xref: /openbmc/linux/drivers/soc/fsl/qe/ucc_fast.c (revision 60772e48)
1 /*
2  * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
3  *
4  * Authors: 	Shlomi Gridish <gridish@freescale.com>
5  * 		Li Yang <leoli@freescale.com>
6  *
7  * Description:
8  * QE UCC Fast API Set - UCC Fast specific routines implementations.
9  *
10  * This program is free software; you can redistribute  it and/or modify it
11  * under  the terms of  the GNU General  Public License as published by the
12  * Free Software Foundation;  either version 2 of the  License, or (at your
13  * option) any later version.
14  */
15 #include <linux/kernel.h>
16 #include <linux/errno.h>
17 #include <linux/slab.h>
18 #include <linux/stddef.h>
19 #include <linux/interrupt.h>
20 #include <linux/err.h>
21 #include <linux/export.h>
22 
23 #include <asm/io.h>
24 #include <soc/fsl/qe/immap_qe.h>
25 #include <soc/fsl/qe/qe.h>
26 
27 #include <soc/fsl/qe/ucc.h>
28 #include <soc/fsl/qe/ucc_fast.h>
29 
30 void ucc_fast_dump_regs(struct ucc_fast_private * uccf)
31 {
32 	printk(KERN_INFO "UCC%u Fast registers:\n", uccf->uf_info->ucc_num);
33 	printk(KERN_INFO "Base address: 0x%p\n", uccf->uf_regs);
34 
35 	printk(KERN_INFO "gumr  : addr=0x%p, val=0x%08x\n",
36 		  &uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr));
37 	printk(KERN_INFO "upsmr : addr=0x%p, val=0x%08x\n",
38 		  &uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr));
39 	printk(KERN_INFO "utodr : addr=0x%p, val=0x%04x\n",
40 		  &uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr));
41 	printk(KERN_INFO "udsr  : addr=0x%p, val=0x%04x\n",
42 		  &uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr));
43 	printk(KERN_INFO "ucce  : addr=0x%p, val=0x%08x\n",
44 		  &uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce));
45 	printk(KERN_INFO "uccm  : addr=0x%p, val=0x%08x\n",
46 		  &uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm));
47 	printk(KERN_INFO "uccs  : addr=0x%p, val=0x%02x\n",
48 		  &uccf->uf_regs->uccs, in_8(&uccf->uf_regs->uccs));
49 	printk(KERN_INFO "urfb  : addr=0x%p, val=0x%08x\n",
50 		  &uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb));
51 	printk(KERN_INFO "urfs  : addr=0x%p, val=0x%04x\n",
52 		  &uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs));
53 	printk(KERN_INFO "urfet : addr=0x%p, val=0x%04x\n",
54 		  &uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet));
55 	printk(KERN_INFO "urfset: addr=0x%p, val=0x%04x\n",
56 		  &uccf->uf_regs->urfset, in_be16(&uccf->uf_regs->urfset));
57 	printk(KERN_INFO "utfb  : addr=0x%p, val=0x%08x\n",
58 		  &uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb));
59 	printk(KERN_INFO "utfs  : addr=0x%p, val=0x%04x\n",
60 		  &uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs));
61 	printk(KERN_INFO "utfet : addr=0x%p, val=0x%04x\n",
62 		  &uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet));
63 	printk(KERN_INFO "utftt : addr=0x%p, val=0x%04x\n",
64 		  &uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt));
65 	printk(KERN_INFO "utpt  : addr=0x%p, val=0x%04x\n",
66 		  &uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt));
67 	printk(KERN_INFO "urtry : addr=0x%p, val=0x%08x\n",
68 		  &uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry));
69 	printk(KERN_INFO "guemr : addr=0x%p, val=0x%02x\n",
70 		  &uccf->uf_regs->guemr, in_8(&uccf->uf_regs->guemr));
71 }
72 EXPORT_SYMBOL(ucc_fast_dump_regs);
73 
