1 /* 2 * Device driver for the SYMBIOS/LSILOGIC 53C8XX and 53C1010 family 3 * of PCI-SCSI IO processors. 4 * 5 * Copyright (C) 1999-2001 Gerard Roudier <groudier@free.fr> 6 * 7 * This driver is derived from the Linux sym53c8xx driver. 8 * Copyright (C) 1998-2000 Gerard Roudier 9 * 10 * The sym53c8xx driver is derived from the ncr53c8xx driver that had been 11 * a port of the FreeBSD ncr driver to Linux-1.2.13. 12 * 13 * The original ncr driver has been written for 386bsd and FreeBSD by 14 * Wolfgang Stanglmeier <wolf@cologne.de> 15 * Stefan Esser <se@mi.Uni-Koeln.de> 16 * Copyright (C) 1994 Wolfgang Stanglmeier 17 * 18 * Other major contributions: 19 * 20 * NVRAM detection and reading. 21 * Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk> 22 * 23 *----------------------------------------------------------------------------- 24 * 25 * This program is free software; you can redistribute it and/or modify 26 * it under the terms of the GNU General Public License as published by 27 * the Free Software Foundation; either version 2 of the License, or 28 * (at your option) any later version. 29 * 30 * This program is distributed in the hope that it will be useful, 31 * but WITHOUT ANY WARRANTY; without even the implied warranty of 32 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 33 * GNU General Public License for more details. 34 * 35 * You should have received a copy of the GNU General Public License 36 * along with this program; if not, write to the Free Software 37 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 38 */ 39 40 #ifndef SYM_DEFS_H 41 #define SYM_DEFS_H 42 43 #define SYM_VERSION "2.2.0" 44 #define SYM_DRIVER_NAME "sym-" SYM_VERSION 45 46 /* 47 * SYM53C8XX device features descriptor. 48 */ 49 struct sym_chip { 50 u_short device_id; 51 u_short revision_id; 52 char *name; 53 u_char burst_max; /* log-base-2 of max burst */ 54 u_char offset_max; 55 u_char nr_divisor; 56 u_char lp_probe_bit; 57 u_int features; 58 #define FE_LED0 (1<<0) 59 #define FE_WIDE (1<<1) /* Wide data transfers */ 60 #define FE_ULTRA (1<<2) /* Ultra speed 20Mtrans/sec */ 61 #define FE_ULTRA2 (1<<3) /* Ultra 2 - 40 Mtrans/sec */ 62 #define FE_DBLR (1<<4) /* Clock doubler present */ 63 #define FE_QUAD (1<<5) /* Clock quadrupler present */ 64 #define FE_ERL (1<<6) /* Enable read line */ 65 #define FE_CLSE (1<<7) /* Cache line size enable */ 66 #define FE_WRIE (1<<8) /* Write & Invalidate enable */ 67 #define FE_ERMP (1<<9) /* Enable read multiple */ 68 #define FE_BOF (1<<10) /* Burst opcode fetch */ 69 #define FE_DFS (1<<11) /* DMA fifo size */ 70 #define FE_PFEN (1<<12) /* Prefetch enable */ 71 #define FE_LDSTR (1<<13) /* Load/Store supported */ 72 #define FE_RAM (1<<14) /* On chip RAM present */ 73 #define FE_VARCLK (1<<15) /* Clock frequency may vary */ 74 #define FE_RAM8K (1<<16) /* On chip RAM sized 8Kb */ 75 #define FE_64BIT (1<<17) /* 64-bit PCI BUS interface */ 76 #define FE_IO256 (1<<18) /* Requires full 256 bytes in PCI space */ 77 #define FE_NOPM (1<<19) /* Scripts handles phase mismatch */ 78 #define FE_LEDC (1<<20) /* Hardware control of LED */ 79 #define FE_ULTRA3 (1<<21) /* Ultra 3 - 80 Mtrans/sec DT */ 80 #define FE_66MHZ (1<<22) /* 66MHz PCI support */ 81 #define FE_CRC (1<<23) /* CRC support */ 82 #define FE_DIFF (1<<24) /* SCSI HVD support */ 83 #define