1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * OMAP SmartReflex Voltage Control 4 * 5 * Author: Thara Gopinath <thara@ti.com> 6 * 7 * Copyright (C) 2012 Texas Instruments, Inc. 8 * Thara Gopinath <thara@ti.com> 9 * 10 * Copyright (C) 2008 Nokia Corporation 11 * Kalle Jokiniemi 12 * 13 * Copyright (C) 2007 Texas Instruments, Inc. 14 * Lesly A M <x0080970@ti.com> 15 */ 16 17 #include <linux/module.h> 18 #include <linux/mod_devicetable.h> 19 #include <linux/interrupt.h> 20 #include <linux/clk.h> 21 #include <linux/io.h> 22 #include <linux/debugfs.h> 23 #include <linux/delay.h> 24 #include <linux/slab.h> 25 #include <linux/pm_runtime.h> 26 #include <linux/power/smartreflex.h> 27 28 #define DRIVER_NAME "smartreflex" 29 #define SMARTREFLEX_NAME_LEN 32 30 #define NVALUE_NAME_LEN 40 31 #define SR_DISABLE_TIMEOUT 200 32 33 /* sr_list contains all the instances of smartreflex module */ 34 static LIST_HEAD(sr_list); 35 36 static struct omap_sr_class_data *sr_class; 37 static struct dentry *sr_dbg_dir; 38 39 static inline void sr_write_reg(struct omap_sr *sr, unsigned offset, u32 value) 40 { 41 __raw_writel(value, (sr->base + offset)); 42 } 43 44 static inline void sr_modify_reg(struct omap_sr *sr, unsigned offset, u32 mask, 45 u32 value) 46 { 47 u32 reg_val; 48 49 /* 50 * Smartreflex error config register is special as it contains 51 * certain status bits which if written a 1 into means a clear 52 * of those bits. So in order to make sure no accidental write of 53 * 1 happens to those status bits, do a clear of them in the read 54 * value. This mean this API doesn't rewrite values in these bits 55 * if they are currently set, but does allow the caller to write 56 * those bits. 57 */ 58 if (sr->ip_type == SR_TYPE_V1 && offset == ERRCONFIG_V1) 59 mask |= ERRCONFIG_STATUS_V1_MASK; 60 else if (sr->ip_type == SR_TYPE_V2 && offset == ERRCONFIG_V2) 61 mask |= ERRCONFIG_VPBOUNDINTST_V2; 62 63 reg_val = __raw_readl(sr->base + offset); 64 reg_val &= ~mask; 65 66 value &= mask; 67 68 reg_val |= value; 69 70 __raw_writel(reg_val, (sr->base + offset)); 71 } 72 73 static inline u32 sr_read_reg(struct omap_sr *sr, unsigned offset) 74 { 75 return __raw_readl(sr->base + offset); 76 } 77 78 static struct omap_sr *_sr_lookup(struct voltagedomain *voltdm) 79 { 80 struct omap_sr *sr_info; 81 82 if (!voltdm) { 83 pr_err("%s: Null voltage domain passed!\n", __func__); 84 return ERR_PTR(-EINVAL); 85 } 86 87 list_for_each_entry(sr_info, &sr_list, node) { 88 if (voltdm == sr_info->voltdm) 89 return sr_info; 90 } 91 92 return ERR_PTR(-ENODATA); 93 } 94 95 static irqreturn_t sr_interrupt(int irq, void *data) 96 { 97 struct omap_sr *sr_info = data; 98 u32 status = 0; 99 100 switch (sr_info->ip_type) { 101 case SR_TYPE_V1: 102 /* Read the status bits */ 103 status = sr_read_reg(sr_info, ERRCONFIG_V1); 104 105 /* Clear them by writing back */ 106 sr_write_reg(sr_info, ERRCONFIG_V1, status); 107 break; 108 case SR_TYPE_V2: 109 /* Read the status bits */ 110 status = sr_read_reg(sr_info, IRQSTATUS); 111 112 /* Clear them by writing back */ 113 sr_write_reg(sr_info, IRQSTATUS, status); 114 break; 115 default: 116 dev_err(&sr_info->pdev->dev, "UNKNOWN IP type %d\n", 117 sr_info->ip_type); 118 return IRQ_NONE; 119 } 120 121 if (sr_class->notify) 122 sr_class->notify(sr_info, status); 123 124 return IRQ_HANDLED; 125 } 126 127 static void sr_set_clk_length(struct omap_sr *sr) 128 { 129 u32 fclk_speed; 130 131 /* Try interconnect target module fck first if it already exists */ 132 if (IS_ERR(sr->fck)) 133 return; 134 135 fclk_speed = clk_get_rate(sr->fck); 136 137 switch (fclk_speed) { 138 case 12000000: 139 sr->clk_length = SRCLKLENGTH_12MHZ_SYSCLK; 140 break; 141 case 13000000: 142 sr->clk_length = SRCLKLENGTH_13MHZ_SYSCLK; 143 break; 144 case 19200000: 145 sr->clk_length = SRCLKLENGTH_19MHZ_SYSCLK; 146 break; 147 case 26000000: 148 sr->clk_length = SRCLKLENGTH_26MHZ_SYSCLK; 149 break; 150 case 38400000: 151 sr->clk_length = SRCLKLENGTH_38MHZ_SYSCLK; 152 break; 153 default: 154 dev_err(&sr->pdev->dev, "%s: Invalid fclk rate: %d\n", 155 __func__, fclk_speed); 156 break; 157 } 158 } 159 160 static void sr_start_vddautocomp(struct omap_sr *sr) 161 { 162 if (!sr_class || !