ssb_bus *bus = dev->bus; 679 680 offset += dev->core_index * SSB_CORE_SIZE; 681 writel(value, bus->mmio + offset); 682 } 683 684 #ifdef CONFIG_SSB_BLOCKIO 685 static void ssb_ssb_block_write(struct ssb_device *dev, const void *buffer, 686 size_t count, u16 offset, u8 reg_width) 687 { 688 struct ssb_bus *bus = dev->bus; 689 void __iomem *addr; 690 691 offset += dev->core_index * SSB_CORE_SIZE; 692 addr = bus->mmio + offset; 693 694 switch (reg_width) { 695 case sizeof(u8): { 696 const u8 *buf = buffer; 697 698 while (count) { 699 __raw_writeb(*buf, addr); 700 buf++; 701 count--; 702 } 703 break; 704 } 705 case sizeof(u16): { 706 const __le16 *buf = buffer; 707 708 SSB_WARN_ON(count & 1); 709 while (count) { 710 __raw_writew((__force u16)(*buf), addr); 711 buf++; 712 count -= 2; 713 } 714 break; 715 } 716 case sizeof(u32): { 717 const __le32 *buf = buffer; 718 719 SSB_WARN_ON(count & 3); 720 while (count) { 721 __raw_writel((__force u32)(*buf), addr); 722 buf++; 723 count -= 4; 724 } 725 break; 726 } 727 default: 728 SSB_WARN_ON(1); 729 } 730 } 731 #endif /* CONFIG_SSB_BLOCKIO */ 732 733 /* Ops for the plain SSB bus without a host-device (no PCI or PCMCIA). */ 734 static const struct ssb_bus_ops ssb_ssb_ops = { 735 .read8 = ssb_ssb_read8, 736 .read16 = ssb_ssb_read16, 737 .read32 = ssb_ssb_read32, 738 .write8 = ssb_ssb_write8, 739 .write16 = ssb_ssb_write16, 740 .write32 = ssb_ssb_write32, 741 #ifdef CONFIG_SSB_BLOCKIO 742 .block_read = ssb_ssb_block_read, 743 .block_write = ssb_ssb_block_write, 744 #endif 745 }; 746 747 static int ssb_fetch_invariants(struct ssb_bus *bus, 748 ssb_invariants_func_t get_invariants) 749 { 750 struct ssb_init_invariants iv; 751 int err; 752 753 memset(&iv, 0, sizeof(iv)); 754 err = get_invariants(bus, &iv); 755 if (err) 756 goto out; 757 memcpy(&bus->boardinfo, &iv.boardinfo, sizeof(iv.boardinfo)); 758 memcpy(&bus->sprom, &iv.sprom, sizeof(iv.sprom)); 759 bus->has_cardbus_slot = iv.has_cardbus_slot; 760 out: 761 return err; 762 } 763 764 static int __devinit ssb_bus_register(struct ssb_bus *bus, 765 ssb_invariants_func_t get_invariants, 766 unsigned long baseaddr) 767 { 768 int err; 769 770 spin_lock_init(&bus->bar_lock); 771 INIT_LIST_HEAD(&bus->list); 772 #ifdef CONFIG_SSB_EMBEDDED 773 spin_lock_init(&bus->gpio_lock); 774 #endif 775 776 /* Powerup the bus */ 777 err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1); 778 if (err) 779 goto out; 780 781 /* Init SDIO-host device (if any), before the scan */ 782 err = ssb_sdio_init(bus); 783 if (err) 784 goto err_disable_xtal; 785 786 ssb_buses_lock(); 787 bus->busnumber = next_busnumber; 788 /* Scan for devices (cores) */ 789 err = ssb_bus_scan(bus, baseaddr); 790 if (err) 791 goto err_sdio_exit; 792 793 /* Init PCI-host device (if any) */ 794 err = ssb_pci_init(bus); 795 if (err) 796 goto err_unmap; 797 /* Init PCMCIA-host device (if any) */ 798 err = ssb_pcmcia_init(bus); 799 if (err) 800 goto err_pci_exit; 801 802 /* Initialize basic system devices (if available) */ 803 err = ssb_bus_powerup(bus, 0); 804 if (err) 805 goto err_pcmcia_exit; 806 ssb_chipcommon_init(&bus->chipco); 807 ssb_extif_init(&bus->extif); 808 ssb_mipscore_init(&bus->mipscore); 809 err = ssb_gpio_init(bus); 810 if (err == -ENOTSUPP) 811 ssb_dprintk(KERN_DEBUG PFX "GPIO driver not activated\n"); 812 else if (err) 813 ssb_dprintk(KERN_ERR PFX 814 "Error registering GPIO driver: %i\n", err); 815 err = ssb_fetch_invariants(bus, get_invariants); 816 if (err) { 817 ssb_bus_may_powerdown(bus); 818 goto err_pcmcia_exit; 819 } 820 ssb_bus_may_powerdown(bus); 821 822 /* Queue it for attach. 