1 /* 2 * Sonics Silicon Backplane 3 * Broadcom ChipCommon core driver 4 * 5 * Copyright 2005, Broadcom Corporation 6 * Copyright 2006, 2007, Michael Buesch <m@bues.ch> 7 * Copyright 2012, Hauke Mehrtens <hauke@hauke-m.de> 8 * 9 * Licensed under the GNU/GPL. See COPYING for details. 10 */ 11 12 #include "ssb_private.h" 13 14 #include <linux/ssb/ssb.h> 15 #include <linux/ssb/ssb_regs.h> 16 #include <linux/export.h> 17 #include <linux/pci.h> 18 #include <linux/bcm47xx_wdt.h> 19 20 21 /* Clock sources */ 22 enum ssb_clksrc { 23 /* PCI clock */ 24 SSB_CHIPCO_CLKSRC_PCI, 25 /* Crystal slow clock oscillator */ 26 SSB_CHIPCO_CLKSRC_XTALOS, 27 /* Low power oscillator */ 28 SSB_CHIPCO_CLKSRC_LOPWROS, 29 }; 30 31 32 static inline u32 chipco_write32_masked(struct ssb_chipcommon *cc, u16 offset, 33 u32 mask, u32 value) 34 { 35 value &= mask; 36 value |= chipco_read32(cc, offset) & ~mask; 37 chipco_write32(cc, offset, value); 38 39 return value; 40 } 41 42 void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc, 43 enum ssb_clkmode mode) 44 { 45 struct ssb_device *ccdev = cc->dev; 46 struct ssb_bus *bus; 47 u32 tmp; 48 49 if (!ccdev) 50 return; 51 bus = ccdev->bus; 52 53 /* We support SLOW only on 6..9 */ 54 if (ccdev->id.revision >= 10 && mode == SSB_CLKMODE_SLOW) 55 mode = SSB_CLKMODE_DYNAMIC; 56 57 if (cc->capabilities & SSB_CHIPCO_CAP_PMU) 58 return; /* PMU controls clockmode, separated function needed */ 59 WARN_ON(ccdev->id.revision >= 20); 60 61 /* chipcommon cores prior to rev6 don't support dynamic clock control */ 62 if (ccdev->id.revision < 6) 63 return; 64 65 /* ChipCommon cores rev10+ need testing */ 66 if (ccdev->id.revision >= 10) 67 return; 68 69 if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL)) 70 return; 71 72 switch (mode) { 73 case SSB_CLKMODE_SLOW: /* For revs 6..9 only */ 74 tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL); 75 tmp |= SSB_CHIPCO_SLOWCLKCTL_FSLOW; 76 chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp); 77 break; 78 case SSB_CLKMODE_FAST: 79 if (ccdev->id.revision < 10) { 80 ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */ 81 tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL); 82 tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW; 83 tmp |= SSB_CHIPCO_SLOWCLKCTL_IPLL; 84 chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp); 85 } else { 86 chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL, 87 (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) | 88 SSB_CHIPCO_SYSCLKCTL_FORCEHT)); 89 /* udelay(150); TODO: not available in early init */ 90 } 91 break; 92 case SSB_CLKMODE_DYNAMIC: 93 if (ccdev->id.revision < 10) { 94 tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL); 95 tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW; 96 tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL; 97 tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL; 98 if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) != 99 SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL) 100 tmp |= SSB_CHIPCO_SLOWCLKCTL_ENXTAL; 101 chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp); 102 103 /* For dynamic control, we have to release our xtal_pu 104 * "force on" */ 105 if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL) 106 ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0); 107 } else { 108 chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL, 