1 /* 2 * VMware PVSCSI header file 3 * 4 * Copyright (C) 2008-2014, VMware, Inc. All Rights Reserved. 5 * 6 * This program is free software; you can redistribute it and/or modify it 7 * under the terms of the GNU General Public License as published by the 8 * Free Software Foundation; version 2 of the License and no later version. 9 * 10 * This program is distributed in the hope that it will be useful, but 11 * WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or 13 * NON INFRINGEMENT. See the GNU General Public License for more 14 * details. 15 * 16 * You should have received a copy of the GNU General Public License 17 * along with this program; if not, write to the Free Software 18 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. 19 * 20 */ 21 22 #ifndef _VMW_PVSCSI_H_ 23 #define _VMW_PVSCSI_H_ 24 25 #include <linux/types.h> 26 27 #define PVSCSI_DRIVER_VERSION_STRING "1.0.7.0-k" 28 29 #define PVSCSI_MAX_NUM_SG_ENTRIES_PER_SEGMENT 128 30 31 #define MASK(n) ((1 << (n)) - 1) /* make an n-bit mask */ 32 33 #define PCI_DEVICE_ID_VMWARE_PVSCSI 0x07C0 34 35 /* 36 * host adapter status/error codes 37 */ 38 enum HostBusAdapterStatus { 39 BTSTAT_SUCCESS = 0x00, /* CCB complete normally with no errors */ 40 BTSTAT_LINKED_COMMAND_COMPLETED = 0x0a, 41 BTSTAT_LINKED_COMMAND_COMPLETED_WITH_FLAG = 0x0b, 42 BTSTAT_DATA_UNDERRUN = 0x0c, 43 BTSTAT_SELTIMEO = 0x11, /* SCSI selection timeout */ 44 BTSTAT_DATARUN = 0x12, /* data overrun/underrun */ 45 BTSTAT_BUSFREE = 0x13, /* unexpected bus free */ 46 BTSTAT_INVPHASE = 0x14, /* invalid bus phase or sequence 47 * requested by target */ 48 BTSTAT_LUNMISMATCH = 0x17, /* linked CCB has different LUN from 49 * first CCB */ 50 BTSTAT_INVPARAM = 0x1a, /* invalid parameter in CCB or segment 51 * list */ 52 BTSTAT_SENSFAILED = 0x1b, /* auto request sense failed */ 53 BTSTAT_TAGREJECT = 0x1c, /* SCSI II tagged queueing message 54 * rejected by target */ 55 BTSTAT_BADMSG = 0x1d, /* unsupported message received by the 56 * host adapter */ 57 BTSTAT_HAHARDWARE = 0x20, /* host adapter hardware failed */ 58 BTSTAT_NORESPONSE = 0x21, /* target did not respond to SCSI ATN, 59 * sent a SCSI RST */ 60 BTSTAT_SENTRST = 0x22, /* host adapter asserted a SCSI RST */ 61 BTSTAT_RECVRST = 0x23, /* other SCSI devices asserted a SCSI 62 * RST */ 63 BTSTAT_DISCONNECT = 0x24, /* target device reconnected improperly 64 * (w/o tag) */ 65 BTSTAT_BUSRESET = 0x25, /* host adapter issued BUS device reset */ 66 BTSTAT_ABORTQUEUE = 0x26, /* abort queue generated */ 67 BTSTAT_HASOFTWARE = 0x27, /* host adapter software error */ 68 BTSTAT_HATIMEOUT = 0x30, /* host adapter hardware timeout error */ 69 BTSTAT_SCSIPARITY = 0x34, /* SCSI parity error detected */ 70 }; 71 72 /* 73 * SCSI device status values. 74 */ 75 enum ScsiDeviceStatus { 76 SDSTAT_GOOD = 0x00, /* No errors. */ 77 SDSTAT_CHECK = 0x02, /* Check condition. */ 78 }; 79 80 /* 81 * Register offsets. 