xref: /openbmc/linux/drivers/spi/spi-mpc512x-psc.c (revision 7ae5c03a)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * MPC512x PSC in SPI mode driver.
4  *
5  * Copyright (C) 2007,2008 Freescale Semiconductor Inc.
6  * Original port from 52xx driver:
7  *	Hongjun Chen <hong-jun.chen@freescale.com>
8  *
9  * Fork of mpc52xx_psc_spi.c:
10  *	Copyright (C) 2006 TOPTICA Photonics AG., Dragos Carp
11  */
12 
13 #include <linux/module.h>
14 #include <linux/kernel.h>
15 #include <linux/errno.h>
16 #include <linux/interrupt.h>
17 #include <linux/of_address.h>
18 #include <linux/of_irq.h>
19 #include <linux/of_platform.h>
20 #include <linux/completion.h>
21 #include <linux/io.h>
22 #include <linux/delay.h>
23 #include <linux/clk.h>
24 #include <linux/spi/spi.h>
25 #include <linux/fsl_devices.h>
26 #include <asm/mpc52xx_psc.h>
27 
28 enum {
29 	TYPE_MPC5121,
30 	TYPE_MPC5125,
31 };
32 
33 /*
34  * This macro abstracts the differences in the PSC register layout between
35  * MPC5121 (which uses a struct mpc52xx_psc) and MPC5125 (using mpc5125_psc).
36  */
37 #define psc_addr(mps, regname) ({					\
38 	void *__ret = NULL;						\
39 	switch (mps->type) {						\
40 	case TYPE_MPC5121: {						\
41 			struct mpc52xx_psc __iomem *psc = mps->psc;	\
42 			__ret = &psc->regname;				\
43 		};							\
44 		break;							\
45 	case TYPE_MPC5125: {						\
46 			struct mpc5125_psc __iomem *psc = mps->psc;	\
47 			__ret = &psc->regname;				\
48 		};							\
49 		break;							\
50 	}								\
51 	__ret; })
52 
53 struct mpc512x_psc_spi {
54 	void (*cs_control)(struct spi_device *spi, bool on);
55 
56 	/* driver internal data */
57 	int type;
58 	void __iomem *psc;
59 	struct mpc512x_psc_fifo __iomem *fifo;
60 	unsigned int irq;
61 	u8 bits_per_word;
62 	struct clk *clk_mclk;
63 	struct clk *clk_ipg;
64 	u32 mclk_rate;
65 
66 	struct completion txisrdone;
67 };
68 
69 /* controller state */
70 struct mpc512x_psc_spi_cs {
71 	int bits_per_word;
72 	int speed_hz;
73 };
74 
75 /* set clock freq, clock ramp, bits per work
76  * if t is NULL then reset the values to the default values
77  */
78 static int mpc512x_psc_spi_transfer_setup(struct spi_device *spi,
79 					  struct spi_transfer *t)
80 {
81 	struct mpc512x_psc_spi_cs *cs = spi->controller_state;
82 
83 	cs->speed_hz = (t && t->speed_hz)
84 	    ? t->speed_hz : spi->max_speed_hz;
85 	cs->bits_per_word = (t && t->bits_per_word)
86 	    ? t->bits_per_word : spi->bits_per_word;
87 	cs->bits_per_word = ((cs->bits_per_word + 7) / 8) * 8;
88 	return 0;
89 }
90 
91 static void mpc512x_psc_spi_activate_cs(struct spi_device *spi)
92 {
93 	struct mpc512x_psc_spi_cs *cs = spi->controller_state;
94 	struct mpc512x_psc_spi *mps = spi_master_get_devdata(spi->master);
95 	u32 sicr;
96 	u32 ccr;
97 	int speed;
98 	u16 bclkdiv;
99 
100 	sicr = in_be32(psc_addr(mps, sicr));
101 
102 	/* Set clock phase and polarity */
103 	if (spi->mode & SPI_CPHA)
104 		sicr |= 0x00001000;
105 	else
106 		sicr &= ~0x00001000;
107 
108 	if (spi->mode & SPI_CPOL)
109 		sicr |= 0x00002000;
110 	else
111 		sicr &= ~0x00002000;
112 
113 	if (spi->mode & SPI_LSB_FIRST)
114 		sicr |= 0x10000000;
115 	else
116 		sicr &= ~0x10000000;
117 	out_be32(psc_addr(mps, sicr), sicr);
118 
119 	ccr = in_be32(psc_addr(mps, ccr));
120 	ccr &= 0xFF000000;
121 	speed = cs->speed_hz;
122 	if (!speed)
123 		speed = 1000000;	/* default 1MHz */
124 	bclkdiv = (mps->mclk_rate / speed) - 1;
125 
126 	ccr |= (((bclkdiv & 0xff) << 16) | (((bclkdiv >> 8) & 0xff) << 8));
