1 /* 2 * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs 3 * Copyright (C) 2013, Intel Corporation 4 * 5 * This program is free software; you can redistribute it and/or modify 6 * it under the terms of the GNU General Public License as published by 7 * the Free Software Foundation; either version 2 of the License, or 8 * (at your option) any later version. 9 * 10 * This program is distributed in the hope that it will be useful, 11 * but WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 * GNU General Public License for more details. 14 * 15 * You should have received a copy of the GNU General Public License 16 * along with this program; if not, write to the Free Software 17 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 18 */ 19 20 #include <linux/init.h> 21 #include <linux/module.h> 22 #include <linux/device.h> 23 #include <linux/ioport.h> 24 #include <linux/errno.h> 25 #include <linux/err.h> 26 #include <linux/interrupt.h> 27 #include <linux/platform_device.h> 28 #include <linux/spi/pxa2xx_spi.h> 29 #include <linux/spi/spi.h> 30 #include <linux/workqueue.h> 31 #include <linux/delay.h> 32 #include <linux/gpio.h> 33 #include <linux/slab.h> 34 #include <linux/clk.h> 35 #include <linux/pm_runtime.h> 36 #include <linux/acpi.h> 37 38 #include <asm/io.h> 39 #include <asm/irq.h> 40 #include <asm/delay.h> 41 42 #include "spi-pxa2xx.h" 43 44 MODULE_AUTHOR("Stephen Street"); 45 MODULE_DESCRIPTION("PXA2xx SSP SPI Controller"); 46 MODULE_LICENSE("GPL"); 47 MODULE_ALIAS("platform:pxa2xx-spi"); 48 49 #define MAX_BUSES 3 50 51 #define TIMOUT_DFLT 1000 52 53 /* 54 * for testing SSCR1 changes that require SSP restart, basically 55 * everything except the service and interrupt enables, the pxa270 developer 56 * manual says only SSCR1_SCFR, SSCR1_SPH, SSCR1_SPO need to be in this 57 * list, but the PXA255 dev man says all bits without really meaning the 58 * service and interrupt enables 59 */ 60 #define SSCR1_CHANGE_MASK (SSCR1_TTELP | SSCR1_TTE | SSCR1_SCFR \ 61 | SSCR1_ECRA | SSCR1_ECRB | SSCR1_SCLKDIR \ 62 | SSCR1_SFRMDIR | SSCR1_RWOT | SSCR1_TRAIL \ 63 | SSCR1_IFS | SSCR1_STRF | SSCR1_EFWR \ 64 | SSCR1_RFT | SSCR1_TFT | SSCR1_MWDS \ 65 | SSCR1_SPH | SSCR1_SPO | SSCR1_LBM) 66 67 #define LPSS_RX_THRESH_DFLT 64 68 #define LPSS_TX_LOTHRESH_DFLT 160 69 #define LPSS_TX_HITHRESH_DFLT 224 70 71 /* Offset from drv_data->lpss_base */ 72 #define GENERAL_REG 0x08 73 #define GENERAL_REG_RXTO_HOLDOFF_DISABLE BIT(24) 74 #define SSP_REG 0x0c 75 #define SPI_CS_CONTROL 0x18 76 #define SPI_CS_CONTROL_SW_MODE BIT(0) 77 #define SPI_CS_CONTROL_CS_HIGH BIT(1) 78 79 static bool is_lpss_ssp(const struct driver_data *drv_data) 80 { 81 return drv_data->ssp_type == LPSS_SSP; 82 } 83 84 /* 85 * Read and write LPSS SSP private registers. Caller must first check that 86 * is_lpss_ssp() returns true before these can be called. 87 */ 88 static u32 __lpss_ssp_read_priv(struct driver_data *drv_data, unsigned offset) 89 { 90 WARN_ON(!drv_data->lpss_base); 91 return readl(drv_data->lpss_base + offset); 92 } 93 94 static void __lpss_ssp_write_priv(struct driver_data *drv_data, 95 unsigned offset, u32 value) 96 { 97 WARN_ON(!drv_data->lpss_base); 98 writel(value, drv_data->lpss_base + offset); 99 } 100 101 /* 102 * lpss_ssp_setup - perform LPSS SSP specific setup 103 * @drv_data: pointer to the driver private data 104 * 105 * Perform LPSS SSP specific setup. This function must be called first if 106 * one is going to use LPSS SSP private registers. 107 */ 108 static void lpss_ssp_setup(struct driver_data *drv_data) 109 { 110 unsigned offset = 0x400; 111 u32 value, orig; 112 113 if (!is_lpss_ssp(drv_data)) 114 return; 115 116 /* 117 * Perform auto-detection of the LPSS SSP private registers. They 118 * can be either at 1k or 2k offset from the base address. 119 */ 120 orig = readl(drv_data->ioaddr + offset + SPI_CS_CONTROL); 121 122 value = orig | SPI_CS_CONTROL_SW_MODE; 123 writel(value, drv_data->ioaddr + offset + SPI_CS_CONTROL); 124 value = readl(drv_data->ioaddr + offset + SPI_CS_CONTROL); 125 if (value != (orig | SPI_CS_CONTROL_SW_MODE)) { 126 offset = 0x800; 127 goto detection_done; 128 } 129 130 value &= ~SPI_CS_CONTROL_SW_MODE; 131 writel(value, drv_data->ioaddr + offset + SPI_CS_CONTROL); 132 value = readl(drv_data->ioaddr + offset + SPI_CS_CONTROL); 133 if (value != orig) { 134 offset = 0x800; 135 goto detection_done; 136 } 137 138 detection_done: 139 /* Now set the LPSS base */ 140 drv_data->lpss_base = drv_data->ioaddr + offset; 141 142 /* Enable software chip select control */ 143 value = SPI_CS_CONTROL_SW_MODE | SPI_CS_CONTROL_CS_HIGH; 144 __lpss_ssp_write_priv(drv_data, SPI_CS_CONTROL, value); 145 146 /* Enable multiblock DMA transfers */ 147 if (drv_data->master_info->enable_dma) { 148 __lpss_ssp_write_priv(drv_data, SSP_REG, 1); 149 150 value = __lpss_ssp_read_priv(drv_data, GENERAL_REG); 151 value |= GENERAL_REG_RXTO_HOLDOFF_DISABLE; 