82 * 83 * These registers are accessible both via i/o space and mm i/o. 84 */ 85 86 enum PVSCSIRegOffset { 87 PVSCSI_REG_OFFSET_COMMAND = 0x0, 88 PVSCSI_REG_OFFSET_COMMAND_DATA = 0x4, 89 PVSCSI_REG_OFFSET_COMMAND_STATUS = 0x8, 90 PVSCSI_REG_OFFSET_LAST_STS_0 = 0x100, 91 PVSCSI_REG_OFFSET_LAST_STS_1 = 0x104, 92 PVSCSI_REG_OFFSET_LAST_STS_2 = 0x108, 93 PVSCSI_REG_OFFSET_LAST_STS_3 = 0x10c, 94 PVSCSI_REG_OFFSET_INTR_STATUS = 0x100c, 95 PVSCSI_REG_OFFSET_INTR_MASK = 0x2010, 96 PVSCSI_REG_OFFSET_KICK_NON_RW_IO = 0x3014, 97 PVSCSI_REG_OFFSET_DEBUG = 0x3018, 98 PVSCSI_REG_OFFSET_KICK_RW_IO = 0x4018, 99 }; 100 101 /* 102 * Virtual h/w commands. 103 */ 104 105 enum PVSCSICommands { 106 PVSCSI_CMD_FIRST = 0, /* has to be first */ 107 108 PVSCSI_CMD_ADAPTER_RESET = 1, 109 PVSCSI_CMD_ISSUE_SCSI = 2, 110 PVSCSI_CMD_SETUP_RINGS = 3, 111 PVSCSI_CMD_RESET_BUS = 4, 112 PVSCSI_CMD_RESET_DEVICE = 5, 113 PVSCSI_CMD_ABORT_CMD = 6, 114 PVSCSI_CMD_CONFIG = 7, 115 PVSCSI_CMD_SETUP_MSG_RING = 8, 116 PVSCSI_CMD_DEVICE_UNPLUG = 9, 117 PVSCSI_CMD_SETUP_REQCALLTHRESHOLD = 10, 118 119 PVSCSI_CMD_LAST = 11 /* has to be last */ 120 }; 121 122 /* 123 * Command descriptor for PVSCSI_CMD_RESET_DEVICE -- 124 */ 125 126 struct PVSCSICmdDescResetDevice { 127 u32 target; 128 u8 lun[8]; 129 } __packed; 130 131 /* 132 * Command descriptor for PVSCSI_CMD_CONFIG -- 133 */ 134 135 struct PVSCSICmdDescConfigCmd { 136 u64 cmpAddr; 137 u64 configPageAddress; 138 u32 configPageNum; 139 u32 _pad; 140 } __packed; 141 142 /* 143 * Command descriptor for PVSCSI_CMD_SETUP_REQCALLTHRESHOLD -- 144 */ 145 146 struct PVSCSICmdDescSetupReqCall { 147 u32 enable; 148 } __packed; 149 150 enum PVSCSIConfigPageType { 151 PVSCSI_CONFIG_PAGE_CONTROLLER = 0x1958, 152 PVSCSI_CONFIG_PAGE_PHY = 0x1959, 153 PVSCSI_CONFIG_PAGE_DEVICE = 0x195a, 154 }; 155 156 enum PVSCSIConfigPageAddressType { 157 PVSCSI_CONFIG_CONTROLLER_ADDRESS = 0x2120, 158 PVSCSI_CONFIG_BUSTARGET_ADDRESS = 0x2121, 159 PVSCSI_CONFIG_PHY_ADDRESS = 0x2122, 160 }; 161 162 /* 163 * Command descriptor for PVSCSI_CMD_ABORT_CMD -- 164 * 165 * - currently does not support specifying the LUN. 166 * - _pad should be 0. 167 */ 168 169 struct PVSCSICmdDescAbortCmd { 170 u64 context; 171 u32 target; 172 u32 _pad; 173 } __packed; 174 175 /* 176 * Command descriptor for PVSCSI_CMD_SETUP_RINGS -- 177 * 178 * Notes: 179 * - reqRingNumPages and cmpRingNumPages need to be power of two. 180 * - reqRingNumPages and cmpRingNumPages need to be different from 0, 181 * - reqRingNumPages and cmpRingNumPages need to be inferior to 182 * PVSCSI_SETUP_RINGS_MAX_NUM_PAGES. 