1 /* 2 * Copyright (C) 2009 Texas Instruments. 3 * Copyright (C) 2010 EF Johnson Technologies 4 * 5 * This program is free software; you can redistribute it and/or modify 6 * it under the terms of the GNU General Public License as published by 7 * the Free Software Foundation; either version 2 of the License, or 8 * (at your option) any later version. 9 * 10 * This program is distributed in the hope that it will be useful, 11 * but WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 * GNU General Public License for more details. 14 */ 15 16 #include <linux/interrupt.h> 17 #include <linux/io.h> 18 #include <linux/gpio.h> 19 #include <linux/module.h> 20 #include <linux/delay.h> 21 #include <linux/platform_device.h> 22 #include <linux/err.h> 23 #include <linux/clk.h> 24 #include <linux/dmaengine.h> 25 #include <linux/dma-mapping.h> 26 #include <linux/edma.h> 27 #include <linux/of.h> 28 #include <linux/of_device.h> 29 #include <linux/of_gpio.h> 30 #include <linux/spi/spi.h> 31 #include <linux/spi/spi_bitbang.h> 32 #include <linux/slab.h> 33 34 #include <linux/platform_data/spi-davinci.h> 35 36 #define SPI_NO_RESOURCE ((resource_size_t)-1) 37 38 #define CS_DEFAULT 0xFF 39 40 #define SPIFMT_PHASE_MASK BIT(16) 41 #define SPIFMT_POLARITY_MASK BIT(17) 42 #define SPIFMT_DISTIMER_MASK BIT(18) 43 #define SPIFMT_SHIFTDIR_MASK BIT(20) 44 #define SPIFMT_WAITENA_MASK BIT(21) 45 #define SPIFMT_PARITYENA_MASK BIT(22) 46 #define SPIFMT_ODD_PARITY_MASK BIT(23) 47 #define SPIFMT_WDELAY_MASK 0x3f000000u 48 #define SPIFMT_WDELAY_SHIFT 24 49 #define SPIFMT_PRESCALE_SHIFT 8 50 51 /* SPIPC0 */ 52 #define SPIPC0_DIFUN_MASK BIT(11) /* MISO */ 53 #define SPIPC0_DOFUN_MASK BIT(10) /* MOSI */ 54 #define SPIPC0_CLKFUN_MASK BIT(9) /* CLK */ 55 #define SPIPC0_SPIENA_MASK BIT(8) /* nREADY */ 56 57 #define SPIINT_MASKALL 0x0101035F 58 #define SPIINT_MASKINT 0x0000015F 59 #define SPI_INTLVL_1 0x000001FF 60 #define SPI_INTLVL_0 0x00000000 61 62 /* SPIDAT1 (upper 16 bit defines) */ 63 #define SPIDAT1_CSHOLD_MASK BIT(12) 64 #define SPIDAT1_WDEL BIT(10) 65 66 /* SPIGCR1 */ 67 #define SPIGCR1_CLKMOD_MASK BIT(1) 68 #define SPIGCR1_MASTER_MASK BIT(0) 69 #define SPIGCR1_POWERDOWN_MASK BIT(8) 70 #define SPIGCR1_LOOPBACK_MASK BIT(16) 71 #define SPIGCR1_SPIENA_MASK BIT(24) 72 73 /* SPIBUF */ 74 #define SPIBUF_TXFULL_MASK BIT(29) 75 #define SPIBUF_RXEMPTY_MASK BIT(31) 76 77 /* SPIDELAY */ 78 #define SPIDELAY_C2TDELAY_SHIFT 24 79 #define SPIDELAY_C2TDELAY_MASK (0xFF << SPIDELAY_C2TDELAY_SHIFT) 80 #define SPIDELAY_T2CDELAY_SHIFT 16 81 #define SPIDELAY_T2CDELAY_MASK (0xFF << SPIDELAY_T2CDELAY_SHIFT) 82 #define SPIDELAY_T2EDELAY_SHIFT 8 83 #define SPIDELAY_T2EDELAY_MASK (0xFF << SPIDELAY_T2EDELAY_SHIFT) 84 #define SPIDELAY_C2EDELAY_SHIFT 0 85 #define SPIDELAY_C2EDELAY_MASK 0xFF 86 87 /* Error Masks */ 88 #define SPIFLG_DLEN_ERR_MASK BIT(0) 89 #define SPIFLG_TIMEOUT_MASK BIT(1) 90 #define SPIFLG_PARERR_MASK BIT(2) 91 #define SPIFLG_DESYNC_MASK BIT(3) 92 #define SPIFLG_BITERR_MASK BIT(4) 93 #define SPIFLG_OVRRUN_MASK BIT(6) 94 #define SPIFLG_BUF_INIT_ACTIVE_MASK BIT(24) 95 #define SPIFLG_ERROR_MASK (SPIFLG_DLEN_ERR_MASK \ 96 | SPIFLG_TIMEOUT_MASK | SPIFLG_PARERR_MASK \ 97 | SPIFLG_DESYNC_MASK | SPIFLG_BITERR_MASK \ 98 | SPIFLG_OVRRUN_MASK) 99 100 #define SPIINT_DMA_REQ_EN BIT(16) 101 102 /* SPI Controller registers */ 103 #define SPIGCR0 0x00 104 #define SPIGCR1 0x04 105 #define SPIINT 0x08 106 #define SPILVL 0x0c 107 #define SPIFLG 0x10 108 #define SPIPC0 0x14 109 #define SPIDAT1 0x3c 110 #define SPIBUF 0x40 111 #define SPIDELAY 0x48 112 #define SPIDEF 0x4c 113 #define SPIFMT0 0x50 114 115 /* SPI Controller driver's private data. */ 116 struct davinci_spi { 117 struct spi_bitbang bitbang; 118 struct clk *clk; 119 120 u8 version; 121 resource_size_t pbase; 122 void __iomem *base; 123 u32 irq; 124 struct completion done; 125 126 const void *tx; 127 void *rx; 128 int rcount; 129 int wcount; 130 131 struct dma_chan *dma_rx; 132 struct dma_chan *dma_tx; 133 int dma_rx_chnum; 134 