1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Driver for Atmel QSPI Controller 4 * 5 * Copyright (C) 2015 Atmel Corporation 6 * Copyright (C) 2018 Cryptera A/S 7 * 8 * Author: Cyrille Pitchen <cyrille.pitchen@atmel.com> 9 * Author: Piotr Bugalski <bugalski.piotr@gmail.com> 10 * 11 * This driver is based on drivers/mtd/spi-nor/fsl-quadspi.c from Freescale. 12 */ 13 14 #include <linux/clk.h> 15 #include <linux/delay.h> 16 #include <linux/err.h> 17 #include <linux/interrupt.h> 18 #include <linux/io.h> 19 #include <linux/kernel.h> 20 #include <linux/module.h> 21 #include <linux/of.h> 22 #include <linux/of_platform.h> 23 #include <linux/platform_device.h> 24 #include <linux/spi/spi-mem.h> 25 26 /* QSPI register offsets */ 27 #define QSPI_CR 0x0000 /* Control Register */ 28 #define QSPI_MR 0x0004 /* Mode Register */ 29 #define QSPI_RD 0x0008 /* Receive Data Register */ 30 #define QSPI_TD 0x000c /* Transmit Data Register */ 31 #define QSPI_SR 0x0010 /* Status Register */ 32 #define QSPI_IER 0x0014 /* Interrupt Enable Register */ 33 #define QSPI_IDR 0x0018 /* Interrupt Disable Register */ 34 #define QSPI_IMR 0x001c /* Interrupt Mask Register */ 35 #define QSPI_SCR 0x0020 /* Serial Clock Register */ 36 37 #define QSPI_IAR 0x0030 /* Instruction Address Register */ 38 #define QSPI_ICR 0x0034 /* Instruction Code Register */ 39 #define QSPI_WICR 0x0034 /* Write Instruction Code Register */ 40 #define QSPI_IFR 0x0038 /* Instruction Frame Register */ 41 #define QSPI_RICR 0x003C /* Read Instruction Code Register */ 42 43 #define QSPI_SMR 0x0040 /* Scrambling Mode Register */ 44 #define QSPI_SKR 0x0044 /* Scrambling Key Register */ 45 46 #define QSPI_WPMR 0x00E4 /* Write Protection Mode Register */ 47 #define QSPI_WPSR 0x00E8 /* Write Protection Status Register */ 48 49 #define QSPI_VERSION 0x00FC /* Version Register */ 50 51 52 /* Bitfields in QSPI_CR (Control Register) */ 53 #define QSPI_CR_QSPIEN BIT(0) 54 #define QSPI_CR_QSPIDIS BIT(1) 55 #define QSPI_CR_SWRST BIT(7) 56 #define QSPI_CR_LASTXFER BIT(24) 57 58 /* Bitfields in QSPI_MR (Mode Register) */ 59 #define QSPI_MR_SMM BIT(0) 60 #define QSPI_MR_LLB BIT(1) 61 #define QSPI_MR_WDRBT BIT(2) 62 #define QSPI_MR_SMRM BIT(3) 63 #define QSPI_MR_CSMODE_MASK GENMASK(5, 4) 64 #define QSPI_MR_CSMODE_NOT_RELOADED (0 << 4) 65 #define QSPI_MR_CSMODE_LASTXFER (1 << 4) 66 #define QSPI_MR_CSMODE_SYSTEMATICALLY (2 << 4) 67 #define QSPI_MR_NBBITS_MASK GENMASK(11, 8) 68 #define QSPI_MR_NBBITS(n) ((((n) - 8) << 8) & QSPI_MR_NBBITS_MASK) 69 #define QSPI_MR_DLYBCT_MASK GENMASK(23, 16) 70 #define QSPI_MR_DLYBCT(n) (((n) << 16) & QSPI_MR_DLYBCT_MASK) 71 #define QSPI_MR_DLYCS_MASK GENMASK(31, 24) 72 #define QSPI_MR_DLYCS(n) (((n) << 24) & QSPI_MR_DLYCS_MASK) 73 74 /* Bitfields in QSPI_SR/QSPI_IER/QSPI_IDR/QSPI_IMR */ 75 #define QSPI_SR_RDRF BIT(0) 76 #define QSPI_SR_TDRE BIT(1) 77 #define QSPI_SR_TXEMPTY BIT(2) 78 #define QSPI_SR_OVRES BIT(3) 79 #define QSPI_SR_CSR BIT(8) 80 #define QSPI_SR_CSS BIT(9) 81 #define