127 	out_be32(psc_addr(mps, ccr), ccr);
128 	mps->bits_per_word = cs->bits_per_word;
129 
130 	if (spi->cs_gpiod) {
131 		if (mps->cs_control)
132 			/* boardfile override */
133 			mps->cs_control(spi, (spi->mode & SPI_CS_HIGH) ? 1 : 0);
134 		else
135 			/* gpiolib will deal with the inversion */
136 			gpiod_set_value(spi->cs_gpiod, 1);
137 	}
138 }
139 
140 static void mpc512x_psc_spi_deactivate_cs(struct spi_device *spi)
141 {
142 	struct mpc512x_psc_spi *mps = spi_master_get_devdata(spi->master);
143 
144 	if (spi->cs_gpiod) {
145 		if (mps->cs_control)
146 			/* boardfile override */
147 			mps->cs_control(spi, (spi->mode & SPI_CS_HIGH) ? 0 : 1);
148 		else
149 			/* gpiolib will deal with the inversion */
150 			gpiod_set_value(spi->cs_gpiod, 0);
151 	}
152 }
153 
154 /* extract and scale size field in txsz or rxsz */
155 #define MPC512x_PSC_FIFO_SZ(sz) ((sz & 0x7ff) << 2);
156 
157 #define EOFBYTE 1
158 
159 static int mpc512x_psc_spi_transfer_rxtx(struct spi_device *spi,
160 					 struct spi_transfer *t)
161 {
162 	struct mpc512x_psc_spi *mps = spi_master_get_devdata(spi->master);
163 	struct mpc512x_psc_fifo __iomem *fifo = mps->fifo;
164 	size_t tx_len = t->len;
165 	size_t rx_len = t->len;
166 	u8 *tx_buf = (u8 *)t->tx_buf;
167 	u8 *rx_buf = (u8 *)t->rx_buf;
168 
169 	if (!tx_buf && !rx_buf && t->len)
170 		return -EINVAL;
171 
172 	while (rx_len || tx_len) {
173 		size_t txcount;
174 		u8 data;
175 		size_t fifosz;
176 		size_t rxcount;
177 		int rxtries;
178 
179 		/*
180 		 * send the TX bytes in as large a chunk as possible
181 		 * but neither exceed the TX nor the RX FIFOs
182 		 */
183 		fifosz = MPC512x_PSC_FIFO_SZ(in_be32(&fifo->txsz));
184 		txcount = min(fifosz, tx_len);
185 		fifosz = MPC512x_PSC_FIFO_SZ(in_be32(&fifo->rxsz));
186 		fifosz -= in_be32(&fifo->rxcnt) + 1;
187 		txcount = min(fifosz, txcount);
188 		if (txcount) {
189 
190 			/* fill the TX FIFO */
191 			while (txcount-- > 0) {
192 				data = tx_buf ? *tx_buf++ : 0;
193 				if (tx_len == EOFBYTE && t->cs_change)
194 					setbits32(&fifo->txcmd,
195 						  MPC512x_PSC_FIFO_EOF);
196 				out_8(&fifo->txdata_8, data);
197 				tx_len--;
198 			}
199 
200 			/* have the ISR trigger when the TX FIFO is empty */
201 			reinit_completion(&mps->txisrdone);
202 			out_be32(&fifo->txisr, MPC512x_PSC_FIFO_EMPTY);
203 			out_be32(&fifo->tximr, MPC512x_PSC_FIFO_EMPTY);
204 			wait_for_completion(&mps->txisrdone);
205 		}
206 
207 		/*
208 		 * consume as much RX data as the FIFO holds, while we
209 		 * iterate over the transfer's TX data length
210 		 *
211 		 * only insist in draining all the remaining RX bytes
212 		 * when the TX bytes were exhausted (that's at the very
213 		 * end of this transfer, not when still iterating over
214 		 * the transfer's chunks)
215 		 */
216 		rxtries = 50;
217 		do {
218 
219 			/*
220 			 * grab whatever was in the FIFO when we started
221 			 * looking, don't bother fetching what was added to
222 			 * the FIFO while we read from it -- we'll return
223 			 * here eventually and prefer sending out remaining
224 			 * TX data
225 			 */
226 			fifosz = in_be32(&fifo->rxcnt);
227 			rxcount = min(fifosz, rx_len);
228 			while (rxcount-- > 0) {
229 				data = in_8(&fifo->rxdata_8);
230 				if (rx_buf)
231 					*rx_buf++ = data;
232 				rx_len--;
233 			}
234 
235 			/*
236 			 * come back later if there still is TX data to send,
237 			 * bail out of the RX drain loop if all of the TX data
238 			 * was sent and all of the RX data was received (i.e.
