1 // SPDX-License-Identifier: GPL-2.0+ 2 // 3 // Copyright 2013 Freescale Semiconductor, Inc. 4 // Copyright 2020 NXP 5 // 6 // Freescale DSPI driver 7 // This file contains a driver for the Freescale DSPI 8 9 #include <linux/clk.h> 10 #include <linux/delay.h> 11 #include <linux/dmaengine.h> 12 #include <linux/dma-mapping.h> 13 #include <linux/interrupt.h> 14 #include <linux/kernel.h> 15 #include <linux/module.h> 16 #include <linux/of.h> 17 #include <linux/platform_device.h> 18 #include <linux/pinctrl/consumer.h> 19 #include <linux/regmap.h> 20 #include <linux/spi/spi.h> 21 #include <linux/spi/spi-fsl-dspi.h> 22 23 #define DRIVER_NAME "fsl-dspi" 24 25 #define SPI_MCR 0x00 26 #define SPI_MCR_HOST BIT(31) 27 #define SPI_MCR_PCSIS(x) ((x) << 16) 28 #define SPI_MCR_CLR_TXF BIT(11) 29 #define SPI_MCR_CLR_RXF BIT(10) 30 #define SPI_MCR_XSPI BIT(3) 31 #define SPI_MCR_DIS_TXF BIT(13) 32 #define SPI_MCR_DIS_RXF BIT(12) 33 #define SPI_MCR_HALT BIT(0) 34 35 #define SPI_TCR 0x08 36 #define SPI_TCR_GET_TCNT(x) (((x) & GENMASK(31, 16)) >> 16) 37 38 #define SPI_CTAR(x) (0x0c + (((x) & GENMASK(1, 0)) * 4)) 39 #define SPI_CTAR_FMSZ(x) (((x) << 27) & GENMASK(30, 27)) 40 #define SPI_CTAR_CPOL BIT(26) 41 #define SPI_CTAR_CPHA BIT(25) 42 #define SPI_CTAR_LSBFE BIT(24) 43 #define SPI_CTAR_PCSSCK(x) (((x) << 22) & GENMASK(23, 22)) 44 #define SPI_CTAR_PASC(x) (((x) << 20) & GENMASK(21, 20)) 45 #define SPI_CTAR_PDT(x) (((x) << 18) & GENMASK(19, 18)) 46 #define SPI_CTAR_PBR(x) (((x) << 16) & GENMASK(17, 16)) 47 #define SPI_CTAR_CSSCK(x) (((x) << 12) & GENMASK(15, 12)) 48 #define SPI_CTAR_ASC(x) (((x) << 8) & GENMASK(11, 8)) 49 #define SPI_CTAR_DT(x) (((x) << 4) & GENMASK(7, 4)) 50 #define SPI_CTAR_BR(x) ((x) & GENMASK(3, 0)) 51 #define SPI_CTAR_SCALE_BITS 0xf 52 53 #define SPI_CTAR0_SLAVE 0x0c 54 55 #define SPI_SR 0x2c 56 #define SPI_SR_TCFQF BIT(31) 57 #define SPI_SR_TFUF BIT(27) 58 #define SPI_SR_TFFF BIT(25) 59 #define SPI_SR_CMDTCF BIT(23) 60 #define SPI_SR_SPEF BIT(21) 61 #define SPI_SR_RFOF BIT(19) 62 #define SPI_SR_TFIWF BIT(18) 63 #define SPI_SR_RFDF BIT(17) 64 #define SPI_SR_CMDFFF BIT(16) 65 #define SPI_SR_CLEAR (SPI_SR_TCFQF | \ 66 SPI_SR_TFUF | SPI_SR_TFFF | \ 67 SPI_SR_CMDTCF | SPI_SR_SPEF | \ 68 SPI_SR_RFOF | SPI_SR_TFIWF | \ 69 SPI_SR_RFDF | SPI_SR_CMDFFF) 70 71 #define SPI_RSER_TFFFE BIT(25) 72 #define SPI_RSER_TFFFD BIT(24) 73 #define SPI_RSER_RFDFE BIT(17) 74 #define SPI_RSER_RFDFD BIT(16) 75 76 #define SPI_RSER 0x30 77 #define SPI_RSER_TCFQE BIT(31) 78 #define SPI_RSER_CMDTCFE BIT(23) 79 80 #define SPI_PUSHR 0x34 81 #define SPI_PUSHR_CMD_CONT BIT(15) 82 #define SPI_PUSHR_CMD_CTAS(x) (((x) << 12 & GENMASK(14, 12))) 83 #define SPI_PUSHR_CMD_EOQ BIT(11) 84 #define SPI_PUSHR_CMD_CTCNT BIT(10) 85 #define SPI_PUSHR_CMD_PCS(x) (BIT(x) & GENMASK(5, 0)) 86 87 #define SPI_PUSHR_SLAVE 0x34 88 89 #define SPI_POPR 0x38 90 91 #define SPI_TXFR0 0x3c 92 #define SPI_TXFR1 0x40 93 #define SPI_TXFR2 0x44 94 #define SPI_TXFR3 0x48 95 #define SPI_RXFR0 0x7c 96 #define SPI_RXFR1 0x80 97 #define SPI_RXFR2 0x84 98 #define SPI_RXFR3 0x88 99 100 #define SPI_CTARE(x) (0x11c + (((x) & GENMASK(1, 0)) * 4)) 101 #define SPI_CTARE_FMSZE(x) (((x) & 0x1) << 16) 102 #define SPI_CTARE_DTCP(x) ((x) & 0x7ff) 103 104 #define SPI_SREX 0x13c 105 106 #define SPI_FRAME_BITS(bits) SPI_CTAR_FMSZ((bits) - 1) 107 #define SPI_FRAME_EBITS(bits) SPI_CTARE_FMSZE(((bits) - 1) >> 4) 108 109 #define DMA_COMPLETION_TIMEOUT msecs_to_jiffies(3000) 110 111 struct chip_data { 112 u32 ctar_val; 113 }; 114 115 enum dspi_trans_mode { 116 DSPI_XSPI_MODE, 117 DSPI_DMA_MODE, 118 }; 119 120 struct fsl_dspi_devtype_data { 121 enum dspi_trans_mode trans_mode; 122 u8 max_clock_factor; 123 int fifo_size; 124 }; 125 126 enum { 127 LS1021A, 128 LS1012A, 129 LS1028A, 130 LS1043A, 131 LS1046A, 132 LS2080A, 133 LS2085A, 134 LX2160A, 135 MCF5441X, 136 VF610, 137 }; 138 139 static const struct fsl_dspi_devtype_data devtype_data[] = { 140 [VF610] = { 141 .trans_mode = DSPI_DMA_MODE, 142 .max_clock_factor = 2, 143 .fifo_size = 4, 144 }, 145 [LS1021A] = { 146 /* Has A-011218 DMA erratum */ 147 .trans_mode = DSPI_XSPI_MODE, 148 .max_clock_factor = 8, 149 .fifo_size = 4, 150 }, 151 [LS1012A] = { 152 /* Has A-011218 DMA erratum */ 153 .trans_mode = DSPI_XSPI_MODE, 154 .max_clock_factor = 8, 155 .fifo_size = 16, 156 }, 157 [LS1028A] = { 158 .trans_mode = DSPI_XSPI_MODE, 159 .max_clock_factor = 8, 160 .fifo_size = 4, 161 }, 162 [LS1043A] = { 163 /* Has A-011218 DMA erratum */ 164 .trans_mode = DSPI_XSPI_MODE, 165 .max_clock_factor = 8, 166 .fifo_size = 16, 167 }, 168 [LS1046A] = { 169 /* Has A-011218 DMA erratum */ 170 .trans_mode = DSPI_XSPI_MODE, 171 .max_clock_factor = 8, 172 .fifo_size = 16, 173 }, 174 [LS2080A] = { 175 .trans_mode = DSPI_XSPI_MODE, 176 .max_clock_factor = 8, 177 .fifo_size = 4, 178 }, 179 [LS2085A] = { 180 .trans_mode = DSPI_XSPI_MODE, 181 .max_clock_factor = 8, 182 .fifo_size = 4, 183 }, 184 [LX2160A] = { 185 .trans_mode = DSPI_XSPI_MODE, 186 .max_clock_factor = 8, 187 .fifo_size = 4, 188 }, 189 [MCF5441X] = { 190 .trans_mode = DSPI_DMA_MODE, 191 .max_clock_factor = 8, 192 .fifo_size = 16, 193 }, 194 }; 195 196 struct fsl_dspi_dma { 197 u32 *tx_dma_buf; 198 struct dma_chan *chan_tx; 199 dma_addr_t tx_dma_phys; 200 struct completion cmd_tx_complete; 201 struct dma_async_tx_descriptor *tx_desc; 202 203 u32 *rx_dma_buf; 204 struct dma_chan *chan_rx; 205 dma_addr_t rx_dma_phys; 206 struct completion cmd_rx_complete; 207 struct dma_async_tx_descriptor *rx_desc; 208 }; 209 210 struct fsl_dspi { 211 struct spi_controller *ctlr; 212 struct platform_device *pdev; 213 214 struct regmap *regmap; 215 struct regmap *regmap_pushr; 216 int irq; 217 struct clk *clk; 218 219 struct spi_transfer *cur_transfer; 220 struct spi_message *cur_msg; 221 struct chip_data *cur_chip; 222 size_t progress; 223 size_t len; 224 const void *tx; 225 void *rx; 226 u16 tx_cmd; 227 const struct fsl_dspi_devtype_data *devtype_data; 228 229 struct completion xfer_done; 230 231 struct fsl_dspi_dma *dma; 232 233 int oper_word_size; 234 int oper_bits_per_word; 235 236 int words_in_flight; 237 238 /* 239 * Offsets for CMD and TXDATA within SPI_PUSHR when accessed 240 * individually (in XSPI mode) 241 */ 242 int pushr_cmd; 243 int pushr_tx; 244 245 void (*host_to_dev)(struct fsl_dspi *dspi, u32 *txdata); 246 void (*dev_to_host)(struct fsl_dspi *dspi, u32 rxdata); 247 }; 248 249 static void dspi_native_host_to_dev(struct fsl_dspi *dspi, u32 *txdata) 250 { 251 switch (dspi->oper_word_size) { 252 case 1: 253 *txdata = *(u8 *)dspi->tx; 254 break; 255 case 2: 256 *txdata = *(u16 *)dspi->tx; 257 break; 258 case 4: 259 *txdata = *(u32 *)dspi->tx; 260 break; 261 } 262 dspi->tx += dspi->oper_word_size; 263 } 264 265 static void dspi_native_dev_to_host(struct fsl_dspi *dspi, u32 rxdata) 266 { 267 switch (dspi->oper_word_size) { 268 case 1: 269 *(u8 *)dspi->rx = rxdata; 270 break; 271 case 2: 272 *(u16 *)dspi->rx = rxdata; 273 break; 274 case 4: 275 *(u32 *)dspi->rx = rxdata; 276 break; 277 } 278 dspi->rx += dspi->oper_word_size; 279 } 280 281 static void dspi_8on32_host_to_dev(struct fsl_dspi *dspi, u32 *txdata) 282 { 283 *txdata = cpu_to_be32(*(u32 *)dspi->tx); 284 dspi->tx += sizeof(u32); 285 } 286 287 static void dspi_8on32_dev_to_host(struct fsl_dspi *dspi, u32 rxdata) 288 { 289 *(u32 *)dspi->rx = be32_to_cpu(rxdata); 290 dspi->rx += sizeof(u32); 291 } 292 293 static void dspi_8on16_host_to_dev(struct fsl_dspi *dspi, u32 *txdata) 294 { 295 *txdata = cpu_to_be16(*(u16 *)dspi->tx); 296 dspi->tx += sizeof(u16); 297 } 298 299 static void dspi_8on16_dev_to_host(struct fsl_dspi *dspi, u32 rxdata) 300 { 301 *(u16 *)dspi->rx = be16_to_cpu(rxdata); 302 dspi->rx += sizeof(u16); 303 } 304 305 static void dspi_16on32_host_to_dev(struct fsl_dspi *dspi, u32 *txdata) 306 { 307 u16 hi = *(u16 *)dspi->tx; 308 u16 lo = *(u16 *)(dspi->tx + 2); 309 310 *txdata = (u32)hi << 16 | lo; 311 dspi->tx += sizeof(u32); 312 } 313 314 static void dspi_16on32_dev_to_host(struct fsl_dspi *dspi, u32 rxdata) 315 { 316 u16 hi = rxdata & 0xffff; 317 u16 lo = rxdata >> 16; 318 319 *(u16 *)dspi->rx = lo; 320 *(u16 *)(dspi->rx + 2) = hi; 321 dspi->rx += sizeof(u32); 322 } 323 324 /* 325 * Pop one word from the TX buffer for pushing into the 326 * PUSHR register (TX FIFO) 327 */ 328 static u32 dspi_pop_tx(struct fsl_dspi *dspi) 329 { 330 u32 txdata = 0; 331 332 if (dspi->tx) 333 dspi->host_to_dev(dspi, &txdata); 334 dspi->len -= dspi->oper_word_size; 335 return txdata; 336 } 337 338 /* Prepare one TX FIFO entry (txdata plus cmd) */ 339 static u32 dspi_pop_tx_pushr(struct fsl_dspi *dspi) 340 { 341 u16 cmd = dspi->tx_cmd, data = dspi_pop_tx(dspi); 342 343 if (spi_controller_is_target(dspi->ctlr)) 344 return data; 345 346 if (dspi->len > 0) 347 cmd |= SPI_PUSHR_CMD_CONT; 348 return cmd << 16 | data; 349 } 350 351 /* Push one word to the RX buffer from the POPR register (RX FIFO) */ 352 static void dspi_push_rx(struct fsl_dspi *dspi, u32 rxdata) 353 { 354 if (!dspi->rx) 355 return; 356 dspi->dev_to_host(dspi, rxdata); 357 } 358 359 static void dspi_tx_dma_callback(void *arg) 360 { 361 struct fsl_dspi *dspi = arg; 362 struct fsl_dspi_dma *dma = dspi->dma; 363 364 complete(&dma->cmd_tx_complete); 365 } 366 367 static void dspi_rx_dma_callback(void *arg) 368 { 369 struct fsl_dspi *dspi = arg; 370 struct fsl_dspi_dma *dma = dspi->dma; 371 int i; 372 373 if (dspi->rx) { 374 for (i = 0; i < dspi->words_in_flight; i++) 375 dspi_push_rx(dspi, dspi->dma->rx_dma_buf[i]); 376 } 377 378 complete(&dma->cmd_rx_complete); 379 } 380 381 static int dspi_next_xfer_dma_submit(struct fsl_dspi *dspi) 382 { 383 struct device *dev = &dspi->pdev->dev; 384 struct fsl_dspi_dma *dma = dspi->dma; 385 int time_left; 386 int i; 387 388 for (i = 0; i < dspi->words_in_flight; i++) 389 dspi->dma->tx_dma_buf[i] = dspi_pop_tx_pushr(dspi); 390 391 dma->tx_desc = dmaengine_prep_slave_single(dma->chan_tx, 392 dma->tx_dma_phys, 393 dspi->words_in_flight * 394 DMA_SLAVE_BUSWIDTH_4_BYTES, 395 DMA_MEM_TO_DEV, 396 DMA_PREP_INTERRUPT | DMA_CTRL_ACK); 397 if (!dma->tx_desc) { 398 dev_err(dev, "Not able to get desc for DMA xfer\n"); 399 return -EIO; 400 } 401 402 dma->tx_desc->callback = dspi_tx_dma_callback; 403 dma->tx_desc->callback_param = dspi; 404 if (dma_submit_error(dmaengine_submit(dma->tx_desc))) { 405 dev_err(dev, "DMA submit failed\n"); 406 return -EINVAL; 407 } 408 409 dma->rx_desc = dmaengine_prep_slave_single(dma->chan_rx, 410 dma->rx_dma_phys, 411 dspi->words_in_flight * 412 DMA_SLAVE_BUSWIDTH_4_BYTES, 413 DMA_DEV_TO_MEM, 414 DMA_PREP_INTERRUPT | DMA_CTRL_ACK); 415 if (!dma->rx_desc) { 416 dev_err(dev, "Not able to get desc for DMA xfer\n"); 417 return -EIO; 418 } 419 420 dma->rx_desc->callback = dspi_rx_dma_callback; 421 dma->rx_desc->callback_param = dspi; 422 if (dma_submit_error(dmaengine_submit(dma->rx_desc))) { 423 dev_err(dev, "DMA submit failed\n"); 424 return -EINVAL; 425 } 426 427 reinit_completion(&dspi->dma->cmd_rx_complete); 428 reinit_completion(&dspi->dma->cmd_tx_complete); 429 430 dma_async_issue_pending(dma->chan_rx); 431 dma_async_issue_pending(dma->chan_tx); 432 433 if (spi_controller_is_target(dspi->ctlr)) { 434 wait_for_completion_interruptible(&dspi->dma->cmd_rx_complete); 435 return 0; 436 } 437 438 time_left = wait_for_completion_timeout(&dspi->dma->cmd_tx_complete, 439 DMA_COMPLETION_TIMEOUT); 440 if (time_left == 0) { 441 dev_err(dev, "DMA tx timeout\n"); 442 dmaengine_terminate_all(dma->chan_tx); 443 dmaengine_terminate_all(dma->chan_rx); 444 return -ETIMEDOUT; 445 } 446 447 time_left = wait_for_completion_timeout(&dspi->dma->cmd_rx_complete, 448 DMA_COMPLETION_TIMEOUT); 449 if (time_left == 0) { 450 dev_err(dev, "DMA rx timeout\n"); 451 dmaengine_terminate_all(dma->chan_tx); 452 dmaengine_terminate_all(dma->chan_rx); 453 return -ETIMEDOUT; 454 } 455 456 return 0; 457 } 458 459 static void dspi_setup_accel(struct fsl_dspi *dspi); 460 461 static int dspi_dma_xfer(struct fsl_dspi *dspi) 462 { 463 struct spi_message *message = dspi->cur_msg; 464 struct device *dev = &dspi->pdev->dev; 465 int ret = 0; 466 467 /* 468 * dspi->len gets decremented by dspi_pop_tx_pushr in 469 * dspi_next_xfer_dma_submit 470 */ 471 while (dspi->len) { 472 /* Figure out operational bits-per-word for this chunk */ 473 dspi_setup_accel(dspi); 474 475 dspi->words_in_flight = dspi->len / dspi->oper_word_size; 476 if (dspi->words_in_flight > dspi->devtype_data->fifo_size) 477 dspi->words_in_flight = dspi->devtype_data->fifo_size; 478 479 message->actual_length += dspi->words_in_flight * 480 dspi->oper_word_size; 481 482 ret = dspi_next_xfer_dma_submit(dspi); 483 if (ret) { 484 dev_err(dev, "DMA transfer failed\n"); 485 break; 486 } 487 } 488 489 return ret; 490 } 491 492 static int dspi_request_dma(struct fsl_dspi *dspi, phys_addr_t phy_addr) 493 { 494 int dma_bufsize = dspi->devtype_data->fifo_size * 2; 495 struct device *dev = &dspi->pdev->dev; 496 struct dma_slave_config cfg; 497 struct fsl_dspi_dma *dma; 498 int ret; 499 500 dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL); 501 if (!dma) 502 return -ENOMEM; 503 504 dma->chan_rx = dma_request_chan(dev, "rx"); 505 if (IS_ERR(dma->chan_rx)) { 506 return dev_err_probe(dev, PTR_ERR(dma->chan_rx), 507 "rx dma channel not available\n"); 508 } 509 510 dma->chan_tx = dma_request_chan(dev, "tx"); 511 if (IS_ERR(dma->chan_tx)) { 512 ret = PTR_ERR(dma->chan_tx); 513 dev_err_probe(dev, ret, "tx dma channel not available\n"); 514 goto err_tx_channel; 515 } 516 517 dma->tx_dma_buf = dma_alloc_coherent(dma->chan_tx->device->dev, 518 dma_bufsize, &dma->tx_dma_phys, 519 GFP_KERNEL); 520 if (!dma->tx_dma_buf) { 521 ret = -ENOMEM; 522 goto err_tx_dma_buf; 523 } 524 525 dma->rx_dma_buf = dma_alloc_coherent(dma->chan_rx->device->dev, 526 dma_bufsize, &dma->rx_dma_phys, 527 GFP_KERNEL); 528 if (!dma->rx_dma_buf) { 529 ret = -ENOMEM; 530 goto err_rx_dma_buf; 531 } 532 533 memset(&cfg, 0, sizeof(cfg)); 534 cfg.src_addr = phy_addr + SPI_POPR; 535 cfg.dst_addr = phy_addr + SPI_PUSHR; 536 cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; 537 cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; 538 cfg.src_maxburst = 1; 539 cfg.dst_maxburst = 1; 540 541 cfg.direction = DMA_DEV_TO_MEM; 542 ret = dmaengine_slave_config(dma->chan_rx, &cfg); 543 if (ret) { 544 dev_err(dev, "can't configure rx dma channel\n"); 545 ret = -EINVAL; 546 goto err_slave_config; 547 } 548 549 cfg.direction = DMA_MEM_TO_DEV; 550 ret = dmaengine_slave_config(dma->chan_tx, &cfg); 551 if (ret) { 552 dev_err(dev, "can't configure tx dma channel\n"); 553 ret = -EINVAL; 554 goto err_slave_config; 555 } 556 557 dspi->dma = dma; 558 init_completion(&dma->cmd_tx_complete); 559 init_completion(&dma->cmd_rx_complete); 560 561 return 0; 562 563 err_slave_config: 564 dma_free_coherent(dma->chan_rx->device->dev, 565 dma_bufsize, dma->rx_dma_buf, dma->rx_dma_phys); 566 err_rx_dma_buf: 567 dma_free_coherent(dma->chan_tx->device->dev, 568 dma_bufsize, dma->tx_dma_buf, dma->tx_dma_phys); 569 err_tx_dma_buf: 570 dma_release_channel(dma->chan_tx); 571 err_tx_channel: 572 dma_release_channel(dma->chan_rx); 573 574 devm_kfree(dev, dma); 575 dspi->dma = NULL; 576 577 return ret; 578 } 579 580 static void dspi_release_dma(struct fsl_dspi *dspi) 581 { 582 int dma_bufsize = dspi->devtype_data->fifo_size * 2; 583 struct fsl_dspi_dma *dma = dspi->dma; 584 585 if (!dma) 586 return; 587 588 if (dma->chan_tx) { 589 dma_free_coherent(dma->chan_tx->device->dev, dma_bufsize, 590 dma->tx_dma_buf, dma->tx_dma_phys); 591 dma_release_channel(dma->chan_tx); 