xref: /openbmc/linux/drivers/soc/qcom/Kconfig (revision 55fd7e02)
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# QCOM Soc drivers
4#
5menu "Qualcomm SoC drivers"
6
7config QCOM_AOSS_QMP
8	tristate "Qualcomm AOSS Driver"
9	depends on ARCH_QCOM || COMPILE_TEST
10	depends on MAILBOX
11	depends on COMMON_CLK && PM
12	select PM_GENERIC_DOMAINS
13	help
14	  This driver provides the means of communicating with and controlling
15	  the low-power state for resources related to the remoteproc
16	  subsystems as well as controlling the debug clocks exposed by the Always On
17	  Subsystem (AOSS) using Qualcomm Messaging Protocol (QMP).
18
19config QCOM_COMMAND_DB
20	bool "Qualcomm Command DB"
21	depends on ARCH_QCOM || COMPILE_TEST
22	depends on OF_RESERVED_MEM
23	help
24	  Command DB queries shared memory by key string for shared system
25	  resources. Platform drivers that require to set state of a shared
26	  resource on a RPM-hardened platform must use this database to get
27	  SoC specific identifier and information for the shared resources.
28
29config QCOM_GENI_SE
30	tristate "QCOM GENI Serial Engine Driver"
31	depends on ARCH_QCOM || COMPILE_TEST
32	help
33	  This driver is used to manage Generic Interface (GENI) firmware based
34	  Qualcomm Technologies, Inc. Universal Peripheral (QUP) Wrapper. This
35	  driver is also used to manage the common aspects of multiple Serial
36	  Engines present in the QUP.
37
38config QCOM_GSBI
39	tristate "QCOM General Serial Bus Interface"
40	depends on ARCH_QCOM || COMPILE_TEST
41	select MFD_SYSCON
42	help
43	  Say y here to enable GSBI support.  The GSBI provides control
44	  functions for connecting the underlying serial UART, SPI, and I2C
45	  devices to the output pins.
46
47config QCOM_LLCC
48	tristate "Qualcomm Technologies, Inc. LLCC driver"
49	depends on ARCH_QCOM || COMPILE_TEST
50	help
51	  Qualcomm Technologies, Inc. platform specific
52	  Last Level Cache Controller(LLCC) driver for platforms such as,
53	  SDM845. This provides interfaces to clients that use the LLCC.
54	  Say yes here to enable LLCC slice driver.
55
56config QCOM_MDT_LOADER
57	tristate
58	select QCOM_SCM
59
60config QCOM_OCMEM
61	tristate "Qualcomm On Chip Memory (OCMEM) driver"
62	depends on ARCH_QCOM
63	select QCOM_SCM
64	help
65	  The On Chip Memory (OCMEM) allocator allows various clients to
66	  allocate memory from OCMEM based on performance, latency and power
67	  requirements. This is typically used by the GPU, camera/video, and
68	  audio components on some Snapdragon SoCs.
69
70config QCOM_PDR_HELPERS
71	tristate
72	select QCOM_QMI_HELPERS
73
74config QCOM_QMI_HELPERS
75	tristate
76	depends on NET
77
78config QCOM_RMTFS_MEM
79	tristate "Qualcomm Remote Filesystem memory driver"
80	depends on ARCH_QCOM
81	select QCOM_SCM
82	help
83	  The Qualcomm remote filesystem memory driver is used for allocating
84	  and exposing regions of shared memory with remote processors for the
85	  purpose of exchanging sector-data between the remote filesystem
86	  service and its clients.
87
88	  Say y here if you intend to boot the modem remoteproc.
89
90config QCOM_RPMH
91	bool "Qualcomm RPM-Hardened (RPMH) Communication"
92	depends on ARCH_QCOM && ARM64 || COMPILE_TEST
93	help
94	  Support for communication with the hardened-RPM blocks in
95	  Qualcomm Technologies Inc (QTI) SoCs. RPMH communication uses an
96	  internal bus to transmit state requests for shared resources. A set
97	  of hardware components aggregate requests for these resources and
98	  help apply the aggregated state on the resource.
99
100config QCOM_RPMHPD
101	tristate "Qualcomm RPMh Power domain driver"
102	depends on QCOM_RPMH && QCOM_COMMAND_DB
103	help
104	  QCOM RPMh Power domain driver to support power-domains with
105	  performance states. The driver communicates a performance state
106	  value to RPMh which then translates it into corresponding voltage
107	  for the voltage rail.
108
109config QCOM_RPMPD
110	tristate "Qualcomm RPM Power domain driver"
111	depends on QCOM_SMD_RPM
112	help
113	  QCOM RPM Power domain driver to support power-domains with
114	  performance states. The driver communicates a performance state
115	  value to RPM which then translates it into corresponding voltage
116	  for the voltage rail.
117
118config QCOM_SMEM
119	tristate "Qualcomm Shared Memory Manager (SMEM)"
120	depends on ARCH_QCOM || COMPILE_TEST
121	depends on HWSPINLOCK
122	help
123	  Say y here to enable support for the Qualcomm Shared Memory Manager.
124	  The driver provides an interface to items in a heap shared among all
125	  processors in a Qualcomm platform.
126
127config QCOM_SMD_RPM
128	tristate "Qualcomm Resource Power Manager (RPM) over SMD"
129	depends on ARCH_QCOM || COMPILE_TEST
130	depends on RPMSG
131	help
132	  If you say yes to this option, support will be included for the
133	  Resource Power Manager system found in the Qualcomm 8974 based
134	  devices.
135
136	  This is required to access many regulators, clocks and bus
137	  frequencies controlled by the RPM on these devices.
138
139	  Say M here if you want to include support for the Qualcomm RPM as a
140	  module. This will build a module called "qcom-smd-rpm".
141
142config QCOM_SMEM_STATE
143	bool
144
145config QCOM_SMP2P
146	tristate "Qualcomm Shared Memory Point to Point support"
147	depends on MAILBOX
148	depends on QCOM_SMEM
149	select QCOM_SMEM_STATE
150	select IRQ_DOMAIN
151	help
152	  Say yes here to support the Qualcomm Shared Memory Point to Point
153	  protocol.
154
155config QCOM_SMSM
156	tristate "Qualcomm Shared Memory State Machine"
157	depends on QCOM_SMEM
158	select QCOM_SMEM_STATE
159	select IRQ_DOMAIN
160	help
161	  Say yes here to support the Qualcomm Shared Memory State Machine.
162	  The state machine is represented by bits in shared memory.
163
164config QCOM_SOCINFO
165	tristate "Qualcomm socinfo driver"
166	depends on QCOM_SMEM
167	select SOC_BUS
168	help
169	 Say yes here to support the Qualcomm socinfo driver, providing
170	 information about the SoC to user space.
171
172config QCOM_WCNSS_CTRL
173	tristate "Qualcomm WCNSS control driver"
174	depends on ARCH_QCOM || COMPILE_TEST
175	depends on RPMSG
176	help
177	  Client driver for the WCNSS_CTRL SMD channel, used to download nv
178	  firmware to a newly booted WCNSS chip.
179
180config QCOM_APR
181	tristate "Qualcomm APR Bus (Asynchronous Packet Router)"
182	depends on ARCH_QCOM || COMPILE_TEST
183	depends on RPMSG
184	depends on NET
185	select QCOM_PDR_HELPERS
186	help
187	  Enable APR IPC protocol support between
188	  application processor and QDSP6. APR is
189	  used by audio driver to configure QDSP6
190	  ASM, ADM and AFE modules.
191endmenu
192