QSPI_SR_INSTRE BIT(10) 82 #define QSPI_SR_QSPIENS BIT(24) 83 84 #define QSPI_SR_CMD_COMPLETED (QSPI_SR_INSTRE | QSPI_SR_CSR) 85 86 /* Bitfields in QSPI_SCR (Serial Clock Register) */ 87 #define QSPI_SCR_CPOL BIT(0) 88 #define QSPI_SCR_CPHA BIT(1) 89 #define QSPI_SCR_SCBR_MASK GENMASK(15, 8) 90 #define QSPI_SCR_SCBR(n) (((n) << 8) & QSPI_SCR_SCBR_MASK) 91 #define QSPI_SCR_DLYBS_MASK GENMASK(23, 16) 92 #define QSPI_SCR_DLYBS(n) (((n) << 16) & QSPI_SCR_DLYBS_MASK) 93 94 /* Bitfields in QSPI_ICR (Read/Write Instruction Code Register) */ 95 #define QSPI_ICR_INST_MASK GENMASK(7, 0) 96 #define QSPI_ICR_INST(inst) (((inst) << 0) & QSPI_ICR_INST_MASK) 97 #define QSPI_ICR_OPT_MASK GENMASK(23, 16) 98 #define QSPI_ICR_OPT(opt) (((opt) << 16) & QSPI_ICR_OPT_MASK) 99 100 /* Bitfields in QSPI_IFR (Instruction Frame Register) */ 101 #define QSPI_IFR_WIDTH_MASK GENMASK(2, 0) 102 #define QSPI_IFR_WIDTH_SINGLE_BIT_SPI (0 << 0) 103 #define QSPI_IFR_WIDTH_DUAL_OUTPUT (1 << 0) 104 #define QSPI_IFR_WIDTH_QUAD_OUTPUT (2 << 0) 105 #define QSPI_IFR_WIDTH_DUAL_IO (3 << 0) 106 #define QSPI_IFR_WIDTH_QUAD_IO (4 << 0) 107 #define QSPI_IFR_WIDTH_DUAL_CMD (5 << 0) 108 #define QSPI_IFR_WIDTH_QUAD_CMD (6 << 0) 109 #define QSPI_IFR_INSTEN BIT(4) 110 #define QSPI_IFR_ADDREN BIT(5) 111 #define QSPI_IFR_OPTEN BIT(6) 112 #define QSPI_IFR_DATAEN BIT(7) 113 #define QSPI_IFR_OPTL_MASK GENMASK(9, 8) 114 #define QSPI_IFR_OPTL_1BIT (0 << 8) 115 #define QSPI_IFR_OPTL_2BIT (1 << 8) 116 #define QSPI_IFR_OPTL_4BIT (2 << 8) 117 #define QSPI_IFR_OPTL_8BIT (3 << 8) 118 #define QSPI_IFR_ADDRL BIT(10) 119 #define QSPI_IFR_TFRTYP_MEM BIT(12) 120 #define QSPI_IFR_SAMA5D2_WRITE_TRSFR BIT(13) 121 #define QSPI_IFR_CRM BIT(14) 122 #define QSPI_IFR_NBDUM_MASK GENMASK(20, 16) 123 #define QSPI_IFR_NBDUM(n) (((n) << 16) & QSPI_IFR_NBDUM_MASK) 124 #define QSPI_IFR_APBTFRTYP_READ BIT(24) /* Defined in SAM9X60 */ 125 126 /* Bitfields in QSPI_SMR (Scrambling Mode Register) */ 127 #define QSPI_SMR_SCREN BIT(0) 128 #define QSPI_SMR_RVDIS BIT(1) 129 130 /* Bitfields in QSPI_WPMR (Write Protection Mode Register) */ 131 #define QSPI_WPMR_WPEN BIT(0) 132 #define QSPI_WPMR_WPKEY_MASK GENMASK(31, 8) 133 #define QSPI_WPMR_WPKEY(wpkey) (((wpkey) << 8) & QSPI_WPMR_WPKEY_MASK) 134 135 /* Bitfields in QSPI_WPSR (Write Protection Status Register) */ 136 #define QSPI_WPSR_WPVS BIT(0) 137 #define QSPI_WPSR_WPVSRC_MASK GENMASK(15, 8) 138 #define QSPI_WPSR_WPVSRC(src) (((src) << 8) & QSPI_WPSR_WPVSRC) 139 140 struct atmel_qspi_caps { 141 bool has_qspick; 142 bool has_ricr; 143 }; 144 145 struct atmel_qspi { 146 void __iomem *regs; 147 void __iomem *mem; 148 struct clk *pclk; 149 struct clk *qspick; 150 struct platform_device *pdev; 151 const struct atmel_qspi_caps *caps; 152 resource_size_t mmap_size; 153 u32 pending; 154 u32 mr; 155 u32 scr; 156 struct completion cmd_completion; 157 }; 158 159 struct atmel_qspi_mode { 160 u8 cmd_buswidth; 161 u8 addr_buswidth; 162 u8 data_buswidth; 163 u32 config; 164 }; 165 166 static