xref: /openbmc/linux/drivers/spi/spi-imx.c (revision adb57164)
1 // SPDX-License-Identifier: GPL-2.0+
2 // Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
3 // Copyright (C) 2008 Juergen Beisert
4 
5 #include <linux/clk.h>
6 #include <linux/completion.h>
7 #include <linux/delay.h>
8 #include <linux/dmaengine.h>
9 #include <linux/dma-mapping.h>
10 #include <linux/err.h>
11 #include <linux/gpio.h>
12 #include <linux/interrupt.h>
13 #include <linux/io.h>
14 #include <linux/irq.h>
15 #include <linux/kernel.h>
16 #include <linux/module.h>
17 #include <linux/platform_device.h>
18 #include <linux/slab.h>
19 #include <linux/spi/spi.h>
20 #include <linux/spi/spi_bitbang.h>
21 #include <linux/types.h>
22 #include <linux/of.h>
23 #include <linux/of_device.h>
24 #include <linux/of_gpio.h>
25 
26 #include <linux/platform_data/dma-imx.h>
27 #include <linux/platform_data/spi-imx.h>
28 
29 #define DRIVER_NAME "spi_imx"
30 
31 static bool use_dma = true;
32 module_param(use_dma, bool, 0644);
33 MODULE_PARM_DESC(use_dma, "Enable usage of DMA when available (default)");
34 
35 #define MXC_CSPIRXDATA		0x00
36 #define MXC_CSPITXDATA		0x04
37 #define MXC_CSPICTRL		0x08
38 #define MXC_CSPIINT		0x0c
39 #define MXC_RESET		0x1c
40 
41 /* generic defines to abstract from the different register layouts */
42 #define MXC_INT_RR	(1 << 0) /* Receive data ready interrupt */
43 #define MXC_INT_TE	(1 << 1) /* Transmit FIFO empty interrupt */
44 #define MXC_INT_RDR	BIT(4) /* Receive date threshold interrupt */
45 
46 /* The maximum bytes that a sdma BD can transfer. */
47 #define MAX_SDMA_BD_BYTES (1 << 15)
48 #define MX51_ECSPI_CTRL_MAX_BURST	512
49 /* The maximum bytes that IMX53_ECSPI can transfer in slave mode.*/
50 #define MX53_MAX_TRANSFER_BYTES		512
51 
52 enum spi_imx_devtype {
53 	IMX1_CSPI,
54 	IMX21_CSPI,
55 	IMX27_CSPI,
56 	IMX31_CSPI,
57 	IMX35_CSPI,	/* CSPI on all i.mx except above */
58 	IMX51_ECSPI,	/* ECSPI on i.mx51 */
59 	IMX53_ECSPI,	/* ECSPI on i.mx53 and later */
60 };
61 
62 struct spi_imx_data;
63 
64 struct spi_imx_devtype_data {
65 	void (*intctrl)(struct spi_imx_data *, int);
66 	int (*prepare_message)(struct spi_imx_data *, struct spi_message *);
67 	int (*prepare_transfer)(struct spi_imx_data *, struct spi_device *,
68 				struct spi_transfer *);
69 	void (*trigger)(struct spi_imx_data *);
70 	int (*rx_available)(struct spi_imx_data *);
71 	void (*reset)(struct spi_imx_data *);
72 	void (*setup_wml)(struct spi_imx_data *);
73 	void (*disable)(struct spi_imx_data *);
74 	bool has_dmamode;
75 	bool has_slavemode;
76 	unsigned int fifo_size;
77 	bool dynamic_burst;
78 	enum spi_imx_devtype devtype;
79 };
80 
81 struct spi_imx_data {
82 	struct spi_bitbang bitbang;
83 	struct device *dev;
84 
85 	struct completion xfer_done;
86 	void __iomem *base;
87 	unsigned long base_phys;
88 
89 	struct clk *clk_per;
90 	struct clk *clk_ipg;
91 	unsigned long spi_clk;
92 	unsigned int spi_bus_clk;
93 
94 	unsigned int bits_per_word;
95 	unsigned int spi_drctl;
96 
97 	unsigned int count, remainder;
98 	void (*tx)(struct spi_imx_data *);
99 	void (*rx)(struct spi_imx_data *);
100 	void *rx_buf;
101 	const void *tx_buf;
102 	unsigned int txfifo; /* number of words pushed in tx FIFO */
103 	unsigned int dynamic_burst;
104 
105 	/* Slave mode */
106 	bool slave_mode;
107 	bool slave_aborted;
108 	unsigned int slave_burst;
109 
110 	/* DMA */
111 	bool usedma;
112 	u32 wml;
113 	struct completion dma_rx_completion;
114 	struct completion dma_tx_completion;
115 
116 	const struct spi_imx_devtype_data *devtype_data;
117 };
118 
119 static inline int is_imx27_cspi(struct spi_imx_data *d)
120 {
121 	return d->devtype_data->devtype == IMX27_CSPI;
122 }
123 
124 static inline int is_imx35_cspi(struct spi_imx_data *d)
125 {
126 	return d->devtype_data->devtype == IMX35_CSPI;
127 }
128 
129 static inline int is_imx51_ecspi(struct spi_imx_data *d)
130 {
131 	return d->devtype_data->devtype == IMX51_ECSPI;
132 }
133 
134 static inline int is_imx53_ecspi(struct spi_imx_data *d)
135 {
136 	return d->devtype_data->devtype == IMX53_ECSPI;
137 }
138 
139 #define MXC_SPI_BUF_RX(type)						\
140 static void spi_imx_buf_rx_##type(struct spi_imx_data *spi_imx)		\
141 {									\
142 	unsigned int val = readl(spi_imx->base + MXC_CSPIRXDATA);	\
143 									\
144 	if (spi_imx->rx_buf) {						\
145 		*(type *)spi_imx->rx_buf = val;				\
146 		spi_imx->rx_buf += sizeof(type);			\
147 	}								\
148 									\
149 	spi_imx->remainder -= sizeof(type);				\
150 }
151 
152 #define MXC_SPI_BUF_TX(type)						\
153 static void spi_imx_buf_tx_##type(struct spi_imx_data *spi_imx)		\
154 {									\
155 	type val = 0;							\
156 									\
157 	if (spi_imx->tx_buf) {						\
158 		val = *(type *)spi_imx->tx_buf;				\
159 		spi_imx->tx_buf += sizeof(type);			\
160 	}								\
161 									\
162 	spi_imx->count -= sizeof(type);					\
163 									\
164 	writel(val, spi_imx->base + MXC_CSPITXDATA);			\
165 }
166 
167 MXC_SPI_BUF_RX(u8)
168 MXC_SPI_BUF_TX(u8)
169 MXC_SPI_BUF_RX(u16)
170 MXC_SPI_BUF_TX(u16)
171 MXC_SPI_BUF_RX(u32)
172 MXC_SPI_BUF_TX(u32)
173 
174 /* First entry is reserved, second entry is valid only if SDHC_SPIEN is set
175  * (which is currently not the case in this driver)
176  */
177 static int mxc_clkdivs[] = {0, 3, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128, 192,
178 	256, 384, 512, 768, 1024};
179 
180 /* MX21, MX27 */
181 static unsigned int spi_imx_clkdiv_1(unsigned int fin,
182 		unsigned int fspi, unsigned int max, unsigned int *fres)
183 {
184 	int i;
185 
186 	for (i = 2; i < max; i++)
187 		if (fspi * mxc_clkdivs[i] >= fin)
188 			break;
189 
190 	*fres = fin / mxc_clkdivs[i];
191 	return i;
192 }
193 
194 /* MX1, MX31, MX35, MX51 CSPI */
195 static unsigned int spi_imx_clkdiv_2(unsigned int fin,
196 		unsigned int fspi, unsigned int *fres)
197 {
198 	int i, div = 4;
199 
200 	for (i = 0; i < 7; i++) {
201 		if (fspi * div >= fin)
202 			goto out;
203 		div <<= 1;
204 	}
205 
206 out:
207 	*fres = fin / div;
208 	return i;
209 }
210 
211 static int spi_imx_bytes_per_word(const int bits_per_word)
212 {
213 	if (bits_per_word <= 8)
214 		return 1;
215 	else if (bits_per_word <= 16)
216 		return 2;
217 	else
218 		return 4;
219 }
220 
221 static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
222 			 struct spi_transfer *transfer)
223 {
224 	struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
225 
226 	if (!use_dma)
227 		return false;
228 
229 	if (!master->dma_rx)
230 		return false;
231 
232 	if (spi_imx->slave_mode)
233 		return false;
234 
235 	if (transfer->len < spi_imx->devtype_data->fifo_size)
236 		return false;
237 
238 	spi_imx->dynamic_burst = 0;
239 
240 	return true;
241 }
242 
243 #define MX51_ECSPI_CTRL		0x08
244 #define MX51_ECSPI_CTRL_ENABLE		(1 <<  0)
245 #define MX51_ECSPI_CTRL_XCH		(1 <<  2)
246 #define MX51_ECSPI_CTRL_SMC		(1 << 3)
247 #define MX51_ECSPI_CTRL_MODE_MASK	(0xf << 4)
248 #define MX51_ECSPI_CTRL_DRCTL(drctl)	((drctl) << 16)
249 #define MX51_ECSPI_CTRL_POSTDIV_OFFSET	8
250 #define MX51_ECSPI_CTRL_PREDIV_OFFSET	12
251 #define MX51_ECSPI_CTRL_CS(cs)		((cs) << 18)
