xref: /openbmc/linux/drivers/scsi/sr.c (revision b664e06d)
1 /*
2  *  sr.c Copyright (C) 1992 David Giller
3  *           Copyright (C) 1993, 1994, 1995, 1999 Eric Youngdale
4  *
5  *  adapted from:
6  *      sd.c Copyright (C) 1992 Drew Eckhardt
7  *      Linux scsi disk driver by
8  *              Drew Eckhardt <drew@colorado.edu>
9  *
10  *	Modified by Eric Youngdale ericy@andante.org to
11  *	add scatter-gather, multiple outstanding request, and other
12  *	enhancements.
13  *
14  *      Modified by Eric Youngdale eric@andante.org to support loadable
15  *      low-level scsi drivers.
16  *
17  *      Modified by Thomas Quinot thomas@melchior.cuivre.fdn.fr to
18  *      provide auto-eject.
19  *
20  *      Modified by Gerd Knorr <kraxel@cs.tu-berlin.de> to support the
21  *      generic cdrom interface
22  *
23  *      Modified by Jens Axboe <axboe@suse.de> - Uniform sr_packet()
24  *      interface, capabilities probe additions, ioctl cleanups, etc.
25  *
26  *	Modified by Richard Gooch <rgooch@atnf.csiro.au> to support devfs
27  *
28  *	Modified by Jens Axboe <axboe@suse.de> - support DVD-RAM
29  *	transparently and lose the GHOST hack
30  *
31  *	Modified by Arnaldo Carvalho de Melo <acme@conectiva.com.br>
32  *	check resource allocation in sr_init and some cleanups
33  */
34 
35 #include <linux/module.h>
36 #include <linux/fs.h>
37 #include <linux/kernel.h>
38 #include <linux/mm.h>
39 #include <linux/bio.h>
40 #include <linux/string.h>
41 #include <linux/errno.h>
42 #include <linux/cdrom.h>
43 #include <linux/interrupt.h>
44 #include <linux/init.h>
45 #include <linux/blkdev.h>
46 #include <linux/blk-pm.h>
47 #include <linux/mutex.h>
48 #include <linux/slab.h>
49 #include <linux/pm_runtime.h>
50 #include <linux/uaccess.h>
51 
52 #include <scsi/scsi.h>
53 #include <scsi/scsi_dbg.h>
54 #include <scsi/scsi_device.h>
55 #include <scsi/scsi_driver.h>
56 #include <scsi/scsi_cmnd.h>
57 #include <scsi/scsi_eh.h>
58 #include <scsi/scsi_host.h>
59 #include <scsi/scsi_ioctl.h>	/* For the door lock/unlock commands */
60 
61 #include "scsi_logging.h"
62 #include "sr.h"
63 
64 
65 MODULE_DESCRIPTION("SCSI cdrom (sr) driver");
66 MODULE_LICENSE("GPL");
67 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_CDROM_MAJOR);
68 MODULE_ALIAS_SCSI_DEVICE(TYPE_ROM);
69 MODULE_ALIAS_SCSI_DEVICE(TYPE_WORM);
70 
71 #define SR_DISKS	256
72 
73 #define SR_CAPABILITIES \
74 	(CDC_CLOSE_TRAY|CDC_OPEN_TRAY|CDC_LOCK|CDC_SELECT_SPEED| \
75 	 CDC_SELECT_DISC|CDC_MULTI_SESSION|CDC_MCN|CDC_MEDIA_CHANGED| \
76 	 CDC_PLAY_AUDIO|CDC_RESET|CDC_DRIVE_STATUS| \
77 	 CDC_CD_R|CDC_CD_RW|CDC_DVD|CDC_DVD_R|CDC_DVD_RAM|CDC_GENERIC_PACKET| \
78 	 CDC_MRW|CDC_MRW_W|CDC_RAM)
79 
80 static DEFINE_MUTEX(sr_mutex);
81 static int sr_probe(struct device *);
82 static int sr_remove(struct device *);
83 static blk_status_t sr_init_command(struct scsi_cmnd *SCpnt);
84 static int sr_done(struct scsi_cmnd *);
85 static int sr_runtime_suspend(struct device *dev);
86 
87 static const struct dev_pm_ops sr_pm_ops = {
88 	.runtime_suspend	= sr_runtime_suspend,
89 };
90 
91 static struct scsi_driver sr_template = {
92 	.gendrv = {
93 		.name   	= "sr",
94 		.owner		= THIS_MODULE,
95 		.probe		= sr_probe,
96 		.remove		= sr_remove,
97 		.pm		= &sr_pm_ops,
98 	},
99 	.init_command		= sr_init_command,
100 	.done			= sr_done,
101 };
102 
103 static unsigned long sr_index_bits[SR_DISKS / BITS_PER_LONG];
104 static DEFINE_SPINLOCK(sr_index_lock);
105 
106 /* This semaphore is used to mediate the 0->1 reference get in the
107  * face of object destruction (i.e. we can't allow a get on an
108  * object after last put) */
109 static DEFINE_MUTEX(sr_ref_mutex);
110 
