1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Marvell Orion SPI controller driver 4 * 5 * Author: Shadi Ammouri <shadi@marvell.com> 6 * Copyright (C) 2007-2008 Marvell Ltd. 7 */ 8 9 #include <linux/interrupt.h> 10 #include <linux/delay.h> 11 #include <linux/platform_device.h> 12 #include <linux/err.h> 13 #include <linux/io.h> 14 #include <linux/spi/spi.h> 15 #include <linux/module.h> 16 #include <linux/pm_runtime.h> 17 #include <linux/of.h> 18 #include <linux/of_address.h> 19 #include <linux/of_device.h> 20 #include <linux/clk.h> 21 #include <linux/sizes.h> 22 #include <asm/unaligned.h> 23 24 #define DRIVER_NAME "orion_spi" 25 26 /* Runtime PM autosuspend timeout: PM is fairly light on this driver */ 27 #define SPI_AUTOSUSPEND_TIMEOUT 200 28 29 /* Some SoCs using this driver support up to 8 chip selects. 30 * It is up to the implementer to only use the chip selects 31 * that are available. 32 */ 33 #define ORION_NUM_CHIPSELECTS 8 34 35 #define ORION_SPI_WAIT_RDY_MAX_LOOP 2000 /* in usec */ 36 37 #define ORION_SPI_IF_CTRL_REG 0x00 38 #define ORION_SPI_IF_CONFIG_REG 0x04 39 #define ORION_SPI_IF_RXLSBF BIT(14) 40 #define ORION_SPI_IF_TXLSBF BIT(13) 41 #define ORION_SPI_DATA_OUT_REG 0x08 42 #define ORION_SPI_DATA_IN_REG 0x0c 43 #define ORION_SPI_INT_CAUSE_REG 0x10 44 #define ORION_SPI_TIMING_PARAMS_REG 0x18 45 46 /* Register for the "Direct Mode" */ 47 #define SPI_DIRECT_WRITE_CONFIG_REG 0x20 48 49 #define ORION_SPI_TMISO_SAMPLE_MASK (0x3 << 6) 50 #define ORION_SPI_TMISO_SAMPLE_1 (1 << 6) 51 #define ORION_SPI_TMISO_SAMPLE_2 (2 << 6) 52 53 #define ORION_SPI_MODE_CPOL (1 << 11) 54 #define ORION_SPI_MODE_CPHA (1 << 12) 55 #define ORION_SPI_IF_8_16_BIT_MODE (1 << 5) 56 #define ORION_SPI_CLK_PRESCALE_MASK 0x1F 57 #define ARMADA_SPI_CLK_PRESCALE_MASK 0xDF 58 #define ORION_SPI_MODE_MASK (ORION_SPI_MODE_CPOL | \ 59 ORION_SPI_MODE_CPHA) 60 #define ORION_SPI_CS_MASK 0x1C 61 #define ORION_SPI_CS_SHIFT 2 62 #define ORION_SPI_CS(cs) ((cs << ORION_SPI_CS_SHIFT) & \ 63 ORION_SPI_CS_MASK) 64 65 enum orion_spi_type { 66 ORION_SPI, 67 ARMADA_SPI, 68 }; 69 70 struct orion_spi_dev { 71 enum orion_spi_type typ; 72 /* 73 * min_divisor and max_hz should be exclusive, the only we can 74 * have both is for managing the armada-370-spi case with old 75 * device tree 76 */ 77 unsigned long max_hz; 78 unsigned int min_divisor; 79 unsigned int max_divisor; 80 u32 prescale_mask; 81 bool is_errata_50mhz_ac; 82 }; 83 84 struct orion_direct_acc { 85 void __iomem *vaddr; 86 u32 size; 87 }; 88 89 struct orion_child_options { 90 struct orion_direct_acc direct_access; 91 }; 92 93 struct orion_spi { 94 struct spi_master *master; 95 void __iomem *base; 96 struct clk *clk; 97 struct clk *axi_clk; 98 const struct orion_spi_dev *devdata; 99 100 struct orion_child_options child[ORION_NUM_CHIPSELECTS]; 101 }; 102 103 static inline void __iomem *spi_reg(struct orion_spi *orion_spi, u32 reg) 104 { 105 return orion_spi->base + reg; 106 } 107 108 static inline void 109 orion_spi_setbits(struct orion_spi *orion_spi, u32 reg, u32 mask) 110 { 111 void __iomem *reg_addr = spi_reg(orion_spi, reg); 112 u32 val; 113 114 val = readl(reg_addr); 115 val |= mask; 116 writel(val, reg_addr); 117 } 118 119 static inline void 120 orion_spi_clrbits(struct orion_spi *orion_spi, u32 