(sr_class->enable) || !(sr_class->configure)) { 163 dev_warn(&sr->pdev->dev, 164 "%s: smartreflex class driver not registered\n", 165 __func__); 166 return; 167 } 168 169 if (!sr_class->enable(sr)) 170 sr->autocomp_active = true; 171 } 172 173 static void sr_stop_vddautocomp(struct omap_sr *sr) 174 { 175 if (!sr_class || !(sr_class->disable)) { 176 dev_warn(&sr->pdev->dev, 177 "%s: smartreflex class driver not registered\n", 178 __func__); 179 return; 180 } 181 182 if (sr->autocomp_active) { 183 sr_class->disable(sr, 1); 184 sr->autocomp_active = false; 185 } 186 } 187 188 /* 189 * This function handles the initializations which have to be done 190 * only when both sr device and class driver regiter has 191 * completed. This will be attempted to be called from both sr class 192 * driver register and sr device intializtion API's. Only one call 193 * will ultimately succeed. 194 * 195 * Currently this function registers interrupt handler for a particular SR 196 * if smartreflex class driver is already registered and has 197 * requested for interrupts and the SR interrupt line in present. 198 */ 199 static int sr_late_init(struct omap_sr *sr_info) 200 { 201 int ret = 0; 202 203 if (sr_class->notify && sr_class->notify_flags && sr_info->irq) { 204 ret = devm_request_irq(&sr_info->pdev->dev, sr_info->irq, 205 sr_interrupt, 0, sr_info->name, sr_info); 206 if (ret) 207 goto error; 208 disable_irq(sr_info->irq); 209 } 210 211 return ret; 212 213 error: 214 list_del(&sr_info->node); 215 dev_err(&sr_info->pdev->dev, "%s: ERROR in registering interrupt handler. Smartreflex will not function as desired\n", 216 __func__); 217 218 return ret; 219 } 220 221 static void sr_v1_disable(struct omap_sr *sr) 222 { 223 int timeout = 0; 224 int errconf_val = ERRCONFIG_MCUACCUMINTST | ERRCONFIG_MCUVALIDINTST | 225 ERRCONFIG_MCUBOUNDINTST; 226 227 /* Enable MCUDisableAcknowledge interrupt */ 228 sr_modify_reg(sr, ERRCONFIG_V1, 229 ERRCONFIG_MCUDISACKINTEN, ERRCONFIG_MCUDISACKINTEN); 230 231 /* SRCONFIG - disable SR */ 232 sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, 0x0); 233 234 /* Disable all other SR interrupts and clear the status as needed */ 235 if (sr_read_reg(sr, ERRCONFIG_V1) & ERRCONFIG_VPBOUNDINTST_V1) 236 errconf_val |= ERRCONFIG_VPBOUNDINTST_V1; 237 sr_modify_reg(sr, ERRCONFIG_V1, 238 (ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUVALIDINTEN | 239 ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_VPBOUNDINTEN_V1), 240 errconf_val); 241 242 /* 243 * Wait for SR to be disabled. 244 * wait until ERRCONFIG.MCUDISACKINTST = 1. Typical latency is 1us. 245 */ 246 sr_test_cond_timeout((sr_read_reg(sr, ERRCONFIG_V1) & 247 ERRCONFIG_MCUDISACKINTST), SR_DISABLE_TIMEOUT, 248 timeout); 249 250 if (timeout >= SR_DISABLE_TIMEOUT) 251 dev_warn(&sr->pdev->dev, "%s: Smartreflex disable timedout\n", 252 __func__); 253 254 /* Disable MCUDisableAcknowledge interrupt & clear pending interrupt */ 255 sr_modify_reg(sr, ERRCONFIG_V1, ERRCONFIG_MCUDISACKINTEN, 256 ERRCONFIG_MCUDISACKINTST); 257 } 258 259 static void sr_v2_disable(struct omap_sr *sr) 260 { 261 int timeout = 0; 262 263 /* Enable MCUDisableAcknowledge interrupt */ 264 sr_write_reg(sr, IRQENABLE_SET, IRQENABLE_MCUDISABLEACKINT); 