1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright (C) 2011-2015 Daniel Schwierzeck <daniel.schwierzeck@gmail.com> 4 * Copyright (C) 2016 Hauke Mehrtens <hauke@hauke-m.de> 5 */ 6 7 #include <linux/kernel.h> 8 #include <linux/module.h> 9 #include <linux/of_device.h> 10 #include <linux/clk.h> 11 #include <linux/io.h> 12 #include <linux/delay.h> 13 #include <linux/interrupt.h> 14 #include <linux/sched.h> 15 #include <linux/completion.h> 16 #include <linux/spinlock.h> 17 #include <linux/err.h> 18 #include <linux/pm_runtime.h> 19 #include <linux/spi/spi.h> 20 21 #ifdef CONFIG_LANTIQ 22 #include <lantiq_soc.h> 23 #endif 24 25 #define LTQ_SPI_RX_IRQ_NAME "spi_rx" 26 #define LTQ_SPI_TX_IRQ_NAME "spi_tx" 27 #define LTQ_SPI_ERR_IRQ_NAME "spi_err" 28 #define LTQ_SPI_FRM_IRQ_NAME "spi_frm" 29 30 #define LTQ_SPI_CLC 0x00 31 #define LTQ_SPI_PISEL 0x04 32 #define LTQ_SPI_ID 0x08 33 #define LTQ_SPI_CON 0x10 34 #define LTQ_SPI_STAT 0x14 35 #define LTQ_SPI_WHBSTATE 0x18 36 #define LTQ_SPI_TB 0x20 37 #define LTQ_SPI_RB 0x24 38 #define LTQ_SPI_RXFCON 0x30 39 #define LTQ_SPI_TXFCON 0x34 40 #define LTQ_SPI_FSTAT 0x38 41 #define LTQ_SPI_BRT 0x40 42 #define LTQ_SPI_BRSTAT 0x44 43 #define LTQ_SPI_SFCON 0x60 44 #define LTQ_SPI_SFSTAT 0x64 45 #define LTQ_SPI_GPOCON 0x70 46 #define LTQ_SPI_GPOSTAT 0x74 47 #define LTQ_SPI_FPGO 0x78 48 #define LTQ_SPI_RXREQ 0x80 49 #define LTQ_SPI_RXCNT 0x84 50 #define LTQ_SPI_DMACON 0xec 51 #define LTQ_SPI_IRNEN 0xf4 52 53 #define LTQ_SPI_CLC_SMC_S 16 /* Clock divider for sleep mode */ 54 #define LTQ_SPI_CLC_SMC_M (0xFF << LTQ_SPI_CLC_SMC_S) 55 #define LTQ_SPI_CLC_RMC_S 8 /* Clock divider for normal run mode */ 56 #define LTQ_SPI_CLC_RMC_M (0xFF << LTQ_SPI_CLC_RMC_S) 57 #define LTQ_SPI_CLC_DISS BIT(1) /* Disable status bit */ 58 #define LTQ_SPI_CLC_DISR BIT(0) /* Disable request bit */ 59 60 #define LTQ_SPI_ID_TXFS_S 24 /* Implemented TX FIFO size */ 61 #define LTQ_SPI_ID_RXFS_S 16 /* Implemented RX FIFO size */ 62 #define LTQ_SPI_ID_MOD_S 8 /* Module ID */ 63 #define LTQ_SPI_ID_MOD_M (0xff << LTQ_SPI_ID_MOD_S) 64 #define LTQ_SPI_ID_CFG_S 5 /* DMA interface support */ 65 #define LTQ_SPI_ID_CFG_M (1 << LTQ_SPI_ID_CFG_S) 66 #define LTQ_SPI_ID_REV_M 0x1F /* Hardware revision number */ 67 68 #define LTQ_SPI_CON_BM_S 16 /* Data width selection */ 69 #define LTQ_SPI_CON_BM_M (0x1F << LTQ_SPI_CON_BM_S) 70 #define LTQ_SPI_CON_EM BIT(24) /* Echo mode */ 71 #define LTQ_SPI_CON_IDLE BIT(23) /* Idle bit value */ 72 #define LTQ_SPI_CON_ENBV BIT(22) /* Enable byte valid control */ 73 #define LTQ_SPI_CON_RUEN BIT(12) /* Receive underflow error enable */ 74 #define LTQ_SPI_CON_TUEN BIT(11) /* Transmit underflow error enable */ 75 #define LTQ_SPI_CON_AEN BIT(10) /* Abort error enable */ 76 #define LTQ_SPI_CON_REN BIT(9) /* Receive overflow error enable */ 77 #define LTQ_SPI_CON_TEN BIT(8) /* Transmit overflow error enable */ 78 #define LTQ_SPI_CON_LB BIT(7) /* Loopback control */ 79 #define LTQ_SPI_CON_PO BIT(6) /* Clock polarity control */ 80 #define LTQ_SPI_CON_PH BIT(5) /* Clock phase control */ 81 #define LTQ_SPI_CON_HB BIT(4) /* Heading control */ 82 #define LTQ_SPI_CON_RXOFF BIT(1) /* Switch receiver off */ 83 #define LTQ_SPI_CON_TXOFF BIT(0) /* Switch transmitter off */ 84 85 #define LTQ_SPI_STAT_RXBV_S 28 86 #define LTQ_SPI_STAT_RXBV_M (0x7 << LTQ_SPI_STAT_RXBV_S) 87 #define LTQ_SPI_STAT_BSY BIT(13) /* Busy flag */ 88 #define LTQ_SPI_STAT_RUE BIT(12) /* Receive underflow error flag */ 89 #define LTQ_SPI_STAT_TUE BIT(11) /* Transmit underflow error flag */ 90 #define LTQ_SPI_STAT_AE BIT(10) /* Abort error flag */ 91 #define LTQ_SPI_STAT_RE BIT(9) /* Receive error flag */ 92 #define LTQ_SPI_STAT_TE BIT(8) /* Transmit error flag */ 93 #define LTQ_SPI_STAT_ME BIT(7) /* Mode error flag */ 94 #define LTQ_SPI_STAT_MS BIT(1) /* Master/slave select bit */ 95 #define LTQ_SPI_STAT_EN BIT(0) /* Enable bit */ 96 #define LTQ_SPI_STAT_ERRORS (LTQ_SPI_STAT_ME | LTQ_SPI_STAT_TE | \ 97 LTQ_SPI_STAT_RE | LTQ_SPI_STAT_AE | \ 98 LTQ_SPI_STAT_TUE | LTQ_SPI_STAT_RUE) 99 100 #define LTQ_SPI_WHBSTATE_SETTUE BIT(15) /* Set transmit underflow error flag */ 101 #define LTQ_SPI_WHBSTATE_SETAE BIT(14) /* Set abort error flag */ 102 #define LTQ_SPI_WHBSTATE_SETRE BIT(13) /* Set receive error flag */ 103 #define LTQ_SPI_WHBSTATE_SETTE BIT(12) /* Set transmit error flag */ 104 #define LTQ_SPI_WHBSTATE_CLRTUE BIT(11) /* Clear transmit underflow error flag */ 105 #define LTQ_SPI_WHBSTATE_CLRAE BIT(10) /* Clear abort error flag */ 106 #define LTQ_SPI_WHBSTATE_CLRRE BIT(9) /* Clear receive error flag */ 107 #define LTQ_SPI_WHBSTATE_CLRTE BIT(8) /* Clear transmit error flag */ 108 #define LTQ_SPI_WHBSTATE_SETME BIT(7) /* Set mode error flag */ 109 #define LTQ_SPI_WHBSTATE_CLRME BIT(6) /* Clear mode error flag */ 110 #define LTQ_SPI_WHBSTATE_SETRUE BIT(5) /* Set receive underflow error flag */ 111 #define LTQ_SPI_WHBSTATE_CLRRUE BIT(4) /* Clear receive underflow error flag */ 112 #define LTQ_SPI_WHBSTATE_SETMS BIT(3) /* Set master select bit */ 113 #define LTQ_SPI_WHBSTATE_CLRMS BIT(2) /* Clear master select bit */ 114 #define LTQ_SPI_WHBSTATE_SETEN BIT(1) /* Set enable bit (operational mode) */ 115 #define LTQ_SPI_WHBSTATE_CLREN BIT(0) /* Clear enable bit (config mode */ 116 #define LTQ_SPI_WHBSTATE_CLR_ERRORS (LTQ_SPI_WHBSTATE_CLRRUE | \ 117 LTQ_SPI_WHBSTATE_CLRME | \ 118 LTQ_SPI_WHBSTATE_CLRTE | \ 119 LTQ_SPI_WHBSTATE_CLRRE | \ 120 LTQ_SPI_WHBSTATE_CLRAE | \ 121 LTQ_SPI_WHBSTATE_CLRTUE) 122 123 #define LTQ_SPI_RXFCON_RXFITL_S 8 /* FIFO interrupt trigger level */ 124 #define LTQ_SPI_RXFCON_RXFLU BIT(1) /* FIFO flush */ 125 #define LTQ_SPI_RXFCON_RXFEN BIT(0) /* FIFO enable */ 126 127 #define LTQ_SPI_TXFCON_TXFITL_S 8 /* FIFO interrupt trigger level */ 128 #define LTQ_SPI_TXFCON_TXFLU BIT(1) /* FIFO flush */ 129 #define LTQ_SPI_TXFCON_TXFEN BIT(0) /* FIFO enable */ 130 131 #define LTQ_SPI_FSTAT_RXFFL_S 0 132 #define LTQ_SPI_FSTAT_TXFFL_S 8 133 134 #define LTQ_SPI_GPOCON_ISCSBN_S 8 135 #define LTQ_SPI_GPOCON_INVOUTN_S 0 136 137 #define LTQ_SPI_FGPO_SETOUTN_S 8 138 #define LTQ_SPI_FGPO_CLROUTN_S 0 139 140 #define LTQ_SPI_RXREQ_RXCNT_M 0xFFFF /* Receive count value */ 141 #define LTQ_SPI_RXCNT_TODO_M 0xFFFF /* Recevie to-do value */ 142 143 #define LTQ_SPI_IRNEN_TFI BIT(4) /* TX finished interrupt */ 144 #define LTQ_SPI_IRNEN_F BIT(3) /* Frame end interrupt request */ 145 #define LTQ_SPI_IRNEN_E BIT(2) /* Error end interrupt request */ 146 #define LTQ_SPI_IRNEN_T_XWAY BIT(1) /* Transmit end interrupt request */ 147 #define LTQ_SPI_IRNEN_R_XWAY BIT(0) /* Receive end interrupt request */ 148 #define LTQ_SPI_IRNEN_R_XRX BIT(1) /* Transmit end interrupt request */ 149 #define LTQ_SPI_IRNEN_T_XRX BIT(0) /* Receive end interrupt request */ 150 #define LTQ_SPI_IRNEN_ALL 0x1F 151 152 struct lantiq_ssc_spi; 153 154 struct lantiq_ssc_hwcfg { 155 int (*cfg_irq)(struct platform_device *pdev, struct lantiq_ssc_spi *spi); 156 unsigned int irnen_r; 157 unsigned int irnen_t; 158 unsigned int irncr; 159 unsigned int irnicr; 160 bool irq_ack; 161 u32 fifo_size_mask; 162 }; 163 164 struct lantiq_ssc_spi { 165 struct spi_master *master; 166 struct device *dev; 167 void __iomem *regbase; 168 struct clk *spi_clk; 169 struct clk *fpi_clk; 170 const struct lantiq_ssc_hwcfg *hwcfg; 171 172 spinlock_t lock; 173 struct workqueue_struct *wq; 174 struct work_struct work; 175 176 const u8 *tx; 177 u8 *rx; 178 unsigned int tx_todo; 179 unsigned int rx_todo; 180 unsigned int bits_per_word; 181 unsigned int speed_hz; 182 unsigned int tx_fifo_size; 183 unsigned int rx_fifo_size; 184 unsigned int base_cs; 185 unsigned int fdx_tx_level; 186 }; 187 188 static u32 lantiq_ssc_readl(const struct lantiq_ssc_spi *spi, u32 reg) 189 { 190 return __raw_readl(spi->regbase + reg); 191 } 192 193 static void lantiq_ssc_writel(const struct lantiq_ssc_spi *spi, u32 val, 194 u32 reg) 195 { 196 __raw_writel(val, spi->regbase + reg); 197 } 198 199 static void lantiq_ssc_maskl(const struct lantiq_ssc_spi *spi, u32 clr, 200 u32 set, u32 reg) 201 { 202 u32 val = __raw_readl(spi->regbase + reg); 203 204 val &= ~clr; 205 val |= set; 206 __raw_writel(val, spi->regbase + reg); 207 } 208 209 static unsigned int tx_fifo_level(const struct lantiq_ssc_spi *spi) 210 { 211 const struct lantiq_ssc_hwcfg *hwcfg = spi->hwcfg; 212 u32 fstat = lantiq_ssc_readl(spi, LTQ_SPI_FSTAT); 213 214 return (fstat >> LTQ_SPI_FSTAT_TXFFL_S) & hwcfg->fifo_size_mask; 215 } 216 217 static unsigned int rx_fifo_level(const struct lantiq_ssc_spi *spi) 218 { 219 const struct lantiq_ssc_hwcfg *hwcfg = spi->hwcfg; 220 u32 fstat = lantiq_ssc_readl(spi, LTQ_SPI_FSTAT); 221 222 return (fstat >> LTQ_SPI_FSTAT_RXFFL_S) & hwcfg->fifo_size_mask; 223 } 224 225 static unsigned int tx_fifo_free(const struct lantiq_ssc_spi *spi) 226 { 227 return spi->tx_fifo_size - tx_fifo_level(spi); 228 } 229 230 static void rx_fifo_reset(const struct lantiq_ssc_spi *spi) 231 { 232 u32 val = spi->rx_fifo_size << LTQ_SPI_RXFCON_RXFITL_S; 233 234 val |= LTQ_SPI_RXFCON_RXFEN | LTQ_SPI_RXFCON_RXFLU; 235 lantiq_ssc_writel(spi, val, LTQ_SPI_RXFCON); 236 } 237 238 static void tx_fifo_reset(const struct lantiq_ssc_spi *spi) 239 { 240 u32 val = 1 << LTQ_SPI_TXFCON_TXFITL_S; 241 242 val |= LTQ_SPI_TXFCON_TXFEN | LTQ_SPI_TXFCON_TXFLU; 243 lantiq_ssc_writel(spi, val, LTQ_SPI_TXFCON); 244 } 245 246 static void rx_fifo_flush(const struct lantiq_ssc_spi *spi) 247 { 248 lantiq_ssc_maskl(spi, 0, LTQ_SPI_RXFCON_RXFLU, LTQ_SPI_RXFCON); 249 } 250 251 static void tx_fifo_flush(const struct lantiq_ssc_spi *spi) 252 { 253 lantiq_ssc_maskl(spi, 0, LTQ_SPI_TXFCON_TXFLU, LTQ_SPI_TXFCON); 254 } 255 256 static void hw_enter_config_mode(const struct lantiq_ssc_spi *spi) 257 { 258 lantiq_ssc_writel(spi, LTQ_SPI_WHBSTATE_CLREN, LTQ_SPI_WHBSTATE); 259 } 260 261 static void hw_enter_active_mode(const struct lantiq_ssc_spi *spi) 262 { 263 lantiq_ssc_writel(spi, LTQ_SPI_WHBSTATE_SETEN, LTQ_SPI_WHBSTATE); 264 } 265 266 static void hw_setup_speed_hz(const struct lantiq_ssc_spi *spi, 267 unsigned int max_speed_hz) 268 { 269 u32 spi_clk, brt; 270 271 /* 272 * SPI module clock is derived from FPI bus clock dependent on 273 * divider value in CLC.RMS which is always set to 1. 274 * 275 * f_SPI 276 * baudrate = -------------- 277 * 2 * (BR + 1) 278 */ 279 spi_clk = clk_get_rate(spi->fpi_clk) / 2; 280 281 if (max_speed_hz > spi_clk) 282 brt = 0; 283 else 284 brt = spi_clk / max_speed_hz - 1; 285 286 if (brt > 0xFFFF) 287 brt = 0xFFFF; 288 289 dev_dbg(spi->dev, "spi_clk %u, max_speed_hz %u, brt %u\n", 290 spi_clk, max_speed_hz, brt); 291 292 lantiq_ssc_writel(spi, brt, LTQ_SPI_BRT); 293 } 294 295 static void hw_setup_bits_per_word(const struct lantiq_ssc_spi *spi, 296 unsigned int bits_per_word) 297 { 298 u32 bm; 299 300 /* CON.BM value = bits_per_word - 1 */ 301 bm = (bits_per_word - 1) << LTQ_SPI_CON_BM_S; 302 303 lantiq_ssc_maskl(spi, LTQ_SPI_CON_BM_M, bm, LTQ_SPI_CON); 304 } 305 306 static void hw_setup_clock_mode(const struct lantiq_ssc_spi *spi, 307 unsigned int mode) 308 { 309 u32 con_set = 0, con_clr = 0; 310 311 /* 312 * SPI mode mapping in CON register: 313 * Mode CPOL CPHA CON.PO CON.PH 314 * 0 0 0 0 1 315 * 1 0 1 0 0 316 * 2 1 0 1 1 317 * 3 1 1 1 0 318 */ 319 if (mode & SPI_CPHA) 320 con_clr |= LTQ_SPI_CON_PH; 321 else 322 con_set |= LTQ_SPI_CON_PH; 323 324 if (mode & SPI_CPOL) 325 con_set |= LTQ_SPI_CON_PO | LTQ_SPI_CON_IDLE; 326 else 327 con_clr |= LTQ_SPI_CON_PO | LTQ_SPI_CON_IDLE; 328 329 /* Set heading control */ 330 if (mode & SPI_LSB_FIRST) 331 con_clr |= LTQ_SPI_CON_HB; 332 else 333 con_set |= LTQ_SPI_CON_HB; 334 335 /* Set loopback mode */ 336 if (mode & SPI_LOOP) 337 con_set |= LTQ_SPI_CON_LB; 338 else 339 con_clr |= LTQ_SPI_CON_LB; 340 341 lantiq_ssc_maskl(spi, con_clr, con_set, LTQ_SPI_CON); 342 } 343 344 static void lantiq_ssc_hw_init(const struct lantiq_ssc_spi *spi) 345 { 346 const struct lantiq_ssc_hwcfg *hwcfg = spi->hwcfg; 347 348 /* 349 * Set clock divider for run mode to 1 to 350 * run at same frequency as FPI bus 351 */ 352 lantiq_ssc_writel(spi, 1 << LTQ_SPI_CLC_RMC_S, LTQ_SPI_CLC); 353 354 /* Put controller into config mode */ 355 hw_enter_config_mode(spi); 356 357 /* Clear error flags */ 358 lantiq_ssc_maskl(spi, 0, LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE); 359 360 /* Enable error checking, disable TX/RX */ 361 lantiq_ssc_writel(spi, LTQ_SPI_CON_RUEN | LTQ_SPI_CON_AEN | 362 LTQ_SPI_CON_TEN | LTQ_SPI_CON_REN | LTQ_SPI_CON_TXOFF | 363 LTQ_SPI_CON_RXOFF, LTQ_SPI_CON); 364 365 /* Setup default SPI mode */ 366 hw_setup_bits_per_word(spi, spi->bits_per_word); 367 hw_setup_clock_mode(spi, SPI_MODE_0); 368 369 /* Enable master mode and clear error flags */ 370 lantiq_ssc_writel(spi, LTQ_SPI_WHBSTATE_SETMS | 371 LTQ_SPI_WHBSTATE_CLR_ERRORS, 372 LTQ_SPI_WHBSTATE); 373 374 /* Reset GPIO/CS registers */ 375 lantiq_ssc_writel(spi, 0, LTQ_SPI_GPOCON); 376 lantiq_ssc_writel(spi, 0xFF00, LTQ_SPI_FPGO); 377 378 /* Enable and flush FIFOs */ 379 rx_fifo_reset(spi); 380 tx_fifo_reset(spi); 381 382 /* Enable interrupts */ 383 lantiq_ssc_writel(spi, hwcfg->irnen_t | hwcfg->irnen_r | 384 LTQ_SPI_IRNEN_E, LTQ_SPI_IRNEN); 385 } 386 387 static int lantiq_ssc_setup(struct spi_device *spidev) 388 { 389 struct spi_master *master = spidev->master; 390 struct lantiq_ssc_spi *spi = spi_master_get_devdata(master); 391 unsigned int cs = spidev->chip_select; 392 u32 gpocon; 393 394 /* GPIOs are used for CS */ 395 if (spidev->cs_gpiod) 396 return 0; 397 398 dev_dbg(spi->dev, "using internal chipselect %u\n", cs); 399 400 if (cs < spi->base_cs) { 401 dev_err(spi->dev, 402 "chipselect %i too small (min %i)\n", cs, spi->base_cs); 403 return -EINVAL; 404 } 405 406 /* set GPO pin to CS mode */ 407 gpocon = 1 << ((cs - spi->base_cs) + LTQ_SPI_GPOCON_ISCSBN_S); 408 409 /* invert GPO pin */ 410 if (spidev->mode & SPI_CS_HIGH) 411 gpocon |= 1 << (cs - spi->base_cs); 412 413 lantiq_ssc_maskl(spi, 0, gpocon, LTQ_SPI_GPOCON); 414 415 return 0; 416 } 417 418 static int lantiq_ssc_prepare_message(struct spi_master *master, 419 struct spi_message *message) 420 { 421 struct lantiq_ssc_spi *spi = spi_master_get_devdata(master); 422 423 hw_enter_config_mode(spi); 424 hw_setup_clock_mode(spi, message->spi->mode); 425 hw_enter_active_mode(spi); 426 427 return 0; 428 } 429 430 static void hw_setup_transfer(struct lantiq_ssc_spi *spi, 431 struct spi_device *spidev, struct spi_transfer *t) 432 { 433 unsigned int speed_hz = t->speed_hz; 434 unsigned int bits_per_word = t->bits_per_word; 435 u32 con; 436 437 if (bits_per_word != spi->bits_per_word || 438 speed_hz != spi->speed_hz) { 439 hw_enter_config_mode(spi); 440 hw_setup_speed_hz(spi, speed_hz); 441 hw_setup_bits_per_word(spi, bits_per_word); 442 hw_enter_active_mode(spi); 443 444 spi->speed_hz = speed_hz; 445 spi->bits_per_word = bits_per_word; 446 } 447 448 /* Configure transmitter and receiver */ 449 con = lantiq_ssc_readl(spi, LTQ_SPI_CON); 450 if (t->tx_buf) 451 con &= ~LTQ_SPI_CON_TXOFF; 452 else 453 con |= LTQ_SPI_CON_TXOFF; 454 455 if (t->rx_buf) 456 con &= ~LTQ_SPI_CON_RXOFF; 457 else 458 con |= LTQ_SPI_CON_RXOFF; 459 460 lantiq_ssc_writel(spi, con, LTQ_SPI_CON); 461 } 462 463 static int lantiq_ssc_unprepare_message(struct spi_master *master, 464 struct spi_message *message) 465 { 466 struct lantiq_ssc_spi *spi = spi_master_get_devdata(master); 467 468 flush_workqueue(spi->wq); 469 470 /* Disable transmitter and receiver while idle */ 471 lantiq_ssc_maskl(spi, 0, LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF, 472 LTQ_SPI_CON); 473 474 return 0; 475 } 476 477 static void tx_fifo_write(struct lantiq_ssc_spi *spi) 478 { 479 const u8 *tx8; 480 const u16 *tx16; 481 const u32 *tx32; 482 u32 data; 483 unsigned int tx_free = tx_fifo_free(spi); 484 485 spi->fdx_tx_level = 0; 486 while (spi->tx_todo && tx_free) { 487 switch (spi->bits_per_word) { 488 case 2 ... 