xref: /openbmc/linux/drivers/soc/fsl/qe/ucc_fast.c (revision 22d55f02)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
4  *
5  * Authors: 	Shlomi Gridish <gridish@freescale.com>
6  * 		Li Yang <leoli@freescale.com>
7  *
8  * Description:
9  * QE UCC Fast API Set - UCC Fast specific routines implementations.
10  */
11 #include <linux/kernel.h>
12 #include <linux/errno.h>
13 #include <linux/slab.h>
14 #include <linux/stddef.h>
15 #include <linux/interrupt.h>
16 #include <linux/err.h>
17 #include <linux/export.h>
18 
19 #include <asm/io.h>
20 #include <soc/fsl/qe/immap_qe.h>
21 #include <soc/fsl/qe/qe.h>
22 
23 #include <soc/fsl/qe/ucc.h>
24 #include <soc/fsl/qe/ucc_fast.h>
25 
26 void ucc_fast_dump_regs(struct ucc_fast_private * uccf)
27 {
28 	printk(KERN_INFO "UCC%u Fast registers:\n", uccf->uf_info->ucc_num);
29 	printk(KERN_INFO "Base address: 0x%p\n", uccf->uf_regs);
30 
31 	printk(KERN_INFO "gumr  : addr=0x%p, val=0x%08x\n",
32 		  &uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr));
33 	printk(KERN_INFO "upsmr : addr=0x%p, val=0x%08x\n",
34 		  &uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr));
35 	printk(KERN_INFO "utodr : addr=0x%p, val=0x%04x\n",
36 		  &uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr));
37 	printk(KERN_INFO "udsr  : addr=0x%p, val=0x%04x\n",
38 		  &uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr));
39 	printk(KERN_INFO "ucce  : addr=0x%p, val=0x%08x\n",
40 		  &uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce));
41 	printk(KERN_INFO "uccm  : addr=0x%p, val=0x%08x\n",
42 		  &uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm));
43 	printk(KERN_INFO "uccs  : addr=0x%p, val=0x%02x\n",
44 		  &uccf->uf_regs->uccs, in_8(&uccf->uf_regs->uccs));
45 	printk(KERN_INFO "urfb  : addr=0x%p, val=0x%08x\n",
46 		  &uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb));
47 	printk(KERN_INFO "urfs  : addr=0x%p, val=0x%04x\n",
48 		  &uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs));
49 	printk(KERN_INFO "urfet : addr=0x%p, val=0x%04x\n",
50 		  &uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet));
51 	printk(KERN_INFO "urfset: addr=0x%p, val=0x%04x\n",
52 		  &uccf->uf_regs->urfset, in_be16(&uccf->uf_regs->urfset));
53 	printk(KERN_INFO "utfb  : addr=0x%p, val=0x%08x\n",
54 		  &uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb));
55 	printk(KERN_INFO "utfs  : addr=0x%p, val=0x%04x\n",
56 		  &uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs));
57 	printk(KERN_INFO "utfet : addr=0x%p, val=0x%04x\n",
58 		  &uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet));
59 	printk(KERN_INFO "utftt : addr=0x%p, val=0x%04x\n",
60 		  &uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt));
61 	printk(KERN_INFO "utpt  : addr=0x%p, val=0x%04x\n",
62 		  &uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt));
63 	printk(KERN_INFO "urtry : addr=0x%p, val=0x%08x\n",
64 		  &uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry));
65 	printk(KERN_INFO "guemr : addr=0x%p, val=0x%02x\n",
66 		  &uccf->uf_regs->guemr, in_8(&uccf->uf_regs->guemr));
67 }
68 EXPORT_SYMBOL(ucc_fast_dump_regs);
69 
70 u32 ucc_fast_get_qe_cr_subblock(int uccf_num)
71 {
72 	switch (uccf_num) {
73 	case 0: return QE_CR_SUBBLOCK_UCCFAST1;
74 	case 1: return QE_CR_SUBBLOCK_UCCFAST2;
75 	case 2: return QE_CR_SUBBLOCK_UCCFAST3;
