1 /* 2 SCSI Tape Driver for Linux version 1.1 and newer. See the accompanying 3 file Documentation/scsi/st.txt for more information. 4 5 History: 6 Rewritten from Dwayne Forsyth's SCSI tape driver by Kai Makisara. 7 Contribution and ideas from several people including (in alphabetical 8 order) Klaus Ehrenfried, Eugene Exarevsky, Eric Lee Green, Wolfgang Denk, 9 Steve Hirsch, Andreas Koppenh"ofer, Michael Leodolter, Eyal Lebedinsky, 10 Michael Schaefer, J"org Weule, and Eric Youngdale. 11 12 Copyright 1992 - 2010 Kai Makisara 13 email Kai.Makisara@kolumbus.fi 14 15 Some small formal changes - aeb, 950809 16 17 Last modified: 18-JAN-1998 Richard Gooch <rgooch@atnf.csiro.au> Devfs support 18 */ 19 20 static const char *verstr = "20101219"; 21 22 #include <linux/module.h> 23 24 #include <linux/fs.h> 25 #include <linux/kernel.h> 26 #include <linux/sched.h> 27 #include <linux/mm.h> 28 #include <linux/init.h> 29 #include <linux/string.h> 30 #include <linux/slab.h> 31 #include <linux/errno.h> 32 #include <linux/mtio.h> 33 #include <linux/cdrom.h> 34 #include <linux/ioctl.h> 35 #include <linux/fcntl.h> 36 #include <linux/spinlock.h> 37 #include <linux/blkdev.h> 38 #include <linux/moduleparam.h> 39 #include <linux/cdev.h> 40 #include <linux/idr.h> 41 #include <linux/delay.h> 42 #include <linux/mutex.h> 43 44 #include <asm/uaccess.h> 45 #include <asm/dma.h> 46 47 #include <scsi/scsi.h> 48 #include <scsi/scsi_dbg.h> 49 #include <scsi/scsi_device.h> 50 #include <scsi/scsi_driver.h> 51 #include <scsi/scsi_eh.h> 52 #include <scsi/scsi_host.h> 53 #include <scsi/scsi_ioctl.h> 54 #include <scsi/sg.h> 55 56 57 /* The driver prints some debugging information on the console if DEBUG 58 is defined and non-zero. */ 59 #define DEBUG 1 60 #define NO_DEBUG 0 61 62 #define ST_DEB_MSG KERN_NOTICE 63 #if DEBUG 64 /* The message level for the debug messages is currently set to KERN_NOTICE 65 so that people can easily see the messages. Later when the debugging messages 66 in the drivers are more widely classified, this may be changed to KERN_DEBUG. */ 67 #define DEB(a) a 68 #define DEBC(a) if (debugging) { a ; } 69 #else 70 #define DEB(a) 71 #define DEBC(a) 72 #endif 73 74 #define ST_KILOBYTE 1024 75 76 #include "st_options.h" 77 #include "st.h" 78 79 static int buffer_kbs; 80 static int max_sg_segs; 81 static int try_direct_io = TRY_DIRECT_IO; 82 static int try_rdio = 1; 83 static int try_wdio = 1; 84 static int debug_flag; 85 86 static struct class st_sysfs_class; 87 static const struct attribute_group *st_dev_groups[]; 88 89 MODULE_AUTHOR("Kai Makisara"); 90 MODULE_DESCRIPTION("SCSI tape (st) driver"); 91 MODULE_LICENSE("GPL"); 92 MODULE_ALIAS_CHARDEV_MAJOR(SCSI_TAPE_MAJOR); 93 MODULE_ALIAS_SCSI_DEVICE(TYPE_TAPE); 94 95 /* Set 'perm' (4th argument) to 0 to disable module_param's definition 96 * of sysfs parameters (which module_param doesn't yet support). 97 * Sysfs parameters defined explicitly later. 98 */ 99 module_param_named(buffer_kbs, buffer_kbs, int, 0); 100 MODULE_PARM_DESC(buffer_kbs, "Default driver buffer size for fixed block mode (KB; 32)"); 101 module_param_named(max_sg_segs, max_sg_segs, int, 0); 102 MODULE_PARM_DESC(max_sg_segs, "Maximum number of scatter/gather segments to use (256)"); 103 module_param_named(try_direct_io, try_direct_io, int, 0); 104 MODULE_PARM_DESC(try_direct_io, "Try direct I/O between user buffer and tape drive (1)"); 105 module_param_named(debug_flag, debug_flag, int, 0); 106 MODULE_PARM_DESC(debug_flag, "Enable DEBUG, same as setting debugging=1"); 107 108 109 /* Extra parameters for testing */ 110 module_param_named(try_rdio, try_rdio, int, 0); 111 MODULE_PARM_DESC(try_rdio, "Try direct read i/o when possible"); 112 module_param_named(try_wdio, try_wdio, int, 0); 113 MODULE_PARM_DESC(try_wdio, "Try direct write i/o when possible"); 114 115 #ifndef MODULE 116 static int write_threshold_kbs; /* retained for compatibility */ 117 static struct st_dev_parm { 118 char *name; 119 int *val; 120 } parms[] __initdata = { 121 { 122 "buffer_kbs", &buffer_kbs 123 }, 124 { /* Retained for compatibility with 2.4 */ 125 "write_threshold_kbs", &write_threshold_kbs 126 }, 127 { 128 "max_sg_segs", NULL 129 }, 130 { 131 "try_direct_io", &try_direct_io 132 }, 133 { 134 "debug_flag", &debug_flag 135 } 136 }; 137 #endif 138 139 /* Restrict the number of modes so that names for all are assigned */ 140 #if ST_NBR_MODES > 16 141 #error "Maximum number of modes is 16" 142 #endif 143 /* Bit reversed order to get same names for same minors with all 144 mode counts */ 145 static const char *st_formats[] = { 146 "", "r", "k", "s", "l", "t", "o", "u", 147 "m", "v", "p", "x", "a", "y", "q", "z"}; 148 149 /* The default definitions have been moved to st_options.h */ 150 151 #define ST_FIXED_BUFFER_SIZE (ST_FIXED_BUFFER_BLOCKS * ST_KILOBYTE) 152 153 /* The buffer size should fit into the 24 bits for length in the 154 6-byte SCSI read and write commands. */ 155 #if ST_FIXED_BUFFER_SIZE >= (2 << 24 - 1) 156 #error "Buffer size should not exceed (2 << 24 - 1) bytes!" 157 #endif 158 159 static int debugging = DEBUG; 160 161 #define MAX_RETRIES 0 162 #define MAX_WRITE_RETRIES 0 163 #define MAX_READY_RETRIES 0 164 #define NO_TAPE NOT_READY 165 166 #define ST_TIMEOUT (900 * HZ) 167 #define ST_LONG_TIMEOUT (14000 * HZ) 168 169 /* Remove mode bits and auto-rewind bit (7) */ 170 #define TAPE_NR(x) ( ((iminor(x) & ~255) >> (ST_NBR_MODE_BITS + 1)) | \ 171 (iminor(x) & ~(-1 << ST_MODE_SHIFT)) ) 172 #define TAPE_MODE(x) ((iminor(x) & ST_MODE_MASK) >> ST_MODE_SHIFT) 173 174 /* Construct the minor number from the device (d), mode (m), and non-rewind (n) data */ 175 #define TAPE_MINOR(d, m, n) (((d & ~(255 >> (ST_NBR_MODE_BITS + 1))) << (ST_NBR_MODE_BITS + 1)) | \ 176 (d & (255 >> (ST_NBR_MODE_BITS + 1))) | (m << ST_MODE_SHIFT) | ((n != 0) << 7) ) 177 178 /* Internal ioctl to set both density (uppermost 8 bits) and blocksize (lower 179 24 bits) */ 180 #define SET_DENS_AND_BLK 0x10001 181 182 static int st_fixed_buffer_size = ST_FIXED_BUFFER_SIZE; 183 static int st_max_sg_segs = ST_MAX_SG; 184 185 static int modes_defined; 186 187 static int enlarge_buffer(struct st_buffer *, int, int); 188 static void clear_buffer(struct st_buffer *); 189 static void normalize_buffer(struct st_buffer *); 190 static int append_to_buffer(const char __user *, struct st_buffer *, int); 191 static int from_buffer(struct st_buffer *, char __user *, int); 192 static void move_buffer_data(struct st_buffer *, int); 193 194 static int sgl_map_user_pages(struct st_buffer *, const unsigned int, 195 unsigned long, size_t, int); 196 static int sgl_unmap_user_pages(struct st_buffer *, const unsigned int, int); 197 198 static int st_probe(struct device *); 199 static int st_remove(struct device *); 200 201 static int do_create_sysfs_files(void); 202 static void do_remove_sysfs_files(void); 203 204 static struct scsi_driver st_template = { 205 .gendrv = { 206 .name = "st", 207 .owner = THIS_MODULE, 208 .probe = st_probe, 209 .remove = st_remove, 210 }, 211 }; 212 213 static int st_compression(struct scsi_tape *, int); 214 215 static int find_partition(struct scsi_tape *); 216 static int switch_partition(struct scsi_tape *); 217 218 static int st_int_ioctl(struct scsi_tape *, unsigned int, unsigned long); 219 220 static void scsi_tape_release(struct kref *); 221 222 #define to_scsi_tape(obj) container_of(obj, struct scsi_tape, kref) 223 224 static DEFINE_MUTEX(st_ref_mutex); 225 static DEFINE_SPINLOCK(st_index_lock); 226 static DEFINE_SPINLOCK(st_use_lock); 227 static DEFINE_IDR(st_index_idr); 228 229 230 231 #include "osst_detect.h" 232 #ifndef SIGS_FROM_OSST 233 #define SIGS_FROM_OSST \ 234 {"OnStream", "SC-", "", "osst"}, \ 235 {"OnStream", "DI-", "", "osst"}, \ 236 {"OnStream", "DP-", "", "osst"}, \ 237 {"OnStream", "USB", "", "osst"}, \ 238 {"OnStream", "FW-", "", "osst"} 239 #endif 240 241 static struct scsi_tape *scsi_tape_get(int dev) 242 { 243 struct scsi_tape *STp = NULL; 244 245 mutex_lock(&st_ref_mutex); 246 spin_lock(&st_index_lock); 247 248 STp = idr_find(&st_index_idr, dev); 249 if (!STp) goto out; 250 251 kref_get(&STp->kref); 252 253 if (!STp->device) 254 goto out_put; 255 256 if (scsi_device_get(STp->device)) 257 goto out_put; 258 259 goto out; 260 261 out_put: 262 kref_put(&STp->kref, scsi_tape_release); 263 STp = NULL; 264 out: 265 spin_unlock(&st_index_lock); 266 mutex_unlock(&st_ref_mutex); 267 return STp; 268 } 269 270 static void scsi_tape_put(struct scsi_tape *STp) 271 { 272 struct scsi_device *sdev = STp->device; 273 274 mutex_lock(&st_ref_mutex); 275 kref_put(&STp->kref, scsi_tape_release); 276 scsi_device_put(sdev); 277 mutex_unlock(&st_ref_mutex); 278 } 279 280 struct st_reject_data { 281 char *vendor; 282 char *model; 283 char *rev; 284 char *driver_hint; /* Name of the correct driver, NULL if unknown */ 285 }; 286 287 static struct st_reject_data reject_list[] = { 288 /* {"XXX", "Yy-", "", NULL}, example */ 289 SIGS_FROM_OSST, 290 {NULL, }}; 291 292 /* If the device signature is on the list of incompatible drives, the 293 function returns a pointer to the name of the correct driver (if known) */ 294 static char * st_incompatible(struct scsi_device* SDp) 295 { 296 struct st_reject_data *rp; 297 298 for (rp=&(reject_list[0]); rp->vendor != NULL; rp++) 299 if (!strncmp(rp->vendor, SDp->vendor, strlen(rp->vendor)) && 300 !strncmp(rp->model, SDp->model, strlen(rp->model)) && 301 !strncmp(rp->rev, SDp->rev, strlen(rp->rev))) { 302 if (rp->driver_hint) 303 return rp->driver_hint; 304 else 305 return "unknown"; 306 } 307 return NULL; 308 } 309 310 311 static inline char *tape_name(struct scsi_tape *tape) 312 { 313 return tape->disk->disk_name; 314 } 315 316 #define st_printk(prefix, t, fmt, a...) \ 317 sdev_prefix_printk(prefix, (t)->device, tape_name(t), fmt, ##a) 318 #ifdef DEBUG 319 #define DEBC_printk(t, fmt, a...) \ 320 if (debugging) { st_printk(ST_DEB_MSG, t, fmt, ##a ); } 321 #else 322 #define DEBC_printk(t, fmt, a...) 323 #endif 324 325 static void st_analyze_sense(struct st_request *SRpnt, struct st_cmdstatus *s) 326 { 327 const u8 *ucp; 328 const u8 *sense = SRpnt->sense; 329 330 s->have_sense = scsi_normalize_sense(SRpnt->sense, 331 SCSI_SENSE_BUFFERSIZE, &s->sense_hdr); 332 s->flags = 0; 333 334 if (s->have_sense) { 335 s->deferred = 0; 336 s->remainder_valid = 337 scsi_get_sense_info_fld(sense, SCSI_SENSE_BUFFERSIZE, &s->uremainder64); 338 switch (sense[0] & 0x7f) { 339 case 0x71: 340 s->deferred = 1; 341 case 0x70: 342 s->fixed_format = 1; 343 s->flags = sense[2] & 0xe0; 344 break; 345 case 0x73: 346 s->deferred = 1; 347 case 0x72: 348 s->fixed_format = 0; 349 ucp = scsi_sense_desc_find(sense, SCSI_SENSE_BUFFERSIZE, 4); 350 s->flags = ucp ? (ucp[3] & 0xe0) : 0; 351 break; 352 } 353 } 354 } 355 356 357 /* Convert the result to success code */ 358 static int st_chk_result(struct scsi_tape *STp, struct st_request * SRpnt) 359 { 360 int result = SRpnt->result; 361 u8 scode; 362 DEB(const char *stp;) 363 char *name = tape_name(STp); 364 struct st_cmdstatus *cmdstatp; 365 366 if (!result) 367 return 0; 368 369 cmdstatp = &STp->buffer->cmdstat; 370 st_analyze_sense(SRpnt, cmdstatp); 371 372 if (cmdstatp->have_sense) 373 scode = STp->buffer->cmdstat.sense_hdr.sense_key; 374 else 375 scode = 0; 376 377 DEB( 378 if (debugging) { 379 st_printk(ST_DEB_MSG, STp, 380 "Error: %x, cmd: %x %x %x %x %x %x\n", result, 381 SRpnt->cmd[0], SRpnt->cmd[1], SRpnt->cmd[2], 382 SRpnt->cmd[3], SRpnt->cmd[4], SRpnt->cmd[5]); 383 if (cmdstatp->have_sense) 384 __scsi_print_sense(STp->device, name, 385 SRpnt->sense, SCSI_SENSE_BUFFERSIZE); 386 } ) /* end DEB */ 387 if (!debugging) { /* Abnormal conditions for tape */ 388 if (!cmdstatp->have_sense) 389 st_printk(KERN_WARNING, STp, 390 "Error %x (driver bt 0x%x, host bt 0x%x).\n", 391 result, driver_byte(result), host_byte(result)); 392 else if (cmdstatp->have_sense && 393 scode != NO_SENSE && 394 scode != RECOVERED_ERROR && 395 /* scode != UNIT_ATTENTION && */ 396 scode != BLANK_CHECK && 397 scode != VOLUME_OVERFLOW && 398 SRpnt->cmd[0] != MODE_SENSE && 399 SRpnt->cmd[0] != TEST_UNIT_READY) { 400 401 __scsi_print_sense(STp->device, name, 402 SRpnt->sense, SCSI_SENSE_BUFFERSIZE); 403 } 404 } 405 406 if (cmdstatp->fixed_format && 407 STp->cln_mode >= EXTENDED_SENSE_START) { /* Only fixed format sense */ 408 if (STp->cln_sense_value) 409 STp->cleaning_req |= ((SRpnt->sense[STp->cln_mode] & 410 STp->cln_sense_mask) == STp->cln_sense_value); 411 else 412 STp->cleaning_req |= ((SRpnt->sense[STp->cln_mode] & 413 STp->cln_sense_mask) != 0); 414 } 415 if (cmdstatp->have_sense && 416 cmdstatp->sense_hdr.asc == 0 && cmdstatp->sense_hdr.ascq == 0x17) 417 STp->cleaning_req = 1; /* ASC and ASCQ => cleaning requested */ 418 419 STp->pos_unknown |= STp->device->was_reset; 420 421 if (cmdstatp->have_sense && 422 scode == RECOVERED_ERROR 423 #if ST_RECOVERED_WRITE_FATAL 424 && SRpnt->cmd[0] != WRITE_6 425 && SRpnt->cmd[0] != WRITE_FILEMARKS 426 #endif 427 ) { 428 STp->recover_count++; 429 STp->recover_reg++; 430 431 DEB( 432 if (debugging) { 433 if (SRpnt->cmd[0] == READ_6) 434 stp = "read"; 435 else if (SRpnt->cmd[0] == WRITE_6) 436 stp = "write"; 437 else 438 stp = "ioctl"; 439 st_printk(ST_DEB_MSG, STp, 440 "Recovered %s error (%d).\n", 441 stp, STp->recover_count); 442 } ) /* end DEB */ 443 444 if (cmdstatp->flags == 0) 445 return 0; 446 } 447 return (-EIO); 448 } 449 450 static struct st_request *st_allocate_request(struct scsi_tape *stp) 451 { 452 struct st_request *streq; 453 454 streq = kzalloc(sizeof(*streq), GFP_KERNEL); 455 if (streq) 456 streq->stp = stp; 457 else { 458 st_printk(KERN_ERR, stp, 459 "Can't get SCSI request.\n"); 460 if (signal_pending(current)) 461 stp->buffer->syscall_result = -EINTR; 462 else 463 stp->buffer->syscall_result = -EBUSY; 464 } 465 466 return streq; 467 } 468 469 static void st_release_request(struct st_request *streq) 470 { 471 kfree(streq); 472 } 473 474 static void st_scsi_execute_end(struct request *req, int uptodate) 475 { 476 struct st_request *SRpnt = req->end_io_data; 477 struct scsi_tape *STp = SRpnt->stp; 478 struct bio *tmp; 479 480 STp->buffer->cmdstat.midlevel_result = SRpnt->result = req->errors; 481 STp->buffer->cmdstat.residual = req->resid_len; 482 483 tmp = SRpnt->bio; 484 if (SRpnt->waiting) 485 complete(SRpnt->waiting); 486 487 blk_rq_unmap_user(tmp); 488 __blk_put_request(req->q, req); 489 } 490 491 static int st_scsi_execute(struct st_request *SRpnt, const unsigned char *cmd, 492 int data_direction, void *buffer, unsigned bufflen, 493 int timeout, int retries) 494 { 495 struct request *req; 496 struct rq_map_data *mdata = &SRpnt->stp->buffer->map_data; 497 int err = 0; 498 int write = (data_direction == DMA_TO_DEVICE); 499 500 req = blk_get_request(SRpnt->stp->device->request_queue, write, 501 GFP_KERNEL); 502 if (IS_ERR(req)) 503 return DRIVER_ERROR << 24; 504 505 blk_rq_set_block_pc(req); 506 req->cmd_flags |= REQ_QUIET; 507 508 mdata->null_mapped = 1; 509 510 if (bufflen) { 511 err = blk_rq_map_user(req->q, req, mdata, NULL, bufflen, 512 GFP_KERNEL); 513 if (err) { 514 blk_put_request(req); 515 return DRIVER_ERROR << 24; 516 } 517 } 518 519 SRpnt->bio = req->bio; 520 req->cmd_len = COMMAND_SIZE(cmd[0]); 521 memset(req->cmd, 0, BLK_MAX_CDB); 522 memcpy(req->cmd, cmd, req->cmd_len); 523 req->sense = SRpnt->sense; 524 req->sense_len = 0; 525 req->timeout = timeout; 526 req->retries = retries; 527 req->end_io_data = SRpnt; 528 529 blk_execute_rq_nowait(req->q, NULL, req, 1, st_scsi_execute_end); 530 return 0; 531 } 532 533 /* Do the scsi command. Waits until command performed if do_wait is true. 534 Otherwise write_behind_check() is used to check that the command 535 has finished. */ 536 static struct st_request * 537 st_do_scsi(struct st_request * SRpnt, struct scsi_tape * STp, unsigned char *cmd, 538 int bytes, int direction, int timeout, int retries, int do_wait) 539 { 540 struct completion *waiting; 541 struct rq_map_data *mdata = &STp->buffer->map_data; 542 int ret; 543 544 /* if async, make sure there's no command outstanding */ 545 if (!do_wait && ((STp->buffer)->last_SRpnt)) { 546 st_printk(KERN_ERR, STp, 547 "Async command already active.