1 // SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) 2 // Copyright(c) 2015-18 Intel Corporation. 3 4 /* 5 * stream.c - SoundWire Bus stream operations. 6 */ 7 8 #include <linux/delay.h> 9 #include <linux/device.h> 10 #include <linux/init.h> 11 #include <linux/module.h> 12 #include <linux/mod_devicetable.h> 13 #include <linux/slab.h> 14 #include <linux/soundwire/sdw_registers.h> 15 #include <linux/soundwire/sdw.h> 16 #include <sound/soc.h> 17 #include "bus.h" 18 19 /* 20 * Array of supported rows and columns as per MIPI SoundWire Specification 1.1 21 * 22 * The rows are arranged as per the array index value programmed 23 * in register. The index 15 has dummy value 0 in order to fill hole. 24 */ 25 int sdw_rows[SDW_FRAME_ROWS] = {48, 50, 60, 64, 75, 80, 125, 147, 26 96, 100, 120, 128, 150, 160, 250, 0, 27 192, 200, 240, 256, 72, 144, 90, 180}; 28 EXPORT_SYMBOL(sdw_rows); 29 30 int sdw_cols[SDW_FRAME_COLS] = {2, 4, 6, 8, 10, 12, 14, 16}; 31 EXPORT_SYMBOL(sdw_cols); 32 33 int sdw_find_col_index(int col) 34 { 35 int i; 36 37 for (i = 0; i < SDW_FRAME_COLS; i++) { 38 if (sdw_cols[i] == col) 39 return i; 40 } 41 42 pr_warn("Requested column not found, selecting lowest column no: 2\n"); 43 return 0; 44 } 45 EXPORT_SYMBOL(sdw_find_col_index); 46 47 int sdw_find_row_index(int row) 48 { 49 int i; 50 51 for (i = 0; i < SDW_FRAME_ROWS; i++) { 52 if (sdw_rows[i] == row) 53 return i; 54 } 55 56 pr_warn("Requested row not found, selecting lowest row no: 48\n"); 57 return 0; 58 } 59 EXPORT_SYMBOL(sdw_find_row_index); 60 61 static int _sdw_program_slave_port_params(struct sdw_bus *bus, 62 struct sdw_slave *slave, 63 struct sdw_transport_params *t_params, 64 enum sdw_dpn_type type) 65 { 66 u32 addr1, addr2, addr3, addr4; 67 int ret; 68 u16 wbuf; 69 70 if (bus->params.next_bank) { 71 addr1 = SDW_DPN_OFFSETCTRL2_B1(t_params->port_num); 72 addr2 = SDW_DPN_BLOCKCTRL3_B1(t_params->port_num); 73 addr3 = SDW_DPN_SAMPLECTRL2_B1(t_params->port_num); 74 addr4 = SDW_DPN_HCTRL_B1(t_params->port_num); 75 } else { 76 addr1 = SDW_DPN_OFFSETCTRL2_B0(t_params->port_num); 77 addr2 = SDW_DPN_BLOCKCTRL3_B0(t_params->port_num); 78 addr3 = SDW_DPN_SAMPLECTRL2_B0(t_params->port_num); 79 addr4 = SDW_DPN_HCTRL_B0(t_params->port_num); 80 } 81 82 /* Program DPN_OffsetCtrl2 registers */ 83 ret = sdw_write(slave, addr1, t_params->offset2); 84 if (ret < 0) { 85 dev_err(bus->dev, "DPN_OffsetCtrl2 register write failed\n"); 86 return ret; 87 } 88 89 /* Program DPN_BlockCtrl3 register */ 90 ret = sdw_write(slave, addr2, t_params->blk_pkg_mode); 91 if (ret < 0) { 92 dev_err(bus->dev, "DPN_BlockCtrl3 register write failed\n"); 93 return ret; 94 } 95 96 /* 97 * Data ports are FULL, SIMPLE and REDUCED. This function handles 98 * FULL and REDUCED only and beyond this point only FULL is 99 * handled, so bail out if we are not FULL data port type 100 */ 101 if (type != SDW_DPN_FULL) 102 return ret; 103 104 /* Program DPN_SampleCtrl2 register */ 105 wbuf = FIELD_GET(SDW_DPN_SAMPLECTRL_HIGH, t_params->sample_interval - 1); 106 107 ret = sdw_write(slave, addr3, wbuf); 108 if (ret < 0) { 109 dev_err(bus->dev, "DPN_SampleCtrl2 register write failed\n"); 110 return ret; 111 } 112 113 /* Program DPN_HCtrl register */ 114 wbuf = FIELD_PREP(SDW_DPN_HCTRL_HSTART, t_params->hstart); 115 wbuf |= FIELD_PREP(SDW_DPN_HCTRL_HSTOP, t_params->hstop); 116 117 ret = sdw_write(slave, addr4, wbuf); 118 if (ret < 0) 119 dev_err(bus->dev, "DPN_HCtrl register write failed\n"); 120 121 return ret; 122 } 123 124 static int sdw_program_slave_port_params(struct sdw_bus *bus, 125 struct sdw_slave_runtime *s_rt, 126 struct sdw_port_runtime *p_rt) 127 { 128 struct sdw_transport_params *t_params = &p_rt->transport_params; 129 struct sdw_port_params *p_params = &p_rt->port_params; 130 struct sdw_slave_prop *slave_prop = &s_rt->slave->prop; 131 u32 addr1, addr2, addr3, addr4, addr5, addr6; 132 struct sdw_dpn_prop *dpn_prop; 133 int ret; 134 u8 wbuf; 135 136 dpn_prop = sdw_get_slave_dpn_prop(s_rt->slave, 137 s_rt->direction, 138 t_params->port_num); 139 if (!dpn_prop) 140 return -EINVAL; 141 142 addr1 = SDW_DPN_PORTCTRL(t_params->port_num); 143 addr2 = SDW_DPN_BLOCKCTRL1(t_params->port_num); 144 145 if (bus->params.next_bank) { 146 addr3 = SDW_DPN_SAMPLECTRL1_B1(t_params->port_num); 147 addr4 = SDW_DPN_OFFSETCTRL1_B1(t_params->port_num); 148 addr5 = SDW_DPN_BLOCKCTRL2_B1(t_params->port_num); 149 addr6 = SDW_DPN_LANECTRL_B1(t_params->port_num); 150 151 } else { 152 addr3 = SDW_DPN_SAMPLECTRL1_B0(t_params->port_num); 153 addr4 = SDW_DPN_OFFSETCTRL1_B0(t_params->port_num); 154 addr5 = SDW_DPN_BLOCKCTRL2_B0(t_params->port_num); 155 addr6 = SDW_DPN_LANECTRL_B0(t_params->port_num); 156 } 157 158 /* Program DPN_PortCtrl register */ 159 wbuf = FIELD_PREP(SDW_DPN_PORTCTRL_DATAMODE, p_params->data_mode); 160 wbuf |= FIELD_PREP(SDW_DPN_PORTCTRL_FLOWMODE, p_params->flow_mode); 161 162 ret = sdw_update(s_rt->slave, addr1, 0xF, wbuf); 163 if (ret < 0) { 164 dev_err(&s_rt->slave->dev, 165 "DPN_PortCtrl register write failed for port %d\n", 166 t_params->port_num); 167 return ret; 168 } 169 170 if (!dpn_prop->read_only_wordlength) { 171 /* Program DPN_BlockCtrl1 register */ 172 ret = sdw_write(s_rt->slave, addr2, (p_params->bps - 1)); 173 if (ret < 0) { 174 dev_err(&s_rt->slave->dev, 175 "DPN_BlockCtrl1 register write failed for port %d\n", 176 t_params->port_num); 177 return ret; 178 } 179 } 180 181 /* Program DPN_SampleCtrl1 register */ 182 wbuf = (t_params->sample_interval - 1) & SDW_DPN_SAMPLECTRL_LOW; 183 ret = sdw_write(s_rt->slave, addr3, wbuf); 184 if (ret < 0) { 185 dev_err(&s_rt->slave->dev, 186 "DPN_SampleCtrl1 register write failed for port %d\n", 187 t_params->port_num); 188 return ret; 189 } 190 191 /* Program DPN_OffsetCtrl1 registers */ 192 ret = sdw_write(s_rt->slave, addr4, t_params->offset1); 193 if (ret < 0) { 194 dev_err(&s_rt->slave->dev, 195 "DPN_OffsetCtrl1 register write failed for port %d\n", 196 t_params->port_num); 197 return ret; 198 } 199 200 /* Program DPN_BlockCtrl2 register*/ 201 if (t_params->blk_grp_ctrl_valid) { 202 ret = sdw_write(s_rt->slave, addr5, t_params->blk_grp_ctrl); 203 if (ret < 0) { 204 dev_err(&s_rt->slave->dev, 205 "DPN_BlockCtrl2 reg write failed for port %d\n", 206 t_params->port_num); 207 return ret; 208 } 209 } 210 211 /* program DPN_LaneCtrl register */ 212 if (slave_prop->lane_control_support) { 213 ret = sdw_write(s_rt->slave, addr6, t_params->lane_ctrl); 214 if (ret < 0) { 215 dev_err(&s_rt->slave->dev, 216 "DPN_LaneCtrl register write failed for port %d\n", 217 t_params->port_num); 218 return ret; 219 } 220 } 221 222 if (dpn_prop->type != SDW_DPN_SIMPLE) { 223 ret = _sdw_program_slave_port_params(bus, s_rt->slave, 224 t_params, dpn_prop->type); 225 if (ret < 0) 226 dev_err(&s_rt->slave->dev, 227 "Transport reg write failed for port: %d\n", 228 t_params->port_num); 229 } 230 231 return ret; 232 } 233 234 static int sdw_program_master_port_params(struct sdw_bus *bus, 235 struct sdw_port_runtime *p_rt) 236 { 237 int ret; 238 239 /* 240 * we need to set transport and port parameters for the port. 241 * Transport parameters refers to the sample interval, offsets and 242 * hstart/stop etc of the data. Port parameters refers to word 243 * length, flow mode etc of the port 244 */ 245 ret = bus->port_ops->dpn_set_port_transport_params(bus, 246 &p_rt->transport_params, 247 bus->params.next_bank); 248 if (ret < 0) 249 return ret; 250 251 return bus->port_ops->dpn_set_port_params(bus, 252 &p_rt->port_params, 253 bus->params.next_bank); 254 } 255 256 /** 257 * sdw_program_port_params() - Programs transport parameters of Master(s) 258 * and Slave(s) 259 * 260 * @m_rt: Master stream runtime 261 */ 262 static int sdw_program_port_params(struct sdw_master_runtime *m_rt) 263 { 264 struct sdw_slave_runtime *s_rt; 265 struct sdw_bus *bus = m_rt->bus; 266 struct sdw_port_runtime *p_rt; 267 int ret = 0; 268 269 /* Program transport & port parameters for Slave(s) */ 270 list_for_each_entry(s_rt, &m_rt->slave_rt_list, m_rt_node) { 271 list_for_each_entry(p_rt, &s_rt->port_list, port_node) { 272 ret = sdw_program_slave_port_params(bus, s_rt, p_rt); 273 if (ret < 0) 274 return ret; 275 } 276 } 277 278 /* Program transport & port parameters for Master(s) */ 279 list_for_each_entry(p_rt, &m_rt->port_list, port_node) { 280 ret = sdw_program_master_port_params(bus, p_rt); 281 if (ret < 0) 282 return ret; 283 } 284 285 return 0; 286 } 287 288 /** 289 * sdw_enable_disable_slave_ports: Enable/disable slave data port 290 * 291 * @bus: bus instance 292 * @s_rt: slave runtime 293 * @p_rt: port runtime 294 * @en: enable or disable operation 295 * 296 * This function only sets the enable/disable bits in the relevant bank, the 297 * actual enable/disable is done with a bank switch 298 */ 299 static int sdw_enable_disable_slave_ports(struct sdw_bus *bus, 300 struct sdw_slave_runtime *s_rt, 301 struct sdw_port_runtime *p_rt, 302 bool en) 303 { 304 struct sdw_transport_params *t_params = &p_rt->transport_params; 305 u32 addr; 306 int ret; 307 308 if (bus->params.next_bank) 309 addr = SDW_DPN_CHANNELEN_B1(p_rt->num); 310 else 311 addr = SDW_DPN_CHANNELEN_B0(p_rt->num); 312 313 /* 314 * Since bus doesn't support sharing a port across two streams, 315 * it is safe to reset this register 316 */ 317 if (en) 318 ret = sdw_write(s_rt->slave, addr, p_rt->ch_mask); 319 else 320 ret = sdw_write(s_rt->slave, addr, 0x0); 321 322 if (ret < 0) 323 dev_err(&s_rt->slave->dev, 324 "Slave chn_en reg write failed:%d port:%d\n", 325 ret, t_params->port_num); 326 327 return ret; 328 } 329 330 static int sdw_enable_disable_master_ports(struct sdw_master_runtime *m_rt, 331 struct sdw_port_runtime *p_rt, 332 bool en) 333 { 334 struct sdw_transport_params *t_params = &p_rt->transport_params; 335 struct sdw_bus *bus = m_rt->bus; 336 struct sdw_enable_ch enable_ch; 337 int ret; 338 339 enable_ch.port_num = p_rt->num; 340 enable_ch.ch_mask = p_rt->ch_mask; 341 enable_ch.enable = en; 342 343 /* Perform Master port channel(s) enable/disable */ 344 if (bus->port_ops->dpn_port_enable_ch) { 345 ret = bus->port_ops->dpn_port_enable_ch(bus, 346 &enable_ch, 347 bus->params.next_bank); 348 if (ret < 0) { 349 dev_err(bus->dev, 350 "Master chn_en write failed:%d port:%d\n", 351 ret, t_params->port_num); 352 return ret; 353 } 354 } else { 355 dev_err(bus->dev, 356 "dpn_port_enable_ch not supported, %s failed\n", 357 en ? "enable" : "disable"); 358 return -EINVAL; 359 } 360 361 return 0; 362 } 363 364 /** 365 * sdw_enable_disable_ports() - Enable/disable port(s) for Master and 366 * Slave(s) 367 * 368 * @m_rt: Master stream runtime 369 * @en: mode (enable/disable) 370 */ 371 static int sdw_enable_disable_ports(struct sdw_master_runtime *m_rt, bool en) 372 { 373 struct sdw_port_runtime *s_port, *m_port; 374 struct sdw_slave_runtime *s_rt; 375 int ret = 0; 376 377 /* Enable/Disable Slave port(s) */ 378 list_for_each_entry(s_rt, &m_rt->slave_rt_list, m_rt_node) { 379 list_for_each_entry(s_port, &s_rt->port_list, port_node) { 380 ret = sdw_enable_disable_slave_ports(m_rt->bus, s_rt, 381 s_port, en); 382 if (ret < 0) 383 return ret; 384 } 385 } 386 387 /* Enable/Disable Master port(s) */ 388 list_for_each_entry(m_port, &m_rt->port_list, port_node) { 389 ret = sdw_enable_disable_master_ports(m_rt, m_port, en); 390 if (ret < 0) 391 return ret; 392 } 393 394 return 0; 395 } 396 397 static int sdw_do_port_prep(struct sdw_slave_runtime *s_rt, 398 struct sdw_prepare_ch prep_ch, 399 enum sdw_port_prep_ops cmd) 400 { 401 const struct sdw_slave_ops *ops = s_rt->slave->ops; 402 int ret; 403 404 if (ops->port_prep) { 405 ret = ops->port_prep(s_rt->slave, &prep_ch, cmd); 406 if (ret < 0) { 407 dev_err(&s_rt->slave->dev, 408 "Slave Port Prep cmd %d failed: %d\n", 409 cmd, ret); 410 return ret; 411 } 412 } 413 414 return 0; 415 } 416 417 static int sdw_prep_deprep_slave_ports(struct sdw_bus *bus, 418 struct sdw_slave_runtime *s_rt, 419 struct sdw_port_runtime *p_rt, 420 bool prep) 421 { 422 struct completion *port_ready; 423 struct sdw_dpn_prop *dpn_prop; 424 struct sdw_prepare_ch prep_ch; 425 bool intr = false; 426 int ret = 0, val; 427 u32 addr; 428 429 prep_ch.num = p_rt->num; 430 prep_ch.ch_mask = p_rt->ch_mask; 431 432 dpn_prop = sdw_get_slave_dpn_prop(s_rt->slave, 433 s_rt->direction, 434 prep_ch.num); 435 if (!dpn_prop) { 436 dev_err(bus->dev, 437 "Slave Port:%d properties not found\n", prep_ch.num); 438 return -EINVAL; 439 } 440 441 prep_ch.prepare = prep; 442 443 prep_ch.bank = bus->params.next_bank; 444 445 if (dpn_prop->imp_def_interrupts || !dpn_prop->simple_ch_prep_sm || 446 bus->params.s_data_mode != SDW_PORT_DATA_MODE_NORMAL) 447 intr = true; 448 449 /* 450 * Enable interrupt before Port prepare. 