239 			 * when the transmission has completed)
240 			 */
241 			if (tx_len)
242 				break;
243 			if (!rx_len)
244 				break;
245 
246 			/*
247 			 * TX data transmission has completed while RX data
248 			 * is still pending -- that's a transient situation
249 			 * which depends on wire speed and specific
250 			 * hardware implementation details (buffering) yet
251 			 * should resolve very quickly
252 			 *
253 			 * just yield for a moment to not hog the CPU for
254 			 * too long when running SPI at low speed
255 			 *
256 			 * the timeout range is rather arbitrary and tries
257 			 * to balance throughput against system load; the
258 			 * chosen values result in a minimal timeout of 50
259 			 * times 10us and thus work at speeds as low as
260 			 * some 20kbps, while the maximum timeout at the
261 			 * transfer's end could be 5ms _if_ nothing else
262 			 * ticks in the system _and_ RX data still wasn't
263 			 * received, which only occurs in situations that
264 			 * are exceptional; removing the unpredictability
265 			 * of the timeout either decreases throughput
266 			 * (longer timeouts), or puts more load on the
267 			 * system (fixed short timeouts) or requires the
268 			 * use of a timeout API instead of a counter and an
269 			 * unknown inner delay
270 			 */
271 			usleep_range(10, 100);
272 
273 		} while (--rxtries > 0);
274 		if (!tx_len && rx_len && !rxtries) {
275 			/*
276 			 * not enough RX bytes even after several retries
277 			 * and the resulting rather long timeout?
278 			 */
279 			rxcount = in_be32(&fifo->rxcnt);
280 			dev_warn(&spi->dev,
281 				 "short xfer, missing %zd RX bytes, FIFO level %zd\n",
282 				 rx_len, rxcount);
283 		}
284 
285 		/*
286 		 * drain and drop RX data which "should not be there" in
287 		 * the first place, for undisturbed transmission this turns
288 		 * into a NOP (except for the FIFO level fetch)
289 		 */
290 		if (!tx_len && !rx_len) {
291 			while (in_be32(&fifo->rxcnt))
292 				in_8(&fifo->rxdata_8);
293 		}
294 
295 	}
296 	return 0;
297 }
298 
299 static int mpc512x_psc_spi_msg_xfer(struct spi_master *master,
300 				    struct spi_message *m)
301 {
302 	struct spi_device *spi;
303 	unsigned cs_change;
304 	int status;
305 	struct spi_transfer *t;
306 
307 	spi = m->spi;
308 	cs_change = 1;
309 	status = 0;
310 	list_for_each_entry(t, &m->transfers, transfer_list) {
311 		status = mpc512x_psc_spi_transfer_setup(spi, t);
312 		if (status < 0)
313 			break;
314 
315 		if (cs_change)
316 			mpc512x_psc_spi_activate_cs(spi);
317 		cs_change = t->cs_change;
318 
319 		status = mpc512x_psc_spi_transfer_rxtx(spi, t);
320 		if (status)
321 			break;
322 		m->actual_length += t->len;
323 
324 		spi_transfer_delay_exec(t);
325 
326 		if (cs_change)
327 			mpc512x_psc_spi_deactivate_cs(spi);
328 	}
329 
330 	m->status = status;