252 #define MX51_ECSPI_CTRL_BL_OFFSET	20
253 #define MX51_ECSPI_CTRL_BL_MASK		(0xfff << 20)
254 
255 #define MX51_ECSPI_CONFIG	0x0c
256 #define MX51_ECSPI_CONFIG_SCLKPHA(cs)	(1 << ((cs) +  0))
257 #define MX51_ECSPI_CONFIG_SCLKPOL(cs)	(1 << ((cs) +  4))
258 #define MX51_ECSPI_CONFIG_SBBCTRL(cs)	(1 << ((cs) +  8))
259 #define MX51_ECSPI_CONFIG_SSBPOL(cs)	(1 << ((cs) + 12))
260 #define MX51_ECSPI_CONFIG_SCLKCTL(cs)	(1 << ((cs) + 20))
261 
262 #define MX51_ECSPI_INT		0x10
263 #define MX51_ECSPI_INT_TEEN		(1 <<  0)
264 #define MX51_ECSPI_INT_RREN		(1 <<  3)
265 #define MX51_ECSPI_INT_RDREN		(1 <<  4)
266 
267 #define MX51_ECSPI_DMA		0x14
268 #define MX51_ECSPI_DMA_TX_WML(wml)	((wml) & 0x3f)
269 #define MX51_ECSPI_DMA_RX_WML(wml)	(((wml) & 0x3f) << 16)
270 #define MX51_ECSPI_DMA_RXT_WML(wml)	(((wml) & 0x3f) << 24)
271 
272 #define MX51_ECSPI_DMA_TEDEN		(1 << 7)
273 #define MX51_ECSPI_DMA_RXDEN		(1 << 23)
274 #define MX51_ECSPI_DMA_RXTDEN		(1 << 31)
275 
276 #define MX51_ECSPI_STAT		0x18
277 #define MX51_ECSPI_STAT_RR		(1 <<  3)
278 
279 #define MX51_ECSPI_TESTREG	0x20
280 #define MX51_ECSPI_TESTREG_LBC	BIT(31)
281 
282 static void spi_imx_buf_rx_swap_u32(struct spi_imx_data *spi_imx)
283 {
284 	unsigned int val = readl(spi_imx->base + MXC_CSPIRXDATA);
285 #ifdef __LITTLE_ENDIAN
286 	unsigned int bytes_per_word;
287 #endif
288 
289 	if (spi_imx->rx_buf) {
290 #ifdef __LITTLE_ENDIAN
291 		bytes_per_word = spi_imx_bytes_per_word(spi_imx->bits_per_word);
292 		if (bytes_per_word == 1)
293 			val = cpu_to_be32(val);
294 		else if (bytes_per_word == 2)
295 			val = (val << 16) | (val >> 16);
296 #endif
297 		*(u32 *)spi_imx->rx_buf = val;
298 		spi_imx->rx_buf += sizeof(u32);
299 	}
300 
301 	spi_imx->remainder -= sizeof(u32);
302 }
303 
304 static void spi_imx_buf_rx_swap(struct spi_imx_data *spi_imx)
305 {
306 	int unaligned;
307 	u32 val;
308 
309 	unaligned = spi_imx->remainder % 4;
310 
311 	if (!unaligned) {
312 		spi_imx_buf_rx_swap_u32(spi_imx);
313 		return;
314 	}
315 
316 	if (spi_imx_bytes_per_word(spi_imx->bits_per_word) == 2) {
317 		spi_imx_buf_rx_u16(spi_imx);
318 		return;
319 	}
320 
321 	val = readl(spi_imx->base + MXC_CSPIRXDATA);
322 
323 	while (unaligned--) {
324 		if (spi_imx->rx_buf) {
325 			*(u8 *)spi_imx->rx_buf = (val >> (8 * unaligned)) & 0xff;
326 			spi_imx->rx_buf++;
327 		}
328 		spi_imx->remainder--;
329 	}
330 }
331 
332 static void spi_imx_buf_tx_swap_u32(struct spi_imx_data *spi_imx)
333 {
334 	u32 val = 0;
335 #ifdef __LITTLE_ENDIAN
336 	unsigned int bytes_per_word;
337 #endif
338 
339 	if (spi_imx->tx_buf) {
340 		val = *(u32 *)spi_imx->tx_buf;
341 		spi_imx->tx_buf += sizeof(u32);
342 	}
343 
344 	spi_imx->count -= sizeof(u32);
345 #ifdef __LITTLE_ENDIAN
346 	bytes_per_word = spi_imx_bytes_per_word(spi_imx->bits_per_word);
347 
348 	if (bytes_per_word == 1)
349 		val = cpu_to_be32(val);
350 	else if (bytes_per_word == 2)
351 		val = (val << 16) | (val >> 16);
352 #endif
353 	writel(val, spi_imx->base + MXC_CSPITXDATA);
354 }
355 
356 static void spi_imx_buf_tx_swap(struct spi_imx_data *spi_imx)
357 {
358 	int unaligned;
359 	u32 val = 0;
360 
361 	unaligned = spi_imx->count % 4;
362 
363 	if (!unaligned) {
364 		spi_imx_buf_tx_swap_u32(spi_imx);
365 		return;
366 	}
367 
368 	if (spi_imx_bytes_per_word(spi_imx->bits_per_word) == 2) {
369 		spi_imx_buf_tx_u16(spi_imx);
370 		return;
371 	}
372 
373 	while (unaligned--) {
374 		if (spi_imx->tx_buf) {
375 			val |= *(u8 *)spi_imx->tx_buf << (8 * unaligned);
376 			spi_imx->tx_buf++;
377 		}
378 		spi_imx->count--;
379 	}
380 
381 	writel(val, spi_imx->base + MXC_CSPITXDATA);
382 }
383 
384 static void mx53_ecspi_rx_slave(struct spi_imx_data *spi_imx)
385 {
386 	u32 val = be32_to_cpu(readl(spi_imx->base + MXC_CSPIRXDATA));
387 
388 	if (spi_imx->rx_buf) {
389 		int n_bytes = spi_imx->slave_burst % sizeof(val);
390 
391 		if (!n_bytes)
392 			n_bytes = sizeof(val);
393 
394 		memcpy(spi_imx->rx_buf,
395 		       ((u8 *)&val) + sizeof(val) - n_bytes, n_bytes);
396 
397 		spi_imx->rx_buf += n_bytes;
398 		spi_imx->slave_burst -= n_bytes;
399 	}
400 
401 	spi_imx->remainder -= sizeof(u32);
402 }
403 
404 static void mx53_ecspi_tx_slave(struct spi_imx_data *spi_imx)
405 {
406 	u32 val = 0;
407 	int n_bytes = spi_imx->count % sizeof(val);
408 
409 	if (!n_bytes)
410 		n_bytes = sizeof(val);
411 
412 	if (spi_imx->tx_buf) {
413 		memcpy(((u8 *)&val) + sizeof(val) - n_bytes,
414 		       spi_imx->tx_buf, n_bytes);
415 		val = cpu_to_be32(val);
416 		spi_imx->tx_buf += n_bytes;
417 	}
418 
419 	spi_imx->count -= n_bytes;
420 
421 	writel(val, spi_imx->base + MXC_CSPITXDATA);
422 }
423 
424 /* MX51 eCSPI */
425 static unsigned int mx51_ecspi_clkdiv(struct spi_imx_data *spi_imx,
426 				      unsigned int fspi, unsigned int *fres)
427 {
428 	/*
429 	 * there are two 4-bit dividers, the pre-divider divides by
430 	 * $pre, the post-divider by 2^$post
431 	 */
432 	unsigned int pre, post;
433 	unsigned int fin = spi_imx->spi_clk;
434 
435 	if (unlikely(fspi > fin))
436 		return 0;
437 
438 	post = fls(fin) - fls(fspi);
439 	if (fin > fspi << post)
440 		post++;
441 
442 	/* now we have: (fin <= fspi << post) with post being minimal */
443 
444 	post = max(4U, post) - 4;
445 	if (unlikely(post > 0xf)) {
446 		dev_err(spi_imx->dev, "cannot set clock freq: %u (base freq: %u)\n",
447 				fspi, fin);
448 		return 0xff;
449 	}
450 
451 	pre = DIV_ROUND_UP(fin, fspi << post) - 1;
452 
453 	dev_dbg(spi_imx->dev, "%s: fin: %u, fspi: %u, post: %u, pre: %u\n",
454 			__func__, fin, fspi, post, pre);
455 
456 	/* Resulting frequency for the SCLK line. */
457 	*fres = (fin / (pre + 1)) >> post;
458 
459 	return (pre << MX51_ECSPI_CTRL_PREDIV_OFFSET) |
460 		(post << MX51_ECSPI_CTRL_POSTDIV_OFFSET);
461 }
462 
463 static void mx51_ecspi_intctrl(struct spi_imx_data *spi_imx, int enable)
464 {
465 	unsigned val = 0;
466 
467 	if (enable & MXC_INT_TE)
468 		val |= MX51_ECSPI_INT_TEEN;
469 
470 	if (enable & MXC_INT_RR)
471 		val |= MX51_ECSPI_INT_RREN;
472 
473 	if (enable & MXC_INT_RDR)
474 		val |= MX51_ECSPI_INT_RDREN;
475 
476 	writel(val, spi_imx->base + MX51_ECSPI_INT);
477 }
478 
479 static void mx51_ecspi_trigger(struct spi_imx_data *spi_imx)
480 {
481 	u32 reg;
482 
483 	reg = readl(spi_imx->base + MX51_ECSPI_CTRL);
484 	reg |= MX51_ECSPI_CTRL_XCH;
485 	writel(reg, spi_imx->base + MX51_ECSPI_CTRL);
486 }
487 
488 static void mx51_ecspi_disable(struct spi_imx_data *spi_imx)
489 {
490 	u32 ctrl;
491 
492 	ctrl = readl(spi_imx->base + MX51_ECSPI_CTRL);
493 	ctrl &= ~MX51_ECSPI_CTRL_ENABLE;
494 	writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
495 }
496 
497 static int mx51_ecspi_prepare_message(struct spi_imx_data *spi_imx,
498 				      struct spi_message *msg)
499 {
500 	struct spi_device *spi = msg->spi;
501 	u32 ctrl = MX51_ECSPI_CTRL_ENABLE;
502 	u32 testreg;
503 	u32 cfg = readl(spi_imx->base + MX51_ECSPI_CONFIG);
504 
505 	/* set Master or Slave mode */
506 	if (spi_imx->slave_mode)
507 		ctrl &= ~MX51_ECSPI_CTRL_MODE_MASK;
508 	else
509 		ctrl |= MX51_ECSPI_CTRL_MODE_MASK;
510 
511 	/*
512 	 * Enable SPI_RDY handling (falling edge/level triggered).