74 u32 ucc_fast_get_qe_cr_subblock(int uccf_num)
75 {
76 	switch (uccf_num) {
77 	case 0: return QE_CR_SUBBLOCK_UCCFAST1;
78 	case 1: return QE_CR_SUBBLOCK_UCCFAST2;
79 	case 2: return QE_CR_SUBBLOCK_UCCFAST3;
80 	case 3: return QE_CR_SUBBLOCK_UCCFAST4;
81 	case 4: return QE_CR_SUBBLOCK_UCCFAST5;
82 	case 5: return QE_CR_SUBBLOCK_UCCFAST6;
83 	case 6: return QE_CR_SUBBLOCK_UCCFAST7;
84 	case 7: return QE_CR_SUBBLOCK_UCCFAST8;
85 	default: return QE_CR_SUBBLOCK_INVALID;
86 	}
87 }
88 EXPORT_SYMBOL(ucc_fast_get_qe_cr_subblock);
89 
90 void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf)
91 {
92 	out_be16(&uccf->uf_regs->utodr, UCC_FAST_TOD);
93 }
94 EXPORT_SYMBOL(ucc_fast_transmit_on_demand);
95 
96 void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode)
97 {
98 	struct ucc_fast __iomem *uf_regs;
99 	u32 gumr;
100 
101 	uf_regs = uccf->uf_regs;
102 
103 	/* Enable reception and/or transmission on this UCC. */
104 	gumr = in_be32(&uf_regs->gumr);
105 	if (mode & COMM_DIR_TX) {
106 		gumr |= UCC_FAST_GUMR_ENT;
107 		uccf->enabled_tx = 1;
108 	}
109 	if (mode & COMM_DIR_RX) {
110 		gumr |= UCC_FAST_GUMR_ENR;
111 		uccf->enabled_rx = 1;
112 	}
113 	out_be32(&uf_regs->gumr, gumr);
114 }
115 EXPORT_SYMBOL(ucc_fast_enable);
116 
117 void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode)
118 {
119 	struct ucc_fast __iomem *uf_regs;
120 	u32 gumr;
121 
122 	uf_regs = uccf->uf_regs;
123 
124 	/* Disable reception and/or transmission on this UCC. */
125 	gumr = in_be32(&uf_regs->gumr);
126 	if (mode & COMM_DIR_TX) {
127 		gumr &= ~UCC_FAST_GUMR_ENT;
128 		uccf->enabled_tx = 0;
129 	}
130 	if (mode & COMM_DIR_RX) {
131 		gumr &= ~UCC_FAST_GUMR_ENR;
132 		uccf->enabled_rx = 0;
133 	}
134 	out_be32(&uf_regs->gumr, gumr);
135 }
136 EXPORT_SYMBOL(ucc_fast_disable);
137 
138 int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret)
139 {
140 	struct ucc_fast_private *uccf;
141 	struct ucc_fast __iomem *uf_regs;
142 	u32 gumr;
143 	int ret;
144 
145 	if (!uf_info)
146 		return -EINVAL;
147 
148 	/* check if the UCC port number is in range. */
149 	if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) {
150 		printk(KERN_ERR "%s: illegal UCC number\n", __func__);
151 		return -EINVAL;
152 	}
153 
154 	/* Check that 'max_rx_buf_length' is properly aligned (4). */
155 	if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) {
156 		printk(KERN_ERR "%s: max_rx_buf_length not aligned\n",
157 			__func__);
158 		return -EINVAL;
159 	}
160 
161 	/* Validate Virtual Fifo register values */
162 	if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) {
163 		printk(KERN_ERR "%s: urfs is too small\n", __func__);
164 		return -EINVAL;
165 	}
166 
167 	if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
168 		printk(KERN_ERR "%s: urfs is not aligned\n", __func__);
169 		return -EINVAL;
170 	}
171 
172 	if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
173 		printk(KERN_ERR "%s: urfet is not aligned.\n", __func__);
174 		return -EINVAL;
175 	}
176 
177 	if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
178 		printk(KERN_ERR "%s: urfset is not aligned\n", __func__);
179 		return -EINVAL;
180 	}
181 
182 	if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
183 		printk(KERN_ERR "%s: utfs is not aligned\n", __func__);
184 		return -EINVAL;
185 	}
186 
187 	if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
188 		printk(KERN_ERR "%s: utfet is not aligned\n", __func__);
