1 // SPDX-License-Identifier: (GPL-2.0) 2 /* 3 * Microchip CoreSPI SPI controller driver 4 * 5 * Copyright (c) 2018-2022 Microchip Technology Inc. and its subsidiaries 6 * 7 * Author: Daire McNamara <daire.mcnamara@microchip.com> 8 * Author: Conor Dooley <conor.dooley@microchip.com> 9 * 10 */ 11 12 #include <linux/clk.h> 13 #include <linux/delay.h> 14 #include <linux/err.h> 15 #include <linux/init.h> 16 #include <linux/interrupt.h> 17 #include <linux/io.h> 18 #include <linux/module.h> 19 #include <linux/of.h> 20 #include <linux/platform_device.h> 21 #include <linux/spi/spi.h> 22 23 #define MAX_LEN (0xffff) 24 #define MAX_CS (8) 25 #define DEFAULT_FRAMESIZE (8) 26 #define FIFO_DEPTH (32) 27 #define CLK_GEN_MODE1_MAX (255) 28 #define CLK_GEN_MODE0_MAX (15) 29 #define CLK_GEN_MIN (0) 30 #define MODE_X_MASK_SHIFT (24) 31 32 #define CONTROL_ENABLE BIT(0) 33 #define CONTROL_MASTER BIT(1) 34 #define CONTROL_RX_DATA_INT BIT(4) 35 #define CONTROL_TX_DATA_INT BIT(5) 36 #define CONTROL_RX_OVER_INT BIT(6) 37 #define CONTROL_TX_UNDER_INT BIT(7) 38 #define CONTROL_SPO BIT(24) 39 #define CONTROL_SPH BIT(25) 40 #define CONTROL_SPS BIT(26) 41 #define CONTROL_FRAMEURUN BIT(27) 42 #define CONTROL_CLKMODE BIT(28) 43 #define CONTROL_BIGFIFO BIT(29) 44 #define CONTROL_OENOFF BIT(30) 45 #define CONTROL_RESET BIT(31) 46 47 #define CONTROL_MODE_MASK GENMASK(3, 2) 48 #define MOTOROLA_MODE (0) 49 #define CONTROL_FRAMECNT_MASK GENMASK(23, 8) 50 #define CONTROL_FRAMECNT_SHIFT (8) 51 52 #define STATUS_ACTIVE BIT(14) 53 #define STATUS_SSEL BIT(13) 54 #define STATUS_FRAMESTART BIT(12) 55 #define STATUS_TXFIFO_EMPTY_NEXT_READ BIT(11) 56 #define STATUS_TXFIFO_EMPTY BIT(10) 57 #define STATUS_TXFIFO_FULL_NEXT_WRITE BIT(9) 58 #define STATUS_TXFIFO_FULL BIT(8) 59 #define STATUS_RXFIFO_EMPTY_NEXT_READ BIT(7) 60 #define STATUS_RXFIFO_EMPTY BIT(6) 61 #define STATUS_RXFIFO_FULL_NEXT_WRITE BIT(5) 62 #define STATUS_RXFIFO_FULL BIT(4) 63 #define STATUS_TX_UNDERRUN BIT(3) 64 #define STATUS_RX_OVERFLOW BIT(2) 65 #define STATUS_RXDAT_RXED BIT(1) 66 #define STATUS_TXDAT_SENT BIT(0) 67 68 #define INT_TXDONE BIT(0) 69 #define INT_RXRDY BIT(1) 70 #define INT_RX_CHANNEL_OVERFLOW BIT(2) 71 #define INT_TX_CHANNEL_UNDERRUN BIT(3) 72 73 #define INT_ENABLE_MASK (CONTROL_RX_DATA_INT | CONTROL_TX_DATA_INT | \ 74 CONTROL_RX_OVER_INT | CONTROL_TX_UNDER_INT) 75 76 #define REG_CONTROL (0x00) 77 #define REG_FRAME_SIZE (0x04) 78 #define REG_STATUS (0x08) 79 #define REG_INT_CLEAR (0x0c) 80 #define REG_RX_DATA (0x10) 81 #define REG_TX_DATA (0x14) 82 #define REG_CLK_GEN (0x18) 83 #define REG_SLAVE_SELECT (0x1c) 84 #define SSEL_MASK GENMASK(7, 0) 85 #define SSEL_DIRECT BIT(8) 86 #define SSELOUT_SHIFT 9 87 #define SSELOUT BIT(SSELOUT_SHIFT) 88 #define REG_MIS (0x20) 89 #define REG_RIS (0x24) 90 #define REG_CONTROL2 (0x28) 91 #define REG_COMMAND (0x2c) 92 #define REG_PKTSIZE (0x30) 93 #define REG_CMD_SIZE (0x34) 94 #define REG_HWSTATUS (0x38) 95 #define REG_STAT8 (0x3c) 96 #define REG_CTRL2 (0x48) 97 #define REG_FRAMESUP (0x50) 98 99 struct mchp_corespi { 100 void __iomem *regs; 101 struct clk *clk; 102 const u8 *tx_buf; 103 u8 *rx_buf; 104 u32 clk_gen; /* divider for spi output clock generated by the controller */ 105 u32 clk_mode; 106 int irq; 107 int tx_len; 108 int rx_len; 109 int pending; 110 }; 111 112 static inline u32 mchp_corespi_read(struct mchp_corespi *spi, unsigned int reg) 113 { 114 return readl(spi->regs + reg); 115 } 116 117 static inline void mchp_corespi_write(struct mchp_corespi *spi, unsigned int reg, u32 val) 118 { 119 writel(val, spi->regs + reg); 120 } 121 122 static inline void mchp_corespi_disable(struct mchp_corespi *spi) 123 { 124 u32 control = mchp_corespi_read(spi, REG_CONTROL); 125 126 control &= ~CONTROL_ENABLE; 127 128 mchp_corespi_write(spi, REG_CONTROL, control); 129 } 130 131 static inline void mchp_corespi_read_fifo(struct mchp_corespi *spi) 132 { 133 u8 data; 134 int fifo_max, i = 0; 135 136 fifo_max = min(spi->rx_len, FIFO_DEPTH); 137 138 while ((i < fifo_max) && !(mchp_corespi_read(spi, REG_STATUS) & STATUS_RXFIFO_EMPTY)) { 139 data = mchp_corespi_read(spi, REG_RX_DATA); 140 141 if (spi->rx_buf) 142 *spi->rx_buf++ = data; 143 i++; 144 } 145 spi->rx_len -= i; 146 spi->pending -= i; 147 } 148 149 static void mchp_corespi_enable_ints(struct mchp_corespi *spi) 150 { 151 u32 control, mask = INT_ENABLE_MASK; 152 153 mchp_corespi_disable(spi); 154 155 control = mchp_corespi_read(spi, REG_CONTROL); 156 157 control |= mask; 158 mchp_corespi_write(spi, REG_CONTROL, control); 159 160 control |= CONTROL_ENABLE; 161 mchp_corespi_write(spi, REG_CONTROL, control); 162 } 163 164 static void mchp_corespi_disable_ints(struct mchp_corespi *spi) 165 { 166 u32 control, mask = INT_ENABLE_MASK; 167 168 mchp_corespi_disable(spi); 169 170 control = mchp_corespi_read(spi, REG_CONTROL); 171 control &= ~mask; 172 mchp_corespi_write(spi, REG_CONTROL, control); 173 174 control |= CONTROL_ENABLE; 175 mchp_corespi_write(spi, REG_CONTROL, control); 176 } 177 178 static inline void mchp_corespi_set_xfer_size(struct mchp_corespi *spi, int len) 179 { 180 u32 control; 181 u16 lenpart; 182 183 /* 184 * Disable the SPI controller. Writes to transfer length have 185 * no effect when the controller is enabled. 186 */ 187 mchp_corespi_disable(spi); 188 189 /* 190 * The lower 16 bits of the frame count are stored in the control reg 191 * for legacy reasons, but the upper 16 written to a different register: 192 * FRAMESUP. While both the upper and lower bits can be *READ* from the 193 * FRAMESUP register, writing to the lower 16 bits is a NOP 194 */ 195 lenpart = len & 0xffff; 196 197 control = mchp_corespi_read(spi, REG_CONTROL); 198 control &= ~CONTROL_FRAMECNT_MASK; 199 control |= lenpart << CONTROL_FRAMECNT_SHIFT; 200 mchp_corespi_write(spi, REG_CONTROL, control); 201 202 lenpart = len & 0xffff0000; 203 mchp_corespi_write(spi, REG_FRAMESUP, lenpart); 204 205 control |= CONTROL_ENABLE; 206 mchp_corespi_write(spi, REG_CONTROL, control); 207 } 208 209 static inline void mchp_corespi_write_fifo(struct mchp_corespi *spi) 210 { 211 u8 byte; 212 int fifo_max, i = 0; 213 214 fifo_max = min(spi->tx_len, FIFO_DEPTH); 215 mchp_corespi_set_xfer_size(spi, fifo_max); 216 217 while ((i < fifo_max) && !