823 * See the comment at the ssb_is_early_boot definition. */ 824 list_add_tail(&bus->list, &attach_queue); 825 if (!ssb_is_early_boot) { 826 /* This is not early boot, so we must attach the bus now */ 827 err = ssb_attach_queued_buses(); 828 if (err) 829 goto err_dequeue; 830 } 831 next_busnumber++; 832 ssb_buses_unlock(); 833 834 out: 835 return err; 836 837 err_dequeue: 838 list_del(&bus->list); 839 err_pcmcia_exit: 840 ssb_pcmcia_exit(bus); 841 err_pci_exit: 842 ssb_pci_exit(bus); 843 err_unmap: 844 ssb_iounmap(bus); 845 err_sdio_exit: 846 ssb_sdio_exit(bus); 847 err_disable_xtal: 848 ssb_buses_unlock(); 849 ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0); 850 return err; 851 } 852 853 #ifdef CONFIG_SSB_PCIHOST 854 int __devinit ssb_bus_pcibus_register(struct ssb_bus *bus, 855 struct pci_dev *host_pci) 856 { 857 int err; 858 859 bus->bustype = SSB_BUSTYPE_PCI; 860 bus->host_pci = host_pci; 861 bus->ops = &ssb_pci_ops; 862 863 err = ssb_bus_register(bus, ssb_pci_get_invariants, 0); 864 if (!err) { 865 ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on " 866 "PCI device %s\n", dev_name(&host_pci->dev)); 867 } else { 868 ssb_printk(KERN_ERR PFX "Failed to register PCI version" 869 " of SSB with error %d\n", err); 870 } 871 872 return err; 873 } 874 EXPORT_SYMBOL(ssb_bus_pcibus_register); 875 #endif /* CONFIG_SSB_PCIHOST */ 876 877 #ifdef CONFIG_SSB_PCMCIAHOST 878 int __devinit ssb_bus_pcmciabus_register(struct ssb_bus *bus, 879 struct pcmcia_device *pcmcia_dev, 880 unsigned long baseaddr) 881 { 882 int err; 883 884 bus->bustype = SSB_BUSTYPE_PCMCIA; 885 bus->host_pcmcia = pcmcia_dev; 886 bus->ops = &ssb_pcmcia_ops; 887 888 err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr); 889 if (!err) { 890 ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on " 891 "PCMCIA device %s\n", pcmcia_dev->devname); 892 } 893 894 return err; 895 } 896 EXPORT_SYMBOL(ssb_bus_pcmciabus_register); 897 #endif /* CONFIG_SSB_PCMCIAHOST */ 898 899 #ifdef CONFIG_SSB_SDIOHOST 900 int __devinit ssb_bus_sdiobus_register(struct ssb_bus *bus, 901 struct sdio_func *func, 902 unsigned int quirks) 903 { 904 int err; 905 906 bus->bustype = SSB_BUSTYPE_SDIO; 907 bus->host_sdio = func; 908 bus->ops = &ssb_sdio_ops; 909 bus->quirks = quirks; 910 911 err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0); 912 if (!err) { 913 ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on " 914 "SDIO device %s\n", sdio_func_id(func)); 915 } 916 917 return err; 918 } 919 EXPORT_SYMBOL(ssb_bus_sdiobus_register); 920 #endif /* CONFIG_SSB_PCMCIAHOST */ 921 922 int __devinit ssb_bus_ssbbus_register(struct ssb_bus *bus, 923 unsigned long baseaddr, 924 ssb_invariants_func_t get_invariants) 925 { 926 int err; 927 928 bus->bustype = SSB_BUSTYPE_SSB; 