1 /* 2 * NXP SC18IS602/603 SPI driver 3 * 4 * Copyright (C) Guenter Roeck <linux@roeck-us.net> 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License as published by 8 * the Free Software Foundation; either version 2 of the License, or 9 * (at your option) any later version. 10 * 11 * This program is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 * GNU General Public License for more details. 15 * 16 * You should have received a copy of the GNU General Public License 17 * along with this program; if not, write to the Free Software 18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 19 */ 20 21 #include <linux/kernel.h> 22 #include <linux/err.h> 23 #include <linux/module.h> 24 #include <linux/spi/spi.h> 25 #include <linux/i2c.h> 26 #include <linux/delay.h> 27 #include <linux/pm_runtime.h> 28 #include <linux/of.h> 29 #include <linux/platform_data/sc18is602.h> 30 31 enum chips { sc18is602, sc18is602b, sc18is603 }; 32 33 #define SC18IS602_BUFSIZ 200 34 #define SC18IS602_CLOCK 7372000 35 36 #define SC18IS602_MODE_CPHA BIT(2) 37 #define SC18IS602_MODE_CPOL BIT(3) 38 #define SC18IS602_MODE_LSB_FIRST BIT(5) 39 #define SC18IS602_MODE_CLOCK_DIV_4 0x0 40 #define SC18IS602_MODE_CLOCK_DIV_16 0x1 41 #define SC18IS602_MODE_CLOCK_DIV_64 0x2 42 #define SC18IS602_MODE_CLOCK_DIV_128 0x3 43 44 struct sc18is602 { 45 struct spi_master *master; 46 struct device *dev; 47 u8 ctrl; 48 u32 freq; 49 u32 speed; 50 51 /* I2C data */ 52 struct i2c_client *client; 53 enum chips id; 54 u8 buffer[SC18IS602_BUFSIZ + 1]; 55 int tlen; /* Data queued for tx in buffer */ 56 int rindex; /* Receive data index in buffer */ 57 }; 58 59 static int sc18is602_wait_ready(struct sc18is602 *hw, int len) 60 { 61 int i, err; 62 int usecs = 1000000 * len / hw->speed + 1; 63 u8 dummy[1]; 64 65 for (i = 0; i < 10; i++) { 66 err = i2c_master_recv(hw->client, dummy, 1); 67 if (err >= 0) 68 return 0; 69 usleep_range(usecs, usecs * 2); 70 } 71 return -ETIMEDOUT; 72 } 73 74 static int sc18is602_txrx(struct sc18is602 *hw, struct spi_message *msg, 75 struct spi_transfer *t, bool do_transfer) 76 { 77 unsigned int len = t->len; 78 int ret; 79 80 if (hw->tlen == 0) { 81 /* First byte (I2C command) is chip select */ 82 hw->buffer[0] = 1 << msg->spi->chip_select; 83 hw->tlen = 1; 84 hw->rindex = 0; 85 } 86 /* 87 * We can not immediately send data to the chip, since each I2C message 88 * resembles a full SPI message (from CS active to CS inactive). 89 * Enqueue messages up to the first read or until do_transfer is true. 90 */ 91 if (t->tx_buf) { 92 memcpy(&hw->buffer[hw->tlen], t->tx_buf, len); 93 hw->tlen += len; 94 if (t->rx_buf) 95 do_transfer = true; 96 else 97 hw->rindex = hw->tlen - 1; 98 } else if (t->rx_buf) { 99 /* 100 * For receive-only transfers we still need to perform a dummy 101 * write to receive data from the SPI chip. 102 * Read data starts at the end of transmit data (minus 1 to 103 * account for CS). 