111 static int sr_open(struct cdrom_device_info *, int);
112 static void sr_release(struct cdrom_device_info *);
113 
114 static void get_sectorsize(struct scsi_cd *);
115 static void get_capabilities(struct scsi_cd *);
116 
117 static unsigned int sr_check_events(struct cdrom_device_info *cdi,
118 				    unsigned int clearing, int slot);
119 static int sr_packet(struct cdrom_device_info *, struct packet_command *);
120 
121 static const struct cdrom_device_ops sr_dops = {
122 	.open			= sr_open,
123 	.release	 	= sr_release,
124 	.drive_status	 	= sr_drive_status,
125 	.check_events		= sr_check_events,
126 	.tray_move		= sr_tray_move,
127 	.lock_door		= sr_lock_door,
128 	.select_speed		= sr_select_speed,
129 	.get_last_session	= sr_get_last_session,
130 	.get_mcn		= sr_get_mcn,
131 	.reset			= sr_reset,
132 	.audio_ioctl		= sr_audio_ioctl,
133 	.capability		= SR_CAPABILITIES,
134 	.generic_packet		= sr_packet,
135 };
136 
137 static void sr_kref_release(struct kref *kref);
138 
139 static inline struct scsi_cd *scsi_cd(struct gendisk *disk)
140 {
141 	return container_of(disk->private_data, struct scsi_cd, driver);
142 }
143 
144 static int sr_runtime_suspend(struct device *dev)
145 {
146 	struct scsi_cd *cd = dev_get_drvdata(dev);
147 
148 	if (!cd)	/* E.g.: runtime suspend following sr_remove() */
149 		return 0;
150 
151 	if (cd->media_present)
152 		return -EBUSY;
153 	else
154 		return 0;
155 }
156 
157 /*
158  * The get and put routines for the struct scsi_cd.  Note this entity
159  * has a scsi_device pointer and owns a reference to this.
160  */
161 static inline struct scsi_cd *scsi_cd_get(struct gendisk *disk)
162 {
163 	struct scsi_cd *cd = NULL;
164 
165 	mutex_lock(&sr_ref_mutex);
166 	if (disk->private_data == NULL)
167 		goto out;
168 	cd = scsi_cd(disk);
169 	kref_get(&cd->kref);
170 	if (scsi_device_get(cd->device)) {
171 		kref_put(&cd->kref, sr_kref_release);
172 		cd = NULL;
173 	}
174  out:
175 	mutex_unlock(&sr_ref_mutex);
176 	return cd;
177 }
178 
179 static void scsi_cd_put(struct scsi_cd *cd)
180 {
181 	struct scsi_device *sdev = cd->device;
182 
183 	mutex_lock(&sr_ref_mutex);
184 	kref_put(&cd->kref, sr_kref_release);
185 	scsi_device_put(sdev);
186 	mutex_unlock(&sr_ref_mutex);
187 }
188 
189 static unsigned int sr_get_events(struct scsi_device *sdev)
190 {
191 	u8 buf[8];
192 	u8 cmd[] = { GET_EVENT_STATUS_NOTIFICATION,
193 		     1,			/* polled */
194 		     0, 0,		/* reserved */
195 		     1 << 4,		/* notification class: media */
196 		     0, 0,		/* reserved */
197 		     0, sizeof(buf),	/* allocation length */
198 		     0,			/* control */
199 	};
200 	struct event_header *eh = (void *)buf;
201 	struct media_event_desc *med = (void *)(buf + 4);
202 	struct scsi_sense_hdr sshdr;
203 	int result;
204 
205 	result = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, sizeof(buf),
206 				  &sshdr, SR_TIMEOUT, MAX_RETRIES, NULL);
207 	if (scsi_sense_valid(&sshdr) && sshdr.sense_key == UNIT_ATTENTION)
208 		return DISK_EVENT_MEDIA_CHANGE;
209 
210 	if (result || be16_to_cpu(eh->data_len) < sizeof(*med))
211 		return 0;
212 
213 	if (eh->nea || eh->notification_class != 0x4)
214 		return 0;
215 
216 	if (med->media_event_code == 1)
217 		return DISK_EVENT_EJECT_REQUEST;
218 	else if (med->media_event_code == 2)
219 		return DISK_EVENT_MEDIA_CHANGE;
220 	return 0;
221 }
222 
223 /*
224  * This function checks to see if the media has been changed or eject
225  * button has been pressed.  It is possible that we have already
226  * sensed a change, or the drive may have sensed one and not yet
227  * reported it.  The past events are accumulated in sdev->changed and
228  * returned together with the current state.