929 bus->ops = &ssb_ssb_ops; 930 931 err = ssb_bus_register(bus, get_invariants, baseaddr); 932 if (!err) { 933 ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found at " 934 "address 0x%08lX\n", baseaddr); 935 } 936 937 return err; 938 } 939 940 int __ssb_driver_register(struct ssb_driver *drv, struct module *owner) 941 { 942 drv->drv.name = drv->name; 943 drv->drv.bus = &ssb_bustype; 944 drv->drv.owner = owner; 945 946 return driver_register(&drv->drv); 947 } 948 EXPORT_SYMBOL(__ssb_driver_register); 949 950 void ssb_driver_unregister(struct ssb_driver *drv) 951 { 952 driver_unregister(&drv->drv); 953 } 954 EXPORT_SYMBOL(ssb_driver_unregister); 955 956 void ssb_set_devtypedata(struct ssb_device *dev, void *data) 957 { 958 struct ssb_bus *bus = dev->bus; 959 struct ssb_device *ent; 960 int i; 961 962 for (i = 0; i < bus->nr_devices; i++) { 963 ent = &(bus->devices[i]); 964 if (ent->id.vendor != dev->id.vendor) 965 continue; 966 if (ent->id.coreid != dev->id.coreid) 967 continue; 968 969 ent->devtypedata = data; 970 } 971 } 972 EXPORT_SYMBOL(ssb_set_devtypedata); 973 974 static u32 clkfactor_f6_resolve(u32 v) 975 { 976 /* map the magic values */ 977 switch (v) { 978 case SSB_CHIPCO_CLK_F6_2: 979 return 2; 980 case SSB_CHIPCO_CLK_F6_3: 981 return 3; 982 case SSB_CHIPCO_CLK_F6_4: 983 return 4; 984 case SSB_CHIPCO_CLK_F6_5: 985 return 5; 986 case SSB_CHIPCO_CLK_F6_6: 987 return 6; 988 case SSB_CHIPCO_CLK_F6_7: 989 return 7; 990 } 991 return 0; 992 } 993 994 /* Calculate the speed the backplane would run at a given set of clockcontrol values */ 995 u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m) 996 { 997 u32 n1, n2, clock, m1, m2, m3, mc; 998 999 n1 = (n & SSB_CHIPCO_CLK_N1); 1000 n2 = ((n & SSB_CHIPCO_CLK_N2) >> SSB_CHIPCO_CLK_N2_SHIFT); 1001 1002 switch (plltype) { 1003 case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */ 1004 if (m & SSB_CHIPCO_CLK_T6_MMASK) 1005 return SSB_CHIPCO_CLK_T6_M1; 1006 return SSB_CHIPCO_CLK_T6_M0; 1007 case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */ 1008 case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ 1009 case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */ 1010 case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */ 1011 n1 = clkfactor_f6_resolve(n1); 1012 n2 += SSB_CHIPCO_CLK_F5_BIAS; 1013 break; 1014 case SSB_PLLTYPE_2: /* 48Mhz, 4 dividers */ 1015 n1 += SSB_CHIPCO_CLK_T2_BIAS; 1016 n2 += SSB_CHIPCO_CLK_T2_BIAS; 1017 SSB_WARN_ON(!((n1 >= 2) && (n1 <= 7))); 1018 SSB_WARN_ON(!((n2 >= 5) && (n2 <= 23))); 1019 break; 1020 case SSB_PLLTYPE_5: /* 25Mhz, 4 dividers */ 1021 return 100000000; 1022 default: 1023 SSB_WARN_ON(1); 1024 } 1025 1026 switch (plltype) { 1027 case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ 1028 case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */ 1029 clock = SSB_CHIPCO_CLK_BASE2 * n1 * n2; 1030 break; 1031 default: 1032 clock = SSB_CHIPCO_CLK_BASE1 * n1 * n2; 1033 } 1034 if (!clock) 1035 return 0; 1036 1037 m1 = (m & SSB_CHIPCO_CLK_M1); 1038 m2 = ((m & SSB_CHIPCO_CLK_M2) >> SSB_CHIPCO_CLK_M2_SHIFT); 1039 m3 = ((m & SSB_CHIPCO_CLK_M3) >> SSB_CHIPCO_CLK_M3_SHIFT); 1040 mc = ((m & SSB_CHIPCO_CLK_MC) >> SSB_CHIPCO_CLK_MC_SHIFT); 