451 * For Port de-prepare, it is assumed that port 452 * was prepared earlier 453 */ 454 if (prep && intr) { 455 ret = sdw_configure_dpn_intr(s_rt->slave, p_rt->num, prep, 456 dpn_prop->imp_def_interrupts); 457 if (ret < 0) 458 return ret; 459 } 460 461 /* Inform slave about the impending port prepare */ 462 sdw_do_port_prep(s_rt, prep_ch, SDW_OPS_PORT_PRE_PREP); 463 464 /* Prepare Slave port implementing CP_SM */ 465 if (!dpn_prop->simple_ch_prep_sm) { 466 addr = SDW_DPN_PREPARECTRL(p_rt->num); 467 468 if (prep) 469 ret = sdw_write(s_rt->slave, addr, p_rt->ch_mask); 470 else 471 ret = sdw_write(s_rt->slave, addr, 0x0); 472 473 if (ret < 0) { 474 dev_err(&s_rt->slave->dev, 475 "Slave prep_ctrl reg write failed\n"); 476 return ret; 477 } 478 479 /* Wait for completion on port ready */ 480 port_ready = &s_rt->slave->port_ready[prep_ch.num]; 481 wait_for_completion_timeout(port_ready, 482 msecs_to_jiffies(dpn_prop->ch_prep_timeout)); 483 484 val = sdw_read(s_rt->slave, SDW_DPN_PREPARESTATUS(p_rt->num)); 485 if ((val < 0) || (val & p_rt->ch_mask)) { 486 ret = (val < 0) ? val : -ETIMEDOUT; 487 dev_err(&s_rt->slave->dev, 488 "Chn prep failed for port %d: %d\n", prep_ch.num, ret); 489 return ret; 490 } 491 } 492 493 /* Inform slaves about ports prepared */ 494 sdw_do_port_prep(s_rt, prep_ch, SDW_OPS_PORT_POST_PREP); 495 496 /* Disable interrupt after Port de-prepare */ 497 if (!prep && intr) 498 ret = sdw_configure_dpn_intr(s_rt->slave, p_rt->num, prep, 499 dpn_prop->imp_def_interrupts); 500 501 return ret; 502 } 503 504 static int sdw_prep_deprep_master_ports(struct sdw_master_runtime *m_rt, 505 struct sdw_port_runtime *p_rt, 506 bool prep) 507 { 508 struct sdw_transport_params *t_params = &p_rt->transport_params; 509 struct sdw_bus *bus = m_rt->bus; 510 const struct sdw_master_port_ops *ops = bus->port_ops; 511 struct sdw_prepare_ch prep_ch; 512 int ret = 0; 513 514 prep_ch.num = p_rt->num; 515 prep_ch.ch_mask = p_rt->ch_mask; 516 prep_ch.prepare = prep; /* Prepare/De-prepare */ 517 prep_ch.bank = bus->params.next_bank; 518 519 /* Pre-prepare/Pre-deprepare port(s) */ 520 if (ops->dpn_port_prep) { 521 ret = ops->dpn_port_prep(bus, &prep_ch); 522 if (ret < 0) { 523 dev_err(bus->dev, "Port prepare failed for port:%d\n", 524 t_params->port_num); 525 return ret; 526 } 527 } 528 529 return ret; 530 } 531 532 /** 533 * sdw_prep_deprep_ports() - Prepare/De-prepare port(s) for Master(s) and 534 * Slave(s) 535 * 536 * @m_rt: Master runtime handle 537 * @prep: Prepare or De-prepare 538 */ 539 static int sdw_prep_deprep_ports(struct sdw_master_runtime *m_rt, bool prep) 540 { 541 struct sdw_slave_runtime *s_rt; 542 struct sdw_port_runtime *p_rt; 543 int ret = 0; 544 545 /* Prepare/De-prepare Slave port(s) */ 546 list_for_each_entry(s_rt, &m_rt->slave_rt_list, m_rt_node) { 547 list_for_each_entry(p_rt, &s_rt->port_list, port_node) { 548 ret = sdw_prep_deprep_slave_ports(m_rt->bus, s_rt, 549 p_rt, prep); 550 if (ret < 0) 551 return ret; 552 } 553 } 554 555 /* Prepare/De-prepare Master port(s) */ 556 list_for_each_entry(p_rt, &m_rt->port_list, port_node) { 557 ret = sdw_prep_deprep_master_ports(m_rt, p_rt, prep); 558 if (ret < 0) 559 return ret; 560 } 561 562 return ret; 563 } 564 565 /** 566 * sdw_notify_config() - Notify bus configuration 567 * 568 * @m_rt: Master runtime handle 569 * 570 * This function notifies the Master(s) and Slave(s) of the 571 * new bus configuration. 572 */ 573 static int sdw_notify_config(struct sdw_master_runtime *m_rt) 574 { 575 struct sdw_slave_runtime *s_rt; 576 struct sdw_bus *bus = m_rt->bus; 577 struct sdw_slave *slave; 578 int ret = 0; 579 580 if (bus->ops->set_bus_conf) { 581 ret = bus->ops->set_bus_conf(bus, &bus->params); 582 if (ret < 0) 583 return ret; 584 } 585 586 list_for_each_entry(s_rt, &m_rt->slave_rt_list, m_rt_node) { 587 slave = s_rt->slave; 588 589 if (slave->ops->bus_config) { 590 ret = slave->ops->bus_config(slave, &bus->params); 591 if (ret < 0) { 592 dev_err(bus->dev, "Notify Slave: %d failed\n", 593 slave->dev_num); 594 return ret; 595 } 596 } 597 } 598 599 return ret; 600 } 601 602 /** 603 * sdw_program_params() - Program transport and port parameters for Master(s) 604 * and Slave(s) 605 * 606 * @bus: SDW bus instance 607 * @prepare: true if sdw_program_params() is called by _prepare. 608 */ 609 static int sdw_program_params(struct sdw_bus *bus, bool prepare) 610 { 611 struct sdw_master_runtime *m_rt; 612 int ret = 0; 613 614 list_for_each_entry(m_rt, &bus->m_rt_list, bus_node) { 615 616 /* 617 * this loop walks through all master runtimes for a 618 * bus, but the ports can only be configured while 619 * explicitly preparing a stream or handling an 620 * already-prepared stream otherwise. 621 */ 622 if (!prepare && 623 m_rt->stream->state == SDW_STREAM_CONFIGURED) 624 continue; 625 626 ret = sdw_program_port_params(m_rt); 627 if (ret < 0) { 628 dev_err(bus->dev, 629 "Program transport params failed: %d\n", ret); 630 return ret; 631 } 632 633 ret = sdw_notify_config(m_rt); 634 if (ret < 0) { 635 dev_err(bus->dev, 636 "Notify bus config failed: %d\n", ret); 637 return ret; 638 } 639 640 /* Enable port(s) on alternate bank for all active streams */ 641 if (m_rt->stream->state != SDW_STREAM_ENABLED) 642 continue; 643 644 ret = sdw_enable_disable_ports(m_rt, true); 645 if (ret < 0) { 646 dev_err(bus->dev, "Enable channel failed: %d\n", ret); 647 return ret; 648 } 649 } 650 651 return ret; 652 } 653 654 static int sdw_bank_switch(struct sdw_bus *bus, int m_rt_count) 655 { 656 int col_index, row_index; 657 bool multi_link; 658 struct sdw_msg *wr_msg; 659 u8 *wbuf; 660 int ret; 661 u16 addr; 662 663 wr_msg = kzalloc(sizeof(*wr_msg), GFP_KERNEL); 664 if (!wr_msg) 665 return -ENOMEM; 666 667 bus->defer_msg.msg = wr_msg; 668 669 wbuf = kzalloc(sizeof(*wbuf), GFP_KERNEL); 670 if (!wbuf) { 671 ret = -ENOMEM; 672 goto error_1; 673 } 674 675 /* Get row and column index to program register */ 676 col_index = sdw_find_col_index(bus->params.col); 677 row_index = sdw_find_row_index(bus->params.row); 678 wbuf[0] = col_index | (row_index << 3); 679 680 if (bus->params.next_bank) 681 addr = SDW_SCP_FRAMECTRL_B1; 682 else 683 addr = SDW_SCP_FRAMECTRL_B0; 684 685 sdw_fill_msg(wr_msg, NULL, addr, 1, SDW_BROADCAST_DEV_NUM, 686 SDW_MSG_FLAG_WRITE, wbuf); 687 wr_msg->ssp_sync = true; 688 689 /* 690 * Set the multi_link flag only when both the hardware supports 691 * and hardware-based sync is required 692 */ 693 multi_link = bus->multi_link && (m_rt_count >= bus->hw_sync_min_links); 694 695 if (multi_link) 696 ret = sdw_transfer_defer(bus, wr_msg, &bus->defer_msg); 697 else 698 ret = sdw_transfer(bus, wr_msg); 699 700 if (ret < 0) { 701 dev_err(bus->dev, "Slave frame_ctrl reg write failed\n"); 702 goto error; 703 } 704 705 if (!multi_link) { 706 kfree(wr_msg); 707 kfree(wbuf); 708 bus->defer_msg.msg = NULL; 709 bus->params.curr_bank = !bus->params.curr_bank; 710 bus->params.next_bank = !bus->params.next_bank; 711 } 712 713 return 0; 714 715 error: 716 kfree(wbuf); 717 error_1: 718 kfree(wr_msg); 719 bus->defer_msg.msg = NULL; 720 return ret; 721 } 722 723 /** 724 * sdw_ml_sync_bank_switch: Multilink register bank switch 725 * 726 * @bus: SDW bus instance 727 * 728 * Caller function should