592 } 593 594 if (dma->chan_rx) { 595 dma_free_coherent(dma->chan_rx->device->dev, dma_bufsize, 596 dma->rx_dma_buf, dma->rx_dma_phys); 597 dma_release_channel(dma->chan_rx); 598 } 599 } 600 601 static void hz_to_spi_baud(char *pbr, char *br, int speed_hz, 602 unsigned long clkrate) 603 { 604 /* Valid baud rate pre-scaler values */ 605 int pbr_tbl[4] = {2, 3, 5, 7}; 606 int brs[16] = { 2, 4, 6, 8, 607 16, 32, 64, 128, 608 256, 512, 1024, 2048, 609 4096, 8192, 16384, 32768 }; 610 int scale_needed, scale, minscale = INT_MAX; 611 int i, j; 612 613 scale_needed = clkrate / speed_hz; 614 if (clkrate % speed_hz) 615 scale_needed++; 616 617 for (i = 0; i < ARRAY_SIZE(brs); i++) 618 for (j = 0; j < ARRAY_SIZE(pbr_tbl); j++) { 619 scale = brs[i] * pbr_tbl[j]; 620 if (scale >= scale_needed) { 621 if (scale < minscale) { 622 minscale = scale; 623 *br = i; 624 *pbr = j; 625 } 626 break; 627 } 628 } 629 630 if (minscale == INT_MAX) { 631 pr_warn("Can not find valid baud rate,speed_hz is %d,clkrate is %ld, we use the max prescaler value.\n", 632 speed_hz, clkrate); 633 *pbr = ARRAY_SIZE(pbr_tbl) - 1; 634 *br = ARRAY_SIZE(brs) - 1; 635 } 636 } 637 638 static void ns_delay_scale(char *psc, char *sc, int delay_ns, 639 unsigned long clkrate) 640 { 641 int scale_needed, scale, minscale = INT_MAX; 642 int pscale_tbl[4] = {1, 3, 5, 7}; 643 u32 remainder; 644 int i, j; 645 646 scale_needed = div_u64_rem((u64)delay_ns * clkrate, NSEC_PER_SEC, 647 &remainder); 648 if (remainder) 649 scale_needed++; 650 651 for (i = 0; i < ARRAY_SIZE(pscale_tbl); i++) 652 for (j = 0; j <= SPI_CTAR_SCALE_BITS; j++) { 653 scale = pscale_tbl[i] * (2 << j); 654 if (scale >= scale_needed) { 655 if (scale < minscale) { 656 minscale = scale; 657 *psc = i; 658 *sc = j; 659 } 660 break; 661 } 662 } 663 664 if (minscale == INT_MAX) { 665 pr_warn("Cannot find correct scale values for %dns delay at clkrate %ld, using max prescaler value", 666 delay_ns, clkrate); 667 *psc = ARRAY_SIZE(pscale_tbl) - 1; 668 *sc = SPI_CTAR_SCALE_BITS; 669 } 670 } 671 672 static void dspi_pushr_cmd_write(struct fsl_dspi *dspi, u16 cmd) 673 { 674 /* 675 * The only time when the PCS doesn't need continuation after this word 676 * is when it's last. We need to look ahead, because we actually call 677 * dspi_pop_tx (the function that decrements dspi->len) _after_ 678 * dspi_pushr_cmd_write with XSPI mode. As for how much in advance? One 679 * word is enough. If there's more to transmit than that, 680 * dspi_xspi_write will know to split the FIFO writes in 2, and 681 * generate a new PUSHR command with the final word that will have PCS 682 * deasserted (not continued) here. 683 */ 684 if (dspi->len > dspi->oper_word_size) 685 cmd |= SPI_PUSHR_CMD_CONT; 686 regmap_write(dspi->regmap_pushr, dspi->pushr_cmd, cmd); 687 } 688 689 static void dspi_pushr_txdata_write(struct fsl_dspi *dspi, u16 txdata) 690 { 691 regmap_write(dspi->regmap_pushr, dspi->pushr_tx, txdata); 692 } 693 694 static void dspi_xspi_fifo_write(struct fsl_dspi *dspi, int num_words) 695 { 696 int num_bytes = num_words * dspi->oper_word_size; 697 u16 tx_cmd = dspi->tx_cmd; 698 699 /* 700 * If the PCS needs to de-assert (i.e. we're at the end of the buffer 701 * and cs_change does not want the PCS to stay on), then we need a new 702 * PUSHR command, since this one (for the body of the buffer) 703 * necessarily has the CONT bit set. 704 * So send one word less during this go, to force a split and a command 705 * with a single word next time, when CONT will be unset. 706 */ 707 if (!(dspi->tx_cmd & SPI_PUSHR_CMD_CONT) && num_bytes == dspi->len) 708 tx_cmd |= SPI_PUSHR_CMD_EOQ; 709 710 /* Update CTARE */ 711 regmap_write(dspi->regmap, SPI_CTARE(0), 712 SPI_FRAME_EBITS(dspi->oper_bits_per_word) | 713 SPI_CTARE_DTCP(num_words)); 714 715 /* 716 * Write the CMD FIFO entry first, and then the two 717 * corresponding TX FIFO entries (or one...). 718 */ 719 dspi_pushr_cmd_write(dspi, tx_cmd); 720 721 /* Fill TX FIFO with as many transfers as possible */ 722 while (num_words--) { 723 u32 data = dspi_pop_tx(dspi); 724 725 dspi_pushr_txdata_write(dspi, data & 0xFFFF); 726 if (dspi->oper_bits_per_word > 16) 727 dspi_pushr_txdata_write(dspi, data >> 16); 728 } 729 } 730 731 static u32 dspi_popr_read(struct fsl_dspi *dspi) 732 { 733 u32 rxdata = 0; 734 735 regmap_read(dspi->regmap, SPI_POPR, &rxdata); 736 return rxdata; 737 } 738 739 static void dspi_fifo_read(struct fsl_dspi *dspi) 740 { 741 int num_fifo_entries = dspi->words_in_flight; 742 743 /* Read one FIFO entry and push to rx buffer */ 744 while (num_fifo_entries--) 745 dspi_push_rx(dspi, dspi_popr_read(dspi)); 746 } 747 748 static void dspi_setup_accel(struct fsl_dspi *dspi) 749 { 750 struct spi_transfer *xfer = dspi->cur_transfer; 751 bool odd = !!