109 (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) & 110 ~SSB_CHIPCO_SYSCLKCTL_FORCEHT)); 111 } 112 break; 113 default: 114 WARN_ON(1); 115 } 116 } 117 118 /* Get the Slow Clock Source */ 119 static enum ssb_clksrc chipco_pctl_get_slowclksrc(struct ssb_chipcommon *cc) 120 { 121 struct ssb_bus *bus = cc->dev->bus; 122 u32 tmp; 123 124 if (cc->dev->id.revision < 6) { 125 if (bus->bustype == SSB_BUSTYPE_SSB || 126 bus->bustype == SSB_BUSTYPE_PCMCIA) 127 return SSB_CHIPCO_CLKSRC_XTALOS; 128 if (bus->bustype == SSB_BUSTYPE_PCI) { 129 pci_read_config_dword(bus->host_pci, SSB_GPIO_OUT, &tmp); 130 if (tmp & 0x10) 131 return SSB_CHIPCO_CLKSRC_PCI; 132 return SSB_CHIPCO_CLKSRC_XTALOS; 133 } 134 } 135 if (cc->dev->id.revision < 10) { 136 tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL); 137 tmp &= 0x7; 138 if (tmp == 0) 139 return SSB_CHIPCO_CLKSRC_LOPWROS; 140 if (tmp == 1) 141 return SSB_CHIPCO_CLKSRC_XTALOS; 142 if (tmp == 2) 143 return SSB_CHIPCO_CLKSRC_PCI; 144 } 145 146 return SSB_CHIPCO_CLKSRC_XTALOS; 147 } 148 149 /* Get maximum or minimum (depending on get_max flag) slowclock frequency. */ 150 static int chipco_pctl_clockfreqlimit(struct ssb_chipcommon *cc, int get_max) 151 { 152 int limit; 153 enum ssb_clksrc clocksrc; 154 int divisor = 1; 155 u32 tmp; 156 157 clocksrc = chipco_pctl_get_slowclksrc(cc); 158 if (cc->dev->id.revision < 6) { 159 switch (clocksrc) { 160 case SSB_CHIPCO_CLKSRC_PCI: 161 divisor = 64; 162 break; 163 case SSB_CHIPCO_CLKSRC_XTALOS: 164 divisor = 32; 165 break; 166 default: 167 WARN_ON(1); 168 } 169 } else if (cc->dev->id.revision < 10) { 170 switch (clocksrc) { 171 case SSB_CHIPCO_CLKSRC_LOPWROS: 172 break; 173 case SSB_CHIPCO_CLKSRC_XTALOS: 174 case SSB_CHIPCO_CLKSRC_PCI: 175 tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL); 176 divisor = (tmp >> 16) + 1; 177 divisor *= 4; 178 break; 179 } 180 } else { 181 tmp = chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL); 182 divisor = (tmp >> 16) + 1; 183 divisor *= 4; 184 } 185 186 switch (clocksrc) { 187 case SSB_CHIPCO_CLKSRC_LOPWROS: 188 if (get_max) 189 limit = 43000; 190 else 191 limit = 25000; 192 break; 193 case SSB_CHIPCO_CLKSRC_XTALOS: 194 if (get_max) 195 limit = 20200000; 196 else 197 limit = 19800000; 198 break; 199 case SSB_CHIPCO_CLKSRC_PCI: 200 if (get_max) 201 limit = 34000000; 202 else 203 limit = 25000000; 204 break; 205 } 206 limit /= divisor; 207 208 return limit; 209 } 210 211 static void chipco_powercontrol_init(struct ssb_chipcommon *cc) 212 { 213 struct ssb_bus *bus = cc->dev->bus; 214 215 if (bus->chip_id == 0x4321) { 216 if (bus->chip_rev == 0) 217 chipco_write32(cc, SSB_CHIPCO_CHIPCTL, 0x3A4); 218 else if (bus->chip_rev == 1) 219 chipco_write32(cc, SSB_CHIPCO_CHIPCTL, 0xA4); 220 } 221 222 if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL)) 223 return; 224 225 if (cc->dev->id.revision >= 10) { 226 /* Set Idle Power clock rate to 1Mhz */ 227 chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL, 228 (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) & 229 0x0000FFFF) | 0x00040000); 230 } else { 231 int maxfreq; 232 233 maxfreq = chipco_pctl_clockfreqlimit(cc, 1); 234 chipco_write32(cc, SSB_CHIPCO_PLLONDELAY, 235 (maxfreq * 150 + 999999) / 1000000); 236 chipco_write32(cc, SSB_CHIPCO_FREFSELDELAY, 237 (maxfreq * 15 + 999999) / 1000000); 238 } 239 } 240 241 /* https://bcm-v4.sipsolutions.net/802.11/PmuFastPwrupDelay */ 242 static u16 pmu_fast_powerup_delay(struct ssb_chipcommon *cc) 243 { 244 struct ssb_bus *bus = cc->dev->bus; 245 246 switch (bus->chip_id) { 247 case 0x4312: 248 case 0x4322: 249 case 0x4328: 250 return 7000; 251 case 0x4325: 252 /* TODO: */ 253 default: 254 return 15000; 255 } 256 } 257 258 /* https://bcm-v4.sipsolutions.net/802.11/ClkctlFastPwrupDelay */ 259 static void calc_fast_powerup_delay(struct ssb_chipcommon *cc) 260 { 261 struct ssb_bus *bus = cc->dev->bus; 262 int minfreq; 263 unsigned int tmp; 264 u32 pll_on_delay; 265 266 if (bus->bustype != SSB_BUSTYPE_PCI) 267 return; 268 269 if (cc->capabilities & SSB_CHIPCO_CAP_PMU) { 270 cc->fast_pwrup_delay = pmu_fast_powerup_delay(cc); 271 return; 272 } 273 274 if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL)) 275 return; 276 277 minfreq = chipco_pctl_clockfreqlimit(cc, 0); 278 pll_on_delay = chipco_read32(cc, SSB_CHIPCO_PLLONDELAY); 279 tmp = (((pll_on_delay + 2) * 1000000) + (minfreq - 1)) / minfreq; 280 WARN_ON(tmp & ~0xFFFF); 281 282 cc->fast_pwrup_delay = tmp; 283 } 284 285 static u32 ssb_chipco_alp_clock(struct ssb_chipcommon *cc) 286 { 287 if (cc->capabilities & SSB_CHIPCO_CAP_PMU) 288 return ssb_pmu_get_alp_clock(cc); 289 290 return 20000000; 291 } 292 293 static u32 ssb_chipco_watchdog_get_max_timer(struct ssb_chipcommon *cc) 294 { 295 u32 nb; 296 297 if (cc->capabilities & SSB_CHIPCO_CAP_PMU) { 298 if (cc->dev->id.revision < 26) 299 nb = 16; 300 else 301 nb = (cc->dev->id.revision >= 37) ? 32 : 24; 302 } else { 303 nb = 28; 304 } 305 if (nb == 32) 306 return 0xffffffff; 307 else 308 return (1 << nb) - 1; 309 } 310 311 u32 ssb_chipco_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks) 312 { 313 struct ssb_chipcommon *cc = bcm47xx_wdt_get_drvdata(wdt); 314 315 if (cc->dev->bus->bustype != SSB_BUSTYPE_SSB) 316 return 0; 317 318 return ssb_chipco_watchdog_timer_set(cc, ticks); 319 } 320 321 u32 ssb_chipco_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms) 322 { 323 struct ssb_chipcommon *cc = bcm47xx_wdt_get_drvdata(wdt); 324 u32 ticks; 325 326 if (cc->dev->bus->bustype != SSB_BUSTYPE_SSB) 327 return 0; 328 329 ticks = ssb_chipco_watchdog_timer_set(cc, cc->ticks_per_ms * ms); 330 return ticks / cc->ticks_per_ms; 331 } 332 333 static int ssb_chipco_watchdog_ticks_per_ms(struct ssb_chipcommon *cc) 334 { 335 struct ssb_bus *bus = cc->dev->bus; 336 337 if (cc->capabilities & SSB_CHIPCO_CAP_PMU) { 338 /* based on 32KHz ILP clock */ 339 return 32; 340 } else { 341 if (cc->dev->id.revision < 18) 342 return ssb_clockspeed(bus) / 1000; 343 else 344 return ssb_chipco_alp_clock(cc) / 1000; 345 } 346 } 347 348 void ssb_chipcommon_init(struct ssb_chipcommon *cc) 349 { 350 if (!cc->dev) 351 return; /* We don't have a ChipCommon */ 352 353 spin_lock_init(&cc->gpio_lock); 354 355 if (cc->dev->id.revision >= 11) 356 cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT); 357 dev_dbg(cc->dev->dev, "chipcommon status is 0x%x\n", cc->status); 358 359 if (cc->dev->id.revision >= 20) { 360 chipco_write32(cc, SSB_CHIPCO_GPIOPULLUP, 0); 361 chipco_write32(cc, SSB_CHIPCO_GPIOPULLDOWN, 0); 362 } 363 364 ssb_pmu_init(cc); 365 chipco_powercontrol_init(cc); 366 ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST); 367 calc_fast_powerup_delay(cc); 368 369 if (cc->dev->bus->bustype == SSB_BUSTYPE_SSB) { 