FE_DFBC (1<<25) /* Have DFBC register */ 84 #define FE_LCKFRQ (1<<26) /* Have LCKFRQ */ 85 #define FE_C10 (1<<27) /* Various C10 core (mis)features */ 86 #define FE_U3EN (1<<28) /* U3EN bit usable */ 87 #define FE_DAC (1<<29) /* Support PCI DAC (64 bit addressing) */ 88 #define FE_ISTAT1 (1<<30) /* Have ISTAT1, MBOX0, MBOX1 registers */ 89 90 #define FE_CACHE_SET (FE_ERL|FE_CLSE|FE_WRIE|FE_ERMP) 91 #define FE_CACHE0_SET (FE_CACHE_SET & ~FE_ERL) 92 }; 93 94 /* 95 * SYM53C8XX IO register data structure. 96 */ 97 struct sym_reg { 98 /*00*/ u8 nc_scntl0; /* full arb., ena parity, par->ATN */ 99 100 /*01*/ u8 nc_scntl1; /* no reset */ 101 #define ISCON 0x10 /* connected to scsi */ 102 #define CRST 0x08 /* force reset */ 103 #define IARB 0x02 /* immediate arbitration */ 104 105 /*02*/ u8 nc_scntl2; /* no disconnect expected */ 106 #define SDU 0x80 /* cmd: disconnect will raise error */ 107 #define CHM 0x40 /* sta: chained mode */ 108 #define WSS 0x08 /* sta: wide scsi send [W]*/ 109 #define WSR 0x01 /* sta: wide scsi received [W]*/ 110 111 /*03*/ u8 nc_scntl3; /* cnf system clock dependent */ 112 #define EWS 0x08 /* cmd: enable wide scsi [W]*/ 113 #define ULTRA 0x80 /* cmd: ULTRA enable */ 114 /* bits 0-2, 7 rsvd for C1010 */ 115 116 /*04*/ u8 nc_scid; /* cnf host adapter scsi address */ 117 #define RRE 0x40 /* r/w:e enable response to resel. */ 118 #define SRE 0x20 /* r/w:e enable response to select */ 119 120 /*05*/ u8 nc_sxfer; /* ### Sync speed and count */ 121 /* bits 6-7 rsvd for C1010 */ 122 123 /*06*/ u8 nc_sdid; /* ### Destination-ID */ 124 125 /*07*/ u8 nc_gpreg; /* ??? IO-Pins */ 126 127 /*08*/ u8 nc_sfbr; /* ### First byte received */ 128 129 /*09*/ u8 nc_socl; 130 #define CREQ 0x80 /* r/w: SCSI-REQ */ 131 #define CACK 0x40 /* r/w: SCSI-ACK */ 132 #define CBSY 0x20 /* r/w: SCSI-BSY */ 133 #define CSEL 0x10 /* r/w: SCSI-SEL */ 134 #define CATN 0x08 /* r/w: SCSI-ATN */ 135 #define CMSG 0x04 /* r/w: SCSI-MSG */ 136 #define CC_D 0x02 /* r/w: SCSI-C_D */ 137 #define CI_O 0x01 /* r/w: SCSI-I_O */ 138 139 /*0a*/ u8 nc_ssid; 140 141 /*0b*/ u8 nc_sbcl; 142 143 /*0c*/ u8 nc_dstat; 144 #define DFE 0x80 /* sta: dma fifo empty */ 145 #define MDPE 0x40 /* int: master data parity error */ 146 #define BF 0x20 /* int: script: bus fault */ 147 #define ABRT 0x10 /* int: script: command aborted */ 148 #define SSI 0x08 /* int: script: single step */ 149 #define SIR 0x04 /* int: script: interrupt instruct. */ 150 #define IID 0x01 /* int: script: illegal instruct. */ 151 152 /*0d*/ u8 nc_sstat0; 153 #define ILF 0x80 /* sta: data in SIDL register lsb */ 154 #define ORF 0x40 /* sta: data in SODR register lsb */ 155 #define OLF 0x20 /* sta: data in SODL register lsb */ 156 #define AIP 0x10 /* sta: arbitration in progress */ 157 #define LOA 0x08 /* sta: arbitration lost */ 158 #define WOA 0x04 /* sta: arbitration won */ 159 #define IRST 0x02 /* sta: scsi reset signal */ 160 #define SDP 0x01 /* sta: scsi parity signal */ 161 162 /*0e*/ u8 nc_sstat1; 163 #define FF3210 0xf0 /* sta: bytes in the scsi fifo */ 164 165 /*0f*/ u8 nc_sstat2; 166 #define ILF1 0x80 /* sta: data in SIDL register msb[W]*/ 167 #define ORF1 0x40 /* sta: data in SODR register msb[W]*/ 168 #define OLF1 0x20 /* sta: data in SODL register msb[W]*/ 169 #define DM 0x04 /* sta: DIFFSENS mismatch (895/6 only) */ 170 #define LDSC 0x02 /* sta: disconnect & reconnect */ 171 172 /*10*/ u8 nc_dsa; /* --> Base page */ 173 /*11*/ u8 nc_dsa1; 174 /*12*/ u8 nc_dsa2; 175 /*13*/ u8 nc_dsa3; 176 177 /*14*/ u8 nc_istat; /* --> Main Command and status */ 178 #define CABRT 0x80 /* cmd: abort current operation */ 179 #define SRST 0x40 /* mod: reset chip */ 180 #define SIGP 0x20 /* r/w: message from host to script */ 181 #define SEM 0x10 /* r/w: message between host + script */ 182 #define CON 0x08 /* sta: connected to scsi */ 183 #define INTF 0x04 /* sta: int on the fly (reset by wr)*/ 184 #define SIP 0x02 /* sta: scsi-interrupt */ 185 #define DIP 0x01 /* sta: host/script interrupt */ 186 187 /*15*/ u8 nc_istat1; /* 896 only */ 188 #define FLSH 0x04 /* sta: chip is flushing */ 189 #define SCRUN 0x02 /* sta: scripts are running */ 190 #define SIRQD 0x01 /* r/w: disable INT pin */ 191 192 /*16*/ u8 nc_mbox0; /* 896 only */ 193 /*17*/ u8 nc_mbox1; /* 896 only */ 194 195 /*18*/ u8 nc_ctest0; 196 /*19*/ u8 nc_ctest1; 197 198 /*1a*/ u8 nc_ctest2; 199 #define CSIGP 0x40 200 /* bits 0-2,7 rsvd for C1010 */ 201 202 /*1b*/ u8 nc_ctest3; 203 #define FLF 0x08 /* cmd: flush dma fifo */ 204 #define CLF 0x04 /* cmd: clear dma fifo */ 205 #define FM 0x02 /* mod: fetch pin mode */ 206 #define WRIE 0x01 /* mod: write and invalidate enable */ 207 /* bits 4-7 rsvd for C1010 */ 208 209 /*1c*/ u32 nc_temp; /* ### Temporary stack */ 210 211 /*20*/ u8 nc_dfifo; 212 /*21*/ u8 nc_ctest4; 213 #define BDIS 0x80 /* mod: burst disable */ 214 #define MPEE 0x08 /* mod: master parity error enable */ 215 216 /*22*/ u8 nc_ctest5; 217 #define DFS 0x20 /* mod: dma fifo size */ 218 /* bits 0-1, 3-7 rsvd for C1010 */ 219 220 /*23*/ u8 nc_ctest6; 221 222 /*24*/ u32 nc_dbc; /* ### Byte count and command */ 223 /*28*/ u32 nc_dnad; /* ### Next command register */ 224 /*2c*/ u32 nc_dsp; /* --> Script Pointer */ 225 /*30*/ u32 nc_dsps; /* --> Script pointer save/opcode#2 */ 226 227 /*34*/ u8 nc_scratcha; /* Temporary register a */ 228 /*35*/ u8 nc_scratcha1; 229 /*36*/ u8 nc_scratcha2; 230 /*37*/ u8 nc_scratcha3; 231 232 /*38*/ u8 nc_dmode; 233 #define BL_2 0x80 /* mod: burst length shift value +2 */ 234 #define BL_1 0x40 /* mod: burst length shift value +1 */ 235 #define ERL 0x08 /* mod: enable read line */ 236 #define ERMP 0x04 /* mod: enable read multiple */ 237 #define BOF 0x02 /* mod: burst op code fetch */ 238 239 /*39*/ u8 nc_dien; 240 /*3a*/ u8 nc_sbr; 241 242 /*3b*/ u8 nc_dcntl; /* --> Script execution control */ 243 #define CLSE 0x80 /* mod: cache line size enable */ 244 #define PFF 0x40 /* cmd: pre-fetch flush */ 245 #define PFEN 0x20 /* mod: pre-fetch enable */ 246 #define SSM 0x10 /* mod: single step mode */ 247 #define IRQM 0x08 /* mod: irq mode (1 = totem pole !) */ 248 #define STD 0x04 /* cmd: start dma mode */ 249 #define IRQD 0x02 /* mod: irq disable */ 250 #define NOCOM 0x01 /* cmd: protect sfbr while reselect */ 251 /* bits 0-1 rsvd for C1010 */ 252 253 /*3c*/ u32 nc_adder; 254 255 /*40*/ u16 nc_sien; /* -->: interrupt enable */ 256 /*42*/ u16 nc_sist; /* <--: interrupt status */ 257 #define SBMC 0x1000/* sta: SCSI Bus Mode Change (895/6 only) */ 258 #define STO 0x0400/* sta: timeout (select) */ 259 #define GEN 0x0200/* sta: timeout (general) */ 260 #define HTH 0x0100/* sta: timeout (handshake) */ 261 #define MA 0x80 /* sta: phase mismatch */ 262 #define CMP 0x40 /* sta: arbitration complete */ 263 #define SEL 0x20 /* sta: selected by another device */ 264 #define RSL 0x10 /* sta: reselected by another device*/ 265 #define SGE 0x08 /* sta: gross error (over/underflow)*/ 266 #define UDC 0x04 /* sta: unexpected disconnect */ 267 #define RST 0x02 /* sta: scsi bus reset detected */ 268 #define PAR 0x01 /* sta: scsi parity error */ 269 270 /*44*/ u8 nc_slpar; 271 /*45*/ u8 nc_swide; 272 /*46*/ u8 nc_macntl; 273 /*47*/ u8 nc_gpcntl; 274 /*48*/ u8 nc_stime0; /* cmd: timeout for select&handshake*/ 275 /*49*/ u8 nc_stime1; /* cmd: timeout user defined */ 276 /*4a*/ u16 nc_respid; /* sta: Reselect-IDs */ 277 278 /*4c*/ u8 nc_stest0; 279 280 /*4d*/ u8 nc_stest1; 281 #define SCLK 0x80 /* Use the PCI clock as SCSI clock */ 282 #define DBLEN 0x08 /* clock doubler running */ 283 #define DBLSEL 0x04 /* clock doubler selected */ 284 285 286 /*4e*/ u8 nc_stest2; 287 #define ROF 0x40 /* reset scsi offset (after gross error!) */ 288 #define EXT 0x02 /* extended filtering */ 289 290 /*4f*/ u8 nc_stest3; 291 #define TE 0x80 /* c: tolerAnt enable */ 292 #define HSC 0x20 /* c: Halt SCSI Clock */ 293 #define CSF 0x02 /* c: clear scsi fifo */ 294 295 /*50*/ u16 nc_sidl; /* Lowlevel: latched from scsi data */ 296 /*52*/ u8 nc_stest4; 297 #define SMODE 0xc0 /* SCSI bus mode (895/6 only) */ 298 #define SMODE_HVD 0x40 /* High Voltage Differential */ 299 #define SMODE_SE 0x80 /* Single Ended */ 300 #define SMODE_LVD 0xc0 /* Low Voltage Differential */ 301 #define LCKFRQ 0x20 /* Frequency Lock (895/6 only) */ 302 /* bits 0-5 rsvd for C1010 */ 303 304 /*53*/ u8 nc_53_; 305 /*54*/ u16 nc_sodl; /* Lowlevel: data out to scsi data */ 306 /*56*/ u8 nc_ccntl0; /* Chip Control 0 (896) */ 307 #define ENPMJ 0x80 /* Enable Phase Mismatch Jump */ 308 #define PMJCTL 0x40 /* Phase Mismatch Jump Control */ 309 #define ENNDJ 0x20 /* Enable Non Data PM Jump */ 310 #define DISFC 0x10 /* Disable Auto FIFO Clear */ 311 #define DILS 0x02 /* Disable Internal Load/Store */ 312 #define DPR 0x01 /* Disable Pipe Req */ 313 314 /*57*/ u8 nc_ccntl1; /* Chip Control 1 (896) */ 315 #define ZMOD 0x80 /* High Impedance Mode */ 316 #define DDAC 0x08 /* Disable Dual Address Cycle */ 317 #define XTIMOD 0x04 /* 64-bit Table Ind. Indexing Mode */ 318 #define EXTIBMV 0x02 /* Enable 64-bit Table Ind. BMOV */ 319 #define EXDBMV 0x01 /* Enable 64-bit Direct BMOV */ 320 321 /*58*/ u16 nc_sbdl; /* Lowlevel: data from scsi data */ 322 /*5a*/ u16 nc_5a_; 323 324 /*5c*/ u8 nc_scr0; /* Working register B */ 325 /*5d*/ u8 nc_scr1; 326 /*5e*/ u8 nc_scr2; 327 /*5f*/ u8 nc_scr3; 328 329 /*60*/ u8 nc_scrx[64]; /* Working register C-R */ 330 /*a0*/ u32 nc_mmrs; /* Memory Move Read Selector */ 331 /*a4*/ u32 nc_mmws; /* Memory Move Write Selector */ 332 /*a8*/ u32 nc_sfs; /* Script Fetch Selector */ 333 /*ac*/ u32 nc_drs; /* DSA Relative Selector */ 334 /*b0*/ u32 nc_sbms; /* Static Block Move Selector */ 335 /*b4*/ u32 nc_dbms; /* Dynamic Block Move Selector */ 336 /*b8*/ u32 nc_dnad64; /* DMA Next Address 64 */ 337 /*bc*/ u16 nc_scntl4; /* C1010 only */ 338 #define U3EN 0x80 /* Enable Ultra 3 */ 339 #define AIPCKEN 0x40 /* AIP checking enable */ 340 /* Also enable AIP generation on C10-33*/ 341 #define XCLKH_DT 0x08 /* Extra clock of data hold on DT edge */ 