152 __lpss_ssp_write_priv(drv_data, GENERAL_REG, value); 153 } 154 } 155 156 static void lpss_ssp_cs_control(struct driver_data *drv_data, bool enable) 157 { 158 u32 value; 159 160 if (!is_lpss_ssp(drv_data)) 161 return; 162 163 value = __lpss_ssp_read_priv(drv_data, SPI_CS_CONTROL); 164 if (enable) 165 value &= ~SPI_CS_CONTROL_CS_HIGH; 166 else 167 value |= SPI_CS_CONTROL_CS_HIGH; 168 __lpss_ssp_write_priv(drv_data, SPI_CS_CONTROL, value); 169 } 170 171 static void cs_assert(struct driver_data *drv_data) 172 { 173 struct chip_data *chip = drv_data->cur_chip; 174 175 if (drv_data->ssp_type == CE4100_SSP) { 176 write_SSSR(drv_data->cur_chip->frm, drv_data->ioaddr); 177 return; 178 } 179 180 if (chip->cs_control) { 181 chip->cs_control(PXA2XX_CS_ASSERT); 182 return; 183 } 184 185 if (gpio_is_valid(chip->gpio_cs)) { 186 gpio_set_value(chip->gpio_cs, chip->gpio_cs_inverted); 187 return; 188 } 189 190 lpss_ssp_cs_control(drv_data, true); 191 } 192 193 static void cs_deassert(struct driver_data *drv_data) 194 { 195 struct chip_data *chip = drv_data->cur_chip; 196 197 if (drv_data->ssp_type == CE4100_SSP) 198 return; 199 200 if (chip->cs_control) { 201 chip->cs_control(PXA2XX_CS_DEASSERT); 202 return; 203 } 204 205 if (gpio_is_valid(chip->gpio_cs)) { 206 gpio_set_value(chip->gpio_cs, !chip->gpio_cs_inverted); 207 return; 208 } 209 210 lpss_ssp_cs_control(drv_data, false); 211 } 212 213 int pxa2xx_spi_flush(struct driver_data *drv_data) 214 { 215 unsigned long limit = loops_per_jiffy << 1; 216 217 void __iomem *reg = drv_data->ioaddr; 218 219 do { 220 while (read_SSSR(reg) & SSSR_RNE) { 221 read_SSDR(reg); 222 } 223 } while ((read_SSSR(reg) & SSSR_BSY) && --limit); 224 write_SSSR_CS(drv_data, SSSR_ROR); 225 226 return limit; 227 } 228 229 static int null_writer(struct driver_data *drv_data) 230 { 231 void __iomem *reg = drv_data->ioaddr; 232 u8 n_bytes = drv_data->n_bytes; 233 234 if (((read_SSSR(reg) & SSSR_TFL_MASK) == SSSR_TFL_MASK) 235 || (drv_data->tx == drv_data->tx_end)) 236 return 0; 237 238 write_SSDR(0, reg); 239 drv_data->tx += n_bytes; 240 241 return 1; 242 } 243 244 static int null_reader(struct driver_data *drv_data) 245 { 246 void __iomem *reg = drv_data->ioaddr; 247 u8 n_bytes = drv_data->n_bytes; 248 249 while ((read_SSSR(reg) & SSSR_RNE) 250 && (drv_data->rx < drv_data->rx_end)) { 251 read_SSDR(reg); 252 drv_data->rx += n_bytes; 253 } 254 255 return drv_data->rx == drv_data->rx_end; 256 } 257 258 static int u8_writer(struct driver_data *drv_data) 259 { 260 void __iomem *reg = drv_data->ioaddr; 261 262 if (((read_SSSR(reg) & SSSR_TFL_MASK) == SSSR_TFL_MASK) 263 || (drv_data->tx == drv_data->tx_end)) 264 return 0; 265 266 write_SSDR(*(u8 *)(drv_data->tx), reg); 267 ++drv_data->tx; 268 269 return 1; 270 } 271 272 static int u8_reader(struct driver_data *drv_data) 273 { 274 void __iomem *reg = drv_data->ioaddr; 275 276 while ((read_SSSR(reg) & SSSR_RNE) 277 && (drv_data->rx < drv_data->rx_end)) { 278 *(u8 *)(drv_data->rx) = read_SSDR(reg); 279 ++drv_data->rx; 280 } 281 282 return drv_data->rx == drv_data->rx_end; 283 } 284 285 static int u16_writer(struct driver_data *drv_data) 286 { 287 void __iomem *reg = drv_data->ioaddr; 288 289 if (((read_SSSR(reg) & SSSR_TFL_MASK) == SSSR_TFL_MASK) 290 || (drv_data->tx == drv_data->tx_end)) 291 return 0; 292 293 write_SSDR(*(u16 *)(drv_data->tx), reg); 294 drv_data->tx += 2; 295 296 return 1; 297 } 298 299 static int u16_reader(struct driver_data *drv_data) 300 { 301 void __iomem *reg = drv_data->ioaddr; 302 303 while ((read_SSSR(reg) & SSSR_RNE) 304 && (drv_data->rx < drv_data->rx_end)) { 305 *(u16 *)(drv_data->rx) = read_SSDR(reg); 306 drv_data->rx += 2; 307 } 308 309 return drv_data->rx == drv_data->rx_end; 310 } 311 312 static int u32_writer(struct driver_data *drv_data) 313 { 314 void __iomem *reg = drv_data->ioaddr; 315 316 if (((read_SSSR(reg) & SSSR_TFL_MASK) == SSSR_TFL_MASK) 317 || (drv_data->tx == drv_data->tx_end)) 318 return 0; 319 320 write_SSDR(*(u32 *)(drv_data->tx), reg); 321 drv_data->tx += 4; 322 323 return 1; 324 } 325 326 static int u32_reader(struct driver_data *drv_data) 327 { 328 void __iomem *reg = drv_data->ioaddr; 329 330 while ((read_SSSR(reg) & SSSR_RNE) 331 && (drv_data->rx < drv_data->rx_end)) { 332 *(u32 *)(drv_data->rx) = read_SSDR(reg); 333 drv_data->rx += 4; 334 } 335 336 return drv_data->rx == drv_data->rx_end; 337 } 338 339 void *pxa2xx_spi_next_transfer(struct driver_data *drv_data) 340 { 341 struct spi_message *msg = drv_data->cur_msg; 342 struct spi_transfer *trans = drv_data->cur_transfer; 343 344 /* Move to next transfer */ 345 if (trans->transfer_list.next != &msg->transfers) { 346 drv_data->cur_transfer = 347 list_entry(trans->transfer_list.next, 348 struct spi_transfer, 349 transfer_list); 350 return RUNNING_STATE; 351 } else 352 return DONE_STATE; 353 } 354 355 /* caller already set message->status; dma and pio irqs are