(mchp_corespi_read(spi, REG_STATUS) & STATUS_TXFIFO_FULL)) { 218 byte = spi->tx_buf ? *spi->tx_buf++ : 0xaa; 219 mchp_corespi_write(spi, REG_TX_DATA, byte); 220 i++; 221 } 222 223 spi->tx_len -= i; 224 spi->pending += i; 225 } 226 227 static inline void mchp_corespi_set_framesize(struct mchp_corespi *spi, int bt) 228 { 229 u32 control; 230 231 /* 232 * Disable the SPI controller. Writes to the frame size have 233 * no effect when the controller is enabled. 234 */ 235 mchp_corespi_disable(spi); 236 237 mchp_corespi_write(spi, REG_FRAME_SIZE, bt); 238 239 control = mchp_corespi_read(spi, REG_CONTROL); 240 control |= CONTROL_ENABLE; 241 mchp_corespi_write(spi, REG_CONTROL, control); 242 } 243 244 static void mchp_corespi_set_cs(struct spi_device *spi, bool disable) 245 { 246 u32 reg; 247 struct mchp_corespi *corespi = spi_master_get_devdata(spi->master); 248 249 reg = mchp_corespi_read(corespi, REG_SLAVE_SELECT); 250 reg &= ~BIT(spi_get_chipselect(spi, 0)); 251 reg |= !disable << spi_get_chipselect(spi, 0); 252 253 mchp_corespi_write(corespi, REG_SLAVE_SELECT, reg); 254 } 255 256 static int mchp_corespi_setup(struct spi_device *spi) 257 { 258 struct mchp_corespi *corespi = spi_master_get_devdata(spi->master); 259 u32 reg; 260 261 /* 262 * Active high slaves need to be specifically set to their inactive 263 * states during probe by adding them to the "control group" & thus 264 * driving their select line low. 265 */ 266 if (spi->mode & SPI_CS_HIGH) { 267 reg = mchp_corespi_read(corespi, REG_SLAVE_SELECT); 268 reg |= BIT(spi_get_chipselect(spi, 0)); 269 mchp_corespi_write(corespi, REG_SLAVE_SELECT, reg); 270 } 271 return 0; 272 } 273 274 static void mchp_corespi_init(struct spi_master *master, struct mchp_corespi *spi) 275 { 276 unsigned long clk_hz; 277 u32 control = mchp_corespi_read(spi, REG_CONTROL); 278 279 control |= CONTROL_MASTER; 280 281 control &= ~CONTROL_MODE_MASK; 282 control |= MOTOROLA_MODE; 283 284 mchp_corespi_set_framesize(spi, DEFAULT_FRAMESIZE); 285 286 /* max. possible spi clock rate is the apb clock rate */ 287 clk_hz = clk_get_rate(spi->clk); 288 master->max_speed_hz = clk_hz; 289 290 /* 291 * The controller must be configured so that it doesn't remove Chip 292 * Select until the entire message has been transferred, even if at 293 * some points TX FIFO becomes empty. 294 * 295 * BIGFIFO mode is also enabled, which sets the fifo depth to 32 frames 296 * for the 8 bit transfers that this driver uses. 297 */ 298 control = mchp_corespi_read(spi, REG_CONTROL); 299 control |= CONTROL_SPS | CONTROL_BIGFIFO; 300 301 mchp_corespi_write(spi, REG_CONTROL, control); 302 303 mchp_corespi_enable_ints(spi); 304 305 /* 306 * It is required to enable direct mode, otherwise control over the chip 307 * select is relinquished to the hardware. SSELOUT is enabled too so we 308 * can deal with active high slaves. 