229  */
230 static unsigned int sr_check_events(struct cdrom_device_info *cdi,
231 				    unsigned int clearing, int slot)
232 {
233 	struct scsi_cd *cd = cdi->handle;
234 	bool last_present;
235 	struct scsi_sense_hdr sshdr;
236 	unsigned int events;
237 	int ret;
238 
239 	/* no changer support */
240 	if (CDSL_CURRENT != slot)
241 		return 0;
242 
243 	events = sr_get_events(cd->device);
244 	cd->get_event_changed |= events & DISK_EVENT_MEDIA_CHANGE;
245 
246 	/*
247 	 * If earlier GET_EVENT_STATUS_NOTIFICATION and TUR did not agree
248 	 * for several times in a row.  We rely on TUR only for this likely
249 	 * broken device, to prevent generating incorrect media changed
250 	 * events for every open().
251 	 */
252 	if (cd->ignore_get_event) {
253 		events &= ~DISK_EVENT_MEDIA_CHANGE;
254 		goto do_tur;
255 	}
256 
257 	/*
258 	 * GET_EVENT_STATUS_NOTIFICATION is enough unless MEDIA_CHANGE
259 	 * is being cleared.  Note that there are devices which hang
260 	 * if asked to execute TUR repeatedly.
261 	 */
262 	if (cd->device->changed) {
263 		events |= DISK_EVENT_MEDIA_CHANGE;
264 		cd->device->changed = 0;
265 		cd->tur_changed = true;
266 	}
267 
268 	if (!(clearing & DISK_EVENT_MEDIA_CHANGE))
269 		return events;
270 do_tur:
271 	/* let's see whether the media is there with TUR */
272 	last_present = cd->media_present;
273 	ret = scsi_test_unit_ready(cd->device, SR_TIMEOUT, MAX_RETRIES, &sshdr);
274 
275 	/*
276 	 * Media is considered to be present if TUR succeeds or fails with
277 	 * sense data indicating something other than media-not-present
278 	 * (ASC 0x3a).
279 	 */
280 	cd->media_present = scsi_status_is_good(ret) ||
281 		(scsi_sense_valid(&sshdr) && sshdr.asc != 0x3a);
282 
283 	if (last_present != cd->media_present)
284 		cd->device->changed = 1;
285 
286 	if (cd->device->changed) {
287 		events |= DISK_EVENT_MEDIA_CHANGE;
288 		cd->device->changed = 0;
289 		cd->tur_changed = true;
290 	}
291 
292 	if (cd->ignore_get_event)
293 		return events;
294 
295 	/* check whether GET_EVENT is reporting spurious MEDIA_CHANGE */
296 	if (!cd->tur_changed) {
297 		if (cd->get_event_changed) {
298 			if (cd->tur_mismatch++ > 8) {
299 				sr_printk(KERN_WARNING, cd,
300 					  "GET_EVENT and TUR disagree continuously, suppress GET_EVENT events\n");
301 				cd->ignore_get_event = true;
302 			}
303 		} else {
304 			cd->tur_mismatch = 0;
305 		}
306 	}
307 	cd->tur_changed = false;
308 	cd->get_event_changed = false;
309 
310 	return events;
311 }
312 
313 /*
314  * sr_done is the interrupt routine for the device driver.
315  *
316  * It will be notified on the end of a SCSI read / write, and will take one
317  * of several actions based on success or failure.
318  */
319 static int sr_done(struct scsi_cmnd *SCpnt)
320 {
321 	int result = SCpnt->result;
322 	int this_count = scsi_bufflen(SCpnt);
323 	int good_bytes = (result == 0 ? this_count : 0);
324 	int block_sectors = 0;
325 	long error_sector;
326 	struct scsi_cd *cd = scsi_cd(SCpnt->request->rq_disk);
327 
328 #ifdef DEBUG
329 	scmd_printk(KERN_INFO, SCpnt, "done: %x\n", result);
330 #endif
331 
332 	/*
333 	 * Handle MEDIUM ERRORs or VOLUME OVERFLOWs that indicate partial
334 	 * success.  Since this is a relatively rare error condition, no
335 	 * care is taken to avoid unnecessary additional work such as
336 	 * memcpy's that could be avoided.
