1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Broadcom STB SoCs Bus Unit Interface controls 4 * 5 * Copyright (C) 2015, Broadcom Corporation 6 */ 7 8 #define pr_fmt(fmt) "brcmstb: " KBUILD_MODNAME ": " fmt 9 10 #include <linux/kernel.h> 11 #include <linux/io.h> 12 #include <linux/of_address.h> 13 #include <linux/syscore_ops.h> 14 #include <linux/soc/brcmstb/brcmstb.h> 15 16 #define RACENPREF_MASK 0x3 17 #define RACPREFINST_SHIFT 0 18 #define RACENINST_SHIFT 2 19 #define RACPREFDATA_SHIFT 4 20 #define RACENDATA_SHIFT 6 21 #define RAC_CPU_SHIFT 8 22 #define RACCFG_MASK 0xff 23 #define DPREF_LINE_2_SHIFT 24 24 #define DPREF_LINE_2_MASK 0xff 25 26 /* Bitmask to enable instruction and data prefetching with a 256-bytes stride */ 27 #define RAC_DATA_INST_EN_MASK (1 << RACPREFINST_SHIFT | \ 28 RACENPREF_MASK << RACENINST_SHIFT | \ 29 1 << RACPREFDATA_SHIFT | \ 30 RACENPREF_MASK << RACENDATA_SHIFT) 31 32 #define CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK 0x70000000 33 #define CPU_CREDIT_REG_MCPx_READ_CRED_MASK 0xf 34 #define CPU_CREDIT_REG_MCPx_WRITE_CRED_MASK 0xf 35 #define CPU_CREDIT_REG_MCPx_READ_CRED_SHIFT(x) ((x) * 8) 36 #define CPU_CREDIT_REG_MCPx_WRITE_CRED_SHIFT(x) (((x) * 8) + 4) 37 38 #define CPU_MCP_FLOW_REG_MCPx_RDBUFF_CRED_SHIFT(x) ((x) * 8) 39 #define CPU_MCP_FLOW_REG_MCPx_RDBUFF_CRED_MASK 0xff 40 41 #define CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_THRESHOLD_MASK 0xf 42 #define CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_TIMEOUT_MASK 0xf 43 #define CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_TIMEOUT_SHIFT 4 44 #define CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_ENABLE BIT(8) 45 46 static void __iomem *cpubiuctrl_base; 47 static bool mcp_wr_pairing_en; 48 static const int *cpubiuctrl_regs; 49 50 enum cpubiuctrl_regs { 51 CPU_CREDIT_REG = 0, 52 CPU_MCP_FLOW_REG, 53 CPU_WRITEBACK_CTRL_REG, 54 RAC_CONFIG0_REG, 55 RAC_CONFIG1_REG, 56 NUM_CPU_BIUCTRL_REGS, 57 }; 58 59 static inline u32 cbc_readl(int reg) 60 { 61 int offset = cpubiuctrl_regs[reg]; 62 63 if (offset == -1 || 64 (IS_ENABLED(CONFIG_CACHE_B15_RAC) && reg >= RAC_CONFIG0_REG)) 65 return (u32)-1; 66 67 return readl_relaxed(cpubiuctrl_base + offset); 68 } 69 70 static inline void cbc_writel(u32 val, int reg) 71 { 72 int offset = cpubiuctrl_regs[reg]; 73 74 if (offset == -1 || 75 (IS_ENABLED(CONFIG_CACHE_B15_RAC) && reg >= RAC_CONFIG0_REG)) 76 return; 77 78 writel(val, cpubiuctrl_base + offset); 79 } 80 81 static const int b15_cpubiuctrl_regs[] = { 82 [CPU_CREDIT_REG] = 0x184, 83 [CPU_MCP_FLOW_REG] = -1, 84 [CPU_WRITEBACK_CTRL_REG] = -1, 85 [RAC_CONFIG0_REG] = -1, 86 [RAC_CONFIG1_REG] = -1, 87 }; 88 89 /* Odd cases, e.g: 7260A0 */ 90 static const int b53_cpubiuctrl_no_wb_regs[] = { 91 [CPU_CREDIT_REG] = 0x0b0, 92 [CPU_MCP_FLOW_REG] = 0x0b4, 93 [CPU_WRITEBACK_CTRL_REG] = -1, 94 [RAC_CONFIG0_REG] = 0x78, 95 [RAC_CONFIG1_REG] = 0x7c, 96 }; 97 98 static const int b53_cpubiuctrl_regs[] = { 99 [CPU_CREDIT_REG] = 0x0b0, 100 [CPU_MCP_FLOW_REG] = 0x0b4, 101 [CPU_WRITEBACK_CTRL_REG] = 0x22c, 102 [RAC_CONFIG0_REG] = 0x78, 103 [RAC_CONFIG1_REG] = 0x7c, 104 }; 105 106 static const int a72_cpubiuctrl_regs[] = { 107 [CPU_CREDIT_REG] = 0x18, 108 [CPU_MCP_FLOW_REG] = 0x1c, 109 [CPU_WRITEBACK_CTRL_REG] = 0x20, 110 [RAC_CONFIG0_REG] = 0x08, 111 [RAC_CONFIG1_REG] = 0x0c, 112 }; 113 114 static int __init mcp_write_pairing_set(void) 115 { 116 u32 creds = 0; 117 118 if (!cpubiuctrl_base) 119 return -1; 120 121 creds = cbc_readl(CPU_CREDIT_REG); 122 if (mcp_wr_pairing_en) { 123 pr_info("MCP: Enabling write pairing\n"); 124 cbc_writel(creds | CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK, 125 