const struct atmel_qspi_mode atmel_qspi_modes[] = { 167 { 1, 1, 1, QSPI_IFR_WIDTH_SINGLE_BIT_SPI }, 168 { 1, 1, 2, QSPI_IFR_WIDTH_DUAL_OUTPUT }, 169 { 1, 1, 4, QSPI_IFR_WIDTH_QUAD_OUTPUT }, 170 { 1, 2, 2, QSPI_IFR_WIDTH_DUAL_IO }, 171 { 1, 4, 4, QSPI_IFR_WIDTH_QUAD_IO }, 172 { 2, 2, 2, QSPI_IFR_WIDTH_DUAL_CMD }, 173 { 4, 4, 4, QSPI_IFR_WIDTH_QUAD_CMD }, 174 }; 175 176 #ifdef VERBOSE_DEBUG 177 static const char *atmel_qspi_reg_name(u32 offset, char *tmp, size_t sz) 178 { 179 switch (offset) { 180 case QSPI_CR: 181 return "CR"; 182 case QSPI_MR: 183 return "MR"; 184 case QSPI_RD: 185 return "MR"; 186 case QSPI_TD: 187 return "TD"; 188 case QSPI_SR: 189 return "SR"; 190 case QSPI_IER: 191 return "IER"; 192 case QSPI_IDR: 193 return "IDR"; 194 case QSPI_IMR: 195 return "IMR"; 196 case QSPI_SCR: 197 return "SCR"; 198 case QSPI_IAR: 199 return "IAR"; 200 case QSPI_ICR: 201 return "ICR/WICR"; 202 case QSPI_IFR: 203 return "IFR"; 204 case QSPI_RICR: 205 return "RICR"; 206 case QSPI_SMR: 207 return "SMR"; 208 case QSPI_SKR: 209 return "SKR"; 210 case QSPI_WPMR: 211 return "WPMR"; 212 case QSPI_WPSR: 213 return "WPSR"; 214 case QSPI_VERSION: 215 return "VERSION"; 216 default: 217 snprintf(tmp, sz, "0x%02x", offset); 218 break; 219 } 220 221 return tmp; 222 } 223 #endif /* VERBOSE_DEBUG */ 224 225 static u32 atmel_qspi_read(struct atmel_qspi *aq, u32 offset) 226 { 227 u32 value = readl_relaxed(aq->regs + offset); 228 229 #ifdef VERBOSE_DEBUG 230 char tmp[8]; 231 232 dev_vdbg(&aq->pdev->dev, "read 0x%08x from %s\n", value, 233 atmel_qspi_reg_name(offset, tmp, sizeof(tmp))); 234 #endif /* VERBOSE_DEBUG */ 235 236 return value; 237 } 238 239 static void atmel_qspi_write(u32 value, struct atmel_qspi *aq, u32 offset) 240 { 241 #ifdef VERBOSE_DEBUG 242 char tmp[8]; 243 244 dev_vdbg(&aq->pdev->dev, "write 0x%08x into %s\n", value, 245 atmel_qspi_reg_name(offset, tmp, sizeof(tmp))); 246 #endif /* VERBOSE_DEBUG */ 247 248 writel_relaxed(value, aq->regs + offset); 249 } 250 251 static inline bool atmel_qspi_is_compatible(const struct spi_mem_op *op, 252 const struct atmel_qspi_mode *mode) 253 { 254 if (op->cmd.buswidth != mode->cmd_buswidth) 255 return false; 256 257 if (op->addr.nbytes && op->addr.buswidth != mode->addr_buswidth) 258 return false; 259 260 if (op->data.nbytes && op->data.buswidth != mode->data_buswidth) 261 return false; 262 263 return true; 264 } 265 266 static int atmel_qspi_find_mode(const struct spi_mem_op *op) 267 { 268 u32 i; 269 270 for (i = 0; i < ARRAY_SIZE(atmel_qspi_modes); i++) 271 if (atmel_qspi_is_compatible(op, &atmel_qspi_modes[i])) 272 return i; 273 274 return -ENOTSUPP; 275 } 276 277 static bool atmel_qspi_supports_op(struct spi_mem *mem, 278 const struct spi_mem_op *op) 279 { 280 if (atmel_qspi_find_mode(op) < 0) 281 return false; 282 283 /* special case not supported by hardware */ 284 if (op->addr.nbytes == 2 && op->cmd.buswidth != op->addr.buswidth && 285 op->dummy.nbytes == 0) 286 return false; 287 288 /* DTR ops not