int dma_tx_chnum; 135 136 struct davinci_spi_platform_data pdata; 137 138 void (*get_rx)(u32 rx_data, struct davinci_spi *); 139 u32 (*get_tx)(struct davinci_spi *); 140 141 u8 *bytes_per_word; 142 }; 143 144 static struct davinci_spi_config davinci_spi_default_cfg; 145 146 static void davinci_spi_rx_buf_u8(u32 data, struct davinci_spi *dspi) 147 { 148 if (dspi->rx) { 149 u8 *rx = dspi->rx; 150 *rx++ = (u8)data; 151 dspi->rx = rx; 152 } 153 } 154 155 static void davinci_spi_rx_buf_u16(u32 data, struct davinci_spi *dspi) 156 { 157 if (dspi->rx) { 158 u16 *rx = dspi->rx; 159 *rx++ = (u16)data; 160 dspi->rx = rx; 161 } 162 } 163 164 static u32 davinci_spi_tx_buf_u8(struct davinci_spi *dspi) 165 { 166 u32 data = 0; 167 168 if (dspi->tx) { 169 const u8 *tx = dspi->tx; 170 171 data = *tx++; 172 dspi->tx = tx; 173 } 174 return data; 175 } 176 177 static u32 davinci_spi_tx_buf_u16(struct davinci_spi *dspi) 178 { 179 u32 data = 0; 180 181 if (dspi->tx) { 182 const u16 *tx = dspi->tx; 183 184 data = *tx++; 185 dspi->tx = tx; 186 } 187 return data; 188 } 189 190 static inline void set_io_bits(void __iomem *addr, u32 bits) 191 { 192 u32 v = ioread32(addr); 193 194 v |= bits; 195 iowrite32(v, addr); 196 } 197 198 static inline void clear_io_bits(void __iomem *addr, u32 bits) 199 { 200 u32 v = ioread32(addr); 201 202 v &= ~bits; 203 iowrite32(v, addr); 204 } 205 206 /* 207 * Interface to control the chip select signal 208 */ 209 static void davinci_spi_chipselect(struct spi_device *spi, int value) 210 { 211 struct davinci_spi *dspi; 212 struct davinci_spi_platform_data *pdata; 213 struct davinci_spi_config *spicfg = spi->controller_data; 214 u8 chip_sel = spi->chip_select; 215 u16 spidat1 = CS_DEFAULT; 216 bool gpio_chipsel = false; 217 int gpio; 218 219 dspi = spi_master_get_devdata(spi->master); 220 pdata = &dspi->pdata; 221 222 if (spi->cs_gpio >= 0) { 223 /* SPI core parse and update master->cs_gpio */ 224 gpio_chipsel = true; 225 gpio = spi->cs_gpio; 226 } 227 228 /* program delay transfers if tx_delay is non zero */ 229 if (spicfg->wdelay) 230 spidat1 |= SPIDAT1_WDEL; 231 232 /* 233 * Board specific chip select logic decides the polarity and cs 234 * line for the controller 235 */ 236 if (gpio_chipsel) { 237 if (value == BITBANG_CS_ACTIVE) 238 gpio_set_value(gpio, spi->mode & SPI_CS_HIGH); 239 else 240 gpio_set_value(gpio, !(spi->mode & SPI_CS_HIGH)); 241 } else { 242 if (value == BITBANG_CS_ACTIVE) { 243 spidat1 |= SPIDAT1_CSHOLD_MASK; 244 spidat1 &= ~(0x1 << chip_sel); 245 } 246 } 247 248 iowrite16(spidat1, dspi->base + SPIDAT1 + 2); 249 } 250 251 /** 252 * davinci_spi_get_prescale - Calculates the correct prescale value 253 * @maxspeed_hz: the maximum rate the SPI clock can run at 254 * 255 * This function calculates the prescale value that generates a clock rate 256 * less than or equal to the specified maximum. 257 * 258 * Returns: calculated prescale - 1 for easy programming into SPI registers 259 * or negative error number if valid prescalar cannot be updated. 260 */ 261 static inline int davinci_spi_get_prescale(struct davinci_spi *dspi, 262 u32 max_speed_hz) 263 { 264 int ret; 265 266 ret = DIV_ROUND_UP(clk_get_rate(dspi->clk), max_speed_hz); 267 268 if (ret < 3 || ret > 256) 269 return -EINVAL; 270 271 return ret - 1; 272 } 273 274 /** 275 * davinci_spi_setup_transfer - This functions will determine transfer method 276 * @spi: spi device on which data transfer to be done 277 * @t: spi transfer in which transfer info is filled 278 * 279 * This function determines data transfer method (8/16/32 bit transfer). 