blocked */ 356 static void giveback(struct driver_data *drv_data) 357 { 358 struct spi_transfer* last_transfer; 359 struct spi_message *msg; 360 361 msg = drv_data->cur_msg; 362 drv_data->cur_msg = NULL; 363 drv_data->cur_transfer = NULL; 364 365 last_transfer = list_entry(msg->transfers.prev, 366 struct spi_transfer, 367 transfer_list); 368 369 /* Delay if requested before any change in chip select */ 370 if (last_transfer->delay_usecs) 371 udelay(last_transfer->delay_usecs); 372 373 /* Drop chip select UNLESS cs_change is true or we are returning 374 * a message with an error, or next message is for another chip 375 */ 376 if (!last_transfer->cs_change) 377 cs_deassert(drv_data); 378 else { 379 struct spi_message *next_msg; 380 381 /* Holding of cs was hinted, but we need to make sure 382 * the next message is for the same chip. Don't waste 383 * time with the following tests unless this was hinted. 384 * 385 * We cannot postpone this until pump_messages, because 386 * after calling msg->complete (below) the driver that 387 * sent the current message could be unloaded, which 388 * could invalidate the cs_control() callback... 389 */ 390 391 /* get a pointer to the next message, if any */ 392 next_msg = spi_get_next_queued_message(drv_data->master); 393 394 /* see if the next and current messages point 395 * to the same chip 396 */ 397 if (next_msg && next_msg->spi != msg->spi) 398 next_msg = NULL; 399 if (!next_msg || msg->state == ERROR_STATE) 400 cs_deassert(drv_data); 401 } 402 403 spi_finalize_current_message(drv_data->master); 404 drv_data->cur_chip = NULL; 405 } 406 407 static void reset_sccr1(struct driver_data *drv_data) 408 { 409 void __iomem *reg = drv_data->ioaddr; 410 struct chip_data *chip = drv_data->cur_chip; 411 u32 sccr1_reg; 412 413 sccr1_reg = read_SSCR1(reg) & ~drv_data->int_cr1; 414 sccr1_reg &= ~SSCR1_RFT; 415 sccr1_reg |= chip->threshold; 416 write_SSCR1(sccr1_reg, reg); 417 } 418 419 static void int_error_stop(struct driver_data *drv_data, const char* msg) 420 { 421 void __iomem *reg = drv_data->ioaddr; 422 423 /* Stop and reset SSP */ 424 write_SSSR_CS(drv_data, drv_data->clear_sr); 425 reset_sccr1(drv_data); 426 if (!pxa25x_ssp_comp(drv_data)) 427 write_SSTO(0, reg); 428 pxa2xx_spi_flush(drv_data); 429 write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg); 430 431 dev_err(&drv_data->pdev->dev, "%s\n", msg); 432 433 drv_data->cur_msg->state = ERROR_STATE; 434 tasklet_schedule(&drv_data->pump_transfers); 435 } 436 437 static void int_transfer_complete(struct driver_data *drv_data) 438 { 439 void __iomem *reg = drv_data->ioaddr; 440 441 /* Stop SSP */ 442 write_SSSR_CS(drv_data, drv_data->clear_sr); 443 reset_sccr1(drv_data); 444 if (!pxa25x_ssp_comp(drv_data)) 445 write_SSTO(0, reg); 446 447 /* Update total byte transferred return count actual bytes read */ 448 drv_data->cur_msg->actual_length += drv_data->len - 449 (drv_data->rx_end - drv_data->rx); 450 451 /* Transfer delays and chip select release are 452 * handled in pump_transfers or giveback 453 */ 454 455 /* Move to next transfer */ 456 drv_data->cur_msg->state = pxa2xx_spi_next_transfer(drv_data); 457 458 /* Schedule transfer tasklet */ 459 tasklet_schedule(&drv_data->pump_transfers); 460 } 461 462 static irqreturn_t interrupt_transfer(struct driver_data *drv_data) 463 { 464 void __iomem *reg = drv_data->ioaddr; 465 466 u32 irq_mask = (read_SSCR1(reg) & SSCR1_TIE) ? 467 drv_data->mask_sr : drv_data->mask_sr & ~SSSR_TFS; 468 469 u32 irq_status = read_SSSR(reg) & irq_mask; 470 471 if (irq_status & SSSR_ROR) { 472 int_error_stop(drv_data, "interrupt_transfer: fifo overrun"); 473 return IRQ_HANDLED; 474 } 475 476 if (irq_status & SSSR_TINT) { 477 write_SSSR(SSSR_TINT, reg); 478 if (drv_data->read(drv_data)) { 479 int_transfer_complete(drv_data); 480 return IRQ_HANDLED; 481 } 482 } 483 484 /* Drain rx fifo, Fill tx fifo and prevent overruns */ 485 do { 486 if (drv_data->read(drv_data)) { 487 int_transfer_complete(drv_data); 488 return IRQ_HANDLED; 489 } 490 } while (drv_data->write(drv_data)); 491 492 if (drv_data->read(drv_data)) { 493 int_transfer_complete(drv_data); 494 return IRQ_HANDLED; 495 } 496 497 if (drv_data->tx == drv_data->tx_end) { 498 u32 bytes_left; 499 u32 sccr1_reg; 500 501 sccr1_reg = read_SSCR1(reg); 502 sccr1_reg &= ~SSCR1_TIE; 503 504 /* 505 * PXA25x_SSP has no timeout, set up rx threshould for the 506 * remaining RX bytes. 507 */ 508 if (pxa25x_ssp_comp(drv_data)) { 509 510 sccr1_reg &= ~SSCR1_RFT; 511 512 bytes_left = drv_data->rx_end - drv_data->rx; 513 switch (drv_data->n_bytes) { 514 case 4: 515 bytes_left >>= 1; 516 case 2: 517 bytes_left >>= 1; 518 } 519 520 if (bytes_left > RX_THRESH_DFLT) 521 bytes_left = RX_THRESH_DFLT; 522 523 sccr1_reg |= SSCR1_RxTresh(bytes_left); 524 } 525 write_SSCR1(sccr1_reg, reg); 526 } 527 528 /* We did something */ 529 return IRQ_HANDLED; 530 } 531 532 static irqreturn_t ssp_int(int irq, void *dev_id) 533 { 534 struct driver_data *drv_data = dev_id; 535 void __iomem *reg = drv_data->ioaddr; 536 u32 sccr1_reg; 537 u32 mask = drv_data->mask_sr; 538 u32 status; 539 540 /* 541 * The IRQ might be shared with other peripherals so we must first 542 * check that are we RPM suspended or not. If we are we assume that 543 * the IRQ was not for us (we shouldn't be RPM suspended when the 544 * interrupt is enabled). 