265 266 /* SRCONFIG - disable SR */ 267 sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, 0x0); 268 269 /* 270 * Disable all other SR interrupts and clear the status 271 * write to status register ONLY on need basis - only if status 272 * is set. 273 */ 274 if (sr_read_reg(sr, ERRCONFIG_V2) & ERRCONFIG_VPBOUNDINTST_V2) 275 sr_modify_reg(sr, ERRCONFIG_V2, ERRCONFIG_VPBOUNDINTEN_V2, 276 ERRCONFIG_VPBOUNDINTST_V2); 277 else 278 sr_modify_reg(sr, ERRCONFIG_V2, ERRCONFIG_VPBOUNDINTEN_V2, 279 0x0); 280 sr_write_reg(sr, IRQENABLE_CLR, (IRQENABLE_MCUACCUMINT | 281 IRQENABLE_MCUVALIDINT | 282 IRQENABLE_MCUBOUNDSINT)); 283 sr_write_reg(sr, IRQSTATUS, (IRQSTATUS_MCUACCUMINT | 284 IRQSTATUS_MCVALIDINT | 285 IRQSTATUS_MCBOUNDSINT)); 286 287 /* 288 * Wait for SR to be disabled. 289 * wait until IRQSTATUS.MCUDISACKINTST = 1. Typical latency is 1us. 290 */ 291 sr_test_cond_timeout((sr_read_reg(sr, IRQSTATUS) & 292 IRQSTATUS_MCUDISABLEACKINT), SR_DISABLE_TIMEOUT, 293 timeout); 294 295 if (timeout >= SR_DISABLE_TIMEOUT) 296 dev_warn(&sr->pdev->dev, "%s: Smartreflex disable timedout\n", 297 __func__); 298 299 /* Disable MCUDisableAcknowledge interrupt & clear pending interrupt */ 300 sr_write_reg(sr, IRQENABLE_CLR, IRQENABLE_MCUDISABLEACKINT); 301 sr_write_reg(sr, IRQSTATUS, IRQSTATUS_MCUDISABLEACKINT); 302 } 303 304 static struct omap_sr_nvalue_table *sr_retrieve_nvalue_row( 305 struct omap_sr *sr, u32 efuse_offs) 306 { 307 int i; 308 309 if (!sr->nvalue_table) { 310 dev_warn(&sr->pdev->dev, "%s: Missing ntarget value table\n", 311 __func__); 312 return NULL; 313 } 314 315 for (i = 0; i < sr->nvalue_count; i++) { 316 if (sr->nvalue_table[i].efuse_offs == efuse_offs) 317 return &sr->nvalue_table[i]; 318 } 319 320 return NULL; 321 } 322 323 /* Public Functions */ 324 325 /** 326 * sr_configure_errgen() - Configures the SmartReflex to perform AVS using the 327 * error generator module. 328 * @sr: SR module to be configured. 329 * 330 * This API is to be called from the smartreflex class driver to 331 * configure the error generator module inside the smartreflex module. 332 * SR settings if using the ERROR module inside Smartreflex. 333 * SR CLASS 3 by default uses only the ERROR module where as 334 * SR CLASS 2 can choose between ERROR module and MINMAXAVG 335 * module. Returns 0 on success and error value in case of failure. 336 */ 337 int sr_configure_errgen(struct omap_sr *sr) 338 { 339 u32 sr_config, sr_errconfig, errconfig_offs; 340 u32 vpboundint_en, vpboundint_st; 341 u32 senp_en = 0, senn_en = 0; 342 u8 senp_shift, senn_shift; 343 344 if (!sr) { 345 pr_warn("%s: NULL omap_sr from %pS\n", 346 __func__, (void *)_RET_IP_); 347 return -EINVAL; 348 } 349 350 if (!sr->clk_length) 351 sr_set_clk_length(sr); 352 353 senp_en = sr->senp_mod; 354 senn_en = sr->senn_mod; 355 356 sr_config = (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) | 357 SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN; 358 359 switch (sr->ip_type) { 360 case SR_TYPE_V1: 361 sr_config |= SRCONFIG_DELAYCTRL; 362 senn_shift = SRCONFIG_SENNENABLE_V1_SHIFT; 363 senp_shift = SRCONFIG_SENPENABLE_V1_SHIFT; 364 errconfig_offs = ERRCONFIG_V1; 365 vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V1; 366 vpboundint_st = ERRCONFIG_VPBOUNDINTST_V1; 367 break; 368 case SR_TYPE_V2: 369 senn_shift = SRCONFIG_SENNENABLE_V2_SHIFT; 370 senp_shift = SRCONFIG_SENPENABLE_V2_SHIFT; 371 errconfig_offs = ERRCONFIG_V2; 372 vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V2; 373 vpboundint_st = ERRCONFIG_VPBOUNDINTST_V2; 374 break; 375 default: 376 dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex module without specifying the ip\n", 377 __func__); 378 return -EINVAL; 379 } 380 