513 	 */
514 	if (spi->mode & SPI_READY)
515 		ctrl |= MX51_ECSPI_CTRL_DRCTL(spi_imx->spi_drctl);
516 
517 	/* set chip select to use */
518 	ctrl |= MX51_ECSPI_CTRL_CS(spi->chip_select);
519 
520 	/*
521 	 * The ctrl register must be written first, with the EN bit set other
522 	 * registers must not be written to.
523 	 */
524 	writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
525 
526 	testreg = readl(spi_imx->base + MX51_ECSPI_TESTREG);
527 	if (spi->mode & SPI_LOOP)
528 		testreg |= MX51_ECSPI_TESTREG_LBC;
529 	else
530 		testreg &= ~MX51_ECSPI_TESTREG_LBC;
531 	writel(testreg, spi_imx->base + MX51_ECSPI_TESTREG);
532 
533 	/*
534 	 * eCSPI burst completion by Chip Select signal in Slave mode
535 	 * is not functional for imx53 Soc, config SPI burst completed when
536 	 * BURST_LENGTH + 1 bits are received
537 	 */
538 	if (spi_imx->slave_mode && is_imx53_ecspi(spi_imx))
539 		cfg &= ~MX51_ECSPI_CONFIG_SBBCTRL(spi->chip_select);
540 	else
541 		cfg |= MX51_ECSPI_CONFIG_SBBCTRL(spi->chip_select);
542 
543 	if (spi->mode & SPI_CPHA)
544 		cfg |= MX51_ECSPI_CONFIG_SCLKPHA(spi->chip_select);
545 	else
546 		cfg &= ~MX51_ECSPI_CONFIG_SCLKPHA(spi->chip_select);
547 
548 	if (spi->mode & SPI_CPOL) {
549 		cfg |= MX51_ECSPI_CONFIG_SCLKPOL(spi->chip_select);
550 		cfg |= MX51_ECSPI_CONFIG_SCLKCTL(spi->chip_select);
551 	} else {
552 		cfg &= ~MX51_ECSPI_CONFIG_SCLKPOL(spi->chip_select);
553 		cfg &= ~MX51_ECSPI_CONFIG_SCLKCTL(spi->chip_select);
554 	}
555 
556 	if (spi->mode & SPI_CS_HIGH)
557 		cfg |= MX51_ECSPI_CONFIG_SSBPOL(spi->chip_select);
558 	else
559 		cfg &= ~MX51_ECSPI_CONFIG_SSBPOL(spi->chip_select);
560 
561 	writel(cfg, spi_imx->base + MX51_ECSPI_CONFIG);
562 
563 	return 0;
564 }
565 
566 static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
567 				       struct spi_device *spi,
568 				       struct spi_transfer *t)
569 {
570 	u32 ctrl = readl(spi_imx->base + MX51_ECSPI_CTRL);
571 	u32 clk = t->speed_hz, delay;
572 
573 	/* Clear BL field and set the right value */
574 	ctrl &= ~MX51_ECSPI_CTRL_BL_MASK;
575 	if (spi_imx->slave_mode && is_imx53_ecspi(spi_imx))
576 		ctrl |= (spi_imx->slave_burst * 8 - 1)
577 			<< MX51_ECSPI_CTRL_BL_OFFSET;
578 	else
579 		ctrl |= (spi_imx->bits_per_word - 1)
580 			<< MX51_ECSPI_CTRL_BL_OFFSET;
581 
582 	/* set clock speed */
583 	ctrl &= ~(0xf << MX51_ECSPI_CTRL_POSTDIV_OFFSET |
584 		  0xf << MX51_ECSPI_CTRL_PREDIV_OFFSET);
585 	ctrl |= mx51_ecspi_clkdiv(spi_imx, t->speed_hz, &clk);
586 	spi_imx->spi_bus_clk = clk;
587 
588 	if (spi_imx->usedma)
589 		ctrl |= MX51_ECSPI_CTRL_SMC;
590 
591 	writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
592 
593 	/*
594 	 * Wait until the changes in the configuration register CONFIGREG
595 	 * propagate into the hardware. It takes exactly one tick of the
596 	 * SCLK clock, but we will wait two SCLK clock just to be sure. The
597 	 * effect of the delay it takes for the hardware to apply changes
598 	 * is noticable if the SCLK clock run very slow. In such a case, if
599 	 * the polarity of SCLK should be inverted, the GPIO ChipSelect might
600 	 * be asserted before the SCLK polarity changes, which would disrupt
601 	 * the SPI communication as the device on the other end would consider
602 	 * the change of SCLK polarity as a clock tick already.
603 	 */
604 	delay = (2 * 1000000) / clk;
605 	if (likely(delay < 10))	/* SCLK is faster than 100 kHz */
606 		udelay(delay);
607 	else			/* SCLK is _very_ slow */
608 		usleep_range(delay, delay + 10);
609 
610 	return 0;
611 }
612 
613 static void mx51_setup_wml(struct spi_imx_data *spi_imx)
614 {
615 	/*
616 	 * Configure the DMA register: setup the watermark
617 	 * and enable DMA request.
618 	 */
619 	writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) |
620 		MX51_ECSPI_DMA_TX_WML(spi_imx->wml) |
621 		MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) |
622 		MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN |
623 		MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA);
624 }
625 
626 static int mx51_ecspi_rx_available(struct spi_imx_data *spi_imx)
627 {
628 	return readl(spi_imx->base + MX51_ECSPI_STAT) & MX51_ECSPI_STAT_RR;
629 }
630 
631 static void mx51_ecspi_reset(struct spi_imx_data *spi_imx)
632 {
633 	/* drain receive buffer */
634 	while (mx51_ecspi_rx_available(spi_imx))
635 		readl(spi_imx->base + MXC_CSPIRXDATA);
636 }
637 
638 #define MX31_INTREG_TEEN	(1 << 0)
639 #define MX31_INTREG_RREN	(1 << 3)
640 
641 #define MX31_CSPICTRL_ENABLE	(1 << 0)
642 #define MX31_CSPICTRL_MASTER	(1 << 1)
643 #define MX31_CSPICTRL_XCH	(1 << 2)
644 #define MX31_CSPICTRL_SMC	(1 << 3)
645 #define MX31_CSPICTRL_POL	(1 << 4)
646 #define MX31_CSPICTRL_PHA	(1 << 5)
647 #define MX31_CSPICTRL_SSCTL	(1 << 6)
648 #define MX31_CSPICTRL_SSPOL	(1 << 7)
649 #define MX31_CSPICTRL_BC_SHIFT	8
650 #define MX35_CSPICTRL_BL_SHIFT	20
651 #define MX31_CSPICTRL_CS_SHIFT	24
652 #define MX35_CSPICTRL_CS_SHIFT	12
653 #define MX31_CSPICTRL_DR_SHIFT	16
654 
655 #define MX31_CSPI_DMAREG	0x10
656 #define MX31_DMAREG_RH_DEN	(1<<4)
657 #define MX31_DMAREG_TH_DEN	(1<<1)
658 
659 #define MX31_CSPISTATUS		0x14
660 #define MX31_STATUS_RR		(1 << 3)
661 
662 #define MX31_CSPI_TESTREG	0x1C
663 #define MX31_TEST_LBC		(1 << 14)
664 
665 /* These functions also work for the i.MX35, but be aware that
666  * the i.MX35 has a slightly different register layout for bits
667  * we do not use here.