\n"); 548 if (signal_pending(current)) 549 (STp->buffer)->syscall_result = (-EINTR); 550 else 551 (STp->buffer)->syscall_result = (-EBUSY); 552 return NULL; 553 } 554 555 if (!SRpnt) { 556 SRpnt = st_allocate_request(STp); 557 if (!SRpnt) 558 return NULL; 559 } 560 561 /* If async IO, set last_SRpnt. This ptr tells write_behind_check 562 which IO is outstanding. It's nulled out when the IO completes. */ 563 if (!do_wait) 564 (STp->buffer)->last_SRpnt = SRpnt; 565 566 waiting = &STp->wait; 567 init_completion(waiting); 568 SRpnt->waiting = waiting; 569 570 if (STp->buffer->do_dio) { 571 mdata->page_order = 0; 572 mdata->nr_entries = STp->buffer->sg_segs; 573 mdata->pages = STp->buffer->mapped_pages; 574 } else { 575 mdata->page_order = STp->buffer->reserved_page_order; 576 mdata->nr_entries = 577 DIV_ROUND_UP(bytes, PAGE_SIZE << mdata->page_order); 578 mdata->pages = STp->buffer->reserved_pages; 579 mdata->offset = 0; 580 } 581 582 memcpy(SRpnt->cmd, cmd, sizeof(SRpnt->cmd)); 583 STp->buffer->cmdstat.have_sense = 0; 584 STp->buffer->syscall_result = 0; 585 586 ret = st_scsi_execute(SRpnt, cmd, direction, NULL, bytes, timeout, 587 retries); 588 if (ret) { 589 /* could not allocate the buffer or request was too large */ 590 (STp->buffer)->syscall_result = (-EBUSY); 591 (STp->buffer)->last_SRpnt = NULL; 592 } else if (do_wait) { 593 wait_for_completion(waiting); 594 SRpnt->waiting = NULL; 595 (STp->buffer)->syscall_result = st_chk_result(STp, SRpnt); 596 } 597 598 return SRpnt; 599 } 600 601 602 /* Handle the write-behind checking (waits for completion). Returns -ENOSPC if 603 write has been correct but EOM early warning reached, -EIO if write ended in 604 error or zero if write successful. Asynchronous writes are used only in 605 variable block mode. */ 606 static int write_behind_check(struct scsi_tape * STp) 607 { 608 int retval = 0; 609 struct st_buffer *STbuffer; 610 struct st_partstat *STps; 611 struct st_cmdstatus *cmdstatp; 612 struct st_request *SRpnt; 613 614 STbuffer = STp->buffer; 615 if (!STbuffer->writing) 616 return 0; 617 618 DEB( 619 if (STp->write_pending) 620 STp->nbr_waits++; 621 else 622 STp->nbr_finished++; 623 ) /* end DEB */ 624 625 wait_for_completion(&(STp->wait)); 626 SRpnt = STbuffer->last_SRpnt; 627 STbuffer->last_SRpnt = NULL; 628 SRpnt->waiting = NULL; 629 630 (STp->buffer)->syscall_result = st_chk_result(STp, SRpnt); 631 st_release_request(SRpnt); 632 633 STbuffer->buffer_bytes -= STbuffer->writing; 634 STps = &(STp->ps[STp->partition]); 635 if (STps->drv_block >= 0) { 636 if (STp->block_size == 0) 637 STps->drv_block++; 638 else 639 STps->drv_block += STbuffer->writing / STp->block_size; 640 } 641 642 cmdstatp = &STbuffer->cmdstat; 643 if (STbuffer->syscall_result) { 644 retval = -EIO; 645 if (cmdstatp->have_sense && !cmdstatp->deferred && 646 (cmdstatp->flags & SENSE_EOM) && 647 (cmdstatp->sense_hdr.sense_key == NO_SENSE || 648 cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR)) { 649 /* EOM at write-behind, has all data been written? */ 650 if (!cmdstatp->remainder_valid || 651 cmdstatp->uremainder64 == 0) 652 retval = -ENOSPC; 653 } 654 if (retval == -EIO) 655 STps->drv_block = -1; 656 } 657 STbuffer->writing = 0; 658 659 DEB(if (debugging && retval) 660 st_printk(ST_DEB_MSG, STp, 661 "Async write error %x, return value %d.\n", 662 STbuffer->cmdstat.midlevel_result, retval);) /* end DEB */ 663 664 return retval; 665 } 666 667 668 /* Step over EOF if it has been inadvertently crossed (ioctl not used because 669 it messes up the block number). */ 670 static int cross_eof(struct scsi_tape * STp, int forward) 671 { 672 struct st_request *SRpnt; 673 unsigned char cmd[MAX_COMMAND_SIZE]; 674 675 cmd[0] = SPACE; 676 cmd[1] = 0x01; /* Space FileMarks */ 677 if (forward) { 678 cmd[2] = cmd[3] = 0; 679 cmd[4] = 1; 680 } else 681 cmd[2] = cmd[3] = cmd[4] = 0xff; /* -1 filemarks */ 682 cmd[5] = 0; 683 684 DEBC_printk(STp, "Stepping over filemark %s.\n", 685 forward ? "forward" : "backward"); 686 687 SRpnt = st_do_scsi(NULL, STp, cmd, 0, DMA_NONE, 688 STp->device->request_queue->rq_timeout, 689 MAX_RETRIES, 1); 690 if (!SRpnt) 691 return (STp->buffer)->syscall_result; 692 693 st_release_request(SRpnt); 694 SRpnt = NULL; 695 696 if ((STp->buffer)->cmdstat.midlevel_result != 0) 697 st_printk(KERN_ERR, STp, 698 "Stepping over filemark %s failed.\n", 699 forward ? "forward" : "backward"); 700 701 return (STp->buffer)->syscall_result; 702 } 703 704 705 /* Flush the write buffer (never need to write if variable blocksize). */ 706 static int st_flush_write_buffer(struct scsi_tape * STp) 707 { 708 int transfer, blks; 709 int result; 710 unsigned char cmd[MAX_COMMAND_SIZE]; 711 struct st_request *SRpnt; 712 struct st_partstat *STps; 713 714 result = write_behind_check(STp); 715 if (result) 716 return result; 717 718 result = 0; 719 if (STp->dirty == 1) { 720 721 transfer = STp->buffer->buffer_bytes; 722 DEBC_printk(STp, "Flushing %d bytes.\n", transfer); 723 724 memset(cmd, 0, MAX_COMMAND_SIZE); 725 cmd[0] = WRITE_6; 726 cmd[1] = 1; 727 blks = transfer / STp->block_size; 728 cmd[2] = blks >> 16; 729 cmd[3] = blks >> 8; 730 cmd[4] = blks; 731 732 SRpnt = st_do_scsi(NULL, STp, cmd, transfer, DMA_TO_DEVICE, 733 STp->device->request_queue->rq_timeout, 734 MAX_WRITE_RETRIES, 1); 735 if (!SRpnt) 736 return (STp->buffer)->syscall_result; 737 738 STps = &(STp->ps[STp->partition]); 739 if ((STp->buffer)->syscall_result != 0) { 740 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat; 741 742 if (cmdstatp->have_sense && !cmdstatp->deferred && 743 (cmdstatp->flags & SENSE_EOM) && 744 (cmdstatp->sense_hdr.sense_key == NO_SENSE || 745 cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR) && 746 (!cmdstatp->remainder_valid || 747 cmdstatp->uremainder64 == 0)) { /* All written at EOM early warning */ 748 STp->dirty = 0; 749 (STp->buffer)->buffer_bytes = 0; 750 if (STps->drv_block >= 0) 751 STps->drv_block += blks; 752 result = (-ENOSPC); 753 } else { 754 st_printk(KERN_ERR, STp, "Error on flush.\n"); 755 STps->drv_block = (-1); 756 result = (-EIO); 757 } 758 } else { 759 if (STps->drv_block >= 0) 760 STps->drv_block += blks; 761 STp->dirty = 0; 762 (STp->buffer)->buffer_bytes = 0; 763 } 764 st_release_request(SRpnt); 765 SRpnt = NULL; 766 } 767 return result; 768 } 769 770 771 /* Flush the tape buffer. The tape will be positioned correctly unless 772 seek_next is true. */ 773 static int flush_buffer(struct scsi_tape *STp, int seek_next) 774 { 775 int backspace, result; 776 struct st_buffer *STbuffer; 777 struct st_partstat *STps; 778 779 STbuffer = STp->buffer; 780 781 /* 782 * If there was a bus reset, block further access 783 * to this device. 784 */ 785 if (STp->pos_unknown) 786 return (-EIO); 787 788 if (STp->ready != ST_READY) 789 return 0; 790 STps = &(STp->ps[STp->partition]); 791 if (STps->rw == ST_WRITING) /* Writing */ 792 return st_flush_write_buffer(STp); 793 794 if (STp->block_size == 0) 795 return 0; 796 797 backspace = ((STp->buffer)->buffer_bytes + 798 (STp->buffer)->read_pointer) / STp->block_size - 799 ((STp->buffer)->read_pointer + STp->block_size - 1) / 800 STp->block_size; 801 (STp->buffer)->buffer_bytes = 0; 802 (STp->buffer)->read_pointer = 0; 803 result = 0; 804 if (!seek_next) { 805 if (STps->eof == ST_FM_HIT) { 806 result = cross_eof(STp, 0); /* Back over the EOF hit */ 807 if (!result) 808 STps->eof = ST_NOEOF; 809 else { 810 if (STps->drv_file >= 0) 811 STps->drv_file++; 812 STps->drv_block = 0; 813 } 814 } 815 if (!result && backspace > 0) 816 result = st_int_ioctl(STp, MTBSR, backspace); 817 } else if (STps->eof == ST_FM_HIT) { 818 if (STps->drv_file >= 0) 819 STps->drv_file++; 820 STps->drv_block = 0; 821 STps->eof = ST_NOEOF; 822 } 823 return result; 824 825 } 826 827 /* Set the mode parameters */ 828 static int set_mode_densblk(struct scsi_tape * STp, struct st_modedef * STm) 829 { 830 int set_it = 0; 831 unsigned long arg; 832 833 if (!STp->density_changed && 834 STm->default_density >= 0 && 835 STm->default_density != STp->density) { 836 arg = STm->default_density; 837 set_it = 1; 838 } else 839 arg = STp->density; 840 arg <<= MT_ST_DENSITY_SHIFT; 841 if (!STp->blksize_changed && 842 STm->default_blksize >= 0 && 843 STm->default_blksize != STp->block_size) { 844 arg |= STm->default_blksize; 845 set_it = 1; 846 } else 847 arg |= STp->block_size; 848 if (set_it && 849 st_int_ioctl(STp, SET_DENS_AND_BLK, arg)) { 850 st_printk(KERN_WARNING, STp, 851 "Can't set default block size to %d bytes " 852 "and density %x.\n", 853 STm->default_blksize, STm->default_density); 854 if (modes_defined) 855 return (-EINVAL); 856 } 857 return 0; 858 } 859 860 861 /* Lock or unlock the drive door. Don't use when st_request allocated. */ 862 static int do_door_lock(struct scsi_tape * STp, int do_lock) 863 { 864 int retval; 865 866 DEBC_printk(STp, "%socking drive door.\n", do_lock ? "L" : "Unl"); 867 868 retval = scsi_set_medium_removal(STp->device, 869 do_lock ? SCSI_REMOVAL_PREVENT : SCSI_REMOVAL_ALLOW); 870 if (!retval) 871 STp->door_locked = do_lock ? ST_LOCKED_EXPLICIT : ST_UNLOCKED; 872 else 873 STp->door_locked = ST_LOCK_FAILS; 874 return retval; 875 } 876 877 878 /* Set the internal state after reset */ 879 static void reset_state(struct scsi_tape *STp) 880 { 881 int i; 882 struct st_partstat *STps; 883 884 STp->pos_unknown = 0; 885 for (i = 0; i < ST_NBR_PARTITIONS; i++) { 886 STps = &(STp->ps[i]); 887 STps->rw = ST_IDLE; 888 STps->eof = ST_NOEOF; 889 STps->at_sm = 0; 890 STps->last_block_valid = 0; 891 STps->drv_block = -1; 892 STps->drv_file = -1; 893 } 894 if (STp->can_partitions) { 895 STp->partition = find_partition(STp); 896 if (STp->partition < 0) 897 STp->partition = 0; 898 STp->new_partition = STp->partition; 899 } 900 } 901 902 /* Test if the drive is ready. Returns either one of the codes below or a negative system 903 error code. */ 904 #define CHKRES_READY 0 905 #define CHKRES_NEW_SESSION 1 906 #define CHKRES_NOT_READY 2 907 #define CHKRES_NO_TAPE 3 908 909 #define MAX_ATTENTIONS 10 910 911 static int test_ready(struct scsi_tape *STp, int do_wait) 912 { 913 int attentions, waits, max_wait, scode; 914 int retval = CHKRES_READY, new_session = 0; 915 unsigned char cmd[MAX_COMMAND_SIZE]; 916 struct st_request *SRpnt = NULL; 917 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat; 918 919 max_wait = do_wait ? ST_BLOCK_SECONDS : 0; 920 921 for (attentions=waits=0; ; ) { 922 memset((void *) &cmd[0], 0, MAX_COMMAND_SIZE); 923 cmd[0] = TEST_UNIT_READY; 924 SRpnt = st_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE, 925 STp->long_timeout, MAX_READY_RETRIES, 1); 926 927 if (!SRpnt) { 928 retval = (STp->buffer)->syscall_result; 929 break; 930 } 931 932 if (cmdstatp->have_sense) { 933 934 scode = cmdstatp->sense_hdr.sense_key; 935 936 if (scode == UNIT_ATTENTION) { /* New media? */ 937 new_session = 1; 938 if (attentions < MAX_ATTENTIONS) { 939 attentions++; 940 continue; 941 } 942 else { 943 retval = (-EIO); 944 break; 945 } 946 } 947 948 if (scode == NOT_READY) { 949 if (waits < max_wait) { 950 if (msleep_interruptible(1000)) { 951 retval = (-EINTR); 952 break; 953 } 954 waits++; 955 continue; 956 } 957 else { 958 if ((STp->device)->scsi_level >= SCSI_2 && 959 cmdstatp->sense_hdr.asc == 0x3a) /* Check ASC */ 960 retval = CHKRES_NO_TAPE; 961 else 962 retval = CHKRES_NOT_READY; 963 break; 964 } 965 } 966 } 967 968 retval = (STp->buffer)->syscall_result; 969 if (!retval) 970 retval = new_session ? CHKRES_NEW_SESSION : CHKRES_READY; 971 break; 972 } 973 974 if (SRpnt != NULL) 975 st_release_request(SRpnt); 976 return retval; 977 } 978 979 980 /* See if the drive is ready and gather information about the tape. Return values: 981 < 0 negative error code from errno.h 982 0 drive ready 983 1 drive not ready (possibly no tape) 984 */ 985 static int check_tape(struct scsi_tape *STp, struct file *filp) 986 { 987 int i, retval, new_session = 0, do_wait; 988 unsigned char cmd[MAX_COMMAND_SIZE], saved_cleaning; 989 unsigned short st_flags = filp->f_flags; 990 struct st_request *SRpnt = NULL; 991 struct st_modedef *STm; 992 struct st_partstat *STps; 993 struct inode *inode = file_inode(filp); 994 int mode = TAPE_MODE(inode); 995 996 STp->ready = ST_READY; 997 998 if (mode != STp->current_mode) { 999 DEBC_printk(STp, "Mode change from %d to %d.\n", 1000 STp->current_mode, mode); 1001 new_session = 1; 1002 STp->current_mode = mode; 1003 } 1004 STm = &(STp->modes[STp->current_mode]); 1005 1006 saved_cleaning = STp->cleaning_req; 1007 STp->cleaning_req = 0; 1008 1009 do_wait = ((filp->f_flags & O_NONBLOCK) == 0); 1010 retval = test_ready(STp, do_wait); 1011 1012 if (retval < 0) 1013 goto err_out; 1014 1015 if (retval == CHKRES_NEW_SESSION) { 1016 STp->pos_unknown = 0; 1017 STp->partition = STp->new_partition = 0; 1018 if (STp->can_partitions) 1019 STp->nbr_partitions = 1; /* This guess will be updated later 1020 if necessary */ 1021 for (i = 0; i < ST_NBR_PARTITIONS; i++) { 1022 STps = &(STp->ps[i]); 1023 STps->rw = ST_IDLE; 1024 STps->eof = ST_NOEOF; 1025 STps->at_sm = 0; 1026 STps->last_block_valid = 0; 1027 STps->drv_block = 0; 1028 STps->drv_file = 0; 1029 } 1030 new_session = 1; 1031 } 1032 else { 1033 STp->cleaning_req |= saved_cleaning; 1034 1035 if (retval == CHKRES_NOT_READY || retval == CHKRES_NO_TAPE) { 1036 if (retval == CHKRES_NO_TAPE) 1037 STp->ready = ST_NO_TAPE; 1038 else 1039 STp->ready = ST_NOT_READY; 1040 1041 STp->density = 0; /* Clear the erroneous "residue" */ 1042 STp->write_prot = 0; 1043 STp->block_size = 0; 1044 STp->ps[0].drv_file = STp->ps[0].drv_block = (-1); 1045 STp->partition = STp->new_partition = 0; 1046 STp->door_locked = ST_UNLOCKED; 1047 return CHKRES_NOT_READY; 1048 } 1049 } 1050 1051 if (STp->omit_blklims) 1052 STp->min_block = STp->max_block = (-1); 1053 else { 1054 memset((void *) &cmd[0], 0, MAX_COMMAND_SIZE); 1055 cmd[0] = READ_BLOCK_LIMITS; 1056 1057 SRpnt = st_do_scsi(SRpnt, STp, cmd, 6, DMA_FROM_DEVICE, 1058 STp->device->request_queue->rq_timeout, 1059 MAX_READY_RETRIES, 1); 1060 if (!SRpnt) { 1061 retval = (STp->buffer)->syscall_result; 1062 goto err_out; 1063 } 1064 1065 if (!SRpnt->result && !STp->buffer->cmdstat.have_sense) { 1066 STp->max_block = ((STp->buffer)->b_data[1] << 16) | 1067 ((STp->buffer)->b_data[2] << 8) | (STp->buffer)->b_data[3]; 1068 STp->min_block = ((STp->buffer)->b_data[4] << 8) | 1069 (STp->buffer)->b_data[5]; 1070 if ( DEB( debugging || ) !STp->inited) 1071 st_printk(KERN_INFO, STp, 1072 "Block limits %d - %d bytes.\n", 1073 STp->min_block, STp->max_block); 1074 } else { 1075 STp->min_block = STp->max_block = (-1); 1076 DEBC_printk(STp, "Can't read block limits.\n"); 1077 } 1078 } 1079 1080 memset((void *) &cmd[0], 0, MAX_COMMAND_SIZE); 1081 cmd[0] = MODE_SENSE; 1082 cmd[4] = 12; 1083 1084 SRpnt = st_do_scsi(SRpnt, STp, cmd, 12, DMA_FROM_DEVICE, 1085 STp->device->request_queue->rq_timeout, 1086 MAX_READY_RETRIES, 1); 1087 if (!SRpnt) { 1088 retval = (STp->buffer)->syscall_result; 1089 goto err_out; 1090 } 1091 1092 if ((STp->buffer)->syscall_result != 0) { 1093 DEBC_printk(STp, "No Mode Sense.\n"); 1094 STp->block_size = ST_DEFAULT_BLOCK; /* Educated guess (?) */ 1095 (STp->buffer)->syscall_result = 0; /* Prevent error propagation */ 1096 STp->drv_write_prot = 0; 1097 } else { 1098 DEBC_printk(STp,"Mode sense. Length %d, " 1099 "medium %x, WBS %x, BLL %d\n", 1100 (STp->buffer)->b_data[0], 1101 (STp->buffer)->b_data[1], 1102 (STp->buffer)->b_data[2], 1103 (STp->buffer)->b_data[3]); 1104 1105 if ((STp->buffer)->b_data[3] >= 8) { 1106 STp->drv_buffer = ((STp->buffer)->b_data[2] >> 4) & 7; 1107 STp->density = (STp->buffer)->b_data[4]; 1108 STp->block_size = (STp->buffer)->b_data[9] * 65536 + 1109 (STp->buffer)->b_data[10] * 256 + (STp->buffer)->b_data[11]; 1110 DEBC_printk(STp, "Density %x, tape length: %x, " 1111 "drv buffer: %d\n", 1112 STp->density, 1113 (STp->buffer)->b_data[5] * 65536 + 1114 (STp->buffer)->b_data[6] * 256 + 1115 (STp->buffer)->b_data[7], 1116 STp->drv_buffer); 1117 } 1118 STp->drv_write_prot = ((STp->buffer)->b_data[2] & 0x80) != 0; 1119 if (!STp->drv_buffer && STp->immediate_filemark) { 1120 st_printk(KERN_WARNING, STp, 1121 "non-buffered tape: disabling " 1122 "writing immediate filemarks\n"); 1123 STp->immediate_filemark = 0; 1124 } 1125 } 1126 st_release_request(SRpnt); 1127 SRpnt = NULL; 1128 STp->inited = 1; 1129 1130 if (STp->block_size > 0) 1131 (STp->buffer)->buffer_blocks = 1132 (STp->buffer)->buffer_size / STp->block_size; 1133 else 1134 (STp->buffer)->buffer_blocks = 1; 1135 (STp->buffer)->buffer_bytes = (STp->buffer)->read_pointer = 0; 1136 1137 DEBC_printk(STp, "Block size: %d, buffer size: %d (%d blocks).\n", 1138 STp->block_size, (STp->buffer)->buffer_size, 1139 (STp->buffer)->buffer_blocks); 1140 1141 if (STp->drv_write_prot) { 1142 STp->write_prot = 1; 1143 1144 DEBC_printk(STp, "Write protected\n"); 1145 1146 if (do_wait && 1147 ((st_flags & O_ACCMODE) == O_WRONLY || 1148 (st_flags & O_ACCMODE) == O_RDWR)) { 1149 retval = (-EROFS); 1150 goto err_out; 1151 } 1152 } 1153 1154 if (STp->can_partitions && STp->nbr_partitions < 1) { 1155 /* This code is reached when the device is opened for the first time 1156 after the driver has been initialized with tape in the drive and the 1157 partition support has been enabled. */ 1158 DEBC_printk(STp, "Updating partition number in status.