xref: /openbmc/linux/drivers/soc/fsl/qe/ucc_fast.c (revision 3a83e4e6)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
4  *
5  * Authors: 	Shlomi Gridish <gridish@freescale.com>
6  * 		Li Yang <leoli@freescale.com>
7  *
8  * Description:
9  * QE UCC Fast API Set - UCC Fast specific routines implementations.
10  */
11 #include <linux/kernel.h>
12 #include <linux/errno.h>
13 #include <linux/slab.h>
14 #include <linux/stddef.h>
15 #include <linux/interrupt.h>
16 #include <linux/err.h>
17 #include <linux/export.h>
18 
19 #include <asm/io.h>
20 #include <soc/fsl/qe/immap_qe.h>
21 #include <soc/fsl/qe/qe.h>
22 
23 #include <soc/fsl/qe/ucc.h>
24 #include <soc/fsl/qe/ucc_fast.h>
25 
26 void ucc_fast_dump_regs(struct ucc_fast_private * uccf)
27 {
28 	printk(KERN_INFO "UCC%u Fast registers:\n", uccf->uf_info->ucc_num);
29 	printk(KERN_INFO "Base address: 0x%p\n", uccf->uf_regs);
30 
31 	printk(KERN_INFO "gumr  : addr=0x%p, val=0x%08x\n",
32 		  &uccf->uf_regs->gumr, qe_ioread32be(&uccf->uf_regs->gumr));
33 	printk(KERN_INFO "upsmr : addr=0x%p, val=0x%08x\n",
34 		  &uccf->uf_regs->upsmr, qe_ioread32be(&uccf->uf_regs->upsmr));
35 	printk(KERN_INFO "utodr : addr=0x%p, val=0x%04x\n",
36 		  &uccf->uf_regs->utodr, qe_ioread16be(&uccf->uf_regs->utodr));
37 	printk(KERN_INFO "udsr  : addr=0x%p, val=0x%04x\n",
38 		  &uccf->uf_regs->udsr, qe_ioread16be(&uccf->uf_regs->udsr));
39 	printk(KERN_INFO "ucce  : addr=0x%p, val=0x%08x\n",
40 		  &uccf->uf_regs->ucce, qe_ioread32be(&uccf->uf_regs->ucce));
41 	printk(KERN_INFO "uccm  : addr=0x%p, val=0x%08x\n",
42 		  &uccf->uf_regs->uccm, qe_ioread32be(&uccf->uf_regs->uccm));
43 	printk(KERN_INFO "uccs  : addr=0x%p, val=0x%02x\n",
44 		  &uccf->uf_regs->uccs, qe_ioread8(&uccf->uf_regs->uccs));
45 	printk(KERN_INFO "urfb  : addr=0x%p, val=0x%08x\n",
46 		  &uccf->uf_regs->urfb, qe_ioread32be(&uccf->uf_regs->urfb));
47 	printk(KERN_INFO "urfs  : addr=0x%p, val=0x%04x\n",
48 		  &uccf->uf_regs->urfs, qe_ioread16be(&uccf->uf_regs->urfs));
49 	printk(KERN_INFO "urfet : addr=0x%p, val=0x%04x\n",
50 		  &uccf->uf_regs->urfet, qe_ioread16be(&uccf->uf_regs->urfet));
51 	printk(KERN_INFO "urfset: addr=0x%p, val=0x%04x\n",
52 		  &uccf->uf_regs->urfset,
53 		  qe_ioread16be(&uccf->uf_regs->urfset));
54 	printk(KERN_INFO "utfb  : addr=0x%p, val=0x%08x\n",
55 		  &uccf->uf_regs->utfb, qe_ioread32be(&uccf->uf_regs->utfb));
56 	printk(KERN_INFO "utfs  : addr=0x%p, val=0x%04x\n",
57 		  &uccf->uf_regs->utfs, qe_ioread16be(&uccf->uf_regs->utfs));
58 	printk(KERN_INFO "utfet : addr=0x%p, val=0x%04x\n",
59 		  &uccf->uf_regs->utfet, qe_ioread16be(&uccf->uf_regs->utfet));
60 	printk(KERN_INFO "utftt : addr=0x%p, val=0x%04x\n",
61 		  &uccf->uf_regs->utftt, qe_ioread16be(&uccf->uf_regs->utftt));
62 	printk(KERN_INFO "utpt  : addr=0x%p, val=0x%04x\n",
63 		  &uccf->uf_regs->utpt, qe_ioread16be(&uccf->uf_regs->utpt));
64 	printk(KERN_INFO "urtry : addr=0x%p, val=0x%08x\n",
65 		  &uccf->uf_regs->urtry, qe_ioread32be(&uccf->uf_regs->urtry));
66 	printk(KERN_INFO "guemr : addr=0x%p, val=0x%02x\n",
67 		  &uccf->uf_regs->guemr, qe_ioread8(&uccf->uf_regs->guemr));
68 }
69 EXPORT_SYMBOL(ucc_fast_dump_regs);
70 
71 u32 ucc_fast_get_qe_cr_subblock(int uccf_num)
72 {
73 	switch (uccf_num) {
74 	case 0: return QE_CR_SUBBLOCK_UCCFAST1;
75 	case 1: return QE_CR_SUBBLOCK_UCCFAST2;
76 	case 2: return QE_CR_SUBBLOCK_UCCFAST3;