104 */ 105 hw->rindex = hw->tlen - 1; 106 memset(&hw->buffer[hw->tlen], 0, len); 107 hw->tlen += len; 108 do_transfer = true; 109 } 110 111 if (do_transfer && hw->tlen > 1) { 112 ret = sc18is602_wait_ready(hw, SC18IS602_BUFSIZ); 113 if (ret < 0) 114 return ret; 115 ret = i2c_master_send(hw->client, hw->buffer, hw->tlen); 116 if (ret < 0) 117 return ret; 118 if (ret != hw->tlen) 119 return -EIO; 120 121 if (t->rx_buf) { 122 int rlen = hw->rindex + len; 123 124 ret = sc18is602_wait_ready(hw, hw->tlen); 125 if (ret < 0) 126 return ret; 127 ret = i2c_master_recv(hw->client, hw->buffer, rlen); 128 if (ret < 0) 129 return ret; 130 if (ret != rlen) 131 return -EIO; 132 memcpy(t->rx_buf, &hw->buffer[hw->rindex], len); 133 } 134 hw->tlen = 0; 135 } 136 return len; 137 } 138 139 static int sc18is602_setup_transfer(struct sc18is602 *hw, u32 hz, u8 mode) 140 { 141 u8 ctrl = 0; 142 int ret; 143 144 if (mode & SPI_CPHA) 145 ctrl |= SC18IS602_MODE_CPHA; 146 if (mode & SPI_CPOL) 147 ctrl |= SC18IS602_MODE_CPOL; 148 if (mode & SPI_LSB_FIRST) 149 ctrl |= SC18IS602_MODE_LSB_FIRST; 150 151 /* Find the closest clock speed */ 152 if (hz >= hw->freq / 4) { 153 ctrl |= SC18IS602_MODE_CLOCK_DIV_4; 154 hw->speed = hw->freq / 4; 155 } else if (hz >= hw->freq / 16) { 156 ctrl |= SC18IS602_MODE_CLOCK_DIV_16; 157 hw->speed = hw->freq / 16; 158 } else if (hz >= hw->freq / 64) { 159 ctrl |= SC18IS602_MODE_CLOCK_DIV_64; 160 hw->speed = hw->freq / 64; 161 } else { 162 ctrl |= SC18IS602_MODE_CLOCK_DIV_128; 163 hw->speed = hw->freq / 128; 164 } 165 166 /* 167 * Don't do anything if the control value did not change. The initial 168 * value of 0xff for hw->ctrl ensures that the correct mode will be set 169 * with the first call to this function. 170 */ 171 if (ctrl == hw->ctrl) 172 return 0; 173 174 ret = i2c_smbus_write_byte_data(hw->client, 0xf0, ctrl); 175 if (ret < 0) 176 return ret; 177 178 hw->ctrl = ctrl; 179 180 return 0; 181 } 182 183 static int sc18is602_check_transfer(struct spi_device *spi, 184 struct spi_transfer *t, int tlen) 185 { 186 int bpw; 187 uint32_t hz; 188 189 if (t && t->len + tlen > SC18IS602_BUFSIZ) 190 return -EINVAL; 191 192 bpw = spi->bits_per_word; 193 if (t && t->bits_per_word) 194 bpw = t->bits_per_word; 195 if (bpw != 8) 196 return -EINVAL; 197 198 hz = spi->max_speed_hz; 199 if (t && t->speed_hz) 200 hz = t->speed_hz; 201 if (hz == 0) 202 return -EINVAL; 203 204 return 0; 205 } 206 207 static int sc18is602_transfer_one(struct spi_master *master, 208 struct spi_message *m) 209 { 210 struct sc18is602 *hw = spi_master_get_devdata(master); 211 struct spi_device *spi = m->spi; 212 struct spi_transfer *t; 213 int status = 0; 214 215 /* SC18IS602 does not support CS2 */ 216 if (hw->id == sc18is602 && spi->chip_select == 2) { 217 status = -ENXIO; 218 goto error; 219 } 220 221 hw->tlen = 0; 222 list_for_each_entry(t, &m->transfers, transfer_list) { 223 u32 hz = t->speed_hz ? : spi->max_speed_hz; 224 bool do_transfer; 225 226 status = sc18is602_check_transfer(spi, t, hw->tlen); 227 if (status < 0) 228 break; 229 230 status = sc18is602_setup_transfer(hw, hz, spi->mode); 231 if (status < 0) 232 break; 233 234 do_transfer = t->cs_change || list_is_last(&t->transfer_list, 235 &m->transfers); 236 237 if (t->len) { 238 