183 */ 184 185 #define PVSCSI_SETUP_RINGS_MAX_NUM_PAGES 32 186 struct PVSCSICmdDescSetupRings { 187 u32 reqRingNumPages; 188 u32 cmpRingNumPages; 189 u64 ringsStatePPN; 190 u64 reqRingPPNs[PVSCSI_SETUP_RINGS_MAX_NUM_PAGES]; 191 u64 cmpRingPPNs[PVSCSI_SETUP_RINGS_MAX_NUM_PAGES]; 192 } __packed; 193 194 /* 195 * Command descriptor for PVSCSI_CMD_SETUP_MSG_RING -- 196 * 197 * Notes: 198 * - this command was not supported in the initial revision of the h/w 199 * interface. Before using it, you need to check that it is supported by 200 * writing PVSCSI_CMD_SETUP_MSG_RING to the 'command' register, then 201 * immediately after read the 'command status' register: 202 * * a value of -1 means that the cmd is NOT supported, 203 * * a value != -1 means that the cmd IS supported. 204 * If it's supported the 'command status' register should return: 205 * sizeof(PVSCSICmdDescSetupMsgRing) / sizeof(u32). 206 * - this command should be issued _after_ the usual SETUP_RINGS so that the 207 * RingsState page is already setup. If not, the command is a nop. 208 * - numPages needs to be a power of two, 209 * - numPages needs to be different from 0, 210 * - _pad should be zero. 211 */ 212 213 #define PVSCSI_SETUP_MSG_RING_MAX_NUM_PAGES 16 214 215 struct PVSCSICmdDescSetupMsgRing { 216 u32 numPages; 217 u32 _pad; 218 u64 ringPPNs[PVSCSI_SETUP_MSG_RING_MAX_NUM_PAGES]; 219 } __packed; 220 221 enum PVSCSIMsgType { 222 PVSCSI_MSG_DEV_ADDED = 0, 223 PVSCSI_MSG_DEV_REMOVED = 1, 224 PVSCSI_MSG_LAST = 2, 225 }; 226 227 /* 228 * Msg descriptor. 229 * 230 * sizeof(struct PVSCSIRingMsgDesc) == 128. 231 * 232 * - type is of type enum PVSCSIMsgType. 233 * - the content of args depend on the type of event being delivered. 234 */ 235 236 struct PVSCSIRingMsgDesc { 237 u32 type; 238 u32 args[31]; 239 } __packed; 240 241 struct PVSCSIMsgDescDevStatusChanged { 242 u32 type; /* PVSCSI_MSG_DEV _ADDED / _REMOVED */ 243 u32 bus; 244 u32 target; 245 u8 lun[8]; 246 u32 pad[27]; 247 } __packed; 248 249 /* 250 * Rings state. 251 * 252 * - the fields: 253 * . msgProdIdx, 254 * . msgConsIdx, 255 * . msgNumEntriesLog2, 256 * .. are only used once the SETUP_MSG_RING cmd has been issued. 257 * - '_pad' helps to ensure that the msg related fields are on their own 258 * cache-line. 259 */ 260 261 struct PVSCSIRingsState { 262 u32 reqProdIdx; 263 u32 reqConsIdx; 264 u32 reqNumEntriesLog2; 265 266 u32 cmpProdIdx; 267 u32 cmpConsIdx; 268 u32 cmpNumEntriesLog2; 269 270 u32 reqCallThreshold; 271 272 u8 _pad[100]; 273 274 u32 msgProdIdx; 275 u32 msgConsIdx; 276 u32 msgNumEntriesLog2; 277 } __packed; 278 279 /* 280 * Request descriptor. 281 * 282 * sizeof(RingReqDesc) = 128 283 * 284 * - context: is a unique identifier of a command. It could normally be any 285 * 64bit value, however we currently store it in the serialNumber variable 286 * of struct SCSI_Command, so we have the following restrictions due to the 287 * way this field is handled in the vmkernel storage stack: 288 * * this value can't be 0, 289 * * the upper 32bit need to be 0 since serialNumber is as a u32. 