1 /* 2 * VMware PVSCSI header file 3 * 4 * Copyright (C) 2008-2014, VMware, Inc. All Rights Reserved. 5 * 6 * This program is free software; you can redistribute it and/or modify it 7 * under the terms of the GNU General Public License as published by the 8 * Free Software Foundation; version 2 of the License and no later version. 9 * 10 * This program is distributed in the hope that it will be useful, but 11 * WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or 13 * NON INFRINGEMENT. See the GNU General Public License for more 14 * details. 15 * 16 * You should have received a copy of the GNU General Public License 17 * along with this program; if not, write to the Free Software 18 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. 19 * 20 * Maintained by: Arvind Kumar <arvindkumar@vmware.com> 21 * 22 */ 23 24 #ifndef _VMW_PVSCSI_H_ 25 #define _VMW_PVSCSI_H_ 26 27 #include <linux/types.h> 28 29 #define PVSCSI_DRIVER_VERSION_STRING "1.0.5.0-k" 30 31 #define PVSCSI_MAX_NUM_SG_ENTRIES_PER_SEGMENT 128 32 33 #define MASK(n) ((1 << (n)) - 1) /* make an n-bit mask */ 34 35 #define PCI_DEVICE_ID_VMWARE_PVSCSI 0x07C0 36 37 /* 38 * host adapter status/error codes 39 */ 40 enum HostBusAdapterStatus { 41 BTSTAT_SUCCESS = 0x00, /* CCB complete normally with no errors */ 42 BTSTAT_LINKED_COMMAND_COMPLETED = 0x0a, 43 BTSTAT_LINKED_COMMAND_COMPLETED_WITH_FLAG = 0x0b, 44 BTSTAT_DATA_UNDERRUN = 0x0c, 45 BTSTAT_SELTIMEO = 0x11, /* SCSI selection timeout */ 46 BTSTAT_DATARUN = 0x12, /* data overrun/underrun */ 47 BTSTAT_BUSFREE = 0x13, /* unexpected bus free */ 48 BTSTAT_INVPHASE = 0x14, /* invalid bus phase or sequence 49 * requested by target */ 50 BTSTAT_LUNMISMATCH = 0x17, /* linked CCB has different LUN from 51 * first CCB */ 52 BTSTAT_INVPARAM = 0x1a, /* invalid parameter in CCB or segment 53 * list */ 54 BTSTAT_SENSFAILED = 0x1b, /* auto request sense failed */ 55 BTSTAT_TAGREJECT = 0x1c, /* SCSI II tagged queueing message 56 * rejected by target */ 57 BTSTAT_BADMSG = 0x1d, /* unsupported message received by the 58 * host adapter */ 59 BTSTAT_HAHARDWARE = 0x20, /* host adapter hardware failed */ 60 BTSTAT_NORESPONSE = 0x21, /* target did not respond to SCSI ATN, 61 * sent a SCSI RST */ 62 BTSTAT_SENTRST = 0x22, /* host adapter asserted a SCSI RST */ 63 BTSTAT_RECVRST = 0x23, /* other SCSI devices asserted a SCSI 64 * RST */ 65 BTSTAT_DISCONNECT = 0x24, /* target device reconnected improperly 66 * (w/o tag) */ 67 BTSTAT_BUSRESET = 0x25, /* host adapter issued BUS device reset */ 68 BTSTAT_ABORTQUEUE = 0x26, /* abort queue generated */ 69 BTSTAT_HASOFTWARE = 0x27, /* host adapter software error */ 70 BTSTAT_HATIMEOUT = 0x30, /* host adapter hardware timeout error */ 71 BTSTAT_SCSIPARITY = 0x34, /* SCSI parity error detected */ 72 }; 73 74 /* 75 * SCSI device status values. 