337 	 */
338 	if (driver_byte(result) != 0 &&		/* An error occurred */
339 	    (SCpnt->sense_buffer[0] & 0x7f) == 0x70) { /* Sense current */
340 		switch (SCpnt->sense_buffer[2]) {
341 		case MEDIUM_ERROR:
342 		case VOLUME_OVERFLOW:
343 		case ILLEGAL_REQUEST:
344 			if (!(SCpnt->sense_buffer[0] & 0x90))
345 				break;
346 			error_sector = (SCpnt->sense_buffer[3] << 24) |
347 				(SCpnt->sense_buffer[4] << 16) |
348 				(SCpnt->sense_buffer[5] << 8) |
349 				SCpnt->sense_buffer[6];
350 			if (SCpnt->request->bio != NULL)
351 				block_sectors =
352 					bio_sectors(SCpnt->request->bio);
353 			if (block_sectors < 4)
354 				block_sectors = 4;
355 			if (cd->device->sector_size == 2048)
356 				error_sector <<= 2;
357 			error_sector &= ~(block_sectors - 1);
358 			good_bytes = (error_sector -
359 				      blk_rq_pos(SCpnt->request)) << 9;
360 			if (good_bytes < 0 || good_bytes >= this_count)
361 				good_bytes = 0;
362 			/*
363 			 * The SCSI specification allows for the value
364 			 * returned by READ CAPACITY to be up to 75 2K
365 			 * sectors past the last readable block.
366 			 * Therefore, if we hit a medium error within the
367 			 * last 75 2K sectors, we decrease the saved size
368 			 * value.
369 			 */
370 			if (error_sector < get_capacity(cd->disk) &&
371 			    cd->capacity - error_sector < 4 * 75)
372 				set_capacity(cd->disk, error_sector);
373 			break;
374 
375 		case RECOVERED_ERROR:
376 			good_bytes = this_count;
377 			break;
378 
379 		default:
380 			break;
381 		}
382 	}
383 
384 	return good_bytes;
385 }
386 
387 static blk_status_t sr_init_command(struct scsi_cmnd *SCpnt)
388 {
389 	int block = 0, this_count, s_size;
390 	struct scsi_cd *cd;
391 	struct request *rq = SCpnt->request;
392 	blk_status_t ret;
393 
394 	ret = scsi_init_io(SCpnt);
395 	if (ret != BLK_STS_OK)
396 		goto out;
397 	cd = scsi_cd(rq->rq_disk);
398 
399 	/* from here on until we're complete, any goto out
400 	 * is used for a killable error condition */
401 	ret = BLK_STS_IOERR;
402 
403 	SCSI_LOG_HLQUEUE(1, scmd_printk(KERN_INFO, SCpnt,
404 		"Doing sr request, block = %d\n", block));
405 
406 	if (!cd->device || !scsi_device_online(cd->device)) {
407 		SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
408 			"Finishing %u sectors\n", blk_rq_sectors(rq)));
409 		SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
410 			"Retry with 0x%p\n", SCpnt));
411 		goto out;
412 	}
413 
414 	if (cd->device->changed) {
415 		/*
416 		 * quietly refuse to do anything to a changed disc until the
417 		 * changed bit has been reset
418 		 */
419 		goto out;
420 	}
421 
422 	/*
423 	 * we do lazy blocksize switching (when reading XA sectors,
424 	 * see CDROMREADMODE2 ioctl)
425 	 */
426 	s_size = cd->device->sector_size;
427 	if (s_size > 2048) {
428 		if (!in_interrupt())
429 			sr_set_blocklength(cd, 2048);
430 		else
431 			scmd_printk(KERN_INFO, SCpnt,
432 				    "can't switch blocksize: in interrupt\n");
433 	}
434 
435 	if (s_size != 512 && s_size != 1024 && s_size != 2048) {
436 		scmd_printk(KERN_ERR, SCpnt, "bad sector size %d\n", s_size);
437 		goto out;
438 	}
439 
440 	switch (req_op(rq)) {
441 	case REQ_OP_WRITE:
442 		if (!cd->writeable)
443 			goto out;
444 		SCpnt->cmnd[0] = WRITE_10;
445 		cd->cdi.media_written = 1;
446 		break;
447 	case REQ_OP_READ:
448 		SCpnt->cmnd[0] = READ_10;
449 		break;
450 	default:
451 		blk_dump_rq_flags(rq, "Unknown sr command");
452 		goto out;
453 	}
454 
455 	{
