1 /* SPDX-License-Identifier: GPL-2.0 */ 2 #ifndef DW_SPI_HEADER_H 3 #define DW_SPI_HEADER_H 4 5 #include <linux/io.h> 6 #include <linux/scatterlist.h> 7 8 /* Register offsets */ 9 #define DW_SPI_CTRL0 0x00 10 #define DW_SPI_CTRL1 0x04 11 #define DW_SPI_SSIENR 0x08 12 #define DW_SPI_MWCR 0x0c 13 #define DW_SPI_SER 0x10 14 #define DW_SPI_BAUDR 0x14 15 #define DW_SPI_TXFLTR 0x18 16 #define DW_SPI_RXFLTR 0x1c 17 #define DW_SPI_TXFLR 0x20 18 #define DW_SPI_RXFLR 0x24 19 #define DW_SPI_SR 0x28 20 #define DW_SPI_IMR 0x2c 21 #define DW_SPI_ISR 0x30 22 #define DW_SPI_RISR 0x34 23 #define DW_SPI_TXOICR 0x38 24 #define DW_SPI_RXOICR 0x3c 25 #define DW_SPI_RXUICR 0x40 26 #define DW_SPI_MSTICR 0x44 27 #define DW_SPI_ICR 0x48 28 #define DW_SPI_DMACR 0x4c 29 #define DW_SPI_DMATDLR 0x50 30 #define DW_SPI_DMARDLR 0x54 31 #define DW_SPI_IDR 0x58 32 #define DW_SPI_VERSION 0x5c 33 #define DW_SPI_DR 0x60 34 #define DW_SPI_CS_OVERRIDE 0xf4 35 36 /* Bit fields in CTRLR0 */ 37 #define SPI_DFS_OFFSET 0 38 39 #define SPI_FRF_OFFSET 4 40 #define SPI_FRF_SPI 0x0 41 #define SPI_FRF_SSP 0x1 42 #define SPI_FRF_MICROWIRE 0x2 43 #define SPI_FRF_RESV 0x3 44 45 #define SPI_MODE_OFFSET 6 46 #define SPI_SCPH_OFFSET 6 47 #define SPI_SCOL_OFFSET 7 48 49 #define SPI_TMOD_OFFSET 8 50 #define SPI_TMOD_MASK (0x3 << SPI_TMOD_OFFSET) 51 #define SPI_TMOD_TR 0x0 /* xmit & recv */ 52 #define SPI_TMOD_TO 0x1 /* xmit only */ 53 #define SPI_TMOD_RO 0x2 /* recv only */ 54 #define SPI_TMOD_EPROMREAD 0x3 /* eeprom read mode */ 55 56 #define SPI_SLVOE_OFFSET 10 57 #define SPI_SRL_OFFSET 11 58 #define SPI_CFS_OFFSET 12 59 60 /* Bit fields in SR, 7 bits */ 61 #define SR_MASK 0x7f /* cover 7 bits */ 62 #define SR_BUSY (1 << 0) 63 #define SR_TF_NOT_FULL (1 << 1) 64 #define SR_TF_EMPT (1 << 2) 65 #define SR_RF_NOT_EMPT (1 << 3) 66 #define SR_RF_FULL (1 << 4) 67 #define SR_TX_ERR (1 << 5) 68 #define SR_DCOL (1 << 6) 69 70 /* Bit fields in ISR, IMR, RISR, 7 bits */ 71 #define SPI_INT_TXEI (1 << 0) 72 #define SPI_INT_TXOI (1 << 1) 73 #define SPI_INT_RXUI (1 << 2) 74 #define SPI_INT_RXOI (1 << 3) 75 #define SPI_INT_RXFI (1 << 4) 76 #define SPI_INT_MSTI (1 << 5) 77 78 /* Bit fields in DMACR */ 79 #define SPI_DMA_RDMAE (1 << 0) 80 #define SPI_DMA_TDMAE (1 << 1) 81 82 /* TX RX interrupt level threshold, max can be 256 */ 83 #define SPI_INT_THRESHOLD 32 84 85 enum dw_ssi_type { 86 SSI_MOTO_SPI = 0, 87 SSI_TI_SSP, 88 SSI_NS_MICROWIRE, 89 }; 90 91 struct dw_spi; 92 struct dw_spi_dma_ops { 93 int (*dma_init)(struct dw_spi *dws); 94 void (*dma_exit)(struct dw_spi *dws); 95 int (*dma_setup)(struct dw_spi *dws, struct spi_transfer *xfer); 96 bool (*can_dma)(struct spi_controller *master, struct spi_device *spi, 97 struct spi_transfer *xfer); 98 int (*dma_transfer)(struct dw_spi *dws, struct spi_transfer *xfer); 99 void (*dma_stop)(struct dw_spi *dws); 100 }; 101 102 struct dw_spi { 103 struct spi_controller *master; 104 enum dw_ssi_type type; 105 106 void __iomem *regs; 107 unsigned long paddr; 108 int irq; 109 u32 fifo_len; /* depth of the FIFO buffer */ 110 u32 max_freq; /* max bus freq supported */ 111 112 int cs_override; 113 u32 reg_io_width; /* DR I/O width in bytes */ 114 u16 bus_num; 115 u16 num_cs; /* supported slave numbers */ 116 void (*set_cs)(struct spi_device *spi, bool enable); 117 118 /* Current message transfer state info */ 119 size_t len; 120 void *tx; 121 void *tx_end; 122 spinlock_t buf_lock; 123 void *rx; 124 void *rx_end; 125 int dma_mapped; 126 u8 n_bytes; /* current is a 1/2 bytes op */ 127 u32 dma_width; 128 irqreturn_t (*transfer_handler)(struct dw_spi *dws); 129 u32 current_freq; /* frequency in hz */ 130 131 /* DMA info */ 132 int dma_inited; 133 struct dma_chan *txchan; 134 struct dma_chan *rxchan; 135 unsigned long dma_chan_busy; 136 dma_addr_t dma_addr; /* phy address of the Data register */ 137 const struct dw_spi_dma_ops *dma_ops; 138 void *dma_tx; 139 void *dma_rx; 140 141 /* Bus interface info */ 142 void *priv; 143 #ifdef CONFIG_DEBUG_FS 144 struct dentry *debugfs; 145 #endif 146 }; 147 148 static inline u32 dw_readl(struct dw_spi *dws, u32 offset) 149 { 150 return __raw_readl(dws->regs + offset); 151 } 152 153 static inline u16 dw_readw(struct dw_spi *dws, u32 offset) 154 { 155 return __raw_readw(dws->regs + offset); 156 } 157 158 static inline void dw_writel(struct dw_spi *dws, u32 offset, u32 val) 159 { 160 __raw_writel(val, dws->regs + offset); 161 } 162 163 static inline void dw_writew(struct dw_spi *dws, u32 offset, u16 val) 164 { 165 __raw_writew(val, dws->regs + offset); 166 } 167 168 static inline u32 dw_read_io_reg(struct dw_spi *dws, u32 offset) 169 { 170 switch (dws->reg_io_width) { 171 case 2: 172 return dw_readw(dws, offset); 173 case 4: 174 default: 175 return dw_readl(dws, offset); 176 } 177 } 178 179 static inline void dw_write_io_reg(struct dw_spi *dws, u32 offset, u32 val) 180 { 181 switch (dws->reg_io_width) { 182 case 2: 183 dw_writew(dws, offset, val); 184 break; 185 case 4: 186 default: 187 dw_writel(dws, offset, val); 188 break; 189 } 190 } 191 192 static inline void spi_enable_chip(struct dw_spi *dws, int enable) 193 { 194 dw_writel(dws, DW_SPI_SSIENR, (enable ? 1 : 0)); 195 } 196 197 static inline void spi_set_clk(struct dw_spi *dws, u16 div) 198 { 199 dw_writel(dws, DW_SPI_BAUDR, div); 200 } 201 202 /* Disable IRQ bits */ 203 static inline void spi_mask_intr(struct dw_spi *dws, u32 mask) 204 { 205 u32 new_mask; 206 207 new_mask = dw_readl(dws, DW_SPI_IMR) & ~mask; 208 dw_writel(dws, DW_SPI_IMR, new_mask); 209 } 210 211 /* Enable IRQ bits */ 212 static inline void spi_umask_intr(struct dw_spi *dws, u32 mask) 213 { 214 u32 new_mask; 215 216 new_mask = dw_readl(dws, DW_SPI_IMR) | mask; 217 dw_writel(dws, DW_SPI_IMR, new_mask); 218 } 219 220 /* 221 * This does disable the SPI controller, interrupts, and re-enable the 222 * controller back. Transmit and receive FIFO buffers are cleared when the 223 * device is disabled. 224 */ 225 static inline void spi_reset_chip(struct dw_spi *dws) 226 { 227 spi_enable_chip(dws, 0); 228 spi_mask_intr(dws, 0xff); 229 spi_enable_chip(dws, 1); 230 } 231 232 static inline void spi_shutdown_chip(struct dw_spi *dws) 233 { 234 spi_enable_chip(dws, 0); 235 spi_set_clk(dws, 0); 236 } 237 238 /* 239 * Each SPI slave device to work with dw_api controller should 240 * has such a structure claiming its working mode (poll or PIO/DMA), 241 * which can be save in the "controller_data" member of the 242 * struct spi_device. 243 */ 244 struct dw_spi_chip { 245 u8 poll_mode; /* 1 for controller polling mode */ 246 u8 type; /* SPI/SSP/MicroWire */ 247 void (*cs_control)(u32 command); 248 }; 249 250 extern void dw_spi_set_cs(struct spi_device *spi, bool enable); 251 extern int dw_spi_add_host(struct device *dev, struct dw_spi *dws); 252 extern void dw_spi_remove_host(struct dw_spi *dws); 253 extern int dw_spi_suspend_host(struct dw_spi *dws); 254 extern int dw_spi_resume_host(struct dw_spi *dws); 255 256 /* platform related setup */ 257 extern int dw_spi_mid_init(struct dw_spi *dws); /* Intel MID platforms */ 258 #endif /* DW_SPI_HEADER_H */ 259