189 		return -EINVAL;
190 	}
191 
192 	if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
193 		printk(KERN_ERR "%s: utftt is not aligned\n", __func__);
194 		return -EINVAL;
195 	}
196 
197 	uccf = kzalloc(sizeof(struct ucc_fast_private), GFP_KERNEL);
198 	if (!uccf) {
199 		printk(KERN_ERR "%s: Cannot allocate private data\n",
200 			__func__);
201 		return -ENOMEM;
202 	}
203 
204 	/* Fill fast UCC structure */
205 	uccf->uf_info = uf_info;
206 	/* Set the PHY base address */
207 	uccf->uf_regs = ioremap(uf_info->regs, sizeof(struct ucc_fast));
208 	if (uccf->uf_regs == NULL) {
209 		printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
210 		kfree(uccf);
211 		return -ENOMEM;
212 	}
213 
214 	uccf->enabled_tx = 0;
215 	uccf->enabled_rx = 0;
216 	uccf->stopped_tx = 0;
217 	uccf->stopped_rx = 0;
218 	uf_regs = uccf->uf_regs;
219 	uccf->p_ucce = &uf_regs->ucce;
220 	uccf->p_uccm = &uf_regs->uccm;
221 #ifdef CONFIG_UGETH_TX_ON_DEMAND
222 	uccf->p_utodr = &uf_regs->utodr;
223 #endif
224 #ifdef STATISTICS
225 	uccf->tx_frames = 0;
226 	uccf->rx_frames = 0;
227 	uccf->rx_discarded = 0;
228 #endif				/* STATISTICS */
229 
230 	/* Set UCC to fast type */
231 	ret = ucc_set_type(uf_info->ucc_num, UCC_SPEED_TYPE_FAST);
232 	if (ret) {
233 		printk(KERN_ERR "%s: cannot set UCC type\n", __func__);
234 		ucc_fast_free(uccf);
235 		return ret;
236 	}
237 
238 	uccf->mrblr = uf_info->max_rx_buf_length;
239 
240 	/* Set GUMR */
241 	/* For more details see the hardware spec. */
242 	gumr = uf_info->ttx_trx;
243 	if (uf_info->tci)
244 		gumr |= UCC_FAST_GUMR_TCI;
245 	if (uf_info->cdp)
246 		gumr |= UCC_FAST_GUMR_CDP;
247 	if (uf_info->ctsp)
248 		gumr |= UCC_FAST_GUMR_CTSP;
249 	if (uf_info->cds)
250 		gumr |= UCC_FAST_GUMR_CDS;
251 	if (uf_info->ctss)
252 		gumr |= UCC_FAST_GUMR_CTSS;
253 	if (uf_info->txsy)
254 		gumr |= UCC_FAST_GUMR_TXSY;
255 	if (uf_info->rsyn)
256 		gumr |= UCC_FAST_GUMR_RSYN;
257 	gumr |= uf_info->synl;
258 	if (uf_info->rtsm)
259 		gumr |= UCC_FAST_GUMR_RTSM;
260 	gumr |= uf_info->renc;
261 	if (uf_info->revd)
262 		gumr |= UCC_FAST_GUMR_REVD;
263 	gumr |= uf_info->tenc;
264 	gumr |= uf_info->tcrc;
265 	gumr |= uf_info->mode;
266 	out_be32(&uf_regs->gumr, gumr);
267 
268 	/* Allocate memory for Tx Virtual Fifo */
269 	uccf->ucc_fast_tx_virtual_fifo_base_offset =
270 	    qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
271 	if (IS_ERR_VALUE(uccf->ucc_fast_tx_virtual_fifo_base_offset)) {
272 		printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO\n",
273 			__func__);
274 		uccf->ucc_fast_tx_virtual_fifo_base_offset = 0;
275 		ucc_fast_free(uccf);
276 		return -ENOMEM;
277 	}
278 
279 	/* Allocate memory for Rx Virtual Fifo */
280 	uccf->ucc_fast_rx_virtual_fifo_base_offset =
281 		qe_muram_alloc(uf_info->urfs +
282 			   UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR,
283 			   UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
284 	if (IS_ERR_VALUE(uccf->ucc_fast_rx_virtual_fifo_base_offset)) {
285 		printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO\n",
286 			__func__);
287 		uccf->ucc_fast_rx_virtual_fifo_base_offset = 0;
288 		ucc_fast_free(uccf);
289 		return -ENOMEM;
290 	}
291 
292 	/* Set Virtual Fifo registers */
293 	out_be16(&uf_regs->urfs, uf_info->urfs);
294 	out_be16(&uf_regs->urfet, uf_info->urfet);
295 	out_be16(&uf_regs->urfset, uf_info->urfset);
296 	out_be16(&uf_regs->utfs, uf_info->utfs);