status = sc18is602_txrx(hw, m, t, do_transfer); 239 if (status < 0) 240 break; 241 m->actual_length += status; 242 } 243 status = 0; 244 245 if (t->delay_usecs) 246 udelay(t->delay_usecs); 247 } 248 error: 249 m->status = status; 250 spi_finalize_current_message(master); 251 252 return status; 253 } 254 255 static int sc18is602_setup(struct spi_device *spi) 256 { 257 if (!spi->bits_per_word) 258 spi->bits_per_word = 8; 259 260 if (spi->mode & ~(SPI_CPHA | SPI_CPOL | SPI_LSB_FIRST)) 261 return -EINVAL; 262 263 return sc18is602_check_transfer(spi, NULL, 0); 264 } 265 266 static int sc18is602_probe(struct i2c_client *client, 267 const struct i2c_device_id *id) 268 { 269 struct device *dev = &client->dev; 270 struct device_node *np = dev->of_node; 271 struct sc18is602_platform_data *pdata = dev_get_platdata(dev); 272 struct sc18is602 *hw; 273 struct spi_master *master; 274 int error; 275 276 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C | 277 I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) 278 return -EINVAL; 279 280 master = spi_alloc_master(dev, sizeof(struct sc18is602)); 281 if (!master) 282 return -ENOMEM; 283 284 hw = spi_master_get_devdata(master); 285 i2c_set_clientdata(client, hw); 286 287 hw->master = master; 288 hw->client = client; 289 hw->dev = dev; 290 hw->ctrl = 0xff; 291 292 hw->id = id->driver_data; 293 294 switch (hw->id) { 295 case sc18is602: 296 case sc18is602b: 297 master->num_chipselect = 4; 298 hw->freq = SC18IS602_CLOCK; 299 break; 300 case sc18is603: 301 master->num_chipselect = 2; 302 if (pdata) { 303 hw->freq = pdata->clock_frequency; 304 } else { 305 const __be32 *val; 306 int len; 307 308 val = of_get_property(np, "clock-frequency", &len); 309 if (val && len >= sizeof(__be32)) 310 hw->freq = be32_to_cpup(val); 311 } 312 if (!hw->freq) 313 hw->freq = SC18IS602_CLOCK; 314 break; 315 } 316 master->bus_num = client->adapter->nr; 317 master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_LSB_FIRST; 318 master->setup = sc18is602_setup; 319 master->transfer_one_message = sc18is602_transfer_one; 320 master->dev.of_node = np; 321 322 error = spi_register_master(master); 323 if (error) 324 goto error_reg; 325 326 return 0; 327 328 error_reg: 329 spi_master_put(master); 330 return error; 331 } 332 333 static int sc18is602_remove(struct i2c_client *client) 334 { 335 struct sc18is602 *hw = i2c_get_clientdata(client); 336 struct spi_master *master = hw->master; 337 338 spi_unregister_master(master); 339 340 return 0; 341 } 342 343 static const struct i2c_device_id sc18is602_id[] = { 344 { "sc18is602", sc18is602 }, 345 { "sc18is602b", sc18is602b }, 346 { "sc18is603", sc18is603 }, 347 { } 348 }; 349 MODULE_DEVICE_TABLE(i2c, sc18is602_id); 350 351 static struct i2c_driver sc18is602_driver = { 352 .driver = { 353 .name = "sc18is602", 354 }, 355 .probe = sc18is602_probe, 356 .remove = sc18is602_remove, 357 .id_table = sc18is602_id, 358 }; 359 360 module_i2c_driver(sc18is602_driver); 361 362 MODULE_DESCRIPTION("SC18IC602/603 SPI Master Driver"); 363 MODULE_AUTHOR("Guenter Roeck"); 364 MODULE_LICENSE("GPL"); 365