free the buffers on error 729 */ 730 static int sdw_ml_sync_bank_switch(struct sdw_bus *bus) 731 { 732 unsigned long time_left; 733 734 if (!bus->multi_link) 735 return 0; 736 737 /* Wait for completion of transfer */ 738 time_left = wait_for_completion_timeout(&bus->defer_msg.complete, 739 bus->bank_switch_timeout); 740 741 if (!time_left) { 742 dev_err(bus->dev, "Controller Timed out on bank switch\n"); 743 return -ETIMEDOUT; 744 } 745 746 bus->params.curr_bank = !bus->params.curr_bank; 747 bus->params.next_bank = !bus->params.next_bank; 748 749 if (bus->defer_msg.msg) { 750 kfree(bus->defer_msg.msg->buf); 751 kfree(bus->defer_msg.msg); 752 } 753 754 return 0; 755 } 756 757 static int do_bank_switch(struct sdw_stream_runtime *stream) 758 { 759 struct sdw_master_runtime *m_rt; 760 const struct sdw_master_ops *ops; 761 struct sdw_bus *bus; 762 bool multi_link = false; 763 int m_rt_count; 764 int ret = 0; 765 766 m_rt_count = stream->m_rt_count; 767 768 list_for_each_entry(m_rt, &stream->master_list, stream_node) { 769 bus = m_rt->bus; 770 ops = bus->ops; 771 772 if (bus->multi_link && m_rt_count >= bus->hw_sync_min_links) { 773 multi_link = true; 774 mutex_lock(&bus->msg_lock); 775 } 776 777 /* Pre-bank switch */ 778 if (ops->pre_bank_switch) { 779 ret = ops->pre_bank_switch(bus); 780 if (ret < 0) { 781 dev_err(bus->dev, 782 "Pre bank switch op failed: %d\n", ret); 783 goto msg_unlock; 784 } 785 } 786 787 /* 788 * Perform Bank switch operation. 789 * For multi link cases, the actual bank switch is 790 * synchronized across all Masters and happens later as a 791 * part of post_bank_switch ops. 792 */ 793 ret = sdw_bank_switch(bus, m_rt_count); 794 if (ret < 0) { 795 dev_err(bus->dev, "Bank switch failed: %d\n", ret); 796 goto error; 797 } 798 } 799 800 /* 801 * For multi link cases, it is expected that the bank switch is 802 * triggered by the post_bank_switch for the first Master in the list 803 * and for the other Masters the post_bank_switch() should return doing 804 * nothing. 805 */ 806 list_for_each_entry(m_rt, &stream->master_list, stream_node) { 807 bus = m_rt->bus; 808 ops = bus->ops; 809 810 /* Post-bank switch */ 811 if (ops->post_bank_switch) { 812 ret = ops->post_bank_switch(bus); 813 if (ret < 0) { 814 dev_err(bus->dev, 815 "Post bank switch op failed: %d\n", 816 ret); 817 goto error; 818 } 819 } else if (multi_link) { 820 dev_err(bus->dev, 821 "Post bank switch ops not implemented\n"); 822 goto error; 823 } 824 825 /* Set the bank switch timeout to default, if not set */ 826 if (!bus->bank_switch_timeout) 827 bus->bank_switch_timeout = DEFAULT_BANK_SWITCH_TIMEOUT; 828 829 /* Check if bank switch was successful */ 830 ret = sdw_ml_sync_bank_switch(bus); 831 if (ret < 0) { 832 dev_err(bus->dev, 833 "multi link bank switch failed: %d\n", ret); 834 goto error; 835 } 836 837 if (multi_link) 838 mutex_unlock(&bus->msg_lock); 839 } 840 841 return ret; 842 843 error: 844 list_for_each_entry(m_rt, &stream->master_list, stream_node) { 845 bus = m_rt->bus; 846 if (bus->defer_msg.msg) { 847 kfree(bus->defer_msg.msg->buf); 848 kfree(bus->defer_msg.msg); 849 } 850 } 851 852 msg_unlock: 853 854 if (multi_link) { 855 list_for_each_entry(m_rt, &stream->master_list, stream_node) { 856 bus = m_rt->bus; 857 if (mutex_is_locked(&bus->msg_lock)) 858 mutex_unlock(&bus->msg_lock); 859 } 860 } 861 862 return ret; 863 } 864 865 /** 866 * sdw_release_stream() - Free the assigned stream runtime 867 * 868 * @stream: SoundWire stream runtime 869 * 870 * sdw_release_stream should be called only once per stream 871 */ 872 void sdw_release_stream(struct sdw_stream_runtime *stream) 873 { 874 kfree(stream); 875 } 876 EXPORT_SYMBOL(sdw_release_stream); 877 878 /** 879 * sdw_alloc_stream() - Allocate and return stream runtime 880 * 881 * @stream_name: SoundWire stream name 882 * 883 * Allocates a SoundWire stream runtime instance. 884 * sdw_alloc_stream should be called only once per stream. Typically 885 * invoked from ALSA/ASoC machine/platform driver. 886 */ 887 struct sdw_stream_runtime *sdw_alloc_stream(const char *stream_name) 888 { 889 struct sdw_stream_runtime *stream; 890 891 stream = kzalloc(sizeof(*stream), GFP_KERNEL); 892 if (!stream) 893 return NULL; 894 895 stream->name = stream_name; 896 INIT_LIST_HEAD(&stream->master_list); 897 stream->state = SDW_STREAM_ALLOCATED; 898 stream->m_rt_count = 0; 899 900 return stream; 901 } 902 EXPORT_SYMBOL(sdw_alloc_stream); 903 904 static struct sdw_master_runtime 905 *sdw_find_master_rt(struct sdw_bus *bus, 906 struct sdw_stream_runtime *stream) 907 { 908 struct sdw_master_runtime *m_rt; 909 910 /* Retrieve Bus handle if already available */ 911 list_for_each_entry(m_rt, &stream->master_list, stream_node) { 912 if (m_rt->bus == bus) 913 return m_rt; 914 } 915 916 return NULL; 917 } 918 919 /** 920 * sdw_alloc_master_rt() - Allocates and initialize Master runtime handle 921 * 922 * @bus: SDW bus instance 923 * @stream_config: Stream configuration 924 * @stream: Stream runtime handle. 925 * 926 * This function is to be called with bus_lock held. 927 */ 928 static struct sdw_master_runtime 929 *sdw_alloc_master_rt(struct sdw_bus *bus, 930 struct sdw_stream_config *stream_config, 931 struct sdw_stream_runtime *stream) 932 { 933 struct sdw_master_runtime *m_rt; 934 935 /* 936 * check if Master is already allocated (as a result of Slave adding 937 * it first), if so skip allocation and go to configure 938 */ 939 m_rt = sdw_find_master_rt(bus, stream); 940 if (m_rt) 941 goto stream_config; 942 943 m_rt = kzalloc(sizeof(*m_rt), GFP_KERNEL); 944 if (!m_rt) 945 return NULL; 946 947 /* Initialization of Master runtime handle */ 948 INIT_LIST_HEAD(&m_rt->port_list); 949 INIT_LIST_HEAD(&m_rt->slave_rt_list); 950 list_add_tail(&m_rt->stream_node, &stream->master_list); 951 952 list_add_tail(&m_rt->bus_node, &bus->m_rt_list); 953 954 stream_config: 955 m_rt->ch_count = stream_config->ch_count; 956 m_rt->bus = bus; 957 m_rt->stream = stream; 958 m_rt->direction = stream_config->direction; 959 960 return m_rt; 961 } 962 963 /** 964 * sdw_alloc_slave_rt() - Allocate and initialize Slave runtime handle. 