1 /* 2 * NXP SC18IS602/603 SPI driver 3 * 4 * Copyright (C) Guenter Roeck <linux@roeck-us.net> 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License as published by 8 * the Free Software Foundation; either version 2 of the License, or 9 * (at your option) any later version. 10 * 11 * This program is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 * GNU General Public License for more details. 15 */ 16 17 #include <linux/kernel.h> 18 #include <linux/err.h> 19 #include <linux/module.h> 20 #include <linux/spi/spi.h> 21 #include <linux/i2c.h> 22 #include <linux/delay.h> 23 #include <linux/pm_runtime.h> 24 #include <linux/of_device.h> 25 #include <linux/of.h> 26 #include <linux/platform_data/sc18is602.h> 27 #include <linux/gpio/consumer.h> 28 29 enum chips { sc18is602, sc18is602b, sc18is603 }; 30 31 #define SC18IS602_BUFSIZ 200 32 #define SC18IS602_CLOCK 7372000 33 34 #define SC18IS602_MODE_CPHA BIT(2) 35 #define SC18IS602_MODE_CPOL BIT(3) 36 #define SC18IS602_MODE_LSB_FIRST BIT(5) 37 #define SC18IS602_MODE_CLOCK_DIV_4 0x0 38 #define SC18IS602_MODE_CLOCK_DIV_16 0x1 39 #define SC18IS602_MODE_CLOCK_DIV_64 0x2 40 #define SC18IS602_MODE_CLOCK_DIV_128 0x3 41 42 struct sc18is602 { 43 struct spi_master *master; 44 struct device *dev; 45 u8 ctrl; 46 u32 freq; 47 u32 speed; 48 49 /* I2C data */ 50 struct i2c_client *client; 51 enum chips id; 52 u8 buffer[SC18IS602_BUFSIZ + 1]; 53 int tlen; /* Data queued for tx in buffer */ 54 int rindex; /* Receive data index in buffer */ 55 56 struct gpio_desc *reset; 57 }; 58 59 static int sc18is602_wait_ready(struct sc18is602 *hw, int len) 60 { 61 int i, err; 62 int usecs = 1000000 * len / hw->speed + 1; 63 u8 dummy[1]; 64 65 for (i = 0; i < 10; i++) { 66 err = i2c_master_recv(hw->client, dummy, 1); 67 if (err >= 0) 68 return 0; 69 usleep_range(usecs, usecs * 2); 70 } 71 return -ETIMEDOUT; 72 } 73 74 static int sc18is602_txrx(struct sc18is602 *hw, struct spi_message *msg, 75 struct spi_transfer *t, bool do_transfer) 76 { 77 unsigned int len = t->len; 78 int ret; 79 80 if (hw->tlen == 0) { 81 /* First byte (I2C command) is chip select */ 82 hw->buffer[0] = 1 << msg->spi->chip_select; 83 hw->tlen = 1; 84 hw->rindex = 0; 85 } 86 /* 87 * We can not immediately send data to the chip, since each I2C message 88 * resembles a full SPI message (from CS active to CS inactive). 89 * Enqueue messages up to the first read or until do_transfer is true. 90 */ 91 if (t->tx_buf) { 92 memcpy(&hw->buffer[hw->tlen], t->tx_buf, len); 93 hw->tlen += len; 94 if (t->rx_buf) 95 do_transfer = true; 96 else 97 hw->rindex = hw->tlen - 1; 98 } else if (t->rx_buf) { 99 /* 100 * For receive-only transfers we still need to perform a dummy 101 * write to receive data from the SPI chip. 102 * Read data starts at the end of transmit data (minus 1 to 103 * account for CS). 