1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * LiteX SoC Controller Driver 4 * 5 * Copyright (C) 2020 Antmicro <www.antmicro.com> 6 * 7 */ 8 9 #include <linux/litex.h> 10 #include <linux/device.h> 11 #include <linux/errno.h> 12 #include <linux/of.h> 13 #include <linux/platform_device.h> 14 #include <linux/printk.h> 15 #include <linux/module.h> 16 #include <linux/errno.h> 17 #include <linux/io.h> 18 19 /* 20 * LiteX SoC Generator, depending on the configuration, can split a single 21 * logical CSR (Control&Status Register) into a series of consecutive physical 22 * registers. 23 * 24 * For example, in the configuration with 8-bit CSR Bus, 32-bit aligned (the 25 * default one for 32-bit CPUs) a 32-bit logical CSR will be generated as four 26 * 32-bit physical registers, each one containing one byte of meaningful data. 27 * 28 * For details see: https://github.com/enjoy-digital/litex/wiki/CSR-Bus 29 * 30 * The purpose of `litex_set_reg`/`litex_get_reg` is to implement the logic 31 * of writing to/reading from the LiteX CSR in a single place that can be 32 * then reused by all LiteX drivers. 33 */ 34 35 /** 36 * litex_set_reg() - Writes the value to the LiteX CSR (Control&Status Register) 37 * @reg: Address of the CSR 38 * @reg_size: The width of the CSR expressed in the number of bytes 39 * @val: Value to be written to the CSR 40 * 41 * In the currently supported LiteX configuration (8-bit CSR Bus, 32-bit aligned), 42 * a 32-bit LiteX CSR is generated as 4 consecutive 32-bit physical registers, 43 * each one containing one byte of meaningful data. 44 * 45 * This function splits a single possibly multi-byte write into a series of 46 * single-byte writes with a proper offset. 47 */ 48 void litex_set_reg(void __iomem *reg, unsigned long reg_size, 49 unsigned long val) 50 { 51 unsigned long shifted_data, shift, i; 52 53 for (i = 0; i < reg_size; ++i) { 54 shift = ((reg_size - i - 1) * LITEX_SUBREG_SIZE_BIT); 55 shifted_data = val >> shift; 56 57 WRITE_LITEX_SUBREGISTER(shifted_data, reg, i); 58 } 59 } 60 EXPORT_SYMBOL_GPL(litex_set_reg); 61 62 /** 63 * litex_get_reg() - Reads the value of the LiteX CSR (Control&Status Register) 64 * @reg: Address of the CSR 65 * @reg_size: The width of the CSR expressed in the number of bytes 66 * 67 * Return: Value read from the CSR 68 * 69 * In the currently supported LiteX configuration (8-bit CSR Bus, 32-bit aligned), 70 * a 32-bit LiteX CSR is generated as 4 consecutive 32-bit physical registers, 71 * each one containing one byte of meaningful data. 72 * 73 * This function generates a series of single-byte reads with a proper offset 74 * and joins their results into a single multi-byte value. 75 */ 76 unsigned long litex_get_reg(void __iomem *reg, unsigned long reg_size) 77 { 78 unsigned long shifted_data, shift, i; 79 unsigned long result = 0; 80 81 for (i = 0; i < reg_size; ++i) { 82 shifted_data = READ_LITEX_SUBREGISTER(reg, i); 83 84 shift = ((reg_size - i - 1) * LITEX_SUBREG_SIZE_BIT); 85 result |= (shifted_data << shift); 86 } 87 88 return result; 89 } 90 EXPORT_SYMBOL_GPL(litex_get_reg); 91 92 #define SCRATCH_REG_OFF 0x04 93 #define SCRATCH_REG_VALUE 0x12345678 94 #define SCRATCH_TEST_VALUE 0xdeadbeef 95 96 /* 97 * Check LiteX CSR read/write access 98 * 99 * This function reads and writes a scratch register in order to verify if CSR 100 * access works. 101 * 102 * In case any problems are detected, the driver should panic. 103 * 104 * Access to the LiteX CSR is, by design, done in CPU native endianness. 105 * The driver should not dynamically configure access functions when 106 * the endianness mismatch is detected. Such situation indicates problems in 107 * the soft SoC design and should be solved at the LiteX generator level, 108 * not in the software. 109 */ 110 static int litex_check_csr_access(void __iomem *reg_addr) 111 { 112 unsigned long reg; 113 114 reg = litex_read32(reg_addr + SCRATCH_REG_OFF); 115 116 if (reg != SCRATCH_REG_VALUE) { 117 panic("Scratch register read error - the system is probably broken! Expected: 0x%x but got: 0x%lx", 118 SCRATCH_REG_VALUE, reg); 119 return -EINVAL; 120 } 121 122 litex_write32(reg_addr + SCRATCH_REG_OFF, SCRATCH_TEST_VALUE); 123 reg = litex_read32(reg_addr + SCRATCH_REG_OFF); 124 125 if (reg != SCRATCH_TEST_VALUE) { 126 panic("Scratch register write error - the system is probably broken! Expected: 0x%x but got: 0x%lx", 127 SCRATCH_TEST_VALUE, reg); 128 return -EINVAL; 129 } 130 131 /* restore original value of the SCRATCH register */ 132 litex_write32(reg_addr + SCRATCH_REG_OFF, SCRATCH_REG_VALUE); 133 134 pr_info("LiteX SoC Controller driver initialized"); 135 136 return 0; 137 } 138 139 struct litex_soc_ctrl_device { 140 void __iomem *base; 141 }; 142 143 #ifdef CONFIG_OF 144 static const struct of_device_id litex_soc_ctrl_of_match[] = { 145 {.compatible = "litex,soc-controller"}, 146 {}, 147 }; 148 MODULE_DEVICE_TABLE(of, litex_soc_ctrl_of_match); 149 #endif /* CONFIG_OF */ 150 151 static int litex_soc_ctrl_probe(struct platform_device *pdev) 152 { 153 struct litex_soc_ctrl_device *soc_ctrl_dev; 154 155 soc_ctrl_dev = devm_kzalloc(&pdev->dev, sizeof(*soc_ctrl_dev), GFP_KERNEL); 156 if (!soc_ctrl_dev) 157 return -ENOMEM; 158 159 soc_ctrl_dev->base = devm_platform_ioremap_resource(pdev, 0); 160 if (IS_ERR(soc_ctrl_dev->base)) 161 return PTR_ERR(soc_ctrl_dev->base); 162 163 return litex_check_csr_access(soc_ctrl_dev->base); 164 } 165 166 static struct platform_driver litex_soc_ctrl_driver = { 167 .driver = { 168 .name = "litex-soc-controller", 169 .of_match_table = of_match_ptr(litex_soc_ctrl_of_match) 170 }, 171 .probe = litex_soc_ctrl_probe, 172 }; 173 174 module_platform_driver(litex_soc_ctrl_driver); 175 MODULE_DESCRIPTION("LiteX SoC Controller driver"); 176 MODULE_AUTHOR("Antmicro <www.antmicro.com>"); 177 MODULE_LICENSE("GPL v2"); 178