reg, u32 mask) 121 { 122 void __iomem *reg_addr = spi_reg(orion_spi, reg); 123 u32 val; 124 125 val = readl(reg_addr); 126 val &= ~mask; 127 writel(val, reg_addr); 128 } 129 130 static int orion_spi_baudrate_set(struct spi_device *spi, unsigned int speed) 131 { 132 u32 tclk_hz; 133 u32 rate; 134 u32 prescale; 135 u32 reg; 136 struct orion_spi *orion_spi; 137 const struct orion_spi_dev *devdata; 138 139 orion_spi = spi_master_get_devdata(spi->master); 140 devdata = orion_spi->devdata; 141 142 tclk_hz = clk_get_rate(orion_spi->clk); 143 144 if (devdata->typ == ARMADA_SPI) { 145 /* 146 * Given the core_clk (tclk_hz) and the target rate (speed) we 147 * determine the best values for SPR (in [0 .. 15]) and SPPR (in 148 * [0..7]) such that 149 * 150 * core_clk / (SPR * 2 ** SPPR) 151 * 152 * is as big as possible but not bigger than speed. 153 */ 154 155 /* best integer divider: */ 156 unsigned divider = DIV_ROUND_UP(tclk_hz, speed); 157 unsigned spr, sppr; 158 159 if (divider < 16) { 160 /* This is the easy case, divider is less than 16 */ 161 spr = divider; 162 sppr = 0; 163 164 } else { 165 unsigned two_pow_sppr; 166 /* 167 * Find the highest bit set in divider. This and the 168 * three next bits define SPR (apart from rounding). 169 * SPPR is then the number of zero bits that must be 170 * appended: 171 */ 172 sppr = fls(divider) - 4; 173 174 /* 175 * As SPR only has 4 bits, we have to round divider up 176 * to the next multiple of 2 ** sppr. 177 */ 178 two_pow_sppr = 1 << sppr; 179 divider = (divider + two_pow_sppr - 1) & -two_pow_sppr; 180 181 /* 182 * recalculate sppr as rounding up divider might have 183 * increased it enough to change the position of the 184 * highest set bit. In this case the bit that now 185 * doesn't make it into SPR is 0, so there is no need to 186 * round again. 187 */ 188 sppr = fls(divider) - 4; 189 spr = divider >> sppr; 190 191 /* 192 * Now do range checking. SPR is constructed to have a 193 * width of 4 bits, so this is fine for sure. So we 194 * still need to check for sppr to fit into 3 bits: 195 */ 196 if (sppr > 7) 197 return -EINVAL; 198 } 199 200 prescale = ((sppr & 0x6) << 5) | ((sppr & 0x1) << 4) | spr; 201 } else { 202 /* 203 * the supported rates are: 4,6,8...30 204 * round up as we look for equal or less speed 205 */ 206 rate = DIV_ROUND_UP(tclk_hz, speed); 207 rate = roundup(rate, 2); 208 209 /* check if requested speed is too small */ 210 if (rate > 30) 211 return -EINVAL; 212 213 if (rate < 4) 214 rate = 4; 215 216 /* Convert the rate to SPI clock divisor value. */ 217 prescale = 0x10 + rate/2; 218 } 219 220 reg = readl(spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG)); 221 reg = ((reg & ~devdata->prescale_mask) | prescale); 222 writel(reg, spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG)); 223 224 return 0; 225 } 226 227 static void 228 orion_spi_mode_set(struct spi_device *spi) 229 { 230 u32 reg; 231 struct orion_spi *orion_spi; 232 233 orion_spi = spi_master_get_devdata(spi->master); 234 235 reg = readl(spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG)); 236 reg &= ~ORION_SPI_MODE_MASK; 237 if (spi->mode & SPI_CPOL) 238 reg |= ORION_SPI_MODE_CPOL; 239 if (spi->mode & SPI_CPHA) 240 reg |= ORION_SPI_MODE_CPHA; 241 if (spi->mode & SPI_LSB_FIRST) 242 