76 */ 77 enum ScsiDeviceStatus { 78 SDSTAT_GOOD = 0x00, /* No errors. */ 79 SDSTAT_CHECK = 0x02, /* Check condition. */ 80 }; 81 82 /* 83 * Register offsets. 84 * 85 * These registers are accessible both via i/o space and mm i/o. 86 */ 87 88 enum PVSCSIRegOffset { 89 PVSCSI_REG_OFFSET_COMMAND = 0x0, 90 PVSCSI_REG_OFFSET_COMMAND_DATA = 0x4, 91 PVSCSI_REG_OFFSET_COMMAND_STATUS = 0x8, 92 PVSCSI_REG_OFFSET_LAST_STS_0 = 0x100, 93 PVSCSI_REG_OFFSET_LAST_STS_1 = 0x104, 94 PVSCSI_REG_OFFSET_LAST_STS_2 = 0x108, 95 PVSCSI_REG_OFFSET_LAST_STS_3 = 0x10c, 96 PVSCSI_REG_OFFSET_INTR_STATUS = 0x100c, 97 PVSCSI_REG_OFFSET_INTR_MASK = 0x2010, 98 PVSCSI_REG_OFFSET_KICK_NON_RW_IO = 0x3014, 99 PVSCSI_REG_OFFSET_DEBUG = 0x3018, 100 PVSCSI_REG_OFFSET_KICK_RW_IO = 0x4018, 101 }; 102 103 /* 104 * Virtual h/w commands. 105 */ 106 107 enum PVSCSICommands { 108 PVSCSI_CMD_FIRST = 0, /* has to be first */ 109 110 PVSCSI_CMD_ADAPTER_RESET = 1, 111 PVSCSI_CMD_ISSUE_SCSI = 2, 112 PVSCSI_CMD_SETUP_RINGS = 3, 113 PVSCSI_CMD_RESET_BUS = 4, 114 PVSCSI_CMD_RESET_DEVICE = 5, 115 PVSCSI_CMD_ABORT_CMD = 6, 116 PVSCSI_CMD_CONFIG = 7, 117 PVSCSI_CMD_SETUP_MSG_RING = 8, 118 PVSCSI_CMD_DEVICE_UNPLUG = 9, 119 PVSCSI_CMD_SETUP_REQCALLTHRESHOLD = 10, 120 121 PVSCSI_CMD_LAST = 11 /* has to be last */ 122 }; 123 124 /* 125 * Command descriptor for PVSCSI_CMD_RESET_DEVICE -- 126 */ 127 128 struct PVSCSICmdDescResetDevice { 129 u32 target; 130 u8 lun[8]; 131 } __packed; 132 133 /* 134 * Command descriptor for PVSCSI_CMD_CONFIG -- 135 */ 136 137 struct PVSCSICmdDescConfigCmd { 138 u64 cmpAddr; 139 u64 configPageAddress; 140 u32 configPageNum; 141 u32 _pad; 142 } __packed; 143 144 /* 145 * Command descriptor for PVSCSI_CMD_SETUP_REQCALLTHRESHOLD -- 146 */ 147 148 struct PVSCSICmdDescSetupReqCall { 149 u32 enable; 150 } __packed; 151 152 enum PVSCSIConfigPageType { 153 PVSCSI_CONFIG_PAGE_CONTROLLER = 0x1958, 154 PVSCSI_CONFIG_PAGE_PHY = 0x1959, 155 PVSCSI_CONFIG_PAGE_DEVICE = 0x195a, 156 }; 157 158 enum PVSCSIConfigPageAddressType { 159 PVSCSI_CONFIG_CONTROLLER_ADDRESS = 0x2120, 160 PVSCSI_CONFIG_BUSTARGET_ADDRESS = 0x2121, 161 PVSCSI_CONFIG_PHY_ADDRESS = 0x2122, 162 }; 163 164 /* 165 * Command descriptor for PVSCSI_CMD_ABORT_CMD -- 166 * 167 * - currently does not support specifying the LUN. 168 * - _pad should be 0. 169 */ 170 171 struct PVSCSICmdDescAbortCmd { 172 u64 context; 173 u32 target; 174 u32 _pad; 175 } __packed; 176 177 /* 178 * Command descriptor for PVSCSI_CMD_SETUP_RINGS -- 179 * 180 * Notes: 181 * - reqRingNumPages and cmpRingNumPages need to be power of two. 182 * - reqRingNumPages and cmpRingNumPages need to be different from 0, 183 * - reqRingNumPages and cmpRingNumPages need to be inferior to 184 * PVSCSI_SETUP_RINGS_MAX_NUM_PAGES. 