1 /* 2 * Broadcom BCM63xx SPI controller support 3 * 4 * Copyright (C) 2009-2012 Florian Fainelli <florian@openwrt.org> 5 * Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com> 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License 9 * as published by the Free Software Foundation; either version 2 10 * of the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the 19 * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, 20 */ 21 22 #include <linux/kernel.h> 23 #include <linux/init.h> 24 #include <linux/clk.h> 25 #include <linux/io.h> 26 #include <linux/module.h> 27 #include <linux/platform_device.h> 28 #include <linux/delay.h> 29 #include <linux/interrupt.h> 30 #include <linux/spi/spi.h> 31 #include <linux/completion.h> 32 #include <linux/err.h> 33 #include <linux/workqueue.h> 34 #include <linux/pm_runtime.h> 35 36 #include <bcm63xx_dev_spi.h> 37 38 #define PFX KBUILD_MODNAME 39 40 #define BCM63XX_SPI_MAX_PREPEND 15 41 42 struct bcm63xx_spi { 43 struct completion done; 44 45 void __iomem *regs; 46 int irq; 47 48 /* Platform data */ 49 unsigned fifo_size; 50 unsigned int msg_type_shift; 51 unsigned int msg_ctl_width; 52 53 /* data iomem */ 54 u8 __iomem *tx_io; 55 const u8 __iomem *rx_io; 56 57 struct clk *clk; 58 struct platform_device *pdev; 59 }; 60 61 static inline u8 bcm_spi_readb(struct bcm63xx_spi *bs, 62 unsigned int offset) 63 { 64 return bcm_readb(bs->regs + bcm63xx_spireg(offset)); 65 } 66 67 static inline u16 bcm_spi_readw(struct bcm63xx_spi *bs, 68 unsigned int offset) 69 { 70 return bcm_readw(bs->regs + bcm63xx_spireg(offset)); 71 } 72 73 static inline void bcm_spi_writeb(struct bcm63xx_spi *bs, 74 u8 value, unsigned int offset) 75 { 76 bcm_writeb(value, bs->regs + bcm63xx_spireg(offset)); 77 } 78 79 static inline void bcm_spi_writew(struct bcm63xx_spi *bs, 80 u16 value, unsigned int offset) 81 { 82 bcm_writew(value, bs->regs + bcm63xx_spireg(offset)); 83 } 84 85 static const unsigned bcm63xx_spi_freq_table[SPI_CLK_MASK][2] = { 86 { 20000000, SPI_CLK_20MHZ }, 87 { 12500000, SPI_CLK_12_50MHZ }, 88 { 6250000, SPI_CLK_6_250MHZ }, 89 { 3125000, SPI_CLK_3_125MHZ }, 90 { 1563000, SPI_CLK_1_563MHZ }, 91 { 781000, SPI_CLK_0_781MHZ }, 92 { 391000, SPI_CLK_0_391MHZ } 93 }; 94 95 static void bcm63xx_spi_setup_transfer(struct spi_device *spi, 96 struct spi_transfer *t) 97 { 98 struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master); 99 u8 clk_cfg, reg; 100 int i; 101 102 /* Find the closest clock configuration */ 103 for (i = 0; i < SPI_CLK_MASK; i++) { 104 if (t->speed_hz >= bcm63xx_spi_freq_table[i][0]) { 105 clk_cfg = bcm63xx_spi_freq_table[i][1]; 106 break; 107 } 108 } 109 110 /* No matching configuration found, default to lowest */ 111 if (i == SPI_CLK_MASK) 112 clk_cfg = SPI_CLK_0_391MHZ; 113 114 /* clear existing clock configuration bits of the register */ 115 reg = bcm_spi_readb(bs, SPI_CLK_CFG); 116 reg &= ~SPI_CLK_MASK; 117 reg |= clk_cfg; 118 119 bcm_spi_writeb(bs, reg, SPI_CLK_CFG); 120 dev_dbg(&spi->dev, "Setting clock register to %02x (hz %d)\n", 121 clk_cfg, t->speed_hz); 122 } 123 124 /* the spi->mode bits understood by this driver: */ 125 #define MODEBITS (SPI_CPOL | SPI_CPHA) 126 127 static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *first, 128 unsigned int num_transfers) 129 { 130 struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master); 131 u16 msg_ctl; 132 u16 cmd; 133 u8 rx_tail; 134 unsigned int i, timeout = 0, prepend_len = 0, len = 0; 135 struct spi_transfer *t = first; 136 bool do_rx = false; 137 bool do_tx = false; 138 139 /* Disable the CMD_DONE interrupt */ 140 bcm_spi_writeb(bs, 0, SPI_INT_MASK); 141 142 dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n", 143 t->tx_buf, t->rx_buf, t->len); 144 145 if (num_transfers > 1 && t->tx_buf && t->len <= BCM63XX_SPI_MAX_PREPEND) 146 prepend_len = t->len; 147 148 /* prepare the buffer */ 149 for (i = 0; i < num_transfers; i++) { 150 if (t->tx_buf) { 151 do_tx = true; 152 memcpy_toio(bs->tx_io + len, t->tx_buf, t->len); 153 154 /* don't prepend more than one tx */ 155 if (t != first) 156 prepend_len = 0; 157 } 158 159 if (t->rx_buf) { 160 do_rx = true; 161 /* prepend is half-duplex write only */ 162 if (t == first) 163 prepend_len = 0; 164 } 165 166 len += t->len; 167 168 t = list_entry(t->transfer_list.next, struct spi_transfer, 169 transfer_list); 170 } 171 172 len -= prepend_len; 173 174 init_completion(&bs->done); 175 176 /* Fill in the Message control register */ 177 msg_ctl = (len << SPI_BYTE_CNT_SHIFT); 178 179 if (do_rx && do_tx && prepend_len == 0) 180 msg_ctl |= (SPI_FD_RW << bs->msg_type_shift); 181 else if (do_rx) 182 msg_ctl |= (SPI_HD_R << bs->msg_type_shift); 183 else if (do_tx) 184 msg_ctl |= (SPI_HD_W << bs->msg_type_shift); 185 186 switch (bs->msg_ctl_width) { 187 case 8: 188 bcm_spi_writeb(bs, msg_ctl, SPI_MSG_CTL); 189 break; 190 case 16: 191 bcm_spi_writew(bs, msg_ctl, SPI_MSG_CTL); 192 break; 193 } 194 195 /* Issue the transfer */ 196 cmd = SPI_CMD_START_IMMEDIATE; 197 cmd |= (prepend_len << SPI_CMD_PREPEND_BYTE_CNT_SHIFT); 198 cmd |= (spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT); 199 bcm_spi_writew(bs, cmd, SPI_CMD); 200 201 /* Enable the CMD_DONE interrupt */ 202 bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK); 203 204 timeout = wait_for_completion_timeout(&bs->done, HZ); 205 if (!timeout) 206 return -ETIMEDOUT; 207 208 /* read out all data */ 209 rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL); 210 211 if (do_rx && rx_tail != len) 212 return -EIO; 213 214 if (!rx_tail) 215 return 0; 216 217 len = 0; 218 t = first; 219 /* Read out all the data */ 220 for (i = 0; i < num_transfers; i++) { 221 if (t->rx_buf) 222 memcpy_fromio(t->rx_buf, bs->rx_io + len, t->len); 223 224 if (t != first || prepend_len == 0) 225 len += t->len; 226 227 t = list_entry(t->transfer_list.next, struct spi_transfer, 228 transfer_list); 229 } 230 231 return 0; 232 } 233 234 static int bcm63xx_spi_transfer_one(struct spi_master *master, 235 struct spi_message *m) 236 { 237 struct bcm63xx_spi *bs = spi_master_get_devdata(master); 238 struct spi_transfer *t, *first = NULL; 239 struct spi_device *spi = m->spi; 240 int status = 0; 241 unsigned int n_transfers = 0, total_len = 0; 242 bool can_use_prepend = false; 243 244 /* 245 * This SPI controller does not support keeping CS active after a 246 * transfer. 247 * Work around this by merging as many transfers we can into one big 248 * full-duplex transfers. 