8: 489 tx8 = spi->tx; 490 data = *tx8; 491 spi->tx_todo--; 492 spi->tx++; 493 break; 494 case 16: 495 tx16 = (u16 *) spi->tx; 496 data = *tx16; 497 spi->tx_todo -= 2; 498 spi->tx += 2; 499 break; 500 case 32: 501 tx32 = (u32 *) spi->tx; 502 data = *tx32; 503 spi->tx_todo -= 4; 504 spi->tx += 4; 505 break; 506 default: 507 WARN_ON(1); 508 data = 0; 509 break; 510 } 511 512 lantiq_ssc_writel(spi, data, LTQ_SPI_TB); 513 tx_free--; 514 spi->fdx_tx_level++; 515 } 516 } 517 518 static void rx_fifo_read_full_duplex(struct lantiq_ssc_spi *spi) 519 { 520 u8 *rx8; 521 u16 *rx16; 522 u32 *rx32; 523 u32 data; 524 unsigned int rx_fill = rx_fifo_level(spi); 525 526 /* 527 * Wait until all expected data to be shifted in. 528 * Otherwise, rx overrun may occur. 529 */ 530 while (rx_fill != spi->fdx_tx_level) 531 rx_fill = rx_fifo_level(spi); 532 533 while (rx_fill) { 534 data = lantiq_ssc_readl(spi, LTQ_SPI_RB); 535 536 switch (spi->bits_per_word) { 537 case 2 ... 8: 538 rx8 = spi->rx; 539 *rx8 = data; 540 spi->rx_todo--; 541 spi->rx++; 542 break; 543 case 16: 544 rx16 = (u16 *) spi->rx; 545 *rx16 = data; 546 spi->rx_todo -= 2; 547 spi->rx += 2; 548 break; 549 case 32: 550 rx32 = (u32 *) spi->rx; 551 *rx32 = data; 552 spi->rx_todo -= 4; 553 spi->rx += 4; 554 break; 555 default: 556 WARN_ON(1); 557 break; 558 } 559 560 rx_fill--; 561 } 562 } 563 564 static void rx_fifo_read_half_duplex(struct lantiq_ssc_spi *spi) 565 { 566 u32 data, *rx32; 567 u8 *rx8; 568 unsigned int rxbv, shift; 569 unsigned int rx_fill = rx_fifo_level(spi); 570 571 /* 572 * In RX-only mode the bits per word value is ignored by HW. A value 573 * of 32 is used instead. Thus all 4 bytes per FIFO must be read. 574 * If remaining RX bytes are less than 4, the FIFO must be read 575 * differently. The amount of received and valid bytes is indicated 576 * by STAT.RXBV register value. 577 */ 578 while (rx_fill) { 579 if (spi->rx_todo < 4) { 580 rxbv = (lantiq_ssc_readl(spi, LTQ_SPI_STAT) & 581 LTQ_SPI_STAT_RXBV_M) >> LTQ_SPI_STAT_RXBV_S; 582 data = lantiq_ssc_readl(spi, LTQ_SPI_RB); 583 584 shift = (rxbv - 1) * 8; 585 rx8 = spi->rx; 586 587 while (rxbv) { 588 *rx8++ = (data >> shift) & 0xFF; 589 rxbv--; 590 shift -= 8; 591 spi->rx_todo--; 592 spi->rx++; 593 } 594 } else { 595 data = lantiq_ssc_readl(spi, LTQ_SPI_RB); 596 rx32 = (u32 *) spi->rx; 597 598 *rx32++ = data; 599 spi->rx_todo -= 4; 600 spi->rx += 4; 601 } 602 rx_fill--; 603 } 604 } 605 606 static void rx_request(struct lantiq_ssc_spi *spi) 607 { 608 unsigned int rxreq, rxreq_max; 609 610 /* 611 * To avoid receive overflows at high clocks it is better to request 612 * only the amount of bytes that fits into all FIFOs. This value 613 * depends on the FIFO size implemented in hardware. 614 */ 615 rxreq = spi->rx_todo; 616 rxreq_max = spi->rx_fifo_size * 4; 617 if (rxreq > rxreq_max) 618 rxreq = rxreq_max; 619 620 lantiq_ssc_writel(spi, rxreq, LTQ_SPI_RXREQ); 621 } 622 623 static irqreturn_t lantiq_ssc_xmit_interrupt(int irq, void *data) 624 { 625 struct lantiq_ssc_spi *spi = data; 626 const struct lantiq_ssc_hwcfg *hwcfg = spi->hwcfg; 627 u32 val = lantiq_ssc_readl(spi, hwcfg->irncr); 628 629 spin_lock(&spi->lock); 630 if (hwcfg->irq_ack) 631 lantiq_ssc_writel(spi, val, hwcfg->irncr); 632 633 if (spi->tx) { 634 if (spi->rx && spi->rx_todo) 635 rx_fifo_read_full_duplex(spi); 636 637 if (spi->tx_todo) 638 tx_fifo_write(spi); 639 else if (!tx_fifo_level(spi)) 640 goto completed; 641 } else if (spi->rx) { 642 if (spi->rx_todo) { 643 rx_fifo_read_half_duplex(spi); 644 645 if (spi->rx_todo) 646 rx_request(spi); 647 else 648 goto completed; 649 } else { 650 goto completed; 651 } 652 } 653 654 spin_unlock(&spi->lock); 655 return IRQ_HANDLED; 656 657 completed: 658 queue_work(spi->wq, &spi->work); 659 spin_unlock(&spi->lock); 660 661 return IRQ_HANDLED; 662 } 663 664 static irqreturn_t lantiq_ssc_err_interrupt(int irq, void *data) 665 { 666 struct lantiq_ssc_spi *spi = data; 667 const struct lantiq_ssc_hwcfg *hwcfg = spi->hwcfg; 668 u32 stat = lantiq_ssc_readl(spi, LTQ_SPI_STAT); 669 u32 val = lantiq_ssc_readl(spi, hwcfg->irncr); 670 671 if (!