290 * Currently tracked as PR 292060. 291 * - dataLen: contains the total number of bytes that need to be transferred. 292 * - dataAddr: 293 * * if PVSCSI_FLAG_CMD_WITH_SG_LIST is set: dataAddr is the PA of the first 294 * s/g table segment, each s/g segment is entirely contained on a single 295 * page of physical memory, 296 * * if PVSCSI_FLAG_CMD_WITH_SG_LIST is NOT set, then dataAddr is the PA of 297 * the buffer used for the DMA transfer, 298 * - flags: 299 * * PVSCSI_FLAG_CMD_WITH_SG_LIST: see dataAddr above, 300 * * PVSCSI_FLAG_CMD_DIR_NONE: no DMA involved, 301 * * PVSCSI_FLAG_CMD_DIR_TOHOST: transfer from device to main memory, 302 * * PVSCSI_FLAG_CMD_DIR_TODEVICE: transfer from main memory to device, 303 * * PVSCSI_FLAG_CMD_OUT_OF_BAND_CDB: reserved to handle CDBs larger than 304 * 16bytes. To be specified. 305 * - vcpuHint: vcpuId of the processor that will be most likely waiting for the 306 * completion of the i/o. For guest OSes that use lowest priority message 307 * delivery mode (such as windows), we use this "hint" to deliver the 308 * completion action to the proper vcpu. For now, we can use the vcpuId of 309 * the processor that initiated the i/o as a likely candidate for the vcpu 310 * that will be waiting for the completion.. 311 * - bus should be 0: we currently only support bus 0 for now. 312 * - unused should be zero'd. 313 */ 314 315 #define PVSCSI_FLAG_CMD_WITH_SG_LIST (1 << 0) 316 #define PVSCSI_FLAG_CMD_OUT_OF_BAND_CDB (1 << 1) 317 #define PVSCSI_FLAG_CMD_DIR_NONE (1 << 2) 318 #define PVSCSI_FLAG_CMD_DIR_TOHOST (1 << 3) 319 #define PVSCSI_FLAG_CMD_DIR_TODEVICE (1 << 4) 320 321 struct PVSCSIRingReqDesc { 322 u64 context; 323 u64 dataAddr; 324 u64 dataLen; 325 u64 senseAddr; 326 u32 senseLen; 327 u32 flags; 328 u8 cdb[16]; 329 u8 cdbLen; 330 u8 lun[8]; 331 u8 tag; 332 u8 bus; 333 u8 target; 334 u8 vcpuHint; 335 u8 unused[59]; 336 } __packed; 337 338 /* 339 * Scatter-gather list management. 340 * 341 * As described above, when PVSCSI_FLAG_CMD_WITH_SG_LIST is set in the 342 * RingReqDesc.flags, then RingReqDesc.dataAddr is the PA of the first s/g 343 * table segment. 344 * 345 * - each segment of the s/g table contain a succession of struct 346 * PVSCSISGElement. 347 * - each segment is entirely contained on a single physical page of memory. 348 * - a "chain" s/g element has the flag PVSCSI_SGE_FLAG_CHAIN_ELEMENT set in 349 * PVSCSISGElement.flags and in this case: 350 * * addr is the PA of the next s/g segment, 351 * * length is undefined, assumed to be 0. 352 */ 353 354 struct PVSCSISGElement { 355 u64 addr; 356 u32 length; 357 u32 flags; 358 } __packed; 359 360 /* 361 * Completion descriptor. 