reg |= ORION_SPI_IF_RXLSBF | ORION_SPI_IF_TXLSBF; 243 else 244 reg &= ~(ORION_SPI_IF_RXLSBF | ORION_SPI_IF_TXLSBF); 245 246 writel(reg, spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG)); 247 } 248 249 static void 250 orion_spi_50mhz_ac_timing_erratum(struct spi_device *spi, unsigned int speed) 251 { 252 u32 reg; 253 struct orion_spi *orion_spi; 254 255 orion_spi = spi_master_get_devdata(spi->master); 256 257 /* 258 * Erratum description: (Erratum NO. FE-9144572) The device 259 * SPI interface supports frequencies of up to 50 MHz. 260 * However, due to this erratum, when the device core clock is 261 * 250 MHz and the SPI interfaces is configured for 50MHz SPI 262 * clock and CPOL=CPHA=1 there might occur data corruption on 263 * reads from the SPI device. 264 * Erratum Workaround: 265 * Work in one of the following configurations: 266 * 1. Set CPOL=CPHA=0 in "SPI Interface Configuration 267 * Register". 268 * 2. Set TMISO_SAMPLE value to 0x2 in "SPI Timing Parameters 1 269 * Register" before setting the interface. 270 */ 271 reg = readl(spi_reg(orion_spi, ORION_SPI_TIMING_PARAMS_REG)); 272 reg &= ~ORION_SPI_TMISO_SAMPLE_MASK; 273 274 if (clk_get_rate(orion_spi->clk) == 250000000 && 275 speed == 50000000 && spi->mode & SPI_CPOL && 276 spi->mode & SPI_CPHA) 277 reg |= ORION_SPI_TMISO_SAMPLE_2; 278 else 279 reg |= ORION_SPI_TMISO_SAMPLE_1; /* This is the default value */ 280 281 writel(reg, spi_reg(orion_spi, ORION_SPI_TIMING_PARAMS_REG)); 282 } 283 284 /* 285 * called only when no transfer is active on the bus 286 */ 287 static int 288 orion_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) 289 { 290 struct orion_spi *orion_spi; 291 unsigned int speed = spi->max_speed_hz; 292 unsigned int bits_per_word = spi->bits_per_word; 293 int rc; 294 295 orion_spi = spi_master_get_devdata(spi->master); 296 297 if ((t != NULL) && t->speed_hz) 298 speed = t->speed_hz; 299 300 if ((t != NULL) && t->bits_per_word) 301 bits_per_word = t->bits_per_word; 302 303 orion_spi_mode_set(spi); 304 305 if (orion_spi->devdata->is_errata_50mhz_ac) 306 orion_spi_50mhz_ac_timing_erratum(spi, speed); 307 308 rc = orion_spi_baudrate_set(spi, speed); 309 if (rc) 310 return rc; 311 312 if (bits_per_word == 16) 313 orion_spi_setbits(orion_spi, ORION_SPI_IF_CONFIG_REG, 314 ORION_SPI_IF_8_16_BIT_MODE); 315 else 316 orion_spi_clrbits(orion_spi, ORION_SPI_IF_CONFIG_REG, 317 ORION_SPI_IF_8_16_BIT_MODE); 318 319 return 0; 320 } 321 322 static void orion_spi_set_cs(struct spi_device *spi, bool enable) 323 { 324 struct orion_spi *orion_spi; 325 326 orion_spi = spi_master_get_devdata(spi->master); 327 328 /* 329 * If this line is using a GPIO to control chip select, this internal 330 * .set_cs() function will still be called, so we clear any previous 331 * chip select. The CS we activate will not have any elecrical effect, 332 * as it is handled by a GPIO, but that doesn't matter. What we need 333 * is to deassert the old chip select and assert some other chip select. 334 */ 335 orion_spi_clrbits(orion_spi, ORION_SPI_IF_CTRL_REG, ORION_SPI_CS_MASK); 336 orion_spi_setbits(orion_spi, ORION_SPI_IF_CTRL_REG, 337 ORION_SPI_CS(spi->chip_select)); 338 339 /* 340 * Chip select logic is inverted from spi_set_cs(). For lines using a 341 * GPIO to do chip select SPI_CS_HIGH is enforced and inversion happens 342 * in the GPIO library, but we don't care about that, because in those 343 * cases we are dealing with an unused native CS anyways so the polarity 344 * doesn't matter. 