76 	case 3: return QE_CR_SUBBLOCK_UCCFAST4;
77 	case 4: return QE_CR_SUBBLOCK_UCCFAST5;
78 	case 5: return QE_CR_SUBBLOCK_UCCFAST6;
79 	case 6: return QE_CR_SUBBLOCK_UCCFAST7;
80 	case 7: return QE_CR_SUBBLOCK_UCCFAST8;
81 	default: return QE_CR_SUBBLOCK_INVALID;
82 	}
83 }
84 EXPORT_SYMBOL(ucc_fast_get_qe_cr_subblock);
85 
86 void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf)
87 {
88 	out_be16(&uccf->uf_regs->utodr, UCC_FAST_TOD);
89 }
90 EXPORT_SYMBOL(ucc_fast_transmit_on_demand);
91 
92 void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode)
93 {
94 	struct ucc_fast __iomem *uf_regs;
95 	u32 gumr;
96 
97 	uf_regs = uccf->uf_regs;
98 
99 	/* Enable reception and/or transmission on this UCC. */
100 	gumr = in_be32(&uf_regs->gumr);
101 	if (mode & COMM_DIR_TX) {
102 		gumr |= UCC_FAST_GUMR_ENT;
103 		uccf->enabled_tx = 1;
104 	}
105 	if (mode & COMM_DIR_RX) {
106 		gumr |= UCC_FAST_GUMR_ENR;
107 		uccf->enabled_rx = 1;
108 	}
109 	out_be32(&uf_regs->gumr, gumr);
110 }
111 EXPORT_SYMBOL(ucc_fast_enable);
112 
113 void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode)
114 {
115 	struct ucc_fast __iomem *uf_regs;
116 	u32 gumr;
117 
118 	uf_regs = uccf->uf_regs;
119 
120 	/* Disable reception and/or transmission on this UCC. */
121 	gumr = in_be32(&uf_regs->gumr);
122 	if (mode & COMM_DIR_TX) {
123 		gumr &= ~UCC_FAST_GUMR_ENT;
124 		uccf->enabled_tx = 0;
125 	}
126 	if (mode & COMM_DIR_RX) {
127 		gumr &= ~UCC_FAST_GUMR_ENR;
128 		uccf->enabled_rx = 0;
129 	}
130 	out_be32(&uf_regs->gumr, gumr);
131 }
132 EXPORT_SYMBOL(ucc_fast_disable);
133 
134 int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret)
135 {
136 	struct ucc_fast_private *uccf;
137 	struct ucc_fast __iomem *uf_regs;
138 	u32 gumr;
139 	int ret;
140 
141 	if (!uf_info)
142 		return -EINVAL;
143 
144 	/* check if the UCC port number is in range. */
145 	if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) {
146 		printk(KERN_ERR "%s: illegal UCC number\n", __func__);
147 		return -EINVAL;
148 	}
149 
150 	/* Check that 'max_rx_buf_length' is properly aligned (4). */
151 	if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) {
152 		printk(KERN_ERR "%s: max_rx_buf_length not aligned\n",
153 			__func__);
154 		return -EINVAL;
155 	}
156 
157 	/* Validate Virtual Fifo register values */
158 	if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) {
159 		printk(KERN_ERR "%s: urfs is too small\n", __func__);
160 		return -EINVAL;
161 	}
162 
163 	if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
164 		printk(KERN_ERR "%s: urfs is not aligned\n", __func__);
165 		return -EINVAL;
166 	}
167 
168 	if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
169 		printk(KERN_ERR "%s: urfet is not aligned.\n", __func__);
170 		return -EINVAL;
171 	}
172 
173 	if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
174 		printk(KERN_ERR "%s: urfset is not aligned\n", __func__);
175 		return -EINVAL;
176 	}
177 
178 	if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
179 		printk(KERN_ERR "%s: utfs is not aligned\n", __func__);
180 		return -EINVAL;
181 	}
182 
183 	if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
184 		printk(KERN_ERR "%s: utfet is not aligned\n", __func__);
185 		return -EINVAL;
186 	}
187 
188 	if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
189 		printk(KERN_ERR "%s: utftt is not aligned\n", __func__);