104 */ 105 hw->rindex = hw->tlen - 1; 106 memset(&hw->buffer[hw->tlen], 0, len); 107 hw->tlen += len; 108 do_transfer = true; 109 } 110 111 if (do_transfer && hw->tlen > 1) { 112 ret = sc18is602_wait_ready(hw, SC18IS602_BUFSIZ); 113 if (ret < 0) 114 return ret; 115 ret = i2c_master_send(hw->client, hw->buffer, hw->tlen); 116 if (ret < 0) 117 return ret; 118 if (ret != hw->tlen) 119 return -EIO; 120 121 if (t->rx_buf) { 122 int rlen = hw->rindex + len; 123 124 ret = sc18is602_wait_ready(hw, hw->tlen); 125 if (ret < 0) 126 return ret; 127 ret = i2c_master_recv(hw->client, hw->buffer, rlen); 128 if (ret < 0) 129 return ret; 130 if (ret != rlen) 131 return -EIO; 132 memcpy(t->rx_buf, &hw->buffer[hw->rindex], len); 133 } 134 hw->tlen = 0; 135 } 136 return len; 137 } 138 139 static int sc18is602_setup_transfer(struct sc18is602 *hw, u32 hz, u8 mode) 140 { 141 u8 ctrl = 0; 142 int ret; 143 144 if (mode & SPI_CPHA) 145 ctrl |= SC18IS602_MODE_CPHA; 146 if (mode & SPI_CPOL) 147 ctrl |= SC18IS602_MODE_CPOL; 148 if (mode & SPI_LSB_FIRST) 149 ctrl |= SC18IS602_MODE_LSB_FIRST; 150 151 /* Find the closest clock speed */ 152 if (hz >= hw->freq / 4) { 153 ctrl |= SC18IS602_MODE_CLOCK_DIV_4; 154 hw->speed = hw->freq / 4; 155 } else if (hz >= hw->freq / 16) { 156 ctrl |= SC18IS602_MODE_CLOCK_DIV_16; 157 hw->speed = hw->freq / 16; 158 } else if (hz >= hw->freq / 64) { 159 ctrl |= SC18IS602_MODE_CLOCK_DIV_64; 160 hw->speed = hw->freq / 64; 161 } else { 162 ctrl |= SC18IS602_MODE_CLOCK_DIV_128; 163 hw->speed = hw->freq / 128; 164 } 165 166 /* 167 * Don't do anything if the control value did not change. The initial 168 * value of 0xff for hw->ctrl ensures that the correct mode will be set 169 * with the first call to this function. 170 */ 171 if (ctrl == hw->ctrl) 172 return 0; 173 174 ret = i2c_smbus_write_byte_data(hw->client, 0xf0, ctrl); 175 if (ret < 0) 176 return ret; 177 178 hw->ctrl = ctrl; 179 180 return 0; 181 } 182 183 static int sc18is602_check_transfer(struct spi_device *spi, 184 struct spi_transfer *t, int tlen) 185 { 186 if (t && t->len + tlen > SC18IS602_BUFSIZ) 187 return -EINVAL; 188 189 return 0; 190 } 191 192 static int sc18is602_transfer_one(struct spi_master *master, 193 struct spi_message *m) 194 { 195 struct sc18is602 *hw = spi_master_get_devdata(master); 196 struct spi_device *spi = m->spi; 197 struct spi_transfer *t; 198 int status = 0; 199 200 hw->tlen = 0; 201 list_for_each_entry(t, &m->transfers, transfer_list) { 202 bool do_transfer; 203 204 status = sc18is602_check_transfer(spi, t, hw->tlen); 205 if (status < 0) 206 break; 207 208 status = sc18is602_setup_transfer(hw, t->speed_hz, spi->mode); 209 if (status < 0) 210 break; 211 212 do_transfer = t->cs_change || list_is_last(&t->transfer_list, 213 &m->transfers); 214 215 if (t->len) { 216 status = sc18is602_txrx(hw, m, t, do_transfer); 217 if (status < 0) 218 break; 219 m->actual_length += status; 220 } 221 status = 0; 222 223 if (t->delay_usecs) 224 udelay(t->delay_usecs); 225 } 226 m->status = status; 227 spi_finalize_current_message(master); 228 229 return status; 230 } 231 232 static int sc18is602_setup(struct spi_device *spi) 233 { 234 struct sc18is602 *hw = spi_master_get_devdata(spi->master); 235 236 /* SC18IS602 does not support CS2 */ 237 if (hw->id == sc18is602 && spi->chip_select == 2) 238 return -ENXIO; 239 240 return 0; 241 } 242 243 static int sc18is602_probe(struct