supported. */ 289 if (op->cmd.dtr || op->addr.dtr || op->dummy.dtr || op->data.dtr) 290 return false; 291 if (op->cmd.nbytes != 1) 292 return false; 293 294 return true; 295 } 296 297 static int atmel_qspi_set_cfg(struct atmel_qspi *aq, 298 const struct spi_mem_op *op, u32 *offset) 299 { 300 u32 iar, icr, ifr; 301 u32 dummy_cycles = 0; 302 int mode; 303 304 iar = 0; 305 icr = QSPI_ICR_INST(op->cmd.opcode); 306 ifr = QSPI_IFR_INSTEN; 307 308 mode = atmel_qspi_find_mode(op); 309 if (mode < 0) 310 return mode; 311 ifr |= atmel_qspi_modes[mode].config; 312 313 if (op->dummy.buswidth && op->dummy.nbytes) 314 dummy_cycles = op->dummy.nbytes * 8 / op->dummy.buswidth; 315 316 /* 317 * The controller allows 24 and 32-bit addressing while NAND-flash 318 * requires 16-bit long. Handling 8-bit long addresses is done using 319 * the option field. For the 16-bit addresses, the workaround depends 320 * of the number of requested dummy bits. If there are 8 or more dummy 321 * cycles, the address is shifted and sent with the first dummy byte. 322 * Otherwise opcode is disabled and the first byte of the address 323 * contains the command opcode (works only if the opcode and address 324 * use the same buswidth). The limitation is when the 16-bit address is 325 * used without enough dummy cycles and the opcode is using a different 326 * buswidth than the address. 327 */ 328 if (op->addr.buswidth) { 329 switch (op->addr.nbytes) { 330 case 0: 331 break; 332 case 1: 333 ifr |= QSPI_IFR_OPTEN | QSPI_IFR_OPTL_8BIT; 334 icr |= QSPI_ICR_OPT(op->addr.val & 0xff); 335 break; 336 case 2: 337 if (dummy_cycles < 8 / op->addr.buswidth) { 338 ifr &= ~QSPI_IFR_INSTEN; 339 ifr |= QSPI_IFR_ADDREN; 340 iar = (op->cmd.opcode << 16) | 341 (op->addr.val & 0xffff); 342 } else { 343 ifr |= QSPI_IFR_ADDREN; 344 iar = (op->addr.val << 8) & 0xffffff; 345 dummy_cycles -= 8 / op->addr.buswidth; 346 } 347 break; 348 case 3: 349 ifr |= QSPI_IFR_ADDREN; 350 iar = op->addr.val & 0xffffff; 351 break; 352 case 4: 353 ifr |= QSPI_IFR_ADDREN | QSPI_IFR_ADDRL; 354 iar = op->addr.val & 0x7ffffff; 355 break; 356 default: 357 return -ENOTSUPP; 358 } 359 } 360 361 /* offset of the data access in the QSPI memory space */ 362 *offset = iar; 363 364 /* Set number of dummy cycles */ 365 if (dummy_cycles) 366 ifr |= QSPI_IFR_NBDUM(dummy_cycles); 367 368 /* Set data enable and data transfer type. */ 369 if (op->data.nbytes) { 370 ifr |= QSPI_IFR_DATAEN; 371 372 if (op->addr.nbytes) 373 ifr |= QSPI_IFR_TFRTYP_MEM; 374 } 375 376 /* 377 * If the QSPI controller is set in regular SPI mode, set it in 378 * Serial Memory Mode (SMM). 