1 /* 2 * MPC52xx SPI bus driver. 3 * 4 * Copyright (C) 2008 Secret Lab Technologies Ltd. 5 * 6 * This file is released under the GPLv2 7 * 8 * This is the driver for the MPC5200's dedicated SPI controller. 9 * 10 * Note: this driver does not support the MPC5200 PSC in SPI mode. For 11 * that driver see drivers/spi/mpc52xx_psc_spi.c 12 */ 13 14 #include <linux/module.h> 15 #include <linux/init.h> 16 #include <linux/errno.h> 17 #include <linux/of_platform.h> 18 #include <linux/interrupt.h> 19 #include <linux/delay.h> 20 #include <linux/spi/spi.h> 21 #include <linux/io.h> 22 #include <linux/of_gpio.h> 23 #include <linux/slab.h> 24 #include <asm/time.h> 25 #include <asm/mpc52xx.h> 26 27 MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>"); 28 MODULE_DESCRIPTION("MPC52xx SPI (non-PSC) Driver"); 29 MODULE_LICENSE("GPL"); 30 31 /* Register offsets */ 32 #define SPI_CTRL1 0x00 33 #define SPI_CTRL1_SPIE (1 << 7) 34 #define SPI_CTRL1_SPE (1 << 6) 35 #define SPI_CTRL1_MSTR (1 << 4) 36 #define SPI_CTRL1_CPOL (1 << 3) 37 #define SPI_CTRL1_CPHA (1 << 2) 38 #define SPI_CTRL1_SSOE (1 << 1) 39 #define SPI_CTRL1_LSBFE (1 << 0) 40 41 #define SPI_CTRL2 0x01 42 #define SPI_BRR 0x04 43 44 #define SPI_STATUS 0x05 45 #define SPI_STATUS_SPIF (1 << 7) 46 #define SPI_STATUS_WCOL (1 << 6) 47 #define SPI_STATUS_MODF (1 << 4) 48 49 #define SPI_DATA 0x09 50 #define SPI_PORTDATA 0x0d 51 #define SPI_DATADIR 0x10 52 53 /* FSM state return values */ 54 #define FSM_STOP 0 /* Nothing more for the state machine to */ 55 /* do. If something interesting happens */ 56 /* then an IRQ will be received */ 57 #define FSM_POLL 1 /* need to poll for completion, an IRQ is */ 58 /* not expected */ 59 #define FSM_CONTINUE 2 /* Keep iterating the state machine */ 60 61 /* Driver internal data */ 62 struct mpc52xx_spi { 63 struct spi_master *master; 64 void __iomem *regs; 65 int irq0; /* MODF irq */ 66 int irq1; /* SPIF irq */ 67 unsigned int ipb_freq; 68 69 /* Statistics; not used now, but will be reintroduced for debugfs */ 70 int msg_count; 71 int wcol_count; 72 int wcol_ticks; 73 u32 wcol_tx_timestamp; 74 int modf_count; 75 int byte_count; 76 77 struct list_head queue; /* queue of pending messages */ 78 spinlock_t lock; 79 struct work_struct work; 80 81 /* Details of current transfer (length, and buffer pointers) */ 82 struct spi_message *message; /* current message */ 83 struct spi_transfer *transfer; /* current transfer */ 84 int (*state)(int irq, struct mpc52xx_spi *ms, u8 status, u8 data); 85 int len; 86 int timestamp; 87 u8 *rx_buf; 88 const u8 *tx_buf; 89 int cs_change; 90 int gpio_cs_count; 91 unsigned int *gpio_cs; 92 }; 93 94 /* 95 * CS control function 96 */ 97 static void mpc52xx_spi_chipsel(struct mpc52xx_spi *ms, int value) 98 { 99 int cs; 100 101 if (ms->gpio_cs_count > 0) { 102 cs = ms->message->spi->chip_select; 103 gpio_set_value(ms->gpio_cs[cs], value ? 0 : 1); 104 } else 105 out_8(ms->regs + SPI_PORTDATA, value ? 0 : 0x08); 106 } 107 108 /* 109 * Start a new transfer. This is called both by the idle state 110 * for the first transfer in a message, and by the wait state when the 111 * previous transfer in a message is complete. 