381 sr_config |= ((senn_en << senn_shift) | (senp_en << senp_shift)); 382 sr_write_reg(sr, SRCONFIG, sr_config); 383 sr_errconfig = (sr->err_weight << ERRCONFIG_ERRWEIGHT_SHIFT) | 384 (sr->err_maxlimit << ERRCONFIG_ERRMAXLIMIT_SHIFT) | 385 (sr->err_minlimit << ERRCONFIG_ERRMINLIMIT_SHIFT); 386 sr_modify_reg(sr, errconfig_offs, (SR_ERRWEIGHT_MASK | 387 SR_ERRMAXLIMIT_MASK | SR_ERRMINLIMIT_MASK), 388 sr_errconfig); 389 390 /* Enabling the interrupts if the ERROR module is used */ 391 sr_modify_reg(sr, errconfig_offs, (vpboundint_en | vpboundint_st), 392 vpboundint_en); 393 394 return 0; 395 } 396 397 /** 398 * sr_disable_errgen() - Disables SmartReflex AVS module's errgen component 399 * @sr: SR module to be configured. 400 * 401 * This API is to be called from the smartreflex class driver to 402 * disable the error generator module inside the smartreflex module. 403 * 404 * Returns 0 on success and error value in case of failure. 405 */ 406 int sr_disable_errgen(struct omap_sr *sr) 407 { 408 u32 errconfig_offs; 409 u32 vpboundint_en, vpboundint_st; 410 411 if (!sr) { 412 pr_warn("%s: NULL omap_sr from %pS\n", 413 __func__, (void *)_RET_IP_); 414 return -EINVAL; 415 } 416 417 switch (sr->ip_type) { 418 case SR_TYPE_V1: 419 errconfig_offs = ERRCONFIG_V1; 420 vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V1; 421 vpboundint_st = ERRCONFIG_VPBOUNDINTST_V1; 422 break; 423 case SR_TYPE_V2: 424 errconfig_offs = ERRCONFIG_V2; 425 vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V2; 426 vpboundint_st = ERRCONFIG_VPBOUNDINTST_V2; 427 break; 428 default: 429 dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex module without specifying the ip\n", 430 __func__); 431 return -EINVAL; 432 } 433 434 /* Disable the Sensor and errorgen */ 435 sr_modify_reg(sr, SRCONFIG, SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN, 0); 436 437 /* 438 * Disable the interrupts of ERROR module 439 * NOTE: modify is a read, modify,write - an implicit OCP barrier 440 * which is required is present here - sequencing is critical 441 * at this point (after errgen is disabled, vpboundint disable) 442 */ 443 sr_modify_reg(sr, errconfig_offs, vpboundint_en | vpboundint_st, 0); 444 445 return 0; 446 } 447 448 /** 449 * sr_configure_minmax() - Configures the SmartReflex to perform AVS using the 450 * minmaxavg module. 451 * @sr: SR module to be configured. 452 * 453 * This API is to be called from the smartreflex class driver to 454 * configure the minmaxavg module inside the smartreflex module. 455 * SR settings if using the ERROR module inside Smartreflex. 456 * SR CLASS 3 by default uses only the ERROR module where as 457 * SR CLASS 2 can choose between ERROR module and MINMAXAVG 458 * module. Returns 0 on success and error value in case of failure. 459 */ 460 int sr_configure_minmax(struct omap_sr *sr) 461 { 462 u32 sr_config, sr_avgwt; 463 u32 senp_en = 0, senn_en = 0; 464 u8 senp_shift, senn_shift; 465 466 if (!sr) { 467 pr_warn("%s: NULL omap_sr from %pS\n", 468 __func__, (void *)_RET_IP_); 469 return -EINVAL; 470 } 471 472 if (!sr->clk_length) 473 sr_set_clk_length(sr); 474 475 senp_en = sr->senp_mod; 476 senn_en = sr->senn_mod; 477 478 sr_config = (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) | 479 SRCONFIG_SENENABLE | 480 (sr->accum_data << SRCONFIG_ACCUMDATA_SHIFT); 481 482 switch (sr->ip_type) { 483 case SR_TYPE_V1: 484 sr_config |= SRCONFIG_DELAYCTRL; 485 senn_shift = SRCONFIG_SENNENABLE_V1_SHIFT; 486 senp_shift = SRCONFIG_SENPENABLE_V1_SHIFT; 487 break; 488 case SR_TYPE_V2: 489 senn_shift = SRCONFIG_SENNENABLE_V2_SHIFT; 490 senp_shift = SRCONFIG_SENPENABLE_V2_SHIFT; 491 break; 492 default: 493 dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex module without specifying the ip\n", 494 __func__); 495 return -EINVAL; 496 } 497 498 sr_config |= ((senn_en << senn_shift) | (senp_en << senp_shift)); 499 sr_write_reg(sr, SRCONFIG, sr_config); 500 sr_avgwt = (sr->senp_avgweight << AVGWEIGHT_SENPAVGWEIGHT_SHIFT) | 501 (sr->senn_avgweight << AVGWEIGHT_SENNAVGWEIGHT_SHIFT); 502 sr_write_reg(sr, AVGWEIGHT, sr_avgwt); 503 504 /* 505 * Enabling the interrupts if MINMAXAVG module is used. 506 * TODO: check if all the interrupts are mandatory 507 */ 508 switch (sr->ip_type) { 509 case SR_TYPE_V1: 510 sr_modify_reg(sr, ERRCONFIG_V1, 511 (ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUVALIDINTEN | 512 ERRCONFIG_MCUBOUNDINTEN), 513 (ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUACCUMINTST | 514 ERRCONFIG_MCUVALIDINTEN | ERRCONFIG_MCUVALIDINTST | 515 ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_MCUBOUNDINTST)); 516 break; 517 case SR_TYPE_V2: 518 sr_write_reg(sr, IRQSTATUS, 519 IRQSTATUS_MCUACCUMINT | IRQSTATUS_MCVALIDINT | 520 IRQSTATUS_MCBOUNDSINT | IRQSTATUS_MCUDISABLEACKINT); 521 sr_write_reg(sr, IRQENABLE_SET, 522 IRQENABLE_MCUACCUMINT | IRQENABLE_MCUVALIDINT | 523 IRQENABLE_MCUBOUNDSINT | IRQENABLE_MCUDISABLEACKINT); 524 break; 525 default: 526 dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex module without specifying the ip\n", 527 __func__); 528 return -EINVAL; 529 } 530 531 return 0; 532 } 533 534 /** 535 * sr_enable() - Enables the smartreflex module. 536 * @sr: pointer to which the SR module to be configured belongs to. 537 * @volt: The voltage at which the Voltage domain associated with 538 * the smartreflex module is operating at. 539 * This is required only to program the correct Ntarget value. 540 * 541 * This API is to be called from the smartreflex class driver to 542 * enable a smartreflex module. Returns 0 on success. Returns error 543 * value if the voltage passed is wrong or if ntarget value is wrong. 544 */ 545 int sr_enable(struct omap_sr *sr, unsigned long volt) 546 { 547 struct omap_volt_data *volt_data; 548 struct omap_sr_nvalue_table *nvalue_row; 549 int ret; 550 551 if (!sr) { 552 pr_warn("%s: NULL omap_sr from %pS\n", 553 __func__, (void *)_RET_IP_); 554 return -EINVAL; 555 } 556 557 volt_data = omap_voltage_get_voltdata(sr->voltdm, volt); 558 559 if (IS_ERR(volt_data)) { 560 dev_warn(&sr->pdev->dev, "%s: Unable to get voltage table for nominal voltage %ld\n", 561 __func__, volt); 562 return PTR_ERR(volt_data); 563 } 564 565 nvalue_row = sr_retrieve_nvalue_row(sr, volt_data->sr_efuse_offs); 566 567 if (!nvalue_row) { 568 dev_warn(&sr->pdev->dev, "%s: failure getting SR data for this voltage %ld\n", 569 __func__, volt); 570 return -ENODATA; 571 } 572 573 /* errminlimit is opp dependent and hence linked to voltage */ 574 sr->err_minlimit = nvalue_row->errminlimit; 575 576 clk_enable(sr->fck); 577 578 /* Check if SR is already enabled. If yes do nothing */ 579 if (sr_read_reg(sr, SRCONFIG) & SRCONFIG_SRENABLE) 580 goto out_enabled; 581 582 /* Configure SR */ 583 ret = sr_class->configure(sr); 584 if (ret) 585 goto out_enabled; 586 587 sr_write_reg(sr, NVALUERECIPROCAL, nvalue_row->nvalue); 588 589 /* SRCONFIG - enable SR */ 590 sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, SRCONFIG_SRENABLE); 591 592 out_enabled: 593 sr->enabled = 1; 594 595 return 0; 596 } 597 598 /** 599 * sr_disable() - Disables the smartreflex module. 600 * @sr: pointer to which the SR module to be configured belongs to. 601 * 602 * This API is to be called from the smartreflex class driver to 603 * disable a smartreflex module. 