280 * It will also set the SPI Clock Control register according to 281 * SPI slave device freq. 282 */ 283 static int davinci_spi_setup_transfer(struct spi_device *spi, 284 struct spi_transfer *t) 285 { 286 287 struct davinci_spi *dspi; 288 struct davinci_spi_config *spicfg; 289 u8 bits_per_word = 0; 290 u32 hz = 0, spifmt = 0; 291 int prescale; 292 293 dspi = spi_master_get_devdata(spi->master); 294 spicfg = spi->controller_data; 295 if (!spicfg) 296 spicfg = &davinci_spi_default_cfg; 297 298 if (t) { 299 bits_per_word = t->bits_per_word; 300 hz = t->speed_hz; 301 } 302 303 /* if bits_per_word is not set then set it default */ 304 if (!bits_per_word) 305 bits_per_word = spi->bits_per_word; 306 307 /* 308 * Assign function pointer to appropriate transfer method 309 * 8bit, 16bit or 32bit transfer 310 */ 311 if (bits_per_word <= 8) { 312 dspi->get_rx = davinci_spi_rx_buf_u8; 313 dspi->get_tx = davinci_spi_tx_buf_u8; 314 dspi->bytes_per_word[spi->chip_select] = 1; 315 } else { 316 dspi->get_rx = davinci_spi_rx_buf_u16; 317 dspi->get_tx = davinci_spi_tx_buf_u16; 318 dspi->bytes_per_word[spi->chip_select] = 2; 319 } 320 321 if (!hz) 322 hz = spi->max_speed_hz; 323 324 /* Set up SPIFMTn register, unique to this chipselect. */ 325 326 prescale = davinci_spi_get_prescale(dspi, hz); 327 if (prescale < 0) 328 return prescale; 329 330 spifmt = (prescale << SPIFMT_PRESCALE_SHIFT) | (bits_per_word & 0x1f); 331 332 if (spi->mode & SPI_LSB_FIRST) 333 spifmt |= SPIFMT_SHIFTDIR_MASK; 334 335 if (spi->mode & SPI_CPOL) 336 spifmt |= SPIFMT_POLARITY_MASK; 337 338 if (!(spi->mode & SPI_CPHA)) 339 spifmt |= SPIFMT_PHASE_MASK; 340 341 /* 342 * Assume wdelay is used only on SPI peripherals that has this field 343 * in SPIFMTn register and when it's configured from board file or DT. 344 */ 345 if (spicfg->wdelay) 346 spifmt |= ((spicfg->wdelay << SPIFMT_WDELAY_SHIFT) 347 & SPIFMT_WDELAY_MASK); 348 349 /* 350 * Version 1 hardware supports two basic SPI modes: 351 * - Standard SPI mode uses 4 pins, with chipselect 352 * - 3 pin SPI is a 4 pin variant without CS (SPI_NO_CS) 353 * (distinct from SPI_3WIRE, with just one data wire; 354 * or similar variants without MOSI or without MISO) 355 * 356 * Version 2 hardware supports an optional handshaking signal, 357 * so it can support two more modes: 358 * - 5 pin SPI variant is standard SPI plus SPI_READY 359 * - 4 pin with enable is (SPI_READY | SPI_NO_CS) 360 */ 361 362 if (dspi->version == SPI_VERSION_2) { 363 364 u32 delay = 0; 365 366 if (spicfg->odd_parity) 367 spifmt |= SPIFMT_ODD_PARITY_MASK; 368 369 if (spicfg->parity_enable) 370 spifmt |= SPIFMT_PARITYENA_MASK; 371 372 if (spicfg->timer_disable) { 373 spifmt |= SPIFMT_DISTIMER_MASK; 374 } else { 375 delay |= (spicfg->c2tdelay << SPIDELAY_C2TDELAY_SHIFT) 376 & SPIDELAY_C2TDELAY_MASK; 377 delay |= (spicfg->t2cdelay << SPIDELAY_T2CDELAY_SHIFT) 378 & SPIDELAY_T2CDELAY_MASK; 379 } 380 381 if (spi->mode & SPI_READY) { 382 spifmt |= SPIFMT_WAITENA_MASK; 383 delay |= (spicfg->t2edelay << SPIDELAY_T2EDELAY_SHIFT) 384 & SPIDELAY_T2EDELAY_MASK; 385 delay |= (spicfg->c2edelay << SPIDELAY_C2EDELAY_SHIFT) 386 & SPIDELAY_C2EDELAY_MASK; 387 } 388 389 iowrite32(delay, dspi->base + SPIDELAY); 390 } 391 392 iowrite32(spifmt, dspi->base + SPIFMT0); 393 394 return 0; 395 } 396 397 static int davinci_spi_of_setup(struct spi_device *spi) 398 { 399 struct davinci_spi_config *spicfg = spi->controller_data; 400 struct device_node *np = spi->dev.of_node; 401 u32 prop; 402 403 if (spicfg == NULL && np) { 404 spicfg = kzalloc(sizeof(*spicfg), GFP_KERNEL); 405 if (!spicfg) 406 return -ENOMEM; 407 *spicfg = davinci_spi_default_cfg; 408 /* override with dt configured values */ 409 if (!of_property_read_u32(np, "ti,spi-wdelay", &prop)) 410 spicfg->wdelay = (u8)prop; 411 spi->controller_data = spicfg; 412 } 413 414 return 0; 415 } 416 417 /** 418 * davinci_spi_setup - This functions will set default transfer method 419 * @spi: spi device on which data transfer to be done 420 * 421 * This functions sets the default transfer method. 422 */ 423 static int davinci_spi_setup(struct spi_device *spi) 424 { 425 int retval = 0; 426 struct davinci_spi *dspi; 427 struct davinci_spi_platform_data *pdata; 428 struct spi_master *master = spi->master; 429 struct device_node *np = spi->dev.of_node; 430 bool internal_cs = true; 431 432 dspi = spi_master_get_devdata(spi->master); 433 pdata = &dspi->pdata; 434 435 if (!