965 * 966 * @slave: Slave handle 967 * @stream_config: Stream configuration 968 * @stream: Stream runtime handle 969 * 970 * This function is to be called with bus_lock held. 971 */ 972 static struct sdw_slave_runtime 973 *sdw_alloc_slave_rt(struct sdw_slave *slave, 974 struct sdw_stream_config *stream_config, 975 struct sdw_stream_runtime *stream) 976 { 977 struct sdw_slave_runtime *s_rt; 978 979 s_rt = kzalloc(sizeof(*s_rt), GFP_KERNEL); 980 if (!s_rt) 981 return NULL; 982 983 INIT_LIST_HEAD(&s_rt->port_list); 984 s_rt->ch_count = stream_config->ch_count; 985 s_rt->direction = stream_config->direction; 986 s_rt->slave = slave; 987 988 return s_rt; 989 } 990 991 static void sdw_master_port_release(struct sdw_bus *bus, 992 struct sdw_master_runtime *m_rt) 993 { 994 struct sdw_port_runtime *p_rt, *_p_rt; 995 996 list_for_each_entry_safe(p_rt, _p_rt, &m_rt->port_list, port_node) { 997 list_del(&p_rt->port_node); 998 kfree(p_rt); 999 } 1000 } 1001 1002 static void sdw_slave_port_release(struct sdw_bus *bus, 1003 struct sdw_slave *slave, 1004 struct sdw_stream_runtime *stream) 1005 { 1006 struct sdw_port_runtime *p_rt, *_p_rt; 1007 struct sdw_master_runtime *m_rt; 1008 struct sdw_slave_runtime *s_rt; 1009 1010 list_for_each_entry(m_rt, &stream->master_list, stream_node) { 1011 list_for_each_entry(s_rt, &m_rt->slave_rt_list, m_rt_node) { 1012 if (s_rt->slave != slave) 1013 continue; 1014 1015 list_for_each_entry_safe(p_rt, _p_rt, 1016 &s_rt->port_list, port_node) { 1017 list_del(&p_rt->port_node); 1018 kfree(p_rt); 1019 } 1020 } 1021 } 1022 } 1023 1024 /** 1025 * sdw_release_slave_stream() - Free Slave(s) runtime handle 1026 * 1027 * @slave: Slave handle. 1028 * @stream: Stream runtime handle. 1029 * 1030 * This function is to be called with bus_lock held. 1031 */ 1032 static void sdw_release_slave_stream(struct sdw_slave *slave, 1033 struct sdw_stream_runtime *stream) 1034 { 1035 struct sdw_slave_runtime *s_rt, *_s_rt; 1036 struct sdw_master_runtime *m_rt; 1037 1038 list_for_each_entry(m_rt, &stream->master_list, stream_node) { 1039 /* Retrieve Slave runtime handle */ 1040 list_for_each_entry_safe(s_rt, _s_rt, 1041 &m_rt->slave_rt_list, m_rt_node) { 1042 if (s_rt->slave == slave) { 1043 list_del(&s_rt->m_rt_node); 1044 kfree(s_rt); 1045 return; 1046 } 1047 } 1048 } 1049 } 1050 1051 /** 1052 * sdw_release_master_stream() - Free Master runtime handle 1053 * 1054 * @m_rt: Master runtime node 1055 * @stream: Stream runtime handle. 1056 * 1057 * This function is to be called with bus_lock held 1058 * It frees the Master runtime handle and associated Slave(s) runtime 1059 * handle. If this is called first then sdw_release_slave_stream() will have 1060 * no effect as Slave(s) runtime handle would already be freed up. 1061 */ 1062 static void sdw_release_master_stream(struct sdw_master_runtime *m_rt, 1063 struct sdw_stream_runtime *stream) 1064 { 1065 struct sdw_slave_runtime *s_rt, *_s_rt; 1066 1067 list_for_each_entry_safe(s_rt, _s_rt, &m_rt->slave_rt_list, m_rt_node) { 1068 sdw_slave_port_release(s_rt->slave->bus, s_rt->slave, stream); 1069 sdw_release_slave_stream(s_rt->slave, stream); 1070 } 1071 1072 list_del(&m_rt->stream_node); 1073 list_del(&m_rt->bus_node); 1074 kfree(m_rt); 1075 } 1076 1077 /** 1078 * sdw_stream_remove_master() - Remove master from sdw_stream 1079 * 1080 * @bus: SDW Bus instance 1081 * @stream: SoundWire stream 1082 * 1083 * This removes and frees port_rt and master_rt from a stream 1084 */ 1085 int sdw_stream_remove_master(struct sdw_bus *bus, 1086 struct sdw_stream_runtime *stream) 1087 { 1088 struct sdw_master_runtime *m_rt, *_m_rt; 1089 1090 mutex_lock(&bus->bus_lock); 1091 1092 list_for_each_entry_safe(m_rt, _m_rt, 1093 &stream->master_list, stream_node) { 1094 if (m_rt->bus != bus) 1095 continue; 1096 1097 sdw_master_port_release(bus, m_rt); 1098 sdw_release_master_stream(m_rt, stream); 1099 stream->m_rt_count--; 1100 } 1101 1102 if (list_empty(&stream->master_list)) 1103 stream->state = SDW_STREAM_RELEASED; 1104 1105 mutex_unlock(&bus->bus_lock); 1106 1107 return 0; 1108 } 1109 EXPORT_SYMBOL(sdw_stream_remove_master); 1110 1111 /** 1112 * sdw_stream_remove_slave() - Remove slave from sdw_stream 1113 * 1114 * @slave: SDW Slave instance 1115 * @stream: SoundWire stream 1116 * 1117 * This removes and frees port_rt and slave_rt from a stream 1118 */ 1119 int sdw_stream_remove_slave(struct sdw_slave *slave, 1120 struct sdw_stream_runtime *stream) 1121 { 1122 mutex_lock(&slave->bus->bus_lock); 1123 1124 sdw_slave_port_release(slave->bus, slave, stream); 1125 sdw_release_slave_stream(slave, stream); 1126 1127 mutex_unlock(&slave->bus->bus_lock); 1128 1129 return 0; 1130 } 1131 EXPORT_SYMBOL(sdw_stream_remove_slave); 1132 1133 /** 1134 * sdw_config_stream() - Configure the allocated stream 1135 * 1136 * @dev: SDW device 1137 * @stream: SoundWire stream 1138 * @stream_config: Stream configuration for audio stream 1139 * @is_slave: is API called from Slave or Master 1140 * 1141 * This function is to be called with bus_lock held. 1142 */ 1143 static int sdw_config_stream(struct device *dev, 1144 struct sdw_stream_runtime *stream, 1145 struct sdw_stream_config *stream_config, 1146 bool is_slave) 1147 { 1148 /* 1149 * Update the stream rate, channel and bps based on data 1150 * source. For more than one data source (multilink), 1151 * match the rate, bps, stream type and increment number of channels. 1152 * 1153 * If rate/bps is zero, it means the values are not set, so skip 1154 * comparison and allow the value to be set and stored in stream 1155 */ 1156 if (stream->params.rate && 1157 stream->params.rate != stream_config->frame_rate) { 1158 dev_err(dev, "rate not matching, stream:%s\n", stream->name); 1159 return -EINVAL; 1160 } 1161 1162 if (stream->params.bps && 1163 stream->params.bps != stream_config->bps) { 1164 dev_err(dev, "bps not matching, stream:%s\n", stream->name); 1165 return -EINVAL; 1166 } 1167 1168 stream->type = stream_config->type; 1169 stream->params.rate = stream_config->frame_rate; 1170 stream->params.bps = stream_config->bps; 1171 1172 /* TODO: Update this check during Device-device support */ 1173 if (is_slave) 1174 stream->params.ch_count += stream_config->ch_count; 1175 1176 return 0; 1177 } 1178 1179 static int sdw_is_valid_port_range(struct device *dev, 1180 struct sdw_port_runtime *p_rt) 1181 { 1182 if (!SDW_VALID_PORT_RANGE(p_rt->num)) { 1183 dev_err(dev, 1184 "SoundWire: Invalid port number :%d\n", p_rt->num); 1185 return -EINVAL; 1186 } 1187 1188 return 0; 1189 } 1190 1191 static struct sdw_port_runtime 1192 *sdw_port_alloc(struct device *dev, 1193 struct sdw_port_config *port_config, 1194 int port_index) 1195 { 1196 struct sdw_port_runtime *p_rt; 1197 1198 p_rt = kzalloc(sizeof(*p_rt), GFP_KERNEL); 1199 if (!p_rt) 1200 return NULL; 1201 1202 p_rt->ch_mask = port_config[port_index].ch_mask; 1203 p_rt->num = port_config[port_index].num; 1204 1205 return p_rt; 1206 } 1207 1208 static int sdw_master_port_config(struct sdw_bus *bus, 1209 struct sdw_master_runtime *m_rt, 1210 struct sdw_port_config *port_config, 1211 unsigned int num_ports) 1212 { 1213 struct sdw_port_runtime *p_rt; 1214 int i; 1215 