604 */ 605 void sr_disable(struct omap_sr *sr) 606 { 607 if (!sr) { 608 pr_warn("%s: NULL omap_sr from %pS\n", 609 __func__, (void *)_RET_IP_); 610 return; 611 } 612 613 /* Check if SR clocks are already disabled. If yes do nothing */ 614 if (!sr->enabled) 615 return; 616 617 /* 618 * Disable SR if only it is indeed enabled. Else just 619 * disable the clocks. 620 */ 621 if (sr_read_reg(sr, SRCONFIG) & SRCONFIG_SRENABLE) { 622 switch (sr->ip_type) { 623 case SR_TYPE_V1: 624 sr_v1_disable(sr); 625 break; 626 case SR_TYPE_V2: 627 sr_v2_disable(sr); 628 break; 629 default: 630 dev_err(&sr->pdev->dev, "UNKNOWN IP type %d\n", 631 sr->ip_type); 632 } 633 } 634 635 clk_disable(sr->fck); 636 sr->enabled = 0; 637 } 638 639 /** 640 * sr_register_class() - API to register a smartreflex class parameters. 641 * @class_data: The structure containing various sr class specific data. 642 * 643 * This API is to be called by the smartreflex class driver to register itself 644 * with the smartreflex driver during init. Returns 0 on success else the 645 * error value. 646 */ 647 int sr_register_class(struct omap_sr_class_data *class_data) 648 { 649 struct omap_sr *sr_info; 650 651 if (!class_data) { 652 pr_warn("%s:, Smartreflex class data passed is NULL\n", 653 __func__); 654 return -EINVAL; 655 } 656 657 if (sr_class) { 658 pr_warn("%s: Smartreflex class driver already registered\n", 659 __func__); 660 return -EBUSY; 661 } 662 663 sr_class = class_data; 664 665 /* 666 * Call into late init to do initializations that require 667 * both sr driver and sr class driver to be initiallized. 668 */ 669 list_for_each_entry(sr_info, &sr_list, node) 670 sr_late_init(sr_info); 671 672 return 0; 673 } 674 675 /** 676 * omap_sr_enable() - API to enable SR clocks and to call into the 677 * registered smartreflex class enable API. 678 * @voltdm: VDD pointer to which the SR module to be configured belongs to. 679 * 680 * This API is to be called from the kernel in order to enable 681 * a particular smartreflex module. This API will do the initial 682 * configurations to turn on the smartreflex module and in turn call 683 * into the registered smartreflex class enable API. 684 */ 685 void omap_sr_enable(struct voltagedomain *voltdm) 686 { 687 struct omap_sr *sr = _sr_lookup(voltdm); 688 689 if (IS_ERR(sr)) { 690 pr_warn("%s: omap_sr struct for voltdm not found\n", __func__); 691 return; 692 } 693 694 if (!sr->autocomp_active) 695 return; 696 697 if (!sr_class || !(sr_class->enable) || !(sr_class->configure)) { 698 dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not registered\n", 699 __func__); 700 return; 701 } 702 703 sr_class->enable(sr); 704 } 705 706 /** 707 * omap_sr_disable() - API to disable SR without resetting the voltage 708 * processor voltage 709 * @voltdm: VDD pointer to which the SR module to be configured belongs to. 710 * 711 * This API is to be called from the kernel in order to disable 712 * a particular smartreflex module. This API will in turn call 713 * into the registered smartreflex class disable API. This API will tell 714 * the smartreflex class disable not to reset the VP voltage after 715 * disabling smartreflex. 716 */ 717 void omap_sr_disable(struct voltagedomain *voltdm) 718 { 719 struct omap_sr *sr = _sr_lookup(voltdm); 720 721 if (IS_ERR(sr)) { 722 pr_warn("%s: omap_sr struct for voltdm not found\n", __func__); 723 return; 724 } 725 726 if (!sr->autocomp_active) 727 return; 728 729 if (!sr_class || !(sr_class->disable)) { 730 dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not registered\n", 731 __func__); 732 return; 733 } 734 735 sr_class->disable(sr, 0); 736 } 737 738 /** 739 * omap_sr_disable_reset_volt() - API to disable SR and reset the 740 * voltage processor voltage 741 * @voltdm: VDD pointer to which the SR module to be configured belongs to. 742 * 743 * This API is to be called from the kernel in order to disable 744 * a particular smartreflex module. This API will in turn call 745 * into the registered smartreflex class disable API. This API will tell 746 * the smartreflex class disable to reset the VP voltage after 747 * disabling smartreflex. 