1 /* 2 * STMicroelectronics STM32 SPI Controller driver (master mode only) 3 * 4 * Copyright (C) 2017, STMicroelectronics - All Rights Reserved 5 * Author(s): Amelie Delaunay <amelie.delaunay@st.com> for STMicroelectronics. 6 * 7 * License terms: GPL V2.0. 8 * 9 * spi_stm32 driver is free software; you can redistribute it and/or modify it 10 * under the terms of the GNU General Public License version 2 as published by 11 * the Free Software Foundation. 12 * 13 * spi_stm32 driver is distributed in the hope that it will be useful, but 14 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 15 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more 16 * details. 17 * 18 * You should have received a copy of the GNU General Public License along with 19 * spi_stm32 driver. If not, see <http://www.gnu.org/licenses/>. 20 */ 21 #include <linux/debugfs.h> 22 #include <linux/clk.h> 23 #include <linux/delay.h> 24 #include <linux/dmaengine.h> 25 #include <linux/gpio.h> 26 #include <linux/interrupt.h> 27 #include <linux/iopoll.h> 28 #include <linux/module.h> 29 #include <linux/of_platform.h> 30 #include <linux/pm_runtime.h> 31 #include <linux/reset.h> 32 #include <linux/spi/spi.h> 33 34 #define DRIVER_NAME "spi_stm32" 35 36 /* STM32 SPI registers */ 37 #define STM32_SPI_CR1 0x00 38 #define STM32_SPI_CR2 0x04 39 #define STM32_SPI_CFG1 0x08 40 #define STM32_SPI_CFG2 0x0C 41 #define STM32_SPI_IER 0x10 42 #define STM32_SPI_SR 0x14 43 #define STM32_SPI_IFCR 0x18 44 #define STM32_SPI_TXDR 0x20 45 #define STM32_SPI_RXDR 0x30 46 #define STM32_SPI_I2SCFGR 0x50 47 48 /* STM32_SPI_CR1 bit fields */ 49 #define SPI_CR1_SPE BIT(0) 50 #define SPI_CR1_MASRX BIT(8) 51 #define SPI_CR1_CSTART BIT(9) 52 #define SPI_CR1_CSUSP BIT(10) 53 #define SPI_CR1_HDDIR BIT(11) 54 #define SPI_CR1_SSI BIT(12) 55 56 /* STM32_SPI_CR2 bit fields */ 57 #define SPI_CR2_TSIZE_SHIFT 0 58 #define SPI_CR2_TSIZE GENMASK(15, 0) 59 60 /* STM32_SPI_CFG1 bit fields */ 61 #define SPI_CFG1_DSIZE_SHIFT 0 62 #define SPI_CFG1_DSIZE GENMASK(4, 0) 63 #define SPI_CFG1_FTHLV_SHIFT 5 64 #define SPI_CFG1_FTHLV GENMASK(8, 5) 65 #define SPI_CFG1_RXDMAEN BIT(14) 66 #define SPI_CFG1_TXDMAEN BIT(15) 67 #define SPI_CFG1_MBR_SHIFT 28 68 #define SPI_CFG1_MBR GENMASK(30, 28) 69 #define SPI_CFG1_MBR_MIN 0 70 #define SPI_CFG1_MBR_MAX (GENMASK(30, 28) >> 28) 71 72 /* STM32_SPI_CFG2 bit fields */ 73 #define SPI_CFG2_MIDI_SHIFT 4 74 #define SPI_CFG2_MIDI GENMASK(7, 4) 75 #define SPI_CFG2_COMM_SHIFT 17 76 #define SPI_CFG2_COMM GENMASK(18, 17) 77 #define SPI_CFG2_SP_SHIFT 19 78 #define SPI_CFG2_SP GENMASK(21, 19) 79 #define SPI_CFG2_MASTER BIT(22) 80 #define SPI_CFG2_LSBFRST BIT(23) 81 #define SPI_CFG2_CPHA BIT(24) 82 #define SPI_CFG2_CPOL BIT(25) 83 #define SPI_CFG2_SSM BIT(26) 84 #define SPI_CFG2_AFCNTR BIT(31) 85 86 /* STM32_SPI_IER bit fields */ 87 #define SPI_IER_RXPIE BIT(0) 88 #define SPI_IER_TXPIE BIT(1) 89 #define SPI_IER_DXPIE BIT(2) 90 #define SPI_IER_EOTIE BIT(3) 91 #define SPI_IER_TXTFIE BIT(4) 92 #define SPI_IER_OVRIE BIT(6) 93 #define SPI_IER_MODFIE BIT(9) 94 #define SPI_IER_ALL GENMASK(10, 0) 95 96 /* STM32_SPI_SR bit fields */ 97 #define SPI_SR_RXP BIT(0) 98 #define SPI_SR_TXP BIT(1) 99 #define SPI_SR_EOT BIT(3) 100 #define SPI_SR_OVR BIT(6) 101 #define SPI_SR_MODF BIT(9) 102 #define SPI_SR_SUSP BIT(11) 103 #define SPI_SR_RXPLVL_SHIFT 13 104 #define SPI_SR_RXPLVL GENMASK(14, 13) 105 #define SPI_SR_RXWNE BIT(15) 106 107 /* STM32_SPI_IFCR bit fields */ 108 #define SPI_IFCR_ALL GENMASK(11, 3) 109 110 /* STM32_SPI_I2SCFGR bit fields */ 111 #define SPI_I2SCFGR_I2SMOD BIT(0) 112 113 /* SPI Master Baud Rate min/max divisor */ 114 #define SPI_MBR_DIV_MIN (2 << SPI_CFG1_MBR_MIN) 115 #define SPI_MBR_DIV_MAX (2 << SPI_CFG1_MBR_MAX) 116 117 /* SPI Communication mode */ 118 #define SPI_FULL_DUPLEX 0 119 #define SPI_SIMPLEX_TX 1 120 #define SPI_SIMPLEX_RX 2 121 #define SPI_HALF_DUPLEX 3 122 123 #define SPI_1HZ_NS 1000000000 124 125 /** 126 * struct stm32_spi - private data of the SPI controller 127 * @dev: driver model representation of the controller 128 * @master: controller master interface 129 * @base: virtual memory area 130 * @clk: hw kernel clock feeding the SPI clock generator 131 * @clk_rate: rate of the hw kernel clock feeding the SPI clock generator 132 * @rst: SPI controller reset line 133 * @lock: prevent I/O concurrent access 134 * @irq: SPI controller interrupt line 135 * @fifo_size: size of the embedded fifo in bytes 136 * @cur_midi: master inter-data idleness in ns 137 * @cur_speed: speed configured in Hz 138 * @cur_bpw: number of bits in a single SPI data frame 139 * @cur_fthlv: fifo threshold level (data frames in a single data packet) 140 * @cur_comm: SPI communication mode 141 * @cur_xferlen: current transfer length in bytes 142 * @cur_usedma: boolean to know if dma is used in current transfer 143 * @tx_buf: data to be written, or NULL 144 * @rx_buf: data to be