309 */ 310 mchp_corespi_write(spi, REG_SLAVE_SELECT, SSELOUT | SSEL_DIRECT); 311 312 control = mchp_corespi_read(spi, REG_CONTROL); 313 314 control &= ~CONTROL_RESET; 315 control |= CONTROL_ENABLE; 316 317 mchp_corespi_write(spi, REG_CONTROL, control); 318 } 319 320 static inline void mchp_corespi_set_clk_gen(struct mchp_corespi *spi) 321 { 322 u32 control; 323 324 mchp_corespi_disable(spi); 325 326 control = mchp_corespi_read(spi, REG_CONTROL); 327 if (spi->clk_mode) 328 control |= CONTROL_CLKMODE; 329 else 330 control &= ~CONTROL_CLKMODE; 331 332 mchp_corespi_write(spi, REG_CLK_GEN, spi->clk_gen); 333 mchp_corespi_write(spi, REG_CONTROL, control); 334 mchp_corespi_write(spi, REG_CONTROL, control | CONTROL_ENABLE); 335 } 336 337 static inline void mchp_corespi_set_mode(struct mchp_corespi *spi, unsigned int mode) 338 { 339 u32 control, mode_val; 340 341 switch (mode & SPI_MODE_X_MASK) { 342 case SPI_MODE_0: 343 mode_val = 0; 344 break; 345 case SPI_MODE_1: 346 mode_val = CONTROL_SPH; 347 break; 348 case SPI_MODE_2: 349 mode_val = CONTROL_SPO; 350 break; 351 case SPI_MODE_3: 352 mode_val = CONTROL_SPH | CONTROL_SPO; 353 break; 354 } 355 356 /* 357 * Disable the SPI controller. Writes to the frame size have 358 * no effect when the controller is enabled. 359 */ 360 mchp_corespi_disable(spi); 361 362 control = mchp_corespi_read(spi, REG_CONTROL); 363 control &= ~(SPI_MODE_X_MASK << MODE_X_MASK_SHIFT); 364 control |= mode_val; 365 366 mchp_corespi_write(spi, REG_CONTROL, control); 367 368 control |= CONTROL_ENABLE; 369 mchp_corespi_write(spi, REG_CONTROL, control); 370 } 371 372 static irqreturn_t mchp_corespi_interrupt(int irq, void *dev_id) 373 { 374 struct spi_master *master = dev_id; 375 struct mchp_corespi *spi = spi_master_get_devdata(master); 376 u32 intfield = mchp_corespi_read(spi, REG_MIS) & 0xf; 377 bool finalise = false; 378 379 /* Interrupt line may be shared and not for us at all */ 380 if (intfield == 0) 381 return IRQ_NONE; 382 383 if (intfield & INT_TXDONE) { 384 mchp_corespi_write(spi, REG_INT_CLEAR, INT_TXDONE); 385 386 if (spi->rx_len) 387 mchp_corespi_read_fifo(spi); 388 389 if (spi->tx_len) 390 mchp_corespi_write_fifo(spi); 391 392 if (!spi->rx_len) 393 finalise = true; 394 } 395 396 if (intfield & INT_RXRDY) 397 mchp_corespi_write(spi, REG_INT_CLEAR, INT_RXRDY); 398 399 if (intfield & INT_RX_CHANNEL_OVERFLOW) { 400 mchp_corespi_write(spi, REG_INT_CLEAR, INT_RX_CHANNEL_OVERFLOW); 401 finalise = true; 402 dev_err(&master->dev, 403 "%s: RX OVERFLOW: rxlen: %d, txlen: %d\n", __func__, 404 spi->rx_len, spi->tx_len); 405 } 406 407 if (intfield & INT_TX_CHANNEL_UNDERRUN) { 408 mchp_corespi_write(spi, REG_INT_CLEAR, INT_TX_CHANNEL_UNDERRUN); 