748 */ 749 void omap_sr_disable_reset_volt(struct voltagedomain *voltdm) 750 { 751 struct omap_sr *sr = _sr_lookup(voltdm); 752 753 if (IS_ERR(sr)) { 754 pr_warn("%s: omap_sr struct for voltdm not found\n", __func__); 755 return; 756 } 757 758 if (!sr->autocomp_active) 759 return; 760 761 if (!sr_class || !(sr_class->disable)) { 762 dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not registered\n", 763 __func__); 764 return; 765 } 766 767 sr_class->disable(sr, 1); 768 } 769 770 /* PM Debug FS entries to enable and disable smartreflex. */ 771 static int omap_sr_autocomp_show(void *data, u64 *val) 772 { 773 struct omap_sr *sr_info = data; 774 775 if (!sr_info) { 776 pr_warn("%s: omap_sr struct not found\n", __func__); 777 return -EINVAL; 778 } 779 780 *val = sr_info->autocomp_active; 781 782 return 0; 783 } 784 785 static int omap_sr_autocomp_store(void *data, u64 val) 786 { 787 struct omap_sr *sr_info = data; 788 789 if (!sr_info) { 790 pr_warn("%s: omap_sr struct not found\n", __func__); 791 return -EINVAL; 792 } 793 794 /* Sanity check */ 795 if (val > 1) { 796 pr_warn("%s: Invalid argument %lld\n", __func__, val); 797 return -EINVAL; 798 } 799 800 /* control enable/disable only if there is a delta in value */ 801 if (sr_info->autocomp_active != val) { 802 if (!val) 803 sr_stop_vddautocomp(sr_info); 804 else 805 sr_start_vddautocomp(sr_info); 806 } 807 808 return 0; 809 } 810 811 DEFINE_SIMPLE_ATTRIBUTE(pm_sr_fops, omap_sr_autocomp_show, 812 omap_sr_autocomp_store, "%llu\n"); 813 814 static int omap_sr_probe(struct platform_device *pdev) 815 { 816 struct omap_sr *sr_info; 817 struct omap_sr_data *pdata = pdev->dev.platform_data; 818 struct dentry *nvalue_dir; 819 int i, ret = 0; 820 821 sr_info = devm_kzalloc(&pdev->dev, sizeof(struct omap_sr), GFP_KERNEL); 822 if (!sr_info) 823 return -ENOMEM; 824 825 sr_info->name = devm_kzalloc(&pdev->dev, 826 SMARTREFLEX_NAME_LEN, GFP_KERNEL); 827 if (!sr_info->name) 828 return -ENOMEM; 829 830 platform_set_drvdata(pdev, sr_info); 831 832 if (!pdata) { 833 dev_err(&pdev->dev, "%s: platform data missing\n", __func__); 834 return -EINVAL; 835 } 836 837 sr_info->base = devm_platform_ioremap_resource(pdev, 0); 838 if (IS_ERR(sr_info->base)) 839 return PTR_ERR(sr_info->base); 840 841 ret = platform_get_irq_optional(pdev, 0); 842 if (ret < 0 && ret != -ENXIO) 843 return dev_err_probe(&pdev->dev, ret, "failed to get IRQ resource\n"); 844 if (ret > 0) 845 sr_info->irq = ret; 846 847 sr_info->fck = devm_clk_get(pdev->dev.parent, "fck"); 848 if (IS_ERR(sr_info->fck)) 849 return PTR_ERR(sr_info->fck); 850 clk_prepare(sr_info->fck); 851 852 pm_runtime_enable(&pdev->dev); 853 854 snprintf(sr_info->name, SMARTREFLEX_NAME_LEN, "%s", pdata->name); 855 856 sr_info->pdev = pdev; 857 sr_info->srid = pdev->id; 858 sr_info->voltdm = pdata->voltdm; 859 sr_info->nvalue_table = pdata->nvalue_table; 860 sr_info->nvalue_count = pdata->nvalue_count; 861 sr_info->senn_mod = pdata->senn_mod; 862 sr_info->senp_mod = pdata->senp_mod; 863 sr_info->err_weight = pdata->err_weight; 864 sr_info->err_maxlimit = pdata->err_maxlimit; 865 sr_info->accum_data = pdata->accum_data; 866 sr_info->senn_avgweight = pdata->senn_avgweight; 867 sr_info->senp_avgweight = pdata->senp_avgweight; 868 sr_info->autocomp_active = false; 869 sr_info->ip_type = pdata->ip_type; 870 871 sr_set_clk_length(sr_info); 872 873 list_add(&sr_info->node, &sr_list); 874 875 /* 876 * Call into late init to do initializations that require 877 * both sr driver and sr class driver to be initiallized. 