xref: /openbmc/linux/drivers/spi/atmel-quadspi.c (revision ccb01374)
1 /*
2  * Driver for Atmel QSPI Controller
3  *
4  * Copyright (C) 2015 Atmel Corporation
5  * Copyright (C) 2018 Cryptera A/S
6  *
7  * Author: Cyrille Pitchen <cyrille.pitchen@atmel.com>
8  * Author: Piotr Bugalski <bugalski.piotr@gmail.com>
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of the GNU General Public License version 2 as
12  * published by the Free Software Foundation.
13  *
14  * This program is distributed in the hope that it will be useful, but WITHOUT
15  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
16  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
17  * more details.
18  *
19  * You should have received a copy of the GNU General Public License along with
20  * this program.  If not, see <http://www.gnu.org/licenses/>.
21  *
22  * This driver is based on drivers/mtd/spi-nor/fsl-quadspi.c from Freescale.
23  */
24 
25 #include <linux/kernel.h>
26 #include <linux/clk.h>
27 #include <linux/module.h>
28 #include <linux/platform_device.h>
29 #include <linux/delay.h>
30 #include <linux/err.h>
31 #include <linux/interrupt.h>
32 #include <linux/of.h>
33 
34 #include <linux/io.h>
35 #include <linux/spi/spi-mem.h>
36 
37 /* QSPI register offsets */
38 #define QSPI_CR      0x0000  /* Control Register */
39 #define QSPI_MR      0x0004  /* Mode Register */
40 #define QSPI_RD      0x0008  /* Receive Data Register */
41 #define QSPI_TD      0x000c  /* Transmit Data Register */
42 #define QSPI_SR      0x0010  /* Status Register */
43 #define QSPI_IER     0x0014  /* Interrupt Enable Register */
44 #define QSPI_IDR     0x0018  /* Interrupt Disable Register */
45 #define QSPI_IMR     0x001c  /* Interrupt Mask Register */
46 #define QSPI_SCR     0x0020  /* Serial Clock Register */
47 
48 #define QSPI_IAR     0x0030  /* Instruction Address Register */
49 #define QSPI_ICR     0x0034  /* Instruction Code Register */
50 #define QSPI_IFR     0x0038  /* Instruction Frame Register */
51 
52 #define QSPI_SMR     0x0040  /* Scrambling Mode Register */
53 #define QSPI_SKR     0x0044  /* Scrambling Key Register */
54 
55 #define QSPI_WPMR    0x00E4  /* Write Protection Mode Register */
56 #define QSPI_WPSR    0x00E8  /* Write Protection Status Register */
57 
58 #define QSPI_VERSION 0x00FC  /* Version Register */
59 
60 
61 /* Bitfields in QSPI_CR (Control Register) */
62 #define QSPI_CR_QSPIEN                  BIT(0)
63 #define QSPI_CR_QSPIDIS                 BIT(1)
64 #define QSPI_CR_SWRST                   BIT(7)
65 #define QSPI_CR_LASTXFER                BIT(24)
66 
67 /* Bitfields in QSPI_MR (Mode Register) */
68 #define QSPI_MR_SMM                     BIT(0)
69 #define QSPI_MR_LLB                     BIT(1)
70 #define QSPI_MR_WDRBT                   BIT(2)
71 #define QSPI_MR_SMRM                    BIT(3)
72 #define QSPI_MR_CSMODE_MASK             GENMASK(5, 4)
73 #define QSPI_MR_CSMODE_NOT_RELOADED     (0 << 4)