249 */ 250 list_for_each_entry(t, &m->transfers, transfer_list) { 251 if (!first) 252 first = t; 253 254 n_transfers++; 255 total_len += t->len; 256 257 if (n_transfers == 2 && !first->rx_buf && !t->tx_buf && 258 first->len <= BCM63XX_SPI_MAX_PREPEND) 259 can_use_prepend = true; 260 else if (can_use_prepend && t->tx_buf) 261 can_use_prepend = false; 262 263 /* we can only transfer one fifo worth of data */ 264 if ((can_use_prepend && 265 total_len > (bs->fifo_size + BCM63XX_SPI_MAX_PREPEND)) || 266 (!can_use_prepend && total_len > bs->fifo_size)) { 267 dev_err(&spi->dev, "unable to do transfers larger than FIFO size (%i > %i)\n", 268 total_len, bs->fifo_size); 269 status = -EINVAL; 270 goto exit; 271 } 272 273 /* all combined transfers have to have the same speed */ 274 if (t->speed_hz != first->speed_hz) { 275 dev_err(&spi->dev, "unable to change speed between transfers\n"); 276 status = -EINVAL; 277 goto exit; 278 } 279 280 /* CS will be deasserted directly after transfer */ 281 if (t->delay_usecs) { 282 dev_err(&spi->dev, "unable to keep CS asserted after transfer\n"); 283 status = -EINVAL; 284 goto exit; 285 } 286 287 if (t->cs_change || 288 list_is_last(&t->transfer_list, &m->transfers)) { 289 /* configure adapter for a new transfer */ 290 bcm63xx_spi_setup_transfer(spi, first); 291 292 /* send the data */ 293 status = bcm63xx_txrx_bufs(spi, first, n_transfers); 294 if (status) 295 goto exit; 296 297 m->actual_length += total_len; 298 299 first = NULL; 300 n_transfers = 0; 301 total_len = 0; 302 can_use_prepend = false; 303 } 304 } 305 exit: 306 m->status = status; 307 spi_finalize_current_message(master); 308 309 return 0; 310 } 311 312 /* This driver supports single master mode only. Hence 313 * CMD_DONE is the only interrupt we care about 314 */ 315 static irqreturn_t bcm63xx_spi_interrupt(int irq, void *dev_id) 316 { 317 struct spi_master *master = (struct spi_master *)dev_id; 318 struct bcm63xx_spi *bs = spi_master_get_devdata(master); 319 u8 intr; 320 321 /* Read interupts and clear them immediately */ 322 intr = bcm_spi_readb(bs, SPI_INT_STATUS); 323 bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS); 324 bcm_spi_writeb(bs, 0, SPI_INT_MASK); 325 326 /* A transfer completed */ 327 if (intr & SPI_INTR_CMD_DONE) 328 complete(&bs->done); 329 330 return IRQ_HANDLED; 331 } 332 333 334 static int bcm63xx_spi_probe(struct platform_device *pdev) 335 { 336 struct resource *r; 337 struct device *dev = &pdev->dev; 338 struct bcm63xx_spi_pdata *pdata = dev_get_platdata(&pdev->dev); 339 int irq; 340 struct spi_master *master; 341 struct clk *clk; 342 struct bcm63xx_spi *bs; 343 int ret; 344 345 irq = platform_get_irq(pdev, 0); 346 if (irq < 0) { 347 dev_err(dev, "no irq\n"); 348 ret = -ENXIO; 349 goto out; 350 } 351 352 clk = clk_get(dev, "spi"); 353 if (IS_ERR(clk)) { 354 dev_err(dev, "no clock for device\n"); 355 ret = PTR_ERR(clk); 356 goto out; 357 } 358 359 master = spi_alloc_master(dev, sizeof(*bs)); 360 if (!master) { 361 dev_err(dev, "out of memory\n"); 362 ret = -ENOMEM; 363 goto out_clk; 364 } 365 366 bs = spi_master_get_devdata(master); 367 368 platform_set_drvdata(pdev, master); 369 bs->pdev = pdev; 370 371 r = platform_get_resource(pdev, IORESOURCE_MEM, 0); 372 bs->regs = devm_ioremap_resource(&pdev->dev, r); 373 if (IS_ERR(bs->regs)) { 374 ret = PTR_ERR(bs->regs); 375 goto out_err; 376 } 377 378 bs->irq = irq; 379 bs->clk = clk; 380 bs->fifo_size = pdata->fifo_size; 381 