read, or NULL 145 * @tx_len: number of data to be written in bytes 146 * @rx_len: number of data to be read in bytes 147 * @dma_tx: dma channel for TX transfer 148 * @dma_rx: dma channel for RX transfer 149 * @phys_addr: SPI registers physical base address 150 */ 151 struct stm32_spi { 152 struct device *dev; 153 struct spi_master *master; 154 void __iomem *base; 155 struct clk *clk; 156 u32 clk_rate; 157 struct reset_control *rst; 158 spinlock_t lock; /* prevent I/O concurrent access */ 159 int irq; 160 unsigned int fifo_size; 161 162 unsigned int cur_midi; 163 unsigned int cur_speed; 164 unsigned int cur_bpw; 165 unsigned int cur_fthlv; 166 unsigned int cur_comm; 167 unsigned int cur_xferlen; 168 bool cur_usedma; 169 170 const void *tx_buf; 171 void *rx_buf; 172 int tx_len; 173 int rx_len; 174 struct dma_chan *dma_tx; 175 struct dma_chan *dma_rx; 176 dma_addr_t phys_addr; 177 }; 178 179 static inline void stm32_spi_set_bits(struct stm32_spi *spi, 180 u32 offset, u32 bits) 181 { 182 writel_relaxed(readl_relaxed(spi->base + offset) | bits, 183 spi->base + offset); 184 } 185 186 static inline void stm32_spi_clr_bits(struct stm32_spi *spi, 187 u32 offset, u32 bits) 188 { 189 writel_relaxed(readl_relaxed(spi->base + offset) & ~bits, 190 spi->base + offset); 191 } 192 193 /** 194 * stm32_spi_get_fifo_size - Return fifo size 195 * @spi: pointer to the spi controller data structure 196 */ 197 static int stm32_spi_get_fifo_size(struct stm32_spi *spi) 198 { 199 unsigned long flags; 200 u32 count = 0; 201 202 spin_lock_irqsave(&spi->lock, flags); 203 204 stm32_spi_set_bits(spi, STM32_SPI_CR1, SPI_CR1_SPE); 205 206 while (readl_relaxed(spi->base + STM32_SPI_SR) & SPI_SR_TXP) 207 writeb_relaxed(++count, spi->base + STM32_SPI_TXDR); 208 209 stm32_spi_clr_bits(spi, STM32_SPI_CR1, SPI_CR1_SPE); 210 211 spin_unlock_irqrestore(&spi->lock, flags); 212 213 dev_dbg(spi->dev, "%d x 8-bit fifo size\n", count); 214 215 return count; 216 } 217 218 /** 219 * stm32_spi_get_bpw_mask - Return bits per word mask 220 * @spi: pointer to the spi controller data structure 221 */ 222 static int stm32_spi_get_bpw_mask(struct stm32_spi *spi) 223 { 224 unsigned long flags; 225 u32 cfg1, max_bpw; 226 227 spin_lock_irqsave(&spi->lock, flags); 228 229 /* 230 * The most significant bit at DSIZE bit field is reserved when the 231 * maximum data size of periperal instances is limited to 16-bit 232 */ 233 stm32_spi_set_bits(spi, STM32_SPI_CFG1, SPI_CFG1_DSIZE); 234 235 cfg1 = readl_relaxed(spi->base + STM32_SPI_CFG1); 236 max_bpw = (cfg1 & SPI_CFG1_DSIZE) >> SPI_CFG1_DSIZE_SHIFT; 237 max_bpw += 1; 238 239 spin_unlock_irqrestore(&spi->lock, flags); 240 241 dev_dbg(spi->dev, "%d-bit maximum data frame\n", max_bpw); 242 243 return SPI_BPW_RANGE_MASK(4, max_bpw); 244 } 245 246 /** 247 * stm32_spi_prepare_mbr - Determine SPI_CFG1.MBR value 248 * @spi: pointer to the spi controller data structure 249 * @speed_hz: requested speed 250 * 251 * Return SPI_CFG1.MBR value in case of success or -EINVAL 252 */ 253 static int stm32_spi_prepare_mbr(struct stm32_spi *spi, u32 speed_hz) 254 { 255 u32 div, mbrdiv; 256 257 div = DIV_ROUND_UP(spi->clk_rate, speed_hz); 258 259 /* 260 * SPI framework set xfer->speed_hz to master->max_speed_hz if 261 * xfer->speed_hz is greater than master->max_speed_hz, and it returns 262 * an error when xfer->speed_hz is lower than master->min_speed_hz, so 263 * no need to check it there. 264 * However, we need to ensure the following calculations. 265 */ 266 if ((div < SPI_MBR_DIV_MIN) && 267 (div > SPI_MBR_DIV_MAX)) 268 return -EINVAL; 269 270 /* Determine the first power of 2 greater than or equal to div */ 271 if (div & (div - 1)) 272 mbrdiv = fls(div); 273 else 274 mbrdiv = fls(div) - 1; 275 276 spi->cur_speed = spi->clk_rate / (1 << mbrdiv); 277 278 return mbrdiv - 1; 279 } 280 281 /** 282 * stm32_spi_prepare_fthlv - Determine FIFO threshold level 283 * @spi: pointer to the spi controller data structure 284 */ 285 static u32 stm32_spi_prepare_fthlv(struct stm32_spi *spi) 286 { 287 u32 fthlv, half_fifo; 288 289 /* data packet should not exceed 1/2 of fifo space */ 290 half_fifo = (spi->fifo_size / 2); 291 292 if (spi->cur_bpw <= 8) 293 fthlv = half_fifo; 294 else if (spi->cur_bpw <= 16) 295 fthlv = half_fifo / 2; 296 else 297 fthlv = half_fifo / 4; 298 299 /* align packet size with data registers access */ 300 if (spi->cur_bpw > 8) 301 fthlv -= (fthlv % 2); /* multiple of 2 */ 302 else 303 fthlv -= (fthlv % 4); /* multiple of 4 */ 304 305 return fthlv; 306 } 307 308 /** 309 * stm32_spi_write_txfifo - Write bytes in Transmit Data Register 310 * @spi: pointer to the spi controller data structure 311 * 312 * Read from tx_buf depends on remaining bytes to avoid to read beyond 313 * tx_buf end. 314 */ 315 static void stm32_spi_write_txfifo(struct stm32_spi *spi) 316 { 317 while ((spi->tx_len > 0) && 318 (readl_relaxed(spi->base + STM32_SPI_SR) & SPI_SR_TXP)) { 319 u32 offs = spi->cur_xferlen - spi->tx_len; 320 321 if (spi->tx_len >= sizeof(u32)) { 322 const u32 *tx_buf32 = (const u32 *)(spi->tx_buf + offs); 323 324 writel_relaxed(*tx_buf32, spi->base + STM32_SPI_TXDR); 325 spi->tx_len -= sizeof(u32); 326 } else if (spi->tx_len >= sizeof(u16)) { 327 const u16 *tx_buf16 = (const u16 *)(spi->tx_buf + offs); 328 329 writew_relaxed(*tx_buf16, spi->base + STM32_SPI_TXDR); 330 spi->tx_len -= sizeof(u16); 331 } else { 332 const u8 *tx_buf8 = (const u8 *)(spi->tx_buf + offs); 333 334 writeb_relaxed(*tx_buf8, spi->base + STM32_SPI_TXDR); 335 spi->tx_len -= sizeof(u8); 336 } 337 } 338 339 dev_dbg(spi->dev, "%s: %d bytes left\n", __func__, spi->tx_len); 340 } 341 342 /** 343 * stm32_spi_read_rxfifo - Read bytes in Receive Data Register 344 * @spi: pointer to the spi controller data structure 345 * 346 * Write in rx_buf depends on remaining bytes to avoid to write beyond 347 * rx_buf end. 348 */ 349 static void stm32_spi_read_rxfifo(struct stm32_spi *spi, bool flush) 350 { 351 u32 sr = readl_relaxed(spi->base + STM32_SPI_SR); 352 u32 rxplvl = (sr & SPI_SR_RXPLVL) >> SPI_SR_RXPLVL_SHIFT; 353 354 while ((spi->rx_len > 0) && 355 ((sr & SPI_SR_RXP) || 356 (flush && ((sr & SPI_SR_RXWNE) || (rxplvl > 0))))) { 357 u32 offs = spi->cur_xferlen - spi->rx_len; 358 359 if ((spi->rx_len >= sizeof(u32)) || 360 (flush && (sr & SPI_SR_RXWNE))) { 361 u32 *rx_buf32 = (u32 *)(spi->rx_buf + offs); 362 363 *rx_buf32 = readl_relaxed(spi->base + STM32_SPI_RXDR); 364 spi->rx_len -= sizeof(u32); 365 } else if ((spi->rx_len >= sizeof(u16)) || 366 (flush && (rxplvl >= 2 || spi->cur_bpw > 8))) { 367 u16 *rx_buf16 = (u16 *)(spi->rx_buf + offs); 368 369 *rx_buf16 = readw_relaxed(spi->base + STM32_SPI_RXDR); 370 spi->rx_len -= sizeof(u16); 371 } else { 372 u8 *rx_buf8 = (u8 *)(spi->rx_buf + offs); 373 374 *rx_buf8 = readb_relaxed(spi->base + STM32_SPI_RXDR); 375 spi->rx_len -= sizeof(u8); 376 } 377 378 sr = readl_relaxed(spi->base + STM32_SPI_SR); 379 rxplvl = (sr & SPI_SR_RXPLVL) >> SPI_SR_RXPLVL_SHIFT; 380 } 381 382 dev_dbg(spi->dev, "%s%s: %d bytes left\n", __func__, 383 flush ? "(flush)" : "", spi->rx_len); 384 } 385 386 /** 387 * stm32_spi_enable - Enable SPI controller 388 * @spi: pointer to the spi controller data structure 389 * 390 * SPI data transfer is enabled but spi_ker_ck is idle. 391 * SPI_CFG1 and SPI_CFG2 are now write protected. 392 */ 393 static void stm32_spi_enable(struct stm32_spi *spi) 394 { 395 dev_dbg(spi->dev, "enable controller\n"); 396 397 stm32_spi_set_bits(spi, STM32_SPI_CR1, SPI_CR1_SPE); 398 } 399 400 /** 401 * stm32_spi_disable - Disable SPI controller 402 * @spi: pointer to the spi controller data structure 403 * 404 * RX-Fifo is flushed when SPI controller is disabled. To prevent any data 405 * loss, use stm32_spi_read_rxfifo(flush) to read the remaining bytes in 406 * RX-Fifo. 407 */ 408 static void stm32_spi_disable(struct stm32_spi *spi) 409 { 410 unsigned long flags; 411 u32 cr1, sr; 412 413 dev_dbg(spi->dev, "disable controller\n"); 414 415 spin_lock_irqsave(&spi->lock, flags); 416 417 cr1 = readl_relaxed(spi->base + STM32_SPI_CR1); 418 419 if (!(cr1 & SPI_CR1_SPE)) { 420 spin_unlock_irqrestore(&spi->lock, flags); 421 return; 422 } 423 424 /* Wait on EOT or suspend the flow */ 425 if (readl_relaxed_poll_timeout_atomic(spi->base + STM32_SPI_SR, 426 sr, !(sr & SPI_SR_EOT), 427 10, 100000) < 0) { 428 if (cr1 & SPI_CR1_CSTART) { 429 writel_relaxed(cr1 | SPI_CR1_CSUSP, 430 spi->base + STM32_SPI_CR1); 431 if (readl_relaxed_poll_timeout_atomic( 432 spi->base + STM32_SPI_SR, 433 sr, !(sr & SPI_SR_SUSP), 434 10, 100000) < 0) 435 dev_warn(spi->dev, 436 "Suspend request timeout\n"); 437 } 438 } 439 440 if (!spi->cur_usedma && spi->rx_buf && (spi->rx_len > 0)) 441 stm32_spi_read_rxfifo(spi, true); 442 443 if (spi->cur_usedma && spi->tx_buf) 444 dmaengine_terminate_all(spi->dma_tx); 445 if (spi->cur_usedma && spi->rx_buf) 446 dmaengine_terminate_all(spi->dma_rx); 447 448 stm32_spi_clr_bits(spi, STM32_SPI_CR1, SPI_CR1_SPE); 449 450 stm32_spi_clr_bits(spi, STM32_SPI_CFG1, SPI_CFG1_TXDMAEN | 451 SPI_CFG1_RXDMAEN); 452 453 /* Disable interrupts and clear status flags */ 454 writel_relaxed(0, spi->base + STM32_SPI_IER); 455 writel_relaxed(SPI_IFCR_ALL, spi->base + STM32_SPI_IFCR); 456 457 spin_unlock_irqrestore(&spi->lock, flags); 458 } 459 460 /** 461 * stm32_spi_can_dma - Determine if the transfer is eligible for DMA use 462 * 463 * If the current transfer size is greater than fifo size, use DMA. 464 */ 465 static bool stm32_spi_can_dma(struct spi_master *master, 466 struct spi_device *spi_dev, 467 struct spi_transfer *transfer) 468 { 469 struct stm32_spi *spi = spi_master_get_devdata(master); 470 471 dev_dbg(spi->dev, "%s: %s\n", __func__, 472 (transfer->len > spi->fifo_size) ? "true" : "false"); 473 474 return (transfer->len > spi->fifo_size); 475 } 476 