xref: /openbmc/linux/drivers/spi/spi-clps711x.c (revision 5a1ea477)
1 /*
2  *  CLPS711X SPI bus driver
3  *
4  *  Copyright (C) 2012-2016 Alexander Shiyan <shc_work@mail.ru>
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License as published by
8  * the Free Software Foundation; either version 2 of the License, or
9  * (at your option) any later version.
10  */
11 
12 #include <linux/io.h>
13 #include <linux/clk.h>
14 #include <linux/gpio/consumer.h>
15 #include <linux/module.h>
16 #include <linux/interrupt.h>
17 #include <linux/platform_device.h>
18 #include <linux/regmap.h>
19 #include <linux/mfd/syscon.h>
20 #include <linux/mfd/syscon/clps711x.h>
21 #include <linux/spi/spi.h>
22 
23 #define DRIVER_NAME		"clps711x-spi"
24 
25 #define SYNCIO_FRMLEN(x)	((x) << 8)
26 #define SYNCIO_TXFRMEN		(1 << 14)
27 
28 struct spi_clps711x_data {
29 	void __iomem		*syncio;
30 	struct regmap		*syscon;
31 	struct clk		*spi_clk;
32 
33 	u8			*tx_buf;
34 	u8			*rx_buf;
35 	unsigned int		bpw;
36 	int			len;
37 };
38 
39 static int spi_clps711x_prepare_message(struct spi_master *master,
40 					struct spi_message *msg)
41 {
42 	struct spi_clps711x_data *hw = spi_master_get_devdata(master);
43 	struct spi_device *spi = msg->spi;
44 
45 	/* Setup mode for transfer */
46 	return regmap_update_bits(hw->syscon, SYSCON_OFFSET, SYSCON3_ADCCKNSEN,
47 				  (spi->mode & SPI_CPHA) ?
48 				  SYSCON3_ADCCKNSEN : 0);
49 }
50 
51 static int spi_clps711x_transfer_one(struct spi_master *master,
52 				     struct spi_device *spi,
53 				     struct spi_transfer *xfer)
54 {
55 	struct spi_clps711x_data *hw = spi_master_get_devdata(master);
56 	u8 data;
57 
58 	clk_set_rate(hw->spi_clk, xfer->speed_hz ? : spi->max_speed_hz);
59 
60 	hw->len = xfer->len;
61 	hw->bpw = xfer->bits_per_word;
62 	hw->tx_buf = (u8 *)xfer->tx_buf;
63 	hw->rx_buf = (u8 *)xfer->rx_buf;
64 
65 	/* Initiate transfer */
66 	data = hw->tx_buf ? *hw->tx_buf++ : 0;
67 	writel(data | SYNCIO_FRMLEN(hw->bpw) | SYNCIO_TXFRMEN, hw->syncio);
68 
69 	return 1;
70 }
71 
72 static irqreturn_t spi_clps711x_isr(int irq, void *dev_id)
73 {
74 	struct spi_master *master = dev_id;
75 	struct spi_clps711x_data *hw = spi_master_get_devdata(master);
76 	u8 data;
77 
78 	/* Handle RX */
79 	data = readb(hw->syncio);
80 	if (hw->rx_buf)
81 		*hw->rx_buf++ = data;
82 
83 	/* Handle TX */
84 	if (--hw->len > 0) {
85 		data = hw->tx_buf ? *hw->tx_buf++ : 0;
86 		writel(data | SYNCIO_FRMLEN(hw->bpw) | SYNCIO_TXFRMEN,
87 		       hw->syncio);
88 	} else
89 		spi_finalize_current_transfer(master);
90 
91 	return IRQ_HANDLED;
92 }
93 
94 static int spi_clps711x_probe(struct platform_device *pdev)
95 {
96 	struct spi_clps711x_data *hw;
97 	struct spi_master *master;
98 	struct resource *res;
99 	int irq, ret;
100 
101 	irq = platform_get_irq(pdev, 0);
102 	if (irq < 0)
103 		return irq;
104 
105 	master = spi_alloc_master(&pdev->dev, sizeof(*hw));
106 	if (!master)
107 		return -ENOMEM;
108 
109 	master->use_gpio_descriptors = true;
110 	master->bus_num = -1;
111 	master->mode_bits = SPI_CPHA | SPI_CS_HIGH;
112 	master->bits_per_word_mask =  SPI_BPW_RANGE_MASK(1, 8);
113 	master->dev.of_node = pdev->dev.of_node;
114 	master->prepare_message = spi_clps711x_prepare_message;
115 	master->transfer_one = spi_clps711x_transfer_one;
116 
117 	hw = spi_master_get_devdata(master);
118 
119 	hw->spi_clk = devm_clk_get(&pdev->dev, NULL);
120 	if (IS_ERR(hw->spi_clk)) {
121 		ret = PTR_ERR(hw->spi_clk);
122 		goto err_out;
123 	}
124 
125 	hw->syscon =
126 		syscon_regmap_lookup_by_compatible("cirrus,ep7209-syscon3");
127 	if (IS_ERR(hw->syscon)) {
128 		ret = PTR_ERR(hw->syscon);
129 		goto err_out;
130 	}
131 
132 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
133 	hw->syncio = devm_ioremap_resource(&pdev->dev, res);
134 	if (IS_ERR(hw->syncio)) {
135 		ret = PTR_ERR(hw->syncio);
136 		goto err_out;
137 	}
138 
139 	/* Disable extended mode due hardware problems */
140 	regmap_update_bits(hw->syscon, SYSCON_OFFSET, SYSCON3_ADCCON, 0);
141 
142 	/* Clear possible pending interrupt */
143 	readl(hw->syncio);
144 
145 	ret = devm_request_irq(&pdev->dev, irq, spi_clps711x_isr, 0,
146 			       dev_name(&pdev->dev), master);
147 	if (ret)
148 		goto err_out;
149 
150 	ret = devm_spi_register_master(&pdev->dev, master);
151 	if (!ret)
152 		return 0;
153 
154 err_out:
155 	spi_master_put(master);
156 
157 	return ret;
158 }
159 
160 static const struct of_device_id clps711x_spi_dt_ids[] = {
161 	{ .compatible = "cirrus,ep7209-spi", },
162 	{ }
163 };
164 MODULE_DEVICE_TABLE(of, clps711x_spi_dt_ids);
165 
166 static struct platform_driver clps711x_spi_driver = {
167 	.driver	= {
168 		.name	= DRIVER_NAME,
169 		.of_match_table = clps711x_spi_dt_ids,
170 	},
171 	.probe	= spi_clps711x_probe,
172 };
173 module_platform_driver(clps711x_spi_driver);
174 
175 MODULE_LICENSE("GPL");
176 MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
177 MODULE_DESCRIPTION("CLPS711X SPI bus driver");
178 MODULE_ALIAS("platform:" DRIVER_NAME);
179