CPU_CREDIT_REG); 126 } else if (creds & CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK) { 127 pr_info("MCP: Disabling write pairing\n"); 128 cbc_writel(creds & ~CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK, 129 CPU_CREDIT_REG); 130 } else { 131 pr_info("MCP: Write pairing already disabled\n"); 132 } 133 134 return 0; 135 } 136 137 static const u32 a72_b53_mach_compat[] = { 138 0x7211, 139 0x7216, 140 0x72164, 141 0x72165, 142 0x7255, 143 0x7260, 144 0x7268, 145 0x7271, 146 0x7278, 147 }; 148 149 /* The read-ahead cache present in the Brahma-B53 CPU is a special piece of 150 * hardware after the integrated L2 cache of the B53 CPU complex whose purpose 151 * is to prefetch instruction and/or data with a line size of either 64 bytes 152 * or 256 bytes. The rationale is that the data-bus of the CPU interface is 153 * optimized for 256-byte transactions, and enabling the read-ahead cache 154 * provides a significant performance boost (typically twice the performance 155 * for a memcpy benchmark application). 156 * 157 * The read-ahead cache is transparent for Virtual Address cache maintenance 158 * operations: IC IVAU, DC IVAC, DC CVAC, DC CVAU and DC CIVAC. So no special 159 * handling is needed for the DMA API above and beyond what is included in the 160 * arm64 implementation. 161 * 162 * In addition, since the Point of Unification is typically between L1 and L2 163 * for the Brahma-B53 processor no special read-ahead cache handling is needed 164 * for the IC IALLU and IC IALLUIS cache maintenance operations. 165 * 166 * However, it is not possible to specify the cache level (L3) for the cache 167 * maintenance instructions operating by set/way to operate on the read-ahead 168 * cache. The read-ahead cache will maintain coherency when inner cache lines 169 * are cleaned by set/way, but if it is necessary to invalidate inner cache 170 * lines by set/way to maintain coherency with system masters operating on 171 * shared memory that does not have hardware support for coherency, then it 172 * will also be necessary to explicitly invalidate the read-ahead cache. 173 */ 174 static void __init a72_b53_rac_enable_all(struct device_node *np) 175 { 176 unsigned int cpu; 177 u32 enable = 0, pref_dist, shift; 178 179 if (IS_ENABLED(CONFIG_CACHE_B15_RAC)) 180 return; 181 182 if (WARN(num_possible_cpus() > 4, "RAC only supports 4 CPUs\n")) 183 return; 184 185 pref_dist = cbc_readl(RAC_CONFIG1_REG); 186 for_each_possible_cpu(cpu) { 187 shift = cpu * RAC_CPU_SHIFT + RACPREFDATA_SHIFT; 188 enable |= RAC_DATA_INST_EN_MASK << (cpu * RAC_CPU_SHIFT); 189 if (cpubiuctrl_regs == a72_cpubiuctrl_regs) { 190 enable &= ~(RACENPREF_MASK << shift); 191 enable |= 3 << shift; 192 pref_dist |= 1 << (cpu + DPREF_LINE_2_SHIFT); 193 } 194 } 195 196 cbc_writel(enable, RAC_CONFIG0_REG); 197 cbc_writel(pref_dist, RAC_CONFIG1_REG); 198 199 pr_info("%pOF: Broadcom %s read-ahead cache\n", 200 np, cpubiuctrl_regs == a72_cpubiuctrl_regs ? 201 "Cortex-A72" : "Brahma-B53"); 202 } 203 204 static void __init mcp_a72_b53_set(void) 205 { 206 unsigned int i; 207 u32 reg; 208 209 reg = brcmstb_get_family_id(); 210 211 for (i = 0; i < ARRAY_SIZE(a72_b53_mach_compat); i++) { 212 if (BRCM_ID(reg) == a72_b53_mach_compat[i]) 213 break; 214 } 215 216 if (i == ARRAY_SIZE(a72_b53_mach_compat)) 217 return; 218 219 /* Set all 3 MCP interfaces to 8 credits */ 220 reg = cbc_readl(CPU_CREDIT_REG); 221 for (i = 0; i < 3; i++) { 222 reg &= ~(CPU_CREDIT_REG_MCPx_WRITE_CRED_MASK << 223 CPU_CREDIT_REG_MCPx_WRITE_CRED_SHIFT(i)); 224 reg &= ~(CPU_CREDIT_REG_MCPx_READ_CRED_MASK << 225 CPU_CREDIT_REG_MCPx_READ_CRED_SHIFT(i)); 226 reg |= 8 << CPU_CREDIT_REG_MCPx_WRITE_CRED_SHIFT(i); 