xref: /openbmc/linux/drivers/soc/fsl/qbman/dpaa_sys.c (revision 018f336f)
1 /* Copyright 2017 NXP Semiconductor, Inc.
2  *
3  * Redistribution and use in source and binary forms, with or without
4  * modification, are permitted provided that the following conditions are met:
5  *     * Redistributions of source code must retain the above copyright
6  *	 notice, this list of conditions and the following disclaimer.
7  *     * Redistributions in binary form must reproduce the above copyright
8  *	 notice, this list of conditions and the following disclaimer in the
9  *	 documentation and/or other materials provided with the distribution.
10  *     * Neither the name of NXP Semiconductor nor the
11  *	 names of its contributors may be used to endorse or promote products
12  *	 derived from this software without specific prior written permission.
13  *
14  * ALTERNATIVELY, this software may be distributed under the terms of the
15  * GNU General Public License ("GPL") as published by the Free Software
16  * Foundation, either version 2 of that License or (at your option) any
17  * later version.
18  *
19  * THIS SOFTWARE IS PROVIDED BY NXP Semiconductor ``AS IS'' AND ANY
20  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
21  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
22  * DISCLAIMED. IN NO EVENT SHALL NXP Semiconductor BE LIABLE FOR ANY
23  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
24  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
25  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
26  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
27  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
28  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
29  */
30 
31 #include <linux/dma-mapping.h>
32 #include "dpaa_sys.h"
33 
34 /*
35  * Initialize a devices private memory region
36  */
37 int qbman_init_private_mem(struct device *dev, int idx, dma_addr_t *addr,
38 				size_t *size)
39 {
40 	struct device_node *mem_node;
41 	struct reserved_mem *rmem;
42 	int err;
43 	__be32 *res_array;
44 
45 	mem_node = of_parse_phandle(dev->of_node, "memory-region", idx);
46 	if (!mem_node) {
47 		dev_err(dev, "No memory-region found for index %d\n", idx);
48 		return -ENODEV;
49 	}
50 
51 	rmem = of_reserved_mem_lookup(mem_node);
52 	if (!rmem) {
53 		dev_err(dev, "of_reserved_mem_lookup() returned NULL\n");
54 		return -ENODEV;
55 	}
56 	*addr = rmem->base;
57 	*size = rmem->size;
58 
59 	/*
60 	 * Check if the reg property exists - if not insert the node
61 	 * so upon kexec() the same memory region address will be preserved.
62 	 * This is needed because QBMan HW does not allow the base address/
63 	 * size to be modified once set.
64 	 */
65 	if (!of_property_present(mem_node, "reg")) {
66 		struct property *prop;
67 
68 		prop = devm_kzalloc(dev, sizeof(*prop), GFP_KERNEL);
69 		if (!prop)
70 			return -ENOMEM;
71 		prop->value = res_array = devm_kzalloc(dev, sizeof(__be32) * 4,
72 						       GFP_KERNEL);
73 		if (!prop->value)
74 			return -ENOMEM;
75 		res_array[0] = cpu_to_be32(upper_32_bits(*addr));
76 		res_array[1] = cpu_to_be32(lower_32_bits(*addr));
77 		res_array[2] = cpu_to_be32(upper_32_bits(*size));
78 		res_array[3] = cpu_to_be32(lower_32_bits(*size));
79 		prop->length = sizeof(__be32) * 4;
80 		prop->name = devm_kstrdup(dev, "reg", GFP_KERNEL);
81 		if (!prop->name)
82 			return -ENOMEM;
83 		err = of_add_property(mem_node, prop);
84 		if (err)
85 			return err;
86 	}
87 
88 	return 0;
89 }
90