112 */ 113 static void mpc52xx_spi_start_transfer(struct mpc52xx_spi *ms) 114 { 115 ms->rx_buf = ms->transfer->rx_buf; 116 ms->tx_buf = ms->transfer->tx_buf; 117 ms->len = ms->transfer->len; 118 119 /* Activate the chip select */ 120 if (ms->cs_change) 121 mpc52xx_spi_chipsel(ms, 1); 122 ms->cs_change = ms->transfer->cs_change; 123 124 /* Write out the first byte */ 125 ms->wcol_tx_timestamp = get_tbl(); 126 if (ms->tx_buf) 127 out_8(ms->regs + SPI_DATA, *ms->tx_buf++); 128 else 129 out_8(ms->regs + SPI_DATA, 0); 130 } 131 132 /* Forward declaration of state handlers */ 133 static int mpc52xx_spi_fsmstate_transfer(int irq, struct mpc52xx_spi *ms, 134 u8 status, u8 data); 135 static int mpc52xx_spi_fsmstate_wait(int irq, struct mpc52xx_spi *ms, 136 u8 status, u8 data); 137 138 /* 139 * IDLE state 140 * 141 * No transfers are in progress; if another transfer is pending then retrieve 142 * it and kick it off. Otherwise, stop processing the state machine 143 */ 144 static int 145 mpc52xx_spi_fsmstate_idle(int irq, struct mpc52xx_spi *ms, u8 status, u8 data) 146 { 147 struct spi_device *spi; 148 int spr, sppr; 149 u8 ctrl1; 150 151 if (status && (irq != NO_IRQ)) 152 dev_err(&ms->master->dev, "spurious irq, status=0x%.2x\n", 153 status); 154 155 /* Check if there is another transfer waiting. */ 156 if (list_empty(&ms->queue)) 157 return FSM_STOP; 158 159 /* get the head of the queue */ 160 ms->message = list_first_entry(&ms->queue, struct spi_message, queue); 161 list_del_init(&ms->message->queue); 162 163 /* Setup the controller parameters */ 164 ctrl1 = SPI_CTRL1_SPIE | SPI_CTRL1_SPE | SPI_CTRL1_MSTR; 165 spi = ms->message->spi; 166 if (spi->mode & SPI_CPHA) 167 ctrl1 |= SPI_CTRL1_CPHA; 168 if (spi->mode & SPI_CPOL) 169 ctrl1 |= SPI_CTRL1_CPOL; 170 if (spi->mode & SPI_LSB_FIRST) 171 ctrl1 |= SPI_CTRL1_LSBFE; 172 out_8(ms->regs + SPI_CTRL1, ctrl1); 173 174 /* Setup the controller speed */ 175 /* minimum divider is '2'. Also, add '1' to force rounding the 176 * divider up. */ 177 sppr = ((ms->ipb_freq / ms->message->spi->max_speed_hz) + 1) >> 1; 178 spr = 0; 179 if (sppr < 1) 180 sppr = 1; 181 while (((sppr - 1) & ~0x7) != 0) { 182 sppr = (sppr + 1) >> 1; /* add '1' to force rounding up */ 183 spr++; 184 } 185 sppr--; /* sppr quantity in register is offset by 1 */ 186 if (spr > 7) { 187 /* Don't overrun limits of SPI baudrate register */ 188 spr = 7; 189 sppr = 7; 190 } 191 out_8(ms->regs + SPI_BRR, sppr << 4 | spr); /* Set speed */ 192 193 ms->cs_change = 1; 194 ms->transfer = container_of(ms->message->transfers.next, 195 struct spi_transfer, transfer_list); 196 197 mpc52xx_spi_start_transfer(ms); 198 ms->state = mpc52xx_spi_fsmstate_transfer; 199 200 return FSM_CONTINUE; 201 } 202 203 /* 204 * TRANSFER state 205 * 206 * In the middle of a transfer. If the SPI core has completed processing 207 * a byte, then read out the received data and write out the next byte 208 * (unless this transfer is finished; in which case go on to the wait 209 * state) 210 */ 211 static int mpc52xx_spi_fsmstate_transfer(int irq, struct mpc52xx_spi *ms, 212 u8 status, u8 data) 213 { 214 if (!status) 215 return ms->irq0 ? FSM_STOP : FSM_POLL; 216 217 if (status & SPI_STATUS_WCOL) { 218 /* The SPI controller is stoopid. At slower speeds, it may 219 * raise the SPIF flag before the state