342 #define XCLKH_ST 0x04 /* Extra clock of data hold on ST edge */ 343 #define XCLKS_DT 0x02 /* Extra clock of data set on DT edge */ 344 #define XCLKS_ST 0x01 /* Extra clock of data set on ST edge */ 345 /*be*/ u8 nc_aipcntl0; /* AIP Control 0 C1010 only */ 346 /*bf*/ u8 nc_aipcntl1; /* AIP Control 1 C1010 only */ 347 #define DISAIP 0x08 /* Disable AIP generation C10-66 only */ 348 /*c0*/ u32 nc_pmjad1; /* Phase Mismatch Jump Address 1 */ 349 /*c4*/ u32 nc_pmjad2; /* Phase Mismatch Jump Address 2 */ 350 /*c8*/ u8 nc_rbc; /* Remaining Byte Count */ 351 /*c9*/ u8 nc_rbc1; 352 /*ca*/ u8 nc_rbc2; 353 /*cb*/ u8 nc_rbc3; 354 355 /*cc*/ u8 nc_ua; /* Updated Address */ 356 /*cd*/ u8 nc_ua1; 357 /*ce*/ u8 nc_ua2; 358 /*cf*/ u8 nc_ua3; 359 /*d0*/ u32 nc_esa; /* Entry Storage Address */ 360 /*d4*/ u8 nc_ia; /* Instruction Address */ 361 /*d5*/ u8 nc_ia1; 362 /*d6*/ u8 nc_ia2; 363 /*d7*/ u8 nc_ia3; 364 /*d8*/ u32 nc_sbc; /* SCSI Byte Count (3 bytes only) */ 365 /*dc*/ u32 nc_csbc; /* Cumulative SCSI Byte Count */ 366 /* Following for C1010 only */ 367 /*e0*/ u16 nc_crcpad; /* CRC Value */ 368 /*e2*/ u8 nc_crccntl0; /* CRC control register */ 369 #define SNDCRC 0x10 /* Send CRC Request */ 370 /*e3*/ u8 nc_crccntl1; /* CRC control register */ 371 /*e4*/ u32 nc_crcdata; /* CRC data register */ 372 /*e8*/ u32 nc_e8_; 373 /*ec*/ u32 nc_ec_; 374 /*f0*/ u16 nc_dfbc; /* DMA FIFO byte count */ 375 }; 376 377 /*----------------------------------------------------------- 378 * 379 * Utility macros for the script. 380 * 381 *----------------------------------------------------------- 382 */ 383 384 #define REGJ(p,r) (offsetof(struct sym_reg, p ## r)) 385 #define REG(r) REGJ (nc_, r) 386 387 /*----------------------------------------------------------- 388 * 389 * SCSI phases 390 * 391 *----------------------------------------------------------- 392 */ 393 394 #define SCR_DATA_OUT 0x00000000 395 #define SCR_DATA_IN 0x01000000 396 #define SCR_COMMAND 0x02000000 397 #define SCR_STATUS 0x03000000 398 #define SCR_DT_DATA_OUT 0x04000000 399 #define SCR_DT_DATA_IN 0x05000000 400 #define SCR_MSG_OUT 0x06000000 401 #define SCR_MSG_IN 0x07000000 402 /* DT phases are illegal for non Ultra3 mode */ 403 #define SCR_ILG_OUT 0x04000000 404 #define SCR_ILG_IN 0x05000000 405 406 /*----------------------------------------------------------- 407 * 408 * Data transfer via SCSI. 409 * 410 *----------------------------------------------------------- 411 * 412 * MOVE_ABS (LEN) 413 * <<start address>> 414 * 415 * MOVE_IND (LEN) 416 * <<dnad_offset>> 417 * 418 * MOVE_TBL 419 * <<dnad_offset>> 420 * 421 *----------------------------------------------------------- 422 */ 423 424 #define OPC_MOVE 0x08000000 425 426 #define SCR_MOVE_ABS(l) ((0x00000000 | OPC_MOVE) | (l)) 427 /* #define SCR_MOVE_IND(l) ((0x20000000 | OPC_MOVE) | (l)) */ 428 #define SCR_MOVE_TBL (0x10000000 | OPC_MOVE) 429 430 #define SCR_CHMOV_ABS(l) ((0x00000000) | (l)) 431 /* #define SCR_CHMOV_IND(l) ((0x20000000) | (l)) */ 432 #define SCR_CHMOV_TBL (0x10000000) 433 434 #ifdef SYM_CONF_TARGET_ROLE_SUPPORT 435 /* We steal the `indirect addressing' flag for target mode MOVE in scripts */ 436 437 #define OPC_TCHMOVE 0x08000000 438 439 #define SCR_TCHMOVE_ABS(l) ((0x20000000 | OPC_TCHMOVE) | (l)) 440 #define SCR_TCHMOVE_TBL (0x30000000 | OPC_TCHMOVE) 