477 /** 478 * stm32_spi_irq - Interrupt handler for SPI controller events 479 * @irq: interrupt line 480 * @dev_id: SPI controller master interface 481 */ 482 static irqreturn_t stm32_spi_irq(int irq, void *dev_id) 483 { 484 struct spi_master *master = dev_id; 485 struct stm32_spi *spi = spi_master_get_devdata(master); 486 u32 sr, ier, mask; 487 unsigned long flags; 488 bool end = false; 489 490 spin_lock_irqsave(&spi->lock, flags); 491 492 sr = readl_relaxed(spi->base + STM32_SPI_SR); 493 ier = readl_relaxed(spi->base + STM32_SPI_IER); 494 495 mask = ier; 496 /* EOTIE is triggered on EOT, SUSP and TXC events. */ 497 mask |= SPI_SR_SUSP; 498 /* 499 * When TXTF is set, DXPIE and TXPIE are cleared. So in case of 500 * Full-Duplex, need to poll RXP event to know if there are remaining 501 * data, before disabling SPI. 502 */ 503 if (spi->rx_buf && !spi->cur_usedma) 504 mask |= SPI_SR_RXP; 505 506 if (!(sr & mask)) { 507 dev_dbg(spi->dev, "spurious IT (sr=0x%08x, ier=0x%08x)\n", 508 sr, ier); 509 spin_unlock_irqrestore(&spi->lock, flags); 510 return IRQ_NONE; 511 } 512 513 if (sr & SPI_SR_SUSP) { 514 dev_warn(spi->dev, "Communication suspended\n"); 515 if (!spi->cur_usedma && (spi->rx_buf && (spi->rx_len > 0))) 516 stm32_spi_read_rxfifo(spi, false); 517 /* 518 * If communication is suspended while using DMA, it means 519 * that something went wrong, so stop the current transfer 520 */ 521 if (spi->cur_usedma) 522 end = true; 523 } 524 525 if (sr & SPI_SR_MODF) { 526 dev_warn(spi->dev, "Mode fault: transfer aborted\n"); 527 end = true; 528 } 529 530 if (sr & SPI_SR_OVR) { 531 dev_warn(spi->dev, "Overrun: received value discarded\n"); 532 if (!spi->cur_usedma && (spi->rx_buf && (spi->rx_len > 0))) 533 stm32_spi_read_rxfifo(spi, false); 534 /* 535 * If overrun is detected while using DMA, it means that 536 * something went wrong, so stop the current transfer 537 */ 538 if (spi->cur_usedma) 539 end = true; 540 } 541 542 if (sr & SPI_SR_EOT) { 543 if (!spi->cur_usedma && (spi->rx_buf && (spi->rx_len > 0))) 544 stm32_spi_read_rxfifo(spi, true); 545 end = true; 546 } 547 548 if (sr & SPI_SR_TXP) 549 if (!spi->cur_usedma && (spi->tx_buf && (spi->tx_len > 0))) 550 stm32_spi_write_txfifo(spi); 551 552 if (sr & SPI_SR_RXP) 553 if (!spi->cur_usedma && (spi->rx_buf && (spi->rx_len > 0))) 554 stm32_spi_read_rxfifo(spi, false); 555 556 writel_relaxed(mask, spi->base + STM32_SPI_IFCR); 557 558 spin_unlock_irqrestore(&spi->lock, flags); 559 560 if (end) { 561 spi_finalize_current_transfer(master); 562 stm32_spi_disable(spi); 563 } 564 565 return IRQ_HANDLED; 566 } 567 568 /** 569 * stm32_spi_setup - setup device chip select 570 */ 571 static int stm32_spi_setup(struct spi_device *spi_dev) 572 { 573 int ret = 0; 574 575 if (!gpio_is_valid(spi_dev->cs_gpio)) { 576 dev_err(&spi_dev->dev, "%d is not a valid gpio\n", 577 spi_dev->cs_gpio); 578 return -EINVAL; 579 } 580 581 dev_dbg(&spi_dev->dev, "%s: set gpio%d output %s\n", __func__, 582 spi_dev->cs_gpio, 583 (spi_dev->mode & SPI_CS_HIGH) ? "low" : "high"); 584 585 ret = gpio_direction_output(spi_dev->cs_gpio, 586 !(spi_dev->mode & SPI_CS_HIGH)); 587 588 return ret; 589 } 590 591 /** 592 * stm32_spi_prepare_msg - set up the controller to transfer a single message 593 */ 594 static int stm32_spi_prepare_msg(struct spi_master *master, 595 struct spi_message *msg) 596 { 597 struct stm32_spi *spi = spi_master_get_devdata(master); 598 struct spi_device *spi_dev = msg->spi; 599 struct device_node *np = spi_dev->dev.of_node; 600 unsigned long flags; 601 u32 cfg2_clrb = 0, cfg2_setb = 0; 602 603 /* SPI slave device may need time between data frames */ 604 spi->cur_midi = 0; 605 if (np && !of_property_read_u32(np, "st,spi-midi-ns", &spi->cur_midi)) 606 dev_dbg(spi->dev, "%dns inter-data idleness\n", spi->cur_midi); 607 608 if (spi_dev->mode & SPI_CPOL) 609 cfg2_setb |= SPI_CFG2_CPOL; 610 else 611 cfg2_clrb |= SPI_CFG2_CPOL; 612 613 if (spi_dev->mode & SPI_CPHA) 614 cfg2_setb |= SPI_CFG2_CPHA; 615 else 616 cfg2_clrb |= SPI_CFG2_CPHA; 617 618 if (spi_dev->mode & SPI_LSB_FIRST) 619 cfg2_setb |= SPI_CFG2_LSBFRST; 620 else 621 cfg2_clrb |= SPI_CFG2_LSBFRST; 622 623 dev_dbg(spi->dev, "cpol=%d cpha=%d lsb_first=%d cs_high=%d\n", 624 spi_dev->mode & SPI_CPOL, 625 spi_dev->mode & SPI_CPHA, 626 spi_dev->mode & SPI_LSB_FIRST, 627 spi_dev->mode & SPI_CS_HIGH); 628 629 spin_lock_irqsave(&spi->lock, flags); 630 631 if (cfg2_clrb || cfg2_setb) 632 writel_relaxed( 633 (readl_relaxed(spi->base + STM32_SPI_CFG2) & 634 ~cfg2_clrb) | cfg2_setb, 635 spi->base + STM32_SPI_CFG2); 636 637 spin_unlock_irqrestore(&spi->lock, flags); 638 639 return 0; 640 } 641 642 /** 643 * stm32_spi_dma_cb - dma callback 644 * 645 * DMA callback is called when the transfer is complete or when an error 646 * occurs. If the transfer is complete, EOT flag is raised. 