190 		return -EINVAL;
191 	}
192 
193 	uccf = kzalloc(sizeof(struct ucc_fast_private), GFP_KERNEL);
194 	if (!uccf) {
195 		printk(KERN_ERR "%s: Cannot allocate private data\n",
196 			__func__);
197 		return -ENOMEM;
198 	}
199 
200 	/* Fill fast UCC structure */
201 	uccf->uf_info = uf_info;
202 	/* Set the PHY base address */
203 	uccf->uf_regs = ioremap(uf_info->regs, sizeof(struct ucc_fast));
204 	if (uccf->uf_regs == NULL) {
205 		printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
206 		kfree(uccf);
207 		return -ENOMEM;
208 	}
209 
210 	uccf->enabled_tx = 0;
211 	uccf->enabled_rx = 0;
212 	uccf->stopped_tx = 0;
213 	uccf->stopped_rx = 0;
214 	uf_regs = uccf->uf_regs;
215 	uccf->p_ucce = &uf_regs->ucce;
216 	uccf->p_uccm = &uf_regs->uccm;
217 #ifdef CONFIG_UGETH_TX_ON_DEMAND
218 	uccf->p_utodr = &uf_regs->utodr;
219 #endif
220 #ifdef STATISTICS
221 	uccf->tx_frames = 0;
222 	uccf->rx_frames = 0;
223 	uccf->rx_discarded = 0;
224 #endif				/* STATISTICS */
225 
226 	/* Set UCC to fast type */
227 	ret = ucc_set_type(uf_info->ucc_num, UCC_SPEED_TYPE_FAST);
228 	if (ret) {
229 		printk(KERN_ERR "%s: cannot set UCC type\n", __func__);
230 		ucc_fast_free(uccf);
231 		return ret;
232 	}
233 
234 	uccf->mrblr = uf_info->max_rx_buf_length;
235 
236 	/* Set GUMR */
237 	/* For more details see the hardware spec. */
238 	gumr = uf_info->ttx_trx;
239 	if (uf_info->tci)
240 		gumr |= UCC_FAST_GUMR_TCI;
241 	if (uf_info->cdp)
242 		gumr |= UCC_FAST_GUMR_CDP;
243 	if (uf_info->ctsp)
244 		gumr |= UCC_FAST_GUMR_CTSP;
245 	if (uf_info->cds)
246 		gumr |= UCC_FAST_GUMR_CDS;
247 	if (uf_info->ctss)
248 		gumr |= UCC_FAST_GUMR_CTSS;
249 	if (uf_info->txsy)
250 		gumr |= UCC_FAST_GUMR_TXSY;
251 	if (uf_info->rsyn)
252 		gumr |= UCC_FAST_GUMR_RSYN;
253 	gumr |= uf_info->synl;
254 	if (uf_info->rtsm)
255 		gumr |= UCC_FAST_GUMR_RTSM;
256 	gumr |= uf_info->renc;
257 	if (uf_info->revd)
258 		gumr |= UCC_FAST_GUMR_REVD;
259 	gumr |= uf_info->tenc;
260 	gumr |= uf_info->tcrc;
261 	gumr |= uf_info->mode;
262 	out_be32(&uf_regs->gumr, gumr);
263 
264 	/* Allocate memory for Tx Virtual Fifo */
265 	uccf->ucc_fast_tx_virtual_fifo_base_offset =
266 	    qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
267 	if (IS_ERR_VALUE(uccf->ucc_fast_tx_virtual_fifo_base_offset)) {
268 		printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO\n",
269 			__func__);
270 		uccf->ucc_fast_tx_virtual_fifo_base_offset = 0;
271 		ucc_fast_free(uccf);
272 		return -ENOMEM;
273 	}
274 
275 	/* Allocate memory for Rx Virtual Fifo */
276 	uccf->ucc_fast_rx_virtual_fifo_base_offset =
277 		qe_muram_alloc(uf_info->urfs +
278 			   UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR,
279 			   UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
280 	if (IS_ERR_VALUE(uccf->ucc_fast_rx_virtual_fifo_base_offset)) {
281 		printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO\n",
282 			__func__);
283 		uccf->ucc_fast_rx_virtual_fifo_base_offset = 0;
284 		ucc_fast_free(uccf);
285 		return -ENOMEM;
286 	}
287 
288 	/* Set Virtual Fifo registers */
289 	out_be16(&uf_regs->urfs, uf_info->urfs);
290 	out_be16(&uf_regs->urfet, uf_info->urfet);
291 	out_be16(&uf_regs->urfset, uf_info->urfset);
292 	out_be16(&uf_regs->utfs, uf_info->utfs);
293 	out_be16(&uf_regs->utfet, uf_info->utfet);