\n"); 1159 if ((STp->partition = find_partition(STp)) < 0) { 1160 retval = STp->partition; 1161 goto err_out; 1162 } 1163 STp->new_partition = STp->partition; 1164 STp->nbr_partitions = 1; /* This guess will be updated when necessary */ 1165 } 1166 1167 if (new_session) { /* Change the drive parameters for the new mode */ 1168 STp->density_changed = STp->blksize_changed = 0; 1169 STp->compression_changed = 0; 1170 if (!(STm->defaults_for_writes) && 1171 (retval = set_mode_densblk(STp, STm)) < 0) 1172 goto err_out; 1173 1174 if (STp->default_drvbuffer != 0xff) { 1175 if (st_int_ioctl(STp, MTSETDRVBUFFER, STp->default_drvbuffer)) 1176 st_printk(KERN_WARNING, STp, 1177 "Can't set default drive " 1178 "buffering to %d.\n", 1179 STp->default_drvbuffer); 1180 } 1181 } 1182 1183 return CHKRES_READY; 1184 1185 err_out: 1186 return retval; 1187 } 1188 1189 1190 /* Open the device. Needs to take the BKL only because of incrementing the SCSI host 1191 module count. */ 1192 static int st_open(struct inode *inode, struct file *filp) 1193 { 1194 int i, retval = (-EIO); 1195 int resumed = 0; 1196 struct scsi_tape *STp; 1197 struct st_partstat *STps; 1198 int dev = TAPE_NR(inode); 1199 1200 /* 1201 * We really want to do nonseekable_open(inode, filp); here, but some 1202 * versions of tar incorrectly call lseek on tapes and bail out if that 1203 * fails. So we disallow pread() and pwrite(), but permit lseeks. 1204 */ 1205 filp->f_mode &= ~(FMODE_PREAD | FMODE_PWRITE); 1206 1207 if (!(STp = scsi_tape_get(dev))) { 1208 return -ENXIO; 1209 } 1210 1211 filp->private_data = STp; 1212 1213 spin_lock(&st_use_lock); 1214 if (STp->in_use) { 1215 spin_unlock(&st_use_lock); 1216 scsi_tape_put(STp); 1217 DEBC_printk(STp, "Device already in use.\n"); 1218 return (-EBUSY); 1219 } 1220 1221 STp->in_use = 1; 1222 spin_unlock(&st_use_lock); 1223 STp->rew_at_close = STp->autorew_dev = (iminor(inode) & 0x80) == 0; 1224 1225 if (scsi_autopm_get_device(STp->device) < 0) { 1226 retval = -EIO; 1227 goto err_out; 1228 } 1229 resumed = 1; 1230 if (!scsi_block_when_processing_errors(STp->device)) { 1231 retval = (-ENXIO); 1232 goto err_out; 1233 } 1234 1235 /* See that we have at least a one page buffer available */ 1236 if (!enlarge_buffer(STp->buffer, PAGE_SIZE, STp->restr_dma)) { 1237 st_printk(KERN_WARNING, STp, 1238 "Can't allocate one page tape buffer.\n"); 1239 retval = (-EOVERFLOW); 1240 goto err_out; 1241 } 1242 1243 (STp->buffer)->cleared = 0; 1244 (STp->buffer)->writing = 0; 1245 (STp->buffer)->syscall_result = 0; 1246 1247 STp->write_prot = ((filp->f_flags & O_ACCMODE) == O_RDONLY); 1248 1249 STp->dirty = 0; 1250 for (i = 0; i < ST_NBR_PARTITIONS; i++) { 1251 STps = &(STp->ps[i]); 1252 STps->rw = ST_IDLE; 1253 } 1254 STp->try_dio_now = STp->try_dio; 1255 STp->recover_count = 0; 1256 DEB( STp->nbr_waits = STp->nbr_finished = 0; 1257 STp->nbr_requests = STp->nbr_dio = STp->nbr_pages = 0; ) 1258 1259 retval = check_tape(STp, filp); 1260 if (retval < 0) 1261 goto err_out; 1262 if ((filp->f_flags & O_NONBLOCK) == 0 && 1263 retval != CHKRES_READY) { 1264 if (STp->ready == NO_TAPE) 1265 retval = (-ENOMEDIUM); 1266 else 1267 retval = (-EIO); 1268 goto err_out; 1269 } 1270 return 0; 1271 1272 err_out: 1273 normalize_buffer(STp->buffer); 1274 spin_lock(&st_use_lock); 1275 STp->in_use = 0; 1276 spin_unlock(&st_use_lock); 1277 scsi_tape_put(STp); 1278 if (resumed) 1279 scsi_autopm_put_device(STp->device); 1280 return retval; 1281 1282 } 1283 1284 1285 /* Flush the tape buffer before close */ 1286 static int st_flush(struct file *filp, fl_owner_t id) 1287 { 1288 int result = 0, result2; 1289 unsigned char cmd[MAX_COMMAND_SIZE]; 1290 struct st_request *SRpnt; 1291 struct scsi_tape *STp = filp->private_data; 1292 struct st_modedef *STm = &(STp->modes[STp->current_mode]); 1293 struct st_partstat *STps = &(STp->ps[STp->partition]); 1294 1295 if (file_count(filp) > 1) 1296 return 0; 1297 1298 if (STps->rw == ST_WRITING && !STp->pos_unknown) { 1299 result = st_flush_write_buffer(STp); 1300 if (result != 0 && result != (-ENOSPC)) 1301 goto out; 1302 } 1303 1304 if (STp->can_partitions && 1305 (result2 = switch_partition(STp)) < 0) { 1306 DEBC_printk(STp, "switch_partition at close failed.\n"); 1307 if (result == 0) 1308 result = result2; 1309 goto out; 1310 } 1311 1312 DEBC( if (STp->nbr_requests) 1313 st_printk(KERN_DEBUG, STp, 1314 "Number of r/w requests %d, dio used in %d, " 1315 "pages %d.\n", STp->nbr_requests, STp->nbr_dio, 1316 STp->nbr_pages)); 1317 1318 if (STps->rw == ST_WRITING && !STp->pos_unknown) { 1319 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat; 1320 1321 #if DEBUG 1322 DEBC_printk(STp, "Async write waits %d, finished %d.\n", 1323 STp->nbr_waits, STp->nbr_finished); 1324 #endif 1325 memset(cmd, 0, MAX_COMMAND_SIZE); 1326 cmd[0] = WRITE_FILEMARKS; 1327 if (STp->immediate_filemark) 1328 cmd[1] = 1; 1329 cmd[4] = 1 + STp->two_fm; 1330 1331 SRpnt = st_do_scsi(NULL, STp, cmd, 0, DMA_NONE, 1332 STp->device->request_queue->rq_timeout, 1333 MAX_WRITE_RETRIES, 1); 1334 if (!SRpnt) { 1335 result = (STp->buffer)->syscall_result; 1336 goto out; 1337 } 1338 1339 if (STp->buffer->syscall_result == 0 || 1340 (cmdstatp->have_sense && !cmdstatp->deferred && 1341 (cmdstatp->flags & SENSE_EOM) && 1342 (cmdstatp->sense_hdr.sense_key == NO_SENSE || 1343 cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR) && 1344 (!cmdstatp->remainder_valid || cmdstatp->uremainder64 == 0))) { 1345 /* Write successful at EOM */ 1346 st_release_request(SRpnt); 1347 SRpnt = NULL; 1348 if (STps->drv_file >= 0) 1349 STps->drv_file++; 1350 STps->drv_block = 0; 1351 if (STp->two_fm) 1352 cross_eof(STp, 0); 1353 STps->eof = ST_FM; 1354 } 1355 else { /* Write error */ 1356 st_release_request(SRpnt); 1357 SRpnt = NULL; 1358 st_printk(KERN_ERR, STp, 1359 "Error on write filemark.\n"); 1360 if (result == 0) 1361 result = (-EIO); 1362 } 1363 1364 DEBC_printk(STp, "Buffer flushed, %d EOF(s) written\n", cmd[4]); 1365 } else if (!STp->rew_at_close) { 1366 STps = &(STp->ps[STp->partition]); 1367 if (!STm->sysv || STps->rw != ST_READING) { 1368 if (STp->can_bsr) 1369 result = flush_buffer(STp, 0); 1370 else if (STps->eof == ST_FM_HIT) { 1371 result = cross_eof(STp, 0); 1372 if (result) { 1373 if (STps->drv_file >= 0) 1374 STps->drv_file++; 1375 STps->drv_block = 0; 1376 STps->eof = ST_FM; 1377 } else 1378 STps->eof = ST_NOEOF; 1379 } 1380 } else if ((STps->eof == ST_NOEOF && 1381 !(result = cross_eof(STp, 1))) || 1382 STps->eof == ST_FM_HIT) { 1383 if (STps->drv_file >= 0) 1384 STps->drv_file++; 1385 STps->drv_block = 0; 1386 STps->eof = ST_FM; 1387 } 1388 } 1389 1390 out: 1391 if (STp->rew_at_close) { 1392 result2 = st_int_ioctl(STp, MTREW, 1); 1393 if (result == 0) 1394 result = result2; 1395 } 1396 return result; 1397 } 1398 1399 1400 /* Close the device and release it. BKL is not needed: this is the only thread 1401 accessing this tape. */ 1402 static int st_release(struct inode *inode, struct file *filp) 1403 { 1404 int result = 0; 1405 struct scsi_tape *STp = filp->private_data; 1406 1407 if (STp->door_locked == ST_LOCKED_AUTO) 1408 do_door_lock(STp, 0); 1409 1410 normalize_buffer(STp->buffer); 1411 spin_lock(&st_use_lock); 1412 STp->in_use = 0; 1413 spin_unlock(&st_use_lock); 1414 scsi_autopm_put_device(STp->device); 1415 scsi_tape_put(STp); 1416 1417 return result; 1418 } 1419 1420 /* The checks common to both reading and writing */ 1421 static ssize_t rw_checks(struct scsi_tape *STp, struct file *filp, size_t count) 1422 { 1423 ssize_t retval = 0; 1424 1425 /* 1426 * If we are in the middle of error recovery, don't let anyone 1427 * else try and use this device. Also, if error recovery fails, it 1428 * may try and take the device offline, in which case all further 1429 * access to the device is prohibited. 1430 */ 1431 if (!scsi_block_when_processing_errors(STp->device)) { 1432 retval = (-ENXIO); 1433 goto out; 1434 } 1435 1436 if (STp->ready != ST_READY) { 1437 if (STp->ready == ST_NO_TAPE) 1438 retval = (-ENOMEDIUM); 1439 else 1440 retval = (-EIO); 1441 goto out; 1442 } 1443 1444 if (! STp->modes[STp->current_mode].defined) { 1445 retval = (-ENXIO); 1446 goto out; 1447 } 1448 1449 1450 /* 1451 * If there was a bus reset, block further access 1452 * to this device. 1453 */ 1454 if (STp->pos_unknown) { 1455 retval = (-EIO); 1456 goto out; 1457 } 1458 1459 if (count == 0) 1460 goto out; 1461 1462 DEB( 1463 if (!STp->in_use) { 1464 st_printk(ST_DEB_MSG, STp, 1465 "Incorrect device.\n"); 1466 retval = (-EIO); 1467 goto out; 1468 } ) /* end DEB */ 1469 1470 if (STp->can_partitions && 1471 (retval = switch_partition(STp)) < 0) 1472 goto out; 1473 1474 if (STp->block_size == 0 && STp->max_block > 0 && 1475 (count < STp->min_block || count > STp->max_block)) { 1476 retval = (-EINVAL); 1477 goto out; 1478 } 1479 1480 if (STp->do_auto_lock && STp->door_locked == ST_UNLOCKED && 1481 !do_door_lock(STp, 1)) 1482 STp->door_locked = ST_LOCKED_AUTO; 1483 1484 out: 1485 return retval; 1486 } 1487 1488 1489 static int setup_buffering(struct scsi_tape *STp, const char __user *buf, 1490 size_t count, int is_read) 1491 { 1492 int i, bufsize, retval = 0; 1493 struct st_buffer *STbp = STp->buffer; 1494 1495 if (is_read) 1496 i = STp->try_dio_now && try_rdio; 1497 else 1498 i = STp->try_dio_now && try_wdio; 1499 1500 if (i && ((unsigned long)buf & queue_dma_alignment( 1501 STp->device->request_queue)) == 0) { 1502 i = sgl_map_user_pages(STbp, STbp->use_sg, (unsigned long)buf, 1503 count, (is_read ? READ : WRITE)); 1504 if (i > 0) { 1505 STbp->do_dio = i; 1506 STbp->buffer_bytes = 0; /* can be used as transfer counter */ 1507 } 1508 else 1509 STbp->do_dio = 0; /* fall back to buffering with any error */ 1510 STbp->sg_segs = STbp->do_dio; 1511 DEB( 1512 if (STbp->do_dio) { 1513 STp->nbr_dio++; 1514 STp->nbr_pages += STbp->do_dio; 1515 } 1516 ) 1517 } else 1518 STbp->do_dio = 0; 1519 DEB( STp->nbr_requests++; ) 1520 1521 if (!STbp->do_dio) { 1522 if (STp->block_size) 1523 bufsize = STp->block_size > st_fixed_buffer_size ? 1524 STp->block_size : st_fixed_buffer_size; 1525 else { 1526 bufsize = count; 1527 /* Make sure that data from previous user is not leaked even if 1528 HBA does not return correct residual */ 1529 if (is_read && STp->sili && !STbp->cleared) 1530 clear_buffer(STbp); 1531 } 1532 1533 if (bufsize > STbp->buffer_size && 1534 !enlarge_buffer(STbp, bufsize, STp->restr_dma)) { 1535 st_printk(KERN_WARNING, STp, 1536 "Can't allocate %d byte tape buffer.\n", 1537 bufsize); 1538 retval = (-EOVERFLOW); 1539 goto out; 1540 } 1541 if (STp->block_size) 1542 STbp->buffer_blocks = bufsize / STp->block_size; 1543 } 1544 1545 out: 1546 return retval; 1547 } 1548 1549 1550 /* Can be called more than once after each setup_buffer() */ 1551 static void release_buffering(struct scsi_tape *STp, int is_read) 1552 { 1553 struct st_buffer *STbp; 1554 1555 STbp = STp->buffer; 1556 if (STbp->do_dio) { 1557 sgl_unmap_user_pages(STbp, STbp->do_dio, is_read); 1558 STbp->do_dio = 0; 1559 STbp->sg_segs = 0; 1560 } 1561 } 1562 1563 1564 /* Write command */ 1565 static ssize_t 1566 st_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos) 1567 { 1568 ssize_t total; 1569 ssize_t i, do_count, blks, transfer; 1570 ssize_t retval; 1571 int undone, retry_eot = 0, scode; 1572 int async_write; 1573 unsigned char cmd[MAX_COMMAND_SIZE]; 1574 const char __user *b_point; 1575 struct st_request *SRpnt = NULL; 1576 struct scsi_tape *STp = filp->private_data; 1577 struct st_modedef *STm; 1578 struct st_partstat *STps; 1579 struct st_buffer *STbp; 1580 1581 if (mutex_lock_interruptible(&STp->lock)) 1582 return -ERESTARTSYS; 1583 1584 retval = rw_checks(STp, filp, count); 1585 if (retval || count == 0) 1586 goto out; 1587 1588 /* Write must be integral number of blocks */ 1589 if (STp->block_size != 0 && (count % STp->block_size) != 0) { 1590 st_printk(KERN_WARNING, STp, 1591 "Write not multiple of tape block size.\n"); 1592 retval = (-EINVAL); 1593 goto out; 1594 } 1595 1596 STm = &(STp->modes[STp->current_mode]); 1597 STps = &(STp->ps[STp->partition]); 1598 1599 if (STp->write_prot) { 1600 retval = (-EACCES); 1601 goto out; 1602 } 1603 1604 1605 if (STps->rw == ST_READING) { 1606 retval = flush_buffer(STp, 0); 1607 if (retval) 1608 goto out; 1609 STps->rw = ST_WRITING; 1610 } else if (STps->rw != ST_WRITING && 1611 STps->drv_file == 0 && STps->drv_block == 0) { 1612 if ((retval = set_mode_densblk(STp, STm)) < 0) 1613 goto out; 1614 if (STm->default_compression != ST_DONT_TOUCH && 1615 !(STp->compression_changed)) { 1616 if (st_compression(STp, (STm->default_compression == ST_YES))) { 1617 st_printk(KERN_WARNING, STp, 1618 "Can't set default compression.\n"); 1619 if (modes_defined) { 1620 retval = (-EINVAL); 1621 goto out; 1622 } 1623 } 1624 } 1625 } 1626 1627 STbp = STp->buffer; 1628 i = write_behind_check(STp); 1629 if (i) { 1630 if (i == -ENOSPC) 1631 STps->eof = ST_EOM_OK; 1632 else 1633 STps->eof = ST_EOM_ERROR; 1634 } 1635 1636 if (STps->eof == ST_EOM_OK) { 1637 STps->eof = ST_EOD_1; /* allow next write */ 1638 retval = (-ENOSPC); 1639 goto out; 1640 } 1641 else if (STps->eof == ST_EOM_ERROR) { 1642 retval = (-EIO); 1643 goto out; 1644 } 1645 1646 /* Check the buffer readability in cases where copy_user might catch 1647 the problems after some tape movement. */ 1648 if (STp->block_size != 0 && 1649 !STbp->do_dio && 1650 (copy_from_user(&i, buf, 1) != 0 || 1651 copy_from_user(&i, buf + count - 1, 1) != 0)) { 1652 retval = (-EFAULT); 1653 goto out; 1654 } 1655 1656 retval = setup_buffering(STp, buf, count, 0); 1657 if (retval) 1658 goto out; 1659 1660 total = count; 1661 1662 memset(cmd, 0, MAX_COMMAND_SIZE); 1663 cmd[0] = WRITE_6; 1664 cmd[1] = (STp->block_size != 0); 1665 1666 STps->rw = ST_WRITING; 1667 1668 b_point = buf; 1669 while (count > 0 && !retry_eot) { 1670 1671 if (STbp->do_dio) { 1672 do_count = count; 1673 } 1674 else { 1675 if (STp->block_size == 0) 1676 do_count = count; 1677 else { 1678 do_count = STbp->buffer_blocks * STp->block_size - 1679 STbp->buffer_bytes; 1680 if (do_count > count) 1681 do_count = count; 1682 } 1683 1684 i = append_to_buffer(b_point, STbp, do_count); 1685 if (i) { 1686 retval = i; 1687 goto out; 1688 } 1689 } 1690 count -= do_count; 1691 b_point += do_count; 1692 1693 async_write = STp->block_size == 0 && !STbp->do_dio && 1694 STm->do_async_writes && STps->eof < ST_EOM_OK; 1695 1696 if (STp->block_size != 0 && STm->do_buffer_writes && 1697 !(STp->try_dio_now && try_wdio) && STps->eof < ST_EOM_OK && 1698 STbp->buffer_bytes < STbp->buffer_size) { 1699 STp->dirty = 1; 1700 /* Don't write a buffer that is not full enough. */ 1701 if (!async_write && count == 0) 1702 break; 1703 } 1704 1705 retry_write: 1706 if (STp->block_size == 0) 1707 blks = transfer = do_count; 1708 else { 1709 if (!STbp->do_dio) 1710 blks = STbp->buffer_bytes; 1711 else 1712 blks = do_count; 1713 blks /= STp->block_size; 1714 transfer = blks * STp->block_size; 1715 } 1716 cmd[2] = blks >> 16; 1717 cmd[3] = blks >> 8; 1718 cmd[4] = blks; 1719 1720 SRpnt = st_do_scsi(SRpnt, STp, cmd, transfer, DMA_TO_DEVICE, 1721 STp->device->request_queue->rq_timeout, 1722 MAX_WRITE_RETRIES, !async_write); 1723 if (!SRpnt) { 1724 retval = STbp->syscall_result; 1725 goto out; 1726 } 1727 if (async_write && !STbp->syscall_result) { 1728 STbp->writing = transfer; 1729 STp->dirty = !(STbp->writing == 1730 STbp->buffer_bytes); 1731 SRpnt = NULL; /* Prevent releasing this request! */ 1732 DEB( STp->write_pending = 1; ) 1733 break; 1734 } 1735 1736 if (STbp->syscall_result != 0) { 1737 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat; 1738 1739 DEBC_printk(STp, "Error on write:\n"); 1740 if (cmdstatp->have_sense && (cmdstatp->flags & SENSE_EOM)) { 1741 scode = cmdstatp->sense_hdr.sense_key; 1742 if (cmdstatp->remainder_valid) 1743 undone = (int)cmdstatp->uremainder64; 1744 else if (STp->block_size == 0 && 1745 scode == VOLUME_OVERFLOW) 1746 undone = transfer; 1747 else 1748 undone = 0; 1749 if (STp->block_size != 0) 1750 undone *= STp->block_size; 1751 if (undone <= do_count) { 1752 /* Only data from this write is not written */ 1753 count += undone; 1754 b_point -= undone; 1755 do_count -= undone; 1756 if (STp->block_size) 1757 blks = (transfer - undone) / STp->block_size; 1758 STps->eof = ST_EOM_OK; 1759 /* Continue in fixed block mode if all written 1760 in this request but still something left to write 1761 (retval left to zero) 1762 */ 1763 if (STp->block_size == 0 || 1764 undone > 0 || count == 0) 1765 retval = (-ENOSPC); /* EOM within current request */ 1766 DEBC_printk(STp, "EOM with %d " 1767 "bytes unwritten.\n", 1768 (int)count); 1769 } else { 1770 /* EOT within data buffered earlier (possible only 1771 in fixed block mode without direct i/o) */ 1772 if (!retry_eot && !cmdstatp->deferred && 1773 (scode == NO_SENSE || scode == RECOVERED_ERROR)) { 1774 move_buffer_data(STp->buffer, transfer - undone); 1775 retry_eot = 1; 1776 if (STps->drv_block >= 0) { 1777 STps->drv_block += (transfer - undone) / 1778 STp->block_size; 1779 } 1780 STps->eof = ST_EOM_OK; 1781 DEBC_printk(STp, "Retry " 1782 "write of %d " 1783 "bytes at EOM.