647 */ 648 static void stm32_spi_dma_cb(void *data) 649 { 650 struct stm32_spi *spi = data; 651 unsigned long flags; 652 u32 sr; 653 654 spin_lock_irqsave(&spi->lock, flags); 655 656 sr = readl_relaxed(spi->base + STM32_SPI_SR); 657 658 spin_unlock_irqrestore(&spi->lock, flags); 659 660 if (!(sr & SPI_SR_EOT)) 661 dev_warn(spi->dev, "DMA error (sr=0x%08x)\n", sr); 662 663 /* Now wait for EOT, or SUSP or OVR in case of error */ 664 } 665 666 /** 667 * stm32_spi_dma_config - configure dma slave channel depending on current 668 * transfer bits_per_word. 669 */ 670 static void stm32_spi_dma_config(struct stm32_spi *spi, 671 struct dma_slave_config *dma_conf, 672 enum dma_transfer_direction dir) 673 { 674 enum dma_slave_buswidth buswidth; 675 u32 maxburst; 676 677 if (spi->cur_bpw <= 8) 678 buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE; 679 else if (spi->cur_bpw <= 16) 680 buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES; 681 else 682 buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES; 683 684 /* Valid for DMA Half or Full Fifo threshold */ 685 if (spi->cur_fthlv == 2) 686 maxburst = 1; 687 else 688 maxburst = spi->cur_fthlv; 689 690 memset(dma_conf, 0, sizeof(struct dma_slave_config)); 691 dma_conf->direction = dir; 692 if (dma_conf->direction == DMA_DEV_TO_MEM) { /* RX */ 693 dma_conf->src_addr = spi->phys_addr + STM32_SPI_RXDR; 694 dma_conf->src_addr_width = buswidth; 695 dma_conf->src_maxburst = maxburst; 696 697 dev_dbg(spi->dev, "Rx DMA config buswidth=%d, maxburst=%d\n", 698 buswidth, maxburst); 699 } else if (dma_conf->direction == DMA_MEM_TO_DEV) { /* TX */ 700 dma_conf->dst_addr = spi->phys_addr + STM32_SPI_TXDR; 701 dma_conf->dst_addr_width = buswidth; 702 dma_conf->dst_maxburst = maxburst; 703 704 dev_dbg(spi->dev, "Tx DMA config buswidth=%d, maxburst=%d\n", 705 buswidth, maxburst); 706 } 707 } 708 709 /** 710 * stm32_spi_transfer_one_irq - transfer a single spi_transfer using 711 * interrupts 712 * 713 * It must returns 0 if the transfer is finished or 1 if the transfer is still 714 * in progress. 715 */ 716 static int stm32_spi_transfer_one_irq(struct stm32_spi *spi) 717 { 718 unsigned long flags; 719 u32 ier = 0; 720 721 /* Enable the interrupts relative to the current communication mode */ 722 if (spi->tx_buf && spi->rx_buf) /* Full Duplex */ 723 ier |= SPI_IER_DXPIE; 724 else if (spi->tx_buf) /* Half-Duplex TX dir or Simplex TX */ 725 ier |= SPI_IER_TXPIE; 726 else if (spi->rx_buf) /* Half-Duplex RX dir or Simplex RX */ 727 ier |= SPI_IER_RXPIE; 728 729 /* Enable the interrupts relative to the end of transfer */ 730 ier |= SPI_IER_EOTIE | SPI_IER_TXTFIE | SPI_IER_OVRIE | SPI_IER_MODFIE; 731 732 spin_lock_irqsave(&spi->lock, flags); 733 734 stm32_spi_enable(spi); 735 736 /* Be sure to have data in fifo before starting data transfer */ 737 if (spi->tx_buf) 738 stm32_spi_write_txfifo(spi); 739 740 stm32_spi_set_bits(spi, STM32_SPI_CR1, SPI_CR1_CSTART); 741 742 writel_relaxed(ier, spi->base + STM32_SPI_IER); 743 744 spin_unlock_irqrestore(&spi->lock, flags); 745 746 return 1; 747 } 748 749 /** 750 * stm32_spi_transfer_one_dma - transfer a single spi_transfer using DMA 751 * 752 * It must returns 0 if the transfer is finished or 1 if the transfer is still 753 * in progress. 754 */ 755 static int stm32_spi_transfer_one_dma(struct stm32_spi *spi, 756 struct spi_transfer *xfer) 757 { 758 struct dma_slave_config tx_dma_conf, rx_dma_conf; 759 struct dma_async_tx_descriptor *tx_dma_desc, *rx_dma_desc; 760 unsigned long flags; 761 u32 ier = 0; 762 763 spin_lock_irqsave(&spi->lock, flags); 764 765 rx_dma_desc = NULL; 766 if (spi->rx_buf) { 767 stm32_spi_dma_config(spi, &rx_dma_conf, DMA_DEV_TO_MEM); 768 dmaengine_slave_config(spi->dma_rx, &rx_dma_conf); 769 770 /* Enable Rx DMA request */ 771 stm32_spi_set_bits(spi, STM32_SPI_CFG1, SPI_CFG1_RXDMAEN); 772 773 rx_dma_desc = dmaengine_prep_slave_sg( 774 spi->dma_rx, xfer->rx_sg.sgl, 775 xfer->rx_sg.nents, 776 rx_dma_conf.direction, 777 DMA_PREP_INTERRUPT); 778 } 779 780 tx_dma_desc = NULL; 781 if (spi->tx_buf) { 782 stm32_spi_dma_config(spi, &tx_dma_conf, DMA_MEM_TO_DEV); 783 dmaengine_slave_config(spi->dma_tx, &tx_dma_conf); 784 785 tx_dma_desc = dmaengine_prep_slave_sg( 786 spi->dma_tx, xfer->tx_sg.sgl, 787 xfer->tx_sg.nents, 788 tx_dma_conf.direction, 789 DMA_PREP_INTERRUPT); 790 } 791 792 if ((spi->tx_buf && !tx_dma_desc) || 793 (spi->rx_buf && !rx_dma_desc)) 794 goto dma_desc_error; 795 796 if (rx_dma_desc) { 797 rx_dma_desc->callback = stm32_spi_dma_cb; 798 rx_dma_desc->callback_param = spi; 799 800 if (dma_submit_error(dmaengine_submit(rx_dma_desc))) { 801 dev_err(spi->dev, "Rx DMA submit failed\n"); 802 goto dma_desc_error; 803 } 804 /* Enable Rx DMA channel */ 805 dma_async_issue_pending(spi->dma_rx); 806 } 807 808 if (tx_dma_desc) { 809 if (spi->cur_comm == SPI_SIMPLEX_TX) { 810 tx_dma_desc->callback = stm32_spi_dma_cb; 811 tx_dma_desc->callback_param = spi; 812 } 813 814 if (dma_submit_error(dmaengine_submit(tx_dma_desc))) { 815 dev_err(spi->dev, "Tx DMA submit failed\n"); 816 goto dma_submit_error; 817 } 818 /* Enable Tx DMA channel */ 819 dma_async_issue_pending(spi->dma_tx); 820 821 /* Enable Tx DMA request */ 822 stm32_spi_set_bits(spi, STM32_SPI_CFG1, SPI_CFG1_TXDMAEN); 823 } 824 825 /* Enable the interrupts relative to the end of transfer */ 826 ier |= SPI_IER_EOTIE | SPI_IER_TXTFIE | SPI_IER_OVRIE | SPI_IER_MODFIE; 827 writel_relaxed(ier, spi->base + STM32_SPI_IER); 828 829 stm32_spi_enable(spi); 830 831 stm32_spi_set_bits(spi, STM32_SPI_CR1, SPI_CR1_CSTART); 832 833 spin_unlock_irqrestore(&spi->lock, flags); 834 835 return 1; 836 837 dma_submit_error: 838 if (spi->rx_buf) 839 dmaengine_terminate_all(spi->dma_rx); 840 841 dma_desc_error: 842 stm32_spi_clr_bits(spi, STM32_SPI_CFG1, SPI_CFG1_RXDMAEN); 843 844 spin_unlock_irqrestore(&spi->lock, flags); 845 846 dev_info(spi->dev, "DMA issue: fall back to irq transfer\n"); 847 848 return stm32_spi_transfer_one_irq(spi); 849 } 850 851 /** 852 * stm32_spi_transfer_one_setup - common setup to transfer a single 853 * spi_transfer either using DMA or 854 * interrupts. 855 */ 856 static int stm32_spi_transfer_one_setup(struct stm32_spi *spi, 857 struct spi_device *spi_dev, 858 struct spi_transfer *transfer) 859 { 860 unsigned long flags; 861 u32 cfg1_clrb = 0, cfg1_setb = 0, cfg2_clrb = 0, cfg2_setb = 0; 862 u32 mode, nb_words; 863 int ret = 0; 864 865 spin_lock_irqsave(&spi->lock, flags); 866 867 if (spi->cur_bpw != transfer->bits_per_word) { 868 u32 bpw, fthlv; 869 870 spi->cur_bpw = transfer->bits_per_word; 871 bpw = spi->cur_bpw - 1; 872 873 cfg1_clrb |= SPI_CFG1_DSIZE; 874 cfg1_setb |= (bpw << SPI_CFG1_DSIZE_SHIFT) & SPI_CFG1_DSIZE; 875 876 spi->cur_fthlv = stm32_spi_prepare_fthlv(spi); 877 fthlv = spi->cur_fthlv - 1; 878 879 cfg1_clrb |= SPI_CFG1_FTHLV; 880 cfg1_setb |= (fthlv << SPI_CFG1_FTHLV_SHIFT) & SPI_CFG1_FTHLV; 881 } 882 883 if (spi->cur_speed != transfer->speed_hz) { 884 int mbr; 885 886 /* Update spi->cur_speed with real clock speed */ 887 mbr = stm32_spi_prepare_mbr(spi, transfer->speed_hz); 888 if (mbr < 0) { 889 ret = mbr; 890 goto out; 891 } 892 893 transfer->speed_hz = spi->cur_speed; 894 895 cfg1_clrb |= SPI_CFG1_MBR; 896 cfg1_setb |= ((u32)mbr << SPI_CFG1_MBR_SHIFT) & SPI_CFG1_MBR; 897 } 898 899 if (cfg1_clrb || cfg1_setb) 900 writel_relaxed((readl_relaxed(spi->base + STM32_SPI_CFG1) & 901 ~cfg1_clrb) | cfg1_setb, 902 spi->base + STM32_SPI_CFG1); 903 904 mode = SPI_FULL_DUPLEX; 905 if (spi_dev->mode & SPI_3WIRE) { /* MISO/MOSI signals shared */ 906 /* 907 * SPI_3WIRE and xfer->tx_buf != NULL and xfer->rx_buf != NULL 908 * is forbidden und unvalidated by SPI subsystem so depending 909 * on the valid buffer, we can determine the direction of the 910 * transfer. 911 */ 912 mode = SPI_HALF_DUPLEX; 913 if (!transfer->tx_buf) 914 stm32_spi_clr_bits(spi, STM32_SPI_CR1, SPI_CR1_HDDIR); 915 else if (!transfer->rx_buf) 916 stm32_spi_set_bits(spi, STM32_SPI_CR1, SPI_CR1_HDDIR); 917 } else { 918 if (!transfer->tx_buf) 919 mode = SPI_SIMPLEX_RX; 920 else if (!transfer->rx_buf) 921 mode = SPI_SIMPLEX_TX; 922 } 923 if (spi->cur_comm != mode) { 924 spi->cur_comm = mode; 925 926 cfg2_clrb |= SPI_CFG2_COMM; 927 cfg2_setb |= (mode << SPI_CFG2_COMM_SHIFT) & SPI_CFG2_COMM; 928 } 929 930 cfg2_clrb |= SPI_CFG2_MIDI; 931 if ((transfer->len > 1) && (spi->cur_midi > 0)) { 932 u32 sck_period_ns = DIV_ROUND_UP(SPI_1HZ_NS, spi->cur_speed); 933 u32 midi = min((u32)DIV_ROUND_UP(spi->cur_midi, sck_period_ns), 934 (u32)SPI_CFG2_MIDI >> SPI_CFG2_MIDI_SHIFT); 935 936 dev_dbg(spi->dev, "period=%dns, midi=%d(=%dns)\n", 937 sck_period_ns, midi, midi * sck_period_ns); 938 939 cfg2_setb |= (midi << SPI_CFG2_MIDI_SHIFT) & SPI_CFG2_MIDI; 940 } 941 942 if (cfg2_clrb || cfg2_setb) 943 writel_relaxed((readl_relaxed(spi->base + STM32_SPI_CFG2) & 944 ~cfg2_clrb) | cfg2_setb, 945 spi->base + STM32_SPI_CFG2); 946 947 if (spi->cur_bpw <= 8) 948 nb_words = transfer->len; 949 else if (spi->cur_bpw <= 16) 950 nb_words = DIV_ROUND_UP(transfer->len * 8, 16); 951 else 952 nb_words = DIV_ROUND_UP(transfer->len * 8, 32); 953 nb_words <<= SPI_CR2_TSIZE_SHIFT; 954 955 if (nb_words <= SPI_CR2_TSIZE) { 956 writel_relaxed(nb_words, spi->base + STM32_SPI_CR2); 957 } else { 958 ret = -EMSGSIZE; 959 goto out; 960 } 961 962 spi->cur_xferlen = transfer->len; 963 964 dev_dbg(spi->dev, "transfer communication mode set to %d\n", 965 spi->cur_comm); 966 dev_dbg(spi->dev, 967 "data frame of %d-bit, data packet of %d data frames\n", 968 spi->cur_bpw, spi->cur_fthlv); 969 dev_dbg(spi->dev, "speed set to %dHz\n", spi->cur_speed); 970 dev_dbg(spi->dev, "transfer of %d bytes (%d data frames)\n", 971 spi->cur_xferlen, nb_words); 972 dev_dbg(spi->dev, "dma %s\n", 973 (spi->cur_usedma) ? "enabled" : "disabled"); 974 975 out: 976 spin_unlock_irqrestore(&spi->lock, flags); 977 978 return ret; 979 } 980 981 /** 982 * stm32_spi_transfer_one - transfer a single spi_transfer 983 * 984 * It must return 0 if the transfer is finished or 1 if the transfer is still 985 * in progress. 