441 442 #define SCR_TMOV_ABS(l) ((0x20000000) | (l)) 443 #define SCR_TMOV_TBL (0x30000000) 444 #endif 445 446 struct sym_tblmove { 447 u32 size; 448 u32 addr; 449 }; 450 451 /*----------------------------------------------------------- 452 * 453 * Selection 454 * 455 *----------------------------------------------------------- 456 * 457 * SEL_ABS | SCR_ID (0..15) [ | REL_JMP] 458 * <<alternate_address>> 459 * 460 * SEL_TBL | << dnad_offset>> [ | REL_JMP] 461 * <<alternate_address>> 462 * 463 *----------------------------------------------------------- 464 */ 465 466 #define SCR_SEL_ABS 0x40000000 467 #define SCR_SEL_ABS_ATN 0x41000000 468 #define SCR_SEL_TBL 0x42000000 469 #define SCR_SEL_TBL_ATN 0x43000000 470 471 #ifdef SYM_CONF_TARGET_ROLE_SUPPORT 472 #define SCR_RESEL_ABS 0x40000000 473 #define SCR_RESEL_ABS_ATN 0x41000000 474 #define SCR_RESEL_TBL 0x42000000 475 #define SCR_RESEL_TBL_ATN 0x43000000 476 #endif 477 478 struct sym_tblsel { 479 u_char sel_scntl4; /* C1010 only */ 480 u_char sel_sxfer; 481 u_char sel_id; 482 u_char sel_scntl3; 483 }; 484 485 #define SCR_JMP_REL 0x04000000 486 #define SCR_ID(id) (((u32)(id)) << 16) 487 488 /*----------------------------------------------------------- 489 * 490 * Waiting for Disconnect or Reselect 491 * 492 *----------------------------------------------------------- 493 * 494 * WAIT_DISC 495 * dummy: <<alternate_address>> 496 * 497 * WAIT_RESEL 498 * <<alternate_address>> 499 * 500 *----------------------------------------------------------- 501 */ 502 503 #define SCR_WAIT_DISC 0x48000000 504 #define SCR_WAIT_RESEL 0x50000000 505 506 #ifdef SYM_CONF_TARGET_ROLE_SUPPORT 507 #define SCR_DISCONNECT 0x48000000 508 #endif 509 510 /*----------------------------------------------------------- 511 * 512 * Bit Set / Reset 513 * 514 *----------------------------------------------------------- 515 * 516 * SET (flags {|.. }) 517 * 518 * CLR (flags {|.. }) 519 * 520 *----------------------------------------------------------- 521 */ 522 523 #define SCR_SET(f) (0x58000000 | (f)) 524 #define SCR_CLR(f) (0x60000000 | (f)) 525 526 #define SCR_CARRY 0x00000400 527 #define SCR_TRG 0x00000200 528 #define SCR_ACK 0x00000040 529 #define SCR_ATN 0x00000008 530 531 532 /*----------------------------------------------------------- 533 * 534 * Memory to memory move 535 * 536 *----------------------------------------------------------- 537 * 538 * COPY (bytecount) 539 * << source_address >> 540 * << destination_address >> 541 * 542 * SCR_COPY sets the NO FLUSH option by default. 543 * SCR_COPY_F does not set this option. 544 * 545 * For chips which do not support this option, 546 * sym_fw_bind_script() will remove this bit. 547 * 548 *----------------------------------------------------------- 549 */ 550 551 #define SCR_NO_FLUSH 0x01000000 552 553 #define SCR_COPY(n) (0xc0000000 | SCR_NO_FLUSH | (n)) 554 #define SCR_COPY_F(n) (0xc0000000 | (n)) 555 556 /*----------------------------------------------------------- 557 * 558 * Register move and binary operations 559 * 560 *----------------------------------------------------------- 561 * 562 * SFBR_REG (reg, op, data) reg = SFBR op data 563 * << 0 >> 564 * 565 * REG_SFBR (reg, op, data) SFBR = reg op data 566 * << 0 >> 567 * 568 * REG_REG (reg, op, data) reg = reg op data 569 * << 0 >> 570 * 571 *----------------------------------------------------------- 572 * 573 * On 825A, 875, 895 and 896 chips the content 574 * of SFBR register can be used as data (SCR_SFBR_DATA). 