74 #define QSPI_MR_CSMODE_LASTXFER         (1 << 4)
75 #define QSPI_MR_CSMODE_SYSTEMATICALLY   (2 << 4)
76 #define QSPI_MR_NBBITS_MASK             GENMASK(11, 8)
77 #define QSPI_MR_NBBITS(n)               ((((n) - 8) << 8) & QSPI_MR_NBBITS_MASK)
78 #define QSPI_MR_DLYBCT_MASK             GENMASK(23, 16)
79 #define QSPI_MR_DLYBCT(n)               (((n) << 16) & QSPI_MR_DLYBCT_MASK)
80 #define QSPI_MR_DLYCS_MASK              GENMASK(31, 24)
81 #define QSPI_MR_DLYCS(n)                (((n) << 24) & QSPI_MR_DLYCS_MASK)
82 
83 /* Bitfields in QSPI_SR/QSPI_IER/QSPI_IDR/QSPI_IMR  */
84 #define QSPI_SR_RDRF                    BIT(0)
85 #define QSPI_SR_TDRE                    BIT(1)
86 #define QSPI_SR_TXEMPTY                 BIT(2)
87 #define QSPI_SR_OVRES                   BIT(3)
88 #define QSPI_SR_CSR                     BIT(8)
89 #define QSPI_SR_CSS                     BIT(9)
90 #define QSPI_SR_INSTRE                  BIT(10)
91 #define QSPI_SR_QSPIENS                 BIT(24)
92 
93 #define QSPI_SR_CMD_COMPLETED	(QSPI_SR_INSTRE | QSPI_SR_CSR)
94 
95 /* Bitfields in QSPI_SCR (Serial Clock Register) */
96 #define QSPI_SCR_CPOL                   BIT(0)
97 #define QSPI_SCR_CPHA                   BIT(1)
98 #define QSPI_SCR_SCBR_MASK              GENMASK(15, 8)
99 #define QSPI_SCR_SCBR(n)                (((n) << 8) & QSPI_SCR_SCBR_MASK)
100 #define QSPI_SCR_DLYBS_MASK             GENMASK(23, 16)
101 #define QSPI_SCR_DLYBS(n)               (((n) << 16) & QSPI_SCR_DLYBS_MASK)
102 
103 /* Bitfields in QSPI_ICR (Instruction Code Register) */
104 #define QSPI_ICR_INST_MASK              GENMASK(7, 0)
105 #define QSPI_ICR_INST(inst)             (((inst) << 0) & QSPI_ICR_INST_MASK)
106 #define QSPI_ICR_OPT_MASK               GENMASK(23, 16)
107 #define QSPI_ICR_OPT(opt)               (((opt) << 16) & QSPI_ICR_OPT_MASK)
108 
109 /* Bitfields in QSPI_IFR (Instruction Frame Register) */
110 #define QSPI_IFR_WIDTH_MASK             GENMASK(2, 0)
111 #define QSPI_IFR_WIDTH_SINGLE_BIT_SPI   (0 << 0)
112 #define QSPI_IFR_WIDTH_DUAL_OUTPUT      (1 << 0)
113 #define QSPI_IFR_WIDTH_QUAD_OUTPUT      (2 << 0)
114 #define QSPI_IFR_WIDTH_DUAL_IO          (3 << 0)
115 #define QSPI_IFR_WIDTH_QUAD_IO          (4 << 0)
116 #define QSPI_IFR_WIDTH_DUAL_CMD         (5 << 0)
117 #define QSPI_IFR_WIDTH_QUAD_CMD         (6 << 0)
118 #define QSPI_IFR_INSTEN                 BIT(4)
119 #define QSPI_IFR_ADDREN                 BIT(5)
120 #define QSPI_IFR_OPTEN                  BIT(6)
121 #define QSPI_IFR_DATAEN                 BIT(7)
122 #define QSPI_IFR_OPTL_MASK              GENMASK(9, 8)
123 #define QSPI_IFR_OPTL_1BIT              (0 << 8)
124 #define QSPI_IFR_OPTL_2BIT              (1 << 8)
125 #define QSPI_IFR_OPTL_4BIT              (2 << 8)
126 #define QSPI_IFR_OPTL_8BIT              (3 << 8)
127 #define QSPI_IFR_ADDRL                  BIT(10)
128 #define QSPI_IFR_TFRTYP_MASK            GENMASK(13, 12)
129 #define QSPI_IFR_TFRTYP_TRSFR_READ      (0 << 12)
130 #define QSPI_IFR_TFRTYP_TRSFR_READ_MEM  (1 << 12)