(dspi->len & 1); 752 753 /* No accel for frames not multiple of 8 bits at the moment */ 754 if (xfer->bits_per_word % 8) 755 goto no_accel; 756 757 if (!odd && dspi->len <= dspi->devtype_data->fifo_size * 2) { 758 dspi->oper_bits_per_word = 16; 759 } else if (odd && dspi->len <= dspi->devtype_data->fifo_size) { 760 dspi->oper_bits_per_word = 8; 761 } else { 762 /* Start off with maximum supported by hardware */ 763 if (dspi->devtype_data->trans_mode == DSPI_XSPI_MODE) 764 dspi->oper_bits_per_word = 32; 765 else 766 dspi->oper_bits_per_word = 16; 767 768 /* 769 * And go down only if the buffer can't be sent with 770 * words this big 771 */ 772 do { 773 if (dspi->len >= DIV_ROUND_UP(dspi->oper_bits_per_word, 8)) 774 break; 775 776 dspi->oper_bits_per_word /= 2; 777 } while (dspi->oper_bits_per_word > 8); 778 } 779 780 if (xfer->bits_per_word == 8 && dspi->oper_bits_per_word == 32) { 781 dspi->dev_to_host = dspi_8on32_dev_to_host; 782 dspi->host_to_dev = dspi_8on32_host_to_dev; 783 } else if (xfer->bits_per_word == 8 && dspi->oper_bits_per_word == 16) { 784 dspi->dev_to_host = dspi_8on16_dev_to_host; 785 dspi->host_to_dev = dspi_8on16_host_to_dev; 786 } else if (xfer->bits_per_word == 16 && dspi->oper_bits_per_word == 32) { 787 dspi->dev_to_host = dspi_16on32_dev_to_host; 788 dspi->host_to_dev = dspi_16on32_host_to_dev; 789 } else { 790 no_accel: 791 dspi->dev_to_host = dspi_native_dev_to_host; 792 dspi->host_to_dev = dspi_native_host_to_dev; 793 dspi->oper_bits_per_word = xfer->bits_per_word; 794 } 795 796 dspi->oper_word_size = DIV_ROUND_UP(dspi->oper_bits_per_word, 8); 797 798 /* 799 * Update CTAR here (code is common for XSPI and DMA modes). 800 * We will update CTARE in the portion specific to XSPI, when we 801 * also know the preload value (DTCP). 802 */ 803 regmap_write(dspi->regmap, SPI_CTAR(0), 804 dspi->cur_chip->ctar_val | 805 SPI_FRAME_BITS(dspi->oper_bits_per_word)); 806 } 807 808 static void dspi_fifo_write(struct fsl_dspi *dspi) 809 { 810 int num_fifo_entries = dspi->devtype_data->fifo_size; 811 struct spi_transfer *xfer = dspi->cur_transfer; 812 struct spi_message *msg = dspi->cur_msg; 813 int num_words, num_bytes; 814 815 dspi_setup_accel(dspi); 816 817 /* In XSPI mode each 32-bit word occupies 2 TX FIFO entries */ 818 if (dspi->oper_word_size == 4) 819 num_fifo_entries /= 2; 820 821 /* 822 * Integer division intentionally trims off odd (or non-multiple of 4) 823 * numbers of bytes at the end of the buffer, which will be sent next 824 * time using a smaller oper_word_size. 825 */ 826 num_words = dspi->len / dspi->oper_word_size; 827 if (num_words > num_fifo_entries) 828 num_words = num_fifo_entries; 829 830 /* Update total number of bytes that were transferred */ 831 num_bytes = num_words * dspi->oper_word_size; 832 msg->actual_length += num_bytes; 833 dspi->progress += num_bytes / DIV_ROUND_UP(xfer->bits_per_word, 8); 834 835 /* 836 * Update shared variable for use in the next interrupt (both in 837 * dspi_fifo_read and in dspi_fifo_write). 838 */ 839 dspi->words_in_flight = num_words; 840 841 spi_take_timestamp_pre(dspi->ctlr, xfer, dspi->progress, !dspi->irq); 842 843 dspi_xspi_fifo_write(dspi, num_words); 844 /* 845 * Everything after this point is in a potential race with the next 846 * interrupt, so we must never use dspi->words_in_flight again since it 847 * might already be modified by the next dspi_fifo_write. 848 */ 849 850 spi_take_timestamp_post(dspi->ctlr, dspi->cur_transfer, 851 dspi->progress, !dspi->irq); 852 } 853 854 static int dspi_rxtx(struct fsl_dspi *dspi) 855 { 856 dspi_fifo_read(dspi); 857 858 if (!dspi->len) 859 /* Success! */ 860 return 0; 861 862 dspi_fifo_write(dspi); 863 864 return -EINPROGRESS; 865 } 866 867 static int dspi_poll(struct fsl_dspi *dspi) 868 { 869 int tries = 1000; 870 u32 spi_sr; 871 872 do { 873 regmap_read(dspi->regmap, SPI_SR, &spi_sr); 874 regmap_write(dspi->regmap, SPI_SR, spi_sr); 875 876 if (spi_sr & SPI_SR_CMDTCF) 877 break; 878 } while (--tries); 879 880 if (!tries) 881 return -ETIMEDOUT; 882 883 return dspi_rxtx(dspi); 884 } 885 886 static irqreturn_t dspi_interrupt(int irq, void *dev_id) 887 { 888 struct fsl_dspi *dspi = (struct fsl_dspi *)dev_id; 889 u32 spi_sr; 890 891 regmap_read(dspi->regmap, SPI_SR, &spi_sr); 892 regmap_write(dspi->regmap, SPI_SR, spi_sr); 893 894 if (!(spi_sr & SPI_SR_CMDTCF)) 895 return IRQ_NONE; 896 897 if (dspi_rxtx(dspi) == 0) 898 complete(&dspi->xfer_done); 899 900 return IRQ_HANDLED; 901 } 902 903 static void dspi_assert_cs(struct spi_device *spi, bool *cs) 904 { 905 if (!spi_get_csgpiod(spi, 0) || *cs) 906 return; 907 908 gpiod_set_value_cansleep(spi_get_csgpiod(spi, 0), true); 909 *cs = true; 910 } 911 912 static void dspi_deassert_cs(struct spi_device *spi, bool *cs) 913 { 914 if (!spi_get_csgpiod(spi, 0) || !*cs) 915 return; 916 917 gpiod_set_value_cansleep(spi_get_csgpiod(spi, 0), false); 918 *cs = false; 919 } 920 921 static int dspi_transfer_one_message(struct spi_controller *ctlr, 922 struct spi_message *message) 923 { 924 struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr); 925 struct spi_device *spi = message->spi; 926 struct spi_transfer *transfer; 927 bool cs = false; 928 int status = 0; 929 930 message->actual_length = 0; 931 932 list_for_each_entry(transfer, &message->transfers, transfer_list) { 933 dspi->cur_transfer = transfer; 934 dspi->cur_msg = message; 935 dspi->cur_chip = spi_get_ctldata(spi); 936 937 dspi_assert_cs(spi, &cs); 938 939 /* Prepare command word for CMD FIFO */ 940 dspi->tx_cmd = SPI_PUSHR_CMD_CTAS(0); 941 if (!spi_get_csgpiod(spi, 0)) 942 