xref: /openbmc/linux/drivers/soundwire/bus.h (revision de3a9980)
1 /* SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) */
2 /* Copyright(c) 2015-17 Intel Corporation. */
3 
4 #ifndef __SDW_BUS_H
5 #define __SDW_BUS_H
6 
7 #define DEFAULT_BANK_SWITCH_TIMEOUT 3000
8 #define DEFAULT_PROBE_TIMEOUT       2000
9 
10 #if IS_ENABLED(CONFIG_ACPI)
11 int sdw_acpi_find_slaves(struct sdw_bus *bus);
12 #else
13 static inline int sdw_acpi_find_slaves(struct sdw_bus *bus)
14 {
15 	return -ENOTSUPP;
16 }
17 #endif
18 
19 int sdw_of_find_slaves(struct sdw_bus *bus);
20 void sdw_extract_slave_id(struct sdw_bus *bus,
21 			  u64 addr, struct sdw_slave_id *id);
22 int sdw_slave_add(struct sdw_bus *bus, struct sdw_slave_id *id,
23 		  struct fwnode_handle *fwnode);
24 int sdw_master_device_add(struct sdw_bus *bus, struct device *parent,
25 			  struct fwnode_handle *fwnode);
26 int sdw_master_device_del(struct sdw_bus *bus);
27 
28 #ifdef CONFIG_DEBUG_FS
29 void sdw_bus_debugfs_init(struct sdw_bus *bus);
30 void sdw_bus_debugfs_exit(struct sdw_bus *bus);
31 void sdw_slave_debugfs_init(struct sdw_slave *slave);
32 void sdw_slave_debugfs_exit(struct sdw_slave *slave);
33 void sdw_debugfs_init(void);
34 void sdw_debugfs_exit(void);
35 #else
36 static inline void sdw_bus_debugfs_init(struct sdw_bus *bus) {}
37 static inline void sdw_bus_debugfs_exit(struct sdw_bus *bus) {}
38 static inline void sdw_slave_debugfs_init(struct sdw_slave *slave) {}
39 static inline void sdw_slave_debugfs_exit(struct sdw_slave *slave) {}
40 static inline void sdw_debugfs_init(void) {}
41 static inline void sdw_debugfs_exit(void) {}
42 #endif
43 
44 enum {
45 	SDW_MSG_FLAG_READ = 0,
46 	SDW_MSG_FLAG_WRITE,
47 };
48 
49 /**
50  * struct sdw_msg - Message structure
51  * @addr: Register address accessed in the Slave
52  * @len: number of messages
53  * @dev_num: Slave device number
54  * @addr_page1: SCP address page 1 Slave register
55  * @addr_page2: SCP address page 2 Slave register
56  * @flags: transfer flags, indicate if xfer is read or write
57  * @buf: message data buffer
58  * @ssp_sync: Send message at SSP (Stream Synchronization Point)
59  * @page: address requires paging
60  */
61 struct sdw_msg {
62 	u16 addr;
63 	u16 len;
64 	u8 dev_num;
65 	u8 addr_page1;
66 	u8 addr_page2;
67 	u8 flags;
68 	u8 *buf;
69 	bool ssp_sync;
70 	bool page;
71 };
72 
73 #define SDW_DOUBLE_RATE_FACTOR		2
74 #define SDW_STRM_RATE_GROUPING		1
75 
76 extern int sdw_rows[SDW_FRAME_ROWS];
77 extern int sdw_cols[SDW_FRAME_COLS];
78 
79 int sdw_find_row_index(int row);
80 int sdw_find_col_index(int col);
81 
82 /**
83  * sdw_port_runtime: Runtime port parameters for Master or Slave
84  *
85  * @num: Port number. For audio streams, valid port number ranges from
86  * [1,14]
87  * @ch_mask: Channel mask
88  * @transport_params: Transport parameters
89  * @port_params: Port parameters
90  * @port_node: List node for Master or Slave port_list
91  *
92  * SoundWire spec has no mention of ports for Master interface but the
93  * concept is logically extended.
94  */
95 struct sdw_port_runtime {
96 	int num;
97 	int ch_mask;
98 	struct sdw_transport_params transport_params;
99 	struct sdw_port_params port_params;
100 	struct list_head port_node;
101 };
102 
103 /**
104  * sdw_slave_runtime: Runtime Stream parameters for Slave
105  *
106  * @slave: Slave handle
107  * @direction: Data direction for Slave
108  * @ch_count: Number of channels handled by the Slave for
109  * this stream
110  * @m_rt_node: sdw_master_runtime list node
111  * @port_list: List of Slave Ports configured for this stream
112  */
113 struct sdw_slave_runtime {
114 	struct sdw_slave *slave;
115 	enum sdw_data_direction direction;
116 	unsigned int ch_count;
117 	struct list_head m_rt_node;
118 	struct list_head port_list;
119 };
120 
121 /**
122  * sdw_master_runtime: Runtime stream parameters for Master
123  *
124  * @bus: Bus handle
125  * @stream: Stream runtime handle
126  * @direction: Data direction for Master
127  * @ch_count: Number of channels handled by the Master for
128  * this stream, can be zero.