379 */ 380 if (aq->mr != QSPI_MR_SMM) { 381 atmel_qspi_write(QSPI_MR_SMM, aq, QSPI_MR); 382 aq->mr = QSPI_MR_SMM; 383 } 384 385 /* Clear pending interrupts */ 386 (void)atmel_qspi_read(aq, QSPI_SR); 387 388 /* Set QSPI Instruction Frame registers. */ 389 if (op->addr.nbytes && !op->data.nbytes) 390 atmel_qspi_write(iar, aq, QSPI_IAR); 391 392 if (aq->caps->has_ricr) { 393 if (op->data.dir == SPI_MEM_DATA_IN) 394 atmel_qspi_write(icr, aq, QSPI_RICR); 395 else 396 atmel_qspi_write(icr, aq, QSPI_WICR); 397 } else { 398 if (op->data.nbytes && op->data.dir == SPI_MEM_DATA_OUT) 399 ifr |= QSPI_IFR_SAMA5D2_WRITE_TRSFR; 400 401 atmel_qspi_write(icr, aq, QSPI_ICR); 402 } 403 404 atmel_qspi_write(ifr, aq, QSPI_IFR); 405 406 return 0; 407 } 408 409 static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) 410 { 411 struct atmel_qspi *aq = spi_controller_get_devdata(mem->spi->master); 412 u32 sr, offset; 413 int err; 414 415 /* 416 * Check if the address exceeds the MMIO window size. An improvement 417 * would be to add support for regular SPI mode and fall back to it 418 * when the flash memories overrun the controller's memory space. 419 */ 420 if (op->addr.val + op->data.nbytes > aq->mmap_size) 421 return -ENOTSUPP; 422 423 err = atmel_qspi_set_cfg(aq, op, &offset); 424 if (err) 425 return err; 426 427 /* Skip to the final steps if there is no data */ 428 if (op->data.nbytes) { 429 /* Dummy read of QSPI_IFR to synchronize APB and AHB accesses */ 430 (void)atmel_qspi_read(aq, QSPI_IFR); 431 432 /* Send/Receive data */ 433 if (op->data.dir == SPI_MEM_DATA_IN) 434 memcpy_fromio(op->data.buf.in, aq->mem + offset, 435 op->data.nbytes); 436 else 437 memcpy_toio(aq->mem + offset, op->data.buf.out, 438 op->data.nbytes); 439 440 /* Release the chip-select */ 441 atmel_qspi_write(QSPI_CR_LASTXFER, aq, QSPI_CR); 442 } 443 444 /* Poll INSTRuction End status */ 445 sr = atmel_qspi_read(aq, QSPI_SR); 446 if ((sr & QSPI_SR_CMD_COMPLETED) == QSPI_SR_CMD_COMPLETED) 447 return err; 448 449 /* Wait for INSTRuction End interrupt */ 450 reinit_completion(&aq->cmd_completion); 451 aq->pending = sr & QSPI_SR_CMD_COMPLETED; 452 atmel_qspi_write(QSPI_SR_CMD_COMPLETED, aq, QSPI_IER); 453 if (!wait_for_completion_timeout(&aq->cmd_completion, 454 msecs_to_jiffies(1000))) 455 err = -ETIMEDOUT; 456 atmel_qspi_write(QSPI_SR_CMD_COMPLETED, aq, QSPI_IDR); 457 458 return err; 459 } 460 461 static const char *atmel_qspi_get_name(struct spi_mem *spimem) 462 { 463 return dev_name(spimem->spi->dev.parent); 464 } 465 466 static const struct spi_controller_mem_ops atmel_qspi_mem_ops = { 467 .supports_op = atmel_qspi_supports_op, 468 .exec_op = atmel_qspi_exec_op, 469 .get_name = atmel_qspi_get_name 470 }; 471 472 static int atmel_qspi_setup(struct spi_device *spi) 473 { 474 struct spi_controller *ctrl = spi->master; 475 struct atmel_qspi *aq = spi_controller_get_devdata(ctrl); 476 unsigned long src_rate; 477 u32 scbr; 478 479 if (ctrl->busy) 480 return -EBUSY; 481 482 if (!spi->max_speed_hz) 483 return -EINVAL; 484 485 src_rate = clk_get_rate(aq->pclk); 486 if (!src_rate) 487 return -EINVAL; 488 489 /* Compute the QSPI baudrate */ 490 scbr = DIV_ROUND_UP(src_rate, spi->max_speed_hz); 491 if (scbr > 0) 492 scbr--; 493 494 aq->scr = QSPI_SCR_SCBR(scbr); 495 atmel_qspi_write(aq->scr, aq, QSPI_SCR); 496 497 return 0; 498 } 499 500 static void atmel_qspi_init(struct