dspi->tx_cmd |= SPI_PUSHR_CMD_PCS(spi_get_chipselect(spi, 0)); 943 944 if (list_is_last(&dspi->cur_transfer->transfer_list, 945 &dspi->cur_msg->transfers)) { 946 /* Leave PCS activated after last transfer when 947 * cs_change is set. 948 */ 949 if (transfer->cs_change) 950 dspi->tx_cmd |= SPI_PUSHR_CMD_CONT; 951 } else { 952 /* Keep PCS active between transfers in same message 953 * when cs_change is not set, and de-activate PCS 954 * between transfers in the same message when 955 * cs_change is set. 956 */ 957 if (!transfer->cs_change) 958 dspi->tx_cmd |= SPI_PUSHR_CMD_CONT; 959 } 960 961 dspi->tx = transfer->tx_buf; 962 dspi->rx = transfer->rx_buf; 963 dspi->len = transfer->len; 964 dspi->progress = 0; 965 966 regmap_update_bits(dspi->regmap, SPI_MCR, 967 SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF, 968 SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF); 969 970 spi_take_timestamp_pre(dspi->ctlr, dspi->cur_transfer, 971 dspi->progress, !dspi->irq); 972 973 if (dspi->devtype_data->trans_mode == DSPI_DMA_MODE) { 974 status = dspi_dma_xfer(dspi); 975 } else { 976 dspi_fifo_write(dspi); 977 978 if (dspi->irq) { 979 wait_for_completion(&dspi->xfer_done); 980 reinit_completion(&dspi->xfer_done); 981 } else { 982 do { 983 status = dspi_poll(dspi); 984 } while (status == -EINPROGRESS); 985 } 986 } 987 if (status) 988 break; 989 990 spi_transfer_delay_exec(transfer); 991 992 if (!(dspi->tx_cmd & SPI_PUSHR_CMD_CONT)) 993 dspi_deassert_cs(spi, &cs); 994 } 995 996 message->status = status; 997 spi_finalize_current_message(ctlr); 998 999 return status; 1000 } 1001 1002 static int dspi_setup(struct spi_device *spi) 1003 { 1004 struct fsl_dspi *dspi = spi_controller_get_devdata(spi->controller); 1005 u32 period_ns = DIV_ROUND_UP(NSEC_PER_SEC, spi->max_speed_hz); 1006 unsigned char br = 0, pbr = 0, pcssck = 0, cssck = 0; 1007 u32 quarter_period_ns = DIV_ROUND_UP(period_ns, 4); 1008 u32 cs_sck_delay = 0, sck_cs_delay = 0; 1009 struct fsl_dspi_platform_data *pdata; 1010 unsigned char pasc = 0, asc = 0; 1011 struct chip_data *chip; 1012 unsigned long clkrate; 1013 bool cs = true; 1014 1015 /* Only alloc on first setup */ 1016 chip = spi_get_ctldata(spi); 1017 if (chip == NULL) { 1018 chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL); 1019 if (!chip) 1020 return -ENOMEM; 1021 } 1022 1023 pdata = dev_get_platdata(&dspi->pdev->dev); 1024 1025 if (!pdata) { 1026 of_property_read_u32(spi->dev.of_node, "fsl,spi-cs-sck-delay", 1027 &cs_sck_delay); 1028 1029 of_property_read_u32(spi->dev.of_node, "fsl,spi-sck-cs-delay", 1030 &sck_cs_delay); 1031 } else { 1032 cs_sck_delay = pdata->cs_sck_delay; 1033 sck_cs_delay = pdata->sck_cs_delay; 1034 } 1035 1036 /* Since tCSC and tASC apply to continuous transfers too, avoid SCK 1037 * glitches of half a cycle by never allowing tCSC + tASC to go below 1038 * half a SCK period. 1039 */ 1040 if (cs_sck_delay < quarter_period_ns) 1041 cs_sck_delay = quarter_period_ns; 1042 if (sck_cs_delay < quarter_period_ns) 1043 sck_cs_delay = quarter_period_ns; 1044 1045 dev_dbg(&spi->dev, 1046 "DSPI controller timing params: CS-to-SCK delay %u ns, SCK-to-CS delay %u ns\n", 1047 cs_sck_delay, sck_cs_delay); 1048 1049 clkrate = clk_get_rate(dspi->clk); 1050 hz_to_spi_baud(&pbr, &br, spi->max_speed_hz, clkrate); 1051 1052 /* Set PCS to SCK delay scale values */ 1053 ns_delay_scale(&pcssck, &cssck, cs_sck_delay, clkrate); 1054 1055 /* Set After SCK delay scale values */ 1056 ns_delay_scale(&pasc, &asc, sck_cs_delay, clkrate); 1057 1058 chip->ctar_val = 0; 1059 if (spi->mode & SPI_CPOL) 1060 chip->ctar_val |= SPI_CTAR_CPOL; 1061 if (spi->mode & SPI_CPHA) 1062 chip->ctar_val |= SPI_CTAR_CPHA; 1063 1064 if (!spi_controller_is_target(dspi->ctlr)) { 1065 chip->ctar_val |= SPI_CTAR_PCSSCK(pcssck) | 1066 SPI_CTAR_CSSCK(cssck) | 1067 SPI_CTAR_PASC(pasc) | 1068 SPI_CTAR_ASC(asc) | 1069 SPI_CTAR_PBR(pbr) | 1070 SPI_CTAR_BR(br); 1071 1072 if (spi->mode & SPI_LSB_FIRST) 1073 chip->ctar_val |= SPI_CTAR_LSBFE; 1074 } 1075 1076 gpiod_direction_output(spi_get_csgpiod(spi, 0), false); 1077 dspi_deassert_cs(spi, &cs); 1078 1079 spi_set_ctldata(spi, chip); 1080 1081 return 0; 1082 } 1083 1084 static void dspi_cleanup(struct spi_device *spi) 1085 { 1086 struct chip_data *chip = spi_get_ctldata(spi); 1087 1088 dev_dbg(&spi->dev, "spi_device %u.%u cleanup\n", 1089 spi->controller->bus_num, spi_get_chipselect(spi, 0)); 1090 1091 kfree(chip); 1092 } 1093 1094 static const struct of_device_id fsl_dspi_dt_ids[] = { 1095 { 1096 .compatible = "fsl,vf610-dspi", 1097 .data = &devtype_data[VF610], 1098 }, { 1099 .compatible = "fsl,ls1021a-v1.0-dspi", 1100 .data = &devtype_data[LS1021A], 1101 }, { 1102 .compatible = "fsl,ls1012a-dspi", 1103 .data = &devtype_data[LS1012A], 1104 }, { 1105 .compatible = "fsl,ls1028a-dspi", 1106 .data = &devtype_data[LS1028A], 1107 }, { 1108 .compatible = "fsl,ls1043a-dspi", 1109 .data = &devtype_data[LS1043A], 1110 }, { 1111 .compatible = "fsl,ls1046a-dspi", 1112 .data = &devtype_data[LS1046A], 1113 }, { 1114 .compatible = "fsl,ls2080a-dspi", 1115 .data = &devtype_data[LS2080A], 1116 }, { 1117 .compatible = "fsl,ls2085a-dspi", 1118 .data = &devtype_data[LS2085A], 