131 #define QSPI_IFR_TFRTYP_TRSFR_WRITE     (2 << 12)
132 #define QSPI_IFR_TFRTYP_TRSFR_WRITE_MEM (3 << 13)
133 #define QSPI_IFR_CRM                    BIT(14)
134 #define QSPI_IFR_NBDUM_MASK             GENMASK(20, 16)
135 #define QSPI_IFR_NBDUM(n)               (((n) << 16) & QSPI_IFR_NBDUM_MASK)
136 
137 /* Bitfields in QSPI_SMR (Scrambling Mode Register) */
138 #define QSPI_SMR_SCREN                  BIT(0)
139 #define QSPI_SMR_RVDIS                  BIT(1)
140 
141 /* Bitfields in QSPI_WPMR (Write Protection Mode Register) */
142 #define QSPI_WPMR_WPEN                  BIT(0)
143 #define QSPI_WPMR_WPKEY_MASK            GENMASK(31, 8)
144 #define QSPI_WPMR_WPKEY(wpkey)          (((wpkey) << 8) & QSPI_WPMR_WPKEY_MASK)
145 
146 /* Bitfields in QSPI_WPSR (Write Protection Status Register) */
147 #define QSPI_WPSR_WPVS                  BIT(0)
148 #define QSPI_WPSR_WPVSRC_MASK           GENMASK(15, 8)
149 #define QSPI_WPSR_WPVSRC(src)           (((src) << 8) & QSPI_WPSR_WPVSRC)
150 
151 
152 struct atmel_qspi {
153 	void __iomem		*regs;
154 	void __iomem		*mem;
155 	struct clk		*clk;
156 	struct platform_device	*pdev;
157 	u32			pending;
158 	struct completion	cmd_completion;
159 };
160 
161 struct qspi_mode {
162 	u8 cmd_buswidth;
163 	u8 addr_buswidth;
164 	u8 data_buswidth;
165 	u32 config;
166 };
167 
168 static const struct qspi_mode sama5d2_qspi_modes[] = {
169 	{ 1, 1, 1, QSPI_IFR_WIDTH_SINGLE_BIT_SPI },
170 	{ 1, 1, 2, QSPI_IFR_WIDTH_DUAL_OUTPUT },
171 	{ 1, 1, 4, QSPI_IFR_WIDTH_QUAD_OUTPUT },
172 	{ 1, 2, 2, QSPI_IFR_WIDTH_DUAL_IO },
173 	{ 1, 4, 4, QSPI_IFR_WIDTH_QUAD_IO },
174 	{ 2, 2, 2, QSPI_IFR_WIDTH_DUAL_CMD },
175 	{ 4, 4, 4, QSPI_IFR_WIDTH_QUAD_CMD },
176 };
177 
178 /* Register access functions */
179 static inline u32 qspi_readl(struct atmel_qspi *aq, u32 reg)
180 {
181 	return readl_relaxed(aq->regs + reg);
182 }
183 
184 static inline void qspi_writel(struct atmel_qspi *aq, u32 reg, u32 value)
185 {
186 	writel_relaxed(value, aq->regs + reg);
187 }
188 
189 static inline bool is_compatible(const struct spi_mem_op *op,
190 				 const struct qspi_mode *mode)
191 {
192 	if (op->cmd.buswidth != mode->cmd_buswidth)
193 		return false;
194 
195 	if (op->addr.nbytes && op->addr.buswidth != mode->addr_buswidth)
196 		return false;
197 
198 	if (op->data.nbytes && op->data.buswidth != mode->data_buswidth)
199 		return false;
200 
201 	return true;
202 }
203 
204 static int find_mode(const struct spi_mem_op *op)
205 {
206 	u32 i;
207 
208 	for (i = 0; i < ARRAY_SIZE(sama5d2_qspi_modes); i++)
209 		if (is_compatible(op, &sama5d2_qspi_modes[i]))
210 			return i;
211 
212 	return -1;
213 }
214 
215 static bool atmel_qspi_supports_op(struct spi_mem *mem,
216 				   const struct spi_mem_op *op)
217 {
218 	if (find_mode(op) < 0)
219 		return false;
220 
221 	/* special case not supported by hardware */
222 	if (op->addr.nbytes == 2 && op->cmd.buswidth != op->addr.buswidth &&