atmel_qspi *aq) 501 { 502 /* Reset the QSPI controller */ 503 atmel_qspi_write(QSPI_CR_SWRST, aq, QSPI_CR); 504 505 /* Set the QSPI controller by default in Serial Memory Mode */ 506 atmel_qspi_write(QSPI_MR_SMM, aq, QSPI_MR); 507 aq->mr = QSPI_MR_SMM; 508 509 /* Enable the QSPI controller */ 510 atmel_qspi_write(QSPI_CR_QSPIEN, aq, QSPI_CR); 511 } 512 513 static irqreturn_t atmel_qspi_interrupt(int irq, void *dev_id) 514 { 515 struct atmel_qspi *aq = dev_id; 516 u32 status, mask, pending; 517 518 status = atmel_qspi_read(aq, QSPI_SR); 519 mask = atmel_qspi_read(aq, QSPI_IMR); 520 pending = status & mask; 521 522 if (!pending) 523 return IRQ_NONE; 524 525 aq->pending |= pending; 526 if ((aq->pending & QSPI_SR_CMD_COMPLETED) == QSPI_SR_CMD_COMPLETED) 527 complete(&aq->cmd_completion); 528 529 return IRQ_HANDLED; 530 } 531 532 static int atmel_qspi_probe(struct platform_device *pdev) 533 { 534 struct spi_controller *ctrl; 535 struct atmel_qspi *aq; 536 struct resource *res; 537 int irq, err = 0; 538 539 ctrl = devm_spi_alloc_master(&pdev->dev, sizeof(*aq)); 540 if (!ctrl) 541 return -ENOMEM; 542 543 ctrl->mode_bits = SPI_RX_DUAL | SPI_RX_QUAD | SPI_TX_DUAL | SPI_TX_QUAD; 544 ctrl->setup = atmel_qspi_setup; 545 ctrl->bus_num = -1; 546 ctrl->mem_ops = &atmel_qspi_mem_ops; 547 ctrl->num_chipselect = 1; 548 ctrl->dev.of_node = pdev->dev.of_node; 549 platform_set_drvdata(pdev, ctrl); 550 551 aq = spi_controller_get_devdata(ctrl); 552 553 init_completion(&aq->cmd_completion); 554 aq->pdev = pdev; 555 556 /* Map the registers */ 557 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi_base"); 558 aq->regs = devm_ioremap_resource(&pdev->dev, res); 559 if (IS_ERR(aq->regs)) { 560 dev_err(&pdev->dev, "missing registers\n"); 561 return PTR_ERR(aq->regs); 562 } 563 564 /* Map the AHB memory */ 565 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi_mmap"); 566 aq->mem = devm_ioremap_resource(&pdev->dev, res); 567 if (IS_ERR(aq->mem)) { 568 dev_err(&pdev->dev, "missing AHB memory\n"); 569 return PTR_ERR(aq->mem); 570 } 571 572 aq->mmap_size = resource_size(res); 573 574 /* Get the peripheral clock */ 575 aq->pclk = devm_clk_get(&pdev->dev, "pclk"); 576 if (IS_ERR(aq->pclk)) 577 aq->pclk = devm_clk_get(&pdev->dev, NULL); 578 579 if (IS_ERR(aq->pclk)) { 580 dev_err(&pdev->dev, "missing peripheral clock\n"); 581 return PTR_ERR(aq->pclk); 582 } 583 584 /* Enable the peripheral clock */ 585 err = clk_prepare_enable(aq->pclk); 586 if (err) { 587 dev_err(&pdev->dev, "failed to enable the peripheral clock\n"); 588 return err; 589 } 590 591 aq->caps = of_device_get_match_data(&pdev->dev); 592 if (!aq->caps) { 593 dev_err(&pdev->dev, "Could not retrieve QSPI caps\n"); 594 err = -EINVAL; 595 goto disable_pclk; 596 } 597 598 if (aq->caps->has_qspick) { 599 /* Get the QSPI system clock */ 600 aq->qspick = devm_clk_get(&pdev->dev, "qspick"); 601 if (IS_ERR(aq->qspick)) { 602 dev_err(&pdev->dev, "missing system clock\n"); 603 err = PTR_ERR(aq->qspick); 