1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Broadcom STB SoCs Bus Unit Interface controls 4 * 5 * Copyright (C) 2015, Broadcom Corporation 6 */ 7 8 #define pr_fmt(fmt) "brcmstb: " KBUILD_MODNAME ": " fmt 9 10 #include <linux/kernel.h> 11 #include <linux/io.h> 12 #include <linux/of_address.h> 13 #include <linux/syscore_ops.h> 14 #include <linux/soc/brcmstb/brcmstb.h> 15 16 #define RACENPREF_MASK 0x3 17 #define RACPREFINST_SHIFT 0 18 #define RACENINST_SHIFT 2 19 #define RACPREFDATA_SHIFT 4 20 #define RACENDATA_SHIFT 6 21 #define RAC_CPU_SHIFT 8 22 #define RACCFG_MASK 0xff 23 #define DPREF_LINE_2_SHIFT 24 24 #define DPREF_LINE_2_MASK 0xff 25 26 /* Bitmask to enable instruction and data prefetching with a 256-bytes stride */ 27 #define RAC_DATA_INST_EN_MASK (1 << RACPREFINST_SHIFT | \ 28 RACENPREF_MASK << RACENINST_SHIFT | \ 29 1 << RACPREFDATA_SHIFT | \ 30 RACENPREF_MASK << RACENDATA_SHIFT) 31 32 #define CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK 0x70000000 33 #define CPU_CREDIT_REG_MCPx_READ_CRED_MASK 0xf 34 #define CPU_CREDIT_REG_MCPx_WRITE_CRED_MASK 0xf 35 #define CPU_CREDIT_REG_MCPx_READ_CRED_SHIFT(x) ((x) * 8) 36 #define CPU_CREDIT_REG_MCPx_WRITE_CRED_SHIFT(x) (((x) * 8) + 4) 37 38 #define CPU_MCP_FLOW_REG_MCPx_RDBUFF_CRED_SHIFT(x) ((x) * 8) 39 #define CPU_MCP_FLOW_REG_MCPx_RDBUFF_CRED_MASK 0xff 40 41 #define CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_THRESHOLD_MASK 0xf 42 #define CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_TIMEOUT_MASK 0xf 43 #define CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_TIMEOUT_SHIFT 4 44 #define CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_ENABLE BIT(8) 45 46 static void __iomem *cpubiuctrl_base; 47 static bool mcp_wr_pairing_en; 48 static const int *cpubiuctrl_regs; 49 50 enum cpubiuctrl_regs { 51 CPU_CREDIT_REG = 0, 52 CPU_MCP_FLOW_REG, 53 CPU_WRITEBACK_CTRL_REG, 54 RAC_CONFIG0_REG, 55 RAC_CONFIG1_REG, 56 NUM_CPU_BIUCTRL_REGS, 57 }; 58 59 static inline u32 cbc_readl(int reg) 60 { 61 int offset = cpubiuctrl_regs[reg]; 62 63 if (offset == -1 || 64 (IS_ENABLED(CONFIG_CACHE_B15_RAC) && reg >= RAC_CONFIG0_REG)) 65 return (u32)-1; 66 67 return readl_relaxed(cpubiuctrl_base + offset); 68 } 69 70 static inline void cbc_writel(u32 val, int reg) 71 { 72 int offset = cpubiuctrl_regs[reg]; 73 74 if (offset == -1 || 75 (IS_ENABLED(CONFIG_CACHE_B15_RAC) && reg >= RAC_CONFIG0_REG)) 76 return; 77 78 writel(val, cpubiuctrl_base + offset); 79 } 80 81 static const int b15_cpubiuctrl_regs[] = { 82 [CPU_CREDIT_REG] = 0x184, 83 [CPU_MCP_FLOW_REG] = -1, 84 [CPU_WRITEBACK_CTRL_REG] = -1, 85 [RAC_CONFIG0_REG] = -1, 86 [RAC_CONFIG1_REG] = -1, 87 }; 88 89 /* Odd cases, e.g: 7260A0 */ 90 static const int b53_cpubiuctrl_no_wb_regs[] = { 91 [CPU_CREDIT_REG] = 