456 		struct scatterlist *sg;
457 		int i, size = 0, sg_count = scsi_sg_count(SCpnt);
458 
459 		scsi_for_each_sg(SCpnt, sg, sg_count, i)
460 			size += sg->length;
461 
462 		if (size != scsi_bufflen(SCpnt)) {
463 			scmd_printk(KERN_ERR, SCpnt,
464 				"mismatch count %d, bytes %d\n",
465 				size, scsi_bufflen(SCpnt));
466 			if (scsi_bufflen(SCpnt) > size)
467 				SCpnt->sdb.length = size;
468 		}
469 	}
470 
471 	/*
472 	 * request doesn't start on hw block boundary, add scatter pads
473 	 */
474 	if (((unsigned int)blk_rq_pos(rq) % (s_size >> 9)) ||
475 	    (scsi_bufflen(SCpnt) % s_size)) {
476 		scmd_printk(KERN_NOTICE, SCpnt, "unaligned transfer\n");
477 		goto out;
478 	}
479 
480 	this_count = (scsi_bufflen(SCpnt) >> 9) / (s_size >> 9);
481 
482 
483 	SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
484 					"%s %d/%u 512 byte blocks.\n",
485 					(rq_data_dir(rq) == WRITE) ?
486 					"writing" : "reading",
487 					this_count, blk_rq_sectors(rq)));
488 
489 	SCpnt->cmnd[1] = 0;
490 	block = (unsigned int)blk_rq_pos(rq) / (s_size >> 9);
491 
492 	if (this_count > 0xffff) {
493 		this_count = 0xffff;
494 		SCpnt->sdb.length = this_count * s_size;
495 	}
496 
497 	SCpnt->cmnd[2] = (unsigned char) (block >> 24) & 0xff;
498 	SCpnt->cmnd[3] = (unsigned char) (block >> 16) & 0xff;
499 	SCpnt->cmnd[4] = (unsigned char) (block >> 8) & 0xff;
500 	SCpnt->cmnd[5] = (unsigned char) block & 0xff;
501 	SCpnt->cmnd[6] = SCpnt->cmnd[9] = 0;
502 	SCpnt->cmnd[7] = (unsigned char) (this_count >> 8) & 0xff;
503 	SCpnt->cmnd[8] = (unsigned char) this_count & 0xff;
504 
505 	/*
506 	 * We shouldn't disconnect in the middle of a sector, so with a dumb
507 	 * host adapter, it's safe to assume that we can at least transfer
508 	 * this many bytes between each connect / disconnect.
509 	 */
510 	SCpnt->transfersize = cd->device->sector_size;
511 	SCpnt->underflow = this_count << 9;
512 	SCpnt->allowed = MAX_RETRIES;
513 
514 	/*
515 	 * This indicates that the command is ready from our end to be
516 	 * queued.
517 	 */
518 	ret = BLK_STS_OK;
519  out:
520 	return ret;
521 }
522 
523 static int sr_block_open(struct block_device *bdev, fmode_t mode)
524 {
525 	struct scsi_cd *cd;
526 	struct scsi_device *sdev;
527 	int ret = -ENXIO;
528 
529 	cd = scsi_cd_get(bdev->bd_disk);
530 	if (!cd)
531 		goto out;
532 
533 	sdev = cd->device;
534 	scsi_autopm_get_device(sdev);
535 	check_disk_change(bdev);
536 
537 	mutex_lock(&sr_mutex);
538 	ret = cdrom_open(&cd->cdi, bdev, mode);
539 	mutex_unlock(&sr_mutex);
540 
541 	scsi_autopm_put_device(sdev);
542 	if (ret)
543 		scsi_cd_put(cd);
544 
545 out:
546 	return ret;
547 }
548 
549 static void sr_block_release(struct gendisk *disk, fmode_t mode)
550 {
551 	struct scsi_cd *cd = scsi_cd(disk);
552 	mutex_lock(&sr_mutex);
553 	cdrom_release(&cd->cdi, mode);
554 	scsi_cd_put(cd);
555 	mutex_unlock(&sr_mutex);
556 }
557 
558 static int sr_block_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd,
559 			  unsigned long arg)
560 {
561 	struct scsi_cd *cd = scsi_cd(bdev->bd_disk);
562 	struct scsi_device *sdev = cd->device;
563 	void __user *argp = (void __user *)arg;
564 	int ret;
565 
566 	mutex_lock(&sr_mutex);
567 
568 	ret = scsi_ioctl_block_when_processing_errors(sdev, cmd,
569 			(mode & FMODE_NDELAY) != 0);
570 	if (ret)
571 		goto out;
572 
573 	scsi_autopm_get_device(sdev);
574 
575 	/*
576 	 * Send SCSI addressing ioctls directly to mid level, send other
577 	 * ioctls to cdrom/block level.