545 */ 546 if (pm_runtime_suspended(&drv_data->pdev->dev)) 547 return IRQ_NONE; 548 549 /* 550 * If the device is not yet in RPM suspended state and we get an 551 * interrupt that is meant for another device, check if status bits 552 * are all set to one. That means that the device is already 553 * powered off. 554 */ 555 status = read_SSSR(reg); 556 if (status == ~0) 557 return IRQ_NONE; 558 559 sccr1_reg = read_SSCR1(reg); 560 561 /* Ignore possible writes if we don't need to write */ 562 if (!(sccr1_reg & SSCR1_TIE)) 563 mask &= ~SSSR_TFS; 564 565 if (!(status & mask)) 566 return IRQ_NONE; 567 568 if (!drv_data->cur_msg) { 569 570 write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg); 571 write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg); 572 if (!pxa25x_ssp_comp(drv_data)) 573 write_SSTO(0, reg); 574 write_SSSR_CS(drv_data, drv_data->clear_sr); 575 576 dev_err(&drv_data->pdev->dev, "bad message state " 577 "in interrupt handler\n"); 578 579 /* Never fail */ 580 return IRQ_HANDLED; 581 } 582 583 return drv_data->transfer_handler(drv_data); 584 } 585 586 static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate) 587 { 588 unsigned long ssp_clk = drv_data->max_clk_rate; 589 const struct ssp_device *ssp = drv_data->ssp; 590 591 rate = min_t(int, ssp_clk, rate); 592 593 if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP) 594 return ((ssp_clk / (2 * rate) - 1) & 0xff) << 8; 595 else 596 return ((ssp_clk / rate - 1) & 0xfff) << 8; 597 } 598 599 static void pump_transfers(unsigned long data) 600 { 601 struct driver_data *drv_data = (struct driver_data *)data; 602 struct spi_message *message = NULL; 603 struct spi_transfer *transfer = NULL; 604 struct spi_transfer *previous = NULL; 605 struct chip_data *chip = NULL; 606 void __iomem *reg = drv_data->ioaddr; 607 u32 clk_div = 0; 608 u8 bits = 0; 609 u32 speed = 0; 610 u32 cr0; 611 u32 cr1; 612 u32 dma_thresh = drv_data->cur_chip->dma_threshold; 613 u32 dma_burst = drv_data->cur_chip->dma_burst_size; 614 615 /* Get current state information */ 616 message = drv_data->cur_msg; 617 transfer = drv_data->cur_transfer; 618 chip = drv_data->cur_chip; 619 620 /* Handle for abort */ 621 if (message->state == ERROR_STATE) { 622 message->status = -EIO; 623 giveback(drv_data); 624 return; 625 } 626 627 /* Handle end of message */ 628 if (message->state == DONE_STATE) { 629 message->status = 0; 630 giveback(drv_data); 631 return; 632 } 633 634 /* Delay if requested at end of transfer before CS change */ 635 if (message->state == RUNNING_STATE) { 636 previous = list_entry(transfer->transfer_list.prev, 637 struct spi_transfer, 638 transfer_list); 639 if (previous->delay_usecs) 640 udelay(previous->delay_usecs); 641 642 /* Drop chip select only if cs_change is requested */ 643 if (previous->cs_change) 644 cs_deassert(drv_data); 645 } 646 647 /* Check if we can DMA this transfer */ 648 if (!pxa2xx_spi_dma_is_possible(transfer->len) && chip->enable_dma) { 649 650 /* reject already-mapped transfers; PIO won't always work */ 651 if (message->is_dma_mapped 652 || transfer->rx_dma || transfer->tx_dma) { 653 dev_err(&drv_data->pdev->dev, 654 "pump_transfers: mapped transfer length " 655 "of %u is greater than %d\n", 656 transfer->len, MAX_DMA_LEN); 657 message->status = -EINVAL; 658 giveback(drv_data); 659 return; 660 } 661 662 /* warn ... we force this to PIO mode */ 663 if (printk_ratelimit()) 664 dev_warn(&message->spi->dev, "pump_transfers: " 665 "DMA disabled for transfer length %ld " 666 "greater than %d\n", 667 (long)drv_data->len, MAX_DMA_LEN); 668 } 669 670 /* Setup the transfer state based on the type of transfer */ 671 if (pxa2xx_spi_flush(drv_data) == 0) { 672 dev_err(&drv_data->pdev->dev, "pump_transfers: flush failed\n"); 673 message->status = -EIO; 674 giveback(drv_data); 675 return; 676 } 677 drv_data->n_bytes = chip->n_bytes; 678 drv_data->tx = (void *)transfer->tx_buf; 679 drv_data->tx_end = drv_data->tx + transfer->len; 680 drv_data->rx = transfer->rx_buf; 681 drv_data->rx_end = drv_data->rx + transfer->len; 682 drv_data->rx_dma = transfer->rx_dma; 683 drv_data->tx_dma = transfer->tx_dma; 684 drv_data->len = transfer->len; 685 drv_data->write = drv_data->tx ? chip->write : null_writer; 686 drv_data->read = drv_data->rx ? chip->read : null_reader; 687 688 /* Change speed and bit per word on a per transfer */ 689 cr0 = chip->cr0; 690 if (transfer->speed_hz || transfer->bits_per_word) { 691 692 bits = chip->bits_per_word; 693 speed = chip->speed_hz; 694 695 if (transfer->speed_hz) 696 speed = transfer->speed_hz; 697 698 if (transfer->bits_per_word) 699 bits = transfer->bits_per_word; 700 701 clk_div = ssp_get_clk_div(drv_data, speed); 702 703 if (bits <= 8) { 704 drv_data->n_bytes = 1; 705 drv_data->read = drv_data->read != null_reader ? 