668  */
669 static void mx31_intctrl(struct spi_imx_data *spi_imx, int enable)
670 {
671 	unsigned int val = 0;
672 
673 	if (enable & MXC_INT_TE)
674 		val |= MX31_INTREG_TEEN;
675 	if (enable & MXC_INT_RR)
676 		val |= MX31_INTREG_RREN;
677 
678 	writel(val, spi_imx->base + MXC_CSPIINT);
679 }
680 
681 static void mx31_trigger(struct spi_imx_data *spi_imx)
682 {
683 	unsigned int reg;
684 
685 	reg = readl(spi_imx->base + MXC_CSPICTRL);
686 	reg |= MX31_CSPICTRL_XCH;
687 	writel(reg, spi_imx->base + MXC_CSPICTRL);
688 }
689 
690 static int mx31_prepare_message(struct spi_imx_data *spi_imx,
691 				struct spi_message *msg)
692 {
693 	return 0;
694 }
695 
696 static int mx31_prepare_transfer(struct spi_imx_data *spi_imx,
697 				 struct spi_device *spi,
698 				 struct spi_transfer *t)
699 {
700 	unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER;
701 	unsigned int clk;
702 
703 	reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, t->speed_hz, &clk) <<
704 		MX31_CSPICTRL_DR_SHIFT;
705 	spi_imx->spi_bus_clk = clk;
706 
707 	if (is_imx35_cspi(spi_imx)) {
708 		reg |= (spi_imx->bits_per_word - 1) << MX35_CSPICTRL_BL_SHIFT;
709 		reg |= MX31_CSPICTRL_SSCTL;
710 	} else {
711 		reg |= (spi_imx->bits_per_word - 1) << MX31_CSPICTRL_BC_SHIFT;
712 	}
713 
714 	if (spi->mode & SPI_CPHA)
715 		reg |= MX31_CSPICTRL_PHA;
716 	if (spi->mode & SPI_CPOL)
717 		reg |= MX31_CSPICTRL_POL;
718 	if (spi->mode & SPI_CS_HIGH)
719 		reg |= MX31_CSPICTRL_SSPOL;
720 	if (!gpio_is_valid(spi->cs_gpio))
721 		reg |= (spi->chip_select) <<
722 			(is_imx35_cspi(spi_imx) ? MX35_CSPICTRL_CS_SHIFT :
723 						  MX31_CSPICTRL_CS_SHIFT);
724 
725 	if (spi_imx->usedma)
726 		reg |= MX31_CSPICTRL_SMC;
727 
728 	writel(reg, spi_imx->base + MXC_CSPICTRL);
729 
730 	reg = readl(spi_imx->base + MX31_CSPI_TESTREG);
731 	if (spi->mode & SPI_LOOP)
732 		reg |= MX31_TEST_LBC;
733 	else
734 		reg &= ~MX31_TEST_LBC;
735 	writel(reg, spi_imx->base + MX31_CSPI_TESTREG);
736 
737 	if (spi_imx->usedma) {
738 		/*
739 		 * configure DMA requests when RXFIFO is half full and
740 		 * when TXFIFO is half empty
741 		 */
742 		writel(MX31_DMAREG_RH_DEN | MX31_DMAREG_TH_DEN,
743 			spi_imx->base + MX31_CSPI_DMAREG);
744 	}
745 
746 	return 0;
747 }
748 
749 static int mx31_rx_available(struct spi_imx_data *spi_imx)
750 {
751 	return readl(spi_imx->base + MX31_CSPISTATUS) & MX31_STATUS_RR;
752 }
753 
754 static void mx31_reset(struct spi_imx_data *spi_imx)
755 {
756 	/* drain receive buffer */
757 	while (readl(spi_imx->base + MX31_CSPISTATUS) & MX31_STATUS_RR)
758 		readl(spi_imx->base + MXC_CSPIRXDATA);
759 }
760 
761 #define MX21_INTREG_RR		(1 << 4)
762 #define MX21_INTREG_TEEN	(1 << 9)
763 #define MX21_INTREG_RREN	(1 << 13)
764 
765 #define MX21_CSPICTRL_POL	(1 << 5)
766 #define MX21_CSPICTRL_PHA	(1 << 6)
767 #define MX21_CSPICTRL_SSPOL	(1 << 8)
768 #define MX21_CSPICTRL_XCH	(1 << 9)
769 #define MX21_CSPICTRL_ENABLE	(1 << 10)
770 #define MX21_CSPICTRL_MASTER	(1 << 11)
771 #define MX21_CSPICTRL_DR_SHIFT	14
772 #define MX21_CSPICTRL_CS_SHIFT	19
773 
774 static void mx21_intctrl(struct spi_imx_data *spi_imx, int enable)
775 {
776 	unsigned int val = 0;
777 
778 	if (enable & MXC_INT_TE)
779 		val |= MX21_INTREG_TEEN;
780 	if (enable & MXC_INT_RR)
781 		val |= MX21_INTREG_RREN;
782 
783 	writel(val, spi_imx->base + MXC_CSPIINT);
784 }
785 
786 static void mx21_trigger(struct spi_imx_data *spi_imx)
787 {
788 	unsigned int reg;
789 
790 	reg = readl(spi_imx->base + MXC_CSPICTRL);
791 	reg |= MX21_CSPICTRL_XCH;
792 	writel(reg, spi_imx->base + MXC_CSPICTRL);
793 }
794 
795 static int mx21_prepare_message(struct spi_imx_data *spi_imx,
796 				struct spi_message *msg)
797 {
798 	return 0;
799 }
800 
801 static int mx21_prepare_transfer(struct spi_imx_data *spi_imx,
802 				 struct spi_device *spi,
803 				 struct spi_transfer *t)
804 {
805 	unsigned int reg = MX21_CSPICTRL_ENABLE | MX21_CSPICTRL_MASTER;
806 	unsigned int max = is_imx27_cspi(spi_imx) ? 16 : 18;
807 	unsigned int clk;
808 
809 	reg |= spi_imx_clkdiv_1(spi_imx->spi_clk, t->speed_hz, max, &clk)
810 		<< MX21_CSPICTRL_DR_SHIFT;
811 	spi_imx->spi_bus_clk = clk;
812 
813 	reg |= spi_imx->bits_per_word - 1;
814 
815 	if (spi->mode & SPI_CPHA)
816 		reg |= MX21_CSPICTRL_PHA;
817 	if (spi->mode & SPI_CPOL)
818 		reg |= MX21_CSPICTRL_POL;
819 	if (spi->mode & SPI_CS_HIGH)
820 		reg |= MX21_CSPICTRL_SSPOL;
821 	if (!gpio_is_valid(spi->cs_gpio))
822 		reg |= spi->chip_select << MX21_CSPICTRL_CS_SHIFT;
823 
824 	writel(reg, spi_imx->base + MXC_CSPICTRL);
825 
826 	return 0;
827 }
828 
829 static int mx21_rx_available(struct spi_imx_data *spi_imx)
830 {
831 	return readl(spi_imx->base + MXC_CSPIINT) & MX21_INTREG_RR;
832 }
833 
834 static void mx21_reset(struct spi_imx_data *spi_imx)
835 {
836 	writel(1, spi_imx->base + MXC_RESET);
837 }
838 
839 #define MX1_INTREG_RR		(1 << 3)
840 #define MX1_INTREG_TEEN		(1 << 8)
841 #define MX1_INTREG_RREN		(1 << 11)
842 
843 #define MX1_CSPICTRL_POL	(1 << 4)
844 #define MX1_CSPICTRL_PHA	(1 << 5)
845 #define MX1_CSPICTRL_XCH	(1 << 8)
846 #define MX1_CSPICTRL_ENABLE	(1 << 9)
847 #define MX1_CSPICTRL_MASTER	(1 << 10)
848 #define MX1_CSPICTRL_DR_SHIFT	13
849 
850 static void mx1_intctrl(struct spi_imx_data *spi_imx, int enable)
851 {
852 	unsigned int val = 0;
853 
854 	if (enable & MXC_INT_TE)
855 		val |= MX1_INTREG_TEEN;
856 	if (enable & MXC_INT_RR)
857 		val |= MX1_INTREG_RREN;
858 
859 	writel(val, spi_imx->base + MXC_CSPIINT);
860 }
861 
862 static void mx1_trigger(struct spi_imx_data *spi_imx)
863 {
864 	unsigned int reg;
865 
866 	reg = readl(spi_imx->base + MXC_CSPICTRL);
867 	reg |= MX1_CSPICTRL_XCH;
868 	writel(reg, spi_imx->base + MXC_CSPICTRL);
869 }
870 
871 static int mx1_prepare_message(struct spi_imx_data *spi_imx,
872 			       struct spi_message *msg)
873 {
874 	return 0;
875 }
876 
877 static int mx1_prepare_transfer(struct spi_imx_data *spi_imx,
878 				struct spi_device *spi,
879 				struct spi_transfer *t)
880 {
881 	unsigned int reg = MX1_CSPICTRL_ENABLE | MX1_CSPICTRL_MASTER;
882 	unsigned int clk;
883 
884 	reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, t->speed_hz, &clk) <<
885 		MX1_CSPICTRL_DR_SHIFT;
886 	spi_imx->spi_bus_clk = clk;
887 
888 	reg |= spi_imx->bits_per_word - 1;
889 
890 	if (spi->mode & SPI_CPHA)
891 		reg |= MX1_CSPICTRL_PHA;
892 	if (spi->mode & SPI_CPOL)
893 		reg |= MX1_CSPICTRL_POL;
894 
895 	writel(reg, spi_imx->base + MXC_CSPICTRL);
896 
897 	return 0;
898 }
899 
900 static int mx1_rx_available(struct spi_imx_data *spi_imx)
901 {
902 	return readl(spi_imx->base + MXC_CSPIINT) & MX1_INTREG_RR;
903 }
904 
905 static void mx1_reset(struct spi_imx_data *spi_imx)
906 {
907 	writel(1, spi_imx->base + MXC_RESET);
908 }
909 
910 static struct spi_imx_devtype_data imx1_cspi_devtype_data = {
911 	.intctrl = mx1_intctrl,
912 	.prepare_message = mx1_prepare_message,
913 	.prepare_transfer = mx1_prepare_transfer,
914 	.trigger = mx1_trigger,
915 	.rx_available = mx1_rx_available,
916 	.reset = mx1_reset,
917 	.fifo_size = 8,
918 	.has_dmamode = false,