578 	 */
579 	switch (cmd) {
580 	case SCSI_IOCTL_GET_IDLUN:
581 	case SCSI_IOCTL_GET_BUS_NUMBER:
582 		ret = scsi_ioctl(sdev, cmd, argp);
583 		goto put;
584 	}
585 
586 	ret = cdrom_ioctl(&cd->cdi, bdev, mode, cmd, arg);
587 	if (ret != -ENOSYS)
588 		goto put;
589 
590 	ret = scsi_ioctl(sdev, cmd, argp);
591 
592 put:
593 	scsi_autopm_put_device(sdev);
594 
595 out:
596 	mutex_unlock(&sr_mutex);
597 	return ret;
598 }
599 
600 static unsigned int sr_block_check_events(struct gendisk *disk,
601 					  unsigned int clearing)
602 {
603 	unsigned int ret = 0;
604 	struct scsi_cd *cd;
605 
606 	cd = scsi_cd_get(disk);
607 	if (!cd)
608 		return 0;
609 
610 	if (!atomic_read(&cd->device->disk_events_disable_depth))
611 		ret = cdrom_check_events(&cd->cdi, clearing);
612 
613 	scsi_cd_put(cd);
614 	return ret;
615 }
616 
617 static int sr_block_revalidate_disk(struct gendisk *disk)
618 {
619 	struct scsi_sense_hdr sshdr;
620 	struct scsi_cd *cd;
621 
622 	cd = scsi_cd_get(disk);
623 	if (!cd)
624 		return -ENXIO;
625 
626 	/* if the unit is not ready, nothing more to do */
627 	if (scsi_test_unit_ready(cd->device, SR_TIMEOUT, MAX_RETRIES, &sshdr))
628 		goto out;
629 
630 	sr_cd_check(&cd->cdi);
631 	get_sectorsize(cd);
632 out:
633 	scsi_cd_put(cd);
634 	return 0;
635 }
636 
637 static const struct block_device_operations sr_bdops =
638 {
639 	.owner		= THIS_MODULE,
640 	.open		= sr_block_open,
641 	.release	= sr_block_release,
642 	.ioctl		= sr_block_ioctl,
643 	.check_events	= sr_block_check_events,
644 	.revalidate_disk = sr_block_revalidate_disk,
645 	/*
646 	 * No compat_ioctl for now because sr_block_ioctl never
647 	 * seems to pass arbitrary ioctls down to host drivers.
648 	 */
649 };
650 
651 static int sr_open(struct cdrom_device_info *cdi, int purpose)
652 {
653 	struct scsi_cd *cd = cdi->handle;
654 	struct scsi_device *sdev = cd->device;
655 	int retval;
656 
657 	/*
658 	 * If the device is in error recovery, wait until it is done.
659 	 * If the device is offline, then disallow any access to it.