machine is actually 220 * finished, which causes a collision (internal to the state 221 * machine only). The manual recommends inserting a delay 222 * between receiving the interrupt and sending the next byte, 223 * but it can also be worked around simply by retrying the 224 * transfer which is what we do here. */ 225 ms->wcol_count++; 226 ms->wcol_ticks += get_tbl() - ms->wcol_tx_timestamp; 227 ms->wcol_tx_timestamp = get_tbl(); 228 data = 0; 229 if (ms->tx_buf) 230 data = *(ms->tx_buf - 1); 231 out_8(ms->regs + SPI_DATA, data); /* try again */ 232 return FSM_CONTINUE; 233 } else if (status & SPI_STATUS_MODF) { 234 ms->modf_count++; 235 dev_err(&ms->master->dev, "mode fault\n"); 236 mpc52xx_spi_chipsel(ms, 0); 237 ms->message->status = -EIO; 238 ms->message->complete(ms->message->context); 239 ms->state = mpc52xx_spi_fsmstate_idle; 240 return FSM_CONTINUE; 241 } 242 243 /* Read data out of the spi device */ 244 ms->byte_count++; 245 if (ms->rx_buf) 246 *ms->rx_buf++ = data; 247 248 /* Is the transfer complete? */ 249 ms->len--; 250 if (ms->len == 0) { 251 ms->timestamp = get_tbl(); 252 ms->timestamp += ms->transfer->delay_usecs * tb_ticks_per_usec; 253 ms->state = mpc52xx_spi_fsmstate_wait; 254 return FSM_CONTINUE; 255 } 256 257 /* Write out the next byte */ 258 ms->wcol_tx_timestamp = get_tbl(); 259 if (ms->tx_buf) 260 out_8(ms->regs + SPI_DATA, *ms->tx_buf++); 261 else 262 out_8(ms->regs + SPI_DATA, 0); 263 264 return FSM_CONTINUE; 265 } 266 267 /* 268 * WAIT state 269 * 270 * A transfer has completed; need to wait for the delay period to complete 271 * before starting the next transfer 272 */ 273 static int 274 mpc52xx_spi_fsmstate_wait(int irq, struct mpc52xx_spi *ms, u8 status, u8 data) 275 { 276 if (status && irq) 277 dev_err(&ms->master->dev, "spurious irq, status=0x%.2x\n", 278 status); 279 280 if (((int)get_tbl()) - ms->timestamp < 0) 281 return FSM_POLL; 282 283 ms->message->actual_length += ms->transfer->len; 284 285 /* Check if there is another transfer in this message. If there 286 * aren't then deactivate CS, notify sender, and drop back to idle 287 * to start the next message. */ 288 if (ms->transfer->transfer_list.next == &ms->message->transfers) { 289 ms->msg_count++; 290 mpc52xx_spi_chipsel(ms, 0); 291 ms->message->status = 0; 292 ms->message->complete(ms->message->context); 293 ms->state = mpc52xx_spi_fsmstate_idle; 294 return FSM_CONTINUE; 295 } 296 297 /* There is another transfer; kick it off */ 298 299 if (ms->cs_change) 300 mpc52xx_spi_chipsel(ms, 0); 301 302 ms->transfer = container_of(ms->transfer->transfer_list.next, 303 struct spi_transfer, transfer_list); 304 mpc52xx_spi_start_transfer(ms); 305 ms->state = mpc52xx_spi_fsmstate_transfer; 306 return FSM_CONTINUE; 307 } 308 309 /** 310 * mpc52xx_spi_fsm_process - Finite State Machine iteration function 311 * @irq: irq number that triggered the FSM or 0 for polling 312 * @ms: pointer to mpc52xx_spi driver data 313 */ 314 static void mpc52xx_spi_fsm_process(int irq, struct mpc52xx_spi *ms) 315 { 316 int rc = FSM_CONTINUE; 317 u8 status, data; 318 319 while (rc == FSM_CONTINUE) { 320 /* Interrupt cleared by read of STATUS followed by 321 * read of DATA registers */ 322 status = in_8(ms->regs + SPI_STATUS); 