1216 /* Iterate for number of ports to perform initialization */ 1217 for (i = 0; i < num_ports; i++) { 1218 p_rt = sdw_port_alloc(bus->dev, port_config, i); 1219 if (!p_rt) 1220 return -ENOMEM; 1221 1222 /* 1223 * TODO: Check port capabilities for requested 1224 * configuration (audio mode support) 1225 */ 1226 1227 list_add_tail(&p_rt->port_node, &m_rt->port_list); 1228 } 1229 1230 return 0; 1231 } 1232 1233 static int sdw_slave_port_config(struct sdw_slave *slave, 1234 struct sdw_slave_runtime *s_rt, 1235 struct sdw_port_config *port_config, 1236 unsigned int num_config) 1237 { 1238 struct sdw_port_runtime *p_rt; 1239 int i, ret; 1240 1241 /* Iterate for number of ports to perform initialization */ 1242 for (i = 0; i < num_config; i++) { 1243 p_rt = sdw_port_alloc(&slave->dev, port_config, i); 1244 if (!p_rt) 1245 return -ENOMEM; 1246 1247 /* 1248 * TODO: Check valid port range as defined by DisCo/ 1249 * slave 1250 */ 1251 ret = sdw_is_valid_port_range(&slave->dev, p_rt); 1252 if (ret < 0) { 1253 kfree(p_rt); 1254 return ret; 1255 } 1256 1257 /* 1258 * TODO: Check port capabilities for requested 1259 * configuration (audio mode support) 1260 */ 1261 1262 list_add_tail(&p_rt->port_node, &s_rt->port_list); 1263 } 1264 1265 return 0; 1266 } 1267 1268 /** 1269 * sdw_stream_add_master() - Allocate and add master runtime to a stream 1270 * 1271 * @bus: SDW Bus instance 1272 * @stream_config: Stream configuration for audio stream 1273 * @port_config: Port configuration for audio stream 1274 * @num_ports: Number of ports 1275 * @stream: SoundWire stream 1276 */ 1277 int sdw_stream_add_master(struct sdw_bus *bus, 1278 struct sdw_stream_config *stream_config, 1279 struct sdw_port_config *port_config, 1280 unsigned int num_ports, 1281 struct sdw_stream_runtime *stream) 1282 { 1283 struct sdw_master_runtime *m_rt; 1284 int ret; 1285 1286 mutex_lock(&bus->bus_lock); 1287 1288 /* 1289 * For multi link streams, add the second master only if 1290 * the bus supports it. 1291 * Check if bus->multi_link is set 1292 */ 1293 if (!bus->multi_link && stream->m_rt_count > 0) { 1294 dev_err(bus->dev, 1295 "Multilink not supported, link %d\n", bus->link_id); 1296 ret = -EINVAL; 1297 goto unlock; 1298 } 1299 1300 m_rt = sdw_alloc_master_rt(bus, stream_config, stream); 1301 if (!m_rt) { 1302 dev_err(bus->dev, 1303 "Master runtime config failed for stream:%s\n", 1304 stream->name); 1305 ret = -ENOMEM; 1306 goto unlock; 1307 } 1308 1309 ret = sdw_config_stream(bus->dev, stream, stream_config, false); 1310 if (ret) 1311 goto stream_error; 1312 1313 ret = sdw_master_port_config(bus, m_rt, port_config, num_ports); 1314 if (ret) 1315 goto stream_error; 1316 1317 stream->m_rt_count++; 1318 1319 goto unlock; 1320 1321 stream_error: 1322 sdw_release_master_stream(m_rt, stream); 1323 unlock: 1324 mutex_unlock(&bus->bus_lock); 1325 return ret; 1326 } 1327 EXPORT_SYMBOL(sdw_stream_add_master); 1328 1329 /** 1330 * sdw_stream_add_slave() - Allocate and add master/slave runtime to a stream 1331 * 1332 * @slave: SDW Slave instance 1333 * @stream_config: Stream configuration for audio stream 1334 * @stream: SoundWire stream 1335 * @port_config: Port configuration for audio stream 1336 * @num_ports: Number of ports 1337 * 1338 * It is expected that Slave is added before adding Master 1339 * to the Stream. 1340 * 1341 */ 1342 int sdw_stream_add_slave(struct sdw_slave *slave, 1343 struct sdw_stream_config *stream_config, 1344 struct sdw_port_config *port_config, 1345 unsigned int num_ports, 1346 struct sdw_stream_runtime *stream) 1347 { 1348 struct sdw_slave_runtime *s_rt; 1349 struct sdw_master_runtime *m_rt; 1350 int ret; 1351 1352 mutex_lock(&slave->bus->bus_lock); 1353 1354 /* 1355 * If this API is invoked by Slave first then m_rt is not valid. 1356 * So, allocate m_rt and add Slave to it. 1357 */ 1358 m_rt = sdw_alloc_master_rt(slave->bus, stream_config, stream); 1359 if (!m_rt) { 1360 dev_err(&slave->dev, 1361 "alloc master runtime failed for stream:%s\n", 1362 stream->name); 1363 ret = -ENOMEM; 1364 goto error; 1365 } 1366 1367 s_rt = sdw_alloc_slave_rt(slave, stream_config, stream); 1368 if (!s_rt) { 1369 dev_err(&slave->dev, 1370 "Slave runtime config failed for stream:%s\n", 1371 stream->name); 1372 ret = -ENOMEM; 1373 goto stream_error; 1374 } 1375 1376 ret = sdw_config_stream(&slave->dev, stream, stream_config, true); 1377 if (ret) { 1378 /* 1379 * sdw_release_master_stream will release s_rt in slave_rt_list in 1380 * stream_error case, but s_rt is only added to slave_rt_list 1381 * when sdw_config_stream is successful, so free s_rt explicitly 1382 * when sdw_config_stream is failed. 1383 */ 1384 kfree(s_rt); 1385 goto stream_error; 1386 } 1387 1388 list_add_tail(&s_rt->m_rt_node, &m_rt->slave_rt_list); 1389 1390 ret = sdw_slave_port_config(slave, s_rt, port_config, num_ports); 1391 if (ret) 1392 goto stream_error; 1393 1394 /* 1395 * Change stream state to CONFIGURED on first Slave add. 1396 * Bus is not aware of number of Slave(s) in a stream at this 1397 * point so cannot depend on all Slave(s) to be added in order to 1398 * change stream state to CONFIGURED. 1399 */ 1400 stream->state = SDW_STREAM_CONFIGURED; 1401 goto error; 1402 1403 stream_error: 1404 /* 1405 * we hit error so cleanup the stream, release all Slave(s) and 1406 * Master runtime 1407 */ 1408 sdw_release_master_stream(m_rt, stream); 1409 error: 1410 mutex_unlock(&slave->bus->bus_lock); 1411 return ret; 1412 } 1413 EXPORT_SYMBOL(sdw_stream_add_slave); 1414 1415 /** 1416 * sdw_get_slave_dpn_prop() - Get Slave port capabilities 1417 * 1418 * @slave: Slave handle 1419 * @direction: Data direction. 1420 * @port_num: Port number 1421 */ 1422 struct sdw_dpn_prop *sdw_get_slave_dpn_prop(struct sdw_slave *slave, 1423 enum sdw_data_direction direction, 1424 unsigned int port_num) 1425 { 1426 struct sdw_dpn_prop *dpn_prop; 1427 u8 num_ports; 1428 int i; 1429 1430 if (direction == SDW_DATA_DIR_TX) { 1431 num_ports = hweight32(slave->prop.source_ports); 1432 dpn_prop = slave->prop.src_dpn_prop; 1433 } else { 1434 num_ports = hweight32(slave->prop.sink_ports); 1435 dpn_prop = slave->prop.sink_dpn_prop; 1436 } 1437 1438 for (i = 0; i < num_ports; i++) { 1439 if (dpn_prop[i].num == port_num) 1440 return &dpn_prop[i]; 1441 } 1442 1443 return NULL; 1444 } 1445 1446 /** 1447 * sdw_acquire_bus_lock: Acquire bus lock for all Master runtime(s) 1448 * 1449 * @stream: SoundWire stream 1450 * 1451 * Acquire bus_lock for each of the master runtime(m_rt) part of this 1452 * stream to reconfigure the bus. 1453 * NOTE: This function is called from SoundWire stream ops and is 1454 * expected that a global lock is