604 goto disable_pclk; 605 } 606 607 /* Enable the QSPI system clock */ 608 err = clk_prepare_enable(aq->qspick); 609 if (err) { 610 dev_err(&pdev->dev, 611 "failed to enable the QSPI system clock\n"); 612 goto disable_pclk; 613 } 614 } 615 616 /* Request the IRQ */ 617 irq = platform_get_irq(pdev, 0); 618 if (irq < 0) { 619 err = irq; 620 goto disable_qspick; 621 } 622 err = devm_request_irq(&pdev->dev, irq, atmel_qspi_interrupt, 623 0, dev_name(&pdev->dev), aq); 624 if (err) 625 goto disable_qspick; 626 627 atmel_qspi_init(aq); 628 629 err = spi_register_controller(ctrl); 630 if (err) 631 goto disable_qspick; 632 633 return 0; 634 635 disable_qspick: 636 clk_disable_unprepare(aq->qspick); 637 disable_pclk: 638 clk_disable_unprepare(aq->pclk); 639 640 return err; 641 } 642 643 static int atmel_qspi_remove(struct platform_device *pdev) 644 { 645 struct spi_controller *ctrl = platform_get_drvdata(pdev); 646 struct atmel_qspi *aq = spi_controller_get_devdata(ctrl); 647 648 spi_unregister_controller(ctrl); 649 atmel_qspi_write(QSPI_CR_QSPIDIS, aq, QSPI_CR); 650 clk_disable_unprepare(aq->qspick); 651 clk_disable_unprepare(aq->pclk); 652 return 0; 653 } 654 655 static int __maybe_unused atmel_qspi_suspend(struct device *dev) 656 { 657 struct spi_controller *ctrl = dev_get_drvdata(dev); 658 struct atmel_qspi *aq = spi_controller_get_devdata(ctrl); 659 660 clk_disable_unprepare(aq->qspick); 661 clk_disable_unprepare(aq->pclk); 662 663 return 0; 664 } 665 666 static int __maybe_unused atmel_qspi_resume(struct device *dev) 667 { 668 struct spi_controller *ctrl = dev_get_drvdata(dev); 669 struct atmel_qspi *aq = spi_controller_get_devdata(ctrl); 670 671 clk_prepare_enable(aq->pclk); 672 clk_prepare_enable(aq->qspick); 673 674 atmel_qspi_init(aq); 675 676 atmel_qspi_write(aq->scr, aq, QSPI_SCR); 677 678 return 0; 679 } 680 681 static SIMPLE_DEV_PM_OPS(atmel_qspi_pm_ops, atmel_qspi_suspend, 682 atmel_qspi_resume); 683 684 static const struct atmel_qspi_caps atmel_sama5d2_qspi_caps = {}; 685 686 static const struct atmel_qspi_caps atmel_sam9x60_qspi_caps = { 687 .has_qspick = true, 688 .has_ricr = true, 689 }; 690 691 static const struct of_device_id atmel_qspi_dt_ids[] = { 692 { 693 .compatible = "atmel,sama5d2-qspi", 694 .data = &atmel_sama5d2_qspi_caps, 695 }, 696 { 697 .compatible = "microchip,sam9x60-qspi", 698 .data = &atmel_sam9x60_qspi_caps, 699 }, 700 { /* sentinel */ } 701 }; 702 703 MODULE_DEVICE_TABLE(of, atmel_qspi_dt_ids); 704 705 static struct platform_driver atmel_qspi_driver = { 706 .driver = { 707 .name = "atmel_qspi", 708 .of_match_table = atmel_qspi_dt_ids, 709 .pm = &atmel_qspi_pm_ops, 710 }, 711 .probe = atmel_qspi_probe, 712 .remove = atmel_qspi_remove, 713 }; 714 module_platform_driver(atmel_qspi_driver); 715 716 MODULE_AUTHOR("Cyrille Pitchen <cyrille.pitchen@atmel.com>"); 717 MODULE_AUTHOR("Piotr Bugalski <bugalski.piotr@gmail.com"); 718 MODULE_DESCRIPTION("Atmel QSPI Controller driver"); 719 MODULE_LICENSE("GPL v2"); 720