77 	case 3: return QE_CR_SUBBLOCK_UCCFAST4;
78 	case 4: return QE_CR_SUBBLOCK_UCCFAST5;
79 	case 5: return QE_CR_SUBBLOCK_UCCFAST6;
80 	case 6: return QE_CR_SUBBLOCK_UCCFAST7;
81 	case 7: return QE_CR_SUBBLOCK_UCCFAST8;
82 	default: return QE_CR_SUBBLOCK_INVALID;
83 	}
84 }
85 EXPORT_SYMBOL(ucc_fast_get_qe_cr_subblock);
86 
87 void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf)
88 {
89 	qe_iowrite16be(UCC_FAST_TOD, &uccf->uf_regs->utodr);
90 }
91 EXPORT_SYMBOL(ucc_fast_transmit_on_demand);
92 
93 void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode)
94 {
95 	struct ucc_fast __iomem *uf_regs;
96 	u32 gumr;
97 
98 	uf_regs = uccf->uf_regs;
99 
100 	/* Enable reception and/or transmission on this UCC. */
101 	gumr = qe_ioread32be(&uf_regs->gumr);
102 	if (mode & COMM_DIR_TX) {
103 		gumr |= UCC_FAST_GUMR_ENT;
104 		uccf->enabled_tx = 1;
105 	}
106 	if (mode & COMM_DIR_RX) {
107 		gumr |= UCC_FAST_GUMR_ENR;
108 		uccf->enabled_rx = 1;
109 	}
110 	qe_iowrite32be(gumr, &uf_regs->gumr);
111 }
112 EXPORT_SYMBOL(ucc_fast_enable);
113 
114 void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode)
115 {
116 	struct ucc_fast __iomem *uf_regs;
117 	u32 gumr;
118 
119 	uf_regs = uccf->uf_regs;
120 
121 	/* Disable reception and/or transmission on this UCC. */
122 	gumr = qe_ioread32be(&uf_regs->gumr);
123 	if (mode & COMM_DIR_TX) {
124 		gumr &= ~UCC_FAST_GUMR_ENT;
125 		uccf->enabled_tx = 0;
126 	}
127 	if (mode & COMM_DIR_RX) {
128 		gumr &= ~UCC_FAST_GUMR_ENR;
129 		uccf->enabled_rx = 0;
130 	}
131 	qe_iowrite32be(gumr, &uf_regs->gumr);
132 }
133 EXPORT_SYMBOL(ucc_fast_disable);
134 
135 int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret)
136 {
137 	struct ucc_fast_private *uccf;
138 	struct ucc_fast __iomem *uf_regs;
139 	u32 gumr;
140 	int ret;
141 
142 	if (!uf_info)
143 		return -EINVAL;
144 
145 	/* check if the UCC port number is in range. */
146 	if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) {
147 		printk(KERN_ERR "%s: illegal UCC number\n", __func__);
148 		return -EINVAL;
149 	}
150 
151 	/* Check that 'max_rx_buf_length' is properly aligned (4). */
152 	if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) {
153 		printk(KERN_ERR "%s: max_rx_buf_length not aligned\n",
154 			__func__);
155 		return -EINVAL;
156 	}
157 
158 	/* Validate Virtual Fifo register values */
159 	if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) {
160 		printk(KERN_ERR "%s: urfs is too small\n", __func__);
161 		return -EINVAL;
162 	}
163 
164 	if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
165 		printk(KERN_ERR "%s: urfs is not aligned\n", __func__);
166 		return -EINVAL;
167 	}
168 
169 	if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
170 		printk(KERN_ERR "%s: urfet is not aligned.\n", __func__);
171 		return -EINVAL;
172 	}
173 
174 	if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
175 		printk(KERN_ERR "%s: urfset is not aligned\n", __func__);
176 		return -EINVAL;
177 	}
178 
179 	if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
180 		printk(KERN_ERR "%s: utfs is not aligned\n", __func__);
181 		return -EINVAL;
182 	}
183 
184 	if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
185 		printk(KERN_ERR "%s: utfet is not aligned\n", __func__);
186 		return -EINVAL;
187 	}
188 
189 	if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