409 finalise = true; 410 dev_err(&master->dev, 411 "%s: TX UNDERFLOW: rxlen: %d, txlen: %d\n", __func__, 412 spi->rx_len, spi->tx_len); 413 } 414 415 if (finalise) 416 spi_finalize_current_transfer(master); 417 418 return IRQ_HANDLED; 419 } 420 421 static int mchp_corespi_calculate_clkgen(struct mchp_corespi *spi, 422 unsigned long target_hz) 423 { 424 unsigned long clk_hz, spi_hz, clk_gen; 425 426 clk_hz = clk_get_rate(spi->clk); 427 if (!clk_hz) 428 return -EINVAL; 429 spi_hz = min(target_hz, clk_hz); 430 431 /* 432 * There are two possible clock modes for the controller generated 433 * clock's division ratio: 434 * CLK_MODE = 0: 1 / (2^(CLK_GEN + 1)) where CLK_GEN = 0 to 15. 435 * CLK_MODE = 1: 1 / (2 * CLK_GEN + 1) where CLK_GEN = 0 to 255. 436 * First try mode 1, fall back to 0 and if we have tried both modes and 437 * we /still/ can't get a good setting, we then throw the toys out of 438 * the pram and give up 439 * clk_gen is the register name for the clock divider on MPFS. 440 */ 441 clk_gen = DIV_ROUND_UP(clk_hz, 2 * spi_hz) - 1; 442 if (clk_gen > CLK_GEN_MODE1_MAX || clk_gen <= CLK_GEN_MIN) { 443 clk_gen = DIV_ROUND_UP(clk_hz, spi_hz); 444 clk_gen = fls(clk_gen) - 1; 445 446 if (clk_gen > CLK_GEN_MODE0_MAX) 447 return -EINVAL; 448 449 spi->clk_mode = 0; 450 } else { 451 spi->clk_mode = 1; 452 } 453 454 spi->clk_gen = clk_gen; 455 return 0; 456 } 457 458 static int mchp_corespi_transfer_one(struct spi_master *master, 459 struct spi_device *spi_dev, 460 struct spi_transfer *xfer) 461 { 462 struct mchp_corespi *spi = spi_master_get_devdata(master); 463 int ret; 464 465 ret = mchp_corespi_calculate_clkgen(spi, (unsigned long)xfer->speed_hz); 466 if (ret) { 467 dev_err(&master->dev, "failed to set clk_gen for target %u Hz\n", xfer->speed_hz); 468 return ret; 469 } 470 471 mchp_corespi_set_clk_gen(spi); 472 473 spi->tx_buf = xfer->tx_buf; 474 spi->rx_buf = xfer->rx_buf; 475 spi->tx_len = xfer->len; 476 spi->rx_len = xfer->len; 477 spi->pending = 0; 478 479 mchp_corespi_set_xfer_size(spi, (spi->tx_len > FIFO_DEPTH) 480 ? FIFO_DEPTH : spi->tx_len); 481 482 if (spi->tx_len) 483 mchp_corespi_write_fifo(spi); 484 return 1; 485 } 486 487 static int mchp_corespi_prepare_message(struct spi_master *master, 488 struct spi_message *msg) 489 { 490 struct spi_device *spi_dev = msg->spi; 491 struct mchp_corespi *spi = spi_master_get_devdata(master); 492 493 mchp_corespi_set_framesize(spi, DEFAULT_FRAMESIZE); 494 mchp_corespi_set_mode(spi, spi_dev->mode); 495 496 return 0; 497 } 498 499 static int mchp_corespi_probe(struct platform_device *pdev) 500 { 501 struct spi_master *master; 502 struct mchp_corespi *spi; 503 struct resource *res; 504 u32 num_cs; 505 int ret = 0; 506 507 master = devm_spi_alloc_master(&pdev->dev, sizeof(*spi)); 508 if (!master) 509 return dev_err_probe(&pdev->dev, -ENOMEM, 510 "unable to allocate master for SPI controller\n"); 511 512 platform_set_drvdata(pdev, master); 