370 cc->ticks_per_ms = ssb_chipco_watchdog_ticks_per_ms(cc); 371 cc->max_timer_ms = ssb_chipco_watchdog_get_max_timer(cc) / cc->ticks_per_ms; 372 } 373 } 374 375 void ssb_chipco_suspend(struct ssb_chipcommon *cc) 376 { 377 if (!cc->dev) 378 return; 379 ssb_chipco_set_clockmode(cc, SSB_CLKMODE_SLOW); 380 } 381 382 void ssb_chipco_resume(struct ssb_chipcommon *cc) 383 { 384 if (!cc->dev) 385 return; 386 chipco_powercontrol_init(cc); 387 ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST); 388 } 389 390 /* Get the processor clock */ 391 void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc, 392 u32 *plltype, u32 *n, u32 *m) 393 { 394 *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N); 395 *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT); 396 switch (*plltype) { 397 case SSB_PLLTYPE_2: 398 case SSB_PLLTYPE_4: 399 case SSB_PLLTYPE_6: 400 case SSB_PLLTYPE_7: 401 *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_MIPS); 402 break; 403 case SSB_PLLTYPE_3: 404 /* 5350 uses m2 to control mips */ 405 *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_M2); 406 break; 407 default: 408 *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_SB); 409 break; 410 } 411 } 412 413 /* Get the bus clock */ 414 void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc, 415 u32 *plltype, u32 *n, u32 *m) 416 { 417 *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N); 418 *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT); 419 switch (*plltype) { 420 case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */ 421 *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_MIPS); 422 break; 423 case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ 424 if (cc->dev->bus->chip_id != 0x5365) { 425 *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_M2); 426 break; 427 } 428 /* Fall through */ 429 default: 430 *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_SB); 431 } 432 } 433 434 void ssb_chipco_timing_init(struct ssb_chipcommon *cc, 435 unsigned long ns) 436 { 437 struct ssb_device *dev = cc->dev; 438 struct ssb_bus *bus = dev->bus; 439 u32 tmp; 440 441 /* set register for external IO to control LED. */ 442 chipco_write32(cc, SSB_CHIPCO_PROG_CFG, 0x11); 443 tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT; /* Waitcount-3 = 10ns */ 444 tmp |= DIV_ROUND_UP(40, ns) << SSB_PROG_WCNT_1_SHIFT; /* Waitcount-1 = 40ns */ 445 tmp |= DIV_ROUND_UP(240, ns); /* Waitcount-0 = 240ns */ 446 chipco_write32(cc, SSB_CHIPCO_PROG_WAITCNT, tmp); /* 0x01020a0c for a 100Mhz clock */ 447 448 /* Set timing for the flash */ 449 tmp = DIV_ROUND_UP(10, ns) << SSB_FLASH_WCNT_3_SHIFT; /* Waitcount-3 = 10nS */ 450 tmp |= DIV_ROUND_UP(10, ns) << SSB_FLASH_WCNT_1_SHIFT; /* Waitcount-1 = 10nS */ 451 tmp |= DIV_ROUND_UP(120, ns); /* Waitcount-0 = 120nS */ 452 if ((bus->chip_id == 0x5365) || 453 (dev->id.revision < 9)) 454 chipco_write32(cc, SSB_CHIPCO_FLASH_WAITCNT, tmp); 455 if ((bus->chip_id == 0x5365) || 456 (dev->id.revision < 9) || 457 ((bus->chip_id == 0x5350) && (bus->chip_rev == 0))) 458 chipco_write32(cc, SSB_CHIPCO_PCMCIA_MEMWAIT, tmp); 459 460 if (bus->chip_id == 0x5350) { 461 /* Enable EXTIF */ 462 tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT; /* Waitcount-3 = 10ns */ 463 tmp |= DIV_ROUND_UP(20, ns) << SSB_PROG_WCNT_2_SHIFT; /* Waitcount-2 = 20ns */ 464 tmp |= DIV_ROUND_UP(100, ns) << SSB_PROG_WCNT_1_SHIFT; /* Waitcount-1 = 100ns */ 465 tmp |= DIV_ROUND_UP(120, ns); /* Waitcount-0 = 120ns */ 466 chipco_write32(cc, SSB_CHIPCO_PROG_WAITCNT, tmp); /* 0x01020a0c for a 100Mhz clock */ 467 } 468 } 469 470 /* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */ 471 u32 ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc, u32 ticks) 472 { 473 u32 maxt; 474 enum ssb_clkmode clkmode; 475 476 maxt = ssb_chipco_watchdog_get_max_timer(cc); 477 if (cc->capabilities & SSB_CHIPCO_CAP_PMU) { 478 if (ticks == 1) 479 ticks = 2; 480 else if (ticks > maxt) 481 ticks = maxt; 482 chipco_write32(cc, SSB_CHIPCO_PMU_WATCHDOG, ticks); 483 } else { 484 clkmode = ticks ? SSB_CLKMODE_FAST : SSB_CLKMODE_DYNAMIC; 485 ssb_chipco_set_clockmode(cc, clkmode); 486 if (ticks > maxt) 487 ticks = maxt; 488 /* instant NMI */ 489 chipco_write32(cc, SSB_CHIPCO_WATCHDOG, ticks); 490 } 491 return ticks; 492 } 493 494 void ssb_chipco_irq_mask(struct ssb_chipcommon *cc, u32 mask, u32 value) 495 { 496 chipco_write32_masked(cc, SSB_CHIPCO_IRQMASK, mask, value); 497 } 498 499 u32 ssb_chipco_irq_status(struct ssb_chipcommon *cc, u32 mask) 500 { 501 return chipco_read32(cc, SSB_CHIPCO_IRQSTAT) & mask; 502 } 503 504 u32 ssb_chipco_gpio_in(struct ssb_chipcommon *cc, u32 mask) 505 { 506 return chipco_read32(cc, SSB_CHIPCO_GPIOIN) & mask; 507 } 508 509 u32 ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value) 510 { 511 unsigned long flags; 512 u32 res = 0; 513 514 spin_lock_irqsave(&cc->gpio_lock, flags); 515 res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUT, mask, value); 516 spin_unlock_irqrestore(&cc->gpio_lock, flags); 517 518 return res; 519 } 520 521 u32 ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value) 522 { 523 unsigned long flags; 524 u32 res = 0; 525 526 spin_lock_irqsave(&cc->gpio_lock, flags); 527 res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUTEN, mask, value); 528 spin_unlock_irqrestore(&cc->gpio_lock, flags); 529 530 return res; 531 } 532 533 u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value) 534 { 535 unsigned long flags; 536 u32 res = 0; 537 538 spin_lock_irqsave(&cc->gpio_lock, flags); 539 res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value); 540 spin_unlock_irqrestore(&cc->gpio_lock, flags); 541 542 return res; 543 } 544 EXPORT_SYMBOL(ssb_chipco_gpio_control); 545 546 u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value) 547 { 548 unsigned long flags; 549 u32 res = 0; 550 551 spin_lock_irqsave(&cc->gpio_lock, flags); 552 res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOIRQ, mask, value); 553 spin_unlock_irqrestore(&cc->gpio_lock, flags); 554 555 return res; 556 } 557 558 u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value) 559 { 560 unsigned long flags; 561 u32 res = 0; 562 563 spin_lock_irqsave(&cc->gpio_lock, flags); 564 res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOPOL, mask, value); 565 spin_unlock_irqrestore(&cc->gpio_lock, flags); 566 567 return res; 568 } 569 570 u32 ssb_chipco_gpio_pullup(struct ssb_chipcommon *cc, u32 mask, u32 value) 571 { 572 unsigned long flags; 573 u32 res = 0; 574 575 if (cc->dev->id.revision < 20) 576 return 0xffffffff; 577 578 spin_lock_irqsave(&cc->gpio_lock, flags); 579 res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOPULLUP, mask, value); 580 spin_unlock_irqrestore(&cc->gpio_lock, flags); 581 582 return