323 data = in_8(ms->regs + SPI_DATA); 324 rc = ms->state(irq, ms, status, data); 325 } 326 327 if (rc == FSM_POLL) 328 schedule_work(&ms->work); 329 } 330 331 /** 332 * mpc52xx_spi_irq - IRQ handler 333 */ 334 static irqreturn_t mpc52xx_spi_irq(int irq, void *_ms) 335 { 336 struct mpc52xx_spi *ms = _ms; 337 spin_lock(&ms->lock); 338 mpc52xx_spi_fsm_process(irq, ms); 339 spin_unlock(&ms->lock); 340 return IRQ_HANDLED; 341 } 342 343 /** 344 * mpc52xx_spi_wq - Workqueue function for polling the state machine 345 */ 346 static void mpc52xx_spi_wq(struct work_struct *work) 347 { 348 struct mpc52xx_spi *ms = container_of(work, struct mpc52xx_spi, work); 349 unsigned long flags; 350 351 spin_lock_irqsave(&ms->lock, flags); 352 mpc52xx_spi_fsm_process(0, ms); 353 spin_unlock_irqrestore(&ms->lock, flags); 354 } 355 356 /* 357 * spi_master ops 358 */ 359 360 static int mpc52xx_spi_setup(struct spi_device *spi) 361 { 362 if (spi->bits_per_word % 8) 363 return -EINVAL; 364 365 if (spi->mode & ~(SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST)) 366 return -EINVAL; 367 368 if (spi->chip_select >= spi->master->num_chipselect) 369 return -EINVAL; 370 371 return 0; 372 } 373 374 static int mpc52xx_spi_transfer(struct spi_device *spi, struct spi_message *m) 375 { 376 struct mpc52xx_spi *ms = spi_master_get_devdata(spi->master); 377 unsigned long flags; 378 379 m->actual_length = 0; 380 m->status = -EINPROGRESS; 381 382 spin_lock_irqsave(&ms->lock, flags); 383 list_add_tail(&m->queue, &ms->queue); 384 spin_unlock_irqrestore(&ms->lock, flags); 385 schedule_work(&ms->work); 386 387 return 0; 388 } 389 390 /* 391 * OF Platform Bus Binding 392 */ 393 static int __devinit mpc52xx_spi_probe(struct platform_device *op) 394 { 395 struct spi_master *master; 396 struct mpc52xx_spi *ms; 397 void __iomem *regs; 398 u8 ctrl1; 399 int rc, i = 0; 400 int gpio_cs; 401 402 /* MMIO registers */ 403 dev_dbg(&op->dev, "probing mpc5200 SPI device\n"); 404 regs = of_iomap(op->dev.of_node, 0); 405 if (!regs) 406 return -ENODEV; 407 408 /* initialize the device */ 409 ctrl1 = SPI_CTRL1_SPIE | SPI_CTRL1_SPE | SPI_CTRL1_MSTR; 410 out_8(regs + SPI_CTRL1, ctrl1); 411 out_8(regs + SPI_CTRL2, 0x0); 412 out_8(regs + SPI_DATADIR, 0xe); /* Set output pins */ 413 out_8(regs + SPI_PORTDATA, 0x8); /* Deassert /SS signal */ 414 415 /* Clear the status register and re-read it to check for a MODF 416 * failure. This driver cannot currently handle multiple masters 417 * on the SPI bus. This fault will also occur if the SPI signals 418 * are not connected to any pins (port_config setting) */ 419 in_8(regs + SPI_STATUS); 420 out_8(regs + SPI_CTRL1, ctrl1); 421 422 in_8(regs + SPI_DATA); 423 if (in_8(regs + SPI_STATUS) & SPI_STATUS_MODF) { 424 dev_err(&op->dev, "mode fault; is port_config correct?