331 	if (m->complete)
332 		m->complete(m->context);
333 
334 	if (status || !cs_change)
335 		mpc512x_psc_spi_deactivate_cs(spi);
336 
337 	mpc512x_psc_spi_transfer_setup(spi, NULL);
338 
339 	spi_finalize_current_message(master);
340 	return status;
341 }
342 
343 static int mpc512x_psc_spi_prep_xfer_hw(struct spi_master *master)
344 {
345 	struct mpc512x_psc_spi *mps = spi_master_get_devdata(master);
346 
347 	dev_dbg(&master->dev, "%s()\n", __func__);
348 
349 	/* Zero MR2 */
350 	in_8(psc_addr(mps, mr2));
351 	out_8(psc_addr(mps, mr2), 0x0);
352 
353 	/* enable transmitter/receiver */
354 	out_8(psc_addr(mps, command), MPC52xx_PSC_TX_ENABLE | MPC52xx_PSC_RX_ENABLE);
355 
356 	return 0;
357 }
358 
359 static int mpc512x_psc_spi_unprep_xfer_hw(struct spi_master *master)
360 {
361 	struct mpc512x_psc_spi *mps = spi_master_get_devdata(master);
362 	struct mpc512x_psc_fifo __iomem *fifo = mps->fifo;
363 
364 	dev_dbg(&master->dev, "%s()\n", __func__);
365 
366 	/* disable transmitter/receiver and fifo interrupt */
367 	out_8(psc_addr(mps, command), MPC52xx_PSC_TX_DISABLE | MPC52xx_PSC_RX_DISABLE);
368 	out_be32(&fifo->tximr, 0);
369 
370 	return 0;
371 }
372 
373 static int mpc512x_psc_spi_setup(struct spi_device *spi)
374 {
375 	struct mpc512x_psc_spi_cs *cs = spi->controller_state;
376 
377 	if (spi->bits_per_word % 8)
378 		return -EINVAL;
379 
380 	if (!cs) {
381 		cs = kzalloc(sizeof(*cs), GFP_KERNEL);
382 		if (!cs)
383 			return -ENOMEM;
384 
385 		spi->controller_state = cs;
386 	}
387 
388 	cs->bits_per_word = spi->bits_per_word;
389 	cs->speed_hz = spi->max_speed_hz;
390 
391 	return 0;
392 }
393 
394 static void mpc512x_psc_spi_cleanup(struct spi_device *spi)
395 {
396 	kfree(spi->controller_state);
397 }
398 
399 static int mpc512x_psc_spi_port_config(struct spi_master *master,
400 				       struct mpc512x_psc_spi *mps)
401 {
402 	struct mpc512x_psc_fifo __iomem *fifo = mps->fifo;
403 	u32 sicr;
404 	u32 ccr;
405 	int speed;
406 	u16 bclkdiv;
407 
408 	/* Reset the PSC into a known state */
409 	out_8(psc_addr(mps, command), MPC52xx_PSC_RST_RX);
410 	out_8(psc_addr(mps, command), MPC52xx_PSC_RST_TX);
411 	out_8(psc_addr(mps, command), MPC52xx_PSC_TX_DISABLE | MPC52xx_PSC_RX_DISABLE);
412 
413 	/* Disable psc interrupts all useful interrupts are in fifo */
414 	out_be16(psc_addr(mps, isr_imr.imr), 0);
415 
416 	/* Disable fifo interrupts, will be enabled later */
417 	out_be32(&fifo->tximr, 0);
418 	out_be32(&fifo->rximr, 0);
419 
420 	/* Setup fifo slice address and size */
421 	/*out_be32(&fifo->txsz, 0x0fe00004);*/
422 	/*out_be32(&fifo->rxsz, 0x0ff00004);*/
423 
424 	sicr =	0x01000000 |	/* SIM = 0001 -- 8 bit */
425 		0x00800000 |	/* GenClk = 1 -- internal clk */
426 		0x00008000 |	/* SPI = 1 */
427 		0x00004000 |	/* MSTR = 1   -- SPI master */
428 		0x00000800;	/* UseEOF = 1 -- SS low until EOF */