227 reg |= 8 << CPU_CREDIT_REG_MCPx_READ_CRED_SHIFT(i); 228 } 229 cbc_writel(reg, CPU_CREDIT_REG); 230 231 /* Max out the number of in-flight Jwords reads on the MCP interface */ 232 reg = cbc_readl(CPU_MCP_FLOW_REG); 233 for (i = 0; i < 3; i++) 234 reg |= CPU_MCP_FLOW_REG_MCPx_RDBUFF_CRED_MASK << 235 CPU_MCP_FLOW_REG_MCPx_RDBUFF_CRED_SHIFT(i); 236 cbc_writel(reg, CPU_MCP_FLOW_REG); 237 238 /* Enable writeback throttling, set timeout to 128 cycles, 256 cycles 239 * threshold 240 */ 241 reg = cbc_readl(CPU_WRITEBACK_CTRL_REG); 242 reg |= CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_ENABLE; 243 reg &= ~CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_THRESHOLD_MASK; 244 reg &= ~(CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_TIMEOUT_MASK << 245 CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_TIMEOUT_SHIFT); 246 reg |= 8; 247 reg |= 7 << CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_TIMEOUT_SHIFT; 248 cbc_writel(reg, CPU_WRITEBACK_CTRL_REG); 249 } 250 251 static int __init setup_hifcpubiuctrl_regs(struct device_node *np) 252 { 253 struct device_node *cpu_dn; 254 u32 family_id; 255 int ret = 0; 256 257 cpubiuctrl_base = of_iomap(np, 0); 258 if (!cpubiuctrl_base) { 259 pr_err("failed to remap BIU control base\n"); 260 ret = -ENOMEM; 261 goto out; 262 } 263 264 mcp_wr_pairing_en = of_property_read_bool(np, "brcm,write-pairing"); 265 266 cpu_dn = of_get_cpu_node(0, NULL); 267 if (!cpu_dn) { 268 pr_err("failed to obtain CPU device node\n"); 269 ret = -ENODEV; 270 goto out; 271 } 272 273 if (of_device_is_compatible(cpu_dn, "brcm,brahma-b15")) 274 cpubiuctrl_regs = b15_cpubiuctrl_regs; 275 else if (of_device_is_compatible(cpu_dn, "brcm,brahma-b53")) 276 cpubiuctrl_regs = b53_cpubiuctrl_regs; 277 else if (of_device_is_compatible(cpu_dn, "arm,cortex-a72")) 278 cpubiuctrl_regs = a72_cpubiuctrl_regs; 279 else { 280 pr_err("unsupported CPU\n"); 281 ret = -EINVAL; 282 } 283 of_node_put(cpu_dn); 284 285 family_id = brcmstb_get_family_id(); 286 if (BRCM_ID(family_id) == 0x7260 && BRCM_REV(family_id) == 0) 287 cpubiuctrl_regs = b53_cpubiuctrl_no_wb_regs; 288 out: 289 of_node_put(np); 290 return ret; 291 } 292 293 #ifdef CONFIG_PM_SLEEP 294 static u32 cpubiuctrl_reg_save[NUM_CPU_BIUCTRL_REGS]; 295 296 static int brcmstb_cpu_credit_reg_suspend(void) 297 { 298 unsigned int i; 299 300 if (!cpubiuctrl_base) 301 return 0; 302 303 for (i = 0; i < NUM_CPU_BIUCTRL_REGS; i++) 304 cpubiuctrl_reg_save[i] = cbc_readl(i); 305 306 return 0; 307 } 308 309 static void brcmstb_cpu_credit_reg_resume(void) 310 { 311 unsigned int i; 312 313 if (!cpubiuctrl_base) 314 return; 315 316 for (i = 0; i < NUM_CPU_BIUCTRL_REGS; i++) 317 cbc_writel(cpubiuctrl_reg_save[i], i); 318 } 319 320 static struct syscore_ops brcmstb_cpu_credit_syscore_ops = { 321 .suspend = brcmstb_cpu_credit_reg_suspend, 322 .resume = brcmstb_cpu_credit_reg_resume, 323 }; 324 #endif 325 326 327 static int __init brcmstb_biuctrl_init(void) 328 { 329 struct device_node *np; 330 int ret; 331 332 /* We might be running on a multi-platform kernel, don't make this a 333 * fatal error, just bail out early 334 */ 335 np = of_find_compatible_node(NULL, NULL, "brcm,brcmstb-cpu-biu-ctrl"); 336 if (!np) 337 return 0; 338 339 ret = setup_hifcpubiuctrl_regs(np); 340 if (ret) 341 return ret; 342 343 ret = mcp_write_pairing_set(); 344 if (ret) { 345 pr_err("MCP: Unable to disable write pairing!\n"); 346 return ret; 347 } 348 349 a72_b53_rac_enable_all(np); 350 mcp_a72_b53_set(); 351 #ifdef CONFIG_PM_SLEEP 352 register_syscore_ops(&brcmstb_cpu_credit_syscore_ops); 353 #endif 354 return 0; 355 } 356 early_initcall(brcmstb_biuctrl_init); 357