1 /* 2 * Cavium ThunderX SPI driver. 3 * 4 * Copyright (C) 2016 Cavium Inc. 5 * Authors: Jan Glauber <jglauber@cavium.com> 6 */ 7 8 #include <linux/module.h> 9 #include <linux/pci.h> 10 #include <linux/spi/spi.h> 11 12 #include "spi-cavium.h" 13 14 #define DRV_NAME "spi-thunderx" 15 16 #define SYS_FREQ_DEFAULT 700000000 /* 700 Mhz */ 17 18 static int thunderx_spi_probe(struct pci_dev *pdev, 19 const struct pci_device_id *ent) 20 { 21 struct device *dev = &pdev->dev; 22 struct spi_master *master; 23 struct octeon_spi *p; 24 int ret; 25 26 master = spi_alloc_master(dev, sizeof(struct octeon_spi)); 27 if (!master) 28 return -ENOMEM; 29 30 p = spi_master_get_devdata(master); 31 32 ret = pcim_enable_device(pdev); 33 if (ret) 34 goto error; 35 36 ret = pci_request_regions(pdev, DRV_NAME); 37 if (ret) 38 goto error; 39 40 p->register_base = pcim_iomap(pdev, 0, pci_resource_len(pdev, 0)); 41 if (!p->register_base) { 42 ret = -EINVAL; 43 goto error; 44 } 45 46 p->regs.config = 0x1000; 47 p->regs.status = 0x1008; 48 p->regs.tx = 0x1010; 49 p->regs.data = 0x1080; 50 51 p->clk = devm_clk_get(dev, NULL); 52 if (IS_ERR(p->clk)) { 53 ret = PTR_ERR(p->clk); 54 goto error; 55 } 56 57 ret = clk_prepare_enable(p->clk); 58 if (ret) 59 goto error; 60 61 p->sys_freq = clk_get_rate(p->clk); 62 if (!p->sys_freq) 63 p->sys_freq = SYS_FREQ_DEFAULT; 64 dev_info(dev, "Set system clock to %u\n", p->sys_freq); 65 66 master->num_chipselect = 4; 67 master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_CS_HIGH | 68 SPI_LSB_FIRST | SPI_3WIRE; 69 master->transfer_one_message = octeon_spi_transfer_one_message; 70 master->bits_per_word_mask = SPI_BPW_MASK(8); 71 master->max_speed_hz = OCTEON_SPI_MAX_CLOCK_HZ; 72 master->dev.of_node = pdev->dev.of_node; 73 74 pci_set_drvdata(pdev, master); 75 76 ret = devm_spi_register_master(dev, master); 77 if (ret) 78 goto error; 79 80 return 0; 81 82 error: 83 clk_disable_unprepare(p->clk); 84 spi_master_put(master); 85 return ret; 86 } 87 88 static void thunderx_spi_remove(struct pci_dev *pdev) 89 { 90 struct spi_master *master = pci_get_drvdata(pdev); 91 struct octeon_spi *p; 92 93 p = spi_master_get_devdata(master); 94 if (!p) 95 return; 96 97 clk_disable_unprepare(p->clk); 98 /* Put everything in a known state. */ 99 writeq(0, p->register_base + OCTEON_SPI_CFG(p)); 100 } 101 102 static const struct pci_device_id thunderx_spi_pci_id_table[] = { 103 { PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, 0xa00b) }, 104 { 0, } 105 }; 106 107 MODULE_DEVICE_TABLE(pci, thunderx_spi_pci_id_table); 108 109 static struct pci_driver thunderx_spi_driver = { 110 .name = DRV_NAME, 111 .id_table = thunderx_spi_pci_id_table, 112 .probe = thunderx_spi_probe, 113 .remove = thunderx_spi_remove, 114 }; 115 116 module_pci_driver(thunderx_spi_driver); 117 118 MODULE_DESCRIPTION("Cavium, Inc. ThunderX SPI bus driver"); 119 MODULE_AUTHOR("Jan Glauber"); 120 MODULE_LICENSE("GPL"); 121