(stat & LTQ_SPI_STAT_ERRORS)) 672 return IRQ_NONE; 673 674 spin_lock(&spi->lock); 675 if (hwcfg->irq_ack) 676 lantiq_ssc_writel(spi, val, hwcfg->irncr); 677 678 if (stat & LTQ_SPI_STAT_RUE) 679 dev_err(spi->dev, "receive underflow error\n"); 680 if (stat & LTQ_SPI_STAT_TUE) 681 dev_err(spi->dev, "transmit underflow error\n"); 682 if (stat & LTQ_SPI_STAT_AE) 683 dev_err(spi->dev, "abort error\n"); 684 if (stat & LTQ_SPI_STAT_RE) 685 dev_err(spi->dev, "receive overflow error\n"); 686 if (stat & LTQ_SPI_STAT_TE) 687 dev_err(spi->dev, "transmit overflow error\n"); 688 if (stat & LTQ_SPI_STAT_ME) 689 dev_err(spi->dev, "mode error\n"); 690 691 /* Clear error flags */ 692 lantiq_ssc_maskl(spi, 0, LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE); 693 694 /* set bad status so it can be retried */ 695 if (spi->master->cur_msg) 696 spi->master->cur_msg->status = -EIO; 697 queue_work(spi->wq, &spi->work); 698 spin_unlock(&spi->lock); 699 700 return IRQ_HANDLED; 701 } 702 703 static irqreturn_t intel_lgm_ssc_isr(int irq, void *data) 704 { 705 struct lantiq_ssc_spi *spi = data; 706 const struct lantiq_ssc_hwcfg *hwcfg = spi->hwcfg; 707 u32 val = lantiq_ssc_readl(spi, hwcfg->irncr); 708 709 if (!(val & LTQ_SPI_IRNEN_ALL)) 710 return IRQ_NONE; 711 712 if (val & LTQ_SPI_IRNEN_E) 713 return lantiq_ssc_err_interrupt(irq, data); 714 715 if ((val & hwcfg->irnen_t) || (val & hwcfg->irnen_r)) 716 return lantiq_ssc_xmit_interrupt(irq, data); 717 718 return IRQ_HANDLED; 719 } 720 721 static int transfer_start(struct lantiq_ssc_spi *spi, struct spi_device *spidev, 722 struct spi_transfer *t) 723 { 724 unsigned long flags; 725 726 spin_lock_irqsave(&spi->lock, flags); 727 728 spi->tx = t->tx_buf; 729 spi->rx = t->rx_buf; 730 731 if (t->tx_buf) { 732 spi->tx_todo = t->len; 733 734 /* initially fill TX FIFO */ 735 tx_fifo_write(spi); 736 } 737 738 if (spi->rx) { 739 spi->rx_todo = t->len; 740 741 /* start shift clock in RX-only mode */ 742 if (!spi->tx) 743 rx_request(spi); 744 } 745 746 spin_unlock_irqrestore(&spi->lock, flags); 747 748 return t->len; 749 } 750 751 /* 752 * The driver only gets an interrupt when the FIFO is empty, but there 753 * is an additional shift register from which the data is written to 754 * the wire. We get the last interrupt when the controller starts to 755 * write the last word to the wire, not when it is finished. Do busy 756 * waiting till it finishes. 757 */ 758 static void lantiq_ssc_bussy_work(struct work_struct *work) 759 { 760 struct lantiq_ssc_spi *spi; 761 unsigned long long timeout = 8LL * 1000LL; 762 unsigned long end; 763 764 spi = container_of(work, typeof(*spi), work); 765 766 do_div(timeout, spi->speed_hz); 767 timeout += timeout + 100; /* some tolerance */ 768 769 end = jiffies + msecs_to_jiffies(timeout); 770 do { 771 u32 stat = lantiq_ssc_readl(spi, LTQ_SPI_STAT); 772 773 if (!(stat & LTQ_SPI_STAT_BSY)) { 774 spi_finalize_current_transfer(spi->master); 775 return; 776 } 777 778 cond_resched(); 779 } while (!time_after_eq(jiffies, end)); 780 781 if (spi->master->cur_msg) 782 spi->master->cur_msg->status = -EIO; 783 spi_finalize_current_transfer(spi->master); 784 } 785 786 static void lantiq_ssc_handle_err(struct spi_master *master, 787 struct spi_message *message) 788 { 789 struct lantiq_ssc_spi *spi = spi_master_get_devdata(master); 790 791 /* flush FIFOs on timeout */ 792 rx_fifo_flush(spi); 793 tx_fifo_flush(spi); 794 } 795 796 static void lantiq_ssc_set_cs(struct spi_device *spidev, bool enable) 797 { 798 struct lantiq_ssc_spi *spi = spi_master_get_devdata(spidev->master); 799 unsigned int cs = spidev->chip_select; 800 u32 fgpo; 801 802 if (!!