held before acquiring bus_lock. 1455 */ 1456 static void sdw_acquire_bus_lock(struct sdw_stream_runtime *stream) 1457 { 1458 struct sdw_master_runtime *m_rt; 1459 struct sdw_bus *bus; 1460 1461 /* Iterate for all Master(s) in Master list */ 1462 list_for_each_entry(m_rt, &stream->master_list, stream_node) { 1463 bus = m_rt->bus; 1464 1465 mutex_lock(&bus->bus_lock); 1466 } 1467 } 1468 1469 /** 1470 * sdw_release_bus_lock: Release bus lock for all Master runtime(s) 1471 * 1472 * @stream: SoundWire stream 1473 * 1474 * Release the previously held bus_lock after reconfiguring the bus. 1475 * NOTE: This function is called from SoundWire stream ops and is 1476 * expected that a global lock is held before releasing bus_lock. 1477 */ 1478 static void sdw_release_bus_lock(struct sdw_stream_runtime *stream) 1479 { 1480 struct sdw_master_runtime *m_rt; 1481 struct sdw_bus *bus; 1482 1483 /* Iterate for all Master(s) in Master list */ 1484 list_for_each_entry_reverse(m_rt, &stream->master_list, stream_node) { 1485 bus = m_rt->bus; 1486 mutex_unlock(&bus->bus_lock); 1487 } 1488 } 1489 1490 static int _sdw_prepare_stream(struct sdw_stream_runtime *stream, 1491 bool update_params) 1492 { 1493 struct sdw_master_runtime *m_rt; 1494 struct sdw_bus *bus = NULL; 1495 struct sdw_master_prop *prop; 1496 struct sdw_bus_params params; 1497 int ret; 1498 1499 /* Prepare Master(s) and Slave(s) port(s) associated with stream */ 1500 list_for_each_entry(m_rt, &stream->master_list, stream_node) { 1501 bus = m_rt->bus; 1502 prop = &bus->prop; 1503 memcpy(¶ms, &bus->params, sizeof(params)); 1504 1505 /* TODO: Support Asynchronous mode */ 1506 if ((prop->max_clk_freq % stream->params.rate) != 0) { 1507 dev_err(bus->dev, "Async mode not supported\n"); 1508 return -EINVAL; 1509 } 1510 1511 if (!update_params) 1512 goto program_params; 1513 1514 /* Increment cumulative bus bandwidth */ 1515 /* TODO: Update this during Device-Device support */ 1516 bus->params.bandwidth += m_rt->stream->params.rate * 1517 m_rt->ch_count * m_rt->stream->params.bps; 1518 1519 /* Compute params */ 1520 if (bus->compute_params) { 1521 ret = bus->compute_params(bus); 1522 if (ret < 0) { 1523 dev_err(bus->dev, "Compute params failed: %d\n", 1524 ret); 1525 return ret; 1526 } 1527 } 1528 1529 program_params: 1530 /* Program params */ 1531 ret = sdw_program_params(bus, true); 1532 if (ret < 0) { 1533 dev_err(bus->dev, "Program params failed: %d\n", ret); 1534 goto restore_params; 1535 } 1536 } 1537 1538 if (!bus) { 1539 pr_err("Configuration error in %s\n", __func__); 1540 return -EINVAL; 1541 } 1542 1543 ret = do_bank_switch(stream); 1544 if (ret < 0) { 1545 dev_err(bus->dev, "Bank switch failed: %d\n", ret); 1546 goto restore_params; 1547 } 1548 1549 list_for_each_entry(m_rt, &stream->master_list, stream_node) { 1550 bus = m_rt->bus; 1551 1552 /* Prepare port(s) on the new clock configuration */ 1553 ret = sdw_prep_deprep_ports(m_rt, true); 1554 if (ret < 0) { 1555 dev_err(bus->dev, "Prepare port(s) failed ret = %d\n", 1556 ret); 1557 return ret; 1558 } 1559 } 1560 1561 stream->state = SDW_STREAM_PREPARED; 1562 1563 return ret; 1564 1565 restore_params: 1566 memcpy(&bus->params, ¶ms, sizeof(params)); 1567 return ret; 1568 } 1569 1570 /** 1571 * sdw_prepare_stream() - Prepare SoundWire stream 1572 * 1573 * @stream: Soundwire stream 1574 * 1575 * Documentation/driver-api/soundwire/stream.rst explains this API in detail 1576 */ 1577 int sdw_prepare_stream(struct sdw_stream_runtime *stream) 1578 { 1579 bool update_params = true; 1580 int ret; 1581 1582 if (!stream) { 1583 pr_err("SoundWire: Handle not found for stream\n"); 1584 return -EINVAL; 1585 } 1586 1587 sdw_acquire_bus_lock(stream); 1588 1589 if (stream->state == SDW_STREAM_PREPARED) { 1590 ret = 0; 1591 goto state_err; 1592 } 1593 1594 if (stream->state != SDW_STREAM_CONFIGURED && 1595 stream->state != SDW_STREAM_DEPREPARED && 1596 stream->state != SDW_STREAM_DISABLED) { 1597 pr_err("%s: %s: inconsistent state state %d\n", 1598 __func__, stream->name, stream->state); 1599 ret = -EINVAL; 1600 goto state_err; 1601 } 1602 1603 /* 1604 * when the stream is DISABLED, this means sdw_prepare_stream() 1605 * is called as a result of an underflow or a resume operation. 1606 * In this case, the bus parameters shall not be recomputed, but 1607 * still need to be re-applied 1608 */ 1609 if (stream->state == SDW_STREAM_DISABLED) 1610 update_params = false; 1611 1612 ret = _sdw_prepare_stream(stream, update_params); 1613 1614 state_err: 1615 sdw_release_bus_lock(stream); 1616 return ret; 1617 } 1618 EXPORT_SYMBOL(sdw_prepare_stream); 1619 1620 static int _sdw_enable_stream(struct sdw_stream_runtime *stream) 1621 { 1622 struct sdw_master_runtime *m_rt; 1623 struct sdw_bus *bus = NULL; 1624 int ret; 1625 1626 /* Enable Master(s) and Slave(s) port(s) associated with stream */ 1627 list_for_each_entry(m_rt, &stream->master_list, stream_node) { 1628 bus = m_rt->bus; 1629 1630 /* Program params */ 1631 ret = sdw_program_params(bus, false); 1632 if (ret < 0) { 1633 dev_err(bus->dev, "Program params failed: %d\n", ret); 1634 return ret; 1635 } 1636 1637 /* Enable port(s) */ 1638 ret = sdw_enable_disable_ports(m_rt, true); 1639 if (ret < 0) { 1640 dev_err(bus->dev, 1641 "Enable port(s) failed ret: %d\n", ret); 1642 return ret; 1643 } 1644 } 1645 1646 if (!bus) { 1647 pr_err("Configuration error in %s\n", __func__); 1648 return -EINVAL; 1649 } 1650 1651 ret = do_bank_switch(stream); 1652 if (ret < 0) { 1653 dev_err(bus->dev, "Bank switch failed: %d\n", ret); 1654 return ret; 1655 } 1656 1657 stream->state = SDW_STREAM_ENABLED; 1658 return 0; 1659 } 1660 1661 /** 1662 * sdw_enable_stream() - Enable SoundWire stream 1663 * 1664 * @stream: Soundwire stream 1665 * 1666 * Documentation/driver-api/soundwire/stream.rst explains this API in detail 1667 */ 1668 int sdw_enable_stream(struct sdw_stream_runtime *stream) 1669 { 1670 int ret; 1671 1672 if (!stream) { 1673 pr_err("SoundWire: Handle not found for stream\n"); 1674 return -EINVAL; 1675 } 1676 1677 sdw_acquire_bus_lock(stream); 1678 1679 if (stream->state != SDW_STREAM_PREPARED && 1680 stream->state != SDW_STREAM_DISABLED) { 1681 pr_err("%s: %s: inconsistent state state %d\n", 1682 __func__, stream->name, stream->state); 1683 ret = -EINVAL; 1684 goto state_err; 1685 } 1686 1687 ret = _sdw_enable_stream(stream); 1688 1689 state_err: 1690 sdw_release_bus_lock(stream); 1691 return ret; 1692 } 1693 EXPORT_SYMBOL(sdw_enable_stream); 1694 1695 static int _sdw_disable_stream(struct sdw_stream_runtime *stream) 1696 { 1697 struct sdw_master_runtime *m_rt; 1698 int ret; 1699 1700 list_for_each_entry(m_rt, &stream->master_list, stream_node) { 