0x0b0, 92 [CPU_MCP_FLOW_REG] = 0x0b4, 93 [CPU_WRITEBACK_CTRL_REG] = -1, 94 [RAC_CONFIG0_REG] = 0x78, 95 [RAC_CONFIG1_REG] = 0x7c, 96 }; 97 98 static const int b53_cpubiuctrl_regs[] = { 99 [CPU_CREDIT_REG] = 0x0b0, 100 [CPU_MCP_FLOW_REG] = 0x0b4, 101 [CPU_WRITEBACK_CTRL_REG] = 0x22c, 102 [RAC_CONFIG0_REG] = 0x78, 103 [RAC_CONFIG1_REG] = 0x7c, 104 }; 105 106 static const int a72_cpubiuctrl_regs[] = { 107 [CPU_CREDIT_REG] = 0x18, 108 [CPU_MCP_FLOW_REG] = 0x1c, 109 [CPU_WRITEBACK_CTRL_REG] = 0x20, 110 [RAC_CONFIG0_REG] = 0x08, 111 [RAC_CONFIG1_REG] = 0x0c, 112 }; 113 114 static int __init mcp_write_pairing_set(void) 115 { 116 u32 creds = 0; 117 118 if (!cpubiuctrl_base) 119 return -1; 120 121 creds = cbc_readl(CPU_CREDIT_REG); 122 if (mcp_wr_pairing_en) { 123 pr_info("MCP: Enabling write pairing\n"); 124 cbc_writel(creds | CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK, 125 CPU_CREDIT_REG); 126 } else if (creds & CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK) { 127 pr_info("MCP: Disabling write pairing\n"); 128 cbc_writel(creds & ~CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK, 129 CPU_CREDIT_REG); 130 } else { 131 pr_info("MCP: Write pairing already disabled\n"); 132 } 133 134 return 0; 135 } 136 137 static const u32 a72_b53_mach_compat[] = { 138 0x7211, 139 0x72113, 140 0x72116, 141 0x7216, 142 0x72164, 143 0x72165, 144 0x7255, 145 0x7260, 146 0x7268, 147 0x7271, 148 0x7278, 149 }; 150 151 /* The read-ahead cache present in the Brahma-B53 CPU is a special piece of 152 * hardware after the integrated L2 cache of the B53 CPU complex whose purpose 153 * is to prefetch instruction and/or data with a line size of either 64 bytes 154 * or 256 bytes. The rationale is that the data-bus of the CPU interface is 155 * optimized for 256-byte transactions, and enabling the read-ahead cache 156 * provides a significant performance boost (typically twice the performance 157 * for a memcpy benchmark application). 158 * 159 * The read-ahead cache is transparent for Virtual Address cache maintenance 160 * operations: IC IVAU, DC IVAC, DC CVAC, DC CVAU and DC CIVAC. So no special 161 * handling is needed for the DMA API above and beyond what is included in the 162 * arm64 implementation. 163 * 164 * In addition, since the Point of Unification is typically between L1 and L2 165 * for the Brahma-B53 processor no special read-ahead cache handling is needed 166 * for the IC IALLU and IC IALLUIS cache maintenance operations. 167 * 168 * However, it is not possible to specify the cache level (L3) for the cache 169 * maintenance instructions operating by set/way to operate on the read-ahead 170 * cache. The read-ahead cache will maintain coherency when inner cache lines 171 * are cleaned by set/way, but if it is necessary to invalidate inner cache 172 * lines by set/way to maintain coherency with system masters operating on 173 * shared memory that does not have hardware support for coherency, then it 174 * will also be necessary to explicitly invalidate the read-ahead cache. 