1 /* 2 * Broadcom BCM63xx SPI controller support 3 * 4 * Copyright (C) 2009-2012 Florian Fainelli <florian@openwrt.org> 5 * Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com> 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License 9 * as published by the Free Software Foundation; either version 2 10 * of the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the 19 * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, 20 */ 21 22 #include <linux/kernel.h> 23 #include <linux/clk.h> 24 #include <linux/io.h> 25 #include <linux/module.h> 26 #include <linux/platform_device.h> 27 #include <linux/delay.h> 28 #include <linux/interrupt.h> 29 #include <linux/spi/spi.h> 30 #include <linux/completion.h> 31 #include <linux/err.h> 32 #include <linux/pm_runtime.h> 33 34 #include <bcm63xx_dev_spi.h> 35 36 #define BCM63XX_SPI_MAX_PREPEND 15 37 38 struct bcm63xx_spi { 39 struct completion done; 40 41 void __iomem *regs; 42 int irq; 43 44 /* Platform data */ 45 unsigned fifo_size; 46 unsigned int msg_type_shift; 47 unsigned int msg_ctl_width; 48 49 /* data iomem */ 50 u8 __iomem *tx_io; 51 const u8 __iomem *rx_io; 52 53 struct clk *clk; 54 struct platform_device *pdev; 55 }; 56 57 static inline u8 bcm_spi_readb(struct bcm63xx_spi *bs, 58 unsigned int offset) 59 { 60 return bcm_readb(bs->regs + bcm63xx_spireg(offset)); 61 } 62 63 static inline u16 bcm_spi_readw(struct bcm63xx_spi *bs, 64 unsigned int offset) 65 { 66 return bcm_readw(bs->regs + bcm63xx_spireg(offset)); 67 } 68 69 static inline void bcm_spi_writeb(struct bcm63xx_spi *bs, 70 u8 value, unsigned int offset) 71 { 72 bcm_writeb(value, bs->regs + bcm63xx_spireg(offset)); 73 } 74 75 static inline void bcm_spi_writew(struct bcm63xx_spi *bs, 76 u16 value, unsigned int offset) 77 { 78 bcm_writew(value, bs->regs + bcm63xx_spireg(offset)); 79 } 80 81 static const unsigned bcm63xx_spi_freq_table[SPI_CLK_MASK][2] = { 82 { 20000000, SPI_CLK_20MHZ }, 83 { 12500000, SPI_CLK_12_50MHZ }, 84 { 6250000, SPI_CLK_6_250MHZ }, 85 { 3125000, SPI_CLK_3_125MHZ }, 86 { 1563000, SPI_CLK_1_563MHZ }, 87 { 781000, SPI_CLK_0_781MHZ }, 88 { 391000, SPI_CLK_0_391MHZ } 89 }; 90 91 static void bcm63xx_spi_setup_transfer(struct spi_device *spi, 92 struct spi_transfer *t) 93 { 94 struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master); 95 u8 clk_cfg, reg; 96 int i; 97 98 /* Find the closest clock configuration */ 99 for (i = 0; i < SPI_CLK_MASK; i++) { 100 if (t->speed_hz >= bcm63xx_spi_freq_table[i][0]) { 101 clk_cfg = bcm63xx_spi_freq_table[i][1]; 102 break; 103 } 104 } 105 106 /* No matching configuration found, default to lowest */ 107 if (i == SPI_CLK_MASK) 108 clk_cfg = SPI_CLK_0_391MHZ; 109 110 /* clear existing clock configuration bits of the register */ 111 reg = bcm_spi_readb(bs, SPI_CLK_CFG); 112 reg &= ~SPI_CLK_MASK; 113 reg |= clk_cfg; 114 115 bcm_spi_writeb(bs, reg, SPI_CLK_CFG); 116 dev_dbg(&spi->dev, "Setting clock register to %02x (hz %d)\n", 117 clk_cfg, t->speed_hz); 118 } 119 120 /* the spi->mode bits understood by this driver: */ 121 #define MODEBITS (SPI_CPOL | SPI_CPHA) 122 123 static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *first, 124 unsigned int num_transfers) 125 { 126 struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master); 127 u16 msg_ctl; 128 u16 cmd; 129 u8 rx_tail; 130 unsigned int i, timeout = 0, prepend_len = 0, len = 0; 131 struct spi_transfer *t = first; 132 bool do_rx = false; 133 bool do_tx = false; 134 135 /* Disable the CMD_DONE interrupt */ 136 bcm_spi_writeb(bs, 0, SPI_INT_MASK); 137 138 dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n", 139 t->tx_buf, t->rx_buf, t->len); 140 141 if (num_transfers > 1 && t->tx_buf && t->len <= BCM63XX_SPI_MAX_PREPEND) 142 prepend_len = t->len; 143 144 /* prepare the buffer */ 145 for (i = 0; i < num_transfers; i++) { 146 if (t->tx_buf) { 147 do_tx = true; 148 memcpy_toio(bs->tx_io + len, t->tx_buf, t->len); 149 150 /* don't prepend more than one tx */ 151 if (t != first) 152 prepend_len = 0; 153 } 154 155 if (t->rx_buf) { 156 do_rx = true; 157 /* prepend is half-duplex write only */ 158 if (t == first) 159 prepend_len = 0; 160 } 161 162 len += t->len; 163 164 t = list_entry(t->transfer_list.next, struct spi_transfer, 165 transfer_list); 166 } 167 168 reinit_completion(&bs->done); 169 170 /* Fill in the Message control register */ 171 msg_ctl = (len << SPI_BYTE_CNT_SHIFT); 172 173 if (do_rx && do_tx && prepend_len == 0) 174 msg_ctl |= (SPI_FD_RW << bs->msg_type_shift); 175 else if (do_rx) 176 msg_ctl |= (SPI_HD_R << bs->msg_type_shift); 177 else if (do_tx) 178 msg_ctl |= (SPI_HD_W << bs->msg_type_shift); 179 180 switch (bs->msg_ctl_width) { 181 case 8: 182 bcm_spi_writeb(bs, msg_ctl, SPI_MSG_CTL); 183 break; 184 case 16: 185 bcm_spi_writew(bs, msg_ctl, SPI_MSG_CTL); 186 break; 187 } 188 189 /* Issue the transfer */ 190 cmd = SPI_CMD_START_IMMEDIATE; 191 cmd |= (prepend_len << SPI_CMD_PREPEND_BYTE_CNT_SHIFT); 192 cmd |= (spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT); 193 bcm_spi_writew(bs, cmd, SPI_CMD); 194 195 /* Enable the CMD_DONE interrupt */ 196 bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK); 197 198 timeout = wait_for_completion_timeout(&bs->done, HZ); 199 if (!timeout) 200 return -ETIMEDOUT; 201 202 if (!do_rx) 203 return 0; 204 205 len = 0; 206 t = first; 207 /* Read out all the data */ 208 for (i = 0; i < num_transfers; i++) { 209 if (t->rx_buf) 210 memcpy_fromio(t->rx_buf, bs->rx_io + len, t->len); 211 212 if (t != first || prepend_len == 0) 213 len += t->len; 214 215 t = list_entry(t->transfer_list.next, struct spi_transfer, 216 transfer_list); 217 } 218 219 return 0; 220 } 221 222 static int bcm63xx_spi_transfer_one(struct spi_master *master, 223 struct spi_message *m) 224 { 225 struct bcm63xx_spi *bs = spi_master_get_devdata(master); 226 struct spi_transfer *t, *first = NULL; 227 struct spi_device *spi = m->spi; 228 int status = 0; 229 unsigned int n_transfers = 0, total_len = 0; 230 bool can_use_prepend = false; 231 232 /* 233 * This SPI controller does not support keeping CS active after a 234 * transfer. 235 * Work around this by merging as many transfers we can into one big 236 * full-duplex transfers. 