\n"); 425 rc = -EIO; 426 goto err_init; 427 } 428 429 dev_dbg(&op->dev, "allocating spi_master struct\n"); 430 master = spi_alloc_master(&op->dev, sizeof *ms); 431 if (!master) { 432 rc = -ENOMEM; 433 goto err_alloc; 434 } 435 436 master->setup = mpc52xx_spi_setup; 437 master->transfer = mpc52xx_spi_transfer; 438 master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST; 439 master->dev.of_node = op->dev.of_node; 440 441 dev_set_drvdata(&op->dev, master); 442 443 ms = spi_master_get_devdata(master); 444 ms->master = master; 445 ms->regs = regs; 446 ms->irq0 = irq_of_parse_and_map(op->dev.of_node, 0); 447 ms->irq1 = irq_of_parse_and_map(op->dev.of_node, 1); 448 ms->state = mpc52xx_spi_fsmstate_idle; 449 ms->ipb_freq = mpc5xxx_get_bus_frequency(op->dev.of_node); 450 ms->gpio_cs_count = of_gpio_count(op->dev.of_node); 451 if (ms->gpio_cs_count > 0) { 452 master->num_chipselect = ms->gpio_cs_count; 453 ms->gpio_cs = kmalloc(ms->gpio_cs_count * sizeof(unsigned int), 454 GFP_KERNEL); 455 if (!ms->gpio_cs) { 456 rc = -ENOMEM; 457 goto err_alloc; 458 } 459 460 for (i = 0; i < ms->gpio_cs_count; i++) { 461 gpio_cs = of_get_gpio(op->dev.of_node, i); 462 if (gpio_cs < 0) { 463 dev_err(&op->dev, 464 "could not parse the gpio field " 465 "in oftree\n"); 466 rc = -ENODEV; 467 goto err_gpio; 468 } 469 470 rc = gpio_request(gpio_cs, dev_name(&op->dev)); 471 if (rc) { 472 dev_err(&op->dev, 473 "can't request spi cs gpio #%d " 474 "on gpio line %d\n", i, gpio_cs); 475 goto err_gpio; 476 } 477 478 gpio_direction_output(gpio_cs, 1); 479 ms->gpio_cs[i] = gpio_cs; 480 } 481 } 482 483 spin_lock_init(&ms->lock); 484 INIT_LIST_HEAD(&ms->queue); 485 INIT_WORK(&ms->work, mpc52xx_spi_wq); 486 487 /* Decide if interrupts can be used */ 488 if (ms->irq0 && ms->irq1) { 489 rc = request_irq(ms->irq0, mpc52xx_spi_irq, 0, 490 "mpc5200-spi-modf", ms); 491 rc |= request_irq(ms->irq1, mpc52xx_spi_irq, 0, 492 "mpc5200-spi-spif", ms); 493 if (rc) { 494 free_irq(ms->irq0, ms); 495 free_irq(ms->irq1, ms); 496 ms->irq0 = ms->irq1 = 0; 497 } 498 } else { 499 /* operate in polled mode */ 500 ms->irq0 = ms->irq1 = 0; 501 } 502 503 if (!ms->irq0) 504 dev_info(&op->dev, "using polled mode\n"); 505 506 dev_dbg(&op->dev, "registering spi_master struct\n"); 507 rc = spi_register_master(master); 508 if (rc) 509 goto err_register; 510 511 dev_info(&ms->master->dev, "registered MPC5200 SPI bus\n"); 512 513 return rc; 514 515 err_register: 516 dev_err(&ms->master->dev, "initialization failed\n"); 517 spi_master_put(master); 518 err_gpio: 519 while (i-- > 0) 520 gpio_free(ms->gpio_cs[i]); 521 522 kfree(ms->gpio_cs); 523 err_alloc: 524 err_init: 525 iounmap(regs); 526 return rc; 527 } 528 529 static int __devexit mpc52xx_spi_remove(struct platform_device *op) 530 { 531 struct spi_master *master = dev_get_drvdata(&op->dev); 532 struct mpc52xx_spi *ms = spi_master_get_devdata(master); 533 int i; 534 535 free_irq(ms->irq0, ms); 536 free_irq(ms->irq1, ms); 537 538 for (i = 0; i < ms->gpio_cs_count; i++) 539 gpio_free(ms->gpio_cs[i]); 540 541 kfree(ms->gpio_cs); 542 spi_unregister_master(master); 543 spi_master_put(master); 544 iounmap(ms->regs); 545 546 return 0; 547 } 548 549 static const struct of_device_id mpc52xx_spi_match[] __devinitconst = { 550 { .compatible = "fsl,mpc5200-spi", }, 551 {} 552 }; 553 MODULE_DEVICE_TABLE(of, mpc52xx_spi_match); 554 555 static struct platform_driver mpc52xx_spi_of_driver = { 556 .driver = { 557 .name = "mpc52xx-spi", 558 .owner = THIS_MODULE, 559 .of_match_table = mpc52xx_spi_match, 560 }, 561 .probe = mpc52xx_spi_probe, 562 .remove = __devexit_p(mpc52xx_spi_remove), 563 }; 564 module_platform_driver(mpc52xx_spi_of_driver); 565