345 */ 346 if (!enable) 347 orion_spi_setbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1); 348 else 349 orion_spi_clrbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1); 350 } 351 352 static inline int orion_spi_wait_till_ready(struct orion_spi *orion_spi) 353 { 354 int i; 355 356 for (i = 0; i < ORION_SPI_WAIT_RDY_MAX_LOOP; i++) { 357 if (readl(spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG))) 358 return 1; 359 360 udelay(1); 361 } 362 363 return -1; 364 } 365 366 static inline int 367 orion_spi_write_read_8bit(struct spi_device *spi, 368 const u8 **tx_buf, u8 **rx_buf) 369 { 370 void __iomem *tx_reg, *rx_reg, *int_reg; 371 struct orion_spi *orion_spi; 372 373 orion_spi = spi_master_get_devdata(spi->master); 374 tx_reg = spi_reg(orion_spi, ORION_SPI_DATA_OUT_REG); 375 rx_reg = spi_reg(orion_spi, ORION_SPI_DATA_IN_REG); 376 int_reg = spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG); 377 378 /* clear the interrupt cause register */ 379 writel(0x0, int_reg); 380 381 if (tx_buf && *tx_buf) 382 writel(*(*tx_buf)++, tx_reg); 383 else 384 writel(0, tx_reg); 385 386 if (orion_spi_wait_till_ready(orion_spi) < 0) { 387 dev_err(&spi->dev, "TXS timed out\n"); 388 return -1; 389 } 390 391 if (rx_buf && *rx_buf) 392 *(*rx_buf)++ = readl(rx_reg); 393 394 return 1; 395 } 396 397 static inline int 398 orion_spi_write_read_16bit(struct spi_device *spi, 399 const u16 **tx_buf, u16 **rx_buf) 400 { 401 void __iomem *tx_reg, *rx_reg, *int_reg; 402 struct orion_spi *orion_spi; 403 404 orion_spi = spi_master_get_devdata(spi->master); 405 tx_reg = spi_reg(orion_spi, ORION_SPI_DATA_OUT_REG); 406 rx_reg = spi_reg(orion_spi, ORION_SPI_DATA_IN_REG); 407 int_reg = spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG); 408 409 /* clear the interrupt cause register */ 410 writel(0x0, int_reg); 411 412 if (tx_buf && *tx_buf) 413 writel(__cpu_to_le16(get_unaligned((*tx_buf)++)), tx_reg); 414 else 415 writel(0, tx_reg); 416 417 if (orion_spi_wait_till_ready(orion_spi) < 0) { 418 dev_err(&spi->dev, "TXS timed out\n"); 419 return -1; 420 } 421 422 if (rx_buf && *rx_buf) 423 put_unaligned(__le16_to_cpu(readl(rx_reg)), (*rx_buf)++); 424 425 return 1; 426 } 427 428 static unsigned int 429 orion_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer) 430 { 431 unsigned int count; 432 int word_len; 433 struct orion_spi *orion_spi; 434 int cs = spi->chip_select; 435 void __iomem *vaddr; 436 437 word_len = spi->bits_per_word; 438 count = xfer->len; 439 440 orion_spi = spi_master_get_devdata(spi->master); 441 442 /* 443 * Use SPI direct write mode if base address is available. Otherwise 444 * fall back to PIO mode for this transfer. 