237 */ 238 list_for_each_entry(t, &m->transfers, transfer_list) { 239 if (!first) 240 first = t; 241 242 n_transfers++; 243 total_len += t->len; 244 245 if (n_transfers == 2 && !first->rx_buf && !t->tx_buf && 246 first->len <= BCM63XX_SPI_MAX_PREPEND) 247 can_use_prepend = true; 248 else if (can_use_prepend && t->tx_buf) 249 can_use_prepend = false; 250 251 /* we can only transfer one fifo worth of data */ 252 if ((can_use_prepend && 253 total_len > (bs->fifo_size + BCM63XX_SPI_MAX_PREPEND)) || 254 (!can_use_prepend && total_len > bs->fifo_size)) { 255 dev_err(&spi->dev, "unable to do transfers larger than FIFO size (%i > %i)\n", 256 total_len, bs->fifo_size); 257 status = -EINVAL; 258 goto exit; 259 } 260 261 /* all combined transfers have to have the same speed */ 262 if (t->speed_hz != first->speed_hz) { 263 dev_err(&spi->dev, "unable to change speed between transfers\n"); 264 status = -EINVAL; 265 goto exit; 266 } 267 268 /* CS will be deasserted directly after transfer */ 269 if (t->delay_usecs) { 270 dev_err(&spi->dev, "unable to keep CS asserted after transfer\n"); 271 status = -EINVAL; 272 goto exit; 273 } 274 275 if (t->cs_change || 276 list_is_last(&t->transfer_list, &m->transfers)) { 277 /* configure adapter for a new transfer */ 278 bcm63xx_spi_setup_transfer(spi, first); 279 280 /* send the data */ 281 status = bcm63xx_txrx_bufs(spi, first, n_transfers); 282 if (status) 283 goto exit; 284 285 m->actual_length += total_len; 286 287 first = NULL; 288 n_transfers = 0; 289 total_len = 0; 290 can_use_prepend = false; 291 } 292 } 293 exit: 294 m->status = status; 295 spi_finalize_current_message(master); 296 297 return 0; 298 } 299 300 /* This driver supports single master mode only. Hence 301 * CMD_DONE is the only interrupt we care about 302 */ 303 static irqreturn_t bcm63xx_spi_interrupt(int irq, void *dev_id) 304 { 305 struct spi_master *master = (struct spi_master *)dev_id; 306 struct bcm63xx_spi *bs = spi_master_get_devdata(master); 307 u8 intr; 308 309 /* Read interupts and clear them immediately */ 310 intr = bcm_spi_readb(bs, SPI_INT_STATUS); 311 bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS); 312 bcm_spi_writeb(bs, 0, SPI_INT_MASK); 313 314 /* A transfer completed */ 315 if (intr & SPI_INTR_CMD_DONE) 316 complete(&bs->done); 317 318 return IRQ_HANDLED; 319 } 320 321 322 static int bcm63xx_spi_probe(struct platform_device *pdev) 323 { 324 struct resource *r; 325 struct device *dev = &pdev->dev; 326 struct bcm63xx_spi_pdata *pdata = dev_get_platdata(&pdev->dev); 327 int irq; 328 struct spi_master *master; 329 struct clk *clk; 330 struct bcm63xx_spi *bs; 331 int ret; 332 333 irq = platform_get_irq(pdev, 0); 334 if (irq < 0) { 335 dev_err(dev, "no irq\n"); 336 return -ENXIO; 337 } 338 339 clk = devm_clk_get(dev, "spi"); 340 if (IS_ERR(clk)) { 341 dev_err(dev, "no clock for device\n"); 342 return PTR_ERR(clk); 343 } 344 345 master = spi_alloc_master(dev, sizeof(*bs)); 346 if (!master) { 347 dev_err(dev, "out of memory\n"); 348 return -ENOMEM; 349 } 350 351 bs = spi_master_get_devdata(master); 352 init_completion(&bs->done); 353 354 platform_set_drvdata(pdev, master); 355 bs->pdev = pdev; 356 357 r = platform_get_resource(pdev, IORESOURCE_MEM, 0); 358 bs->regs = devm_ioremap_resource(&pdev->dev, r); 359 if (IS_ERR(bs->regs)) { 360 ret = PTR_ERR(bs->regs); 361 goto out_err; 362 } 363 364 bs->irq = irq; 365 bs->clk = clk; 