919 	.dynamic_burst = false,
920 	.has_slavemode = false,
921 	.devtype = IMX1_CSPI,
922 };
923 
924 static struct spi_imx_devtype_data imx21_cspi_devtype_data = {
925 	.intctrl = mx21_intctrl,
926 	.prepare_message = mx21_prepare_message,
927 	.prepare_transfer = mx21_prepare_transfer,
928 	.trigger = mx21_trigger,
929 	.rx_available = mx21_rx_available,
930 	.reset = mx21_reset,
931 	.fifo_size = 8,
932 	.has_dmamode = false,
933 	.dynamic_burst = false,
934 	.has_slavemode = false,
935 	.devtype = IMX21_CSPI,
936 };
937 
938 static struct spi_imx_devtype_data imx27_cspi_devtype_data = {
939 	/* i.mx27 cspi shares the functions with i.mx21 one */
940 	.intctrl = mx21_intctrl,
941 	.prepare_message = mx21_prepare_message,
942 	.prepare_transfer = mx21_prepare_transfer,
943 	.trigger = mx21_trigger,
944 	.rx_available = mx21_rx_available,
945 	.reset = mx21_reset,
946 	.fifo_size = 8,
947 	.has_dmamode = false,
948 	.dynamic_burst = false,
949 	.has_slavemode = false,
950 	.devtype = IMX27_CSPI,
951 };
952 
953 static struct spi_imx_devtype_data imx31_cspi_devtype_data = {
954 	.intctrl = mx31_intctrl,
955 	.prepare_message = mx31_prepare_message,
956 	.prepare_transfer = mx31_prepare_transfer,
957 	.trigger = mx31_trigger,
958 	.rx_available = mx31_rx_available,
959 	.reset = mx31_reset,
960 	.fifo_size = 8,
961 	.has_dmamode = false,
962 	.dynamic_burst = false,
963 	.has_slavemode = false,
964 	.devtype = IMX31_CSPI,
965 };
966 
967 static struct spi_imx_devtype_data imx35_cspi_devtype_data = {
968 	/* i.mx35 and later cspi shares the functions with i.mx31 one */
969 	.intctrl = mx31_intctrl,
970 	.prepare_message = mx31_prepare_message,
971 	.prepare_transfer = mx31_prepare_transfer,
972 	.trigger = mx31_trigger,
973 	.rx_available = mx31_rx_available,
974 	.reset = mx31_reset,
975 	.fifo_size = 8,
976 	.has_dmamode = true,
977 	.dynamic_burst = false,
978 	.has_slavemode = false,
979 	.devtype = IMX35_CSPI,
980 };
981 
982 static struct spi_imx_devtype_data imx51_ecspi_devtype_data = {
983 	.intctrl = mx51_ecspi_intctrl,
984 	.prepare_message = mx51_ecspi_prepare_message,
985 	.prepare_transfer = mx51_ecspi_prepare_transfer,
986 	.trigger = mx51_ecspi_trigger,
987 	.rx_available = mx51_ecspi_rx_available,
988 	.reset = mx51_ecspi_reset,
989 	.setup_wml = mx51_setup_wml,
990 	.fifo_size = 64,
991 	.has_dmamode = true,
992 	.dynamic_burst = true,
993 	.has_slavemode = true,
994 	.disable = mx51_ecspi_disable,
995 	.devtype = IMX51_ECSPI,
996 };
997 
998 static struct spi_imx_devtype_data imx53_ecspi_devtype_data = {
999 	.intctrl = mx51_ecspi_intctrl,
1000 	.prepare_message = mx51_ecspi_prepare_message,
1001 	.prepare_transfer = mx51_ecspi_prepare_transfer,
1002 	.trigger = mx51_ecspi_trigger,
1003 	.rx_available = mx51_ecspi_rx_available,
1004 	.reset = mx51_ecspi_reset,
1005 	.fifo_size = 64,
1006 	.has_dmamode = true,
1007 	.has_slavemode = true,
1008 	.disable = mx51_ecspi_disable,
1009 	.devtype = IMX53_ECSPI,
1010 };
1011 
1012 static const struct platform_device_id spi_imx_devtype[] = {
1013 	{
1014 		.name = "imx1-cspi",
1015 		.driver_data = (kernel_ulong_t) &imx1_cspi_devtype_data,
1016 	}, {
1017 		.name = "imx21-cspi",
1018 		.driver_data = (kernel_ulong_t) &imx21_cspi_devtype_data,
1019 	}, {
1020 		.name = "imx27-cspi",
1021 		.driver_data = (kernel_ulong_t) &imx27_cspi_devtype_data,
1022 	}, {
1023 		.name = "imx31-cspi",
1024 		.driver_data = (kernel_ulong_t) &imx31_cspi_devtype_data,
1025 	}, {
1026 		.name = "imx35-cspi",
1027 		.driver_data = (kernel_ulong_t) &imx35_cspi_devtype_data,
1028 	}, {
1029 		.name = "imx51-ecspi",
1030 		.driver_data = (kernel_ulong_t) &imx51_ecspi_devtype_data,
1031 	}, {
1032 		.name = "imx53-ecspi",
1033 		.driver_data = (kernel_ulong_t) &imx53_ecspi_devtype_data,
1034 	}, {
1035 		/* sentinel */
1036 	}
1037 };
1038 
1039 static const struct of_device_id spi_imx_dt_ids[] = {
1040 	{ .compatible = "fsl,imx1-cspi", .data = &imx1_cspi_devtype_data, },
1041 	{ .compatible = "fsl,imx21-cspi", .data = &imx21_cspi_devtype_data, },
1042 	{ .compatible = "fsl,imx27-cspi", .data = &imx27_cspi_devtype_data, },
1043 	{ .compatible = "fsl,imx31-cspi", .data = &imx31_cspi_devtype_data, },
1044 	{ .compatible = "fsl,imx35-cspi", .data = &imx35_cspi_devtype_data, },
1045 	{ .compatible = "fsl,imx51-ecspi", .data = &imx51_ecspi_devtype_data, },
1046 	{ .compatible = "fsl,imx53-ecspi", .data = &imx53_ecspi_devtype_data, },
1047 	{ /* sentinel */ }
1048 };
1049 MODULE_DEVICE_TABLE(of, spi_imx_dt_ids);
1050 
1051 static void spi_imx_chipselect(struct spi_device *spi, int is_active)
1052 {
1053 	int active = is_active != BITBANG_CS_INACTIVE;
1054 	int dev_is_lowactive = !(spi->mode & SPI_CS_HIGH);
1055 
1056 	if (spi->mode & SPI_NO_CS)
1057 		return;
1058 
1059 	if (!gpio_is_valid(spi->cs_gpio))
1060 		return;
1061 
1062 	gpio_set_value(spi->cs_gpio, dev_is_lowactive ^ active);
1063 }
1064 
1065 static void spi_imx_set_burst_len(struct spi_imx_data *spi_imx, int n_bits)
1066 {
1067 	u32 ctrl;
1068 
1069 	ctrl = readl(spi_imx->base + MX51_ECSPI_CTRL);
1070 	ctrl &= ~MX51_ECSPI_CTRL_BL_MASK;
1071 	ctrl |= ((n_bits - 1) << MX51_ECSPI_CTRL_BL_OFFSET);
1072 	writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
1073 }
1074 
1075 static void spi_imx_push(struct spi_imx_data *spi_imx)
1076 {
1077 	unsigned int burst_len, fifo_words;
1078 
1079 	if (spi_imx->dynamic_burst)
1080 		fifo_words = 4;
1081 	else
1082 		fifo_words = spi_imx_bytes_per_word(spi_imx->bits_per_word);
1083 	/*
1084 	 * Reload the FIFO when the remaining bytes to be transferred in the
1085 	 * current burst is 0. This only applies when bits_per_word is a
1086 	 * multiple of 8.
1087 	 */
1088 	if (!spi_imx->remainder) {
1089 		if (spi_imx->dynamic_burst) {
1090 
1091 			/* We need to deal unaligned data first */
1092 			burst_len = spi_imx->count % MX51_ECSPI_CTRL_MAX_BURST;
1093 
1094 			if (!burst_len)
1095 				burst_len = MX51_ECSPI_CTRL_MAX_BURST;
1096 
1097 			spi_imx_set_burst_len(spi_imx, burst_len * 8);
1098 
1099 			spi_imx->remainder = burst_len;
1100 		} else {
1101 			spi_imx->remainder = fifo_words;
1102 		}
1103 	}
1104 
1105 	while (spi_imx->txfifo < spi_imx->devtype_data->fifo_size) {
1106 		if (!spi_imx->count)
1107 			break;
1108 		if (spi_imx->dynamic_burst &&
1109 		    spi_imx->txfifo >= DIV_ROUND_UP(spi_imx->remainder,
1110 						     fifo_words))
1111 			break;
1112 		spi_imx->tx(spi_imx);
1113 		spi_imx->txfifo++;
1114 	}
1115 
1116 	if (!spi_imx->slave_mode)
1117 		spi_imx->devtype_data->trigger(spi_imx);
1118 }
1119 
1120 static irqreturn_t spi_imx_isr(int irq, void *dev_id)
1121 {
1122 	struct spi_imx_data *spi_imx = dev_id;
1123 
1124 	while (spi_imx->txfifo &&
1125 	       spi_imx->devtype_data->rx_available(spi_imx)) {
1126 		spi_imx->rx(spi_imx);
1127 		spi_imx->txfifo--;
1128 	}
1129 
1130 	if (spi_imx->count) {
1131 		spi_imx_push(spi_imx);
1132 		return IRQ_HANDLED;
1133 	}
1134 
1135 	if (spi_imx->txfifo) {
1136 		/* No data left to push, but still waiting for rx data,
1137 		 * enable receive data available interrupt.