429 
430 	out_be32(psc_addr(mps, sicr), sicr);
431 
432 	ccr = in_be32(psc_addr(mps, ccr));
433 	ccr &= 0xFF000000;
434 	speed = 1000000;	/* default 1MHz */
435 	bclkdiv = (mps->mclk_rate / speed) - 1;
436 	ccr |= (((bclkdiv & 0xff) << 16) | (((bclkdiv >> 8) & 0xff) << 8));
437 	out_be32(psc_addr(mps, ccr), ccr);
438 
439 	/* Set 2ms DTL delay */
440 	out_8(psc_addr(mps, ctur), 0x00);
441 	out_8(psc_addr(mps, ctlr), 0x82);
442 
443 	/* we don't use the alarms */
444 	out_be32(&fifo->rxalarm, 0xfff);
445 	out_be32(&fifo->txalarm, 0);
446 
447 	/* Enable FIFO slices for Rx/Tx */
448 	out_be32(&fifo->rxcmd,
449 		 MPC512x_PSC_FIFO_ENABLE_SLICE | MPC512x_PSC_FIFO_ENABLE_DMA);
450 	out_be32(&fifo->txcmd,
451 		 MPC512x_PSC_FIFO_ENABLE_SLICE | MPC512x_PSC_FIFO_ENABLE_DMA);
452 
453 	mps->bits_per_word = 8;
454 
455 	return 0;
456 }
457 
458 static irqreturn_t mpc512x_psc_spi_isr(int irq, void *dev_id)
459 {
460 	struct mpc512x_psc_spi *mps = (struct mpc512x_psc_spi *)dev_id;
461 	struct mpc512x_psc_fifo __iomem *fifo = mps->fifo;
462 
463 	/* clear interrupt and wake up the rx/tx routine */
464 	if (in_be32(&fifo->txisr) &
465 	    in_be32(&fifo->tximr) & MPC512x_PSC_FIFO_EMPTY) {
466 		out_be32(&fifo->txisr, MPC512x_PSC_FIFO_EMPTY);
467 		out_be32(&fifo->tximr, 0);
468 		complete(&mps->txisrdone);
469 		return IRQ_HANDLED;
470 	}
471 	return IRQ_NONE;
472 }
473 
474 static int mpc512x_psc_spi_do_probe(struct device *dev, u32 regaddr,
475 					      u32 size, unsigned int irq)
476 {
477 	struct fsl_spi_platform_data *pdata = dev_get_platdata(dev);
478 	struct mpc512x_psc_spi *mps;
479 	struct spi_master *master;
480 	int ret;
481 	void *tempp;
482 	struct clk *clk;
483 
484 	master = spi_alloc_master(dev, sizeof(*mps));
485 	if (master == NULL)
486 		return -ENOMEM;
487 
488 	dev_set_drvdata(dev, master);
489 	mps = spi_master_get_devdata(master);
490 	mps->type = (int)of_device_get_match_data(dev);
491 	mps->irq = irq;
492 
493 	if (pdata) {
494 		mps->cs_control = pdata->cs_control;
495 		master->bus_num = pdata->bus_num;
496 		master->num_chipselect = pdata->max_chipselect;
497 	}
498 
499 	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST;
500 	master->setup = mpc512x_psc_spi_setup;
501 	master->prepare_transfer_hardware = mpc512x_psc_spi_prep_xfer_hw;
502 	master->transfer_one_message = mpc512x_psc_spi_msg_xfer;
503 	master->unprepare_transfer_hardware = mpc512x_psc_spi_unprep_xfer_hw;
504 	master->use_gpio_descriptors = true;
505 	master->cleanup = mpc512x_psc_spi_cleanup;
506 	master->dev.of_node = dev->of_node;
507 
508 	tempp = devm_ioremap(dev, regaddr, size);
509 	if (!tempp) {
510 		dev_err(dev, "could not ioremap I/O port range\n");
511 		ret = -EFAULT;
512 		goto free_master;
513 	}
514 	mps->psc = tempp;
515 	mps->fifo =
516 		(struct mpc512x_psc_fifo *)(tempp + sizeof(struct mpc52xx_psc));