i2c_client *client, 244 const struct i2c_device_id *id) 245 { 246 struct device *dev = &client->dev; 247 struct device_node *np = dev->of_node; 248 struct sc18is602_platform_data *pdata = dev_get_platdata(dev); 249 struct sc18is602 *hw; 250 struct spi_master *master; 251 int error; 252 253 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C | 254 I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) 255 return -EINVAL; 256 257 master = spi_alloc_master(dev, sizeof(struct sc18is602)); 258 if (!master) 259 return -ENOMEM; 260 261 hw = spi_master_get_devdata(master); 262 i2c_set_clientdata(client, hw); 263 264 /* assert reset and then release */ 265 hw->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); 266 if (IS_ERR(hw->reset)) 267 return PTR_ERR(hw->reset); 268 gpiod_set_value_cansleep(hw->reset, 0); 269 270 hw->master = master; 271 hw->client = client; 272 hw->dev = dev; 273 hw->ctrl = 0xff; 274 275 if (client->dev.of_node) 276 hw->id = (enum chips)of_device_get_match_data(&client->dev); 277 else 278 hw->id = id->driver_data; 279 280 switch (hw->id) { 281 case sc18is602: 282 case sc18is602b: 283 master->num_chipselect = 4; 284 hw->freq = SC18IS602_CLOCK; 285 break; 286 case sc18is603: 287 master->num_chipselect = 2; 288 if (pdata) { 289 hw->freq = pdata->clock_frequency; 290 } else { 291 const __be32 *val; 292 int len; 293 294 val = of_get_property(np, "clock-frequency", &len); 295 if (val && len >= sizeof(__be32)) 296 hw->freq = be32_to_cpup(val); 297 } 298 if (!hw->freq) 299 hw->freq = SC18IS602_CLOCK; 300 break; 301 } 302 master->bus_num = np ? -1 : client->adapter->nr; 303 master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_LSB_FIRST; 304 master->bits_per_word_mask = SPI_BPW_MASK(8); 305 master->setup = sc18is602_setup; 306 master->transfer_one_message = sc18is602_transfer_one; 307 master->dev.of_node = np; 308 master->min_speed_hz = hw->freq / 128; 309 master->max_speed_hz = hw->freq / 4; 310 311 error = devm_spi_register_master(dev, master); 312 if (error) 313 goto error_reg; 314 315 return 0; 316 317 error_reg: 318 spi_master_put(master); 319 return error; 320 } 321 322 static const struct i2c_device_id sc18is602_id[] = { 323 { "sc18is602", sc18is602 }, 324 { "sc18is602b", sc18is602b }, 325 { "sc18is603", sc18is603 }, 326 { } 327 }; 328 MODULE_DEVICE_TABLE(i2c, sc18is602_id); 329 330 static const struct of_device_id sc18is602_of_match[] = { 331 { 332 .compatible = "nxp,sc18is602", 333 .data = (void *)sc18is602 334 }, 335 { 336 .compatible = "nxp,sc18is602b", 337 .data = (void *)sc18is602b 338 }, 339 { 340 .compatible = "nxp,sc18is603", 341 .data = (void *)sc18is603 342 }, 343 { }, 344 }; 345 MODULE_DEVICE_TABLE(of, sc18is602_of_match); 346 347 static struct i2c_driver sc18is602_driver = { 348 .driver = { 349 .name = "sc18is602", 350 .of_match_table = of_match_ptr(sc18is602_of_match), 351 }, 352 .probe = sc18is602_probe, 353 .id_table = sc18is602_id, 354 }; 355 356 module_i2c_driver(sc18is602_driver); 357 358 MODULE_DESCRIPTION("SC18IC602/603 SPI Master Driver"); 359 MODULE_AUTHOR("Guenter Roeck"); 360 MODULE_LICENSE("GPL"); 361