706 u8_reader : null_reader; 707 drv_data->write = drv_data->write != null_writer ? 708 u8_writer : null_writer; 709 } else if (bits <= 16) { 710 drv_data->n_bytes = 2; 711 drv_data->read = drv_data->read != null_reader ? 712 u16_reader : null_reader; 713 drv_data->write = drv_data->write != null_writer ? 714 u16_writer : null_writer; 715 } else if (bits <= 32) { 716 drv_data->n_bytes = 4; 717 drv_data->read = drv_data->read != null_reader ? 718 u32_reader : null_reader; 719 drv_data->write = drv_data->write != null_writer ? 720 u32_writer : null_writer; 721 } 722 /* if bits/word is changed in dma mode, then must check the 723 * thresholds and burst also */ 724 if (chip->enable_dma) { 725 if (pxa2xx_spi_set_dma_burst_and_threshold(chip, 726 message->spi, 727 bits, &dma_burst, 728 &dma_thresh)) 729 if (printk_ratelimit()) 730 dev_warn(&message->spi->dev, 731 "pump_transfers: " 732 "DMA burst size reduced to " 733 "match bits_per_word\n"); 734 } 735 736 cr0 = clk_div 737 | SSCR0_Motorola 738 | SSCR0_DataSize(bits > 16 ? bits - 16 : bits) 739 | SSCR0_SSE 740 | (bits > 16 ? SSCR0_EDSS : 0); 741 } 742 743 message->state = RUNNING_STATE; 744 745 drv_data->dma_mapped = 0; 746 if (pxa2xx_spi_dma_is_possible(drv_data->len)) 747 drv_data->dma_mapped = pxa2xx_spi_map_dma_buffers(drv_data); 748 if (drv_data->dma_mapped) { 749 750 /* Ensure we have the correct interrupt handler */ 751 drv_data->transfer_handler = pxa2xx_spi_dma_transfer; 752 753 pxa2xx_spi_dma_prepare(drv_data, dma_burst); 754 755 /* Clear status and start DMA engine */ 756 cr1 = chip->cr1 | dma_thresh | drv_data->dma_cr1; 757 write_SSSR(drv_data->clear_sr, reg); 758 759 pxa2xx_spi_dma_start(drv_data); 760 } else { 761 /* Ensure we have the correct interrupt handler */ 762 drv_data->transfer_handler = interrupt_transfer; 763 764 /* Clear status */ 765 cr1 = chip->cr1 | chip->threshold | drv_data->int_cr1; 766 write_SSSR_CS(drv_data, drv_data->clear_sr); 767 } 768 769 if (is_lpss_ssp(drv_data)) { 770 if ((read_SSIRF(reg) & 0xff) != chip->lpss_rx_threshold) 771 write_SSIRF(chip->lpss_rx_threshold, reg); 772 if ((read_SSITF(reg) & 0xffff) != chip->lpss_tx_threshold) 773 write_SSITF(chip->lpss_tx_threshold, reg); 774 } 775 776 /* see if we need to reload the config registers */ 777 if ((read_SSCR0(reg) != cr0) 778 || (read_SSCR1(reg) & SSCR1_CHANGE_MASK) != 779 (cr1 & SSCR1_CHANGE_MASK)) { 780 781 /* stop the SSP, and update the other bits */ 782 write_SSCR0(cr0 & ~SSCR0_SSE, reg); 783 if (!pxa25x_ssp_comp(drv_data)) 784 write_SSTO(chip->timeout, reg); 785 /* first set CR1 without interrupt and service enables */ 786 write_SSCR1(cr1 & SSCR1_CHANGE_MASK, reg); 787 /* restart the SSP */ 788 write_SSCR0(cr0, reg); 789 790 } else { 791 if (!pxa25x_ssp_comp(drv_data)) 792 write_SSTO(chip->timeout, reg); 793 } 794 795 cs_assert(drv_data); 796 797 /* after chip select, release the data by enabling service 798 * requests and interrupts, without changing any mode bits */ 799 write_SSCR1(cr1, reg); 800 } 801 802 static int pxa2xx_spi_transfer_one_message(struct spi_master *master, 803 struct spi_message *msg) 804 { 805 struct driver_data *drv_data = spi_master_get_devdata(master); 806 807 drv_data->cur_msg = msg; 808 /* Initial message state*/ 809 drv_data->cur_msg->state = START_STATE; 810 drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next, 811 struct spi_transfer, 812 transfer_list); 813 814 /* prepare to setup the SSP, in pump_transfers, using the per 815 * chip configuration */ 816 drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi); 817 818 /* Mark as busy and launch transfers */ 819 tasklet_schedule(&drv_data->pump_transfers); 820 return 0; 821 } 822 823 static int pxa2xx_spi_unprepare_transfer(struct spi_master *master) 824 { 825 struct driver_data *drv_data = spi_master_get_devdata(master); 826 827 /* Disable the SSP now */ 828 write_SSCR0(read_SSCR0(drv_data->ioaddr) & ~SSCR0_SSE, 829 drv_data->ioaddr); 830 831 return 0; 832 } 833 834 static int setup_cs(struct spi_device *spi, struct chip_data *chip, 835 struct pxa2xx_spi_chip *chip_info) 836 { 837 int err = 0; 838 839 if (chip == NULL || chip_info == NULL) 840 return 0; 841 842 /* NOTE: setup() can be called multiple times, possibly with 843 * different chip_info, release previously requested GPIO 844 */ 845 if (gpio_is_valid(chip->gpio_cs)) 846 gpio_free(chip->gpio_cs); 847 848 /* If (*cs_control) is provided, ignore GPIO chip select */ 849 if (chip_info->cs_control) { 850 chip->cs_control = chip_info->cs_control; 851 return 0; 852 } 853 854 if (gpio_is_valid(chip_info->gpio_cs)) { 