878 */ 879 if (sr_class) { 880 ret = sr_late_init(sr_info); 881 if (ret) { 882 pr_warn("%s: Error in SR late init\n", __func__); 883 goto err_list_del; 884 } 885 } 886 887 dev_info(&pdev->dev, "%s: SmartReflex driver initialized\n", __func__); 888 if (!sr_dbg_dir) 889 sr_dbg_dir = debugfs_create_dir("smartreflex", NULL); 890 891 sr_info->dbg_dir = debugfs_create_dir(sr_info->name, sr_dbg_dir); 892 893 debugfs_create_file("autocomp", S_IRUGO | S_IWUSR, sr_info->dbg_dir, 894 sr_info, &pm_sr_fops); 895 debugfs_create_x32("errweight", S_IRUGO, sr_info->dbg_dir, 896 &sr_info->err_weight); 897 debugfs_create_x32("errmaxlimit", S_IRUGO, sr_info->dbg_dir, 898 &sr_info->err_maxlimit); 899 900 nvalue_dir = debugfs_create_dir("nvalue", sr_info->dbg_dir); 901 902 if (sr_info->nvalue_count == 0 || !sr_info->nvalue_table) { 903 dev_warn(&pdev->dev, "%s: %s: No Voltage table for the corresponding vdd. Cannot create debugfs entries for n-values\n", 904 __func__, sr_info->name); 905 906 ret = -ENODATA; 907 goto err_debugfs; 908 } 909 910 for (i = 0; i < sr_info->nvalue_count; i++) { 911 char name[NVALUE_NAME_LEN + 1]; 912 913 snprintf(name, sizeof(name), "volt_%lu", 914 sr_info->nvalue_table[i].volt_nominal); 915 debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir, 916 &(sr_info->nvalue_table[i].nvalue)); 917 snprintf(name, sizeof(name), "errminlimit_%lu", 918 sr_info->nvalue_table[i].volt_nominal); 919 debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir, 920 &(sr_info->nvalue_table[i].errminlimit)); 921 922 } 923 924 return 0; 925 926 err_debugfs: 927 debugfs_remove_recursive(sr_info->dbg_dir); 928 err_list_del: 929 pm_runtime_disable(&pdev->dev); 930 list_del(&sr_info->node); 931 clk_unprepare(sr_info->fck); 932 933 return ret; 934 } 935 936 static int omap_sr_remove(struct platform_device *pdev) 937 { 938 struct device *dev = &pdev->dev; 939 struct omap_sr *sr_info = platform_get_drvdata(pdev); 940 941 if (sr_info->autocomp_active) 942 sr_stop_vddautocomp(sr_info); 943 debugfs_remove_recursive(sr_info->dbg_dir); 944 945 pm_runtime_disable(dev); 946 clk_unprepare(sr_info->fck); 947 list_del(&sr_info->node); 948 return 0; 949 } 950 951 static void omap_sr_shutdown(struct platform_device *pdev) 952 { 953 struct omap_sr *sr_info = platform_get_drvdata(pdev); 954 955 if (sr_info->autocomp_active) 956 sr_stop_vddautocomp(sr_info); 957 958 return; 959 } 960 961 static const struct of_device_id omap_sr_match[] = { 962 { .compatible = "ti,omap3-smartreflex-core", }, 963 { .compatible = "ti,omap3-smartreflex-mpu-iva", }, 964 { .compatible = "ti,omap4-smartreflex-core", }, 965 { .compatible = "ti,omap4-smartreflex-mpu", }, 966 { .compatible = "ti,omap4-smartreflex-iva", }, 967 { }, 968 }; 969 MODULE_DEVICE_TABLE(of, omap_sr_match); 970 971 static struct platform_driver smartreflex_driver = { 972 .probe = omap_sr_probe, 973 .remove = omap_sr_remove, 974 .shutdown = omap_sr_shutdown, 975 .driver = { 976 .name = DRIVER_NAME, 977 .of_match_table = omap_sr_match, 978 }, 979 }; 980 981 static int __init sr_init(void) 982 { 983 int ret = 0; 984 985 ret = platform_driver_register(&smartreflex_driver); 986 if (ret) { 987 pr_err("%s: platform driver register failed for SR\n", 988 __func__); 989 return ret; 990 } 991 992 return 0; 993 } 994 late_initcall(sr_init); 995 996 static void __exit sr_exit(void) 997 { 998 platform_driver_unregister(&smartreflex_driver); 999 } 1000 module_exit(sr_exit); 1001 1002 MODULE_DESCRIPTION("OMAP Smartreflex Driver"); 1003 MODULE_LICENSE("GPL"); 1004 MODULE_ALIAS("platform:" DRIVER_NAME); 1005 MODULE_AUTHOR("Texas Instruments Inc"); 1006