1041 1042 switch (plltype) { 1043 case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */ 1044 case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ 1045 case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */ 1046 case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */ 1047 m1 = clkfactor_f6_resolve(m1); 1048 if ((plltype == SSB_PLLTYPE_1) || 1049 (plltype == SSB_PLLTYPE_3)) 1050 m2 += SSB_CHIPCO_CLK_F5_BIAS; 1051 else 1052 m2 = clkfactor_f6_resolve(m2); 1053 m3 = clkfactor_f6_resolve(m3); 1054 1055 switch (mc) { 1056 case SSB_CHIPCO_CLK_MC_BYPASS: 1057 return clock; 1058 case SSB_CHIPCO_CLK_MC_M1: 1059 return (clock / m1); 1060 case SSB_CHIPCO_CLK_MC_M1M2: 1061 return (clock / (m1 * m2)); 1062 case SSB_CHIPCO_CLK_MC_M1M2M3: 1063 return (clock / (m1 * m2 * m3)); 1064 case SSB_CHIPCO_CLK_MC_M1M3: 1065 return (clock / (m1 * m3)); 1066 } 1067 return 0; 1068 case SSB_PLLTYPE_2: 1069 m1 += SSB_CHIPCO_CLK_T2_BIAS; 1070 m2 += SSB_CHIPCO_CLK_T2M2_BIAS; 1071 m3 += SSB_CHIPCO_CLK_T2_BIAS; 1072 SSB_WARN_ON(!((m1 >= 2) && (m1 <= 7))); 1073 SSB_WARN_ON(!((m2 >= 3) && (m2 <= 10))); 1074 SSB_WARN_ON(!((m3 >= 2) && (m3 <= 7))); 1075 1076 if (!(mc & SSB_CHIPCO_CLK_T2MC_M1BYP)) 1077 clock /= m1; 1078 if (!(mc & SSB_CHIPCO_CLK_T2MC_M2BYP)) 1079 clock /= m2; 1080 if (!(mc & SSB_CHIPCO_CLK_T2MC_M3BYP)) 1081 clock /= m3; 1082 return clock; 1083 default: 1084 SSB_WARN_ON(1); 1085 } 1086 return 0; 1087 } 1088 1089 /* Get the current speed the backplane is running at */ 1090 u32 ssb_clockspeed(struct ssb_bus *bus) 1091 { 1092 u32 rate; 1093 u32 plltype; 1094 u32 clkctl_n, clkctl_m; 1095 1096 if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) 1097 return ssb_pmu_get_controlclock(&bus->chipco); 1098 1099 if (ssb_extif_available(&bus->extif)) 1100 ssb_extif_get_clockcontrol(&bus->extif, &plltype, 1101 &clkctl_n, &clkctl_m); 1102 else if (bus->chipco.dev) 1103 ssb_chipco_get_clockcontrol(&bus->chipco, &plltype, 1104 &clkctl_n, &clkctl_m); 1105 else 1106 return 0; 1107 1108 if (bus->chip_id == 0x5365) { 1109 rate = 100000000; 1110 } else { 1111 rate = ssb_calc_clock_rate(plltype, clkctl_n, clkctl_m); 1112 if (plltype == SSB_PLLTYPE_3) /* 25Mhz, 2 dividers */ 1113 rate /= 2; 1114 } 1115 1116 return rate; 1117 } 1118 EXPORT_SYMBOL(ssb_clockspeed); 1119 1120 static u32 ssb_tmslow_reject_bitmask(struct ssb_device *dev) 1121 { 1122 u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV; 1123 1124 /* The REJECT bit seems to be different for Backplane rev 2.3 */ 1125 switch (rev) { 1126 case SSB_IDLOW_SSBREV_22: 1127 case SSB_IDLOW_SSBREV_24: 1128 case SSB_IDLOW_SSBREV_26: 1129 return SSB_TMSLOW_REJECT; 1130 case SSB_IDLOW_SSBREV_23: 1131 return SSB_TMSLOW_REJECT_23; 1132 case SSB_IDLOW_SSBREV_25: /* TODO - find the proper REJECT bit */ 1133 case SSB_IDLOW_SSBREV_27: /* same here */ 1134 return SSB_TMSLOW_REJECT; /* this is a guess */ 1135 default: 1136 WARN(1, KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev); 1137 } 1138 return (SSB_TMSLOW_REJECT | SSB_TMSLOW_REJECT_23); 1139 } 1140 1141 int ssb_device_is_enabled(struct ssb_device *dev) 1142 { 1143 u32 val; 1144 u32 reject; 1145 1146 reject = ssb_tmslow_reject_bitmask(dev); 1147 val = ssb_read32(dev, SSB_TMSLOW); 1148 val &= SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET | reject; 1149 1150 return (val == SSB_TMSLOW_CLOCK); 1151 } 1152 EXPORT_SYMBOL(ssb_device_is_enabled); 1153 1154 static void ssb_flush_tmslow(struct ssb_device *dev) 1155 { 1156 /* Make _really_ sure the device has finished the TMSLOW 1157 * register write transaction, as we risk running into 1158 * a machine check exception otherwise. 