855 err = gpio_request(chip_info->gpio_cs, "SPI_CS"); 856 if (err) { 857 dev_err(&spi->dev, "failed to request chip select " 858 "GPIO%d\n", chip_info->gpio_cs); 859 return err; 860 } 861 862 chip->gpio_cs = chip_info->gpio_cs; 863 chip->gpio_cs_inverted = spi->mode & SPI_CS_HIGH; 864 865 err = gpio_direction_output(chip->gpio_cs, 866 !chip->gpio_cs_inverted); 867 } 868 869 return err; 870 } 871 872 static int setup(struct spi_device *spi) 873 { 874 struct pxa2xx_spi_chip *chip_info = NULL; 875 struct chip_data *chip; 876 struct driver_data *drv_data = spi_master_get_devdata(spi->master); 877 unsigned int clk_div; 878 uint tx_thres, tx_hi_thres, rx_thres; 879 880 if (is_lpss_ssp(drv_data)) { 881 tx_thres = LPSS_TX_LOTHRESH_DFLT; 882 tx_hi_thres = LPSS_TX_HITHRESH_DFLT; 883 rx_thres = LPSS_RX_THRESH_DFLT; 884 } else { 885 tx_thres = TX_THRESH_DFLT; 886 tx_hi_thres = 0; 887 rx_thres = RX_THRESH_DFLT; 888 } 889 890 /* Only alloc on first setup */ 891 chip = spi_get_ctldata(spi); 892 if (!chip) { 893 chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL); 894 if (!chip) { 895 dev_err(&spi->dev, 896 "failed setup: can't allocate chip data\n"); 897 return -ENOMEM; 898 } 899 900 if (drv_data->ssp_type == CE4100_SSP) { 901 if (spi->chip_select > 4) { 902 dev_err(&spi->dev, "failed setup: " 903 "cs number must not be > 4.\n"); 904 kfree(chip); 905 return -EINVAL; 906 } 907 908 chip->frm = spi->chip_select; 909 } else 910 chip->gpio_cs = -1; 911 chip->enable_dma = 0; 912 chip->timeout = TIMOUT_DFLT; 913 } 914 915 /* protocol drivers may change the chip settings, so... 916 * if chip_info exists, use it */ 917 chip_info = spi->controller_data; 918 919 /* chip_info isn't always needed */ 920 chip->cr1 = 0; 921 if (chip_info) { 922 if (chip_info->timeout) 923 chip->timeout = chip_info->timeout; 924 if (chip_info->tx_threshold) 925 tx_thres = chip_info->tx_threshold; 926 if (chip_info->tx_hi_threshold) 927 tx_hi_thres = chip_info->tx_hi_threshold; 928 if (chip_info->rx_threshold) 929 rx_thres = chip_info->rx_threshold; 930 chip->enable_dma = drv_data->master_info->enable_dma; 931 chip->dma_threshold = 0; 932 if (chip_info->enable_loopback) 933 chip->cr1 = SSCR1_LBM; 934 } else if (ACPI_HANDLE(&spi->dev)) { 935 /* 936 * Slave devices enumerated from ACPI namespace don't 937 * usually have chip_info but we still might want to use 938 * DMA with them. 939 */ 940 chip->enable_dma = drv_data->master_info->enable_dma; 941 } 942 943 chip->threshold = (SSCR1_RxTresh(rx_thres) & SSCR1_RFT) | 944 (SSCR1_TxTresh(tx_thres) & SSCR1_TFT); 945 946 chip->lpss_rx_threshold = SSIRF_RxThresh(rx_thres); 947 chip->lpss_tx_threshold = SSITF_TxLoThresh(tx_thres) 948 | SSITF_TxHiThresh(tx_hi_thres); 949 950 /* set dma burst and threshold outside of chip_info path so that if 951 * chip_info goes away after setting chip->enable_dma, the 952 * burst and threshold can still respond to changes in bits_per_word */ 953 if (chip->enable_dma) { 954 /* set up legal burst and threshold for dma */ 955 if (pxa2xx_spi_set_dma_burst_and_threshold(chip, spi, 956 spi->bits_per_word, 957 &chip->dma_burst_size, 958 &chip->dma_threshold)) { 959 dev_warn(&spi->dev, "in setup: DMA burst size reduced " 960 "to match bits_per_word\n"); 961 } 962 } 963 964 clk_div = ssp_get_clk_div(drv_data, spi->max_speed_hz); 965 chip->speed_hz = spi->max_speed_hz; 966 967 chip->cr0 = clk_div 968 | SSCR0_Motorola 969 | SSCR0_DataSize(spi->bits_per_word > 16 ? 970 spi->bits_per_word - 16 : spi->bits_per_word) 971 | SSCR0_SSE 972 | (spi->bits_per_word > 16 ? SSCR0_EDSS : 0); 973 chip->cr1 &= ~(SSCR1_SPO | SSCR1_SPH); 974 chip->cr1 |= (((spi->mode & SPI_CPHA) != 0) ? SSCR1_SPH : 0) 975 | (((spi->mode & SPI_CPOL) != 0) ? SSCR1_SPO : 0); 976 977 if (spi->mode & SPI_LOOP) 978 chip->cr1 |= SSCR1_LBM; 979 980 /* NOTE: PXA25x_SSP _could_ use external clocking ... */ 981 if (!pxa25x_ssp_comp(drv_data)) 982 dev_dbg(&spi->dev, "%ld Hz actual, %s\n", 983 drv_data->max_clk_rate 984 / (1 + ((chip->cr0 & SSCR0_SCR(0xfff)) >> 8)), 985 chip->enable_dma ? "DMA" : "PIO"); 986 else 987 dev_dbg(&spi->dev, "%ld Hz actual, %s\n", 988 drv_data->max_clk_rate / 2 989 / (1 + ((chip->cr0 & SSCR0_SCR(0x0ff)) >> 8)), 990 chip->enable_dma ? "DMA" : "PIO"); 991 992 if (spi->bits_per_word <= 8) { 993 chip->n_bytes = 1; 994 chip->read = u8_reader; 995 chip->write = u8_writer; 996 } else if (spi->bits_per_word <= 16) { 997 chip->n_bytes = 2; 998 chip->read = u16_reader; 999 chip->write = u16_writer; 1000 } else if (spi->bits_per_word <= 32) { 1001 chip->cr0 |= SSCR0_EDSS; 1002 chip->n_bytes = 4; 1003 chip->read = u32_reader; 1004 chip->write = u32_writer; 1005 } 1006 chip->bits_per_word = spi->bits_per_word; 1007 1008 spi_set_ctldata(spi, chip); 1009 1010 if (drv_data->ssp_type == CE4100_SSP) 1011 return 0; 1012 1013 return setup_cs(spi, chip, chip_info); 1014 } 1015 1016 static void cleanup(struct spi_device *spi) 1017 { 