517 	ret = devm_request_irq(dev, mps->irq, mpc512x_psc_spi_isr, IRQF_SHARED,
518 				"mpc512x-psc-spi", mps);
519 	if (ret)
520 		goto free_master;
521 	init_completion(&mps->txisrdone);
522 
523 	clk = devm_clk_get(dev, "mclk");
524 	if (IS_ERR(clk)) {
525 		ret = PTR_ERR(clk);
526 		goto free_master;
527 	}
528 	ret = clk_prepare_enable(clk);
529 	if (ret)
530 		goto free_master;
531 	mps->clk_mclk = clk;
532 	mps->mclk_rate = clk_get_rate(clk);
533 
534 	clk = devm_clk_get(dev, "ipg");
535 	if (IS_ERR(clk)) {
536 		ret = PTR_ERR(clk);
537 		goto free_mclk_clock;
538 	}
539 	ret = clk_prepare_enable(clk);
540 	if (ret)
541 		goto free_mclk_clock;
542 	mps->clk_ipg = clk;
543 
544 	ret = mpc512x_psc_spi_port_config(master, mps);
545 	if (ret < 0)
546 		goto free_ipg_clock;
547 
548 	ret = devm_spi_register_master(dev, master);
549 	if (ret < 0)
550 		goto free_ipg_clock;
551 
552 	return ret;
553 
554 free_ipg_clock:
555 	clk_disable_unprepare(mps->clk_ipg);
556 free_mclk_clock:
557 	clk_disable_unprepare(mps->clk_mclk);
558 free_master:
559 	spi_master_put(master);
560 
561 	return ret;
562 }
563 
564 static int mpc512x_psc_spi_do_remove(struct device *dev)
565 {
566 	struct spi_master *master = dev_get_drvdata(dev);
567 	struct mpc512x_psc_spi *mps = spi_master_get_devdata(master);
568 
569 	clk_disable_unprepare(mps->clk_mclk);
570 	clk_disable_unprepare(mps->clk_ipg);
571 
572 	return 0;
573 }
574 
575 static int mpc512x_psc_spi_of_probe(struct platform_device *op)
576 {
577 	const u32 *regaddr_p;
578 	u64 regaddr64, size64;
579 
580 	regaddr_p = of_get_address(op->dev.of_node, 0, &size64, NULL);
581 	if (!regaddr_p) {
582 		dev_err(&op->dev, "Invalid PSC address\n");
583 		return -EINVAL;
584 	}
585 	regaddr64 = of_translate_address(op->dev.of_node, regaddr_p);
586 
587 	return mpc512x_psc_spi_do_probe(&op->dev, (u32) regaddr64, (u32) size64,
588 				irq_of_parse_and_map(op->dev.of_node, 0));
589 }
590 
591 static int mpc512x_psc_spi_of_remove(struct platform_device *op)
592 {
593 	return mpc512x_psc_spi_do_remove(&op->dev);
594 }
595 
596 static const struct of_device_id mpc512x_psc_spi_of_match[] = {
597 	{ .compatible = "fsl,mpc5121-psc-spi", .data = (void *)TYPE_MPC5121 },
598 	{ .compatible = "fsl,mpc5125-psc-spi", .data = (void *)TYPE_MPC5125 },
599 	{},
600 };
601 
602 MODULE_DEVICE_TABLE(of, mpc512x_psc_spi_of_match);
603 
604 static struct platform_driver mpc512x_psc_spi_of_driver = {
605 	.probe = mpc512x_psc_spi_of_probe,
606 	.remove = mpc512x_psc_spi_of_remove,
607 	.driver = {
608 		.name = "mpc512x-psc-spi",
609 		.of_match_table = mpc512x_psc_spi_of_match,
610 	},
611 };
612 module_platform_driver(mpc512x_psc_spi_of_driver);
613 
614 MODULE_AUTHOR("John Rigby");
615 MODULE_DESCRIPTION("MPC512x PSC SPI Driver");
616 MODULE_LICENSE("GPL");
617