1119 }, { 1120 .compatible = "fsl,lx2160a-dspi", 1121 .data = &devtype_data[LX2160A], 1122 }, 1123 { /* sentinel */ } 1124 }; 1125 MODULE_DEVICE_TABLE(of, fsl_dspi_dt_ids); 1126 1127 #ifdef CONFIG_PM_SLEEP 1128 static int dspi_suspend(struct device *dev) 1129 { 1130 struct fsl_dspi *dspi = dev_get_drvdata(dev); 1131 1132 if (dspi->irq) 1133 disable_irq(dspi->irq); 1134 spi_controller_suspend(dspi->ctlr); 1135 clk_disable_unprepare(dspi->clk); 1136 1137 pinctrl_pm_select_sleep_state(dev); 1138 1139 return 0; 1140 } 1141 1142 static int dspi_resume(struct device *dev) 1143 { 1144 struct fsl_dspi *dspi = dev_get_drvdata(dev); 1145 int ret; 1146 1147 pinctrl_pm_select_default_state(dev); 1148 1149 ret = clk_prepare_enable(dspi->clk); 1150 if (ret) 1151 return ret; 1152 spi_controller_resume(dspi->ctlr); 1153 if (dspi->irq) 1154 enable_irq(dspi->irq); 1155 1156 return 0; 1157 } 1158 #endif /* CONFIG_PM_SLEEP */ 1159 1160 static SIMPLE_DEV_PM_OPS(dspi_pm, dspi_suspend, dspi_resume); 1161 1162 static const struct regmap_range dspi_volatile_ranges[] = { 1163 regmap_reg_range(SPI_MCR, SPI_TCR), 1164 regmap_reg_range(SPI_SR, SPI_SR), 1165 regmap_reg_range(SPI_PUSHR, SPI_RXFR3), 1166 }; 1167 1168 static const struct regmap_access_table dspi_volatile_table = { 1169 .yes_ranges = dspi_volatile_ranges, 1170 .n_yes_ranges = ARRAY_SIZE(dspi_volatile_ranges), 1171 }; 1172 1173 static const struct regmap_config dspi_regmap_config = { 1174 .reg_bits = 32, 1175 .val_bits = 32, 1176 .reg_stride = 4, 1177 .max_register = 0x88, 1178 .volatile_table = &dspi_volatile_table, 1179 }; 1180 1181 static const struct regmap_range dspi_xspi_volatile_ranges[] = { 1182 regmap_reg_range(SPI_MCR, SPI_TCR), 1183 regmap_reg_range(SPI_SR, SPI_SR), 1184 regmap_reg_range(SPI_PUSHR, SPI_RXFR3), 1185 regmap_reg_range(SPI_SREX, SPI_SREX), 1186 }; 1187 1188 static const struct regmap_access_table dspi_xspi_volatile_table = { 1189 .yes_ranges = dspi_xspi_volatile_ranges, 1190 .n_yes_ranges = ARRAY_SIZE(dspi_xspi_volatile_ranges), 1191 }; 1192 1193 static const struct regmap_config dspi_xspi_regmap_config[] = { 1194 { 1195 .reg_bits = 32, 1196 .val_bits = 32, 1197 .reg_stride = 4, 1198 .max_register = 0x13c, 1199 .volatile_table = &dspi_xspi_volatile_table, 1200 }, 1201 { 1202 .name = "pushr", 1203 .reg_bits = 16, 1204 .val_bits = 16, 1205 .reg_stride = 2, 1206 .max_register = 0x2, 1207 }, 1208 }; 1209 1210 static int dspi_init(struct fsl_dspi *dspi) 1211 { 1212 unsigned int mcr; 1213 1214 /* Set idle states for all chip select signals to high */ 1215 mcr = SPI_MCR_PCSIS(GENMASK(dspi->ctlr->max_native_cs - 1, 0)); 1216 1217 if (dspi->devtype_data->trans_mode == DSPI_XSPI_MODE) 1218 mcr |= SPI_MCR_XSPI; 1219 if (!spi_controller_is_target(dspi->ctlr)) 1220 mcr |= SPI_MCR_HOST; 1221 1222 regmap_write(dspi->regmap, SPI_MCR, mcr); 1223 regmap_write(dspi->regmap, SPI_SR, SPI_SR_CLEAR); 1224 1225 switch (dspi->devtype_data->trans_mode) { 1226 case DSPI_XSPI_MODE: 1227 regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_CMDTCFE); 1228 break; 1229 case DSPI_DMA_MODE: 1230 regmap_write(dspi->regmap, SPI_RSER, 1231 SPI_RSER_TFFFE | SPI_RSER_TFFFD | 1232 SPI_RSER_RFDFE | SPI_RSER_RFDFD); 1233 break; 1234 default: 1235 dev_err(&dspi->pdev->dev, "unsupported trans_mode %u\n", 1236 dspi->devtype_data->trans_mode); 1237 return -EINVAL; 1238 } 1239 1240 return 0; 1241 } 1242 1243 static int dspi_target_abort(struct spi_controller *host) 1244 { 1245 struct fsl_dspi *dspi = spi_controller_get_devdata(host); 1246 1247 /* 1248 * Terminate all pending DMA transactions for the SPI working 1249 * in TARGET mode. 1250 */ 1251 if (dspi->devtype_data->trans_mode == DSPI_DMA_MODE) { 1252 dmaengine_terminate_sync(dspi->dma->chan_rx); 1253 dmaengine_terminate_sync(dspi->dma->chan_tx); 1254 } 1255 1256 /* Clear the internal DSPI RX and TX FIFO buffers */ 1257 regmap_update_bits(dspi->regmap, SPI_MCR, 1258 SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF, 1259 SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF); 1260 1261 return 0; 1262 } 1263 1264 static int dspi_probe(struct platform_device *pdev) 1265 { 1266 struct device_node *np = pdev->dev.of_node; 1267 const struct regmap_config *regmap_config; 1268 struct fsl_dspi_platform_data *pdata; 1269 struct spi_controller *ctlr; 1270 int ret, cs_num, bus_num = -1; 1271 struct fsl_dspi *dspi; 1272 struct resource *res; 1273 void __iomem *base; 1274 bool big_endian; 1275 1276 dspi = devm_kzalloc(&pdev->dev, sizeof(*dspi), GFP_KERNEL); 1277 if (!dspi) 1278 return -ENOMEM; 1279 1280 ctlr = spi_alloc_host(&pdev->dev, 0); 1281 if (!ctlr) 1282 return -ENOMEM; 1283 1284 spi_controller_set_devdata(ctlr, dspi); 1285 platform_set_drvdata(pdev, dspi); 1286 1287 dspi->pdev = pdev; 1288 dspi->ctlr = ctlr; 1289 1290 ctlr->setup = dspi_setup; 1291 ctlr->transfer_one_message = dspi_transfer_one_message; 1292 ctlr->dev.of_node = pdev->dev.of_node; 1293 1294 ctlr->cleanup = dspi_cleanup; 1295 ctlr->target_abort = dspi_target_abort; 1296 ctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST; 1297 ctlr->use_gpio_descriptors = true; 1298 1299 pdata = dev_get_platdata(&pdev->dev); 1300 if (pdata) { 1301 