185 */ 186 187 #define PVSCSI_SETUP_RINGS_MAX_NUM_PAGES 32 188 struct PVSCSICmdDescSetupRings { 189 u32 reqRingNumPages; 190 u32 cmpRingNumPages; 191 u64 ringsStatePPN; 192 u64 reqRingPPNs[PVSCSI_SETUP_RINGS_MAX_NUM_PAGES]; 193 u64 cmpRingPPNs[PVSCSI_SETUP_RINGS_MAX_NUM_PAGES]; 194 } __packed; 195 196 /* 197 * Command descriptor for PVSCSI_CMD_SETUP_MSG_RING -- 198 * 199 * Notes: 200 * - this command was not supported in the initial revision of the h/w 201 * interface. Before using it, you need to check that it is supported by 202 * writing PVSCSI_CMD_SETUP_MSG_RING to the 'command' register, then 203 * immediately after read the 'command status' register: 204 * * a value of -1 means that the cmd is NOT supported, 205 * * a value != -1 means that the cmd IS supported. 206 * If it's supported the 'command status' register should return: 207 * sizeof(PVSCSICmdDescSetupMsgRing) / sizeof(u32). 208 * - this command should be issued _after_ the usual SETUP_RINGS so that the 209 * RingsState page is already setup. If not, the command is a nop. 210 * - numPages needs to be a power of two, 211 * - numPages needs to be different from 0, 212 * - _pad should be zero. 213 */ 214 215 #define PVSCSI_SETUP_MSG_RING_MAX_NUM_PAGES 16 216 217 struct PVSCSICmdDescSetupMsgRing { 218 u32 numPages; 219 u32 _pad; 220 u64 ringPPNs[PVSCSI_SETUP_MSG_RING_MAX_NUM_PAGES]; 221 } __packed; 222 223 enum PVSCSIMsgType { 224 PVSCSI_MSG_DEV_ADDED = 0, 225 PVSCSI_MSG_DEV_REMOVED = 1, 226 PVSCSI_MSG_LAST = 2, 227 }; 228 229 /* 230 * Msg descriptor. 231 * 232 * sizeof(struct PVSCSIRingMsgDesc) == 128. 233 * 234 * - type is of type enum PVSCSIMsgType. 235 * - the content of args depend on the type of event being delivered. 236 */ 237 238 struct PVSCSIRingMsgDesc { 239 u32 type; 240 u32 args[31]; 241 } __packed; 242 243 struct PVSCSIMsgDescDevStatusChanged { 244 u32 type; /* PVSCSI_MSG_DEV _ADDED / _REMOVED */ 245 u32 bus; 246 u32 target; 247 u8 lun[8]; 248 u32 pad[27]; 249 } __packed; 250 251 /* 252 * Rings state. 253 * 254 * - the fields: 255 * . msgProdIdx, 256 * . msgConsIdx, 257 * . msgNumEntriesLog2, 258 * .. are only used once the SETUP_MSG_RING cmd has been issued. 259 * - '_pad' helps to ensure that the msg related fields are on their own 260 * cache-line. 261 */ 262 263 struct PVSCSIRingsState { 264 u32 reqProdIdx; 265 u32 reqConsIdx; 266 u32 reqNumEntriesLog2; 267 268 u32 cmpProdIdx; 269 u32 cmpConsIdx; 270 u32 cmpNumEntriesLog2; 271 272 u32 reqCallThreshold; 273 274 u8 _pad[100]; 275 276 u32 msgProdIdx; 277 u32 msgConsIdx; 278 u32 msgNumEntriesLog2; 279 } __packed; 280 281 /* 282 * Request descriptor. 283 * 284 * sizeof(RingReqDesc) = 128 285 * 286 * - context: is a unique identifier of a command. It could normally be any 287 * 64bit value, however we currently store it in the serialNumber variable 288 * of struct SCSI_Command, so we have the following restrictions due to the 289 * way this field is handled in the vmkernel storage stack: 290 * * this value can't be 0, 291 * * the upper 32bit need to be 0 since serialNumber is as a u32. 