(spi->mode & SPI_NO_CS)) { 436 if (np && (master->cs_gpios != NULL) && (spi->cs_gpio >= 0)) { 437 retval = gpio_direction_output( 438 spi->cs_gpio, !(spi->mode & SPI_CS_HIGH)); 439 internal_cs = false; 440 } else if (pdata->chip_sel && 441 spi->chip_select < pdata->num_chipselect && 442 pdata->chip_sel[spi->chip_select] != SPI_INTERN_CS) { 443 spi->cs_gpio = pdata->chip_sel[spi->chip_select]; 444 retval = gpio_direction_output( 445 spi->cs_gpio, !(spi->mode & SPI_CS_HIGH)); 446 internal_cs = false; 447 } 448 449 if (retval) { 450 dev_err(&spi->dev, "GPIO %d setup failed (%d)\n", 451 spi->cs_gpio, retval); 452 return retval; 453 } 454 455 if (internal_cs) 456 set_io_bits(dspi->base + SPIPC0, 1 << spi->chip_select); 457 } 458 459 if (spi->mode & SPI_READY) 460 set_io_bits(dspi->base + SPIPC0, SPIPC0_SPIENA_MASK); 461 462 if (spi->mode & SPI_LOOP) 463 set_io_bits(dspi->base + SPIGCR1, SPIGCR1_LOOPBACK_MASK); 464 else 465 clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_LOOPBACK_MASK); 466 467 return davinci_spi_of_setup(spi); 468 } 469 470 static void davinci_spi_cleanup(struct spi_device *spi) 471 { 472 struct davinci_spi_config *spicfg = spi->controller_data; 473 474 spi->controller_data = NULL; 475 if (spi->dev.of_node) 476 kfree(spicfg); 477 } 478 479 static int davinci_spi_check_error(struct davinci_spi *dspi, int int_status) 480 { 481 struct device *sdev = dspi->bitbang.master->dev.parent; 482 483 if (int_status & SPIFLG_TIMEOUT_MASK) { 484 dev_dbg(sdev, "SPI Time-out Error\n"); 485 return -ETIMEDOUT; 486 } 487 if (int_status & SPIFLG_DESYNC_MASK) { 488 dev_dbg(sdev, "SPI Desynchronization Error\n"); 489 return -EIO; 490 } 491 if (int_status & SPIFLG_BITERR_MASK) { 492 dev_dbg(sdev, "SPI Bit error\n"); 493 return -EIO; 494 } 495 496 if (dspi->version == SPI_VERSION_2) { 497 if (int_status & SPIFLG_DLEN_ERR_MASK) { 498 dev_dbg(sdev, "SPI Data Length Error\n"); 499 return -EIO; 500 } 501 if (int_status & SPIFLG_PARERR_MASK) { 502 dev_dbg(sdev, "SPI Parity Error\n"); 503 return -EIO; 504 } 505 if (int_status & SPIFLG_OVRRUN_MASK) { 506 dev_dbg(sdev, "SPI Data Overrun error\n"); 507 return -EIO; 508 } 509 if (int_status & SPIFLG_BUF_INIT_ACTIVE_MASK) { 510 dev_dbg(sdev, "SPI Buffer Init Active\n"); 511 return -EBUSY; 512 } 513 } 514 515 return 0; 516 } 517 518 /** 519 * davinci_spi_process_events - check for and handle any SPI controller events 520 * @dspi: the controller data 521 * 522 * This function will check the SPIFLG register and handle any events that are 523 * detected there 524 */ 525 static int davinci_spi_process_events(struct davinci_spi *dspi) 526 { 527 u32 buf, status, errors = 0, spidat1; 528 529 buf = ioread32(dspi->base + SPIBUF); 530 531 if (dspi->rcount > 0 && !(buf & SPIBUF_RXEMPTY_MASK)) { 532 dspi->get_rx(buf & 0xFFFF, dspi); 533 dspi->rcount--; 534 } 535 536 status = ioread32(dspi->base + SPIFLG); 537 538 if (unlikely(status & SPIFLG_ERROR_MASK)) { 539 errors = status & SPIFLG_ERROR_MASK; 540 goto out; 541 } 542 543 if (dspi->wcount > 0 && !(buf & SPIBUF_TXFULL_MASK)) { 544 spidat1 = ioread32(dspi->base + SPIDAT1); 545 dspi->wcount--; 546 spidat1 &= ~0xFFFF; 547 spidat1 |= 0xFFFF & dspi->get_tx(dspi); 548 iowrite32(spidat1, dspi->base + SPIDAT1); 549 } 550 551 out: 552 return errors; 553 } 554 555 static void davinci_spi_dma_rx_callback(void *data) 556 { 557 struct davinci_spi *dspi = (struct davinci_spi *)data; 558 559 dspi->rcount = 0; 560 561 if (!dspi->wcount && !dspi->rcount) 562 complete(&dspi->done); 563 } 564 565 static void davinci_spi_dma_tx_callback(void *data) 566 { 567 struct davinci_spi *dspi = (struct davinci_spi *)data; 568 569 dspi->wcount = 0; 570 571 if (!dspi->wcount && !dspi->rcount) 572 complete(&dspi->done); 573 } 574 575 /** 576 * davinci_spi_bufs - functions which will handle transfer data 577 * @spi: spi device on which data transfer to be done 578 * @t: spi transfer in which transfer info is filled 579 * 580 * This function will put data to be transferred into data register 581 * of SPI controller and then wait until the completion will be marked 582 * by the IRQ Handler. 