445 */ 446 vaddr = orion_spi->child[cs].direct_access.vaddr; 447 448 if (vaddr && xfer->tx_buf && word_len == 8) { 449 unsigned int cnt = count / 4; 450 unsigned int rem = count % 4; 451 452 /* 453 * Send the TX-data to the SPI device via the direct 454 * mapped address window 455 */ 456 iowrite32_rep(vaddr, xfer->tx_buf, cnt); 457 if (rem) { 458 u32 *buf = (u32 *)xfer->tx_buf; 459 460 iowrite8_rep(vaddr, &buf[cnt], rem); 461 } 462 463 return count; 464 } 465 466 if (word_len == 8) { 467 const u8 *tx = xfer->tx_buf; 468 u8 *rx = xfer->rx_buf; 469 470 do { 471 if (orion_spi_write_read_8bit(spi, &tx, &rx) < 0) 472 goto out; 473 count--; 474 spi_delay_exec(&xfer->word_delay, xfer); 475 } while (count); 476 } else if (word_len == 16) { 477 const u16 *tx = xfer->tx_buf; 478 u16 *rx = xfer->rx_buf; 479 480 do { 481 if (orion_spi_write_read_16bit(spi, &tx, &rx) < 0) 482 goto out; 483 count -= 2; 484 spi_delay_exec(&xfer->word_delay, xfer); 485 } while (count); 486 } 487 488 out: 489 return xfer->len - count; 490 } 491 492 static int orion_spi_transfer_one(struct spi_master *master, 493 struct spi_device *spi, 494 struct spi_transfer *t) 495 { 496 int status = 0; 497 498 status = orion_spi_setup_transfer(spi, t); 499 if (status < 0) 500 return status; 501 502 if (t->len) 503 orion_spi_write_read(spi, t); 504 505 return status; 506 } 507 508 static int orion_spi_setup(struct spi_device *spi) 509 { 510 return orion_spi_setup_transfer(spi, NULL); 511 } 512 513 static int orion_spi_reset(struct orion_spi *orion_spi) 514 { 515 /* Verify that the CS is deasserted */ 516 orion_spi_clrbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1); 517 518 /* Don't deassert CS between the direct mapped SPI transfers */ 519 writel(0, spi_reg(orion_spi, SPI_DIRECT_WRITE_CONFIG_REG)); 520 521 return 0; 522 } 523 524 static const struct orion_spi_dev orion_spi_dev_data = { 525 .typ = ORION_SPI, 526 .min_divisor = 4, 527 .max_divisor = 30, 528 .prescale_mask = ORION_SPI_CLK_PRESCALE_MASK, 529 }; 530 531 static const struct orion_spi_dev armada_370_spi_dev_data = { 532 .typ = ARMADA_SPI, 533 .min_divisor = 4, 534 .max_divisor = 1920, 535 .max_hz = 50000000, 536 .prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK, 537 }; 538 539 static const struct orion_spi_dev armada_xp_spi_dev_data = { 540 .typ = ARMADA_SPI, 541 .max_hz = 50000000, 542 .max_divisor = 1920, 543 .prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK, 544 }; 545 546 static const struct orion_spi_dev armada_375_spi_dev_data = { 547 .typ = ARMADA_SPI, 548 .min_divisor = 15, 549 .max_divisor = 1920, 550 .prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK, 551 }; 552 553 static const struct orion_spi_dev armada_380_spi_dev_data = { 554 .typ = ARMADA_SPI, 555 .max_hz = 50000000, 556 .max_divisor = 1920, 557 .prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK, 558 .is_errata_50mhz_ac = true, 559 }; 560 561 static const struct of_device_id orion_spi_of_match_table[] = { 562 { 563 .compatible = "marvell,orion-spi", 564 .data = &orion_spi_dev_data, 565 }, 566 { 567 .compatible = "marvell,armada-370-spi", 568 .data = &armada_370_spi_dev_data, 569 }, 570 { 571 .compatible = "marvell,armada-375-spi", 572 .data = &armada_375_spi_dev_data, 573 }, 574 { 575 .compatible = "marvell,armada-380-spi", 576 .data = &armada_380_spi_dev_data, 577 }, 578 { 579 .compatible = "marvell,armada-390-spi", 580 .data = &armada_xp_spi_dev_data, 581 }, 582 { 583 .compatible = "marvell,armada-xp-spi", 584 .data = &armada_xp_spi_dev_data, 585 }, 586 587 {} 588 }; 589 MODULE_DEVICE_TABLE(of, orion_spi_of_match_table); 590 591 static int orion_spi_probe(struct platform_device *pdev) 592 { 593 const struct of_device_id *of_id; 594 const struct orion_spi_dev *devdata; 595 struct spi_master *master; 596 struct orion_spi *spi; 597 struct resource *r; 598 unsigned long tclk_hz; 599 int status = 0; 600 struct device_node *np; 601 602 master = spi_alloc_master(&pdev->dev, sizeof(*spi)); 603 if (master == NULL) { 604 dev_dbg(&pdev->dev, "master allocation failed\n"); 605 return -ENOMEM; 606 } 607 608 if (pdev->id != -1) 609 master->bus_num = pdev->id; 610 if (pdev->dev.of_node) { 611 u32 cell_index; 612 613 if (!of_property_read_u32(pdev->dev.of_node, "cell-index", 614 &cell_index)) 615 master->bus_num = cell_index; 616 } 617 618 /* we support all 4 SPI modes and LSB first option */ 619 master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_LSB_FIRST; 620 master->set_cs = orion_spi_set_cs; 621 master->transfer_one = orion_spi_transfer_one; 622 master->num_chipselect = ORION_NUM_CHIPSELECTS; 623 master->setup = orion_spi_setup; 624 master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16); 625 master->auto_runtime_pm = true; 626 master->use_gpio_descriptors = true; 627 master->flags = SPI_MASTER_GPIO_SS; 628 629 platform_set_drvdata(pdev, master); 630 631 spi = spi_master_get_devdata(master); 632 spi->master = master; 633 634 of_id = of_match_device(orion_spi_of_match_table, &pdev->dev); 635 devdata = (of_id) ? of_id->data : &orion_spi_dev_data; 636 spi->devdata = devdata; 637 638 spi->clk = devm_clk_get(&pdev->dev, NULL); 639 if (IS_ERR(spi->clk)) { 640 status = PTR_ERR(spi->clk); 641 goto out; 642 } 643 644 status = clk_prepare_enable(spi->clk); 645 if (status) 646 goto out; 647 648 /* The following clock is only used by some SoCs */ 649 spi->axi_clk = devm_clk_get(&pdev->dev, "axi"); 650 if (PTR_ERR(spi->axi_clk) == -EPROBE_DEFER) { 651 status = -EPROBE_DEFER; 652 goto out_rel_clk; 653 } 654 if (!IS_ERR(spi->axi_clk)) 655 clk_prepare_enable(spi->axi_clk); 656 657 tclk_hz = clk_get_rate(spi->clk); 658 659 /* 660 * With old device tree, armada-370-spi could be used with 661 * Armada XP, however for this SoC the maximum frequency is 662 * 50MHz instead of tclk/4. On Armada 370, tclk cannot be 663 * higher than 200MHz. So, in order to be able to handle both 664 * SoCs, we can take the minimum of 50MHz and tclk/4. 665 */ 666 if (of_device_is_compatible(pdev->dev.of_node, 667 "marvell,armada-370-spi")) 668 master->max_speed_hz = min(devdata->max_hz, 669 DIV_ROUND_UP(tclk_hz, devdata->min_divisor)); 670 else if (devdata->min_divisor) 671 master->max_speed_hz = 672 DIV_ROUND_UP(tclk_hz, devdata->min_divisor); 673 else 674 master->max_speed_hz = devdata->max_hz; 675 master->min_speed_hz = DIV_ROUND_UP(tclk_hz, devdata->max_divisor); 676 677 r = platform_get_resource(pdev, IORESOURCE_MEM, 0); 678 spi->base = devm_ioremap_resource(&pdev->dev, r); 679 if (IS_ERR(spi->base)) { 680 status = PTR_ERR(spi->base); 681 goto out_rel_axi_clk; 682 } 683 684 for_each_available_child_of_node(pdev->dev.of_node, np) { 685 struct orion_direct_acc *dir_acc; 686 u32 cs; 687 688 /* Get chip-select number from the "reg" property */ 689 status = of_property_read_u32(np, "reg", &cs); 690 if (status) { 691 dev_err(&pdev->dev, 692 "%pOF has no valid 'reg' property (%d)\n", 693 np, status); 694 continue; 695 } 696 697 /* 698 * Check if an address is configured for this SPI device. If 699 * not, the MBus mapping via the 'ranges' property in the 'soc' 700 * node is not configured and this device should not use the 701 * direct mode. In this case, just continue with the next 702 * device. 