223 		op->dummy.nbytes == 0)
224 		return false;
225 
226 	return true;
227 }
228 
229 static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
230 {
231 	struct atmel_qspi *aq = spi_controller_get_devdata(mem->spi->master);
232 	int mode;
233 	u32 dummy_cycles = 0;
234 	u32 iar, icr, ifr, sr;
235 	int err = 0;
236 
237 	iar = 0;
238 	icr = QSPI_ICR_INST(op->cmd.opcode);
239 	ifr = QSPI_IFR_INSTEN;
240 
241 	qspi_writel(aq, QSPI_MR, QSPI_MR_SMM);
242 
243 	mode = find_mode(op);
244 	if (mode < 0)
245 		return -ENOTSUPP;
246 
247 	ifr |= sama5d2_qspi_modes[mode].config;
248 
249 	if (op->dummy.buswidth && op->dummy.nbytes)
250 		dummy_cycles = op->dummy.nbytes * 8 / op->dummy.buswidth;
251 
252 	if (op->addr.buswidth) {
253 		switch (op->addr.nbytes) {
254 		case 0:
255 			break;
256 		case 1:
257 			ifr |= QSPI_IFR_OPTEN | QSPI_IFR_OPTL_8BIT;
258 			icr |= QSPI_ICR_OPT(op->addr.val & 0xff);
259 			break;
260 		case 2:
261 			if (dummy_cycles < 8 / op->addr.buswidth) {
262 				ifr &= ~QSPI_IFR_INSTEN;
263 				ifr |= QSPI_IFR_ADDREN;
264 				iar = (op->cmd.opcode << 16) |
265 					(op->addr.val & 0xffff);
266 			} else {
267 				ifr |= QSPI_IFR_ADDREN;
268 				iar = (op->addr.val << 8) & 0xffffff;
269 				dummy_cycles -= 8 / op->addr.buswidth;
270 			}
271 			break;
272 		case 3:
273 			ifr |= QSPI_IFR_ADDREN;
274 			iar = op->addr.val & 0xffffff;
275 			break;
276 		case 4:
277 			ifr |= QSPI_IFR_ADDREN | QSPI_IFR_ADDRL;
278 			iar = op->addr.val & 0x7ffffff;
279 			break;
280 		default:
281 			return -ENOTSUPP;
282 		}
283 	}
284 
285 	/* Set number of dummy cycles */
286 	if (dummy_cycles)
287 		ifr |= QSPI_IFR_NBDUM(dummy_cycles);
288 
289 	/* Set data enable */
290 	if (op->data.nbytes)
291 		ifr |= QSPI_IFR_DATAEN;
292 
293 	if (op->data.dir == SPI_MEM_DATA_IN && op->data.nbytes)
294 		ifr |= QSPI_IFR_TFRTYP_TRSFR_READ;
295 	else
296 		ifr |= QSPI_IFR_TFRTYP_TRSFR_WRITE;
297 
298 	/* Clear pending interrupts */
299 	(void)qspi_readl(aq, QSPI_SR);
300 
301 	/* Set QSPI Instruction Frame registers */
302 	qspi_writel(aq, QSPI_IAR, iar);
303 	qspi_writel(aq, QSPI_ICR, icr);
304 	qspi_writel(aq, QSPI_IFR, ifr);
305 
306 	/* Skip to the final steps if there is no data */
307 	if (op->data.nbytes) {
308 		/* Dummy read of QSPI_IFR to synchronize APB and AHB accesses */
309 		(void)qspi_readl(aq, QSPI_IFR);
310 
311 		/* Send/Receive data */
312 		if (op->data.dir == SPI_MEM_DATA_IN)
313 			_memcpy_fromio(op->data.buf.in,
314 				aq->mem + iar, op->data.nbytes);
315 		else
316 			_memcpy_toio(aq->mem + iar,
317 				op->data.buf.out, op->data.nbytes);
318 
319 		/* Release the chip-select */
320 		qspi_writel(aq, QSPI_CR, QSPI_CR_LASTXFER);
321 	}
322 
323 	/* Poll INSTRuction End status */
324 	sr = qspi_readl(aq, QSPI_SR);
325 	if ((sr & QSPI_SR_CMD_COMPLETED) == QSPI_SR_CMD_COMPLETED)
326 		return err;
327 
328 	/* Wait for INSTRuction End interrupt */
329 	reinit_completion(&aq->cmd_completion);
330 	aq->pending = sr & QSPI_SR_CMD_COMPLETED;