292 * Currently tracked as PR 292060. 293 * - dataLen: contains the total number of bytes that need to be transferred. 294 * - dataAddr: 295 * * if PVSCSI_FLAG_CMD_WITH_SG_LIST is set: dataAddr is the PA of the first 296 * s/g table segment, each s/g segment is entirely contained on a single 297 * page of physical memory, 298 * * if PVSCSI_FLAG_CMD_WITH_SG_LIST is NOT set, then dataAddr is the PA of 299 * the buffer used for the DMA transfer, 300 * - flags: 301 * * PVSCSI_FLAG_CMD_WITH_SG_LIST: see dataAddr above, 302 * * PVSCSI_FLAG_CMD_DIR_NONE: no DMA involved, 303 * * PVSCSI_FLAG_CMD_DIR_TOHOST: transfer from device to main memory, 304 * * PVSCSI_FLAG_CMD_DIR_TODEVICE: transfer from main memory to device, 305 * * PVSCSI_FLAG_CMD_OUT_OF_BAND_CDB: reserved to handle CDBs larger than 306 * 16bytes. To be specified. 307 * - vcpuHint: vcpuId of the processor that will be most likely waiting for the 308 * completion of the i/o. For guest OSes that use lowest priority message 309 * delivery mode (such as windows), we use this "hint" to deliver the 310 * completion action to the proper vcpu. For now, we can use the vcpuId of 311 * the processor that initiated the i/o as a likely candidate for the vcpu 312 * that will be waiting for the completion.. 313 * - bus should be 0: we currently only support bus 0 for now. 314 * - unused should be zero'd. 315 */ 316 317 #define PVSCSI_FLAG_CMD_WITH_SG_LIST (1 << 0) 318 #define PVSCSI_FLAG_CMD_OUT_OF_BAND_CDB (1 << 1) 319 #define PVSCSI_FLAG_CMD_DIR_NONE (1 << 2) 320 #define PVSCSI_FLAG_CMD_DIR_TOHOST (1 << 3) 321 #define PVSCSI_FLAG_CMD_DIR_TODEVICE (1 << 4) 322 323 struct PVSCSIRingReqDesc { 324 u64 context; 325 u64 dataAddr; 326 u64 dataLen; 327 u64 senseAddr; 328 u32 senseLen; 329 u32 flags; 330 u8 cdb[16]; 331 u8 cdbLen; 332 u8 lun[8]; 333 u8 tag; 334 u8 bus; 335 u8 target; 336 u8 vcpuHint; 337 u8 unused[59]; 338 } __packed; 339 340 /* 341 * Scatter-gather list management. 342 * 343 * As described above, when PVSCSI_FLAG_CMD_WITH_SG_LIST is set in the 344 * RingReqDesc.flags, then RingReqDesc.dataAddr is the PA of the first s/g 345 * table segment. 346 * 347 * - each segment of the s/g table contain a succession of struct 348 * PVSCSISGElement. 349 * - each segment is entirely contained on a single physical page of memory. 350 * - a "chain" s/g element has the flag PVSCSI_SGE_FLAG_CHAIN_ELEMENT set in 351 * PVSCSISGElement.flags and in this case: 352 * * addr is the PA of the next s/g segment, 353 * * length is undefined, assumed to be 0. 354 */ 355 356 struct PVSCSISGElement { 357 u64 addr; 358 u32 length; 359 u32 flags; 360 } __packed; 361 362 /* 363 * Completion descriptor. 