(spidev->mode & SPI_CS_HIGH) == enable) 803 fgpo = (1 << (cs - spi->base_cs)); 804 else 805 fgpo = (1 << (cs - spi->base_cs + LTQ_SPI_FGPO_SETOUTN_S)); 806 807 lantiq_ssc_writel(spi, fgpo, LTQ_SPI_FPGO); 808 } 809 810 static int lantiq_ssc_transfer_one(struct spi_master *master, 811 struct spi_device *spidev, 812 struct spi_transfer *t) 813 { 814 struct lantiq_ssc_spi *spi = spi_master_get_devdata(master); 815 816 hw_setup_transfer(spi, spidev, t); 817 818 return transfer_start(spi, spidev, t); 819 } 820 821 static int intel_lgm_cfg_irq(struct platform_device *pdev, struct lantiq_ssc_spi *spi) 822 { 823 int irq; 824 825 irq = platform_get_irq(pdev, 0); 826 if (irq < 0) 827 return irq; 828 829 return devm_request_irq(&pdev->dev, irq, intel_lgm_ssc_isr, 0, "spi", spi); 830 } 831 832 static int lantiq_cfg_irq(struct platform_device *pdev, struct lantiq_ssc_spi *spi) 833 { 834 int irq, err; 835 836 irq = platform_get_irq_byname(pdev, LTQ_SPI_RX_IRQ_NAME); 837 if (irq < 0) 838 return irq; 839 840 err = devm_request_irq(&pdev->dev, irq, lantiq_ssc_xmit_interrupt, 841 0, LTQ_SPI_RX_IRQ_NAME, spi); 842 if (err) 843 return err; 844 845 irq = platform_get_irq_byname(pdev, LTQ_SPI_TX_IRQ_NAME); 846 if (irq < 0) 847 return irq; 848 849 err = devm_request_irq(&pdev->dev, irq, lantiq_ssc_xmit_interrupt, 850 0, LTQ_SPI_TX_IRQ_NAME, spi); 851 852 if (err) 853 return err; 854 855 irq = platform_get_irq_byname(pdev, LTQ_SPI_ERR_IRQ_NAME); 856 if (irq < 0) 857 return irq; 858 859 err = devm_request_irq(&pdev->dev, irq, lantiq_ssc_err_interrupt, 860 0, LTQ_SPI_ERR_IRQ_NAME, spi); 861 return err; 862 } 863 864 static const struct lantiq_ssc_hwcfg lantiq_ssc_xway = { 865 .cfg_irq = lantiq_cfg_irq, 866 .irnen_r = LTQ_SPI_IRNEN_R_XWAY, 867 .irnen_t = LTQ_SPI_IRNEN_T_XWAY, 868 .irnicr = 0xF8, 869 .irncr = 0xFC, 870 .fifo_size_mask = GENMASK(5, 0), 871 .irq_ack = false, 872 }; 873 874 static const struct lantiq_ssc_hwcfg lantiq_ssc_xrx = { 875 .cfg_irq = lantiq_cfg_irq, 876 .irnen_r = LTQ_SPI_IRNEN_R_XRX, 877 .irnen_t = LTQ_SPI_IRNEN_T_XRX, 878 .irnicr = 0xF8, 879 .irncr = 0xFC, 880 .fifo_size_mask = GENMASK(5, 0), 881 .irq_ack = false, 882 }; 883 884 static const struct lantiq_ssc_hwcfg intel_ssc_lgm = { 885 .cfg_irq = intel_lgm_cfg_irq, 886 .irnen_r = LTQ_SPI_IRNEN_R_XRX, 887 .irnen_t = LTQ_SPI_IRNEN_T_XRX, 888 .irnicr = 0xFC, 889 .irncr = 0xF8, 890 .fifo_size_mask = GENMASK(7, 0), 891 .irq_ack = true, 892 }; 893 894 static const struct of_device_id lantiq_ssc_match[] = { 895 { .compatible = "lantiq,ase-spi", .data = &lantiq_ssc_xway, }, 896 { .compatible = "lantiq,falcon-spi", .data = &lantiq_ssc_xrx, }, 897 { .compatible = "lantiq,xrx100-spi", .data = &lantiq_ssc_xrx, }, 898 { .compatible = "intel,lgm-spi", .data = &intel_ssc_lgm, }, 899 {}, 900 }; 901 MODULE_DEVICE_TABLE(of, lantiq_ssc_match); 902 903 static int lantiq_ssc_probe(struct platform_device *pdev) 904 { 905 struct device *dev = &pdev->dev; 906 struct spi_master *master; 907 struct lantiq_ssc_spi *spi; 908 const struct lantiq_ssc_hwcfg *hwcfg; 909 const struct of_device_id *match; 910 u32 id, supports_dma, revision; 911 unsigned int num_cs; 912 int err; 913 914 match = of_match_device(lantiq_ssc_match, dev); 915 if (!match) { 916 dev_err(dev, "no device match\n"); 917 return -EINVAL; 918 } 919 hwcfg = match->data; 920 921 master = spi_alloc_master(dev, sizeof(struct lantiq_ssc_spi)); 922 if (!master) 923 return -ENOMEM; 924 925 spi = spi_master_get_devdata(master); 926 spi->master = master; 927 spi->dev = dev; 928 spi->hwcfg = hwcfg; 929 