331 	qspi_writel(aq, QSPI_IER, QSPI_SR_CMD_COMPLETED);
332 	if (!wait_for_completion_timeout(&aq->cmd_completion,
333 					 msecs_to_jiffies(1000)))
334 		err = -ETIMEDOUT;
335 	qspi_writel(aq, QSPI_IDR, QSPI_SR_CMD_COMPLETED);
336 
337 	return err;
338 }
339 
340 const char *atmel_qspi_get_name(struct spi_mem *spimem)
341 {
342 	return dev_name(spimem->spi->dev.parent);
343 }
344 
345 static const struct spi_controller_mem_ops atmel_qspi_mem_ops = {
346 	.supports_op = atmel_qspi_supports_op,
347 	.exec_op = atmel_qspi_exec_op,
348 	.get_name = atmel_qspi_get_name
349 };
350 
351 static int atmel_qspi_setup(struct spi_device *spi)
352 {
353 	struct spi_controller *ctrl = spi->master;
354 	struct atmel_qspi *aq = spi_controller_get_devdata(ctrl);
355 	unsigned long src_rate;
356 	u32 scr, scbr;
357 
358 	if (ctrl->busy)
359 		return -EBUSY;
360 
361 	if (!spi->max_speed_hz)
362 		return -EINVAL;
363 
364 	src_rate = clk_get_rate(aq->clk);
365 	if (!src_rate)
366 		return -EINVAL;
367 
368 	/* Compute the QSPI baudrate */
369 	scbr = DIV_ROUND_UP(src_rate, spi->max_speed_hz);
370 	if (scbr > 0)
371 		scbr--;
372 
373 	scr = QSPI_SCR_SCBR(scbr);
374 	qspi_writel(aq, QSPI_SCR, scr);
375 
376 	return 0;
377 }
378 
379 static int atmel_qspi_init(struct atmel_qspi *aq)
380 {
381 	/* Reset the QSPI controller */
382 	qspi_writel(aq, QSPI_CR, QSPI_CR_SWRST);
383 
384 	/* Enable the QSPI controller */
385 	qspi_writel(aq, QSPI_CR, QSPI_CR_QSPIEN);
386 
387 	return 0;
388 }
389 
390 static irqreturn_t atmel_qspi_interrupt(int irq, void *dev_id)
391 {
392 	struct atmel_qspi *aq = (struct atmel_qspi *)dev_id;
393 	u32 status, mask, pending;
394 
395 	status = qspi_readl(aq, QSPI_SR);
396 	mask = qspi_readl(aq, QSPI_IMR);
397 	pending = status & mask;
398 
399 	if (!pending)
400 		return IRQ_NONE;
401 
402 	aq->pending |= pending;
403 	if ((aq->pending & QSPI_SR_CMD_COMPLETED) == QSPI_SR_CMD_COMPLETED)
404 		complete(&aq->cmd_completion);
405 
406 	return IRQ_HANDLED;
407 }
408 
409 static int atmel_qspi_probe(struct platform_device *pdev)
410 {
411 	struct spi_controller *ctrl;
412 	struct atmel_qspi *aq;
413 	struct resource *res;
414 	int irq, err = 0;
415 
416 	ctrl = spi_alloc_master(&pdev->dev, sizeof(*aq));
417 	if (!ctrl)
418 		return -ENOMEM;
419 
420 	ctrl->mode_bits = SPI_RX_DUAL | SPI_RX_QUAD | SPI_TX_DUAL | SPI_TX_QUAD;
421 	ctrl->setup = atmel_qspi_setup;
422 	ctrl->bus_num = -1;
423 	ctrl->mem_ops = &atmel_qspi_mem_ops;
424 	ctrl->num_chipselect = 1;
425 	ctrl->dev.of_node = pdev->dev.of_node;
426 	platform_set_drvdata(pdev, ctrl);
427 
428 	aq = spi_controller_get_devdata(ctrl);
429 
430 	init_completion(&aq->cmd_completion);
431 	aq->pdev = pdev;
432 
433 	/* Map the registers */
434 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi_base");
435 	aq->regs = devm_ioremap_resource(&pdev->dev, res);
436 	if (IS_ERR(aq->regs)) {
437 		dev_err(&pdev->dev, "missing registers\n");
438 		err = PTR_ERR(aq->regs);