\n", 1784 STp->buffer->buffer_bytes); 1785 goto retry_write; 1786 } 1787 else { 1788 /* Either error within data buffered by driver or 1789 failed retry */ 1790 count -= do_count; 1791 blks = do_count = 0; 1792 STps->eof = ST_EOM_ERROR; 1793 STps->drv_block = (-1); /* Too cautious? */ 1794 retval = (-EIO); /* EOM for old data */ 1795 DEBC_printk(STp, "EOM with " 1796 "lost data.\n"); 1797 } 1798 } 1799 } else { 1800 count += do_count; 1801 STps->drv_block = (-1); /* Too cautious? */ 1802 retval = STbp->syscall_result; 1803 } 1804 1805 } 1806 1807 if (STps->drv_block >= 0) { 1808 if (STp->block_size == 0) 1809 STps->drv_block += (do_count > 0); 1810 else 1811 STps->drv_block += blks; 1812 } 1813 1814 STbp->buffer_bytes = 0; 1815 STp->dirty = 0; 1816 1817 if (retval || retry_eot) { 1818 if (count < total) 1819 retval = total - count; 1820 goto out; 1821 } 1822 } 1823 1824 if (STps->eof == ST_EOD_1) 1825 STps->eof = ST_EOM_OK; 1826 else if (STps->eof != ST_EOM_OK) 1827 STps->eof = ST_NOEOF; 1828 retval = total - count; 1829 1830 out: 1831 if (SRpnt != NULL) 1832 st_release_request(SRpnt); 1833 release_buffering(STp, 0); 1834 mutex_unlock(&STp->lock); 1835 1836 return retval; 1837 } 1838 1839 /* Read data from the tape. Returns zero in the normal case, one if the 1840 eof status has changed, and the negative error code in case of a 1841 fatal error. Otherwise updates the buffer and the eof state. 1842 1843 Does release user buffer mapping if it is set. 1844 */ 1845 static long read_tape(struct scsi_tape *STp, long count, 1846 struct st_request ** aSRpnt) 1847 { 1848 int transfer, blks, bytes; 1849 unsigned char cmd[MAX_COMMAND_SIZE]; 1850 struct st_request *SRpnt; 1851 struct st_modedef *STm; 1852 struct st_partstat *STps; 1853 struct st_buffer *STbp; 1854 int retval = 0; 1855 1856 if (count == 0) 1857 return 0; 1858 1859 STm = &(STp->modes[STp->current_mode]); 1860 STps = &(STp->ps[STp->partition]); 1861 if (STps->eof == ST_FM_HIT) 1862 return 1; 1863 STbp = STp->buffer; 1864 1865 if (STp->block_size == 0) 1866 blks = bytes = count; 1867 else { 1868 if (!(STp->try_dio_now && try_rdio) && STm->do_read_ahead) { 1869 blks = (STp->buffer)->buffer_blocks; 1870 bytes = blks * STp->block_size; 1871 } else { 1872 bytes = count; 1873 if (!STbp->do_dio && bytes > (STp->buffer)->buffer_size) 1874 bytes = (STp->buffer)->buffer_size; 1875 blks = bytes / STp->block_size; 1876 bytes = blks * STp->block_size; 1877 } 1878 } 1879 1880 memset(cmd, 0, MAX_COMMAND_SIZE); 1881 cmd[0] = READ_6; 1882 cmd[1] = (STp->block_size != 0); 1883 if (!cmd[1] && STp->sili) 1884 cmd[1] |= 2; 1885 cmd[2] = blks >> 16; 1886 cmd[3] = blks >> 8; 1887 cmd[4] = blks; 1888 1889 SRpnt = *aSRpnt; 1890 SRpnt = st_do_scsi(SRpnt, STp, cmd, bytes, DMA_FROM_DEVICE, 1891 STp->device->request_queue->rq_timeout, 1892 MAX_RETRIES, 1); 1893 release_buffering(STp, 1); 1894 *aSRpnt = SRpnt; 1895 if (!SRpnt) 1896 return STbp->syscall_result; 1897 1898 STbp->read_pointer = 0; 1899 STps->at_sm = 0; 1900 1901 /* Something to check */ 1902 if (STbp->syscall_result) { 1903 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat; 1904 1905 retval = 1; 1906 DEBC_printk(STp, 1907 "Sense: %2x %2x %2x %2x %2x %2x %2x %2x\n", 1908 SRpnt->sense[0], SRpnt->sense[1], 1909 SRpnt->sense[2], SRpnt->sense[3], 1910 SRpnt->sense[4], SRpnt->sense[5], 1911 SRpnt->sense[6], SRpnt->sense[7]); 1912 if (cmdstatp->have_sense) { 1913 1914 if (cmdstatp->sense_hdr.sense_key == BLANK_CHECK) 1915 cmdstatp->flags &= 0xcf; /* No need for EOM in this case */ 1916 1917 if (cmdstatp->flags != 0) { /* EOF, EOM, or ILI */ 1918 /* Compute the residual count */ 1919 if (cmdstatp->remainder_valid) 1920 transfer = (int)cmdstatp->uremainder64; 1921 else 1922 transfer = 0; 1923 if (STp->block_size == 0 && 1924 cmdstatp->sense_hdr.sense_key == MEDIUM_ERROR) 1925 transfer = bytes; 1926 1927 if (cmdstatp->flags & SENSE_ILI) { /* ILI */ 1928 if (STp->block_size == 0 && 1929 transfer < 0) { 1930 st_printk(KERN_NOTICE, STp, 1931 "Failed to read %d " 1932 "byte block with %d " 1933 "byte transfer.\n", 1934 bytes - transfer, 1935 bytes); 1936 if (STps->drv_block >= 0) 1937 STps->drv_block += 1; 1938 STbp->buffer_bytes = 0; 1939 return (-ENOMEM); 1940 } else if (STp->block_size == 0) { 1941 STbp->buffer_bytes = bytes - transfer; 1942 } else { 1943 st_release_request(SRpnt); 1944 SRpnt = *aSRpnt = NULL; 1945 if (transfer == blks) { /* We did not get anything, error */ 1946 st_printk(KERN_NOTICE, STp, 1947 "Incorrect " 1948 "block size.\n"); 1949 if (STps->drv_block >= 0) 1950 STps->drv_block += blks - transfer + 1; 1951 st_int_ioctl(STp, MTBSR, 1); 1952 return (-EIO); 1953 } 1954 /* We have some data, deliver it */ 1955 STbp->buffer_bytes = (blks - transfer) * 1956 STp->block_size; 1957 DEBC_printk(STp, "ILI but " 1958 "enough data " 1959 "received %ld " 1960 "%d.\n", count, 1961 STbp->buffer_bytes); 1962 if (STps->drv_block >= 0) 1963 STps->drv_block += 1; 1964 if (st_int_ioctl(STp, MTBSR, 1)) 1965 return (-EIO); 1966 } 1967 } else if (cmdstatp->flags & SENSE_FMK) { /* FM overrides EOM */ 1968 if (STps->eof != ST_FM_HIT) 1969 STps->eof = ST_FM_HIT; 1970 else 1971 STps->eof = ST_EOD_2; 1972 if (STp->block_size == 0) 1973 STbp->buffer_bytes = 0; 1974 else 1975 STbp->buffer_bytes = 1976 bytes - transfer * STp->block_size; 1977 DEBC_printk(STp, "EOF detected (%d " 1978 "bytes read).\n", 1979 STbp->buffer_bytes); 1980 } else if (cmdstatp->flags & SENSE_EOM) { 1981 if (STps->eof == ST_FM) 1982 STps->eof = ST_EOD_1; 1983 else 1984 STps->eof = ST_EOM_OK; 1985 if (STp->block_size == 0) 1986 STbp->buffer_bytes = bytes - transfer; 1987 else 1988 STbp->buffer_bytes = 1989 bytes - transfer * STp->block_size; 1990 1991 DEBC_printk(STp, "EOM detected (%d " 1992 "bytes read).\n", 1993 STbp->buffer_bytes); 1994 } 1995 } 1996 /* end of EOF, EOM, ILI test */ 1997 else { /* nonzero sense key */ 1998 DEBC_printk(STp, "Tape error while reading.\n"); 1999 STps->drv_block = (-1); 2000 if (STps->eof == ST_FM && 2001 cmdstatp->sense_hdr.sense_key == BLANK_CHECK) { 2002 DEBC_printk(STp, "Zero returned for " 2003 "first BLANK CHECK " 2004 "after EOF.\n"); 2005 STps->eof = ST_EOD_2; /* First BLANK_CHECK after FM */ 2006 } else /* Some other extended sense code */ 2007 retval = (-EIO); 2008 } 2009 2010 if (STbp->buffer_bytes < 0) /* Caused by bogus sense data */ 2011 STbp->buffer_bytes = 0; 2012 } 2013 /* End of extended sense test */ 2014 else { /* Non-extended sense */ 2015 retval = STbp->syscall_result; 2016 } 2017 2018 } 2019 /* End of error handling */ 2020 else { /* Read successful */ 2021 STbp->buffer_bytes = bytes; 2022 if (STp->sili) /* In fixed block mode residual is always zero here */ 2023 STbp->buffer_bytes -= STp->buffer->cmdstat.residual; 2024 } 2025 2026 if (STps->drv_block >= 0) { 2027 if (STp->block_size == 0) 2028 STps->drv_block++; 2029 else 2030 STps->drv_block += STbp->buffer_bytes / STp->block_size; 2031 } 2032 return retval; 2033 } 2034 2035 2036 /* Read command */ 2037 static ssize_t 2038 st_read(struct file *filp, char __user *buf, size_t count, loff_t * ppos) 2039 { 2040 ssize_t total; 2041 ssize_t retval = 0; 2042 ssize_t i, transfer; 2043 int special, do_dio = 0; 2044 struct st_request *SRpnt = NULL; 2045 struct scsi_tape *STp = filp->private_data; 2046 struct st_modedef *STm; 2047 struct st_partstat *STps; 2048 struct st_buffer *STbp = STp->buffer; 2049 2050 if (mutex_lock_interruptible(&STp->lock)) 2051 return -ERESTARTSYS; 2052 2053 retval = rw_checks(STp, filp, count); 2054 if (retval || count == 0) 2055 goto out; 2056 2057 STm = &(STp->modes[STp->current_mode]); 2058 if (STp->block_size != 0 && (count % STp->block_size) != 0) { 2059 if (!STm->do_read_ahead) { 2060 retval = (-EINVAL); /* Read must be integral number of blocks */ 2061 goto out; 2062 } 2063 STp->try_dio_now = 0; /* Direct i/o can't handle split blocks */ 2064 } 2065 2066 STps = &(STp->ps[STp->partition]); 2067 if (STps->rw == ST_WRITING) { 2068 retval = flush_buffer(STp, 0); 2069 if (retval) 2070 goto out; 2071 STps->rw = ST_READING; 2072 } 2073 DEB( 2074 if (debugging && STps->eof != ST_NOEOF) 2075 st_printk(ST_DEB_MSG, STp, 2076 "EOF/EOM flag up (%d). Bytes %d\n", 2077 STps->eof, STbp->buffer_bytes); 2078 ) /* end DEB */ 2079 2080 retval = setup_buffering(STp, buf, count, 1); 2081 if (retval) 2082 goto out; 2083 do_dio = STbp->do_dio; 2084 2085 if (STbp->buffer_bytes == 0 && 2086 STps->eof >= ST_EOD_1) { 2087 if (STps->eof < ST_EOD) { 2088 STps->eof += 1; 2089 retval = 0; 2090 goto out; 2091 } 2092 retval = (-EIO); /* EOM or Blank Check */ 2093 goto out; 2094 } 2095 2096 if (do_dio) { 2097 /* Check the buffer writability before any tape movement. Don't alter 2098 buffer data. */ 2099 if (copy_from_user(&i, buf, 1) != 0 || 2100 copy_to_user(buf, &i, 1) != 0 || 2101 copy_from_user(&i, buf + count - 1, 1) != 0 || 2102 copy_to_user(buf + count - 1, &i, 1) != 0) { 2103 retval = (-EFAULT); 2104 goto out; 2105 } 2106 } 2107 2108 STps->rw = ST_READING; 2109 2110 2111 /* Loop until enough data in buffer or a special condition found */ 2112 for (total = 0, special = 0; total < count && !special;) { 2113 2114 /* Get new data if the buffer is empty */ 2115 if (STbp->buffer_bytes == 0) { 2116 special = read_tape(STp, count - total, &SRpnt); 2117 if (special < 0) { /* No need to continue read */ 2118 retval = special; 2119 goto out; 2120 } 2121 } 2122 2123 /* Move the data from driver buffer to user buffer */ 2124 if (STbp->buffer_bytes > 0) { 2125 DEB( 2126 if (debugging && STps->eof != ST_NOEOF) 2127 st_printk(ST_DEB_MSG, STp, 2128 "EOF up (%d). Left %d, needed %d.\n", 2129 STps->eof, STbp->buffer_bytes, 2130 (int)(count - total)); 2131 ) /* end DEB */ 2132 transfer = STbp->buffer_bytes < count - total ? 2133 STbp->buffer_bytes : count - total; 2134 if (!do_dio) { 2135 i = from_buffer(STbp, buf, transfer); 2136 if (i) { 2137 retval = i; 2138 goto out; 2139 } 2140 } 2141 buf += transfer; 2142 total += transfer; 2143 } 2144 2145 if (STp->block_size == 0) 2146 break; /* Read only one variable length block */ 2147 2148 } /* for (total = 0, special = 0; 2149 total < count && !special; ) */ 2150 2151 /* Change the eof state if no data from tape or buffer */ 2152 if (total == 0) { 2153 if (STps->eof == ST_FM_HIT) { 2154 STps->eof = ST_FM; 2155 STps->drv_block = 0; 2156 if (STps->drv_file >= 0) 2157 STps->drv_file++; 2158 } else if (STps->eof == ST_EOD_1) { 2159 STps->eof = ST_EOD_2; 2160 STps->drv_block = 0; 2161 if (STps->drv_file >= 0) 2162 STps->drv_file++; 2163 } else if (STps->eof == ST_EOD_2) 2164 STps->eof = ST_EOD; 2165 } else if (STps->eof == ST_FM) 2166 STps->eof = ST_NOEOF; 2167 retval = total; 2168 2169 out: 2170 if (SRpnt != NULL) { 2171 st_release_request(SRpnt); 2172 SRpnt = NULL; 2173 } 2174 if (do_dio) { 2175 release_buffering(STp, 1); 2176 STbp->buffer_bytes = 0; 2177 } 2178 mutex_unlock(&STp->lock); 2179 2180 return retval; 2181 } 2182 2183 2184 2185 DEB( 2186 /* Set the driver options */ 2187 static void st_log_options(struct scsi_tape * STp, struct st_modedef * STm) 2188 { 2189 if (debugging) { 2190 st_printk(KERN_INFO, STp, 2191 "Mode %d options: buffer writes: %d, " 2192 "async writes: %d, read ahead: %d\n", 2193 STp->current_mode, STm->do_buffer_writes, 2194 STm->do_async_writes, STm->do_read_ahead); 2195 st_printk(KERN_INFO, STp, 2196 " can bsr: %d, two FMs: %d, " 2197 "fast mteom: %d, auto lock: %d,\n", 2198 STp->can_bsr, STp->two_fm, STp->fast_mteom, 2199 STp->do_auto_lock); 2200 st_printk(KERN_INFO, STp, 2201 " defs for wr: %d, no block limits: %d, " 2202 "partitions: %d, s2 log: %d\n", 2203 STm->defaults_for_writes, STp->omit_blklims, 2204 STp->can_partitions, STp->scsi2_logical); 2205 st_printk(KERN_INFO, STp, 2206 " sysv: %d nowait: %d sili: %d " 2207 "nowait_filemark: %d\n", 2208 STm->sysv, STp->immediate, STp->sili, 2209 STp->immediate_filemark); 2210 st_printk(KERN_INFO, STp, " debugging: %d\n", debugging); 2211 } 2212 } 2213 ) 2214 2215 2216 static int st_set_options(struct scsi_tape *STp, long options) 2217 { 2218 int value; 2219 long code; 2220 struct st_modedef *STm; 2221 struct cdev *cd0, *cd1; 2222 struct device *d0, *d1; 2223 2224 STm = &(STp->modes[STp->current_mode]); 2225 if (!STm->defined) { 2226 cd0 = STm->cdevs[0]; 2227 cd1 = STm->cdevs[1]; 2228 d0 = STm->devs[0]; 2229 d1 = STm->devs[1]; 2230 memcpy(STm, &(STp->modes[0]), sizeof(struct st_modedef)); 2231 STm->cdevs[0] = cd0; 2232 STm->cdevs[1] = cd1; 2233 STm->devs[0] = d0; 2234 STm->devs[1] = d1; 2235 modes_defined = 1; 2236 DEBC_printk(STp, "Initialized mode %d definition from mode 0\n", 2237 STp->current_mode); 2238 } 2239 2240 code = options & MT_ST_OPTIONS; 2241 if (code == MT_ST_BOOLEANS) { 2242 STm->do_buffer_writes = (options & MT_ST_BUFFER_WRITES) != 0; 2243 STm->do_async_writes = (options & MT_ST_ASYNC_WRITES) != 0; 2244 STm->defaults_for_writes = (options & MT_ST_DEF_WRITES) != 0; 2245 STm->do_read_ahead = (options & MT_ST_READ_AHEAD) != 0; 2246 STp->two_fm = (options & MT_ST_TWO_FM) != 0; 2247 STp->fast_mteom = (options & MT_ST_FAST_MTEOM) != 0; 2248 STp->do_auto_lock = (options & MT_ST_AUTO_LOCK) != 0; 2249 STp->can_bsr = (options & MT_ST_CAN_BSR) != 0; 2250 STp->omit_blklims = (options & MT_ST_NO_BLKLIMS) != 0; 2251 if ((STp->device)->scsi_level >= SCSI_2) 2252 STp->can_partitions = (options & MT_ST_CAN_PARTITIONS) != 0; 2253 STp->scsi2_logical = (options & MT_ST_SCSI2LOGICAL) != 0; 2254 STp->immediate = (options & MT_ST_NOWAIT) != 0; 2255 STp->immediate_filemark = (options & MT_ST_NOWAIT_EOF) != 0; 2256 STm->sysv = (options & MT_ST_SYSV) != 0; 2257 STp->sili = (options & MT_ST_SILI) != 0; 2258 DEB( debugging = (options & MT_ST_DEBUGGING) != 0; 2259 st_log_options(STp, STm); ) 2260 } else if (code == MT_ST_SETBOOLEANS || code == MT_ST_CLEARBOOLEANS) { 2261 value = (code == MT_ST_SETBOOLEANS); 2262 if ((options & MT_ST_BUFFER_WRITES) != 0) 2263 STm->do_buffer_writes = value; 2264 if ((options & MT_ST_ASYNC_WRITES) != 0) 2265 STm->do_async_writes = value; 2266 if ((options & MT_ST_DEF_WRITES) != 0) 2267 STm->defaults_for_writes = value; 2268 if ((options & MT_ST_READ_AHEAD) != 0) 2269 STm->do_read_ahead = value; 2270 if ((options & MT_ST_TWO_FM) != 0) 2271 STp->two_fm = value; 2272 if ((options & MT_ST_FAST_MTEOM) != 0) 2273 STp->fast_mteom = value; 2274 if ((options & MT_ST_AUTO_LOCK) != 0) 2275 STp->do_auto_lock = value; 2276 if ((options & MT_ST_CAN_BSR) != 0) 2277 STp->can_bsr = value; 2278 if ((options & MT_ST_NO_BLKLIMS) != 0) 2279 STp->omit_blklims = value; 2280 if ((STp->device)->scsi_level >= SCSI_2 && 2281 (options & MT_ST_CAN_PARTITIONS) != 0) 2282 STp->can_partitions = value; 2283 if ((options & MT_ST_SCSI2LOGICAL) != 0) 2284 STp->scsi2_logical = value; 2285 if ((options & MT_ST_NOWAIT) != 0) 2286 STp->immediate = value; 2287 if ((options & MT_ST_NOWAIT_EOF) != 0) 2288 STp->immediate_filemark = value; 2289 if ((options & MT_ST_SYSV) != 0) 2290 STm->sysv = value; 2291 if ((options & MT_ST_SILI) != 0) 2292 STp->sili = value; 2293 DEB( 2294 if ((options & MT_ST_DEBUGGING) != 0) 2295 debugging = value; 2296 st_log_options(STp, STm); ) 2297 } else if (code == MT_ST_WRITE_THRESHOLD) { 2298 /* Retained for compatibility */ 2299 } else if (code == MT_ST_DEF_BLKSIZE) { 2300 value = (options & ~MT_ST_OPTIONS); 2301 if (value == ~MT_ST_OPTIONS) { 2302 STm->default_blksize = (-1); 2303 DEBC_printk(STp, "Default block size disabled.\n"); 2304 } else { 2305 STm->default_blksize = value; 2306 DEBC_printk(STp,"Default block size set to " 2307 "%d bytes.\n", STm->default_blksize); 2308 if (STp->ready == ST_READY) { 2309 STp->blksize_changed = 0; 2310 set_mode_densblk(STp, STm); 2311 } 2312 } 2313 } else if (code == MT_ST_TIMEOUTS) { 2314 value = (options & ~MT_ST_OPTIONS); 2315 if ((value & MT_ST_SET_LONG_TIMEOUT) != 0) { 2316 STp->long_timeout = (value & ~MT_ST_SET_LONG_TIMEOUT) * HZ; 2317 DEBC_printk(STp, "Long timeout set to %d seconds.\n", 2318 (value & ~MT_ST_SET_LONG_TIMEOUT)); 2319 } else { 2320 blk_queue_rq_timeout(STp->device->request_queue, 2321 value * HZ); 2322 DEBC_printk(STp, "Normal timeout set to %d seconds.\n", 2323 value); 2324 } 2325 } else if (code == MT_ST_SET_CLN) { 2326 value = (options & ~MT_ST_OPTIONS) & 0xff; 2327 if (value != 0 && 2328 (value < EXTENDED_SENSE_START || 2329 value >= SCSI_SENSE_BUFFERSIZE)) 2330 return (-EINVAL); 2331 STp->cln_mode = value; 2332 STp->cln_sense_mask = (options >> 8) & 0xff; 2333 STp->cln_sense_value = (options >> 16) & 0xff; 2334 st_printk(KERN_INFO, STp, 2335 "Cleaning request mode %d, mask %02x, value %02x\n", 2336 value, STp->cln_sense_mask, STp->cln_sense_value); 2337 } else if (code == MT_ST_DEF_OPTIONS) { 2338 code = (options & ~MT_ST_CLEAR_DEFAULT); 2339 value = (options & MT_ST_CLEAR_DEFAULT); 2340 if (code == MT_ST_DEF_DENSITY) { 2341 if (value == MT_ST_CLEAR_DEFAULT) { 2342 STm->default_density = (-1); 2343 DEBC_printk(STp, 2344 "Density default disabled.