1159 * Do this by reading the register back to commit the 1160 * PCI write and delay an additional usec for the device 1161 * to react to the change. */ 1162 ssb_read32(dev, SSB_TMSLOW); 1163 udelay(1); 1164 } 1165 1166 void ssb_device_enable(struct ssb_device *dev, u32 core_specific_flags) 1167 { 1168 u32 val; 1169 1170 ssb_device_disable(dev, core_specific_flags); 1171 ssb_write32(dev, SSB_TMSLOW, 1172 SSB_TMSLOW_RESET | SSB_TMSLOW_CLOCK | 1173 SSB_TMSLOW_FGC | core_specific_flags); 1174 ssb_flush_tmslow(dev); 1175 1176 /* Clear SERR if set. This is a hw bug workaround. */ 1177 if (ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_SERR) 1178 ssb_write32(dev, SSB_TMSHIGH, 0); 1179 1180 val = ssb_read32(dev, SSB_IMSTATE); 1181 if (val & (SSB_IMSTATE_IBE | SSB_IMSTATE_TO)) { 1182 val &= ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO); 1183 ssb_write32(dev, SSB_IMSTATE, val); 1184 } 1185 1186 ssb_write32(dev, SSB_TMSLOW, 1187 SSB_TMSLOW_CLOCK | SSB_TMSLOW_FGC | 1188 core_specific_flags); 1189 ssb_flush_tmslow(dev); 1190 1191 ssb_write32(dev, SSB_TMSLOW, SSB_TMSLOW_CLOCK | 1192 core_specific_flags); 1193 ssb_flush_tmslow(dev); 1194 } 1195 EXPORT_SYMBOL(ssb_device_enable); 1196 1197 /* Wait for bitmask in a register to get set or cleared. 1198 * timeout is in units of ten-microseconds */ 1199 static int ssb_wait_bits(struct ssb_device *dev, u16 reg, u32 bitmask, 1200 int timeout, int set) 1201 { 1202 int i; 1203 u32 val; 1204 1205 for (i = 0; i < timeout; i++) { 1206 val = ssb_read32(dev, reg); 1207 if (set) { 1208 if ((val & bitmask) == bitmask) 1209 return 0; 1210 } else { 1211 if (!(val & bitmask)) 1212 return 0; 1213 } 1214 udelay(10); 1215 } 1216 printk(KERN_ERR PFX "Timeout waiting for bitmask %08X on " 1217 "register %04X to %s.\n", 1218 bitmask, reg, (set ? "set" : "clear")); 1219 1220 return -ETIMEDOUT; 1221 } 1222 1223 void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags) 1224 { 1225 u32 reject, val; 1226 1227 if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_RESET) 1228 return; 1229 1230 reject = ssb_tmslow_reject_bitmask(dev); 1231 1232 if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_CLOCK) { 1233 ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK); 1234 ssb_wait_bits(dev, SSB_TMSLOW, reject, 1000, 1); 1235 ssb_wait_bits(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0); 1236 1237 if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) { 1238 val = ssb_read32(dev, SSB_IMSTATE); 1239 val |= SSB_IMSTATE_REJECT; 1240 ssb_write32(dev, SSB_IMSTATE, val); 1241 ssb_wait_bits(dev, SSB_IMSTATE, SSB_IMSTATE_BUSY, 1000, 1242 0); 1243 } 1244 1245 ssb_write32(dev, SSB_TMSLOW, 1246 SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | 1247 reject | SSB_TMSLOW_RESET | 1248 core_specific_flags); 1249 ssb_flush_tmslow(dev); 1250 1251 if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) { 1252 val = ssb_read32(dev, SSB_IMSTATE); 1253 val &= ~SSB_IMSTATE_REJECT; 1254 ssb_write32(dev, SSB_IMSTATE, val); 1255 } 1256 } 1257 1258 ssb_write32(dev, SSB_TMSLOW, 1259 reject | SSB_TMSLOW_RESET | 1260 core_specific_flags); 1261 ssb_flush_tmslow(dev); 1262 } 1263 EXPORT_SYMBOL(ssb_device_disable); 1264 1265 /* Some chipsets need routing known for PCIe and 64-bit DMA */ 1266 static bool ssb_dma_translation_special_bit(struct ssb_device *dev) 1267 { 1268 u16 chip_id = dev->bus->chip_id; 1269 1270 if (dev->id.coreid == SSB_DEV_80211) { 1271 return (chip_id == 0x4322 || chip_id == 43221 || 1272 chip_id == 43231 || chip_id == 43222); 1273 } 1274 1275 return 0; 1276 } 1277 1278 u32 ssb_dma_translation(struct ssb_device *dev) 1279 { 1280 switch (dev->bus->bustype) { 1281 case SSB_BUSTYPE_SSB: 1282 return 0; 1283 case SSB_BUSTYPE_PCI: 1284 if (pci_is_pcie(dev->bus->host_pci) && 1285 ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64) { 1286 return SSB_PCIE_DMA_H32; 1287 } else { 1288 if (ssb_dma_translation_special_bit(dev)) 1289 return SSB_PCIE_DMA_H32; 1290 else 1291 return SSB_PCI_DMA; 1292 } 1293 default: 1294 __ssb_dma_not_implemented(dev); 1295 } 1296 return 0; 1297 } 1298 EXPORT_SYMBOL(ssb_dma_translation); 1299 1300 int ssb_bus_may_powerdown(struct ssb_bus *bus) 1301 { 1302 struct ssb_chipcommon *cc; 1303 int err = 0; 1304 1305 /* On buses where more than one core may be working 1306 * at a time, we must not powerdown stuff if there are 1307 * still cores that may want to run. */ 1308 if (bus->bustype == SSB_BUSTYPE_SSB) 1309 goto out; 1310 1311 cc = &bus->chipco; 1312 1313 if (!cc->dev) 1314 goto out; 1315 if (cc->dev->id.revision < 5) 1316 goto out; 1317 1318 ssb_chipco_set_clockmode(cc, SSB_CLKMODE_SLOW); 1319 err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0); 1320 if (err) 1321 goto error; 1322 out: 1323 #ifdef CONFIG_SSB_DEBUG 1324 bus->powered_up = 0; 1325 #endif 1326 return err; 1327 error: 1328 ssb_printk(KERN_ERR PFX "Bus powerdown failed\n"); 1329 goto out; 1330 } 1331 EXPORT_SYMBOL(ssb_bus_may_powerdown); 1332 1333 int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl) 1334 { 1335 int err; 1336 enum ssb_clkmode mode; 1337 1338 err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1); 1339 if (err) 1340 goto error; 1341 1342 #ifdef CONFIG_SSB_DEBUG 1343 bus->powered_up = 1; 1344 #endif 1345 1346 mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST; 1347 ssb_chipco_set_clockmode(&bus->chipco, mode); 1348 1349 return 0; 1350 error: 1351 ssb_printk(KERN_ERR PFX "Bus powerup failed\n"); 1352 return err; 1353 } 1354 EXPORT_SYMBOL(ssb_bus_powerup); 1355 1356 static void ssb_broadcast_value(struct ssb_device *dev, 1357 u32 address, u32 data) 1358 { 1359 #ifdef CONFIG_SSB_DRIVER_PCICORE 1360 /* This is used for both, PCI and ChipCommon core, so be careful. */ 1361 BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR); 1362 BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA); 1363 #endif 1364 1365 ssb_write32(dev, SSB_CHIPCO_BCAST_ADDR, address); 