1 2 #ifndef _ST_H 3 #define _ST_H 4 5 #include <linux/completion.h> 6 #include <linux/mutex.h> 7 #include <linux/kref.h> 8 #include <scsi/scsi_cmnd.h> 9 10 /* Descriptor for analyzed sense data */ 11 struct st_cmdstatus { 12 int midlevel_result; 13 struct scsi_sense_hdr sense_hdr; 14 int have_sense; 15 int residual; 16 u64 uremainder64; 17 u8 flags; 18 u8 remainder_valid; 19 u8 fixed_format; 20 u8 deferred; 21 }; 22 23 struct scsi_tape; 24 25 /* scsi tape command */ 26 struct st_request { 27 unsigned char cmd[MAX_COMMAND_SIZE]; 28 unsigned char sense[SCSI_SENSE_BUFFERSIZE]; 29 int result; 30 struct scsi_tape *stp; 31 struct completion *waiting; 32 struct bio *bio; 33 }; 34 35 /* The tape buffer descriptor. */ 36 struct st_buffer { 37 unsigned char dma; /* DMA-able buffer */ 38 unsigned char cleared; /* internal buffer cleared after open? */ 39 unsigned short do_dio; /* direct i/o set up? */ 40 int buffer_size; 41 int buffer_blocks; 42 int buffer_bytes; 43 int read_pointer; 44 int writing; 45 int syscall_result; 46 struct st_request *last_SRpnt; 47 struct st_cmdstatus cmdstat; 48 struct page **reserved_pages; 49 int reserved_page_order; 50 struct page **mapped_pages; 51 struct rq_map_data map_data; 52 unsigned char *b_data; 53 unsigned short use_sg; /* zero or max number of s/g segments for this adapter */ 54 unsigned short sg_segs; /* number of segments in s/g list */ 55 unsigned short frp_segs; /* number of buffer segments */ 56 }; 57 58 /* The tape mode definition */ 59 struct st_modedef { 60 unsigned char defined; 61 unsigned char sysv; /* SYS V semantics? */ 62 unsigned char do_async_writes; 63 unsigned char do_buffer_writes; 64 unsigned char do_read_ahead; 65 unsigned char defaults_for_writes; 66 unsigned char default_compression; /* 0 = don't touch, etc */ 67 short default_density; /* Forced density, -1 = no value */ 68 int default_blksize; /* Forced blocksize, -1 = no value */ 69 struct scsi_tape *tape; 70 struct device *devs[2]; /* Auto-rewind and non-rewind devices */ 71 struct cdev *cdevs[2]; /* Auto-rewind and non-rewind devices */ 72 }; 73 74 /* Number of modes can be changed by changing ST_NBR_MODE_BITS. The maximum 75 number of modes is 16 (ST_NBR_MODE_BITS 4) */ 76 #define ST_NBR_MODE_BITS 2 77 #define ST_NBR_MODES (1 << ST_NBR_MODE_BITS) 78 #define ST_MODE_SHIFT (7 - ST_NBR_MODE_BITS) 79 #define ST_MODE_MASK ((ST_NBR_MODES - 1) << ST_MODE_SHIFT) 80 81 #define ST_MAX_TAPES (1 << (20 - (ST_NBR_MODE_BITS + 1))) 82 #define ST_MAX_TAPE_ENTRIES (ST_MAX_TAPES << (ST_NBR_MODE_BITS + 1)) 83 84 /* The status related to each partition */ 85 struct st_partstat { 86 unsigned char rw; 87 unsigned char eof; 88 unsigned char at_sm; 89 unsigned char last_block_valid; 90 u32 last_block_visited; 91 int drv_block; /* The block where the drive head is */ 92 int drv_file; 93 }; 94 95 #define ST_NBR_PARTITIONS 4 96 97 /* The tape drive descriptor */ 98 struct scsi_tape { 99 struct scsi_driver *driver; 100 struct scsi_device *device; 101 struct mutex lock; /* For serialization */ 102 struct completion wait; /* For SCSI commands */ 103 struct st_buffer *buffer; 104 int index; 105 106 /* Drive characteristics */ 107 unsigned char omit_blklims; 108 unsigned char do_auto_lock; 109 unsigned char can_bsr; 110 unsigned char can_partitions; 111 unsigned char two_fm; 112 unsigned char fast_mteom; 113 unsigned char immediate; 114 unsigned char restr_dma; 115 unsigned char scsi2_logical; 116 unsigned char default_drvbuffer; /* 0xff = don't touch, value 3 bits */ 117 unsigned char cln_mode; /* 0 = none, otherwise sense byte nbr */ 118 unsigned char cln_sense_value; 119 unsigned char cln_sense_mask; 120 unsigned char use_pf; /* Set Page Format bit in all mode selects? */ 121 unsigned char try_dio; /* try direct i/o in general? */ 122 unsigned char try_dio_now; /* try direct i/o before next close? */ 123 unsigned char c_algo; /* compression algorithm */ 124 unsigned char pos_unknown; /* after reset position unknown */ 125 unsigned char sili; /* use SILI when reading in variable b mode */ 126 unsigned char immediate_filemark; /* write filemark immediately */ 127 int tape_type; 128 int long_timeout; /* timeout for commands known to take long time */ 129 130 unsigned long max_pfn; /* the maximum page number reachable by the HBA */ 131 132 /* Mode characteristics */ 133 struct st_modedef modes[ST_NBR_MODES]; 134 int current_mode; 135 136 /* Status variables */ 137 int partition; 138 int new_partition; 139 int nbr_partitions; /* zero until partition support enabled */ 140 struct st_partstat ps[ST_NBR_PARTITIONS]; 141 unsigned char dirty; 142 unsigned char ready; 143 unsigned char write_prot; 144 unsigned char drv_write_prot; 145 unsigned char in_use; 146 unsigned char blksize_changed; 147 unsigned char density_changed; 148 unsigned char compression_changed; 149 unsigned char drv_buffer; 150 unsigned char density; 151 unsigned char door_locked; 152 unsigned char autorew_dev; /* auto-rewind device */ 153 unsigned char rew_at_close; /* rewind necessary at close */ 154 unsigned char inited; 155 unsigned char cleaning_req; /* cleaning requested? */ 156 int block_size; 157 int min_block; 158 int max_block; 159 int recover_count; /* From tape opening */ 160 int recover_reg; /* From last status call */ 161 162 #if DEBUG 163 unsigned char write_pending; 164 int nbr_finished; 165 int nbr_waits; 166 int nbr_requests; 167 int nbr_dio; 168 int nbr_pages; 169 unsigned char last_cmnd[6]; 170 unsigned char last_sense[16]; 171 #endif 172 struct gendisk *disk; 173 struct kref kref; 174 }; 175 176 /* Bit masks for use_pf */ 177 #define USE_PF 1 178 #define PF_TESTED 2 179 180 /* Values of eof */ 181 #define ST_NOEOF 0 182 #define ST_FM_HIT 1 183 #define ST_FM 2 184 #define ST_EOM_OK 3 185 #define ST_EOM_ERROR 4 186 #define ST_EOD_1 5 187 #define ST_EOD_2 6 188 #define ST_EOD 7 189 /* EOD hit while reading => ST_EOD_1 => return zero => ST_EOD_2 => 190 return zero => ST_EOD, return ENOSPC */ 191 /* When writing: ST_EOM_OK == early warning found, write OK 192 ST_EOD_1 == allow trying new write after early warning 193 ST_EOM_ERROR == early warning found, not able to write all */ 194 195 /* Values of rw */ 196 #define ST_IDLE 0 197 #define ST_READING 1 198 #define ST_WRITING 2 199 200 /* Values of ready state */ 201 #define ST_READY 0 202 #define ST_NOT_READY 1 203 #define ST_NO_TAPE 2 204 205 /* Values for door lock state */ 206 #define ST_UNLOCKED 0 207 #define ST_LOCKED_EXPLICIT 1 208 #define ST_LOCKED_AUTO 2 209 #define ST_LOCK_FAILS 3 210 211 /* Positioning SCSI-commands for Tandberg, etc. drives */ 212 #define QFA_REQUEST_BLOCK 0x02 213 #define QFA_SEEK_BLOCK 0x0c 214 215 /* Setting the binary options */ 216 #define ST_DONT_TOUCH 0 217 #define ST_NO 1 218 #define ST_YES 2 219 220 #define EXTENDED_SENSE_START 18 221 222 /* Masks for some conditions in the sense data */ 223 #define SENSE_FMK 0x80 224 #define SENSE_EOM 0x40 225 #define SENSE_ILI 0x20 226 227 #endif 228