\n"); 2345 } else { 2346 STm->default_density = value & 0xff; 2347 DEBC_printk(STp, "Density default set to %x\n", 2348 STm->default_density); 2349 if (STp->ready == ST_READY) { 2350 STp->density_changed = 0; 2351 set_mode_densblk(STp, STm); 2352 } 2353 } 2354 } else if (code == MT_ST_DEF_DRVBUFFER) { 2355 if (value == MT_ST_CLEAR_DEFAULT) { 2356 STp->default_drvbuffer = 0xff; 2357 DEBC_printk(STp, 2358 "Drive buffer default disabled.\n"); 2359 } else { 2360 STp->default_drvbuffer = value & 7; 2361 DEBC_printk(STp, 2362 "Drive buffer default set to %x\n", 2363 STp->default_drvbuffer); 2364 if (STp->ready == ST_READY) 2365 st_int_ioctl(STp, MTSETDRVBUFFER, STp->default_drvbuffer); 2366 } 2367 } else if (code == MT_ST_DEF_COMPRESSION) { 2368 if (value == MT_ST_CLEAR_DEFAULT) { 2369 STm->default_compression = ST_DONT_TOUCH; 2370 DEBC_printk(STp, 2371 "Compression default disabled.\n"); 2372 } else { 2373 if ((value & 0xff00) != 0) { 2374 STp->c_algo = (value & 0xff00) >> 8; 2375 DEBC_printk(STp, "Compression " 2376 "algorithm set to 0x%x.\n", 2377 STp->c_algo); 2378 } 2379 if ((value & 0xff) != 0xff) { 2380 STm->default_compression = (value & 1 ? ST_YES : ST_NO); 2381 DEBC_printk(STp, "Compression default " 2382 "set to %x\n", 2383 (value & 1)); 2384 if (STp->ready == ST_READY) { 2385 STp->compression_changed = 0; 2386 st_compression(STp, (STm->default_compression == ST_YES)); 2387 } 2388 } 2389 } 2390 } 2391 } else 2392 return (-EIO); 2393 2394 return 0; 2395 } 2396 2397 #define MODE_HEADER_LENGTH 4 2398 2399 /* Mode header and page byte offsets */ 2400 #define MH_OFF_DATA_LENGTH 0 2401 #define MH_OFF_MEDIUM_TYPE 1 2402 #define MH_OFF_DEV_SPECIFIC 2 2403 #define MH_OFF_BDESCS_LENGTH 3 2404 #define MP_OFF_PAGE_NBR 0 2405 #define MP_OFF_PAGE_LENGTH 1 2406 2407 /* Mode header and page bit masks */ 2408 #define MH_BIT_WP 0x80 2409 #define MP_MSK_PAGE_NBR 0x3f 2410 2411 /* Don't return block descriptors */ 2412 #define MODE_SENSE_OMIT_BDESCS 0x08 2413 2414 #define MODE_SELECT_PAGE_FORMAT 0x10 2415 2416 /* Read a mode page into the tape buffer. The block descriptors are included 2417 if incl_block_descs is true. The page control is ored to the page number 2418 parameter, if necessary. */ 2419 static int read_mode_page(struct scsi_tape *STp, int page, int omit_block_descs) 2420 { 2421 unsigned char cmd[MAX_COMMAND_SIZE]; 2422 struct st_request *SRpnt; 2423 2424 memset(cmd, 0, MAX_COMMAND_SIZE); 2425 cmd[0] = MODE_SENSE; 2426 if (omit_block_descs) 2427 cmd[1] = MODE_SENSE_OMIT_BDESCS; 2428 cmd[2] = page; 2429 cmd[4] = 255; 2430 2431 SRpnt = st_do_scsi(NULL, STp, cmd, cmd[4], DMA_FROM_DEVICE, 2432 STp->device->request_queue->rq_timeout, 0, 1); 2433 if (SRpnt == NULL) 2434 return (STp->buffer)->syscall_result; 2435 2436 st_release_request(SRpnt); 2437 2438 return STp->buffer->syscall_result; 2439 } 2440 2441 2442 /* Send the mode page in the tape buffer to the drive. Assumes that the mode data 2443 in the buffer is correctly formatted. The long timeout is used if slow is non-zero. */ 2444 static int write_mode_page(struct scsi_tape *STp, int page, int slow) 2445 { 2446 int pgo; 2447 unsigned char cmd[MAX_COMMAND_SIZE]; 2448 struct st_request *SRpnt; 2449 int timeout; 2450 2451 memset(cmd, 0, MAX_COMMAND_SIZE); 2452 cmd[0] = MODE_SELECT; 2453 cmd[1] = MODE_SELECT_PAGE_FORMAT; 2454 pgo = MODE_HEADER_LENGTH + (STp->buffer)->b_data[MH_OFF_BDESCS_LENGTH]; 2455 cmd[4] = pgo + (STp->buffer)->b_data[pgo + MP_OFF_PAGE_LENGTH] + 2; 2456 2457 /* Clear reserved fields */ 2458 (STp->buffer)->b_data[MH_OFF_DATA_LENGTH] = 0; 2459 (STp->buffer)->b_data[MH_OFF_MEDIUM_TYPE] = 0; 2460 (STp->buffer)->b_data[MH_OFF_DEV_SPECIFIC] &= ~MH_BIT_WP; 2461 (STp->buffer)->b_data[pgo + MP_OFF_PAGE_NBR] &= MP_MSK_PAGE_NBR; 2462 2463 timeout = slow ? 2464 STp->long_timeout : STp->device->request_queue->rq_timeout; 2465 SRpnt = st_do_scsi(NULL, STp, cmd, cmd[4], DMA_TO_DEVICE, 2466 timeout, 0, 1); 2467 if (SRpnt == NULL) 2468 return (STp->buffer)->syscall_result; 2469 2470 st_release_request(SRpnt); 2471 2472 return STp->buffer->syscall_result; 2473 } 2474 2475 2476 #define COMPRESSION_PAGE 0x0f 2477 #define COMPRESSION_PAGE_LENGTH 16 2478 2479 #define CP_OFF_DCE_DCC 2 2480 #define CP_OFF_C_ALGO 7 2481 2482 #define DCE_MASK 0x80 2483 #define DCC_MASK 0x40 2484 #define RED_MASK 0x60 2485 2486 2487 /* Control the compression with mode page 15. Algorithm not changed if zero. 2488 2489 The block descriptors are read and written because Sony SDT-7000 does not 2490 work without this (suggestion from Michael Schaefer <Michael.Schaefer@dlr.de>). 2491 Including block descriptors should not cause any harm to other drives. */ 2492 2493 static int st_compression(struct scsi_tape * STp, int state) 2494 { 2495 int retval; 2496 int mpoffs; /* Offset to mode page start */ 2497 unsigned char *b_data = (STp->buffer)->b_data; 2498 2499 if (STp->ready != ST_READY) 2500 return (-EIO); 2501 2502 /* Read the current page contents */ 2503 retval = read_mode_page(STp, COMPRESSION_PAGE, 0); 2504 if (retval) { 2505 DEBC_printk(STp, "Compression mode page not supported.\n"); 2506 return (-EIO); 2507 } 2508 2509 mpoffs = MODE_HEADER_LENGTH + b_data[MH_OFF_BDESCS_LENGTH]; 2510 DEBC_printk(STp, "Compression state is %d.\n", 2511 (b_data[mpoffs + CP_OFF_DCE_DCC] & DCE_MASK ? 1 : 0)); 2512 2513 /* Check if compression can be changed */ 2514 if ((b_data[mpoffs + CP_OFF_DCE_DCC] & DCC_MASK) == 0) { 2515 DEBC_printk(STp, "Compression not supported.\n"); 2516 return (-EIO); 2517 } 2518 2519 /* Do the change */ 2520 if (state) { 2521 b_data[mpoffs + CP_OFF_DCE_DCC] |= DCE_MASK; 2522 if (STp->c_algo != 0) 2523 b_data[mpoffs + CP_OFF_C_ALGO] = STp->c_algo; 2524 } 2525 else { 2526 b_data[mpoffs + CP_OFF_DCE_DCC] &= ~DCE_MASK; 2527 if (STp->c_algo != 0) 2528 b_data[mpoffs + CP_OFF_C_ALGO] = 0; /* no compression */ 2529 } 2530 2531 retval = write_mode_page(STp, COMPRESSION_PAGE, 0); 2532 if (retval) { 2533 DEBC_printk(STp, "Compression change failed.\n"); 2534 return (-EIO); 2535 } 2536 DEBC_printk(STp, "Compression state changed to %d.\n", state); 2537 2538 STp->compression_changed = 1; 2539 return 0; 2540 } 2541 2542 2543 /* Process the load and unload commands (does unload if the load code is zero) */ 2544 static int do_load_unload(struct scsi_tape *STp, struct file *filp, int load_code) 2545 { 2546 int retval = (-EIO), timeout; 2547 unsigned char cmd[MAX_COMMAND_SIZE]; 2548 struct st_partstat *STps; 2549 struct st_request *SRpnt; 2550 2551 if (STp->ready != ST_READY && !load_code) { 2552 if (STp->ready == ST_NO_TAPE) 2553 return (-ENOMEDIUM); 2554 else 2555 return (-EIO); 2556 } 2557 2558 memset(cmd, 0, MAX_COMMAND_SIZE); 2559 cmd[0] = START_STOP; 2560 if (load_code) 2561 cmd[4] |= 1; 2562 /* 2563 * If arg >= 1 && arg <= 6 Enhanced load/unload in HP C1553A 2564 */ 2565 if (load_code >= 1 + MT_ST_HPLOADER_OFFSET 2566 && load_code <= 6 + MT_ST_HPLOADER_OFFSET) { 2567 DEBC_printk(STp, " Enhanced %sload slot %2d.\n", 2568 (cmd[4]) ? "" : "un", 2569 load_code - MT_ST_HPLOADER_OFFSET); 2570 cmd[3] = load_code - MT_ST_HPLOADER_OFFSET; /* MediaID field of C1553A */ 2571 } 2572 if (STp->immediate) { 2573 cmd[1] = 1; /* Don't wait for completion */ 2574 timeout = STp->device->request_queue->rq_timeout; 2575 } 2576 else 2577 timeout = STp->long_timeout; 2578 2579 DEBC( 2580 if (!load_code) 2581 st_printk(ST_DEB_MSG, STp, "Unloading tape.\n"); 2582 else 2583 st_printk(ST_DEB_MSG, STp, "Loading tape.\n"); 2584 ); 2585 2586 SRpnt = st_do_scsi(NULL, STp, cmd, 0, DMA_NONE, 2587 timeout, MAX_RETRIES, 1); 2588 if (!SRpnt) 2589 return (STp->buffer)->syscall_result; 2590 2591 retval = (STp->buffer)->syscall_result; 2592 st_release_request(SRpnt); 2593 2594 if (!retval) { /* SCSI command successful */ 2595 2596 if (!load_code) { 2597 STp->rew_at_close = 0; 2598 STp->ready = ST_NO_TAPE; 2599 } 2600 else { 2601 STp->rew_at_close = STp->autorew_dev; 2602 retval = check_tape(STp, filp); 2603 if (retval > 0) 2604 retval = 0; 2605 } 2606 } 2607 else { 2608 STps = &(STp->ps[STp->partition]); 2609 STps->drv_file = STps->drv_block = (-1); 2610 } 2611 2612 return retval; 2613 } 2614 2615 #if DEBUG 2616 #define ST_DEB_FORWARD 0 2617 #define ST_DEB_BACKWARD 1 2618 static void deb_space_print(struct scsi_tape *STp, int direction, char *units, unsigned char *cmd) 2619 { 2620 s32 sc; 2621 2622 if (!debugging) 2623 return; 2624 2625 sc = cmd[2] & 0x80 ? 0xff000000 : 0; 2626 sc |= (cmd[2] << 16) | (cmd[3] << 8) | cmd[4]; 2627 if (direction) 2628 sc = -sc; 2629 st_printk(ST_DEB_MSG, STp, "Spacing tape %s over %d %s.\n", 2630 direction ? "backward" : "forward", sc, units); 2631 } 2632 #else 2633 #define ST_DEB_FORWARD 0 2634 #define ST_DEB_BACKWARD 1 2635 static void deb_space_print(struct scsi_tape *STp, int direction, char *units, unsigned char *cmd) {} 2636 #endif 2637 2638 2639 /* Internal ioctl function */ 2640 static int st_int_ioctl(struct scsi_tape *STp, unsigned int cmd_in, unsigned long arg) 2641 { 2642 int timeout; 2643 long ltmp; 2644 int ioctl_result; 2645 int chg_eof = 1; 2646 unsigned char cmd[MAX_COMMAND_SIZE]; 2647 struct st_request *SRpnt; 2648 struct st_partstat *STps; 2649 int fileno, blkno, at_sm, undone; 2650 int datalen = 0, direction = DMA_NONE; 2651 2652 WARN_ON(STp->buffer->do_dio != 0); 2653 if (STp->ready != ST_READY) { 2654 if (STp->ready == ST_NO_TAPE) 2655 return (-ENOMEDIUM); 2656 else 2657 return (-EIO); 2658 } 2659 timeout = STp->long_timeout; 2660 STps = &(STp->ps[STp->partition]); 2661 fileno = STps->drv_file; 2662 blkno = STps->drv_block; 2663 at_sm = STps->at_sm; 2664 2665 memset(cmd, 0, MAX_COMMAND_SIZE); 2666 switch (cmd_in) { 2667 case MTFSFM: 2668 chg_eof = 0; /* Changed from the FSF after this */ 2669 case MTFSF: 2670 cmd[0] = SPACE; 2671 cmd[1] = 0x01; /* Space FileMarks */ 2672 cmd[2] = (arg >> 16); 2673 cmd[3] = (arg >> 8); 2674 cmd[4] = arg; 2675 deb_space_print(STp, ST_DEB_FORWARD, "filemarks", cmd); 2676 if (fileno >= 0) 2677 fileno += arg; 2678 blkno = 0; 2679 at_sm &= (arg == 0); 2680 break; 2681 case MTBSFM: 2682 chg_eof = 0; /* Changed from the FSF after this */ 2683 case MTBSF: 2684 cmd[0] = SPACE; 2685 cmd[1] = 0x01; /* Space FileMarks */ 2686 ltmp = (-arg); 2687 cmd[2] = (ltmp >> 16); 2688 cmd[3] = (ltmp >> 8); 2689 cmd[4] = ltmp; 2690 deb_space_print(STp, ST_DEB_BACKWARD, "filemarks", cmd); 2691 if (fileno >= 0) 2692 fileno -= arg; 2693 blkno = (-1); /* We can't know the block number */ 2694 at_sm &= (arg == 0); 2695 break; 2696 case MTFSR: 2697 cmd[0] = SPACE; 2698 cmd[1] = 0x00; /* Space Blocks */ 2699 cmd[2] = (arg >> 16); 2700 cmd[3] = (arg >> 8); 2701 cmd[4] = arg; 2702 deb_space_print(STp, ST_DEB_FORWARD, "blocks", cmd); 2703 if (blkno >= 0) 2704 blkno += arg; 2705 at_sm &= (arg == 0); 2706 break; 2707 case MTBSR: 2708 cmd[0] = SPACE; 2709 cmd[1] = 0x00; /* Space Blocks */ 2710 ltmp = (-arg); 2711 cmd[2] = (ltmp >> 16); 2712 cmd[3] = (ltmp >> 8); 2713 cmd[4] = ltmp; 2714 deb_space_print(STp, ST_DEB_BACKWARD, "blocks", cmd); 2715 if (blkno >= 0) 2716 blkno -= arg; 2717 at_sm &= (arg == 0); 2718 break; 2719 case MTFSS: 2720 cmd[0] = SPACE; 2721 cmd[1] = 0x04; /* Space Setmarks */ 2722 cmd[2] = (arg >> 16); 2723 cmd[3] = (arg >> 8); 2724 cmd[4] = arg; 2725 deb_space_print(STp, ST_DEB_FORWARD, "setmarks", cmd); 2726 if (arg != 0) { 2727 blkno = fileno = (-1); 2728 at_sm = 1; 2729 } 2730 break; 2731 case MTBSS: 2732 cmd[0] = SPACE; 2733 cmd[1] = 0x04; /* Space Setmarks */ 2734 ltmp = (-arg); 2735 cmd[2] = (ltmp >> 16); 2736 cmd[3] = (ltmp >> 8); 2737 cmd[4] = ltmp; 2738 deb_space_print(STp, ST_DEB_BACKWARD, "setmarks", cmd); 2739 if (arg != 0) { 2740 blkno = fileno = (-1); 2741 at_sm = 1; 2742 } 2743 break; 2744 case MTWEOF: 2745 case MTWEOFI: 2746 case MTWSM: 2747 if (STp->write_prot) 2748 return (-EACCES); 2749 cmd[0] = WRITE_FILEMARKS; 2750 if (cmd_in == MTWSM) 2751 cmd[1] = 2; 2752 if (cmd_in == MTWEOFI || 2753 (cmd_in == MTWEOF && STp->immediate_filemark)) 2754 cmd[1] |= 1; 2755 cmd[2] = (arg >> 16); 2756 cmd[3] = (arg >> 8); 2757 cmd[4] = arg; 2758 timeout = STp->device->request_queue->rq_timeout; 2759 DEBC( 2760 if (cmd_in != MTWSM) 2761 st_printk(ST_DEB_MSG, STp, 2762 "Writing %d filemarks.\n", 2763 cmd[2] * 65536 + 2764 cmd[3] * 256 + 2765 cmd[4]); 2766 else 2767 st_printk(ST_DEB_MSG, STp, 2768 "Writing %d setmarks.\n", 2769 cmd[2] * 65536 + 2770 cmd[3] * 256 + 2771 cmd[4]); 2772 ) 2773 if (fileno >= 0) 2774 fileno += arg; 2775 blkno = 0; 2776 at_sm = (cmd_in == MTWSM); 2777 break; 2778 case MTREW: 2779 cmd[0] = REZERO_UNIT; 2780 if (STp->immediate) { 2781 cmd[1] = 1; /* Don't wait for completion */ 2782 timeout = STp->device->request_queue->rq_timeout; 2783 } 2784 DEBC_printk(STp, "Rewinding tape.\n"); 2785 fileno = blkno = at_sm = 0; 2786 break; 2787 case MTNOP: 2788 DEBC_printk(STp, "No op on tape.\n"); 2789 return 0; /* Should do something ? */ 2790 break; 2791 case MTRETEN: 2792 cmd[0] = START_STOP; 2793 if (STp->immediate) { 2794 cmd[1] = 1; /* Don't wait for completion */ 2795 timeout = STp->device->request_queue->rq_timeout; 2796 } 2797 cmd[4] = 3; 2798 DEBC_printk(STp, "Retensioning tape.\n"); 2799 fileno = blkno = at_sm = 0; 2800 break; 2801 case MTEOM: 2802 if (!STp->fast_mteom) { 2803 /* space to the end of tape */ 2804 ioctl_result = st_int_ioctl(STp, MTFSF, 0x7fffff); 2805 fileno = STps->drv_file; 2806 if (STps->eof >= ST_EOD_1) 2807 return 0; 2808 /* The next lines would hide the number of spaced FileMarks 2809 That's why I inserted the previous lines. I had no luck 2810 with detecting EOM with FSF, so we go now to EOM. 2811 Joerg Weule */ 2812 } else 2813 fileno = (-1); 2814 cmd[0] = SPACE; 2815 cmd[1] = 3; 2816 DEBC_printk(STp, "Spacing to end of recorded medium.\n"); 2817 blkno = -1; 2818 at_sm = 0; 2819 break; 2820 case MTERASE: 2821 if (STp->write_prot) 2822 return (-EACCES); 2823 cmd[0] = ERASE; 2824 cmd[1] = (arg ? 1 : 0); /* Long erase with non-zero argument */ 2825 if (STp->immediate) { 2826 cmd[1] |= 2; /* Don't wait for completion */ 2827 timeout = STp->device->request_queue->rq_timeout; 2828 } 2829 else 2830 timeout = STp->long_timeout * 8; 2831 2832 DEBC_printk(STp, "Erasing tape.\n"); 2833 fileno = blkno = at_sm = 0; 2834 break; 2835 case MTSETBLK: /* Set block length */ 2836 case MTSETDENSITY: /* Set tape density */ 2837 case MTSETDRVBUFFER: /* Set drive buffering */ 2838 case SET_DENS_AND_BLK: /* Set density and block size */ 2839 chg_eof = 0; 2840 if (STp->dirty || (STp->buffer)->buffer_bytes != 0) 2841 return (-EIO); /* Not allowed if data in buffer */ 2842 if ((cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) && 2843 (arg & MT_ST_BLKSIZE_MASK) != 0 && 2844 STp->max_block > 0 && 2845 ((arg & MT_ST_BLKSIZE_MASK) < STp->min_block || 2846 (arg & MT_ST_BLKSIZE_MASK) > STp->max_block)) { 2847 st_printk(KERN_WARNING, STp, "Illegal block size.\n"); 2848 return (-EINVAL); 2849 } 2850 cmd[0] = MODE_SELECT; 2851 if ((STp->use_pf & USE_PF)) 2852 cmd[1] = MODE_SELECT_PAGE_FORMAT; 2853 cmd[4] = datalen = 12; 2854 direction = DMA_TO_DEVICE; 2855 2856 memset((STp->buffer)->b_data, 0, 12); 2857 if (cmd_in == MTSETDRVBUFFER) 2858 (STp->buffer)->b_data[2] = (arg & 7) << 4; 2859 else 2860 (STp->buffer)->b_data[2] = 2861 STp->drv_buffer << 4; 2862 (STp->buffer)->b_data[3] = 8; /* block descriptor length */ 2863 if (cmd_in == MTSETDENSITY) { 2864 (STp->buffer)->b_data[4] = arg; 2865 STp->density_changed = 1; /* At least we tried ;-) */ 2866 } else if (cmd_in == SET_DENS_AND_BLK) 2867 (STp->buffer)->b_data[4] = arg >> 24; 2868 else 2869 (STp->buffer)->b_data[4] = STp->density; 2870 if (cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) { 2871 ltmp = arg & MT_ST_BLKSIZE_MASK; 2872 if (cmd_in == MTSETBLK) 2873 STp->blksize_changed = 1; /* At least we tried ;-) */ 2874 } else 2875 ltmp = STp->block_size; 2876 (STp->buffer)->b_data[9] = (ltmp >> 16); 2877 (STp->buffer)->b_data[10] = (ltmp >> 8); 2878 (STp->buffer)->b_data[11] = ltmp; 2879 timeout = STp->device->request_queue->rq_timeout; 2880 DEBC( 2881 if (cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) 2882 st_printk(ST_DEB_MSG, STp, 2883 "Setting block size to %d bytes.\n", 2884 (STp->buffer)->b_data[9] * 65536 + 2885 (STp->buffer)->b_data[10] * 256 + 2886 (STp->buffer)->b_data[11]); 2887 if (cmd_in == MTSETDENSITY || cmd_in == SET_DENS_AND_BLK) 2888 st_printk(ST_DEB_MSG, STp, 2889 "Setting density code to %x.\n", 2890 (STp->buffer)->b_data[4]); 2891 if (cmd_in == MTSETDRVBUFFER) 2892 st_printk(ST_DEB_MSG, STp, 2893 "Setting drive buffer code to %d.