660 	 */
661 	retval = -ENXIO;
662 	if (!scsi_block_when_processing_errors(sdev))
663 		goto error_out;
664 
665 	return 0;
666 
667 error_out:
668 	return retval;
669 }
670 
671 static void sr_release(struct cdrom_device_info *cdi)
672 {
673 	struct scsi_cd *cd = cdi->handle;
674 
675 	if (cd->device->sector_size > 2048)
676 		sr_set_blocklength(cd, 2048);
677 
678 }
679 
680 static int sr_probe(struct device *dev)
681 {
682 	struct scsi_device *sdev = to_scsi_device(dev);
683 	struct gendisk *disk;
684 	struct scsi_cd *cd;
685 	int minor, error;
686 
687 	scsi_autopm_get_device(sdev);
688 	error = -ENODEV;
689 	if (sdev->type != TYPE_ROM && sdev->type != TYPE_WORM)
690 		goto fail;
691 
692 	error = -ENOMEM;
693 	cd = kzalloc(sizeof(*cd), GFP_KERNEL);
694 	if (!cd)
695 		goto fail;
696 
697 	kref_init(&cd->kref);
698 
699 	disk = alloc_disk(1);
700 	if (!disk)
701 		goto fail_free;
702 
703 	spin_lock(&sr_index_lock);
704 	minor = find_first_zero_bit(sr_index_bits, SR_DISKS);
705 	if (minor == SR_DISKS) {
706 		spin_unlock(&sr_index_lock);
707 		error = -EBUSY;
708 		goto fail_put;
709 	}
710 	__set_bit(minor, sr_index_bits);
711 	spin_unlock(&sr_index_lock);
712 
713 	disk->major = SCSI_CDROM_MAJOR;
714 	disk->first_minor = minor;
715 	sprintf(disk->disk_name, "sr%d", minor);
716 	disk->fops = &sr_bdops;
717 	disk->flags = GENHD_FL_CD | GENHD_FL_BLOCK_EVENTS_ON_EXCL_WRITE;
718 	disk->events = DISK_EVENT_MEDIA_CHANGE | DISK_EVENT_EJECT_REQUEST;
719 	disk->event_flags = DISK_EVENT_FLAG_POLL | DISK_EVENT_FLAG_UEVENT;
720 
721 	blk_queue_rq_timeout(sdev->request_queue, SR_TIMEOUT);
722 
723 	cd->device = sdev;
724 	cd->disk = disk;
725 	cd->driver = &sr_template;
726 	cd->disk = disk;
727 	cd->capacity = 0x1fffff;
728 	cd->device->changed = 1;	/* force recheck CD type */
729 	cd->media_present = 1;
730 	cd->use = 1;
731 	cd->readcd_known = 0;
732 	cd->readcd_cdda = 0;
733 
734 	cd->cdi.ops = &sr_dops;
735 	cd->cdi.handle = cd;
736 	cd->cdi.mask = 0;
737 	cd->cdi.capacity = 1;
738 	sprintf(cd->cdi.name, "sr%d", minor);
739 
740 	sdev->sector_size = 2048;	/* A guess, just in case */
741 
742 	/* FIXME: need to handle a get_capabilities failure properly ?? */
743 	get_capabilities(cd);
744 	sr_vendor_init(cd);
745 
746 	set_capacity(disk, cd->capacity);
747 	disk->private_data = &cd->driver;
748 	disk->queue = sdev->request_queue;
749 	cd->cdi.disk = disk;
750 
751 	if (register_cdrom(&cd->cdi))
752 		goto fail_put;
753 
754 	/*
755 	 * Initialize block layer runtime PM stuffs before the
756 	 * periodic event checking request gets started in add_disk.
757 	 */
758 	blk_pm_runtime_init(sdev->request_queue, dev);
759 
760 	dev_set_drvdata(dev, cd);
761 	disk->flags |= GENHD_FL_REMOVABLE;
762 	device_add_disk(&sdev->sdev_gendev, disk, NULL);
763 
764 	sdev_printk(KERN_DEBUG, sdev,
765 		    "Attached scsi CD-ROM %s\n", cd->cdi.name);
766 	scsi_autopm_put_device(cd->device);
767 
768 	return 0;
769 
770 fail_put:
771 	put_disk(disk);
772 fail_free:
773 	kfree(cd);
774 fail:
775 	scsi_autopm_put_device(sdev);
776 	return error;
777 }
778 
779 
780 static void get_sectorsize(struct scsi_cd *cd)
781 {
782 	unsigned char cmd[10];
783 	unsigned char buffer[8];
784 	int the_result, retries = 3;
785 	int sector_size;
786 	struct request_queue *queue;
787 
788 	do {
789 		cmd[0] = READ_CAPACITY;
790 		memset((void *) &cmd[1], 0, 9);
791 		memset(buffer, 0, sizeof(buffer));
792 
793 		/* Do the command and wait.. */
794 		the_result = scsi_execute_req(cd->device, cmd, DMA_FROM_DEVICE,
795 					      buffer, sizeof(buffer), NULL,
796 					      SR_TIMEOUT, MAX_RETRIES, NULL);
797 
798 		retries--;
799 
800 	} while (the_result && retries);
801 
802 
803 	if (the_result) {
804 		cd->capacity = 0x1fffff;
805 		sector_size = 2048;	/* A guess, just in case */
806 	} else {
807 		long last_written;
808 
809 		cd->capacity = 1 + ((buffer[0] << 24) | (buffer[1] << 16) |
810 				    (buffer[2] << 8) | buffer[3]);
811 		/*
812 		 * READ_CAPACITY doesn't return the correct size on
813 		 * certain UDF media.  If last_written is larger, use
814 		 * it instead.