583 */ 584 static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t) 585 { 586 struct davinci_spi *dspi; 587 int data_type, ret = -ENOMEM; 588 u32 tx_data, spidat1; 589 u32 errors = 0; 590 struct davinci_spi_config *spicfg; 591 struct davinci_spi_platform_data *pdata; 592 unsigned uninitialized_var(rx_buf_count); 593 void *dummy_buf = NULL; 594 struct scatterlist sg_rx, sg_tx; 595 596 dspi = spi_master_get_devdata(spi->master); 597 pdata = &dspi->pdata; 598 spicfg = (struct davinci_spi_config *)spi->controller_data; 599 if (!spicfg) 600 spicfg = &davinci_spi_default_cfg; 601 602 /* convert len to words based on bits_per_word */ 603 data_type = dspi->bytes_per_word[spi->chip_select]; 604 605 dspi->tx = t->tx_buf; 606 dspi->rx = t->rx_buf; 607 dspi->wcount = t->len / data_type; 608 dspi->rcount = dspi->wcount; 609 610 spidat1 = ioread32(dspi->base + SPIDAT1); 611 612 clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_POWERDOWN_MASK); 613 set_io_bits(dspi->base + SPIGCR1, SPIGCR1_SPIENA_MASK); 614 615 reinit_completion(&dspi->done); 616 617 if (spicfg->io_type == SPI_IO_TYPE_INTR) 618 set_io_bits(dspi->base + SPIINT, SPIINT_MASKINT); 619 620 if (spicfg->io_type != SPI_IO_TYPE_DMA) { 621 /* start the transfer */ 622 dspi->wcount--; 623 tx_data = dspi->get_tx(dspi); 624 spidat1 &= 0xFFFF0000; 625 spidat1 |= tx_data & 0xFFFF; 626 iowrite32(spidat1, dspi->base + SPIDAT1); 627 } else { 628 struct dma_slave_config dma_rx_conf = { 629 .direction = DMA_DEV_TO_MEM, 630 .src_addr = (unsigned long)dspi->pbase + SPIBUF, 631 .src_addr_width = data_type, 632 .src_maxburst = 1, 633 }; 634 struct dma_slave_config dma_tx_conf = { 635 .direction = DMA_MEM_TO_DEV, 636 .dst_addr = (unsigned long)dspi->pbase + SPIDAT1, 637 .dst_addr_width = data_type, 638 .dst_maxburst = 1, 639 }; 640 struct dma_async_tx_descriptor *rxdesc; 641 struct dma_async_tx_descriptor *txdesc; 642 void *buf; 643 644 dummy_buf = kzalloc(t->len, GFP_KERNEL); 645 if (!dummy_buf) 646 goto err_alloc_dummy_buf; 647 648 dmaengine_slave_config(dspi->dma_rx, &dma_rx_conf); 649 dmaengine_slave_config(dspi->dma_tx, &dma_tx_conf); 650 651 sg_init_table(&sg_rx, 1); 652 if (!t->rx_buf) 653 buf = dummy_buf; 654 else 655 buf = t->rx_buf; 656 t->rx_dma = dma_map_single(&spi->dev, buf, 657 t->len, DMA_FROM_DEVICE); 658 if (!t->rx_dma) { 659 ret = -EFAULT; 660 goto err_rx_map; 661 } 662 sg_dma_address(&sg_rx) = t->rx_dma; 663 sg_dma_len(&sg_rx) = t->len; 664 665 sg_init_table(&sg_tx, 1); 666 if (!t->tx_buf) 667 buf = dummy_buf; 668 else 669 buf = (void *)t->tx_buf; 670 t->tx_dma = dma_map_single(&spi->dev, buf, 671 t->len, DMA_TO_DEVICE); 672 if (!t->tx_dma) { 673 ret = -EFAULT; 674 goto err_tx_map; 675 } 676 sg_dma_address(&sg_tx) = t->tx_dma; 677 sg_dma_len(&sg_tx) = t->len; 678 679 rxdesc = dmaengine_prep_slave_sg(dspi->dma_rx, 680 &sg_rx, 1, DMA_DEV_TO_MEM, 681 DMA_PREP_INTERRUPT | DMA_CTRL_ACK); 682 if (!rxdesc) 683 goto err_desc; 684 685 txdesc = dmaengine_prep_slave_sg(dspi->dma_tx, 686 &sg_tx, 1, DMA_MEM_TO_DEV, 687 DMA_PREP_INTERRUPT | DMA_CTRL_ACK); 688 if (!txdesc) 689 goto err_desc; 690 691 rxdesc->callback = davinci_spi_dma_rx_callback; 692 rxdesc->callback_param = (void *)dspi; 693 txdesc->callback = davinci_spi_dma_tx_callback; 694 txdesc->callback_param = (void *)dspi; 695 696 if (pdata->cshold_bug) 697 iowrite16(spidat1 >> 16, dspi->base + SPIDAT1 + 2); 698 699 dmaengine_submit(rxdesc); 700 dmaengine_submit(txdesc); 701 702 dma_async_issue_pending(dspi->dma_rx); 703 dma_async_issue_pending(dspi->dma_tx); 704 705 set_io_bits(dspi->base + SPIINT, SPIINT_DMA_REQ_EN); 706 } 707 708 /* Wait for the transfer to complete */ 709 if (spicfg->io_type != SPI_IO_TYPE_POLL) { 710 wait_for_completion_interruptible(&(dspi->done)); 711 } else { 712 while (dspi->rcount > 0 || dspi->wcount > 0) { 713 errors = davinci_spi_process_events(dspi); 714 if (errors) 715 break; 716 cpu_relax(); 