\n", 2894 ((STp->buffer)->b_data[2] >> 4) & 7); 2895 ) 2896 break; 2897 default: 2898 return (-ENOSYS); 2899 } 2900 2901 SRpnt = st_do_scsi(NULL, STp, cmd, datalen, direction, 2902 timeout, MAX_RETRIES, 1); 2903 if (!SRpnt) 2904 return (STp->buffer)->syscall_result; 2905 2906 ioctl_result = (STp->buffer)->syscall_result; 2907 2908 if (!ioctl_result) { /* SCSI command successful */ 2909 st_release_request(SRpnt); 2910 SRpnt = NULL; 2911 STps->drv_block = blkno; 2912 STps->drv_file = fileno; 2913 STps->at_sm = at_sm; 2914 2915 if (cmd_in == MTBSFM) 2916 ioctl_result = st_int_ioctl(STp, MTFSF, 1); 2917 else if (cmd_in == MTFSFM) 2918 ioctl_result = st_int_ioctl(STp, MTBSF, 1); 2919 2920 if (cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) { 2921 STp->block_size = arg & MT_ST_BLKSIZE_MASK; 2922 if (STp->block_size != 0) { 2923 (STp->buffer)->buffer_blocks = 2924 (STp->buffer)->buffer_size / STp->block_size; 2925 } 2926 (STp->buffer)->buffer_bytes = (STp->buffer)->read_pointer = 0; 2927 if (cmd_in == SET_DENS_AND_BLK) 2928 STp->density = arg >> MT_ST_DENSITY_SHIFT; 2929 } else if (cmd_in == MTSETDRVBUFFER) 2930 STp->drv_buffer = (arg & 7); 2931 else if (cmd_in == MTSETDENSITY) 2932 STp->density = arg; 2933 2934 if (cmd_in == MTEOM) 2935 STps->eof = ST_EOD; 2936 else if (cmd_in == MTFSF) 2937 STps->eof = ST_FM; 2938 else if (chg_eof) 2939 STps->eof = ST_NOEOF; 2940 2941 if (cmd_in == MTWEOF || cmd_in == MTWEOFI) 2942 STps->rw = ST_IDLE; /* prevent automatic WEOF at close */ 2943 } else { /* SCSI command was not completely successful. Don't return 2944 from this block without releasing the SCSI command block! */ 2945 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat; 2946 2947 if (cmdstatp->flags & SENSE_EOM) { 2948 if (cmd_in != MTBSF && cmd_in != MTBSFM && 2949 cmd_in != MTBSR && cmd_in != MTBSS) 2950 STps->eof = ST_EOM_OK; 2951 STps->drv_block = 0; 2952 } 2953 2954 if (cmdstatp->remainder_valid) 2955 undone = (int)cmdstatp->uremainder64; 2956 else 2957 undone = 0; 2958 2959 if ((cmd_in == MTWEOF || cmd_in == MTWEOFI) && 2960 cmdstatp->have_sense && 2961 (cmdstatp->flags & SENSE_EOM)) { 2962 if (cmdstatp->sense_hdr.sense_key == NO_SENSE || 2963 cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR) { 2964 ioctl_result = 0; /* EOF(s) written successfully at EOM */ 2965 STps->eof = ST_NOEOF; 2966 } else { /* Writing EOF(s) failed */ 2967 if (fileno >= 0) 2968 fileno -= undone; 2969 if (undone < arg) 2970 STps->eof = ST_NOEOF; 2971 } 2972 STps->drv_file = fileno; 2973 } else if ((cmd_in == MTFSF) || (cmd_in == MTFSFM)) { 2974 if (fileno >= 0) 2975 STps->drv_file = fileno - undone; 2976 else 2977 STps->drv_file = fileno; 2978 STps->drv_block = -1; 2979 STps->eof = ST_NOEOF; 2980 } else if ((cmd_in == MTBSF) || (cmd_in == MTBSFM)) { 2981 if (arg > 0 && undone < 0) /* Some drives get this wrong */ 2982 undone = (-undone); 2983 if (STps->drv_file >= 0) 2984 STps->drv_file = fileno + undone; 2985 STps->drv_block = 0; 2986 STps->eof = ST_NOEOF; 2987 } else if (cmd_in == MTFSR) { 2988 if (cmdstatp->flags & SENSE_FMK) { /* Hit filemark */ 2989 if (STps->drv_file >= 0) 2990 STps->drv_file++; 2991 STps->drv_block = 0; 2992 STps->eof = ST_FM; 2993 } else { 2994 if (blkno >= undone) 2995 STps->drv_block = blkno - undone; 2996 else 2997 STps->drv_block = (-1); 2998 STps->eof = ST_NOEOF; 2999 } 3000 } else if (cmd_in == MTBSR) { 3001 if (cmdstatp->flags & SENSE_FMK) { /* Hit filemark */ 3002 STps->drv_file--; 3003 STps->drv_block = (-1); 3004 } else { 3005 if (arg > 0 && undone < 0) /* Some drives get this wrong */ 3006 undone = (-undone); 3007 if (STps->drv_block >= 0) 3008 STps->drv_block = blkno + undone; 3009 } 3010 STps->eof = ST_NOEOF; 3011 } else if (cmd_in == MTEOM) { 3012 STps->drv_file = (-1); 3013 STps->drv_block = (-1); 3014 STps->eof = ST_EOD; 3015 } else if (cmd_in == MTSETBLK || 3016 cmd_in == MTSETDENSITY || 3017 cmd_in == MTSETDRVBUFFER || 3018 cmd_in == SET_DENS_AND_BLK) { 3019 if (cmdstatp->sense_hdr.sense_key == ILLEGAL_REQUEST && 3020 !(STp->use_pf & PF_TESTED)) { 3021 /* Try the other possible state of Page Format if not 3022 already tried */ 3023 STp->use_pf = (STp->use_pf ^ USE_PF) | PF_TESTED; 3024 st_release_request(SRpnt); 3025 SRpnt = NULL; 3026 return st_int_ioctl(STp, cmd_in, arg); 3027 } 3028 } else if (chg_eof) 3029 STps->eof = ST_NOEOF; 3030 3031 if (cmdstatp->sense_hdr.sense_key == BLANK_CHECK) 3032 STps->eof = ST_EOD; 3033 3034 st_release_request(SRpnt); 3035 SRpnt = NULL; 3036 } 3037 3038 return ioctl_result; 3039 } 3040 3041 3042 /* Get the tape position. If bt == 2, arg points into a kernel space mt_loc 3043 structure. */ 3044 3045 static int get_location(struct scsi_tape *STp, unsigned int *block, int *partition, 3046 int logical) 3047 { 3048 int result; 3049 unsigned char scmd[MAX_COMMAND_SIZE]; 3050 struct st_request *SRpnt; 3051 3052 if (STp->ready != ST_READY) 3053 return (-EIO); 3054 3055 memset(scmd, 0, MAX_COMMAND_SIZE); 3056 if ((STp->device)->scsi_level < SCSI_2) { 3057 scmd[0] = QFA_REQUEST_BLOCK; 3058 scmd[4] = 3; 3059 } else { 3060 scmd[0] = READ_POSITION; 3061 if (!logical && !STp->scsi2_logical) 3062 scmd[1] = 1; 3063 } 3064 SRpnt = st_do_scsi(NULL, STp, scmd, 20, DMA_FROM_DEVICE, 3065 STp->device->request_queue->rq_timeout, 3066 MAX_READY_RETRIES, 1); 3067 if (!SRpnt) 3068 return (STp->buffer)->syscall_result; 3069 3070 if ((STp->buffer)->syscall_result != 0 || 3071 (STp->device->scsi_level >= SCSI_2 && 3072 ((STp->buffer)->b_data[0] & 4) != 0)) { 3073 *block = *partition = 0; 3074 DEBC_printk(STp, " Can't read tape position.\n"); 3075 result = (-EIO); 3076 } else { 3077 result = 0; 3078 if ((STp->device)->scsi_level < SCSI_2) { 3079 *block = ((STp->buffer)->b_data[0] << 16) 3080 + ((STp->buffer)->b_data[1] << 8) 3081 + (STp->buffer)->b_data[2]; 3082 *partition = 0; 3083 } else { 3084 *block = ((STp->buffer)->b_data[4] << 24) 3085 + ((STp->buffer)->b_data[5] << 16) 3086 + ((STp->buffer)->b_data[6] << 8) 3087 + (STp->buffer)->b_data[7]; 3088 *partition = (STp->buffer)->b_data[1]; 3089 if (((STp->buffer)->b_data[0] & 0x80) && 3090 (STp->buffer)->b_data[1] == 0) /* BOP of partition 0 */ 3091 STp->ps[0].drv_block = STp->ps[0].drv_file = 0; 3092 } 3093 DEBC_printk(STp, "Got tape pos. blk %d part %d.\n", 3094 *block, *partition); 3095 } 3096 st_release_request(SRpnt); 3097 SRpnt = NULL; 3098 3099 return result; 3100 } 3101 3102 3103 /* Set the tape block and partition. Negative partition means that only the 3104 block should be set in vendor specific way. */ 3105 static int set_location(struct scsi_tape *STp, unsigned int block, int partition, 3106 int logical) 3107 { 3108 struct st_partstat *STps; 3109 int result, p; 3110 unsigned int blk; 3111 int timeout; 3112 unsigned char scmd[MAX_COMMAND_SIZE]; 3113 struct st_request *SRpnt; 3114 3115 if (STp->ready != ST_READY) 3116 return (-EIO); 3117 timeout = STp->long_timeout; 3118 STps = &(STp->ps[STp->partition]); 3119 3120 DEBC_printk(STp, "Setting block to %d and partition to %d.\n", 3121 block, partition); 3122 DEB(if (partition < 0) 3123 return (-EIO); ) 3124 3125 /* Update the location at the partition we are leaving */ 3126 if ((!STp->can_partitions && partition != 0) || 3127 partition >= ST_NBR_PARTITIONS) 3128 return (-EINVAL); 3129 if (partition != STp->partition) { 3130 if (get_location(STp, &blk, &p, 1)) 3131 STps->last_block_valid = 0; 3132 else { 3133 STps->last_block_valid = 1; 3134 STps->last_block_visited = blk; 3135 DEBC_printk(STp, "Visited block %d for " 3136 "partition %d saved.\n", 3137 blk, STp->partition); 3138 } 3139 } 3140 3141 memset(scmd, 0, MAX_COMMAND_SIZE); 3142 if ((STp->device)->scsi_level < SCSI_2) { 3143 scmd[0] = QFA_SEEK_BLOCK; 3144 scmd[2] = (block >> 16); 3145 scmd[3] = (block >> 8); 3146 scmd[4] = block; 3147 scmd[5] = 0; 3148 } else { 3149 scmd[0] = SEEK_10; 3150 scmd[3] = (block >> 24); 3151 scmd[4] = (block >> 16); 3152 scmd[5] = (block >> 8); 3153 scmd[6] = block; 3154 if (!logical && !STp->scsi2_logical) 3155 scmd[1] = 4; 3156 if (STp->partition != partition) { 3157 scmd[1] |= 2; 3158 scmd[8] = partition; 3159 DEBC_printk(STp, "Trying to change partition " 3160 "from %d to %d\n", STp->partition, 3161 partition); 3162 } 3163 } 3164 if (STp->immediate) { 3165 scmd[1] |= 1; /* Don't wait for completion */ 3166 timeout = STp->device->request_queue->rq_timeout; 3167 } 3168 3169 SRpnt = st_do_scsi(NULL, STp, scmd, 0, DMA_NONE, 3170 timeout, MAX_READY_RETRIES, 1); 3171 if (!SRpnt) 3172 return (STp->buffer)->syscall_result; 3173 3174 STps->drv_block = STps->drv_file = (-1); 3175 STps->eof = ST_NOEOF; 3176 if ((STp->buffer)->syscall_result != 0) { 3177 result = (-EIO); 3178 if (STp->can_partitions && 3179 (STp->device)->scsi_level >= SCSI_2 && 3180 (p = find_partition(STp)) >= 0) 3181 STp->partition = p; 3182 } else { 3183 if (STp->can_partitions) { 3184 STp->partition = partition; 3185 STps = &(STp->ps[partition]); 3186 if (!STps->last_block_valid || 3187 STps->last_block_visited != block) { 3188 STps->at_sm = 0; 3189 STps->rw = ST_IDLE; 3190 } 3191 } else 3192 STps->at_sm = 0; 3193 if (block == 0) 3194 STps->drv_block = STps->drv_file = 0; 3195 result = 0; 3196 } 3197 3198 st_release_request(SRpnt); 3199 SRpnt = NULL; 3200 3201 return result; 3202 } 3203 3204 3205 /* Find the current partition number for the drive status. Called from open and 3206 returns either partition number of negative error code. */ 3207 static int find_partition(struct scsi_tape *STp) 3208 { 3209 int i, partition; 3210 unsigned int block; 3211 3212 if ((i = get_location(STp, &block, &partition, 1)) < 0) 3213 return i; 3214 if (partition >= ST_NBR_PARTITIONS) 3215 return (-EIO); 3216 return partition; 3217 } 3218 3219 3220 /* Change the partition if necessary */ 3221 static int switch_partition(struct scsi_tape *STp) 3222 { 3223 struct st_partstat *STps; 3224 3225 if (STp->partition == STp->new_partition) 3226 return 0; 3227 STps = &(STp->ps[STp->new_partition]); 3228 if (!STps->last_block_valid) 3229 STps->last_block_visited = 0; 3230 return set_location(STp, STps->last_block_visited, STp->new_partition, 1); 3231 } 3232 3233 /* Functions for reading and writing the medium partition mode page. */ 3234 3235 #define PART_PAGE 0x11 3236 #define PART_PAGE_FIXED_LENGTH 8 3237 3238 #define PP_OFF_MAX_ADD_PARTS 2 3239 #define PP_OFF_NBR_ADD_PARTS 3 3240 #define PP_OFF_FLAGS 4 3241 #define PP_OFF_PART_UNITS 6 3242 #define PP_OFF_RESERVED 7 3243 3244 #define PP_BIT_IDP 0x20 3245 #define PP_MSK_PSUM_MB 0x10 3246 3247 /* Get the number of partitions on the tape. As a side effect reads the 3248 mode page into the tape buffer. */ 3249 static int nbr_partitions(struct scsi_tape *STp) 3250 { 3251 int result; 3252 3253 if (STp->ready != ST_READY) 3254 return (-EIO); 3255 3256 result = read_mode_page(STp, PART_PAGE, 1); 3257 3258 if (result) { 3259 DEBC_printk(STp, "Can't read medium partition page.\n"); 3260 result = (-EIO); 3261 } else { 3262 result = (STp->buffer)->b_data[MODE_HEADER_LENGTH + 3263 PP_OFF_NBR_ADD_PARTS] + 1; 3264 DEBC_printk(STp, "Number of partitions %d.\n", result); 3265 } 3266 3267 return result; 3268 } 3269 3270 3271 /* Partition the tape into two partitions if size > 0 or one partition if 3272 size == 0. 3273 3274 The block descriptors are read and written because Sony SDT-7000 does not 3275 work without this (suggestion from Michael Schaefer <Michael.Schaefer@dlr.de>). 3276 3277 My HP C1533A drive returns only one partition size field. This is used to 3278 set the size of partition 1. There is no size field for the default partition. 3279 Michael Schaefer's Sony SDT-7000 returns two descriptors and the second is 3280 used to set the size of partition 1 (this is what the SCSI-3 standard specifies). 3281 The following algorithm is used to accommodate both drives: if the number of 3282 partition size fields is greater than the maximum number of additional partitions 3283 in the mode page, the second field is used. Otherwise the first field is used. 3284 3285 For Seagate DDS drives the page length must be 8 when no partitions is defined 3286 and 10 when 1 partition is defined (information from Eric Lee Green). This is 3287 is acceptable also to some other old drives and enforced if the first partition 3288 size field is used for the first additional partition size. 3289 */ 3290 static int partition_tape(struct scsi_tape *STp, int size) 3291 { 3292 int result; 3293 int pgo, psd_cnt, psdo; 3294 unsigned char *bp; 3295 3296 result = read_mode_page(STp, PART_PAGE, 0); 3297 if (result) { 3298 DEBC_printk(STp, "Can't read partition mode page.\n"); 3299 return result; 3300 } 3301 /* The mode page is in the buffer. Let's modify it and write it. */ 3302 bp = (STp->buffer)->b_data; 3303 pgo = MODE_HEADER_LENGTH + bp[MH_OFF_BDESCS_LENGTH]; 3304 DEBC_printk(STp, "Partition page length is %d bytes.\n", 3305 bp[pgo + MP_OFF_PAGE_LENGTH] + 2); 3306 3307 psd_cnt = (bp[pgo + MP_OFF_PAGE_LENGTH] + 2 - PART_PAGE_FIXED_LENGTH) / 2; 3308 psdo = pgo + PART_PAGE_FIXED_LENGTH; 3309 if (psd_cnt > bp[pgo + PP_OFF_MAX_ADD_PARTS]) { 3310 bp[psdo] = bp[psdo + 1] = 0xff; /* Rest of the tape */ 3311 psdo += 2; 3312 } 3313 memset(bp + psdo, 0, bp[pgo + PP_OFF_NBR_ADD_PARTS] * 2); 3314 3315 DEBC_printk(STp, "psd_cnt %d, max.parts %d, nbr_parts %d\n", 3316 psd_cnt, bp[pgo + PP_OFF_MAX_ADD_PARTS], 3317 bp[pgo + PP_OFF_NBR_ADD_PARTS]); 3318 3319 if (size <= 0) { 3320 bp[pgo + PP_OFF_NBR_ADD_PARTS] = 0; 3321 if (psd_cnt <= bp[pgo + PP_OFF_MAX_ADD_PARTS]) 3322 bp[pgo + MP_OFF_PAGE_LENGTH] = 6; 3323 DEBC_printk(STp, "Formatting tape with one partition.\n"); 3324 } else { 3325 bp[psdo] = (size >> 8) & 0xff; 3326 bp[psdo + 1] = size & 0xff; 3327 bp[pgo + 3] = 1; 3328 if (bp[pgo + MP_OFF_PAGE_LENGTH] < 8) 3329 bp[pgo + MP_OFF_PAGE_LENGTH] = 8; 3330 DEBC_printk(STp, "Formatting tape with two partitions " 3331 "(1 = %d MB).\n", size); 3332 } 3333 bp[pgo + PP_OFF_PART_UNITS] = 0; 3334 bp[pgo + PP_OFF_RESERVED] = 0; 3335 bp[pgo + PP_OFF_FLAGS] = PP_BIT_IDP | PP_MSK_PSUM_MB; 3336 3337 result = write_mode_page(STp, PART_PAGE, 1); 3338 if (result) { 3339 st_printk(KERN_INFO, STp, "Partitioning of tape failed.\n"); 3340 result = (-EIO); 3341 } 3342 3343 return result; 3344 } 3345 3346 3347 3348 /* The ioctl command */ 3349 static long st_ioctl(struct file *file, unsigned int cmd_in, unsigned long arg) 3350 { 3351 int i, cmd_nr, cmd_type, bt; 3352 int retval = 0; 3353 unsigned int blk; 3354 struct scsi_tape *STp = file->private_data; 3355 struct st_modedef *STm; 3356 struct st_partstat *STps; 3357 void __user *p = (void __user *)arg; 3358 3359 if (mutex_lock_interruptible(&STp->lock)) 3360 return -ERESTARTSYS; 3361 3362 DEB( 3363 if (debugging && !STp->in_use) { 3364 st_printk(ST_DEB_MSG, STp, "Incorrect device.\n"); 3365 retval = (-EIO); 3366 goto out; 3367 } ) /* end DEB */ 3368 3369 STm = &(STp->modes[STp->current_mode]); 3370 STps = &(STp->ps[STp->partition]); 3371 3372 /* 3373 * If we are in the middle of error recovery, don't let anyone 3374 * else try and use this device. Also, if error recovery fails, it 3375 * may try and take the device offline, in which case all further 3376 * access to the device is prohibited. 3377 */ 3378 retval = scsi_ioctl_block_when_processing_errors(STp->device, cmd_in, 3379 file->f_flags & O_NDELAY); 3380 if (retval) 3381 goto out; 3382 3383 cmd_type = _IOC_TYPE(cmd_in); 3384 cmd_nr = _IOC_NR(cmd_in); 3385 3386 if (cmd_type == _IOC_TYPE(MTIOCTOP) && cmd_nr == _IOC_NR(MTIOCTOP)) { 3387 struct mtop mtc; 3388 3389 if (_IOC_SIZE(cmd_in) != sizeof(mtc)) { 3390 retval = (-EINVAL); 3391 goto out; 3392 } 3393 3394 i = copy_from_user(&mtc, p, sizeof(struct mtop)); 3395 if (i) { 3396 retval = (-EFAULT); 3397 goto out; 3398 } 3399 3400 if (mtc.mt_op == MTSETDRVBUFFER && !capable(CAP_SYS_ADMIN)) { 3401 st_printk(KERN_WARNING, STp, 3402 "MTSETDRVBUFFER only allowed for root.\n"); 3403 retval = (-EPERM); 3404 goto out; 3405 } 3406 if (!STm->defined && 3407 (mtc.mt_op != MTSETDRVBUFFER && 3408 (mtc.mt_count & MT_ST_OPTIONS) == 0)) { 3409 retval = (-ENXIO); 3410 goto out; 3411 } 3412 3413 if (!STp->pos_unknown) { 3414 3415 if (STps->eof == ST_FM_HIT) { 3416 if (mtc.mt_op == MTFSF || mtc.mt_op == MTFSFM || 3417 mtc.mt_op == MTEOM) { 3418 mtc.mt_count -= 1; 3419 if (STps->drv_file >= 0) 3420 STps->drv_file += 1; 3421 } else if (mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM) { 3422 mtc.mt_count += 1; 3423 if (STps->drv_file >= 0) 3424 STps->drv_file += 1; 3425 } 3426 } 3427 3428 if (mtc.mt_op == MTSEEK) { 3429 /* Old position must be restored if partition will be 3430 changed */ 3431 i = !STp->can_partitions || 3432 (STp->new_partition != STp->partition); 3433 } else { 3434 i = mtc.mt_op == MTREW || mtc.mt_op == MTOFFL || 3435 mtc.mt_op == MTRETEN || mtc.mt_op == MTEOM || 3436 mtc.mt_op == MTLOCK || mtc.mt_op == MTLOAD || 3437 mtc.mt_op == MTFSF || mtc.mt_op == MTFSFM || 3438 mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM || 3439 mtc.mt_op == MTCOMPRESSION; 3440 } 3441 i = flush_buffer(STp, i); 3442 if (i < 0) { 3443 retval = i; 3444 goto out; 3445 } 3446 if (STps->rw == ST_WRITING && 3447 (mtc.mt_op == MTREW || mtc.mt_op == MTOFFL || 3448 mtc.mt_op == MTSEEK || 3449 mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM)) { 3450 i = st_int_ioctl(STp, MTWEOF, 1); 3451 if (i < 0) { 3452 retval = i; 3453 goto out; 3454 } 3455 if (mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM) 3456 mtc.mt_count++; 3457 STps->rw = ST_IDLE; 3458 } 3459 3460 } else { 3461 /* 3462 * If there was a bus reset, block further access 3463 * to this device. If the user wants to rewind the tape, 3464 * then reset the flag and allow access again. 