res; 583 } 584 585 u32 ssb_chipco_gpio_pulldown(struct ssb_chipcommon *cc, u32 mask, u32 value) 586 { 587 unsigned long flags; 588 u32 res = 0; 589 590 if (cc->dev->id.revision < 20) 591 return 0xffffffff; 592 593 spin_lock_irqsave(&cc->gpio_lock, flags); 594 res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOPULLDOWN, mask, value); 595 spin_unlock_irqrestore(&cc->gpio_lock, flags); 596 597 return res; 598 } 599 600 #ifdef CONFIG_SSB_SERIAL 601 int ssb_chipco_serial_init(struct ssb_chipcommon *cc, 602 struct ssb_serial_port *ports) 603 { 604 struct ssb_bus *bus = cc->dev->bus; 605 int nr_ports = 0; 606 u32 plltype; 607 unsigned int irq; 608 u32 baud_base, div; 609 u32 i, n; 610 unsigned int ccrev = cc->dev->id.revision; 611 612 plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT); 613 irq = ssb_mips_irq(cc->dev); 614 615 if (plltype == SSB_PLLTYPE_1) { 616 /* PLL clock */ 617 baud_base = ssb_calc_clock_rate(plltype, 618 chipco_read32(cc, SSB_CHIPCO_CLOCK_N), 619 chipco_read32(cc, SSB_CHIPCO_CLOCK_M2)); 620 div = 1; 621 } else { 622 if (ccrev == 20) { 623 /* BCM5354 uses constant 25MHz clock */ 624 baud_base = 25000000; 625 div = 48; 626 /* Set the override bit so we don't divide it */ 627 chipco_write32(cc, SSB_CHIPCO_CORECTL, 628 chipco_read32(cc, SSB_CHIPCO_CORECTL) 629 | SSB_CHIPCO_CORECTL_UARTCLK0); 630 } else if ((ccrev >= 11) && (ccrev != 15)) { 631 baud_base = ssb_chipco_alp_clock(cc); 632 div = 1; 633 if (ccrev >= 21) { 634 /* Turn off UART clock before switching clocksource. */ 635 chipco_write32(cc, SSB_CHIPCO_CORECTL, 636 chipco_read32(cc, SSB_CHIPCO_CORECTL) 637 & ~SSB_CHIPCO_CORECTL_UARTCLKEN); 638 } 639 /* Set the override bit so we don't divide it */ 640 chipco_write32(cc, SSB_CHIPCO_CORECTL, 641 chipco_read32(cc, SSB_CHIPCO_CORECTL) 642 | SSB_CHIPCO_CORECTL_UARTCLK0); 643 if (ccrev >= 21) { 644 /* Re-enable the UART clock. */ 645 chipco_write32(cc, SSB_CHIPCO_CORECTL, 646 chipco_read32(cc, SSB_CHIPCO_CORECTL) 647 | SSB_CHIPCO_CORECTL_UARTCLKEN); 648 } 649 } else if (ccrev >= 3) { 650 /* Internal backplane clock */ 651 baud_base = ssb_clockspeed(bus); 652 div = chipco_read32(cc, SSB_CHIPCO_CLKDIV) 653 & SSB_CHIPCO_CLKDIV_UART; 654 } else { 655 /* Fixed internal backplane clock */ 656 baud_base = 88000000; 657 div = 48; 658 } 659 660 /* Clock source depends on strapping if UartClkOverride is unset */ 661 if ((ccrev > 0) && 662 !(chipco_read32(cc, SSB_CHIPCO_CORECTL) & SSB_CHIPCO_CORECTL_UARTCLK0)) { 663 if ((cc->capabilities & SSB_CHIPCO_CAP_UARTCLK) == 664 SSB_CHIPCO_CAP_UARTCLK_INT) { 665 /* Internal divided backplane clock */ 666 baud_base /= div; 667 } else { 668 /* Assume external clock of 1.8432 MHz */ 669 baud_base = 1843200; 670 } 671 } 672 } 673 674 /* Determine the registers of the UARTs */ 675 n = (cc->capabilities & SSB_CHIPCO_CAP_NRUART); 676 for (i = 0; i < n; i++) { 677 void __iomem *cc_mmio; 678 void __iomem *uart_regs; 679 680 cc_mmio = cc->dev->bus->mmio + (cc->dev->core_index * SSB_CORE_SIZE); 681 uart_regs = cc_mmio + SSB_CHIPCO_UART0_DATA; 682 /* Offset changed at after rev 0 */ 683 if (ccrev == 0) 684 uart_regs += (i * 8); 685 else 686 uart_regs += (i * 256); 687 688 nr_ports++; 689 ports[i].regs = uart_regs; 690 ports[i].irq = irq; 691 ports[i].baud_base = baud_base; 692 ports[i].reg_shift = 0; 693 } 694 695 return nr_ports; 696 } 697 #endif /* CONFIG_SSB_SERIAL */ 698