190 		printk(KERN_ERR "%s: utftt is not aligned\n", __func__);
191 		return -EINVAL;
192 	}
193 
194 	uccf = kzalloc(sizeof(struct ucc_fast_private), GFP_KERNEL);
195 	if (!uccf) {
196 		printk(KERN_ERR "%s: Cannot allocate private data\n",
197 			__func__);
198 		return -ENOMEM;
199 	}
200 	uccf->ucc_fast_tx_virtual_fifo_base_offset = -1;
201 	uccf->ucc_fast_rx_virtual_fifo_base_offset = -1;
202 
203 	/* Fill fast UCC structure */
204 	uccf->uf_info = uf_info;
205 	/* Set the PHY base address */
206 	uccf->uf_regs = ioremap(uf_info->regs, sizeof(struct ucc_fast));
207 	if (uccf->uf_regs == NULL) {
208 		printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
209 		kfree(uccf);
210 		return -ENOMEM;
211 	}
212 
213 	uccf->enabled_tx = 0;
214 	uccf->enabled_rx = 0;
215 	uccf->stopped_tx = 0;
216 	uccf->stopped_rx = 0;
217 	uf_regs = uccf->uf_regs;
218 	uccf->p_ucce = &uf_regs->ucce;
219 	uccf->p_uccm = &uf_regs->uccm;
220 #ifdef CONFIG_UGETH_TX_ON_DEMAND
221 	uccf->p_utodr = &uf_regs->utodr;
222 #endif
223 #ifdef STATISTICS
224 	uccf->tx_frames = 0;
225 	uccf->rx_frames = 0;
226 	uccf->rx_discarded = 0;
227 #endif				/* STATISTICS */
228 
229 	/* Set UCC to fast type */
230 	ret = ucc_set_type(uf_info->ucc_num, UCC_SPEED_TYPE_FAST);
231 	if (ret) {
232 		printk(KERN_ERR "%s: cannot set UCC type\n", __func__);
233 		ucc_fast_free(uccf);
234 		return ret;
235 	}
236 
237 	uccf->mrblr = uf_info->max_rx_buf_length;
238 
239 	/* Set GUMR */
240 	/* For more details see the hardware spec. */
241 	gumr = uf_info->ttx_trx;
242 	if (uf_info->tci)
243 		gumr |= UCC_FAST_GUMR_TCI;
244 	if (uf_info->cdp)
245 		gumr |= UCC_FAST_GUMR_CDP;
246 	if (uf_info->ctsp)
247 		gumr |= UCC_FAST_GUMR_CTSP;
248 	if (uf_info->cds)
249 		gumr |= UCC_FAST_GUMR_CDS;
250 	if (uf_info->ctss)
251 		gumr |= UCC_FAST_GUMR_CTSS;
252 	if (uf_info->txsy)
253 		gumr |= UCC_FAST_GUMR_TXSY;
254 	if (uf_info->rsyn)
255 		gumr |= UCC_FAST_GUMR_RSYN;
256 	gumr |= uf_info->synl;
257 	if (uf_info->rtsm)
258 		gumr |= UCC_FAST_GUMR_RTSM;
259 	gumr |= uf_info->renc;
260 	if (uf_info->revd)
261 		gumr |= UCC_FAST_GUMR_REVD;
262 	gumr |= uf_info->tenc;
263 	gumr |= uf_info->tcrc;
264 	gumr |= uf_info->mode;
265 	qe_iowrite32be(gumr, &uf_regs->gumr);
266 
267 	/* Allocate memory for Tx Virtual Fifo */
268 	uccf->ucc_fast_tx_virtual_fifo_base_offset =
269 	    qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
270 	if (uccf->ucc_fast_tx_virtual_fifo_base_offset < 0) {
271 		printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO\n",
272 			__func__);
273 		ucc_fast_free(uccf);
274 		return -ENOMEM;
275 	}
276 
277 	/* Allocate memory for Rx Virtual Fifo */
278 	uccf->ucc_fast_rx_virtual_fifo_base_offset =
279 		qe_muram_alloc(uf_info->urfs +
280 			   UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR,
281 			   UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
282 	if (uccf->ucc_fast_rx_virtual_fifo_base_offset < 0) {
283 		printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO\n",
284 			__func__);
285 		ucc_fast_free(uccf);
286 		return -ENOMEM;
287 	}
288 
289 	/* Set Virtual Fifo registers */
290 	qe_iowrite16be(uf_info->urfs, &uf_regs->urfs);
291 	qe_iowrite16be(uf_info->urfet, &uf_regs->urfet);
292 	qe_iowrite16be(uf_info->urfset, &uf_regs->urfset);
293 	qe_iowrite16be(uf_info->utfs, &uf_regs->utfs);