129  * @slave_rt_list: Slave runtime list
130  * @port_list: List of Master Ports configured for this stream, can be zero.
131  * @stream_node: sdw_stream_runtime master_list node
132  * @bus_node: sdw_bus m_rt_list node
133  */
134 struct sdw_master_runtime {
135 	struct sdw_bus *bus;
136 	struct sdw_stream_runtime *stream;
137 	enum sdw_data_direction direction;
138 	unsigned int ch_count;
139 	struct list_head slave_rt_list;
140 	struct list_head port_list;
141 	struct list_head stream_node;
142 	struct list_head bus_node;
143 };
144 
145 struct sdw_dpn_prop *sdw_get_slave_dpn_prop(struct sdw_slave *slave,
146 					    enum sdw_data_direction direction,
147 					    unsigned int port_num);
148 int sdw_configure_dpn_intr(struct sdw_slave *slave, int port,
149 			   bool enable, int mask);
150 
151 int sdw_transfer(struct sdw_bus *bus, struct sdw_msg *msg);
152 int sdw_transfer_defer(struct sdw_bus *bus, struct sdw_msg *msg,
153 		       struct sdw_defer *defer);
154 
155 #define SDW_READ_INTR_CLEAR_RETRY	10
156 
157 int sdw_fill_msg(struct sdw_msg *msg, struct sdw_slave *slave,
158 		 u32 addr, size_t count, u16 dev_num, u8 flags, u8 *buf);
159 
160 /* Retrieve and return channel count from channel mask */
161 static inline int sdw_ch_mask_to_ch(int ch_mask)
162 {
163 	int c = 0;
164 
165 	for (c = 0; ch_mask; ch_mask >>= 1)
166 		c += ch_mask & 1;
167 
168 	return c;
169 }
170 
171 /* Fill transport parameter data structure */
172 static inline void sdw_fill_xport_params(struct sdw_transport_params *params,
173 					 int port_num, bool grp_ctrl_valid,
174 					 int grp_ctrl, int sample_int,
175 					 int off1, int off2,
176 					 int hstart, int hstop,
177 					 int pack_mode, int lane_ctrl)
178 {
179 	params->port_num = port_num;
180 	params->blk_grp_ctrl_valid = grp_ctrl_valid;
181 	params->blk_grp_ctrl = grp_ctrl;
182 	params->sample_interval = sample_int;
183 	params->offset1 = off1;
184 	params->offset2 = off2;
185 	params->hstart = hstart;
186 	params->hstop = hstop;
187 	params->blk_pkg_mode = pack_mode;
188 	params->lane_ctrl = lane_ctrl;
189 }
190 
191 /* Fill port parameter data structure */
192 static inline void sdw_fill_port_params(struct sdw_port_params *params,
193 					int port_num, int bps,
194 					int flow_mode, int data_mode)
195 {
196 	params->num = port_num;
197 	params->bps = bps;
198 	params->flow_mode = flow_mode;
199 	params->data_mode = data_mode;
200 }
201 
202 /* Read-Modify-Write Slave register */
203 static inline int sdw_update(struct sdw_slave *slave, u32 addr, u8 mask, u8 val)
204 {
205 	int tmp;
206 
207 	tmp = sdw_read(slave, addr);
208 	if (tmp < 0)
209 		return tmp;
210 
211 	tmp = (tmp & ~mask) | val;
212 	return sdw_write(slave, addr, tmp);
213 }
214 
215 /* broadcast read/write for tests */
216 int sdw_bread_no_pm_unlocked(struct sdw_bus *bus, u16 dev_num, u32 addr);
217 int sdw_bwrite_no_pm_unlocked(struct sdw_bus *bus, u16 dev_num, u32 addr, u8 value);
218 
219 /*
220  * At the moment we only track Master-initiated hw_reset.
221  * Additional fields can be added as needed
222  */
223 #define SDW_UNATTACH_REQUEST_MASTER_RESET	BIT(0)
224 
225 void sdw_clear_slave_status(struct sdw_bus *bus, u32 request);
226 int sdw_slave_modalias(const struct sdw_slave *slave, char *buf, size_t size);
227 
228 #endif /* __SDW_BUS_H */
229