3465 */ 3466 if (mtc.mt_op != MTREW && 3467 mtc.mt_op != MTOFFL && 3468 mtc.mt_op != MTRETEN && 3469 mtc.mt_op != MTERASE && 3470 mtc.mt_op != MTSEEK && 3471 mtc.mt_op != MTEOM) { 3472 retval = (-EIO); 3473 goto out; 3474 } 3475 reset_state(STp); 3476 /* remove this when the midlevel properly clears was_reset */ 3477 STp->device->was_reset = 0; 3478 } 3479 3480 if (mtc.mt_op != MTNOP && mtc.mt_op != MTSETBLK && 3481 mtc.mt_op != MTSETDENSITY && mtc.mt_op != MTWSM && 3482 mtc.mt_op != MTSETDRVBUFFER && mtc.mt_op != MTSETPART) 3483 STps->rw = ST_IDLE; /* Prevent automatic WEOF and fsf */ 3484 3485 if (mtc.mt_op == MTOFFL && STp->door_locked != ST_UNLOCKED) 3486 do_door_lock(STp, 0); /* Ignore result! */ 3487 3488 if (mtc.mt_op == MTSETDRVBUFFER && 3489 (mtc.mt_count & MT_ST_OPTIONS) != 0) { 3490 retval = st_set_options(STp, mtc.mt_count); 3491 goto out; 3492 } 3493 3494 if (mtc.mt_op == MTSETPART) { 3495 if (!STp->can_partitions || 3496 mtc.mt_count < 0 || mtc.mt_count >= ST_NBR_PARTITIONS) { 3497 retval = (-EINVAL); 3498 goto out; 3499 } 3500 if (mtc.mt_count >= STp->nbr_partitions && 3501 (STp->nbr_partitions = nbr_partitions(STp)) < 0) { 3502 retval = (-EIO); 3503 goto out; 3504 } 3505 if (mtc.mt_count >= STp->nbr_partitions) { 3506 retval = (-EINVAL); 3507 goto out; 3508 } 3509 STp->new_partition = mtc.mt_count; 3510 retval = 0; 3511 goto out; 3512 } 3513 3514 if (mtc.mt_op == MTMKPART) { 3515 if (!STp->can_partitions) { 3516 retval = (-EINVAL); 3517 goto out; 3518 } 3519 if ((i = st_int_ioctl(STp, MTREW, 0)) < 0 || 3520 (i = partition_tape(STp, mtc.mt_count)) < 0) { 3521 retval = i; 3522 goto out; 3523 } 3524 for (i = 0; i < ST_NBR_PARTITIONS; i++) { 3525 STp->ps[i].rw = ST_IDLE; 3526 STp->ps[i].at_sm = 0; 3527 STp->ps[i].last_block_valid = 0; 3528 } 3529 STp->partition = STp->new_partition = 0; 3530 STp->nbr_partitions = 1; /* Bad guess ?-) */ 3531 STps->drv_block = STps->drv_file = 0; 3532 retval = 0; 3533 goto out; 3534 } 3535 3536 if (mtc.mt_op == MTSEEK) { 3537 i = set_location(STp, mtc.mt_count, STp->new_partition, 0); 3538 if (!STp->can_partitions) 3539 STp->ps[0].rw = ST_IDLE; 3540 retval = i; 3541 goto out; 3542 } 3543 3544 if (mtc.mt_op == MTUNLOAD || mtc.mt_op == MTOFFL) { 3545 retval = do_load_unload(STp, file, 0); 3546 goto out; 3547 } 3548 3549 if (mtc.mt_op == MTLOAD) { 3550 retval = do_load_unload(STp, file, max(1, mtc.mt_count)); 3551 goto out; 3552 } 3553 3554 if (mtc.mt_op == MTLOCK || mtc.mt_op == MTUNLOCK) { 3555 retval = do_door_lock(STp, (mtc.mt_op == MTLOCK)); 3556 goto out; 3557 } 3558 3559 if (STp->can_partitions && STp->ready == ST_READY && 3560 (i = switch_partition(STp)) < 0) { 3561 retval = i; 3562 goto out; 3563 } 3564 3565 if (mtc.mt_op == MTCOMPRESSION) 3566 retval = st_compression(STp, (mtc.mt_count & 1)); 3567 else 3568 retval = st_int_ioctl(STp, mtc.mt_op, mtc.mt_count); 3569 goto out; 3570 } 3571 if (!STm->defined) { 3572 retval = (-ENXIO); 3573 goto out; 3574 } 3575 3576 if ((i = flush_buffer(STp, 0)) < 0) { 3577 retval = i; 3578 goto out; 3579 } 3580 if (STp->can_partitions && 3581 (i = switch_partition(STp)) < 0) { 3582 retval = i; 3583 goto out; 3584 } 3585 3586 if (cmd_type == _IOC_TYPE(MTIOCGET) && cmd_nr == _IOC_NR(MTIOCGET)) { 3587 struct mtget mt_status; 3588 3589 if (_IOC_SIZE(cmd_in) != sizeof(struct mtget)) { 3590 retval = (-EINVAL); 3591 goto out; 3592 } 3593 3594 mt_status.mt_type = STp->tape_type; 3595 mt_status.mt_dsreg = 3596 ((STp->block_size << MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK) | 3597 ((STp->density << MT_ST_DENSITY_SHIFT) & MT_ST_DENSITY_MASK); 3598 mt_status.mt_blkno = STps->drv_block; 3599 mt_status.mt_fileno = STps->drv_file; 3600 if (STp->block_size != 0) { 3601 if (STps->rw == ST_WRITING) 3602 mt_status.mt_blkno += 3603 (STp->buffer)->buffer_bytes / STp->block_size; 3604 else if (STps->rw == ST_READING) 3605 mt_status.mt_blkno -= 3606 ((STp->buffer)->buffer_bytes + 3607 STp->block_size - 1) / STp->block_size; 3608 } 3609 3610 mt_status.mt_gstat = 0; 3611 if (STp->drv_write_prot) 3612 mt_status.mt_gstat |= GMT_WR_PROT(0xffffffff); 3613 if (mt_status.mt_blkno == 0) { 3614 if (mt_status.mt_fileno == 0) 3615 mt_status.mt_gstat |= GMT_BOT(0xffffffff); 3616 else 3617 mt_status.mt_gstat |= GMT_EOF(0xffffffff); 3618 } 3619 mt_status.mt_erreg = (STp->recover_reg << MT_ST_SOFTERR_SHIFT); 3620 mt_status.mt_resid = STp->partition; 3621 if (STps->eof == ST_EOM_OK || STps->eof == ST_EOM_ERROR) 3622 mt_status.mt_gstat |= GMT_EOT(0xffffffff); 3623 else if (STps->eof >= ST_EOM_OK) 3624 mt_status.mt_gstat |= GMT_EOD(0xffffffff); 3625 if (STp->density == 1) 3626 mt_status.mt_gstat |= GMT_D_800(0xffffffff); 3627 else if (STp->density == 2) 3628 mt_status.mt_gstat |= GMT_D_1600(0xffffffff); 3629 else if (STp->density == 3) 3630 mt_status.mt_gstat |= GMT_D_6250(0xffffffff); 3631 if (STp->ready == ST_READY) 3632 mt_status.mt_gstat |= GMT_ONLINE(0xffffffff); 3633 if (STp->ready == ST_NO_TAPE) 3634 mt_status.mt_gstat |= GMT_DR_OPEN(0xffffffff); 3635 if (STps->at_sm) 3636 mt_status.mt_gstat |= GMT_SM(0xffffffff); 3637 if (STm->do_async_writes || 3638 (STm->do_buffer_writes && STp->block_size != 0) || 3639 STp->drv_buffer != 0) 3640 mt_status.mt_gstat |= GMT_IM_REP_EN(0xffffffff); 3641 if (STp->cleaning_req) 3642 mt_status.mt_gstat |= GMT_CLN(0xffffffff); 3643 3644 i = copy_to_user(p, &mt_status, sizeof(struct mtget)); 3645 if (i) { 3646 retval = (-EFAULT); 3647 goto out; 3648 } 3649 3650 STp->recover_reg = 0; /* Clear after read */ 3651 retval = 0; 3652 goto out; 3653 } /* End of MTIOCGET */ 3654 if (cmd_type == _IOC_TYPE(MTIOCPOS) && cmd_nr == _IOC_NR(MTIOCPOS)) { 3655 struct mtpos mt_pos; 3656 if (_IOC_SIZE(cmd_in) != sizeof(struct mtpos)) { 3657 retval = (-EINVAL); 3658 goto out; 3659 } 3660 if ((i = get_location(STp, &blk, &bt, 0)) < 0) { 3661 retval = i; 3662 goto out; 3663 } 3664 mt_pos.mt_blkno = blk; 3665 i = copy_to_user(p, &mt_pos, sizeof(struct mtpos)); 3666 if (i) 3667 retval = (-EFAULT); 3668 goto out; 3669 } 3670 mutex_unlock(&STp->lock); 3671 switch (cmd_in) { 3672 case SCSI_IOCTL_GET_IDLUN: 3673 case SCSI_IOCTL_GET_BUS_NUMBER: 3674 break; 3675 default: 3676 if ((cmd_in == SG_IO || 3677 cmd_in == SCSI_IOCTL_SEND_COMMAND || 3678 cmd_in == CDROM_SEND_PACKET) && 3679 !capable(CAP_SYS_RAWIO)) 3680 i = -EPERM; 3681 else 3682 i = scsi_cmd_ioctl(STp->disk->queue, STp->disk, 3683 file->f_mode, cmd_in, p); 3684 if (i != -ENOTTY) 3685 return i; 3686 break; 3687 } 3688 retval = scsi_ioctl(STp->device, cmd_in, p); 3689 if (!retval && cmd_in == SCSI_IOCTL_STOP_UNIT) { /* unload */ 3690 STp->rew_at_close = 0; 3691 STp->ready = ST_NO_TAPE; 3692 } 3693 return retval; 3694 3695 out: 3696 mutex_unlock(&STp->lock); 3697 return retval; 3698 } 3699 3700 #ifdef CONFIG_COMPAT 3701 static long st_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg) 3702 { 3703 struct scsi_tape *STp = file->private_data; 3704 struct scsi_device *sdev = STp->device; 3705 int ret = -ENOIOCTLCMD; 3706 if (sdev->host->hostt->compat_ioctl) { 3707 3708 ret = sdev->host->hostt->compat_ioctl(sdev, cmd, (void __user *)arg); 3709 3710 } 3711 return ret; 3712 } 3713 #endif 3714 3715 3716 3717 /* Try to allocate a new tape buffer. Calling function must not hold 3718 dev_arr_lock. */ 3719 static struct st_buffer *new_tape_buffer(int need_dma, int max_sg) 3720 { 3721 struct st_buffer *tb; 3722 3723 tb = kzalloc(sizeof(struct st_buffer), GFP_ATOMIC); 3724 if (!tb) { 3725 printk(KERN_NOTICE "st: Can't allocate new tape buffer.\n"); 3726 return NULL; 3727 } 3728 tb->frp_segs = 0; 3729 tb->use_sg = max_sg; 3730 tb->dma = need_dma; 3731 tb->buffer_size = 0; 3732 3733 tb->reserved_pages = kzalloc(max_sg * sizeof(struct page *), 3734 GFP_ATOMIC); 3735 if (!tb->reserved_pages) { 3736 kfree(tb); 3737 return NULL; 3738 } 3739 3740 return tb; 3741 } 3742 3743 3744 /* Try to allocate enough space in the tape buffer */ 3745 #define ST_MAX_ORDER 6 3746 3747 static int enlarge_buffer(struct st_buffer * STbuffer, int new_size, int need_dma) 3748 { 3749 int segs, max_segs, b_size, order, got; 3750 gfp_t priority; 3751 3752 if (new_size <= STbuffer->buffer_size) 3753 return 1; 3754 3755 if (STbuffer->buffer_size <= PAGE_SIZE) 3756 normalize_buffer(STbuffer); /* Avoid extra segment */ 3757 3758 max_segs = STbuffer->use_sg; 3759 3760 priority = GFP_KERNEL | __GFP_NOWARN; 3761 if (need_dma) 3762 priority |= GFP_DMA; 3763 3764 if (STbuffer->cleared) 3765 priority |= __GFP_ZERO; 3766 3767 if (STbuffer->frp_segs) { 3768 order = STbuffer->reserved_page_order; 3769 b_size = PAGE_SIZE << order; 3770 } else { 3771 for (b_size = PAGE_SIZE, order = 0; 3772 order < ST_MAX_ORDER && 3773 max_segs * (PAGE_SIZE << order) < new_size; 3774 order++, b_size *= 2) 3775 ; /* empty */ 3776 STbuffer->reserved_page_order = order; 3777 } 3778 if (max_segs * (PAGE_SIZE << order) < new_size) { 3779 if (order == ST_MAX_ORDER) 3780 return 0; 3781 normalize_buffer(STbuffer); 3782 return enlarge_buffer(STbuffer, new_size, need_dma); 3783 } 3784 3785 for (segs = STbuffer->frp_segs, got = STbuffer->buffer_size; 3786 segs < max_segs && got < new_size;) { 3787 struct page *page; 3788 3789 page = alloc_pages(priority, order); 3790 if (!page) { 3791 DEB(STbuffer->buffer_size = got); 3792 normalize_buffer(STbuffer); 3793 return 0; 3794 } 3795 3796 STbuffer->frp_segs += 1; 3797 got += b_size; 3798 STbuffer->buffer_size = got; 3799 STbuffer->reserved_pages[segs] = page; 3800 segs++; 3801 } 3802 STbuffer->b_data = page_address(STbuffer->reserved_pages[0]); 3803 3804 return 1; 3805 } 3806 3807 3808 /* Make sure that no data from previous user is in the internal buffer */ 3809 static void clear_buffer(struct st_buffer * st_bp) 3810 { 3811 int i; 3812 3813 for (i=0; i < st_bp->frp_segs; i++) 3814 memset(page_address(st_bp->reserved_pages[i]), 0, 3815 PAGE_SIZE << st_bp->reserved_page_order); 3816 st_bp->cleared = 1; 3817 } 3818 3819 3820 /* Release the extra buffer */ 3821 static void normalize_buffer(struct st_buffer * STbuffer) 3822 { 3823 int i, order = STbuffer->reserved_page_order; 3824 3825 for (i = 0; i < STbuffer->frp_segs; i++) { 3826 __free_pages(STbuffer->reserved_pages[i], order); 3827 STbuffer->buffer_size -= (PAGE_SIZE << order); 3828 } 3829 STbuffer->frp_segs = 0; 3830 STbuffer->sg_segs = 0; 3831 STbuffer->reserved_page_order = 0; 3832 STbuffer->map_data.offset = 0; 3833 } 3834 3835 3836 /* Move data from the user buffer to the tape buffer. Returns zero (success) or 3837 negative error code. */ 3838 static int append_to_buffer(const char __user *ubp, struct st_buffer * st_bp, int do_count) 3839 { 3840 int i, cnt, res, offset; 3841 int length = PAGE_SIZE << st_bp->reserved_page_order; 3842 3843 for (i = 0, offset = st_bp->buffer_bytes; 3844 i < st_bp->frp_segs && offset >= length; i++) 3845 offset -= length; 3846 if (i == st_bp->frp_segs) { /* Should never happen */ 3847 printk(KERN_WARNING "st: append_to_buffer offset overflow.\n"); 3848 return (-EIO); 3849 } 3850 for (; i < st_bp->frp_segs && do_count > 0; i++) { 3851 struct page *page = st_bp->reserved_pages[i]; 3852 cnt = length - offset < do_count ? length - offset : do_count; 3853 res = copy_from_user(page_address(page) + offset, ubp, cnt); 3854 if (res) 3855 return (-EFAULT); 3856 do_count -= cnt; 3857 st_bp->buffer_bytes += cnt; 3858 ubp += cnt; 3859 offset = 0; 3860 } 3861 if (do_count) /* Should never happen */ 3862 return (-EIO); 3863 3864 return 0; 3865 } 3866 3867 3868 /* Move data from the tape buffer to the user buffer. Returns zero (success) or 3869 negative error code. */ 3870 static int from_buffer(struct st_buffer * st_bp, char __user *ubp, int do_count) 3871 { 3872 int i, cnt, res, offset; 3873 int length = PAGE_SIZE << st_bp->reserved_page_order; 3874 3875 for (i = 0, offset = st_bp->read_pointer; 3876 i < st_bp->frp_segs && offset >= length; i++) 3877 offset -= length; 3878 if (i == st_bp->frp_segs) { /* Should never happen */ 3879 printk(KERN_WARNING "st: from_buffer offset overflow.\n"); 3880 return (-EIO); 3881 } 3882 for (; i < st_bp->frp_segs && do_count > 0; i++) { 3883 struct page *page = st_bp->reserved_pages[i]; 3884 cnt = length - offset < do_count ? length - offset : do_count; 3885 res = copy_to_user(ubp, page_address(page) + offset, cnt); 3886 if (res) 3887 return (-EFAULT); 3888 do_count -= cnt; 3889 st_bp->buffer_bytes -= cnt; 3890 st_bp->read_pointer += cnt; 3891 ubp += cnt; 3892 offset = 0; 3893 } 3894 if (do_count) /* Should never happen */ 3895 return (-EIO); 3896 3897 return 0; 3898 } 3899 3900 3901 /* Move data towards start of buffer */ 3902 static void move_buffer_data(struct st_buffer * st_bp, int offset) 3903 { 3904 int src_seg, dst_seg, src_offset = 0, dst_offset; 3905 int count, total; 3906 int length = PAGE_SIZE << st_bp->reserved_page_order; 3907 3908 if (offset == 0) 3909 return; 3910 3911 total=st_bp->buffer_bytes - offset; 3912 for (src_seg=0; src_seg < st_bp->frp_segs; src_seg++) { 3913 src_offset = offset; 3914 if (src_offset < length) 3915 break; 3916 offset -= length; 3917 } 3918 3919 st_bp->buffer_bytes = st_bp->read_pointer = total; 3920 for (dst_seg=dst_offset=0; total > 0; ) { 3921 struct page *dpage = st_bp->reserved_pages[dst_seg]; 3922 struct page *spage = st_bp->reserved_pages[src_seg]; 3923 3924 count = min(length - dst_offset, length - src_offset); 3925 memmove(page_address(dpage) + dst_offset, 3926 page_address(spage) + src_offset, count); 3927 src_offset += count; 3928 if (src_offset >= length) { 3929 src_seg++; 3930 src_offset = 0; 3931 } 3932 dst_offset += count; 3933 if (dst_offset >= length) { 3934 dst_seg++; 3935 dst_offset = 0; 3936 } 3937 total -= count; 3938 } 3939 } 3940 3941 /* Validate the options from command line or module parameters */ 3942 static void validate_options(void) 3943 { 3944 if (buffer_kbs > 0) 3945 st_fixed_buffer_size = buffer_kbs * ST_KILOBYTE; 3946 if (max_sg_segs >= ST_FIRST_SG) 3947 st_max_sg_segs = max_sg_segs; 3948 } 3949 3950 #ifndef MODULE 3951 /* Set the boot options. Syntax is defined in Documenation/scsi/st.txt. 3952 */ 3953 static int __init st_setup(char *str) 3954 { 3955 int i, len, ints[5]; 3956 char *stp; 3957 3958 stp = get_options(str, ARRAY_SIZE(ints), ints); 3959 3960 if (ints[0] > 0) { 3961 for (i = 0; i < ints[0] && i < ARRAY_SIZE(parms); i++) 3962 if (parms[i].val) 3963 *parms[i].val = ints[i + 1]; 3964 } else { 3965 while (stp != NULL) { 3966 for (i = 0; i < ARRAY_SIZE(parms); i++) { 3967 len = strlen(parms[i].name); 3968 if (!strncmp(stp, parms[i].name, len) && 3969 (*(stp + len) == ':' || *(stp + len) == '=')) { 3970 if (parms[i].val) 3971 *parms[i].val = 3972 simple_strtoul(stp + len + 1, NULL, 0); 3973 else 3974 printk(KERN_WARNING "st: Obsolete parameter %s\n", 3975 parms[i].name); 3976 break; 3977 } 3978 } 3979 if (i >= ARRAY_SIZE(parms)) 3980 printk(KERN_WARNING "st: invalid parameter in '%s'\n", 3981 stp); 3982 stp = strchr(stp, ','); 3983 if (stp) 3984 stp++; 3985 } 3986 } 3987 3988 validate_options(); 3989 3990 return 1; 3991 } 3992 3993 __setup("st=", st_setup); 3994 3995 #endif 3996 3997 static const struct file_operations st_fops = 3998 { 3999 .owner = THIS_MODULE, 4000 .read = st_read, 4001 .write = st_write, 4002 .unlocked_ioctl = st_ioctl, 4003 #ifdef CONFIG_COMPAT 4004 .compat_ioctl = st_compat_ioctl, 4005 #endif 4006 .open = st_open, 4007 .flush = st_flush, 4008 .release = st_release, 4009 .llseek = noop_llseek, 4010 }; 4011 4012 static int create_one_cdev(struct scsi_tape *tape, int mode, int rew) 4013 { 4014 int i, error; 4015 dev_t cdev_devno; 4016 struct cdev *cdev; 4017 struct device *dev; 4018 struct st_modedef *STm = &(tape->modes[mode]); 4019 char name[10]; 4020 int dev_num = tape->index; 4021 4022 cdev_devno = MKDEV(SCSI_TAPE_MAJOR, TAPE_MINOR(dev_num, mode, rew)); 4023 4024 cdev = cdev_alloc(); 4025 if (!cdev) { 4026 pr_err("st%d: out of memory. Device not attached.\n", dev_num); 4027 error = -ENOMEM; 4028 goto out; 4029 } 4030 cdev->owner = THIS_MODULE; 4031 cdev->ops = &st_fops; 4032 4033 error = cdev_add(cdev, cdev_devno, 1); 4034 if (error) { 4035 pr_err("st%d: Can't add %s-rewind mode %d\n", dev_num, 4036 rew ? "non" : "auto", mode); 4037 pr_err("st%d: Device not attached.