717 } 718 } 719 720 clear_io_bits(dspi->base + SPIINT, SPIINT_MASKALL); 721 if (spicfg->io_type == SPI_IO_TYPE_DMA) { 722 clear_io_bits(dspi->base + SPIINT, SPIINT_DMA_REQ_EN); 723 724 dma_unmap_single(&spi->dev, t->rx_dma, 725 t->len, DMA_FROM_DEVICE); 726 dma_unmap_single(&spi->dev, t->tx_dma, 727 t->len, DMA_TO_DEVICE); 728 kfree(dummy_buf); 729 } 730 731 clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_SPIENA_MASK); 732 set_io_bits(dspi->base + SPIGCR1, SPIGCR1_POWERDOWN_MASK); 733 734 /* 735 * Check for bit error, desync error,parity error,timeout error and 736 * receive overflow errors 737 */ 738 if (errors) { 739 ret = davinci_spi_check_error(dspi, errors); 740 WARN(!ret, "%s: error reported but no error found!\n", 741 dev_name(&spi->dev)); 742 return ret; 743 } 744 745 if (dspi->rcount != 0 || dspi->wcount != 0) { 746 dev_err(&spi->dev, "SPI data transfer error\n"); 747 return -EIO; 748 } 749 750 return t->len; 751 752 err_desc: 753 dma_unmap_single(&spi->dev, t->tx_dma, t->len, DMA_TO_DEVICE); 754 err_tx_map: 755 dma_unmap_single(&spi->dev, t->rx_dma, t->len, DMA_FROM_DEVICE); 756 err_rx_map: 757 kfree(dummy_buf); 758 err_alloc_dummy_buf: 759 return ret; 760 } 761 762 /** 763 * dummy_thread_fn - dummy thread function 764 * @irq: IRQ number for this SPI Master 765 * @context_data: structure for SPI Master controller davinci_spi 766 * 767 * This is to satisfy the request_threaded_irq() API so that the irq 768 * handler is called in interrupt context. 769 */ 770 static irqreturn_t dummy_thread_fn(s32 irq, void *data) 771 { 772 return IRQ_HANDLED; 773 } 774 775 /** 776 * davinci_spi_irq - Interrupt handler for SPI Master Controller 777 * @irq: IRQ number for this SPI Master 778 * @context_data: structure for SPI Master controller davinci_spi 779 * 780 * ISR will determine that interrupt arrives either for READ or WRITE command. 781 * According to command it will do the appropriate action. It will check 782 * transfer length and if it is not zero then dispatch transfer command again. 783 * If transfer length is zero then it will indicate the COMPLETION so that 784 * davinci_spi_bufs function can go ahead. 785 */ 786 static irqreturn_t davinci_spi_irq(s32 irq, void *data) 787 { 788 struct davinci_spi *dspi = data; 789 int status; 790 791 status = davinci_spi_process_events(dspi); 792 if (unlikely(status != 0)) 793 clear_io_bits(dspi->base + SPIINT, SPIINT_MASKINT); 794 795 if ((!dspi->rcount && !dspi->wcount) || status) 796 complete(&dspi->done); 797 798 return IRQ_HANDLED; 799 } 800 801 static int davinci_spi_request_dma(struct davinci_spi *dspi) 802 { 803 dma_cap_mask_t mask; 804 struct device *sdev = dspi->bitbang.master->dev.parent; 805 int r; 806 807 dma_cap_zero(mask); 808 dma_cap_set(DMA_SLAVE, mask); 809 810 dspi->dma_rx = dma_request_channel(mask, edma_filter_fn, 811 &dspi->dma_rx_chnum); 812 if (!dspi->dma_rx) { 813 dev_err(sdev, "request RX DMA channel failed\n"); 814 r = -ENODEV; 815 goto rx_dma_failed; 816 } 817 818 dspi->dma_tx = dma_request_channel(mask, edma_filter_fn, 819 &dspi->dma_tx_chnum); 820 if (!dspi->dma_tx) { 821 dev_err(sdev, "request TX DMA channel failed\n"); 822 r = -ENODEV; 823 goto tx_dma_failed; 824 } 825 826 return 0; 827 828 tx_dma_failed: 829 dma_release_channel(dspi->dma_rx); 830 rx_dma_failed: 831 return r; 832 } 833 834 #if defined(CONFIG_OF) 835 static const struct of_device_id davinci_spi_of_match[] = { 836 { 837 .compatible = "ti,dm6441-spi", 838 }, 839 { 840 .compatible = "ti,da830-spi", 841 .data = (void *)SPI_VERSION_2, 842 }, 843 { }, 844 }; 845 MODULE_DEVICE_TABLE(of, davinci_spi_of_match); 846 847 /** 848 * spi_davinci_get_pdata - Get platform data from DTS binding 849 * @pdev: ptr to platform data 850 * @dspi: ptr to driver data 851 * 852 * Parses and populates pdata in dspi from device tree bindings. 853 * 854 * NOTE: Not all platform data params are supported currently. 