platform_set_drvdata(pdev, spi); 930 spi->regbase = devm_platform_ioremap_resource(pdev, 0); 931 if (IS_ERR(spi->regbase)) { 932 err = PTR_ERR(spi->regbase); 933 goto err_master_put; 934 } 935 936 err = hwcfg->cfg_irq(pdev, spi); 937 if (err) 938 goto err_master_put; 939 940 spi->spi_clk = devm_clk_get(dev, "gate"); 941 if (IS_ERR(spi->spi_clk)) { 942 err = PTR_ERR(spi->spi_clk); 943 goto err_master_put; 944 } 945 err = clk_prepare_enable(spi->spi_clk); 946 if (err) 947 goto err_master_put; 948 949 /* 950 * Use the old clk_get_fpi() function on Lantiq platform, till it 951 * supports common clk. 952 */ 953 #if defined(CONFIG_LANTIQ) && !defined(CONFIG_COMMON_CLK) 954 spi->fpi_clk = clk_get_fpi(); 955 #else 956 spi->fpi_clk = clk_get(dev, "freq"); 957 #endif 958 if (IS_ERR(spi->fpi_clk)) { 959 err = PTR_ERR(spi->fpi_clk); 960 goto err_clk_disable; 961 } 962 963 num_cs = 8; 964 of_property_read_u32(pdev->dev.of_node, "num-cs", &num_cs); 965 966 spi->base_cs = 1; 967 of_property_read_u32(pdev->dev.of_node, "base-cs", &spi->base_cs); 968 969 spin_lock_init(&spi->lock); 970 spi->bits_per_word = 8; 971 spi->speed_hz = 0; 972 973 master->dev.of_node = pdev->dev.of_node; 974 master->num_chipselect = num_cs; 975 master->use_gpio_descriptors = true; 976 master->setup = lantiq_ssc_setup; 977 master->set_cs = lantiq_ssc_set_cs; 978 master->handle_err = lantiq_ssc_handle_err; 979 master->prepare_message = lantiq_ssc_prepare_message; 980 master->unprepare_message = lantiq_ssc_unprepare_message; 981 master->transfer_one = lantiq_ssc_transfer_one; 982 master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | SPI_CS_HIGH | 983 SPI_LOOP; 984 master->bits_per_word_mask = SPI_BPW_RANGE_MASK(2, 8) | 985 SPI_BPW_MASK(16) | SPI_BPW_MASK(32); 986 987 spi->wq = alloc_ordered_workqueue(dev_name(dev), WQ_MEM_RECLAIM); 988 if (!spi->wq) { 989 err = -ENOMEM; 990 goto err_clk_put; 991 } 992 INIT_WORK(&spi->work, lantiq_ssc_bussy_work); 993 994 id = lantiq_ssc_readl(spi, LTQ_SPI_ID); 995 spi->tx_fifo_size = (id >> LTQ_SPI_ID_TXFS_S) & hwcfg->fifo_size_mask; 996 spi->rx_fifo_size = (id >> LTQ_SPI_ID_RXFS_S) & hwcfg->fifo_size_mask; 997 supports_dma = (id & LTQ_SPI_ID_CFG_M) >> LTQ_SPI_ID_CFG_S; 998 revision = id & LTQ_SPI_ID_REV_M; 999 1000 lantiq_ssc_hw_init(spi); 1001 1002 dev_info(dev, 1003 "Lantiq SSC SPI controller (Rev %i, TXFS %u, RXFS %u, DMA %u)\n", 1004 revision, spi->tx_fifo_size, spi->rx_fifo_size, supports_dma); 1005 1006 err = devm_spi_register_master(dev, master); 1007 if (err) { 1008 dev_err(dev, "failed to register spi_master\n"); 1009 goto err_wq_destroy; 1010 } 1011 1012 return 0; 1013 1014 err_wq_destroy: 1015 destroy_workqueue(spi->wq); 1016 err_clk_put: 1017 clk_put(spi->fpi_clk); 1018 err_clk_disable: 1019 clk_disable_unprepare(spi->spi_clk); 1020 err_master_put: 1021 spi_master_put(master); 1022 1023 return err; 1024 } 1025 1026 static int lantiq_ssc_remove(struct platform_device *pdev) 1027 { 1028 struct lantiq_ssc_spi *spi = platform_get_drvdata(pdev); 1029 1030 lantiq_ssc_writel(spi, 0, LTQ_SPI_IRNEN); 1031 lantiq_ssc_writel(spi, 0, LTQ_SPI_CLC); 1032 rx_fifo_flush(spi); 1033 tx_fifo_flush(spi); 1034 hw_enter_config_mode(spi); 1035 1036 destroy_workqueue(spi->wq); 1037 clk_disable_unprepare(spi->spi_clk); 1038 clk_put(spi->fpi_clk); 1039 1040 return 0; 1041 } 1042 1043 static struct platform_driver lantiq_ssc_driver = { 1044 .probe = lantiq_ssc_probe, 1045 .remove = lantiq_ssc_remove, 1046 .driver = { 1047 .name = "spi-lantiq-ssc", 1048 .of_match_table = lantiq_ssc_match, 1049 }, 1050 }; 1051 module_platform_driver(lantiq_ssc_driver); 1052 1053 MODULE_DESCRIPTION("Lantiq SSC SPI controller driver"); 1054 MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierzeck@gmail.com>"); 1055 MODULE_AUTHOR("Hauke Mehrtens <hauke@hauke-m.de>"); 1056 MODULE_LICENSE("GPL"); 1057 MODULE_ALIAS("platform:spi-lantiq-ssc"); 1058