1138 		 */
1139 		spi_imx->devtype_data->intctrl(
1140 				spi_imx, MXC_INT_RR);
1141 		return IRQ_HANDLED;
1142 	}
1143 
1144 	spi_imx->devtype_data->intctrl(spi_imx, 0);
1145 	complete(&spi_imx->xfer_done);
1146 
1147 	return IRQ_HANDLED;
1148 }
1149 
1150 static int spi_imx_dma_configure(struct spi_master *master)
1151 {
1152 	int ret;
1153 	enum dma_slave_buswidth buswidth;
1154 	struct dma_slave_config rx = {}, tx = {};
1155 	struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
1156 
1157 	switch (spi_imx_bytes_per_word(spi_imx->bits_per_word)) {
1158 	case 4:
1159 		buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES;
1160 		break;
1161 	case 2:
1162 		buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES;
1163 		break;
1164 	case 1:
1165 		buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE;
1166 		break;
1167 	default:
1168 		return -EINVAL;
1169 	}
1170 
1171 	tx.direction = DMA_MEM_TO_DEV;
1172 	tx.dst_addr = spi_imx->base_phys + MXC_CSPITXDATA;
1173 	tx.dst_addr_width = buswidth;
1174 	tx.dst_maxburst = spi_imx->wml;
1175 	ret = dmaengine_slave_config(master->dma_tx, &tx);
1176 	if (ret) {
1177 		dev_err(spi_imx->dev, "TX dma configuration failed with %d\n", ret);
1178 		return ret;
1179 	}
1180 
1181 	rx.direction = DMA_DEV_TO_MEM;
1182 	rx.src_addr = spi_imx->base_phys + MXC_CSPIRXDATA;
1183 	rx.src_addr_width = buswidth;
1184 	rx.src_maxburst = spi_imx->wml;
1185 	ret = dmaengine_slave_config(master->dma_rx, &rx);
1186 	if (ret) {
1187 		dev_err(spi_imx->dev, "RX dma configuration failed with %d\n", ret);
1188 		return ret;
1189 	}
1190 
1191 	return 0;
1192 }
1193 
1194 static int spi_imx_setupxfer(struct spi_device *spi,
1195 				 struct spi_transfer *t)
1196 {
1197 	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
1198 
1199 	if (!t)
1200 		return 0;
1201 
1202 	spi_imx->bits_per_word = t->bits_per_word;
1203 
1204 	/*
1205 	 * Initialize the functions for transfer. To transfer non byte-aligned
1206 	 * words, we have to use multiple word-size bursts, we can't use
1207 	 * dynamic_burst in that case.
1208 	 */
1209 	if (spi_imx->devtype_data->dynamic_burst && !spi_imx->slave_mode &&
1210 	    (spi_imx->bits_per_word == 8 ||
1211 	    spi_imx->bits_per_word == 16 ||
1212 	    spi_imx->bits_per_word == 32)) {
1213 
1214 		spi_imx->rx = spi_imx_buf_rx_swap;
1215 		spi_imx->tx = spi_imx_buf_tx_swap;
1216 		spi_imx->dynamic_burst = 1;
1217 
1218 	} else {
1219 		if (spi_imx->bits_per_word <= 8) {
1220 			spi_imx->rx = spi_imx_buf_rx_u8;
1221 			spi_imx->tx = spi_imx_buf_tx_u8;
1222 		} else if (spi_imx->bits_per_word <= 16) {
1223 			spi_imx->rx = spi_imx_buf_rx_u16;
1224 			spi_imx->tx = spi_imx_buf_tx_u16;
1225 		} else {
1226 			spi_imx->rx = spi_imx_buf_rx_u32;
1227 			spi_imx->tx = spi_imx_buf_tx_u32;
1228 		}
1229 		spi_imx->dynamic_burst = 0;
1230 	}
1231 
1232 	if (spi_imx_can_dma(spi_imx->bitbang.master, spi, t))
1233 		spi_imx->usedma = true;
1234 	else
1235 		spi_imx->usedma = false;
1236 
1237 	if (is_imx53_ecspi(spi_imx) && spi_imx->slave_mode) {
1238 		spi_imx->rx = mx53_ecspi_rx_slave;
1239 		spi_imx->tx = mx53_ecspi_tx_slave;
1240 		spi_imx->slave_burst = t->len;
1241 	}
1242 
1243 	spi_imx->devtype_data->prepare_transfer(spi_imx, spi, t);
1244 
1245 	return 0;
1246 }
1247 
1248 static void spi_imx_sdma_exit(struct spi_imx_data *spi_imx)
1249 {
1250 	struct spi_master *master = spi_imx->bitbang.master;
1251 
1252 	if (master->dma_rx) {
1253 		dma_release_channel(master->dma_rx);
1254 		master->dma_rx = NULL;
1255 	}
1256 
1257 	if (master->dma_tx) {
1258 		dma_release_channel(master->dma_tx);
1259 		master->dma_tx = NULL;
1260 	}
1261 }
1262 
1263 static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
1264 			     struct spi_master *master)
1265 {
1266 	int ret;
1267 
1268 	/* use pio mode for i.mx6dl chip TKT238285 */
1269 	if (of_machine_is_compatible("fsl,imx6dl"))
1270 		return 0;
1271 
1272 	spi_imx->wml = spi_imx->devtype_data->fifo_size / 2;
1273 
1274 	/* Prepare for TX DMA: */
1275 	master->dma_tx = dma_request_chan(dev, "tx");
1276 	if (IS_ERR(master->dma_tx)) {
1277 		ret = PTR_ERR(master->dma_tx);
1278 		dev_dbg(dev, "can't get the TX DMA channel, error %d!\n", ret);
1279 		master->dma_tx = NULL;
1280 		goto err;
1281 	}
1282 
1283 	/* Prepare for RX : */
1284 	master->dma_rx = dma_request_chan(dev, "rx");
1285 	if (IS_ERR(master->dma_rx)) {
1286 		ret = PTR_ERR(master->dma_rx);
1287 		dev_dbg(dev, "can't get the RX DMA channel, error %d\n", ret);
1288 		master->dma_rx = NULL;
1289 		goto err;
1290 	}
1291 
1292 	init_completion(&spi_imx->dma_rx_completion);
1293 	init_completion(&spi_imx->dma_tx_completion);
1294 	master->can_dma = spi_imx_can_dma;
1295 	master->max_dma_len = MAX_SDMA_BD_BYTES;
1296 	spi_imx->bitbang.master->flags = SPI_MASTER_MUST_RX |
1297 					 SPI_MASTER_MUST_TX;
1298 
1299 	return 0;
1300 err:
1301 	spi_imx_sdma_exit(spi_imx);
1302 	return ret;
1303 }
1304 
1305 static void spi_imx_dma_rx_callback(void *cookie)
1306 {
1307 	struct spi_imx_data *spi_imx = (struct spi_imx_data *)cookie;
1308 
1309 	complete(&spi_imx->dma_rx_completion);
1310 }
1311 
1312 static void spi_imx_dma_tx_callback(void *cookie)
1313 {
1314 	struct spi_imx_data *spi_imx = (struct spi_imx_data *)cookie;
1315 
1316 	complete(&spi_imx->dma_tx_completion);
1317 }
1318 
1319 static int spi_imx_calculate_timeout(struct spi_imx_data *spi_imx, int size)
1320 {
1321 	unsigned long timeout = 0;
1322 
1323 	/* Time with actual data transfer and CS change delay related to HW */
1324 	timeout = (8 + 4) * size / spi_imx->spi_bus_clk;
1325 
1326 	/* Add extra second for scheduler related activities */
1327 	timeout += 1;
1328 
1329 	/* Double calculated timeout */
1330 	return msecs_to_jiffies(2 * timeout * MSEC_PER_SEC);
1331 }
1332 
1333 static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
1334 				struct spi_transfer *transfer)
1335 {
1336 	struct dma_async_tx_descriptor *desc_tx, *desc_rx;
1337 	unsigned long transfer_timeout;
1338 	unsigned long timeout;
1339 	struct spi_master *master = spi_imx->bitbang.master;
1340 	struct sg_table *tx = &transfer->tx_sg, *rx = &transfer->rx_sg;
1341 	struct scatterlist *last_sg = sg_last(rx->sgl, rx->nents);
1342 	unsigned int bytes_per_word, i;
1343 	int ret;
1344 
1345 	/* Get the right burst length from the last sg to ensure no tail data */
1346 	bytes_per_word = spi_imx_bytes_per_word(transfer->bits_per_word);
1347 	for (i = spi_imx->devtype_data->fifo_size / 2; i > 0; i--) {
1348 		if (!(sg_dma_len(last_sg) % (i * bytes_per_word)))
1349 			break;
1350 	}
1351 	/* Use 1 as wml in case no available burst length got */
1352 	if (i == 0)
1353 		i = 1;
1354 
1355 	spi_imx->wml =  i;
1356 
1357 	ret = spi_imx_dma_configure(master);
1358 	if (ret)
1359 		return ret;
1360 
1361 	if (!spi_imx->devtype_data->setup_wml) {
1362 		dev_err(spi_imx->dev, "No setup_wml()?\n");
1363 		return -EINVAL;
1364 	}
1365 	spi_imx->devtype_data->setup_wml(spi_imx);
1366 
1367 	/*
1368 	 * The TX DMA setup starts the transfer, so make sure RX is configured
1369 	 * before TX.