175 */ 176 static void __init a72_b53_rac_enable_all(struct device_node *np) 177 { 178 unsigned int cpu; 179 u32 enable = 0, pref_dist, shift; 180 181 if (IS_ENABLED(CONFIG_CACHE_B15_RAC)) 182 return; 183 184 if (WARN(num_possible_cpus() > 4, "RAC only supports 4 CPUs\n")) 185 return; 186 187 pref_dist = cbc_readl(RAC_CONFIG1_REG); 188 for_each_possible_cpu(cpu) { 189 shift = cpu * RAC_CPU_SHIFT + RACPREFDATA_SHIFT; 190 enable |= RAC_DATA_INST_EN_MASK << (cpu * RAC_CPU_SHIFT); 191 if (cpubiuctrl_regs == a72_cpubiuctrl_regs) { 192 enable &= ~(RACENPREF_MASK << shift); 193 enable |= 3 << shift; 194 pref_dist |= 1 << (cpu + DPREF_LINE_2_SHIFT); 195 } 196 } 197 198 cbc_writel(enable, RAC_CONFIG0_REG); 199 cbc_writel(pref_dist, RAC_CONFIG1_REG); 200 201 pr_info("%pOF: Broadcom %s read-ahead cache\n", 202 np, cpubiuctrl_regs == a72_cpubiuctrl_regs ? 203 "Cortex-A72" : "Brahma-B53"); 204 } 205 206 static void __init mcp_a72_b53_set(void) 207 { 208 unsigned int i; 209 u32 reg; 210 211 reg = brcmstb_get_family_id(); 212 213 for (i = 0; i < ARRAY_SIZE(a72_b53_mach_compat); i++) { 214 if (BRCM_ID(reg) == a72_b53_mach_compat[i]) 215 break; 216 } 217 218 if (i == ARRAY_SIZE(a72_b53_mach_compat)) 219 return; 220 221 /* Set all 3 MCP interfaces to 8 credits */ 222 reg = cbc_readl(CPU_CREDIT_REG); 223 for (i = 0; i < 3; i++) { 224 reg &= ~(CPU_CREDIT_REG_MCPx_WRITE_CRED_MASK << 225 CPU_CREDIT_REG_MCPx_WRITE_CRED_SHIFT(i)); 226 reg &= ~(CPU_CREDIT_REG_MCPx_READ_CRED_MASK << 227 CPU_CREDIT_REG_MCPx_READ_CRED_SHIFT(i)); 228 reg |= 8 << CPU_CREDIT_REG_MCPx_WRITE_CRED_SHIFT(i); 229 reg |= 8 << CPU_CREDIT_REG_MCPx_READ_CRED_SHIFT(i); 230 } 231 cbc_writel(reg, CPU_CREDIT_REG); 232 233 /* Max out the number of in-flight Jwords reads on the MCP interface */ 234 reg = cbc_readl(CPU_MCP_FLOW_REG); 235 for (i = 0; i < 3; i++) 236 reg |= CPU_MCP_FLOW_REG_MCPx_RDBUFF_CRED_MASK << 237 CPU_MCP_FLOW_REG_MCPx_RDBUFF_CRED_SHIFT(i); 238 cbc_writel(reg, CPU_MCP_FLOW_REG); 239 240 /* Enable writeback throttling, set timeout to 128 cycles, 256 cycles 241 * threshold 242 */ 243 reg = cbc_readl(CPU_WRITEBACK_CTRL_REG); 244 reg |= CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_ENABLE; 245 reg &= ~CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_THRESHOLD_MASK; 246 reg &= ~(CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_TIMEOUT_MASK << 247 CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_TIMEOUT_SHIFT); 248 reg |= 8; 249 reg |= 7 << CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_TIMEOUT_SHIFT; 