297 	out_be16(&uf_regs->utfet, uf_info->utfet);
298 	out_be16(&uf_regs->utftt, uf_info->utftt);
299 	/* utfb, urfb are offsets from MURAM base */
300 	out_be32(&uf_regs->utfb, uccf->ucc_fast_tx_virtual_fifo_base_offset);
301 	out_be32(&uf_regs->urfb, uccf->ucc_fast_rx_virtual_fifo_base_offset);
302 
303 	/* Mux clocking */
304 	/* Grant Support */
305 	ucc_set_qe_mux_grant(uf_info->ucc_num, uf_info->grant_support);
306 	/* Breakpoint Support */
307 	ucc_set_qe_mux_bkpt(uf_info->ucc_num, uf_info->brkpt_support);
308 	/* Set Tsa or NMSI mode. */
309 	ucc_set_qe_mux_tsa(uf_info->ucc_num, uf_info->tsa);
310 	/* If NMSI (not Tsa), set Tx and Rx clock. */
311 	if (!uf_info->tsa) {
312 		/* Rx clock routing */
313 		if ((uf_info->rx_clock != QE_CLK_NONE) &&
314 		    ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->rx_clock,
315 					COMM_DIR_RX)) {
316 			printk(KERN_ERR "%s: illegal value for RX clock\n",
317 			       __func__);
318 			ucc_fast_free(uccf);
319 			return -EINVAL;
320 		}
321 		/* Tx clock routing */
322 		if ((uf_info->tx_clock != QE_CLK_NONE) &&
323 		    ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->tx_clock,
324 					COMM_DIR_TX)) {
325 			printk(KERN_ERR "%s: illegal value for TX clock\n",
326 			       __func__);
327 			ucc_fast_free(uccf);
328 			return -EINVAL;
329 		}
330 	} else {
331 		/* tdm Rx clock routing */
332 		if ((uf_info->rx_clock != QE_CLK_NONE) &&
333 		    ucc_set_tdm_rxtx_clk(uf_info->tdm_num, uf_info->rx_clock,
334 					 COMM_DIR_RX)) {
335 			pr_err("%s: illegal value for RX clock", __func__);
336 			ucc_fast_free(uccf);
337 			return -EINVAL;
338 		}
339 
340 		/* tdm Tx clock routing */
341 		if ((uf_info->tx_clock != QE_CLK_NONE) &&
342 		    ucc_set_tdm_rxtx_clk(uf_info->tdm_num, uf_info->tx_clock,
343 					 COMM_DIR_TX)) {
344 			pr_err("%s: illegal value for TX clock", __func__);
345 			ucc_fast_free(uccf);
346 			return -EINVAL;
347 		}
348 
349 		/* tdm Rx sync clock routing */
350 		if ((uf_info->rx_sync != QE_CLK_NONE) &&
351 		    ucc_set_tdm_rxtx_sync(uf_info->tdm_num, uf_info->rx_sync,
352 					  COMM_DIR_RX)) {
353 			pr_err("%s: illegal value for RX clock", __func__);
354 			ucc_fast_free(uccf);
355 			return -EINVAL;
356 		}
357 
358 		/* tdm Tx sync clock routing */
359 		if ((uf_info->tx_sync != QE_CLK_NONE) &&
360 		    ucc_set_tdm_rxtx_sync(uf_info->tdm_num, uf_info->tx_sync,
361 					  COMM_DIR_TX)) {
362 			pr_err("%s: illegal value for TX clock", __func__);
363 			ucc_fast_free(uccf);
364 			return -EINVAL;
365 		}
366 	}
367 
368 	/* Set interrupt mask register at UCC level. */
369 	out_be32(&uf_regs->uccm, uf_info->uccm_mask);
370 
371 	/* First, clear anything pending at UCC level,
372 	 * otherwise, old garbage may come through
373 	 * as soon as the dam is opened. */
374 
375 	/* Writing '1' clears */
376 	out_be32(&uf_regs->ucce, 0xffffffff);
377 
378 	*uccf_ret = uccf;
379 	return 0;
380 }
381 EXPORT_SYMBOL(ucc_fast_init);
382 
383 void ucc_fast_free(struct ucc_fast_private * uccf)
384 {
385 	if (!uccf)
386 		return;
387 
388 	if (uccf->ucc_fast_tx_virtual_fifo_base_offset)
389 		qe_muram_free(uccf->ucc_fast_tx_virtual_fifo_base_offset);
390 
391 	if (uccf->ucc_fast_rx_virtual_fifo_base_offset)
392 		qe_muram_free(uccf->ucc_fast_rx_virtual_fifo_base_offset);
393 
394 	if (uccf->uf_regs)
395 		iounmap(uccf->uf_regs);
396 
397 	kfree(uccf);
398 }
399 EXPORT_SYMBOL(ucc_fast_free);
400