1701 struct sdw_bus *bus = m_rt->bus; 1702 1703 /* Disable port(s) */ 1704 ret = sdw_enable_disable_ports(m_rt, false); 1705 if (ret < 0) { 1706 dev_err(bus->dev, "Disable port(s) failed: %d\n", ret); 1707 return ret; 1708 } 1709 } 1710 stream->state = SDW_STREAM_DISABLED; 1711 1712 list_for_each_entry(m_rt, &stream->master_list, stream_node) { 1713 struct sdw_bus *bus = m_rt->bus; 1714 1715 /* Program params */ 1716 ret = sdw_program_params(bus, false); 1717 if (ret < 0) { 1718 dev_err(bus->dev, "Program params failed: %d\n", ret); 1719 return ret; 1720 } 1721 } 1722 1723 ret = do_bank_switch(stream); 1724 if (ret < 0) { 1725 pr_err("Bank switch failed: %d\n", ret); 1726 return ret; 1727 } 1728 1729 /* make sure alternate bank (previous current) is also disabled */ 1730 list_for_each_entry(m_rt, &stream->master_list, stream_node) { 1731 struct sdw_bus *bus = m_rt->bus; 1732 1733 /* Disable port(s) */ 1734 ret = sdw_enable_disable_ports(m_rt, false); 1735 if (ret < 0) { 1736 dev_err(bus->dev, "Disable port(s) failed: %d\n", ret); 1737 return ret; 1738 } 1739 } 1740 1741 return 0; 1742 } 1743 1744 /** 1745 * sdw_disable_stream() - Disable SoundWire stream 1746 * 1747 * @stream: Soundwire stream 1748 * 1749 * Documentation/driver-api/soundwire/stream.rst explains this API in detail 1750 */ 1751 int sdw_disable_stream(struct sdw_stream_runtime *stream) 1752 { 1753 int ret; 1754 1755 if (!stream) { 1756 pr_err("SoundWire: Handle not found for stream\n"); 1757 return -EINVAL; 1758 } 1759 1760 sdw_acquire_bus_lock(stream); 1761 1762 if (stream->state != SDW_STREAM_ENABLED) { 1763 pr_err("%s: %s: inconsistent state state %d\n", 1764 __func__, stream->name, stream->state); 1765 ret = -EINVAL; 1766 goto state_err; 1767 } 1768 1769 ret = _sdw_disable_stream(stream); 1770 1771 state_err: 1772 sdw_release_bus_lock(stream); 1773 return ret; 1774 } 1775 EXPORT_SYMBOL(sdw_disable_stream); 1776 1777 static int _sdw_deprepare_stream(struct sdw_stream_runtime *stream) 1778 { 1779 struct sdw_master_runtime *m_rt; 1780 struct sdw_bus *bus; 1781 int ret = 0; 1782 1783 list_for_each_entry(m_rt, &stream->master_list, stream_node) { 1784 bus = m_rt->bus; 1785 /* De-prepare port(s) */ 1786 ret = sdw_prep_deprep_ports(m_rt, false); 1787 if (ret < 0) { 1788 dev_err(bus->dev, 1789 "De-prepare port(s) failed: %d\n", ret); 1790 return ret; 1791 } 1792 1793 /* TODO: Update this during Device-Device support */ 1794 bus->params.bandwidth -= m_rt->stream->params.rate * 1795 m_rt->ch_count * m_rt->stream->params.bps; 1796 1797 /* Compute params */ 1798 if (bus->compute_params) { 1799 ret = bus->compute_params(bus); 1800 if (ret < 0) { 1801 dev_err(bus->dev, "Compute params failed: %d\n", 1802 ret); 1803 return ret; 1804 } 1805 } 1806 1807 /* Program params */ 1808 ret = sdw_program_params(bus, false); 1809 if (ret < 0) { 1810 dev_err(bus->dev, "Program params failed: %d\n", ret); 1811 return ret; 1812 } 1813 } 1814 1815 stream->state = SDW_STREAM_DEPREPARED; 1816 return do_bank_switch(stream); 1817 } 1818 1819 /** 1820 * sdw_deprepare_stream() - Deprepare SoundWire stream 1821 * 1822 * @stream: Soundwire stream 1823 * 1824 * Documentation/driver-api/soundwire/stream.rst explains this API in detail 1825 */ 1826 int sdw_deprepare_stream(struct sdw_stream_runtime *stream) 1827 { 1828 int ret; 1829 1830 if (!stream) { 1831 pr_err("SoundWire: Handle not found for stream\n"); 1832 return -EINVAL; 1833 } 1834 1835 sdw_acquire_bus_lock(stream); 1836 1837 if (stream->state != SDW_STREAM_PREPARED && 1838 stream->state != SDW_STREAM_DISABLED) { 1839 pr_err("%s: %s: inconsistent state state %d\n", 1840 __func__, stream->name, stream->state); 1841 ret = -EINVAL; 1842 goto state_err; 1843 } 1844 1845 ret = _sdw_deprepare_stream(stream); 1846 1847 state_err: 1848 sdw_release_bus_lock(stream); 1849 return ret; 1850 } 1851 EXPORT_SYMBOL(sdw_deprepare_stream); 1852 1853 static int set_stream(struct snd_pcm_substream *substream, 1854 struct sdw_stream_runtime *sdw_stream) 1855 { 1856 struct snd_soc_pcm_runtime *rtd = substream->private_data; 1857 struct snd_soc_dai *dai; 1858 int ret = 0; 1859 int i; 1860 1861 /* Set stream pointer on all DAIs */ 1862 for_each_rtd_dais(rtd, i, dai) { 1863 ret = snd_soc_dai_set_sdw_stream(dai, sdw_stream, substream->stream); 1864 if (ret < 0) { 1865 dev_err(rtd->dev, "failed to set stream pointer on dai %s\n", dai->name); 1866 break; 1867 } 1868 } 1869 1870 return ret; 1871 } 1872 1873 /** 1874 * sdw_startup_stream() - Startup SoundWire stream 1875 * 1876 * @sdw_substream: Soundwire stream 1877 * 1878 * Documentation/driver-api/soundwire/stream.rst explains this API in detail 1879 */ 1880 int sdw_startup_stream(void *sdw_substream) 1881 { 1882 struct snd_pcm_substream *substream = sdw_substream; 1883 struct snd_soc_pcm_runtime *rtd = substream->private_data; 1884 struct sdw_stream_runtime *sdw_stream; 1885 char *name; 1886 int ret; 1887 1888 if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) 1889 name = kasprintf(GFP_KERNEL, "%s-Playback", substream->name); 1890 else 1891 name = kasprintf(GFP_KERNEL, "%s-Capture", substream->name); 1892 1893 if (!name) 1894 return -ENOMEM; 1895 1896 sdw_stream = sdw_alloc_stream(name); 1897 if (!sdw_stream) { 1898 dev_err(rtd->dev, "alloc stream failed for substream DAI %s\n", substream->name); 1899 ret = -ENOMEM; 1900 goto error; 1901 } 1902 1903 ret = set_stream(substream, sdw_stream); 1904 if (ret < 0) 1905 goto release_stream; 1906 return 0; 1907 1908 release_stream: 1909 sdw_release_stream(sdw_stream); 1910 set_stream(substream, NULL); 1911 error: 1912 kfree(name); 1913 return ret; 1914 } 1915 EXPORT_SYMBOL(sdw_startup_stream); 1916 1917 /** 1918 * sdw_shutdown_stream() - Shutdown SoundWire stream 1919 * 1920 * @sdw_substream: Soundwire stream 1921 * 1922 * Documentation/driver-api/soundwire/stream.rst explains this API in detail 1923 */ 1924 void sdw_shutdown_stream(void *sdw_substream) 1925 { 1926 struct snd_pcm_substream *substream = sdw_substream; 1927 struct snd_soc_pcm_runtime *rtd = substream->private_data; 1928 struct sdw_stream_runtime *sdw_stream; 1929 struct snd_soc_dai *dai; 1930 1931 /* Find stream from first CPU DAI */ 1932 dai = asoc_rtd_to_cpu(rtd, 0); 1933 1934 sdw_stream = snd_soc_dai_get_sdw_stream(dai, substream->stream); 1935 1936 if (IS_ERR(sdw_stream)) { 1937 dev_err(rtd->dev, "no stream found for DAI %s\n", dai->name); 1938 return; 1939 } 1940 1941 /* release memory */ 1942 kfree(sdw_stream->name); 1943 sdw_release_stream(sdw_stream); 1944 1945 /* clear DAI data */ 1946 set_stream(substream, NULL); 1947 } 1948 EXPORT_SYMBOL(sdw_shutdown_stream); 1949