250 cbc_writel(reg, CPU_WRITEBACK_CTRL_REG); 251 } 252 253 static int __init setup_hifcpubiuctrl_regs(struct device_node *np) 254 { 255 struct device_node *cpu_dn; 256 u32 family_id; 257 int ret = 0; 258 259 cpubiuctrl_base = of_iomap(np, 0); 260 if (!cpubiuctrl_base) { 261 pr_err("failed to remap BIU control base\n"); 262 ret = -ENOMEM; 263 goto out; 264 } 265 266 mcp_wr_pairing_en = of_property_read_bool(np, "brcm,write-pairing"); 267 268 cpu_dn = of_get_cpu_node(0, NULL); 269 if (!cpu_dn) { 270 pr_err("failed to obtain CPU device node\n"); 271 ret = -ENODEV; 272 goto out; 273 } 274 275 if (of_device_is_compatible(cpu_dn, "brcm,brahma-b15")) 276 cpubiuctrl_regs = b15_cpubiuctrl_regs; 277 else if (of_device_is_compatible(cpu_dn, "brcm,brahma-b53")) 278 cpubiuctrl_regs = b53_cpubiuctrl_regs; 279 else if (of_device_is_compatible(cpu_dn, "arm,cortex-a72")) 280 cpubiuctrl_regs = a72_cpubiuctrl_regs; 281 else { 282 pr_err("unsupported CPU\n"); 283 ret = -EINVAL; 284 } 285 of_node_put(cpu_dn); 286 287 family_id = brcmstb_get_family_id(); 288 if (BRCM_ID(family_id) == 0x7260 && BRCM_REV(family_id) == 0) 289 cpubiuctrl_regs = b53_cpubiuctrl_no_wb_regs; 290 out: 291 return ret; 292 } 293 294 #ifdef CONFIG_PM_SLEEP 295 static u32 cpubiuctrl_reg_save[NUM_CPU_BIUCTRL_REGS]; 296 297 static int brcmstb_cpu_credit_reg_suspend(void) 298 { 299 unsigned int i; 300 301 if (!cpubiuctrl_base) 302 return 0; 303 304 for (i = 0; i < NUM_CPU_BIUCTRL_REGS; i++) 305 cpubiuctrl_reg_save[i] = cbc_readl(i); 306 307 return 0; 308 } 309 310 static void brcmstb_cpu_credit_reg_resume(void) 311 { 312 unsigned int i; 313 314 if (!cpubiuctrl_base) 315 return; 316 317 for (i = 0; i < NUM_CPU_BIUCTRL_REGS; i++) 318 cbc_writel(cpubiuctrl_reg_save[i], i); 319 } 320 321 static struct syscore_ops brcmstb_cpu_credit_syscore_ops = { 322 .suspend = brcmstb_cpu_credit_reg_suspend, 323 .resume = brcmstb_cpu_credit_reg_resume, 324 }; 325 #endif 326 327 328 static int __init brcmstb_biuctrl_init(void) 329 { 330 struct device_node *np; 331 int ret; 332 333 /* We might be running on a multi-platform kernel, don't make this a 334 * fatal error, just bail out early 335 */ 336 np = of_find_compatible_node(NULL, NULL, "brcm,brcmstb-cpu-biu-ctrl"); 337 if (!np) 338 return 0; 339 340 ret = setup_hifcpubiuctrl_regs(np); 341 if (ret) 342 goto out_put; 343 344 ret = mcp_write_pairing_set(); 345 if (ret) { 346 pr_err("MCP: Unable to disable write pairing!\n"); 347 goto out_put; 348 } 349 350 a72_b53_rac_enable_all(np); 351 mcp_a72_b53_set(); 352 #ifdef CONFIG_PM_SLEEP 353 register_syscore_ops(&brcmstb_cpu_credit_syscore_ops); 354 #endif 355 ret = 0; 356 out_put: 357 of_node_put(np); 358 return ret; 359 } 360 early_initcall(brcmstb_biuctrl_init); 361