575 * The 896 has additionnal IO registers starting at 576 * offset 0x80. Bit 7 of register offset is stored in 577 * bit 7 of the SCRIPTS instruction first DWORD. 578 * 579 *----------------------------------------------------------- 580 */ 581 582 #define SCR_REG_OFS(ofs) ((((ofs) & 0x7f) << 16ul) + ((ofs) & 0x80)) 583 584 #define SCR_SFBR_REG(reg,op,data) \ 585 (0x68000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul)) 586 587 #define SCR_REG_SFBR(reg,op,data) \ 588 (0x70000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul)) 589 590 #define SCR_REG_REG(reg,op,data) \ 591 (0x78000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul)) 592 593 594 #define SCR_LOAD 0x00000000 595 #define SCR_SHL 0x01000000 596 #define SCR_OR 0x02000000 597 #define SCR_XOR 0x03000000 598 #define SCR_AND 0x04000000 599 #define SCR_SHR 0x05000000 600 #define SCR_ADD 0x06000000 601 #define SCR_ADDC 0x07000000 602 603 #define SCR_SFBR_DATA (0x00800000>>8ul) /* Use SFBR as data */ 604 605 /*----------------------------------------------------------- 606 * 607 * FROM_REG (reg) SFBR = reg 608 * << 0 >> 609 * 610 * TO_REG (reg) reg = SFBR 611 * << 0 >> 612 * 613 * LOAD_REG (reg, data) reg = <data> 614 * << 0 >> 615 * 616 * LOAD_SFBR(data) SFBR = <data> 617 * << 0 >> 618 * 619 *----------------------------------------------------------- 620 */ 621 622 #define SCR_FROM_REG(reg) \ 623 SCR_REG_SFBR(reg,SCR_OR,0) 624 625 #define SCR_TO_REG(reg) \ 626 SCR_SFBR_REG(reg,SCR_OR,0) 627 628 #define SCR_LOAD_REG(reg,data) \ 629 SCR_REG_REG(reg,SCR_LOAD,data) 630 631 #define SCR_LOAD_SFBR(data) \ 632 (SCR_REG_SFBR (gpreg, SCR_LOAD, data)) 633 634 /*----------------------------------------------------------- 635 * 636 * LOAD from memory to register. 637 * STORE from register to memory. 638 * 639 * Only supported by 810A, 860, 825A, 875, 895 and 896. 640 * 641 *----------------------------------------------------------- 642 * 643 * LOAD_ABS (LEN) 644 * <<start address>> 645 * 646 * LOAD_REL (LEN) (DSA relative) 647 * <<dsa_offset>> 648 * 649 *----------------------------------------------------------- 650 */ 651 652 #define SCR_REG_OFS2(ofs) (((ofs) & 0xff) << 16ul) 653 #define SCR_NO_FLUSH2 0x02000000 654 #define SCR_DSA_REL2 0x10000000 655 656 #define SCR_LOAD_R(reg, how, n) \ 657 (0xe1000000 | how | (SCR_REG_OFS2(REG(reg))) | (n)) 658 659 #define SCR_STORE_R(reg, how, n) \ 660 (0xe0000000 | how | (SCR_REG_OFS2(REG(reg))) | (n)) 661 662 #define SCR_LOAD_ABS(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2, n) 663 #define SCR_LOAD_REL(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2, n) 664 #define SCR_LOAD_ABS_F(reg, n) SCR_LOAD_R(reg, 0, n) 665 #define SCR_LOAD_REL_F(reg, n) SCR_LOAD_R(reg, SCR_DSA_REL2, n) 666 667 #define SCR_STORE_ABS(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2, n) 668 #define SCR_STORE_REL(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2,n) 669 #define SCR_STORE_ABS_F(reg, n) SCR_STORE_R(reg, 0, n) 670 #define SCR_STORE_REL_F(reg, n) SCR_STORE_R(reg, SCR_DSA_REL2, n) 671 672 673 /*----------------------------------------------------------- 674 * 675 * Waiting for Disconnect or Reselect 676 * 677 *----------------------------------------------------------- 678 * 679 * JUMP [ | IFTRUE/IFFALSE ( ... ) ] 680 * <<address>> 681 * 682 * JUMPR [ | IFTRUE/IFFALSE ( ... ) ] 683 * <<distance>> 684 * 685 * CALL [ | IFTRUE/IFFALSE ( ... ) ] 686 * <<address>> 687 * 688 * CALLR [ | IFTRUE/IFFALSE ( ... ) ] 689 * <<distance>> 690 * 691 * RETURN [ | IFTRUE/IFFALSE ( ... ) ] 692 * <<dummy>> 693 * 694 * INT [ | IFTRUE/IFFALSE ( ... ) ] 695 * <<ident>> 696 * 697 * INT_FLY [ | IFTRUE/IFFALSE ( ... ) ] 698 * <<ident>> 699 * 700 * Conditions: 701 * WHEN (phase) 702 * IF (phase) 703 * CARRYSET 704 * DATA (data, mask) 705 * 706 *----------------------------------------------------------- 707 */ 708 709 #define SCR_NO_OP 0x80000000 710 #define SCR_JUMP 0x80080000 711 #define SCR_JUMP64 0x80480000 712 #define SCR_JUMPR 0x80880000 713 #define SCR_CALL 0x88080000 714 #define SCR_CALLR 0x88880000 715 #define SCR_RETURN 0x90080000 716 #define SCR_INT 0x98080000 717 #define SCR_INT_FLY 0x98180000 718 719 #define IFFALSE(arg) (0x00080000 | (arg)) 720 #define IFTRUE(arg) (0x00000000 | (arg)) 721 722 #define WHEN(phase) (0x00030000 | (phase)) 723 #define IF(phase) (0x00020000 | (phase)) 724 725 #define DATA(D) (0x00040000 | ((D) & 0xff)) 726 #define MASK(D,M) (0x00040000 | (((M ^ 0xff) & 0xff) << 8ul)|((D) & 0xff)) 727 728 #define CARRYSET (0x00200000) 729 730 /*----------------------------------------------------------- 731 * 732 * SCSI constants. 733 * 734 *----------------------------------------------------------- 735 */ 736 737 /* 738 * Messages 739 */ 740 741 #define M_COMPLETE COMMAND_COMPLETE 742 #define M_EXTENDED EXTENDED_MESSAGE 743 #define M_SAVE_DP SAVE_POINTERS 744 #define M_RESTORE_DP RESTORE_POINTERS 745 #define M_DISCONNECT DISCONNECT 746 #define M_ID_ERROR INITIATOR_ERROR 747 #define M_ABORT ABORT_TASK_SET 748 #define M_REJECT MESSAGE_REJECT 749 #define M_NOOP NOP 750 #define M_PARITY MSG_PARITY_ERROR 751 #define M_LCOMPLETE LINKED_CMD_COMPLETE 752 #define M_FCOMPLETE LINKED_FLG_CMD_COMPLETE 753 #define M_RESET TARGET_RESET 754 #define M_ABORT_TAG ABORT_TASK 755 #define M_CLEAR_QUEUE CLEAR_TASK_SET 756 #define M_INIT_REC INITIATE_RECOVERY 757 #define M_REL_REC RELEASE_RECOVERY 758 #define M_TERMINATE (0x11) 759 #define M_SIMPLE_TAG SIMPLE_QUEUE_TAG 760 #define M_HEAD_TAG HEAD_OF_QUEUE_TAG 761 #define M_ORDERED_TAG ORDERED_QUEUE_TAG 762 #define M_IGN_RESIDUE IGNORE_WIDE_RESIDUE 763 764 #define M_X_MODIFY_DP EXTENDED_MODIFY_DATA_POINTER 765 #define M_X_SYNC_REQ EXTENDED_SDTR 766 #define M_X_WIDE_REQ EXTENDED_WDTR 767 #define M_X_PPR_REQ EXTENDED_PPR 768 769 /* 770 * PPR protocol options 771 */ 772 #define PPR_OPT_IU (0x01) 773 #define PPR_OPT_DT (0x02) 774 #define PPR_OPT_QAS (0x04) 775 #define PPR_OPT_MASK (0x07) 776 777 /* 778 * Status 779 */ 780 781 #define S_GOOD SAM_STAT_GOOD 782 #define S_CHECK_COND SAM_STAT_CHECK_CONDITION 783 #define S_COND_MET SAM_STAT_CONDITION_MET 784 #define S_BUSY SAM_STAT_BUSY 785 #define S_INT SAM_STAT_INTERMEDIATE 786 #define S_INT_COND_MET SAM_STAT_INTERMEDIATE_CONDITION_MET 787 #define S_CONFLICT SAM_STAT_RESERVATION_CONFLICT 788 #define S_TERMINATED SAM_STAT_COMMAND_TERMINATED 789 #define S_QUEUE_FULL SAM_STAT_TASK_SET_FULL 790 #define S_ILLEGAL (0xff) 791 792 #endif /* defined SYM_DEFS_H */ 793