1366 ssb_read32(dev, SSB_CHIPCO_BCAST_ADDR); /* flush */ 1367 ssb_write32(dev, SSB_CHIPCO_BCAST_DATA, data); 1368 ssb_read32(dev, SSB_CHIPCO_BCAST_DATA); /* flush */ 1369 } 1370 1371 void ssb_commit_settings(struct ssb_bus *bus) 1372 { 1373 struct ssb_device *dev; 1374 1375 #ifdef CONFIG_SSB_DRIVER_PCICORE 1376 dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev; 1377 #else 1378 dev = bus->chipco.dev; 1379 #endif 1380 if (WARN_ON(!dev)) 1381 return; 1382 /* This forces an update of the cached registers. */ 1383 ssb_broadcast_value(dev, 0xFD8, 0); 1384 } 1385 EXPORT_SYMBOL(ssb_commit_settings); 1386 1387 u32 ssb_admatch_base(u32 adm) 1388 { 1389 u32 base = 0; 1390 1391 switch (adm & SSB_ADM_TYPE) { 1392 case SSB_ADM_TYPE0: 1393 base = (adm & SSB_ADM_BASE0); 1394 break; 1395 case SSB_ADM_TYPE1: 1396 SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */ 1397 base = (adm & SSB_ADM_BASE1); 1398 break; 1399 case SSB_ADM_TYPE2: 1400 SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */ 1401 base = (adm & SSB_ADM_BASE2); 1402 break; 1403 default: 1404 SSB_WARN_ON(1); 1405 } 1406 1407 return base; 1408 } 1409 EXPORT_SYMBOL(ssb_admatch_base); 1410 1411 u32 ssb_admatch_size(u32 adm) 1412 { 1413 u32 size = 0; 1414 1415 switch (adm & SSB_ADM_TYPE) { 1416 case SSB_ADM_TYPE0: 1417 size = ((adm & SSB_ADM_SZ0) >> SSB_ADM_SZ0_SHIFT); 1418 break; 1419 case SSB_ADM_TYPE1: 1420 SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */ 1421 size = ((adm & SSB_ADM_SZ1) >> SSB_ADM_SZ1_SHIFT); 1422 break; 1423 case SSB_ADM_TYPE2: 1424 SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */ 1425 size = ((adm & SSB_ADM_SZ2) >> SSB_ADM_SZ2_SHIFT); 1426 break; 1427 default: 1428 SSB_WARN_ON(1); 1429 } 1430 size = (1 << (size + 1)); 1431 1432 return size; 1433 } 1434 EXPORT_SYMBOL(ssb_admatch_size); 1435 1436 static int __init ssb_modinit(void) 1437 { 1438 int err; 1439 1440 /* See the comment at the ssb_is_early_boot definition */ 1441 ssb_is_early_boot = 0; 1442 err = bus_register(&ssb_bustype); 1443 if (err) 1444 return err; 1445 1446 /* Maybe we already registered some buses at early boot. 1447 * Check for this and attach them 1448 */ 1449 ssb_buses_lock(); 1450 err = ssb_attach_queued_buses(); 1451 ssb_buses_unlock(); 1452 if (err) { 1453 bus_unregister(&ssb_bustype); 1454 goto out; 1455 } 1456 1457 err = b43_pci_ssb_bridge_init(); 1458 if (err) { 1459 ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge " 1460 "initialization failed\n"); 1461 /* don't fail SSB init because of this */ 1462 err = 0; 1463 } 1464 err = ssb_gige_init(); 1465 if (err) { 1466 ssb_printk(KERN_ERR "SSB Broadcom Gigabit Ethernet " 1467 "driver initialization failed\n"); 1468 /* don't fail SSB init because of this */ 1469 err = 0; 1470 } 1471 out: 1472 return err; 1473 } 1474 /* ssb must be initialized after PCI but before the ssb drivers. 1475 * That means we must use some initcall between subsys_initcall 1476 * and device_initcall. */ 1477 fs_initcall(ssb_modinit); 1478 1479 static void __exit ssb_modexit(void) 1480 { 1481 ssb_gige_exit(); 1482 b43_pci_ssb_bridge_exit(); 1483 bus_unregister(&ssb_bustype); 1484 } 1485 module_exit(ssb_modexit) 1486