1370 	 */
1371 	desc_rx = dmaengine_prep_slave_sg(master->dma_rx,
1372 				rx->sgl, rx->nents, DMA_DEV_TO_MEM,
1373 				DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
1374 	if (!desc_rx)
1375 		return -EINVAL;
1376 
1377 	desc_rx->callback = spi_imx_dma_rx_callback;
1378 	desc_rx->callback_param = (void *)spi_imx;
1379 	dmaengine_submit(desc_rx);
1380 	reinit_completion(&spi_imx->dma_rx_completion);
1381 	dma_async_issue_pending(master->dma_rx);
1382 
1383 	desc_tx = dmaengine_prep_slave_sg(master->dma_tx,
1384 				tx->sgl, tx->nents, DMA_MEM_TO_DEV,
1385 				DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
1386 	if (!desc_tx) {
1387 		dmaengine_terminate_all(master->dma_tx);
1388 		return -EINVAL;
1389 	}
1390 
1391 	desc_tx->callback = spi_imx_dma_tx_callback;
1392 	desc_tx->callback_param = (void *)spi_imx;
1393 	dmaengine_submit(desc_tx);
1394 	reinit_completion(&spi_imx->dma_tx_completion);
1395 	dma_async_issue_pending(master->dma_tx);
1396 
1397 	transfer_timeout = spi_imx_calculate_timeout(spi_imx, transfer->len);
1398 
1399 	/* Wait SDMA to finish the data transfer.*/
1400 	timeout = wait_for_completion_timeout(&spi_imx->dma_tx_completion,
1401 						transfer_timeout);
1402 	if (!timeout) {
1403 		dev_err(spi_imx->dev, "I/O Error in DMA TX\n");
1404 		dmaengine_terminate_all(master->dma_tx);
1405 		dmaengine_terminate_all(master->dma_rx);
1406 		return -ETIMEDOUT;
1407 	}
1408 
1409 	timeout = wait_for_completion_timeout(&spi_imx->dma_rx_completion,
1410 					      transfer_timeout);
1411 	if (!timeout) {
1412 		dev_err(&master->dev, "I/O Error in DMA RX\n");
1413 		spi_imx->devtype_data->reset(spi_imx);
1414 		dmaengine_terminate_all(master->dma_rx);
1415 		return -ETIMEDOUT;
1416 	}
1417 
1418 	return transfer->len;
1419 }
1420 
1421 static int spi_imx_pio_transfer(struct spi_device *spi,
1422 				struct spi_transfer *transfer)
1423 {
1424 	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
1425 	unsigned long transfer_timeout;
1426 	unsigned long timeout;
1427 
1428 	spi_imx->tx_buf = transfer->tx_buf;
1429 	spi_imx->rx_buf = transfer->rx_buf;
1430 	spi_imx->count = transfer->len;
1431 	spi_imx->txfifo = 0;
1432 	spi_imx->remainder = 0;
1433 
1434 	reinit_completion(&spi_imx->xfer_done);
1435 
1436 	spi_imx_push(spi_imx);
1437 
1438 	spi_imx->devtype_data->intctrl(spi_imx, MXC_INT_TE);
1439 
1440 	transfer_timeout = spi_imx_calculate_timeout(spi_imx, transfer->len);
1441 
1442 	timeout = wait_for_completion_timeout(&spi_imx->xfer_done,
1443 					      transfer_timeout);
1444 	if (!timeout) {
1445 		dev_err(&spi->dev, "I/O Error in PIO\n");
1446 		spi_imx->devtype_data->reset(spi_imx);
1447 		return -ETIMEDOUT;
1448 	}
1449 
1450 	return transfer->len;
1451 }
1452 
1453 static int spi_imx_pio_transfer_slave(struct spi_device *spi,
1454 				      struct spi_transfer *transfer)
1455 {
1456 	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
1457 	int ret = transfer->len;
1458 
1459 	if (is_imx53_ecspi(spi_imx) &&
1460 	    transfer->len > MX53_MAX_TRANSFER_BYTES) {
1461 		dev_err(&spi->dev, "Transaction too big, max size is %d bytes\n",
1462 			MX53_MAX_TRANSFER_BYTES);
1463 		return -EMSGSIZE;
1464 	}
1465 
1466 	spi_imx->tx_buf = transfer->tx_buf;
1467 	spi_imx->rx_buf = transfer->rx_buf;
1468 	spi_imx->count = transfer->len;
1469 	spi_imx->txfifo = 0;
1470 	spi_imx->remainder = 0;
1471 
1472 	reinit_completion(&spi_imx->xfer_done);
1473 	spi_imx->slave_aborted = false;
1474 
1475 	spi_imx_push(spi_imx);
1476 
1477 	spi_imx->devtype_data->intctrl(spi_imx, MXC_INT_TE | MXC_INT_RDR);
1478 
1479 	if (wait_for_completion_interruptible(&spi_imx->xfer_done) ||
1480 	    spi_imx->slave_aborted) {
1481 		dev_dbg(&spi->dev, "interrupted\n");
1482 		ret = -EINTR;
1483 	}
1484 
1485 	/* ecspi has a HW issue when works in Slave mode,
1486 	 * after 64 words writtern to TXFIFO, even TXFIFO becomes empty,
1487 	 * ECSPI_TXDATA keeps shift out the last word data,
1488 	 * so we have to disable ECSPI when in slave mode after the
1489 	 * transfer completes
1490 	 */
1491 	if (spi_imx->devtype_data->disable)
1492 		spi_imx->devtype_data->disable(spi_imx);
1493 
1494 	return ret;
1495 }
1496 
1497 static int spi_imx_transfer(struct spi_device *spi,
1498 				struct spi_transfer *transfer)
1499 {
1500 	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
1501 
1502 	/* flush rxfifo before transfer */
1503 	while (spi_imx->devtype_data->rx_available(spi_imx))
1504 		readl(spi_imx->base + MXC_CSPIRXDATA);
1505 
1506 	if (spi_imx->slave_mode)
1507 		return spi_imx_pio_transfer_slave(spi, transfer);
1508 
1509 	if (spi_imx->usedma)
1510 		return spi_imx_dma_transfer(spi_imx, transfer);
1511 	else
1512 		return spi_imx_pio_transfer(spi, transfer);
1513 }
1514 
1515 static int spi_imx_setup(struct spi_device *spi)
1516 {
1517 	dev_dbg(&spi->dev, "%s: mode %d, %u bpw, %d hz\n", __func__,
1518 		 spi->mode, spi->bits_per_word, spi->max_speed_hz);
1519 
1520 	if (spi->mode & SPI_NO_CS)
1521 		return 0;
1522 
1523 	if (gpio_is_valid(spi->cs_gpio))
1524 		gpio_direction_output(spi->cs_gpio,
1525 				      spi->mode & SPI_CS_HIGH ? 0 : 1);
1526 
1527 	spi_imx_chipselect(spi, BITBANG_CS_INACTIVE);
1528 
1529 	return 0;
1530 }
1531 
1532 static void spi_imx_cleanup(struct spi_device *spi)
1533 {
1534 }
1535 
1536 static int
1537 spi_imx_prepare_message(struct spi_master *master, struct spi_message *msg)
1538 {
1539 	struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
1540 	int ret;
1541 
1542 	ret = clk_enable(spi_imx->clk_per);
1543 	if (ret)
1544 		return ret;
1545 
1546 	ret = clk_enable(spi_imx->clk_ipg);
1547 	if (ret) {
1548 		clk_disable(spi_imx->clk_per);
1549 		return ret;
1550 	}
1551 
1552 	ret = spi_imx->devtype_data->prepare_message(spi_imx, msg);
1553 	if (ret) {
1554 		clk_disable(spi_imx->clk_ipg);
1555 		clk_disable(spi_imx->clk_per);
1556 	}
1557 
1558 	return ret;
1559 }
1560 
1561 static int
1562 spi_imx_unprepare_message(struct spi_master *master, struct spi_message *msg)
1563 {
1564 	struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
1565 
1566 	clk_disable(spi_imx->clk_ipg);
1567 	clk_disable(spi_imx->clk_per);
1568 	return 0;
1569 }
1570 
1571 static int spi_imx_slave_abort(struct spi_master *master)
1572 {
1573 	struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
1574 
1575 	spi_imx->slave_aborted = true;
1576 	complete(&spi_imx->xfer_done);
1577 
1578 	return 0;
1579 }
1580 
1581 static int spi_imx_probe(struct platform_device *pdev)
1582 {
1583 	struct device_node *np = pdev->dev.of_node;
1584 	const struct of_device_id *of_id =
1585 			of_match_device(spi_imx_dt_ids, &pdev->dev);
1586 	struct spi_imx_master *mxc_platform_info =
1587 			dev_get_platdata(&pdev->dev);
1588 	struct spi_master *master;
1589 	struct spi_imx_data *spi_imx;
1590 	struct resource *res;
1591 	int i, ret, irq, spi_drctl;