855 */ 856 static int spi_davinci_get_pdata(struct platform_device *pdev, 857 struct davinci_spi *dspi) 858 { 859 struct device_node *node = pdev->dev.of_node; 860 struct davinci_spi_platform_data *pdata; 861 unsigned int num_cs, intr_line = 0; 862 const struct of_device_id *match; 863 864 pdata = &dspi->pdata; 865 866 pdata->version = SPI_VERSION_1; 867 match = of_match_device(davinci_spi_of_match, &pdev->dev); 868 if (!match) 869 return -ENODEV; 870 871 /* match data has the SPI version number for SPI_VERSION_2 */ 872 if (match->data == (void *)SPI_VERSION_2) 873 pdata->version = SPI_VERSION_2; 874 875 /* 876 * default num_cs is 1 and all chipsel are internal to the chip 877 * indicated by chip_sel being NULL or cs_gpios being NULL or 878 * set to -ENOENT. num-cs includes internal as well as gpios. 879 * indicated by chip_sel being NULL. GPIO based CS is not 880 * supported yet in DT bindings. 881 */ 882 num_cs = 1; 883 of_property_read_u32(node, "num-cs", &num_cs); 884 pdata->num_chipselect = num_cs; 885 of_property_read_u32(node, "ti,davinci-spi-intr-line", &intr_line); 886 pdata->intr_line = intr_line; 887 return 0; 888 } 889 #else 890 static struct davinci_spi_platform_data 891 *spi_davinci_get_pdata(struct platform_device *pdev, 892 struct davinci_spi *dspi) 893 { 894 return -ENODEV; 895 } 896 #endif 897 898 /** 899 * davinci_spi_probe - probe function for SPI Master Controller 900 * @pdev: platform_device structure which contains plateform specific data 901 * 902 * According to Linux Device Model this function will be invoked by Linux 903 * with platform_device struct which contains the device specific info. 904 * This function will map the SPI controller's memory, register IRQ, 905 * Reset SPI controller and setting its registers to default value. 906 * It will invoke spi_bitbang_start to create work queue so that client driver 907 * can register transfer method to work queue. 908 */ 909 static int davinci_spi_probe(struct platform_device *pdev) 910 { 911 struct spi_master *master; 912 struct davinci_spi *dspi; 913 struct davinci_spi_platform_data *pdata; 914 struct resource *r; 915 resource_size_t dma_rx_chan = SPI_NO_RESOURCE; 916 resource_size_t dma_tx_chan = SPI_NO_RESOURCE; 917 int ret = 0; 918 u32 spipc0; 919 920 master = spi_alloc_master(&pdev->dev, sizeof(struct davinci_spi)); 921 if (master == NULL) { 922 ret = -ENOMEM; 923 goto err; 924 } 925 926 platform_set_drvdata(pdev, master); 927 928 dspi = spi_master_get_devdata(master); 929 930 if (dev_get_platdata(&pdev->dev)) { 931 pdata = dev_get_platdata(&pdev->dev); 932 dspi->pdata = *pdata; 933 } else { 934 /* update dspi pdata with that from the DT */ 935 ret = spi_davinci_get_pdata(pdev, dspi); 936 if (ret < 0) 937 goto free_master; 938 } 939 940 /* pdata in dspi is now updated and point pdata to that */ 941 pdata = &dspi->pdata; 942 943 dspi->bytes_per_word = devm_kzalloc(&pdev->dev, 944 sizeof(*dspi->bytes_per_word) * 945 pdata->num_chipselect, GFP_KERNEL); 946 if (dspi->bytes_per_word == NULL) { 947 ret = -ENOMEM; 948 goto free_master; 949 } 950 951 r = platform_get_resource(pdev, IORESOURCE_MEM, 0); 952 if (r == NULL) { 953 ret = -ENOENT; 954 goto free_master; 955 } 956 957 dspi->pbase = r->start; 958 959 dspi->base = devm_ioremap_resource(&pdev->dev, r); 960 if (IS_ERR(dspi->base)) { 961 ret = PTR_ERR(dspi->base); 962 goto free_master; 963 } 964 965 dspi->irq = platform_get_irq(pdev, 0); 966 if (dspi->irq <= 0) { 967 ret = -EINVAL; 968 goto free_master; 969 } 970 971 ret = devm_request_threaded_irq(&pdev->dev, dspi->irq, davinci_spi_irq, 972 dummy_thread_fn, 0, dev_name(&pdev->dev), dspi); 973 if (ret) 974 goto free_master; 975 976 dspi->bitbang.master = master; 977 978 dspi->clk = devm_clk_get(&pdev->dev, NULL); 979 if (IS_ERR(dspi->clk)) { 980 ret = -ENODEV; 981 goto free_master; 982 } 983 clk_prepare_enable(dspi->clk); 984 985 master->dev.of_node = pdev->dev.of_node; 986 master->bus_num = pdev->id; 987 master->num_chipselect = pdata->num_chipselect; 988 master->bits_per_word_mask = SPI_BPW_RANGE_MASK(2, 16); 989 master->setup = davinci_spi_setup; 