364 * 365 * sizeof(RingCmpDesc) = 32 366 * 367 * - context: identifier of the command. The same thing that was specified 368 * under "context" as part of struct RingReqDesc at initiation time, 369 * - dataLen: number of bytes transferred for the actual i/o operation, 370 * - senseLen: number of bytes written into the sense buffer, 371 * - hostStatus: adapter status, 372 * - scsiStatus: device status, 373 * - _pad should be zero. 374 */ 375 376 struct PVSCSIRingCmpDesc { 377 u64 context; 378 u64 dataLen; 379 u32 senseLen; 380 u16 hostStatus; 381 u16 scsiStatus; 382 u32 _pad[2]; 383 } __packed; 384 385 struct PVSCSIConfigPageHeader { 386 u32 pageNum; 387 u16 numDwords; 388 u16 hostStatus; 389 u16 scsiStatus; 390 u16 reserved[3]; 391 } __packed; 392 393 struct PVSCSIConfigPageController { 394 struct PVSCSIConfigPageHeader header; 395 u64 nodeWWN; /* Device name as defined in the SAS spec. */ 396 u16 manufacturer[64]; 397 u16 serialNumber[64]; 398 u16 opromVersion[32]; 399 u16 hwVersion[32]; 400 u16 firmwareVersion[32]; 401 u32 numPhys; 402 u8 useConsecutivePhyWWNs; 403 u8 reserved[3]; 404 } __packed; 405 406 /* 407 * Interrupt status / IRQ bits. 408 */ 409 410 #define PVSCSI_INTR_CMPL_0 (1 << 0) 411 #define PVSCSI_INTR_CMPL_1 (1 << 1) 412 #define PVSCSI_INTR_CMPL_MASK MASK(2) 413 414 #define PVSCSI_INTR_MSG_0 (1 << 2) 415 #define PVSCSI_INTR_MSG_1 (1 << 3) 416 #define PVSCSI_INTR_MSG_MASK (MASK(2) << 2) 417 418 #define PVSCSI_INTR_ALL_SUPPORTED MASK(4) 419 420 /* 421 * Number of MSI-X vectors supported. 422 */ 423 #define PVSCSI_MAX_INTRS 24 424 425 /* 426 * Enumeration of supported MSI-X vectors 427 */ 428 #define PVSCSI_VECTOR_COMPLETION 0 429 430 /* 431 * Misc constants for the rings. 432 */ 433 434 #define PVSCSI_MAX_NUM_PAGES_REQ_RING PVSCSI_SETUP_RINGS_MAX_NUM_PAGES 435 #define PVSCSI_MAX_NUM_PAGES_CMP_RING PVSCSI_SETUP_RINGS_MAX_NUM_PAGES 436 #define PVSCSI_MAX_NUM_PAGES_MSG_RING PVSCSI_SETUP_MSG_RING_MAX_NUM_PAGES 437 438 #define PVSCSI_MAX_NUM_REQ_ENTRIES_PER_PAGE \ 439 (PAGE_SIZE / sizeof(struct PVSCSIRingReqDesc)) 440 441 #define PVSCSI_MAX_REQ_QUEUE_DEPTH \ 442 (PVSCSI_MAX_NUM_PAGES_REQ_RING * PVSCSI_MAX_NUM_REQ_ENTRIES_PER_PAGE) 443 444 #define PVSCSI_MEM_SPACE_COMMAND_NUM_PAGES 1 445 #define PVSCSI_MEM_SPACE_INTR_STATUS_NUM_PAGES 1 446 #define PVSCSI_MEM_SPACE_MISC_NUM_PAGES 2 447 #define PVSCSI_MEM_SPACE_KICK_IO_NUM_PAGES 2 448 #define PVSCSI_MEM_SPACE_MSIX_NUM_PAGES 2 449 450 enum PVSCSIMemSpace { 451 PVSCSI_MEM_SPACE_COMMAND_PAGE = 0, 452 PVSCSI_MEM_SPACE_INTR_STATUS_PAGE = 1, 453 PVSCSI_MEM_SPACE_MISC_PAGE = 2, 454 PVSCSI_MEM_SPACE_KICK_IO_PAGE = 4, 455 PVSCSI_MEM_SPACE_MSIX_TABLE_PAGE = 6, 456 PVSCSI_MEM_SPACE_MSIX_PBA_PAGE = 7, 457 }; 458 459 #define PVSCSI_MEM_SPACE_NUM_PAGES \ 460 (PVSCSI_MEM_SPACE_COMMAND_NUM_PAGES + \ 461 PVSCSI_MEM_SPACE_INTR_STATUS_NUM_PAGES + \ 462 PVSCSI_MEM_SPACE_MISC_NUM_PAGES + \ 463 PVSCSI_MEM_SPACE_KICK_IO_NUM_PAGES + \ 464 PVSCSI_MEM_SPACE_MSIX_NUM_PAGES) 465 466 #define PVSCSI_MEM_SPACE_SIZE (PVSCSI_MEM_SPACE_NUM_PAGES * PAGE_SIZE) 467 468 #endif /* _VMW_PVSCSI_H_ */ 469