\n", dev_num); 4038 goto out_free; 4039 } 4040 STm->cdevs[rew] = cdev; 4041 4042 i = mode << (4 - ST_NBR_MODE_BITS); 4043 snprintf(name, 10, "%s%s%s", rew ? "n" : "", 4044 tape->disk->disk_name, st_formats[i]); 4045 4046 dev = device_create(&st_sysfs_class, &tape->device->sdev_gendev, 4047 cdev_devno, &tape->modes[mode], "%s", name); 4048 if (IS_ERR(dev)) { 4049 pr_err("st%d: device_create failed\n", dev_num); 4050 error = PTR_ERR(dev); 4051 goto out_free; 4052 } 4053 4054 STm->devs[rew] = dev; 4055 4056 return 0; 4057 out_free: 4058 cdev_del(STm->cdevs[rew]); 4059 STm->cdevs[rew] = NULL; 4060 out: 4061 return error; 4062 } 4063 4064 static int create_cdevs(struct scsi_tape *tape) 4065 { 4066 int mode, error; 4067 for (mode = 0; mode < ST_NBR_MODES; ++mode) { 4068 error = create_one_cdev(tape, mode, 0); 4069 if (error) 4070 return error; 4071 error = create_one_cdev(tape, mode, 1); 4072 if (error) 4073 return error; 4074 } 4075 4076 return sysfs_create_link(&tape->device->sdev_gendev.kobj, 4077 &tape->modes[0].devs[0]->kobj, "tape"); 4078 } 4079 4080 static void remove_cdevs(struct scsi_tape *tape) 4081 { 4082 int mode, rew; 4083 sysfs_remove_link(&tape->device->sdev_gendev.kobj, "tape"); 4084 for (mode = 0; mode < ST_NBR_MODES; mode++) { 4085 struct st_modedef *STm = &(tape->modes[mode]); 4086 for (rew = 0; rew < 2; rew++) { 4087 if (STm->cdevs[rew]) 4088 cdev_del(STm->cdevs[rew]); 4089 if (STm->devs[rew]) 4090 device_unregister(STm->devs[rew]); 4091 } 4092 } 4093 } 4094 4095 static int st_probe(struct device *dev) 4096 { 4097 struct scsi_device *SDp = to_scsi_device(dev); 4098 struct gendisk *disk = NULL; 4099 struct scsi_tape *tpnt = NULL; 4100 struct st_modedef *STm; 4101 struct st_partstat *STps; 4102 struct st_buffer *buffer; 4103 int i, error; 4104 char *stp; 4105 4106 if (SDp->type != TYPE_TAPE) 4107 return -ENODEV; 4108 if ((stp = st_incompatible(SDp))) { 4109 sdev_printk(KERN_INFO, SDp, "Found incompatible tape\n"); 4110 sdev_printk(KERN_INFO, SDp, 4111 "st: The suggested driver is %s.\n", stp); 4112 return -ENODEV; 4113 } 4114 4115 scsi_autopm_get_device(SDp); 4116 i = queue_max_segments(SDp->request_queue); 4117 if (st_max_sg_segs < i) 4118 i = st_max_sg_segs; 4119 buffer = new_tape_buffer((SDp->host)->unchecked_isa_dma, i); 4120 if (buffer == NULL) { 4121 sdev_printk(KERN_ERR, SDp, 4122 "st: Can't allocate new tape buffer. " 4123 "Device not attached.\n"); 4124 goto out; 4125 } 4126 4127 disk = alloc_disk(1); 4128 if (!disk) { 4129 sdev_printk(KERN_ERR, SDp, 4130 "st: out of memory. Device not attached.\n"); 4131 goto out_buffer_free; 4132 } 4133 4134 tpnt = kzalloc(sizeof(struct scsi_tape), GFP_ATOMIC); 4135 if (tpnt == NULL) { 4136 sdev_printk(KERN_ERR, SDp, 4137 "st: Can't allocate device descriptor.\n"); 4138 goto out_put_disk; 4139 } 4140 kref_init(&tpnt->kref); 4141 tpnt->disk = disk; 4142 disk->private_data = &tpnt->driver; 4143 disk->queue = SDp->request_queue; 4144 /* SCSI tape doesn't register this gendisk via add_disk(). Manually 4145 * take queue reference that release_disk() expects. */ 4146 if (!blk_get_queue(disk->queue)) 4147 goto out_put_disk; 4148 tpnt->driver = &st_template; 4149 4150 tpnt->device = SDp; 4151 if (SDp->scsi_level <= 2) 4152 tpnt->tape_type = MT_ISSCSI1; 4153 else 4154 tpnt->tape_type = MT_ISSCSI2; 4155 4156 tpnt->buffer = buffer; 4157 tpnt->buffer->last_SRpnt = NULL; 4158 4159 tpnt->inited = 0; 4160 tpnt->dirty = 0; 4161 tpnt->in_use = 0; 4162 tpnt->drv_buffer = 1; /* Try buffering if no mode sense */ 4163 tpnt->restr_dma = (SDp->host)->unchecked_isa_dma; 4164 tpnt->use_pf = (SDp->scsi_level >= SCSI_2); 4165 tpnt->density = 0; 4166 tpnt->do_auto_lock = ST_AUTO_LOCK; 4167 tpnt->can_bsr = (SDp->scsi_level > 2 ? 1 : ST_IN_FILE_POS); /* BSR mandatory in SCSI3 */ 4168 tpnt->can_partitions = 0; 4169 tpnt->two_fm = ST_TWO_FM; 4170 tpnt->fast_mteom = ST_FAST_MTEOM; 4171 tpnt->scsi2_logical = ST_SCSI2LOGICAL; 4172 tpnt->sili = ST_SILI; 4173 tpnt->immediate = ST_NOWAIT; 4174 tpnt->immediate_filemark = 0; 4175 tpnt->default_drvbuffer = 0xff; /* No forced buffering */ 4176 tpnt->partition = 0; 4177 tpnt->new_partition = 0; 4178 tpnt->nbr_partitions = 0; 4179 blk_queue_rq_timeout(tpnt->device->request_queue, ST_TIMEOUT); 4180 tpnt->long_timeout = ST_LONG_TIMEOUT; 4181 tpnt->try_dio = try_direct_io && !SDp->host->unchecked_isa_dma; 4182 4183 for (i = 0; i < ST_NBR_MODES; i++) { 4184 STm = &(tpnt->modes[i]); 4185 STm->defined = 0; 4186 STm->sysv = ST_SYSV; 4187 STm->defaults_for_writes = 0; 4188 STm->do_async_writes = ST_ASYNC_WRITES; 4189 STm->do_buffer_writes = ST_BUFFER_WRITES; 4190 STm->do_read_ahead = ST_READ_AHEAD; 4191 STm->default_compression = ST_DONT_TOUCH; 4192 STm->default_blksize = (-1); /* No forced size */ 4193 STm->default_density = (-1); /* No forced density */ 4194 STm->tape = tpnt; 4195 } 4196 4197 for (i = 0; i < ST_NBR_PARTITIONS; i++) { 4198 STps = &(tpnt->ps[i]); 4199 STps->rw = ST_IDLE; 4200 STps->eof = ST_NOEOF; 4201 STps->at_sm = 0; 4202 STps->last_block_valid = 0; 4203 STps->drv_block = (-1); 4204 STps->drv_file = (-1); 4205 } 4206 4207 tpnt->current_mode = 0; 4208 tpnt->modes[0].defined = 1; 4209 4210 tpnt->density_changed = tpnt->compression_changed = 4211 tpnt->blksize_changed = 0; 4212 mutex_init(&tpnt->lock); 4213 4214 idr_preload(GFP_KERNEL); 4215 spin_lock(&st_index_lock); 4216 error = idr_alloc(&st_index_idr, tpnt, 0, ST_MAX_TAPES + 1, GFP_NOWAIT); 4217 spin_unlock(&st_index_lock); 4218 idr_preload_end(); 4219 if (error < 0) { 4220 pr_warn("st: idr allocation failed: %d\n", error); 4221 goto out_put_queue; 4222 } 4223 tpnt->index = error; 4224 sprintf(disk->disk_name, "st%d", tpnt->index); 4225 4226 dev_set_drvdata(dev, tpnt); 4227 4228 4229 error = create_cdevs(tpnt); 4230 if (error) 4231 goto out_remove_devs; 4232 scsi_autopm_put_device(SDp); 4233 4234 sdev_printk(KERN_NOTICE, SDp, 4235 "Attached scsi tape %s\n", tape_name(tpnt)); 4236 sdev_printk(KERN_INFO, SDp, "%s: try direct i/o: %s (alignment %d B)\n", 4237 tape_name(tpnt), tpnt->try_dio ? "yes" : "no", 4238 queue_dma_alignment(SDp->request_queue) + 1); 4239 4240 return 0; 4241 4242 out_remove_devs: 4243 remove_cdevs(tpnt); 4244 spin_lock(&st_index_lock); 4245 idr_remove(&st_index_idr, tpnt->index); 4246 spin_unlock(&st_index_lock); 4247 out_put_queue: 4248 blk_put_queue(disk->queue); 4249 out_put_disk: 4250 put_disk(disk); 4251 kfree(tpnt); 4252 out_buffer_free: 4253 kfree(buffer); 4254 out: 4255 scsi_autopm_put_device(SDp); 4256 return -ENODEV; 4257 }; 4258 4259 4260 static int st_remove(struct device *dev) 4261 { 4262 struct scsi_tape *tpnt = dev_get_drvdata(dev); 4263 int index = tpnt->index; 4264 4265 scsi_autopm_get_device(to_scsi_device(dev)); 4266 remove_cdevs(tpnt); 4267 4268 mutex_lock(&st_ref_mutex); 4269 kref_put(&tpnt->kref, scsi_tape_release); 4270 mutex_unlock(&st_ref_mutex); 4271 spin_lock(&st_index_lock); 4272 idr_remove(&st_index_idr, index); 4273 spin_unlock(&st_index_lock); 4274 return 0; 4275 } 4276 4277 /** 4278 * scsi_tape_release - Called to free the Scsi_Tape structure 4279 * @kref: pointer to embedded kref 4280 * 4281 * st_ref_mutex must be held entering this routine. Because it is 4282 * called on last put, you should always use the scsi_tape_get() 4283 * scsi_tape_put() helpers which manipulate the semaphore directly 4284 * and never do a direct kref_put(). 4285 **/ 4286 static void scsi_tape_release(struct kref *kref) 4287 { 4288 struct scsi_tape *tpnt = to_scsi_tape(kref); 4289 struct gendisk *disk = tpnt->disk; 4290 4291 tpnt->device = NULL; 4292 4293 if (tpnt->buffer) { 4294 normalize_buffer(tpnt->buffer); 4295 kfree(tpnt->buffer->reserved_pages); 4296 kfree(tpnt->buffer); 4297 } 4298 4299 disk->private_data = NULL; 4300 put_disk(disk); 4301 kfree(tpnt); 4302 return; 4303 } 4304 4305 static struct class st_sysfs_class = { 4306 .name = "scsi_tape", 4307 .dev_groups = st_dev_groups, 4308 }; 4309 4310 static int __init init_st(void) 4311 { 4312 int err; 4313 4314 validate_options(); 4315 4316 printk(KERN_INFO "st: Version %s, fixed bufsize %d, s/g segs %d\n", 4317 verstr, st_fixed_buffer_size, st_max_sg_segs); 4318 4319 debugging = (debug_flag > 0) ? debug_flag : NO_DEBUG; 4320 if (debugging) { 4321 printk(KERN_INFO "st: Debugging enabled debug_flag = %d\n", 4322 debugging); 4323 } 4324 4325 err = class_register(&st_sysfs_class); 4326 if (err) { 4327 pr_err("Unable register sysfs class for SCSI tapes\n"); 4328 return err; 4329 } 4330 4331 err = register_chrdev_region(MKDEV(SCSI_TAPE_MAJOR, 0), 4332 ST_MAX_TAPE_ENTRIES, "st"); 4333 if (err) { 4334 printk(KERN_ERR "Unable to get major %d for SCSI tapes\n", 4335 SCSI_TAPE_MAJOR); 4336 goto err_class; 4337 } 4338 4339 err = scsi_register_driver(&st_template.gendrv); 4340 if (err) 4341 goto err_chrdev; 4342 4343 err = do_create_sysfs_files(); 4344 if (err) 4345 goto err_scsidrv; 4346 4347 return 0; 4348 4349 err_scsidrv: 4350 scsi_unregister_driver(&st_template.gendrv); 4351 err_chrdev: 4352 unregister_chrdev_region(MKDEV(SCSI_TAPE_MAJOR, 0), 4353 ST_MAX_TAPE_ENTRIES); 4354 err_class: 4355 class_unregister(&st_sysfs_class); 4356 return err; 4357 } 4358 4359 static void __exit exit_st(void) 4360 { 4361 do_remove_sysfs_files(); 4362 scsi_unregister_driver(&st_template.gendrv); 4363 unregister_chrdev_region(MKDEV(SCSI_TAPE_MAJOR, 0), 4364 ST_MAX_TAPE_ENTRIES); 4365 class_unregister(&st_sysfs_class); 4366 printk(KERN_INFO "st: Unloaded.\n"); 4367 } 4368 4369 module_init(init_st); 4370 module_exit(exit_st); 4371 4372 4373 /* The sysfs driver interface. Read-only at the moment */ 4374 static ssize_t st_try_direct_io_show(struct device_driver *ddp, char *buf) 4375 { 4376 return snprintf(buf, PAGE_SIZE, "%d\n", try_direct_io); 4377 } 4378 static DRIVER_ATTR(try_direct_io, S_IRUGO, st_try_direct_io_show, NULL); 4379 4380 static ssize_t st_fixed_buffer_size_show(struct device_driver *ddp, char *buf) 4381 { 4382 return snprintf(buf, PAGE_SIZE, "%d\n", st_fixed_buffer_size); 4383 } 4384 static DRIVER_ATTR(fixed_buffer_size, S_IRUGO, st_fixed_buffer_size_show, NULL); 4385 4386 static ssize_t st_max_sg_segs_show(struct device_driver *ddp, char *buf) 4387 { 4388 return snprintf(buf, PAGE_SIZE, "%d\n", st_max_sg_segs); 4389 } 4390 static DRIVER_ATTR(max_sg_segs, S_IRUGO, st_max_sg_segs_show, NULL); 4391 4392 static ssize_t st_version_show(struct device_driver *ddd, char *buf) 4393 { 4394 return snprintf(buf, PAGE_SIZE, "[%s]\n", verstr); 4395 } 4396 static DRIVER_ATTR(version, S_IRUGO, st_version_show, NULL); 4397 4398 static int do_create_sysfs_files(void) 4399 { 4400 struct device_driver *sysfs = &st_template.gendrv; 4401 int err; 4402 4403 err = driver_create_file(sysfs, &driver_attr_try_direct_io); 4404 if (err) 4405 return err; 4406 err = driver_create_file(sysfs, &driver_attr_fixed_buffer_size); 4407 if (err) 4408 goto err_try_direct_io; 4409 err = driver_create_file(sysfs, &driver_attr_max_sg_segs); 4410 if (err) 4411 goto err_attr_fixed_buf; 4412 err = driver_create_file(sysfs, &driver_attr_version); 4413 if (err) 4414 goto err_attr_max_sg; 4415 4416 return 0; 4417 4418 err_attr_max_sg: 4419 driver_remove_file(sysfs, &driver_attr_max_sg_segs); 4420 err_attr_fixed_buf: 4421 driver_remove_file(sysfs, &driver_attr_fixed_buffer_size); 4422 err_try_direct_io: 4423 driver_remove_file(sysfs, &driver_attr_try_direct_io); 4424 return err; 4425 } 4426 4427 static void do_remove_sysfs_files(void) 4428 { 4429 struct device_driver *sysfs = &st_template.gendrv; 4430 4431 driver_remove_file(sysfs, &driver_attr_version); 4432 driver_remove_file(sysfs, &driver_attr_max_sg_segs); 4433 driver_remove_file(sysfs, &driver_attr_fixed_buffer_size); 4434 driver_remove_file(sysfs, &driver_attr_try_direct_io); 4435 } 4436 4437 /* The sysfs simple class interface */ 4438 static ssize_t 4439 defined_show(struct device *dev, struct device_attribute *attr, char *buf) 4440 { 4441 struct st_modedef *STm = dev_get_drvdata(dev); 4442 ssize_t l = 0; 4443 4444 l = snprintf(buf, PAGE_SIZE, "%d\n", STm->defined); 4445 return l; 4446 } 4447 static DEVICE_ATTR_RO(defined); 4448 4449 static ssize_t 4450 default_blksize_show(struct device *dev, struct device_attribute *attr, 4451 char *buf) 4452 { 4453 struct st_modedef *STm = dev_get_drvdata(dev); 4454 ssize_t l = 0; 4455 4456 l = snprintf(buf, PAGE_SIZE, "%d\n", STm->default_blksize); 4457 return l; 4458 } 4459 static DEVICE_ATTR_RO(default_blksize); 4460 4461 static ssize_t 4462 default_density_show(struct device *dev, struct device_attribute *attr, 4463 char *buf) 4464 { 4465 struct st_modedef *STm = dev_get_drvdata(dev); 4466 ssize_t l = 0; 4467 char *fmt; 4468 4469 fmt = STm->default_density >= 0 ? "0x%02x\n" : "%d\n"; 4470 l = snprintf(buf, PAGE_SIZE, fmt, STm->default_density); 4471 return l; 4472 } 4473 static DEVICE_ATTR_RO(default_density); 4474 4475 static ssize_t 4476 default_compression_show(struct device *dev, struct device_attribute *attr, 4477 char *buf) 4478 { 4479 struct st_modedef *STm = dev_get_drvdata(dev); 4480 ssize_t l = 0; 4481 4482 l = snprintf(buf, PAGE_SIZE, "%d\n", STm->default_compression - 1); 4483 return l; 4484 } 4485 static DEVICE_ATTR_RO(default_compression); 4486 4487 static ssize_t 4488 options_show(struct device *dev, struct device_attribute *attr, char *buf) 4489 { 4490 struct st_modedef *STm = dev_get_drvdata(dev); 4491 struct scsi_tape *STp = STm->tape; 4492 int options; 4493 ssize_t l = 0; 4494 4495 options = STm->do_buffer_writes ? MT_ST_BUFFER_WRITES : 0; 4496 options |= STm->do_async_writes ? MT_ST_ASYNC_WRITES : 0; 4497 options |= STm->do_read_ahead ? MT_ST_READ_AHEAD : 0; 4498 DEB( options |= debugging ? MT_ST_DEBUGGING : 0 ); 4499 options |= STp->two_fm ? MT_ST_TWO_FM : 0; 4500 options |= STp->fast_mteom ? MT_ST_FAST_MTEOM : 0; 4501 options |= STm->defaults_for_writes ? MT_ST_DEF_WRITES : 0; 4502 options |= STp->can_bsr ? MT_ST_CAN_BSR : 0; 4503 options |= STp->omit_blklims ? MT_ST_NO_BLKLIMS : 0; 4504 options |= STp->can_partitions ? MT_ST_CAN_PARTITIONS : 0; 4505 options |= STp->scsi2_logical ? MT_ST_SCSI2LOGICAL : 0; 4506 options |= STm->sysv ? MT_ST_SYSV : 0; 4507 options |= STp->immediate ? MT_ST_NOWAIT : 0; 4508 options |= STp->immediate_filemark ? MT_ST_NOWAIT_EOF : 0; 4509 options |= STp->sili ? MT_ST_SILI : 0; 4510 4511 l = snprintf(buf, PAGE_SIZE, "0x%08x\n", options); 4512 return l; 4513 } 4514 static DEVICE_ATTR_RO(options); 4515 4516 static struct attribute *st_dev_attrs[] = { 4517 &dev_attr_defined.attr, 4518 &dev_attr_default_blksize.attr, 4519 &dev_attr_default_density.attr, 4520 &dev_attr_default_compression.attr, 4521 &dev_attr_options.attr, 4522 NULL, 4523 }; 4524 ATTRIBUTE_GROUPS(st_dev); 4525 4526 /* The following functions may be useful for a larger audience. */ 4527 static int sgl_map_user_pages(struct st_buffer *STbp, 4528 const unsigned int max_pages, unsigned long uaddr, 4529 size_t count, int rw) 4530 { 4531 unsigned long end = (uaddr + count + PAGE_SIZE - 1) >> PAGE_SHIFT; 4532 unsigned long start = uaddr >> PAGE_SHIFT; 4533 const int nr_pages = end - start; 4534 int res, i, j; 4535 struct page **pages; 4536 struct rq_map_data *mdata = &STbp->map_data; 4537 4538 /* User attempted Overflow! */ 4539 if ((uaddr + count) < uaddr) 4540 return -EINVAL; 4541 4542 /* Too big */ 4543 if (nr_pages > max_pages) 4544 return -ENOMEM; 4545 4546 /* Hmm? */ 4547 if (count == 0) 4548 return 0; 4549 4550 if ((pages = kmalloc(max_pages * sizeof(*pages), GFP_KERNEL)) == NULL) 4551 return -ENOMEM; 4552 4553 /* Try to fault in all of the necessary pages */ 4554 down_read(¤t->mm->mmap_sem); 4555 /* rw==READ means read from drive, write into memory area */ 4556 res = get_user_pages( 4557 current, 4558 current->mm, 4559 uaddr, 4560 nr_pages, 4561 rw == READ, 4562 0, /* don't force */ 4563 pages, 4564 NULL); 4565 up_read(¤t->mm->mmap_sem); 4566 4567 /* Errors and no page mapped should return here */ 4568 if (res < nr_pages) 4569 goto out_unmap; 4570 4571 for (i=0; i < nr_pages; i++) { 4572 /* FIXME: flush superflous for rw==READ, 4573 * probably wrong function for rw==WRITE 4574 */ 4575 flush_dcache_page(pages[i]); 4576 } 4577 4578 mdata->offset = uaddr & ~PAGE_MASK; 4579 STbp->mapped_pages = pages; 4580 4581 return nr_pages; 4582 out_unmap: 4583 if (res > 0) { 4584 for (j=0; j < res; j++) 4585 page_cache_release(pages[j]); 4586 res = 0; 4587 } 4588 kfree(pages); 4589 return res; 4590 } 4591 4592 4593 /* And unmap them... */ 4594 static int sgl_unmap_user_pages(struct st_buffer *STbp, 4595 const unsigned int nr_pages, int dirtied) 4596 { 4597 int i; 4598 4599 for (i=0; i < nr_pages; i++) { 4600 struct page *page = STbp->mapped_pages[i]; 4601 4602 if (dirtied) 4603 SetPageDirty(page); 4604 /* FIXME: cache flush missing for rw==READ 4605 * FIXME: call the correct reference counting function 4606 */ 4607 page_cache_release(page); 4608 } 4609 kfree(STbp->mapped_pages); 4610 STbp->mapped_pages = NULL; 4611 4612 return 0; 4613 } 4614