1018 struct chip_data *chip = spi_get_ctldata(spi); 1019 struct driver_data *drv_data = spi_master_get_devdata(spi->master); 1020 1021 if (!chip) 1022 return; 1023 1024 if (drv_data->ssp_type != CE4100_SSP && gpio_is_valid(chip->gpio_cs)) 1025 gpio_free(chip->gpio_cs); 1026 1027 kfree(chip); 1028 } 1029 1030 #ifdef CONFIG_ACPI 1031 static struct pxa2xx_spi_master * 1032 pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev) 1033 { 1034 struct pxa2xx_spi_master *pdata; 1035 struct acpi_device *adev; 1036 struct ssp_device *ssp; 1037 struct resource *res; 1038 int devid; 1039 1040 if (!ACPI_HANDLE(&pdev->dev) || 1041 acpi_bus_get_device(ACPI_HANDLE(&pdev->dev), &adev)) 1042 return NULL; 1043 1044 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); 1045 if (!pdata) { 1046 dev_err(&pdev->dev, 1047 "failed to allocate memory for platform data\n"); 1048 return NULL; 1049 } 1050 1051 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 1052 if (!res) 1053 return NULL; 1054 1055 ssp = &pdata->ssp; 1056 1057 ssp->phys_base = res->start; 1058 ssp->mmio_base = devm_ioremap_resource(&pdev->dev, res); 1059 if (IS_ERR(ssp->mmio_base)) 1060 return NULL; 1061 1062 ssp->clk = devm_clk_get(&pdev->dev, NULL); 1063 ssp->irq = platform_get_irq(pdev, 0); 1064 ssp->type = LPSS_SSP; 1065 ssp->pdev = pdev; 1066 1067 ssp->port_id = -1; 1068 if (adev->pnp.unique_id && !kstrtoint(adev->pnp.unique_id, 0, &devid)) 1069 ssp->port_id = devid; 1070 1071 pdata->num_chipselect = 1; 1072 pdata->enable_dma = true; 1073 1074 return pdata; 1075 } 1076 1077 static struct acpi_device_id pxa2xx_spi_acpi_match[] = { 1078 { "INT33C0", 0 }, 1079 { "INT33C1", 0 }, 1080 { "80860F0E", 0 }, 1081 { }, 1082 }; 1083 MODULE_DEVICE_TABLE(acpi, pxa2xx_spi_acpi_match); 1084 #else 1085 static inline struct pxa2xx_spi_master * 1086 pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev) 1087 { 1088 return NULL; 1089 } 1090 #endif 1091 1092 static int pxa2xx_spi_probe(struct platform_device *pdev) 1093 { 1094 struct device *dev = &pdev->dev; 1095 struct pxa2xx_spi_master *platform_info; 1096 struct spi_master *master; 1097 struct driver_data *drv_data; 1098 struct ssp_device *ssp; 1099 int status; 1100 1101 platform_info = dev_get_platdata(dev); 1102 if (!platform_info) { 1103 platform_info = pxa2xx_spi_acpi_get_pdata(pdev); 1104 if (!platform_info) { 1105 dev_err(&pdev->dev, "missing platform data\n"); 1106 return -ENODEV; 1107 } 1108 } 1109 1110 ssp = pxa_ssp_request(pdev->id, pdev->name); 1111 if (!ssp) 1112 ssp = &platform_info->ssp; 1113 1114 if (!ssp->mmio_base) { 1115 dev_err(&pdev->dev, "failed to get ssp\n"); 1116 return -ENODEV; 1117 } 1118 1119 /* Allocate master with space for drv_data and null dma buffer */ 1120 master = spi_alloc_master(dev, sizeof(struct driver_data) + 16); 1121 if (!master) { 1122 dev_err(&pdev->dev, "cannot alloc spi_master\n"); 1123 pxa_ssp_free(ssp); 1124 return -ENOMEM; 1125 } 1126 drv_data = spi_master_get_devdata(master); 1127 drv_data->master = master; 1128 drv_data->master_info = platform_info; 1129 drv_data->pdev = pdev; 1130 drv_data->ssp = ssp; 1131 1132 master->dev.parent = &pdev->dev; 1133 master->dev.of_node = pdev->dev.of_node; 1134 /* the spi->mode bits understood by this driver: */ 1135 master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP; 1136 1137 master->bus_num = ssp->port_id; 1138 master->num_chipselect = platform_info->num_chipselect; 1139 master->dma_alignment = DMA_ALIGNMENT; 1140 master->cleanup = cleanup; 1141 master->setup = setup; 1142 master->transfer_one_message = pxa2xx_spi_transfer_one_message; 1143 master->unprepare_transfer_hardware = pxa2xx_spi_unprepare_transfer; 1144 master->auto_runtime_pm = true; 1145 1146 drv_data->ssp_type = ssp->type; 1147 drv_data->null_dma_buf = (u32 *)PTR_ALIGN(&drv_data[1], DMA_ALIGNMENT); 1148 1149 drv_data->ioaddr = ssp->mmio_base; 1150 drv_data->ssdr_physical = ssp->phys_base + SSDR; 1151 if (pxa25x_ssp_comp(drv_data)) { 1152 master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16); 1153 drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE; 1154 drv_data->dma_cr1 = 0; 1155 drv_data->clear_sr = SSSR_ROR; 1156 drv_data->mask_sr = SSSR_RFS | SSSR_TFS | SSSR_ROR; 1157 } else { 1158 master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32); 1159 drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE | SSCR1_TINTE; 1160 drv_data->dma_cr1 = DEFAULT_DMA_CR1; 1161 drv_data->clear_sr = SSSR_ROR | SSSR_TINT; 1162 drv_data->mask_sr = SSSR_TINT | SSSR_RFS | SSSR_TFS | SSSR_ROR; 1163 } 1164 1165 status = request_irq(ssp->irq, ssp_int, IRQF_SHARED, dev_name(dev), 1166 drv_data); 1167 if (status < 0) { 1168 dev_err(&pdev->dev, "cannot get IRQ %d\n", ssp->irq); 1169 goto out_error_master_alloc; 1170 } 1171 1172 /* Setup DMA if requested */ 1173 drv_data->tx_channel = -1; 1174 drv_data->rx_channel = -1; 1175 if (platform_info->enable_dma) { 1176 status = pxa2xx_spi_dma_setup(drv_data); 1177 if (status) { 1178 dev_dbg(dev, "no DMA channels available, using PIO\n"); 1179 platform_info->enable_dma = false; 1180 } 1181 } 1182 1183 /* Enable SOC clock */ 1184 clk_prepare_enable(ssp->clk); 1185 1186 drv_data->max_clk_rate = clk_get_rate(ssp->clk); 1187 1188 /* Load default SSP configuration */ 1189 write_SSCR0(0, drv_data->ioaddr); 1190 write_SSCR1(SSCR1_RxTresh(RX_THRESH_DFLT) | 1191 SSCR1_TxTresh(TX_THRESH_DFLT), 1192 drv_data->ioaddr); 1193 write_SSCR0(SSCR0_SCR(2) 1194 | SSCR0_Motorola 1195 | SSCR0_DataSize(8), 1196 drv_data->ioaddr); 1197 if (!pxa25x_ssp_comp(drv_data)) 1198 write_SSTO(0, drv_data->ioaddr); 1199 write_SSPSP(0, drv_data->ioaddr); 1200 1201 lpss_ssp_setup(drv_data); 1202 1203 tasklet_init(&drv_data->pump_transfers, pump_transfers, 1204 (unsigned long)drv_data); 1205 1206 /* Register with the SPI framework */ 1207 platform_set_drvdata(pdev, drv_data); 1208 status = spi_register_master(master); 1209 if (status != 0) { 1210 dev_err(&pdev->dev, "problem registering spi master\n"); 1211 goto out_error_clock_enabled; 1212 } 1213 1214 pm_runtime_set_autosuspend_delay(&pdev->dev, 50); 1215 pm_runtime_use_autosuspend(&pdev->dev); 1216 pm_runtime_set_active(&pdev->dev); 1217 pm_runtime_enable(&pdev->dev); 1218 1219 return status; 1220 1221 out_error_clock_enabled: 1222 clk_disable_unprepare(ssp->clk); 1223 pxa2xx_spi_dma_release(drv_data); 1224 free_irq(ssp->irq, drv_data); 1225 1226 out_error_master_alloc: 1227 spi_master_put(master); 1228 pxa_ssp_free(ssp); 1229 return status; 1230 } 1231 1232 static int pxa2xx_spi_remove(struct platform_device *pdev) 1233 { 1234 struct driver_data *drv_data = platform_get_drvdata(pdev); 1235 struct ssp_device *ssp; 1236 1237 if (!drv_data) 1238 return 0; 1239 ssp = drv_data->ssp; 1240 1241 pm_runtime_get_sync(&pdev->dev); 1242 1243 /* Disable the SSP at the peripheral and SOC level */ 1244 write_SSCR0(0, drv_data->ioaddr); 1245 clk_disable_unprepare(ssp->clk); 1246 1247 /* Release DMA */ 1248 if (drv_data->master_info->enable_dma) 1249 pxa2xx_spi_dma_release(drv_data); 1250 1251 pm_runtime_put_noidle(&pdev->dev); 1252 pm_runtime_disable(&pdev->dev); 1253 1254 /* Release IRQ */ 1255 free_irq(ssp->irq, drv_data); 1256 1257 /* Release SSP */ 1258 pxa_ssp_free(ssp); 1259 1260 /* Disconnect from the SPI framework */ 1261 spi_unregister_master(drv_data->master); 1262 1263 return 0; 1264 } 1265 1266 static void pxa2xx_spi_shutdown(struct platform_device *pdev) 1267 { 1268 int status = 0; 1269 1270 if ((status = pxa2xx_spi_remove(pdev)) != 0) 1271 dev_err(&pdev->dev, "shutdown failed with %d\n", status); 1272 } 1273 1274 #ifdef CONFIG_PM 1275 static int pxa2xx_spi_suspend(struct device *dev) 1276 { 1277 struct driver_data *drv_data = dev_get_drvdata(dev); 1278 struct ssp_device *ssp = drv_data->ssp; 1279 int status = 0; 1280 1281 status = spi_master_suspend(drv_data->master); 1282 if (status != 0) 1283 return status; 1284 write_SSCR0(0, drv_data->ioaddr); 1285 clk_disable_unprepare(ssp->clk); 1286 1287 return 0; 1288 } 1289 1290 static int pxa2xx_spi_resume(struct device *dev) 1291 { 1292 struct driver_data *drv_data = dev_get_drvdata(dev); 1293 struct ssp_device *ssp = drv_data->ssp; 1294 int status = 0; 1295 1296 pxa2xx_spi_dma_resume(drv_data); 1297 1298 /* Enable the SSP clock */ 1299 clk_prepare_enable(ssp->clk); 1300 1301 /* Start the queue running */ 1302 status = spi_master_resume(drv_data->master); 1303 if (status != 0) { 1304 dev_err(dev, "problem starting queue (%d)\n", status); 1305 return status; 1306 } 1307 1308 return 0; 1309 } 1310 #endif 1311 1312 #ifdef CONFIG_PM_RUNTIME 1313 static int pxa2xx_spi_runtime_suspend(struct device *dev) 1314 { 1315 struct driver_data *drv_data = dev_get_drvdata(dev); 1316 1317 clk_disable_unprepare(drv_data->ssp->clk); 1318 return 0; 1319 } 1320 1321 static int pxa2xx_spi_runtime_resume(struct device *dev) 1322 { 1323 struct driver_data *drv_data = dev_get_drvdata(dev); 1324 1325 clk_prepare_enable(drv_data->ssp->clk); 1326 return 0; 1327 } 1328 #endif 1329 1330 static const struct dev_pm_ops pxa2xx_spi_pm_ops = { 1331 SET_SYSTEM_SLEEP_PM_OPS(pxa2xx_spi_suspend, pxa2xx_spi_resume) 1332 SET_RUNTIME_PM_OPS(pxa2xx_spi_runtime_suspend, 1333 pxa2xx_spi_runtime_resume, NULL) 1334 }; 1335 1336 static struct platform_driver driver = { 1337 .driver = { 1338 .name = "pxa2xx-spi", 1339 .owner = THIS_MODULE, 1340 .pm = &pxa2xx_spi_pm_ops, 1341 .acpi_match_table = ACPI_PTR(pxa2xx_spi_acpi_match), 1342 }, 1343 .probe = pxa2xx_spi_probe, 1344 .remove = pxa2xx_spi_remove, 1345 .shutdown = pxa2xx_spi_shutdown, 1346 }; 1347 1348 static int __init pxa2xx_spi_init(void) 1349 { 1350 return platform_driver_register(&driver); 1351 } 1352 subsys_initcall(pxa2xx_spi_init); 1353 1354 static void __exit pxa2xx_spi_exit(void) 1355 { 1356 platform_driver_unregister(&driver); 1357 } 1358 module_exit(pxa2xx_spi_exit); 1359