ctlr->num_chipselect = ctlr->max_native_cs = pdata->cs_num; 1302 ctlr->bus_num = pdata->bus_num; 1303 1304 /* Only Coldfire uses platform data */ 1305 dspi->devtype_data = &devtype_data[MCF5441X]; 1306 big_endian = true; 1307 } else { 1308 1309 ret = of_property_read_u32(np, "spi-num-chipselects", &cs_num); 1310 if (ret < 0) { 1311 dev_err(&pdev->dev, "can't get spi-num-chipselects\n"); 1312 goto out_ctlr_put; 1313 } 1314 ctlr->num_chipselect = ctlr->max_native_cs = cs_num; 1315 1316 of_property_read_u32(np, "bus-num", &bus_num); 1317 ctlr->bus_num = bus_num; 1318 1319 if (of_property_read_bool(np, "spi-slave")) 1320 ctlr->target = true; 1321 1322 dspi->devtype_data = of_device_get_match_data(&pdev->dev); 1323 if (!dspi->devtype_data) { 1324 dev_err(&pdev->dev, "can't get devtype_data\n"); 1325 ret = -EFAULT; 1326 goto out_ctlr_put; 1327 } 1328 1329 big_endian = of_device_is_big_endian(np); 1330 } 1331 if (big_endian) { 1332 dspi->pushr_cmd = 0; 1333 dspi->pushr_tx = 2; 1334 } else { 1335 dspi->pushr_cmd = 2; 1336 dspi->pushr_tx = 0; 1337 } 1338 1339 if (dspi->devtype_data->trans_mode == DSPI_XSPI_MODE) 1340 ctlr->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32); 1341 else 1342 ctlr->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16); 1343 1344 base = devm_platform_get_and_ioremap_resource(pdev, 0, &res); 1345 if (IS_ERR(base)) { 1346 ret = PTR_ERR(base); 1347 goto out_ctlr_put; 1348 } 1349 1350 if (dspi->devtype_data->trans_mode == DSPI_XSPI_MODE) 1351 regmap_config = &dspi_xspi_regmap_config[0]; 1352 else 1353 regmap_config = &dspi_regmap_config; 1354 dspi->regmap = devm_regmap_init_mmio(&pdev->dev, base, regmap_config); 1355 if (IS_ERR(dspi->regmap)) { 1356 dev_err(&pdev->dev, "failed to init regmap: %ld\n", 1357 PTR_ERR(dspi->regmap)); 1358 ret = PTR_ERR(dspi->regmap); 1359 goto out_ctlr_put; 1360 } 1361 1362 if (dspi->devtype_data->trans_mode == DSPI_XSPI_MODE) { 1363 dspi->regmap_pushr = devm_regmap_init_mmio( 1364 &pdev->dev, base + SPI_PUSHR, 1365 &dspi_xspi_regmap_config[1]); 1366 if (IS_ERR(dspi->regmap_pushr)) { 1367 dev_err(&pdev->dev, 1368 "failed to init pushr regmap: %ld\n", 1369 PTR_ERR(dspi->regmap_pushr)); 1370 ret = PTR_ERR(dspi->regmap_pushr); 1371 goto out_ctlr_put; 1372 } 1373 } 1374 1375 dspi->clk = devm_clk_get(&pdev->dev, "dspi"); 1376 if (IS_ERR(dspi->clk)) { 1377 ret = PTR_ERR(dspi->clk); 1378 dev_err(&pdev->dev, "unable to get clock\n"); 1379 goto out_ctlr_put; 1380 } 1381 ret = clk_prepare_enable(dspi->clk); 1382 if (ret) 1383 goto out_ctlr_put; 1384 1385 ret = dspi_init(dspi); 1386 if (ret) 1387 goto out_clk_put; 1388 1389 dspi->irq = platform_get_irq(pdev, 0); 1390 if (dspi->irq <= 0) { 1391 dev_info(&pdev->dev, 1392 "can't get platform irq, using poll mode\n"); 1393 dspi->irq = 0; 1394 goto poll_mode; 1395 } 1396 1397 init_completion(&dspi->xfer_done); 1398 1399 ret = request_threaded_irq(dspi->irq, dspi_interrupt, NULL, 1400 IRQF_SHARED, pdev->name, dspi); 1401 if (ret < 0) { 1402 dev_err(&pdev->dev, "Unable to attach DSPI interrupt\n"); 1403 goto out_clk_put; 1404 } 1405 1406 poll_mode: 1407 1408 if (dspi->devtype_data->trans_mode == DSPI_DMA_MODE) { 1409 ret = dspi_request_dma(dspi, res->start); 1410 if (ret < 0) { 1411 dev_err(&pdev->dev, "can't get dma channels\n"); 1412 goto out_free_irq; 1413 } 1414 } 1415 1416 ctlr->max_speed_hz = 1417 clk_get_rate(dspi->clk) / dspi->devtype_data->max_clock_factor; 1418 1419 if (dspi->devtype_data->trans_mode != DSPI_DMA_MODE) 1420 ctlr->ptp_sts_supported = true; 1421 1422 ret = spi_register_controller(ctlr); 1423 if (ret != 0) { 1424 dev_err(&pdev->dev, "Problem registering DSPI ctlr\n"); 1425 goto out_release_dma; 1426 } 1427 1428 return ret; 1429 1430 out_release_dma: 1431 dspi_release_dma(dspi); 1432 out_free_irq: 1433 if (dspi->irq) 1434 free_irq(dspi->irq, dspi); 1435 out_clk_put: 1436 clk_disable_unprepare(dspi->clk); 1437 out_ctlr_put: 1438 spi_controller_put(ctlr); 1439 1440 return ret; 1441 } 1442 1443 static void dspi_remove(struct platform_device *pdev) 1444 { 1445 struct fsl_dspi *dspi = platform_get_drvdata(pdev); 1446 1447 /* Disconnect from the SPI framework */ 1448 spi_unregister_controller(dspi->ctlr); 1449 1450 /* Disable RX and TX */ 1451 regmap_update_bits(dspi->regmap, SPI_MCR, 1452 SPI_MCR_DIS_TXF | SPI_MCR_DIS_RXF, 1453 SPI_MCR_DIS_TXF | SPI_MCR_DIS_RXF); 1454 1455 /* Stop Running */ 1456 regmap_update_bits(dspi->regmap, SPI_MCR, SPI_MCR_HALT, SPI_MCR_HALT); 1457 1458 dspi_release_dma(dspi); 1459 if (dspi->irq) 1460 free_irq(dspi->irq, dspi); 1461 clk_disable_unprepare(dspi->clk); 1462 } 1463 1464 static void dspi_shutdown(struct platform_device *pdev) 1465 { 1466 dspi_remove(pdev); 1467 } 1468 1469 static struct platform_driver fsl_dspi_driver = { 1470 .driver.name = DRIVER_NAME, 1471 .driver.of_match_table = fsl_dspi_dt_ids, 1472 .driver.owner = THIS_MODULE, 1473 .driver.pm = &dspi_pm, 1474 .probe = dspi_probe, 1475 .remove_new = dspi_remove, 1476 .shutdown = dspi_shutdown, 1477 }; 1478 module_platform_driver(fsl_dspi_driver); 1479 1480 MODULE_DESCRIPTION("Freescale DSPI Controller Driver"); 1481 MODULE_LICENSE("GPL"); 1482 MODULE_ALIAS("platform:" DRIVER_NAME); 1483