366 bs->fifo_size = pdata->fifo_size; 367 368 ret = devm_request_irq(&pdev->dev, irq, bcm63xx_spi_interrupt, 0, 369 pdev->name, master); 370 if (ret) { 371 dev_err(dev, "unable to request irq\n"); 372 goto out_err; 373 } 374 375 master->bus_num = pdata->bus_num; 376 master->num_chipselect = pdata->num_chipselect; 377 master->transfer_one_message = bcm63xx_spi_transfer_one; 378 master->mode_bits = MODEBITS; 379 master->bits_per_word_mask = SPI_BPW_MASK(8); 380 master->auto_runtime_pm = true; 381 bs->msg_type_shift = pdata->msg_type_shift; 382 bs->msg_ctl_width = pdata->msg_ctl_width; 383 bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA)); 384 bs->rx_io = (const u8 *)(bs->regs + bcm63xx_spireg(SPI_RX_DATA)); 385 386 switch (bs->msg_ctl_width) { 387 case 8: 388 case 16: 389 break; 390 default: 391 dev_err(dev, "unsupported MSG_CTL width: %d\n", 392 bs->msg_ctl_width); 393 goto out_err; 394 } 395 396 /* Initialize hardware */ 397 ret = clk_prepare_enable(bs->clk); 398 if (ret) 399 goto out_err; 400 401 bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS); 402 403 /* register and we are done */ 404 ret = devm_spi_register_master(dev, master); 405 if (ret) { 406 dev_err(dev, "spi register failed\n"); 407 goto out_clk_disable; 408 } 409 410 dev_info(dev, "at 0x%08x (irq %d, FIFOs size %d)\n", 411 r->start, irq, bs->fifo_size); 412 413 return 0; 414 415 out_clk_disable: 416 clk_disable_unprepare(clk); 417 out_err: 418 spi_master_put(master); 419 return ret; 420 } 421 422 static int bcm63xx_spi_remove(struct platform_device *pdev) 423 { 424 struct spi_master *master = platform_get_drvdata(pdev); 425 struct bcm63xx_spi *bs = spi_master_get_devdata(master); 426 427 /* reset spi block */ 428 bcm_spi_writeb(bs, 0, SPI_INT_MASK); 429 430 /* HW shutdown */ 431 clk_disable_unprepare(bs->clk); 432 433 return 0; 434 } 435 436 #ifdef CONFIG_PM_SLEEP 437 static int bcm63xx_spi_suspend(struct device *dev) 438 { 439 struct spi_master *master = dev_get_drvdata(dev); 440 struct bcm63xx_spi *bs = spi_master_get_devdata(master); 441 442 spi_master_suspend(master); 443 444 clk_disable_unprepare(bs->clk); 445 446 return 0; 447 } 448 449 static int bcm63xx_spi_resume(struct device *dev) 450 { 451 struct spi_master *master = dev_get_drvdata(dev); 452 struct bcm63xx_spi *bs = spi_master_get_devdata(master); 453 int ret; 454 455 ret = clk_prepare_enable(bs->clk); 456 if (ret) 457 return ret; 458 459 spi_master_resume(master); 460 461 return 0; 462 } 463 #endif 464 465 static const struct dev_pm_ops bcm63xx_spi_pm_ops = { 466 SET_SYSTEM_SLEEP_PM_OPS(bcm63xx_spi_suspend, bcm63xx_spi_resume) 467 }; 468 469 static struct platform_driver bcm63xx_spi_driver = { 470 .driver = { 471 .name = "bcm63xx-spi", 472 .owner = THIS_MODULE, 473 .pm = &bcm63xx_spi_pm_ops, 474 }, 475 .probe = bcm63xx_spi_probe, 476 .remove = bcm63xx_spi_remove, 477 }; 478 479 module_platform_driver(bcm63xx_spi_driver); 480 481 MODULE_ALIAS("platform:bcm63xx_spi"); 482 MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>"); 483 MODULE_AUTHOR("Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>"); 484 MODULE_DESCRIPTION("Broadcom BCM63xx SPI Controller driver"); 485 MODULE_LICENSE("GPL"); 486