439 		goto exit;
440 	}
441 
442 	/* Map the AHB memory */
443 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi_mmap");
444 	aq->mem = devm_ioremap_resource(&pdev->dev, res);
445 	if (IS_ERR(aq->mem)) {
446 		dev_err(&pdev->dev, "missing AHB memory\n");
447 		err = PTR_ERR(aq->mem);
448 		goto exit;
449 	}
450 
451 	/* Get the peripheral clock */
452 	aq->clk = devm_clk_get(&pdev->dev, NULL);
453 	if (IS_ERR(aq->clk)) {
454 		dev_err(&pdev->dev, "missing peripheral clock\n");
455 		err = PTR_ERR(aq->clk);
456 		goto exit;
457 	}
458 
459 	/* Enable the peripheral clock */
460 	err = clk_prepare_enable(aq->clk);
461 	if (err) {
462 		dev_err(&pdev->dev, "failed to enable the peripheral clock\n");
463 		goto exit;
464 	}
465 
466 	/* Request the IRQ */
467 	irq = platform_get_irq(pdev, 0);
468 	if (irq < 0) {
469 		dev_err(&pdev->dev, "missing IRQ\n");
470 		err = irq;
471 		goto disable_clk;
472 	}
473 	err = devm_request_irq(&pdev->dev, irq, atmel_qspi_interrupt,
474 			       0, dev_name(&pdev->dev), aq);
475 	if (err)
476 		goto disable_clk;
477 
478 	err = atmel_qspi_init(aq);
479 	if (err)
480 		goto disable_clk;
481 
482 	err = spi_register_controller(ctrl);
483 	if (err)
484 		goto disable_clk;
485 
486 	return 0;
487 
488 disable_clk:
489 	clk_disable_unprepare(aq->clk);
490 exit:
491 	spi_controller_put(ctrl);
492 
493 	return err;
494 }
495 
496 static int atmel_qspi_remove(struct platform_device *pdev)
497 {
498 	struct spi_controller *ctrl = platform_get_drvdata(pdev);
499 	struct atmel_qspi *aq = spi_controller_get_devdata(ctrl);
500 
501 	spi_unregister_controller(ctrl);
502 	qspi_writel(aq, QSPI_CR, QSPI_CR_QSPIDIS);
503 	clk_disable_unprepare(aq->clk);
504 	return 0;
505 }
506 
507 static int __maybe_unused atmel_qspi_suspend(struct device *dev)
508 {
509 	struct atmel_qspi *aq = dev_get_drvdata(dev);
510 
511 	clk_disable_unprepare(aq->clk);
512 
513 	return 0;
514 }
515 
516 static int __maybe_unused atmel_qspi_resume(struct device *dev)
517 {
518 	struct atmel_qspi *aq = dev_get_drvdata(dev);
519 
520 	clk_prepare_enable(aq->clk);
521 
522 	return atmel_qspi_init(aq);
523 }
524 
525 static SIMPLE_DEV_PM_OPS(atmel_qspi_pm_ops, atmel_qspi_suspend,
526 			 atmel_qspi_resume);
527 
528 static const struct of_device_id atmel_qspi_dt_ids[] = {
529 	{ .compatible = "atmel,sama5d2-qspi" },
530 	{ /* sentinel */ }
531 };
532 
533 MODULE_DEVICE_TABLE(of, atmel_qspi_dt_ids);
534 
535 static struct platform_driver atmel_qspi_driver = {
536 	.driver = {
537 		.name	= "atmel_qspi",
538 		.of_match_table	= atmel_qspi_dt_ids,
539 		.pm	= &atmel_qspi_pm_ops,
540 	},
541 	.probe		= atmel_qspi_probe,
542 	.remove		= atmel_qspi_remove,
543 };
544 module_platform_driver(atmel_qspi_driver);
545 
546 MODULE_AUTHOR("Cyrille Pitchen <cyrille.pitchen@atmel.com>");
547 MODULE_AUTHOR("Piotr Bugalski <bugalski.piotr@gmail.com");
548 MODULE_DESCRIPTION("Atmel QSPI Controller driver");
549 MODULE_LICENSE("GPL v2");
550