703 */ 704 status = of_address_to_resource(pdev->dev.of_node, cs + 1, r); 705 if (status) 706 continue; 707 708 /* 709 * Only map one page for direct access. This is enough for the 710 * simple TX transfer which only writes to the first word. 711 * This needs to get extended for the direct SPI NOR / SPI NAND 712 * support, once this gets implemented. 713 */ 714 dir_acc = &spi->child[cs].direct_access; 715 dir_acc->vaddr = devm_ioremap(&pdev->dev, r->start, PAGE_SIZE); 716 if (!dir_acc->vaddr) { 717 status = -ENOMEM; 718 goto out_rel_axi_clk; 719 } 720 dir_acc->size = PAGE_SIZE; 721 722 dev_info(&pdev->dev, "CS%d configured for direct access\n", cs); 723 } 724 725 pm_runtime_set_active(&pdev->dev); 726 pm_runtime_use_autosuspend(&pdev->dev); 727 pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT); 728 pm_runtime_enable(&pdev->dev); 729 730 status = orion_spi_reset(spi); 731 if (status < 0) 732 goto out_rel_pm; 733 734 master->dev.of_node = pdev->dev.of_node; 735 status = spi_register_master(master); 736 if (status < 0) 737 goto out_rel_pm; 738 739 return status; 740 741 out_rel_pm: 742 pm_runtime_disable(&pdev->dev); 743 out_rel_axi_clk: 744 clk_disable_unprepare(spi->axi_clk); 745 out_rel_clk: 746 clk_disable_unprepare(spi->clk); 747 out: 748 spi_master_put(master); 749 return status; 750 } 751 752 753 static int orion_spi_remove(struct platform_device *pdev) 754 { 755 struct spi_master *master = platform_get_drvdata(pdev); 756 struct orion_spi *spi = spi_master_get_devdata(master); 757 758 pm_runtime_get_sync(&pdev->dev); 759 clk_disable_unprepare(spi->axi_clk); 760 clk_disable_unprepare(spi->clk); 761 762 spi_unregister_master(master); 763 pm_runtime_disable(&pdev->dev); 764 765 return 0; 766 } 767 768 MODULE_ALIAS("platform:" DRIVER_NAME); 769 770 #ifdef CONFIG_PM 771 static int orion_spi_runtime_suspend(struct device *dev) 772 { 773 struct spi_master *master = dev_get_drvdata(dev); 774 struct orion_spi *spi = spi_master_get_devdata(master); 775 776 clk_disable_unprepare(spi->axi_clk); 777 clk_disable_unprepare(spi->clk); 778 return 0; 779 } 780 781 static int orion_spi_runtime_resume(struct device *dev) 782 { 783 struct spi_master *master = dev_get_drvdata(dev); 784 struct orion_spi *spi = spi_master_get_devdata(master); 785 786 if (!IS_ERR(spi->axi_clk)) 787 clk_prepare_enable(spi->axi_clk); 788 return clk_prepare_enable(spi->clk); 789 } 790 #endif 791 792 static const struct dev_pm_ops orion_spi_pm_ops = { 793 SET_RUNTIME_PM_OPS(orion_spi_runtime_suspend, 794 orion_spi_runtime_resume, 795 NULL) 796 }; 797 798 static struct platform_driver orion_spi_driver = { 799 .driver = { 800 .name = DRIVER_NAME, 801 .pm = &orion_spi_pm_ops, 802 .of_match_table = of_match_ptr(orion_spi_of_match_table), 803 }, 804 .probe = orion_spi_probe, 805 .remove = orion_spi_remove, 806 }; 807 808 module_platform_driver(orion_spi_driver); 809 810 MODULE_DESCRIPTION("Orion SPI driver"); 811 MODULE_AUTHOR("Shadi Ammouri <shadi@marvell.com>"); 812 MODULE_LICENSE("GPL"); 813