986 */ 987 static int stm32_spi_transfer_one(struct spi_master *master, 988 struct spi_device *spi_dev, 989 struct spi_transfer *transfer) 990 { 991 struct stm32_spi *spi = spi_master_get_devdata(master); 992 int ret; 993 994 spi->tx_buf = transfer->tx_buf; 995 spi->rx_buf = transfer->rx_buf; 996 spi->tx_len = spi->tx_buf ? transfer->len : 0; 997 spi->rx_len = spi->rx_buf ? transfer->len : 0; 998 999 spi->cur_usedma = (master->can_dma && 1000 stm32_spi_can_dma(master, spi_dev, transfer)); 1001 1002 ret = stm32_spi_transfer_one_setup(spi, spi_dev, transfer); 1003 if (ret) { 1004 dev_err(spi->dev, "SPI transfer setup failed\n"); 1005 return ret; 1006 } 1007 1008 if (spi->cur_usedma) 1009 return stm32_spi_transfer_one_dma(spi, transfer); 1010 else 1011 return stm32_spi_transfer_one_irq(spi); 1012 } 1013 1014 /** 1015 * stm32_spi_unprepare_msg - relax the hardware 1016 * 1017 * Normally, if TSIZE has been configured, we should relax the hardware at the 1018 * reception of the EOT interrupt. But in case of error, EOT will not be 1019 * raised. So the subsystem unprepare_message call allows us to properly 1020 * complete the transfer from an hardware point of view. 1021 */ 1022 static int stm32_spi_unprepare_msg(struct spi_master *master, 1023 struct spi_message *msg) 1024 { 1025 struct stm32_spi *spi = spi_master_get_devdata(master); 1026 1027 stm32_spi_disable(spi); 1028 1029 return 0; 1030 } 1031 1032 /** 1033 * stm32_spi_config - Configure SPI controller as SPI master 1034 */ 1035 static int stm32_spi_config(struct stm32_spi *spi) 1036 { 1037 unsigned long flags; 1038 1039 spin_lock_irqsave(&spi->lock, flags); 1040 1041 /* Ensure I2SMOD bit is kept cleared */ 1042 stm32_spi_clr_bits(spi, STM32_SPI_I2SCFGR, SPI_I2SCFGR_I2SMOD); 1043 1044 /* 1045 * - SS input value high 1046 * - transmitter half duplex direction 1047 * - automatic communication suspend when RX-Fifo is full 1048 */ 1049 stm32_spi_set_bits(spi, STM32_SPI_CR1, SPI_CR1_SSI | 1050 SPI_CR1_HDDIR | 1051 SPI_CR1_MASRX); 1052 1053 /* 1054 * - Set the master mode (default Motorola mode) 1055 * - Consider 1 master/n slaves configuration and 1056 * SS input value is determined by the SSI bit 1057 * - keep control of all associated GPIOs 1058 */ 1059 stm32_spi_set_bits(spi, STM32_SPI_CFG2, SPI_CFG2_MASTER | 1060 SPI_CFG2_SSM | 1061 SPI_CFG2_AFCNTR); 1062 1063 spin_unlock_irqrestore(&spi->lock, flags); 1064 1065 return 0; 1066 } 1067 1068 static const struct of_device_id stm32_spi_of_match[] = { 1069 { .compatible = "st,stm32h7-spi", }, 1070 {}, 1071 }; 1072 MODULE_DEVICE_TABLE(of, stm32_spi_of_match); 1073 1074 static int stm32_spi_probe(struct platform_device *pdev) 1075 { 1076 struct spi_master *master; 1077 struct stm32_spi *spi; 1078 struct resource *res; 1079 int i, ret; 1080 1081 master = spi_alloc_master(&pdev->dev, sizeof(struct stm32_spi)); 1082 if (!master) { 1083 dev_err(&pdev->dev, "spi master allocation failed\n"); 1084 return -ENOMEM; 1085 } 1086 platform_set_drvdata(pdev, master); 1087 1088 spi = spi_master_get_devdata(master); 1089 spi->dev = &pdev->dev; 1090 spi->master = master; 1091 spin_lock_init(&spi->lock); 1092 1093 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 1094 spi->base = devm_ioremap_resource(&pdev->dev, res); 1095 if (IS_ERR(spi->base)) { 1096 ret = PTR_ERR(spi->base); 1097 goto err_master_put; 1098 } 1099 spi->phys_addr = (dma_addr_t)res->start; 1100 1101 spi->irq = platform_get_irq(pdev, 0); 1102 if (spi->irq <= 0) { 1103 dev_err(&pdev->dev, "no irq: %d\n", spi->irq); 1104 ret = -ENOENT; 1105 goto err_master_put; 1106 } 1107 ret = devm_request_threaded_irq(&pdev->dev, spi->irq, NULL, 1108 stm32_spi_irq, IRQF_ONESHOT, 1109 pdev->name, master); 1110 if (ret) { 1111 dev_err(&pdev->dev, "irq%d request failed: %d\n", spi->irq, 1112 ret); 1113 goto err_master_put; 1114 } 1115 1116 spi->clk = devm_clk_get(&pdev->dev, 0); 1117 if (IS_ERR(spi->clk)) { 1118 ret = PTR_ERR(spi->clk); 1119 dev_err(&pdev->dev, "clk get failed: %d\n", ret); 1120 goto err_master_put; 1121 } 1122 1123 ret = clk_prepare_enable(spi->clk); 1124 if (ret) { 1125 dev_err(&pdev->dev, "clk enable failed: %d\n", ret); 1126 goto err_master_put; 1127 } 1128 spi->clk_rate = clk_get_rate(spi->clk); 1129 if (!spi->clk_rate) { 1130 dev_err(&pdev->dev, "clk rate = 0\n"); 1131 ret = -EINVAL; 1132 goto err_master_put; 1133 } 1134 1135 spi->rst = devm_reset_control_get_exclusive(&pdev->dev, NULL); 1136 if (!IS_ERR(spi->rst)) { 1137 reset_control_assert(spi->rst); 1138 udelay(2); 1139 reset_control_deassert(spi->rst); 1140 } 1141 1142 spi->fifo_size = stm32_spi_get_fifo_size(spi); 1143 1144 ret = stm32_spi_config(spi); 1145 if (ret) { 1146 dev_err(&pdev->dev, "controller configuration failed: %d\n", 1147 ret); 1148 goto err_clk_disable; 1149 } 1150 1151 master->dev.of_node = pdev->dev.of_node; 1152 master->auto_runtime_pm = true; 1153 master->bus_num = pdev->id; 1154 master->mode_bits = SPI_MODE_3 | SPI_CS_HIGH | SPI_LSB_FIRST | 1155 SPI_3WIRE | SPI_LOOP; 1156 master->bits_per_word_mask = stm32_spi_get_bpw_mask(spi); 1157 master->max_speed_hz = spi->clk_rate / SPI_MBR_DIV_MIN; 1158 master->min_speed_hz = spi->clk_rate / SPI_MBR_DIV_MAX; 1159 master->setup = stm32_spi_setup; 1160 master->prepare_message = stm32_spi_prepare_msg; 1161 master->transfer_one = stm32_spi_transfer_one; 1162 master->unprepare_message = stm32_spi_unprepare_msg; 1163 1164 spi->dma_tx = dma_request_slave_channel(spi->dev, "tx"); 1165 if (!spi->dma_tx) 1166 dev_warn(&pdev->dev, "failed to request tx dma channel\n"); 1167 else 1168 master->dma_tx = spi->dma_tx; 1169 1170 spi->dma_rx = dma_request_slave_channel(spi->dev, "rx"); 1171 if (!spi->dma_rx) 1172 dev_warn(&pdev->dev, "failed to request rx dma channel\n"); 1173 else 1174 master->dma_rx = spi->dma_rx; 1175 1176 if (spi->dma_tx || spi->dma_rx) 1177 master->can_dma = stm32_spi_can_dma; 1178 1179 pm_runtime_set_active(&pdev->dev); 1180 pm_runtime_enable(&pdev->dev); 1181 1182 ret = devm_spi_register_master(&pdev->dev, master); 1183 if (ret) { 1184 dev_err(&pdev->dev, "spi master registration failed: %d\n", 1185 ret); 1186 goto err_dma_release; 1187 } 1188 1189 if (!master->cs_gpios) { 1190 dev_err(&pdev->dev, "no CS gpios available\n"); 1191 ret = -EINVAL; 1192 goto err_dma_release; 1193 } 1194 1195 for (i = 0; i < master->num_chipselect; i++) { 1196 if (!gpio_is_valid(master->cs_gpios[i])) { 1197 dev_err(&pdev->dev, "%i is not a valid gpio\n", 1198 master->cs_gpios[i]); 1199 ret = -EINVAL; 1200 goto err_dma_release; 1201 } 1202 1203 ret = devm_gpio_request(&pdev->dev, master->cs_gpios[i], 1204 DRIVER_NAME); 1205 if (ret) { 1206 dev_err(&pdev->dev, "can't get CS gpio %i\n", 1207 master->cs_gpios[i]); 1208 goto err_dma_release; 1209 } 1210 } 1211 1212 dev_info(&pdev->dev, "driver initialized\n"); 1213 1214 return 0; 1215 1216 err_dma_release: 1217 if (spi->dma_tx) 1218 dma_release_channel(spi->dma_tx); 1219 if (spi->dma_rx) 1220 dma_release_channel(spi->dma_rx); 1221 1222 pm_runtime_disable(&pdev->dev); 1223 err_clk_disable: 1224 clk_disable_unprepare(spi->clk); 1225 err_master_put: 1226 spi_master_put(master); 1227 1228 return ret; 1229 } 1230 1231 static int stm32_spi_remove(struct platform_device *pdev) 1232 { 1233 struct spi_master *master = platform_get_drvdata(pdev); 1234 struct stm32_spi *spi = spi_master_get_devdata(master); 1235 1236 stm32_spi_disable(spi); 1237 1238 if (master->dma_tx) 1239 dma_release_channel(master->dma_tx); 1240 if (master->dma_rx) 1241 dma_release_channel(master->dma_rx); 1242 1243 clk_disable_unprepare(spi->clk); 1244 1245 pm_runtime_disable(&pdev->dev); 1246 1247 return 0; 1248 } 1249 1250 #ifdef CONFIG_PM 1251 static int stm32_spi_runtime_suspend(struct device *dev) 1252 { 1253 struct spi_master *master = dev_get_drvdata(dev); 1254 struct stm32_spi *spi = spi_master_get_devdata(master); 1255 1256 clk_disable_unprepare(spi->clk); 1257 1258 return 0; 1259 } 1260 1261 static int stm32_spi_runtime_resume(struct device *dev) 1262 { 1263 struct spi_master *master = dev_get_drvdata(dev); 1264 struct stm32_spi *spi = spi_master_get_devdata(master); 1265 1266 return clk_prepare_enable(spi->clk); 1267 } 1268 #endif 1269 1270 #ifdef CONFIG_PM_SLEEP 1271 static int stm32_spi_suspend(struct device *dev) 1272 { 1273 struct spi_master *master = dev_get_drvdata(dev); 1274 int ret; 1275 1276 ret = spi_master_suspend(master); 1277 if (ret) 1278 return ret; 1279 1280 return pm_runtime_force_suspend(dev); 1281 } 1282 1283 static int stm32_spi_resume(struct device *dev) 1284 { 1285 struct spi_master *master = dev_get_drvdata(dev); 1286 struct stm32_spi *spi = spi_master_get_devdata(master); 1287 int ret; 1288 1289 ret = pm_runtime_force_resume(dev); 1290 if (ret) 1291 return ret; 1292 1293 ret = spi_master_resume(master); 1294 if (ret) 1295 clk_disable_unprepare(spi->clk); 1296 1297 return ret; 1298 } 1299 #endif 1300 1301 static const struct dev_pm_ops stm32_spi_pm_ops = { 1302 SET_SYSTEM_SLEEP_PM_OPS(stm32_spi_suspend, stm32_spi_resume) 1303 SET_RUNTIME_PM_OPS(stm32_spi_runtime_suspend, 1304 stm32_spi_runtime_resume, NULL) 1305 }; 1306 1307 static struct platform_driver stm32_spi_driver = { 1308 .probe = stm32_spi_probe, 1309 .remove = stm32_spi_remove, 1310 .driver = { 1311 .name = DRIVER_NAME, 1312 .pm = &stm32_spi_pm_ops, 1313 .of_match_table = stm32_spi_of_match, 1314 }, 1315 }; 1316 1317 module_platform_driver(stm32_spi_driver); 1318 1319 MODULE_ALIAS("platform:" DRIVER_NAME); 1320 MODULE_DESCRIPTION("STMicroelectronics STM32 SPI Controller driver"); 1321 MODULE_AUTHOR("Amelie Delaunay <amelie.delaunay@st.com>"); 1322 MODULE_LICENSE("GPL v2"); 1323