513 514 if (of_property_read_u32(pdev->dev.of_node, "num-cs", &num_cs)) 515 num_cs = MAX_CS; 516 517 master->num_chipselect = num_cs; 518 master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; 519 master->setup = mchp_corespi_setup; 520 master->bits_per_word_mask = SPI_BPW_MASK(8); 521 master->transfer_one = mchp_corespi_transfer_one; 522 master->prepare_message = mchp_corespi_prepare_message; 523 master->set_cs = mchp_corespi_set_cs; 524 master->dev.of_node = pdev->dev.of_node; 525 526 spi = spi_master_get_devdata(master); 527 528 spi->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res); 529 if (IS_ERR(spi->regs)) 530 return PTR_ERR(spi->regs); 531 532 spi->irq = platform_get_irq(pdev, 0); 533 if (spi->irq <= 0) 534 return dev_err_probe(&pdev->dev, -ENXIO, 535 "invalid IRQ %d for SPI controller\n", 536 spi->irq); 537 538 ret = devm_request_irq(&pdev->dev, spi->irq, mchp_corespi_interrupt, 539 IRQF_SHARED, dev_name(&pdev->dev), master); 540 if (ret) 541 return dev_err_probe(&pdev->dev, ret, 542 "could not request irq\n"); 543 544 spi->clk = devm_clk_get(&pdev->dev, NULL); 545 if (IS_ERR(spi->clk)) 546 return dev_err_probe(&pdev->dev, PTR_ERR(spi->clk), 547 "could not get clk\n"); 548 549 ret = clk_prepare_enable(spi->clk); 550 if (ret) 551 return dev_err_probe(&pdev->dev, ret, 552 "failed to enable clock\n"); 553 554 mchp_corespi_init(master, spi); 555 556 ret = devm_spi_register_master(&pdev->dev, master); 557 if (ret) { 558 mchp_corespi_disable(spi); 559 clk_disable_unprepare(spi->clk); 560 return dev_err_probe(&pdev->dev, ret, 561 "unable to register master for SPI controller\n"); 562 } 563 564 dev_info(&pdev->dev, "Registered SPI controller %d\n", master->bus_num); 565 566 return 0; 567 } 568 569 static void mchp_corespi_remove(struct platform_device *pdev) 570 { 571 struct spi_master *master = platform_get_drvdata(pdev); 572 struct mchp_corespi *spi = spi_master_get_devdata(master); 573 574 mchp_corespi_disable_ints(spi); 575 clk_disable_unprepare(spi->clk); 576 mchp_corespi_disable(spi); 577 } 578 579 #define MICROCHIP_SPI_PM_OPS (NULL) 580 581 /* 582 * Platform driver data structure 583 */ 584 585 #if defined(CONFIG_OF) 586 static const struct of_device_id mchp_corespi_dt_ids[] = { 587 { .compatible = "microchip,mpfs-spi" }, 588 { /* sentinel */ } 589 }; 590 MODULE_DEVICE_TABLE(of, mchp_corespi_dt_ids); 591 #endif 592 593 static struct platform_driver mchp_corespi_driver = { 594 .probe = mchp_corespi_probe, 595 .driver = { 596 .name = "microchip-corespi", 597 .pm = MICROCHIP_SPI_PM_OPS, 598 .of_match_table = of_match_ptr(mchp_corespi_dt_ids), 599 }, 600 .remove_new = mchp_corespi_remove, 601 }; 602 module_platform_driver(mchp_corespi_driver); 603 MODULE_DESCRIPTION("Microchip coreSPI SPI controller driver"); 604 MODULE_AUTHOR("Daire McNamara <daire.mcnamara@microchip.com>"); 605 MODULE_AUTHOR("Conor Dooley <conor.dooley@microchip.com>"); 606 MODULE_LICENSE("GPL"); 607