1592 	const struct spi_imx_devtype_data *devtype_data = of_id ? of_id->data :
1593 		(struct spi_imx_devtype_data *)pdev->id_entry->driver_data;
1594 	bool slave_mode;
1595 
1596 	if (!np && !mxc_platform_info) {
1597 		dev_err(&pdev->dev, "can't get the platform data\n");
1598 		return -EINVAL;
1599 	}
1600 
1601 	slave_mode = devtype_data->has_slavemode &&
1602 			of_property_read_bool(np, "spi-slave");
1603 	if (slave_mode)
1604 		master = spi_alloc_slave(&pdev->dev,
1605 					 sizeof(struct spi_imx_data));
1606 	else
1607 		master = spi_alloc_master(&pdev->dev,
1608 					  sizeof(struct spi_imx_data));
1609 	if (!master)
1610 		return -ENOMEM;
1611 
1612 	ret = of_property_read_u32(np, "fsl,spi-rdy-drctl", &spi_drctl);
1613 	if ((ret < 0) || (spi_drctl >= 0x3)) {
1614 		/* '11' is reserved */
1615 		spi_drctl = 0;
1616 	}
1617 
1618 	platform_set_drvdata(pdev, master);
1619 
1620 	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
1621 	master->bus_num = np ? -1 : pdev->id;
1622 
1623 	spi_imx = spi_master_get_devdata(master);
1624 	spi_imx->bitbang.master = master;
1625 	spi_imx->dev = &pdev->dev;
1626 	spi_imx->slave_mode = slave_mode;
1627 
1628 	spi_imx->devtype_data = devtype_data;
1629 
1630 	/* Get number of chip selects, either platform data or OF */
1631 	if (mxc_platform_info) {
1632 		master->num_chipselect = mxc_platform_info->num_chipselect;
1633 		if (mxc_platform_info->chipselect) {
1634 			master->cs_gpios = devm_kcalloc(&master->dev,
1635 				master->num_chipselect, sizeof(int),
1636 				GFP_KERNEL);
1637 			if (!master->cs_gpios)
1638 				return -ENOMEM;
1639 
1640 			for (i = 0; i < master->num_chipselect; i++)
1641 				master->cs_gpios[i] = mxc_platform_info->chipselect[i];
1642 		}
1643 	} else {
1644 		u32 num_cs;
1645 
1646 		if (!of_property_read_u32(np, "num-cs", &num_cs))
1647 			master->num_chipselect = num_cs;
1648 		/* If not preset, default value of 1 is used */
1649 	}
1650 
1651 	spi_imx->bitbang.chipselect = spi_imx_chipselect;
1652 	spi_imx->bitbang.setup_transfer = spi_imx_setupxfer;
1653 	spi_imx->bitbang.txrx_bufs = spi_imx_transfer;
1654 	spi_imx->bitbang.master->setup = spi_imx_setup;
1655 	spi_imx->bitbang.master->cleanup = spi_imx_cleanup;
1656 	spi_imx->bitbang.master->prepare_message = spi_imx_prepare_message;
1657 	spi_imx->bitbang.master->unprepare_message = spi_imx_unprepare_message;
1658 	spi_imx->bitbang.master->slave_abort = spi_imx_slave_abort;
1659 	spi_imx->bitbang.master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \
1660 					     | SPI_NO_CS;
1661 	if (is_imx35_cspi(spi_imx) || is_imx51_ecspi(spi_imx) ||
1662 	    is_imx53_ecspi(spi_imx))
1663 		spi_imx->bitbang.master->mode_bits |= SPI_LOOP | SPI_READY;
1664 
1665 	spi_imx->spi_drctl = spi_drctl;
1666 
1667 	init_completion(&spi_imx->xfer_done);
1668 
1669 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1670 	spi_imx->base = devm_ioremap_resource(&pdev->dev, res);
1671 	if (IS_ERR(spi_imx->base)) {
1672 		ret = PTR_ERR(spi_imx->base);
1673 		goto out_master_put;
1674 	}
1675 	spi_imx->base_phys = res->start;
1676 
1677 	irq = platform_get_irq(pdev, 0);
1678 	if (irq < 0) {
1679 		ret = irq;
1680 		goto out_master_put;
1681 	}
1682 
1683 	ret = devm_request_irq(&pdev->dev, irq, spi_imx_isr, 0,
1684 			       dev_name(&pdev->dev), spi_imx);
1685 	if (ret) {
1686 		dev_err(&pdev->dev, "can't get irq%d: %d\n", irq, ret);
1687 		goto out_master_put;
1688 	}
1689 
1690 	spi_imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
1691 	if (IS_ERR(spi_imx->clk_ipg)) {
1692 		ret = PTR_ERR(spi_imx->clk_ipg);
1693 		goto out_master_put;
1694 	}
1695 
1696 	spi_imx->clk_per = devm_clk_get(&pdev->dev, "per");
1697 	if (IS_ERR(spi_imx->clk_per)) {
1698 		ret = PTR_ERR(spi_imx->clk_per);
1699 		goto out_master_put;
1700 	}
1701 
1702 	ret = clk_prepare_enable(spi_imx->clk_per);
1703 	if (ret)
1704 		goto out_master_put;
1705 
1706 	ret = clk_prepare_enable(spi_imx->clk_ipg);
1707 	if (ret)
1708 		goto out_put_per;
1709 
1710 	spi_imx->spi_clk = clk_get_rate(spi_imx->clk_per);
1711 	/*
1712 	 * Only validated on i.mx35 and i.mx6 now, can remove the constraint
1713 	 * if validated on other chips.
1714 	 */
1715 	if (spi_imx->devtype_data->has_dmamode) {
1716 		ret = spi_imx_sdma_init(&pdev->dev, spi_imx, master);
1717 		if (ret == -EPROBE_DEFER)
1718 			goto out_clk_put;
1719 
1720 		if (ret < 0)
1721 			dev_err(&pdev->dev, "dma setup error %d, use pio\n",
1722 				ret);
1723 	}
1724 
1725 	spi_imx->devtype_data->reset(spi_imx);
1726 
1727 	spi_imx->devtype_data->intctrl(spi_imx, 0);
1728 
1729 	master->dev.of_node = pdev->dev.of_node;
1730 	ret = spi_bitbang_start(&spi_imx->bitbang);
1731 	if (ret) {
1732 		dev_err(&pdev->dev, "bitbang start failed with %d\n", ret);
1733 		goto out_clk_put;
1734 	}
1735 
1736 	/* Request GPIO CS lines, if any */
1737 	if (!spi_imx->slave_mode && master->cs_gpios) {
1738 		for (i = 0; i < master->num_chipselect; i++) {
1739 			if (!gpio_is_valid(master->cs_gpios[i]))
1740 				continue;
1741 
1742 			ret = devm_gpio_request(&pdev->dev,
1743 						master->cs_gpios[i],
1744 						DRIVER_NAME);
1745 			if (ret) {
1746 				dev_err(&pdev->dev, "Can't get CS GPIO %i\n",
1747 					master->cs_gpios[i]);
1748 				goto out_spi_bitbang;
1749 			}
1750 		}
1751 	}
1752 
1753 	dev_info(&pdev->dev, "probed\n");
1754 
1755 	clk_disable(spi_imx->clk_ipg);
1756 	clk_disable(spi_imx->clk_per);
1757 	return ret;
1758 
1759 out_spi_bitbang:
1760 	spi_bitbang_stop(&spi_imx->bitbang);
1761 out_clk_put:
1762 	clk_disable_unprepare(spi_imx->clk_ipg);
1763 out_put_per:
1764 	clk_disable_unprepare(spi_imx->clk_per);
1765 out_master_put:
1766 	spi_master_put(master);
1767 
1768 	return ret;
1769 }
1770 
1771 static int spi_imx_remove(struct platform_device *pdev)
1772 {
1773 	struct spi_master *master = platform_get_drvdata(pdev);
1774 	struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
1775 	int ret;
1776 
1777 	spi_bitbang_stop(&spi_imx->bitbang);
1778 
1779 	ret = clk_enable(spi_imx->clk_per);
1780 	if (ret)
1781 		return ret;
1782 
1783 	ret = clk_enable(spi_imx->clk_ipg);
1784 	if (ret) {
1785 		clk_disable(spi_imx->clk_per);
1786 		return ret;
1787 	}
1788 
1789 	writel(0, spi_imx->base + MXC_CSPICTRL);
1790 	clk_disable_unprepare(spi_imx->clk_ipg);
1791 	clk_disable_unprepare(spi_imx->clk_per);
1792 	spi_imx_sdma_exit(spi_imx);
1793 	spi_master_put(master);
1794 
1795 	return 0;
1796 }
1797 
1798 static struct platform_driver spi_imx_driver = {
1799 	.driver = {
1800 		   .name = DRIVER_NAME,
1801 		   .of_match_table = spi_imx_dt_ids,
1802 		   },
1803 	.id_table = spi_imx_devtype,
1804 	.probe = spi_imx_probe,
1805 	.remove = spi_imx_remove,
1806 };
1807 module_platform_driver(spi_imx_driver);
1808 
1809 MODULE_DESCRIPTION("SPI Controller driver");
1810 MODULE_AUTHOR("Sascha Hauer, Pengutronix");
1811 MODULE_LICENSE("GPL");
1812 MODULE_ALIAS("platform:" DRIVER_NAME);
1813