990 master->cleanup = davinci_spi_cleanup; 991 992 dspi->bitbang.chipselect = davinci_spi_chipselect; 993 dspi->bitbang.setup_transfer = davinci_spi_setup_transfer; 994 995 dspi->version = pdata->version; 996 997 dspi->bitbang.flags = SPI_NO_CS | SPI_LSB_FIRST | SPI_LOOP; 998 if (dspi->version == SPI_VERSION_2) 999 dspi->bitbang.flags |= SPI_READY; 1000 1001 if (pdev->dev.of_node) { 1002 int i; 1003 1004 for (i = 0; i < pdata->num_chipselect; i++) { 1005 int cs_gpio = of_get_named_gpio(pdev->dev.of_node, 1006 "cs-gpios", i); 1007 1008 if (cs_gpio == -EPROBE_DEFER) { 1009 ret = cs_gpio; 1010 goto free_clk; 1011 } 1012 1013 if (gpio_is_valid(cs_gpio)) { 1014 ret = devm_gpio_request(&pdev->dev, cs_gpio, 1015 dev_name(&pdev->dev)); 1016 if (ret) 1017 goto free_clk; 1018 } 1019 } 1020 } 1021 1022 r = platform_get_resource(pdev, IORESOURCE_DMA, 0); 1023 if (r) 1024 dma_rx_chan = r->start; 1025 r = platform_get_resource(pdev, IORESOURCE_DMA, 1); 1026 if (r) 1027 dma_tx_chan = r->start; 1028 1029 dspi->bitbang.txrx_bufs = davinci_spi_bufs; 1030 if (dma_rx_chan != SPI_NO_RESOURCE && 1031 dma_tx_chan != SPI_NO_RESOURCE) { 1032 dspi->dma_rx_chnum = dma_rx_chan; 1033 dspi->dma_tx_chnum = dma_tx_chan; 1034 1035 ret = davinci_spi_request_dma(dspi); 1036 if (ret) 1037 goto free_clk; 1038 1039 dev_info(&pdev->dev, "DMA: supported\n"); 1040 dev_info(&pdev->dev, "DMA: RX channel: %pa, TX channel: %pa, event queue: %d\n", 1041 &dma_rx_chan, &dma_tx_chan, 1042 pdata->dma_event_q); 1043 } 1044 1045 dspi->get_rx = davinci_spi_rx_buf_u8; 1046 dspi->get_tx = davinci_spi_tx_buf_u8; 1047 1048 init_completion(&dspi->done); 1049 1050 /* Reset In/OUT SPI module */ 1051 iowrite32(0, dspi->base + SPIGCR0); 1052 udelay(100); 1053 iowrite32(1, dspi->base + SPIGCR0); 1054 1055 /* Set up SPIPC0. CS and ENA init is done in davinci_spi_setup */ 1056 spipc0 = SPIPC0_DIFUN_MASK | SPIPC0_DOFUN_MASK | SPIPC0_CLKFUN_MASK; 1057 iowrite32(spipc0, dspi->base + SPIPC0); 1058 1059 if (pdata->intr_line) 1060 iowrite32(SPI_INTLVL_1, dspi->base + SPILVL); 1061 else 1062 iowrite32(SPI_INTLVL_0, dspi->base + SPILVL); 1063 1064 iowrite32(CS_DEFAULT, dspi->base + SPIDEF); 1065 1066 /* master mode default */ 1067 set_io_bits(dspi->base + SPIGCR1, SPIGCR1_CLKMOD_MASK); 1068 set_io_bits(dspi->base + SPIGCR1, SPIGCR1_MASTER_MASK); 1069 set_io_bits(dspi->base + SPIGCR1, SPIGCR1_POWERDOWN_MASK); 1070 1071 ret = spi_bitbang_start(&dspi->bitbang); 1072 if (ret) 1073 goto free_dma; 1074 1075 dev_info(&pdev->dev, "Controller at 0x%p\n", dspi->base); 1076 1077 return ret; 1078 1079 free_dma: 1080 dma_release_channel(dspi->dma_rx); 1081 dma_release_channel(dspi->dma_tx); 1082 free_clk: 1083 clk_disable_unprepare(dspi->clk); 1084 free_master: 1085 spi_master_put(master); 1086 err: 1087 return ret; 1088 } 1089 1090 /** 1091 * davinci_spi_remove - remove function for SPI Master Controller 1092 * @pdev: platform_device structure which contains plateform specific data 1093 * 1094 * This function will do the reverse action of davinci_spi_probe function 1095 * It will free the IRQ and SPI controller's memory region. 1096 * It will also call spi_bitbang_stop to destroy the work queue which was 1097 * created by spi_bitbang_start. 1098 */ 1099 static int davinci_spi_remove(struct platform_device *pdev) 1100 { 1101 struct davinci_spi *dspi; 1102 struct spi_master *master; 1103 1104 master = platform_get_drvdata(pdev); 1105 dspi = spi_master_get_devdata(master); 1106 1107 spi_bitbang_stop(&dspi->bitbang); 1108 1109 clk_disable_unprepare(dspi->clk); 1110 spi_master_put(master); 1111 1112 return 0; 1113 } 1114 1115 static struct platform_driver davinci_spi_driver = { 1116 .driver = { 1117 .name = "spi_davinci", 1118 .of_match_table = of_match_ptr(davinci_spi_of_match), 1119 }, 1120 .probe = davinci_spi_probe, 1121 .remove = davinci_spi_remove, 1122 }; 1123 module_platform_driver(davinci_spi_driver); 1124 1125 MODULE_DESCRIPTION("TI DaVinci SPI Master Controller Driver"); 1126 MODULE_LICENSE("GPL"); 1127