382 ret = devm_request_irq(&pdev->dev, irq, bcm63xx_spi_interrupt, 0, 383 pdev->name, master); 384 if (ret) { 385 dev_err(dev, "unable to request irq\n"); 386 goto out_err; 387 } 388 389 master->bus_num = pdata->bus_num; 390 master->num_chipselect = pdata->num_chipselect; 391 master->transfer_one_message = bcm63xx_spi_transfer_one; 392 master->mode_bits = MODEBITS; 393 master->bits_per_word_mask = SPI_BPW_MASK(8); 394 master->auto_runtime_pm = true; 395 bs->msg_type_shift = pdata->msg_type_shift; 396 bs->msg_ctl_width = pdata->msg_ctl_width; 397 bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA)); 398 bs->rx_io = (const u8 *)(bs->regs + bcm63xx_spireg(SPI_RX_DATA)); 399 400 switch (bs->msg_ctl_width) { 401 case 8: 402 case 16: 403 break; 404 default: 405 dev_err(dev, "unsupported MSG_CTL width: %d\n", 406 bs->msg_ctl_width); 407 goto out_err; 408 } 409 410 /* Initialize hardware */ 411 clk_prepare_enable(bs->clk); 412 bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS); 413 414 /* register and we are done */ 415 ret = spi_register_master(master); 416 if (ret) { 417 dev_err(dev, "spi register failed\n"); 418 goto out_clk_disable; 419 } 420 421 dev_info(dev, "at 0x%08x (irq %d, FIFOs size %d)\n", 422 r->start, irq, bs->fifo_size); 423 424 return 0; 425 426 out_clk_disable: 427 clk_disable_unprepare(clk); 428 out_err: 429 spi_master_put(master); 430 out_clk: 431 clk_put(clk); 432 out: 433 return ret; 434 } 435 436 static int bcm63xx_spi_remove(struct platform_device *pdev) 437 { 438 struct spi_master *master = spi_master_get(platform_get_drvdata(pdev)); 439 struct bcm63xx_spi *bs = spi_master_get_devdata(master); 440 441 spi_unregister_master(master); 442 443 /* reset spi block */ 444 bcm_spi_writeb(bs, 0, SPI_INT_MASK); 445 446 /* HW shutdown */ 447 clk_disable_unprepare(bs->clk); 448 clk_put(bs->clk); 449 450 spi_master_put(master); 451 452 return 0; 453 } 454 455 #ifdef CONFIG_PM 456 static int bcm63xx_spi_suspend(struct device *dev) 457 { 458 struct spi_master *master = dev_get_drvdata(dev); 459 struct bcm63xx_spi *bs = spi_master_get_devdata(master); 460 461 spi_master_suspend(master); 462 463 clk_disable_unprepare(bs->clk); 464 465 return 0; 466 } 467 468 static int bcm63xx_spi_resume(struct device *dev) 469 { 470 struct spi_master *master = dev_get_drvdata(dev); 471 struct bcm63xx_spi *bs = spi_master_get_devdata(master); 472 473 clk_prepare_enable(bs->clk); 474 475 spi_master_resume(master); 476 477 return 0; 478 } 479 480 static const struct dev_pm_ops bcm63xx_spi_pm_ops = { 481 .suspend = bcm63xx_spi_suspend, 482 .resume = bcm63xx_spi_resume, 483 }; 484 485 #define BCM63XX_SPI_PM_OPS (&bcm63xx_spi_pm_ops) 486 #else 487 #define BCM63XX_SPI_PM_OPS NULL 488 #endif 489 490 static struct platform_driver bcm63xx_spi_driver = { 491 .driver = { 492 .name = "bcm63xx-spi", 493 .owner = THIS_MODULE, 494 .pm = BCM63XX_SPI_PM_OPS, 495 }, 496 .probe = bcm63xx_spi_probe, 497 .remove = bcm63xx_spi_remove, 498 }; 499 500 module_platform_driver(bcm63xx_spi_driver); 501 502 MODULE_ALIAS("platform:bcm63xx_spi"); 503 MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>"); 504 MODULE_AUTHOR("Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>"); 505 MODULE_DESCRIPTION("Broadcom BCM63xx SPI Controller driver"); 506 MODULE_LICENSE("GPL"); 507