294 	qe_iowrite16be(uf_info->utfet, &uf_regs->utfet);
295 	qe_iowrite16be(uf_info->utftt, &uf_regs->utftt);
296 	/* utfb, urfb are offsets from MURAM base */
297 	qe_iowrite32be(uccf->ucc_fast_tx_virtual_fifo_base_offset,
298 		       &uf_regs->utfb);
299 	qe_iowrite32be(uccf->ucc_fast_rx_virtual_fifo_base_offset,
300 		       &uf_regs->urfb);
301 
302 	/* Mux clocking */
303 	/* Grant Support */
304 	ucc_set_qe_mux_grant(uf_info->ucc_num, uf_info->grant_support);
305 	/* Breakpoint Support */
306 	ucc_set_qe_mux_bkpt(uf_info->ucc_num, uf_info->brkpt_support);
307 	/* Set Tsa or NMSI mode. */
308 	ucc_set_qe_mux_tsa(uf_info->ucc_num, uf_info->tsa);
309 	/* If NMSI (not Tsa), set Tx and Rx clock. */
310 	if (!uf_info->tsa) {
311 		/* Rx clock routing */
312 		if ((uf_info->rx_clock != QE_CLK_NONE) &&
313 		    ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->rx_clock,
314 					COMM_DIR_RX)) {
315 			printk(KERN_ERR "%s: illegal value for RX clock\n",
316 			       __func__);
317 			ucc_fast_free(uccf);
318 			return -EINVAL;
319 		}
320 		/* Tx clock routing */
321 		if ((uf_info->tx_clock != QE_CLK_NONE) &&
322 		    ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->tx_clock,
323 					COMM_DIR_TX)) {
324 			printk(KERN_ERR "%s: illegal value for TX clock\n",
325 			       __func__);
326 			ucc_fast_free(uccf);
327 			return -EINVAL;
328 		}
329 	} else {
330 		/* tdm Rx clock routing */
331 		if ((uf_info->rx_clock != QE_CLK_NONE) &&
332 		    ucc_set_tdm_rxtx_clk(uf_info->tdm_num, uf_info->rx_clock,
333 					 COMM_DIR_RX)) {
334 			pr_err("%s: illegal value for RX clock", __func__);
335 			ucc_fast_free(uccf);
336 			return -EINVAL;
337 		}
338 
339 		/* tdm Tx clock routing */
340 		if ((uf_info->tx_clock != QE_CLK_NONE) &&
341 		    ucc_set_tdm_rxtx_clk(uf_info->tdm_num, uf_info->tx_clock,
342 					 COMM_DIR_TX)) {
343 			pr_err("%s: illegal value for TX clock", __func__);
344 			ucc_fast_free(uccf);
345 			return -EINVAL;
346 		}
347 
348 		/* tdm Rx sync clock routing */
349 		if ((uf_info->rx_sync != QE_CLK_NONE) &&
350 		    ucc_set_tdm_rxtx_sync(uf_info->tdm_num, uf_info->rx_sync,
351 					  COMM_DIR_RX)) {
352 			pr_err("%s: illegal value for RX clock", __func__);
353 			ucc_fast_free(uccf);
354 			return -EINVAL;
355 		}
356 
357 		/* tdm Tx sync clock routing */
358 		if ((uf_info->tx_sync != QE_CLK_NONE) &&
359 		    ucc_set_tdm_rxtx_sync(uf_info->tdm_num, uf_info->tx_sync,
360 					  COMM_DIR_TX)) {
361 			pr_err("%s: illegal value for TX clock", __func__);
362 			ucc_fast_free(uccf);
363 			return -EINVAL;
364 		}
365 	}
366 
367 	/* Set interrupt mask register at UCC level. */
368 	qe_iowrite32be(uf_info->uccm_mask, &uf_regs->uccm);
369 
370 	/* First, clear anything pending at UCC level,
371 	 * otherwise, old garbage may come through
372 	 * as soon as the dam is opened. */
373 
374 	/* Writing '1' clears */
375 	qe_iowrite32be(0xffffffff, &uf_regs->ucce);
376 
377 	*uccf_ret = uccf;
378 	return 0;
379 }
380 EXPORT_SYMBOL(ucc_fast_init);
381 
382 void ucc_fast_free(struct ucc_fast_private * uccf)
383 {
384 	if (!uccf)
385 		return;
386 
387 	qe_muram_free(uccf->ucc_fast_tx_virtual_fifo_base_offset);
388 	qe_muram_free(uccf->ucc_fast_rx_virtual_fifo_base_offset);
389 
390 	if (uccf->uf_regs)
391 		iounmap(uccf->uf_regs);
392 
393 	kfree(uccf);
394 }
395 EXPORT_SYMBOL(ucc_fast_free);
396