294 	out_be16(&uf_regs->utftt, uf_info->utftt);
295 	/* utfb, urfb are offsets from MURAM base */
296 	out_be32(&uf_regs->utfb, uccf->ucc_fast_tx_virtual_fifo_base_offset);
297 	out_be32(&uf_regs->urfb, uccf->ucc_fast_rx_virtual_fifo_base_offset);
298 
299 	/* Mux clocking */
300 	/* Grant Support */
301 	ucc_set_qe_mux_grant(uf_info->ucc_num, uf_info->grant_support);
302 	/* Breakpoint Support */
303 	ucc_set_qe_mux_bkpt(uf_info->ucc_num, uf_info->brkpt_support);
304 	/* Set Tsa or NMSI mode. */
305 	ucc_set_qe_mux_tsa(uf_info->ucc_num, uf_info->tsa);
306 	/* If NMSI (not Tsa), set Tx and Rx clock. */
307 	if (!uf_info->tsa) {
308 		/* Rx clock routing */
309 		if ((uf_info->rx_clock != QE_CLK_NONE) &&
310 		    ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->rx_clock,
311 					COMM_DIR_RX)) {
312 			printk(KERN_ERR "%s: illegal value for RX clock\n",
313 			       __func__);
314 			ucc_fast_free(uccf);
315 			return -EINVAL;
316 		}
317 		/* Tx clock routing */
318 		if ((uf_info->tx_clock != QE_CLK_NONE) &&
319 		    ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->tx_clock,
320 					COMM_DIR_TX)) {
321 			printk(KERN_ERR "%s: illegal value for TX clock\n",
322 			       __func__);
323 			ucc_fast_free(uccf);
324 			return -EINVAL;
325 		}
326 	} else {
327 		/* tdm Rx clock routing */
328 		if ((uf_info->rx_clock != QE_CLK_NONE) &&
329 		    ucc_set_tdm_rxtx_clk(uf_info->tdm_num, uf_info->rx_clock,
330 					 COMM_DIR_RX)) {
331 			pr_err("%s: illegal value for RX clock", __func__);
332 			ucc_fast_free(uccf);
333 			return -EINVAL;
334 		}
335 
336 		/* tdm Tx clock routing */
337 		if ((uf_info->tx_clock != QE_CLK_NONE) &&
338 		    ucc_set_tdm_rxtx_clk(uf_info->tdm_num, uf_info->tx_clock,
339 					 COMM_DIR_TX)) {
340 			pr_err("%s: illegal value for TX clock", __func__);
341 			ucc_fast_free(uccf);
342 			return -EINVAL;
343 		}
344 
345 		/* tdm Rx sync clock routing */
346 		if ((uf_info->rx_sync != QE_CLK_NONE) &&
347 		    ucc_set_tdm_rxtx_sync(uf_info->tdm_num, uf_info->rx_sync,
348 					  COMM_DIR_RX)) {
349 			pr_err("%s: illegal value for RX clock", __func__);
350 			ucc_fast_free(uccf);
351 			return -EINVAL;
352 		}
353 
354 		/* tdm Tx sync clock routing */
355 		if ((uf_info->tx_sync != QE_CLK_NONE) &&
356 		    ucc_set_tdm_rxtx_sync(uf_info->tdm_num, uf_info->tx_sync,
357 					  COMM_DIR_TX)) {
358 			pr_err("%s: illegal value for TX clock", __func__);
359 			ucc_fast_free(uccf);
360 			return -EINVAL;
361 		}
362 	}
363 
364 	/* Set interrupt mask register at UCC level. */
365 	out_be32(&uf_regs->uccm, uf_info->uccm_mask);
366 
367 	/* First, clear anything pending at UCC level,
368 	 * otherwise, old garbage may come through
369 	 * as soon as the dam is opened. */
370 
371 	/* Writing '1' clears */
372 	out_be32(&uf_regs->ucce, 0xffffffff);
373 
374 	*uccf_ret = uccf;
375 	return 0;
376 }
377 EXPORT_SYMBOL(ucc_fast_init);
378 
379 void ucc_fast_free(struct ucc_fast_private * uccf)
380 {
381 	if (!uccf)
382 		return;
383 
384 	if (uccf->ucc_fast_tx_virtual_fifo_base_offset)
385 		qe_muram_free(uccf->ucc_fast_tx_virtual_fifo_base_offset);
386 
387 	if (uccf->ucc_fast_rx_virtual_fifo_base_offset)
388 		qe_muram_free(uccf->ucc_fast_rx_virtual_fifo_base_offset);
389 
390 	if (uccf->uf_regs)
391 		iounmap(uccf->uf_regs);
392 
393 	kfree(uccf);
394 }
395 EXPORT_SYMBOL(ucc_fast_free);
396