362 * 363 * sizeof(RingCmpDesc) = 32 364 * 365 * - context: identifier of the command. The same thing that was specified 366 * under "context" as part of struct RingReqDesc at initiation time, 367 * - dataLen: number of bytes transferred for the actual i/o operation, 368 * - senseLen: number of bytes written into the sense buffer, 369 * - hostStatus: adapter status, 370 * - scsiStatus: device status, 371 * - _pad should be zero. 372 */ 373 374 struct PVSCSIRingCmpDesc { 375 u64 context; 376 u64 dataLen; 377 u32 senseLen; 378 u16 hostStatus; 379 u16 scsiStatus; 380 u32 _pad[2]; 381 } __packed; 382 383 struct PVSCSIConfigPageHeader { 384 u32 pageNum; 385 u16 numDwords; 386 u16 hostStatus; 387 u16 scsiStatus; 388 u16 reserved[3]; 389 } __packed; 390 391 struct PVSCSIConfigPageController { 392 struct PVSCSIConfigPageHeader header; 393 u64 nodeWWN; /* Device name as defined in the SAS spec. */ 394 u16 manufacturer[64]; 395 u16 serialNumber[64]; 396 u16 opromVersion[32]; 397 u16 hwVersion[32]; 398 u16 firmwareVersion[32]; 399 u32 numPhys; 400 u8 useConsecutivePhyWWNs; 401 u8 reserved[3]; 402 } __packed; 403 404 /* 405 * Interrupt status / IRQ bits. 406 */ 407 408 #define PVSCSI_INTR_CMPL_0 (1 << 0) 409 #define PVSCSI_INTR_CMPL_1 (1 << 1) 410 #define PVSCSI_INTR_CMPL_MASK MASK(2) 411 412 #define PVSCSI_INTR_MSG_0 (1 << 2) 413 #define PVSCSI_INTR_MSG_1 (1 << 3) 414 #define PVSCSI_INTR_MSG_MASK (MASK(2) << 2) 415 416 #define PVSCSI_INTR_ALL_SUPPORTED MASK(4) 417 418 /* 419 * Number of MSI-X vectors supported. 420 */ 421 #define PVSCSI_MAX_INTRS 24 422 423 /* 424 * Misc constants for the rings. 425 */ 426 427 #define PVSCSI_MAX_NUM_PAGES_REQ_RING PVSCSI_SETUP_RINGS_MAX_NUM_PAGES 428 #define PVSCSI_MAX_NUM_PAGES_CMP_RING PVSCSI_SETUP_RINGS_MAX_NUM_PAGES 429 #define PVSCSI_MAX_NUM_PAGES_MSG_RING PVSCSI_SETUP_MSG_RING_MAX_NUM_PAGES 430 431 #define PVSCSI_MAX_NUM_REQ_ENTRIES_PER_PAGE \ 432 (PAGE_SIZE / sizeof(struct PVSCSIRingReqDesc)) 433 434 #define PVSCSI_MAX_REQ_QUEUE_DEPTH \ 435 (PVSCSI_MAX_NUM_PAGES_REQ_RING * PVSCSI_MAX_NUM_REQ_ENTRIES_PER_PAGE) 436 437 #define PVSCSI_MEM_SPACE_COMMAND_NUM_PAGES 1 438 #define PVSCSI_MEM_SPACE_INTR_STATUS_NUM_PAGES 1 439 #define PVSCSI_MEM_SPACE_MISC_NUM_PAGES 2 440 #define PVSCSI_MEM_SPACE_KICK_IO_NUM_PAGES 2 441 #define PVSCSI_MEM_SPACE_MSIX_NUM_PAGES 2 442 443 enum PVSCSIMemSpace { 444 PVSCSI_MEM_SPACE_COMMAND_PAGE = 0, 445 PVSCSI_MEM_SPACE_INTR_STATUS_PAGE = 1, 446 PVSCSI_MEM_SPACE_MISC_PAGE = 2, 447 PVSCSI_MEM_SPACE_KICK_IO_PAGE = 4, 448 PVSCSI_MEM_SPACE_MSIX_TABLE_PAGE = 6, 449 PVSCSI_MEM_SPACE_MSIX_PBA_PAGE = 7, 450 }; 451 452 #define PVSCSI_MEM_SPACE_NUM_PAGES \ 453 (PVSCSI_MEM_SPACE_COMMAND_NUM_PAGES + \ 454 PVSCSI_MEM_SPACE_INTR_STATUS_NUM_PAGES + \ 455 PVSCSI_MEM_SPACE_MISC_NUM_PAGES + \ 456 PVSCSI_MEM_SPACE_KICK_IO_NUM_PAGES + \ 457 PVSCSI_MEM_SPACE_MSIX_NUM_PAGES) 458 459 #define PVSCSI_MEM_SPACE_SIZE (PVSCSI_MEM_SPACE_NUM_PAGES * PAGE_SIZE) 460 461 #endif /* _VMW_PVSCSI_H_ */ 462