815 		 *
816 		 * http://bugzilla.kernel.org/show_bug.cgi?id=9668
817 		 */
818 		if (!cdrom_get_last_written(&cd->cdi, &last_written))
819 			cd->capacity = max_t(long, cd->capacity, last_written);
820 
821 		sector_size = (buffer[4] << 24) |
822 		    (buffer[5] << 16) | (buffer[6] << 8) | buffer[7];
823 		switch (sector_size) {
824 			/*
825 			 * HP 4020i CD-Recorder reports 2340 byte sectors
826 			 * Philips CD-Writers report 2352 byte sectors
827 			 *
828 			 * Use 2k sectors for them..
829 			 */
830 		case 0:
831 		case 2340:
832 		case 2352:
833 			sector_size = 2048;
834 			/* fall through */
835 		case 2048:
836 			cd->capacity *= 4;
837 			/* fall through */
838 		case 512:
839 			break;
840 		default:
841 			sr_printk(KERN_INFO, cd,
842 				  "unsupported sector size %d.", sector_size);
843 			cd->capacity = 0;
844 		}
845 
846 		cd->device->sector_size = sector_size;
847 
848 		/*
849 		 * Add this so that we have the ability to correctly gauge
850 		 * what the device is capable of.
851 		 */
852 		set_capacity(cd->disk, cd->capacity);
853 	}
854 
855 	queue = cd->device->request_queue;
856 	blk_queue_logical_block_size(queue, sector_size);
857 
858 	return;
859 }
860 
861 static void get_capabilities(struct scsi_cd *cd)
862 {
863 	unsigned char *buffer;
864 	struct scsi_mode_data data;
865 	struct scsi_sense_hdr sshdr;
866 	unsigned int ms_len = 128;
867 	int rc, n;
868 
869 	static const char *loadmech[] =
870 	{
871 		"caddy",
872 		"tray",
873 		"pop-up",
874 		"",
875 		"changer",
876 		"cartridge changer",
877 		"",
878 		""
879 	};
880 
881 
882 	/* allocate transfer buffer */
883 	buffer = kmalloc(512, GFP_KERNEL | GFP_DMA);
884 	if (!buffer) {
885 		sr_printk(KERN_ERR, cd, "out of memory.\n");
886 		return;
887 	}
888 
889 	/* eat unit attentions */
890 	scsi_test_unit_ready(cd->device, SR_TIMEOUT, MAX_RETRIES, &sshdr);
891 
892 	/* ask for mode page 0x2a */
893 	rc = scsi_mode_sense(cd->device, 0, 0x2a, buffer, ms_len,
894 			     SR_TIMEOUT, 3, &data, NULL);
895 
896 	if (!scsi_status_is_good(rc) || data.length > ms_len ||
897 	    data.header_length + data.block_descriptor_length > data.length) {
898 		/* failed, drive doesn't have capabilities mode page */
899 		cd->cdi.speed = 1;
900 		cd->cdi.mask |= (CDC_CD_R | CDC_CD_RW | CDC_DVD_R |
901 				 CDC_DVD | CDC_DVD_RAM |
902 				 CDC_SELECT_DISC | CDC_SELECT_SPEED |
903 				 CDC_MRW | CDC_MRW_W | CDC_RAM);
904 		kfree(buffer);
905 		sr_printk(KERN_INFO, cd, "scsi-1 drive");
906 		return;
907 	}
908 
909 	n = data.header_length + data.block_descriptor_length;
910 	cd->cdi.speed = ((buffer[n + 8] << 8) + buffer[n + 9]) / 176;
911 	cd->readcd_known = 1;
912 	cd->readcd_cdda = buffer[n + 5] & 0x01;
913 	/* print some capability bits */
914 	sr_printk(KERN_INFO, cd,
915 		  "scsi3-mmc drive: %dx/%dx %s%s%s%s%s%s\n",
916 		  ((buffer[n + 14] << 8) + buffer[n + 15]) / 176,
917 		  cd->cdi.speed,
918 		  buffer[n + 3] & 0x01 ? "writer " : "", /* CD Writer */
919 		  buffer[n + 3] & 0x20 ? "dvd-ram " : "",
920 		  buffer[n + 2] & 0x02 ? "cd/rw " : "", /* can read rewriteable */
921 		  buffer[n + 4] & 0x20 ? "xa/form2 " : "",	/* can read xa/from2 */
922 		  buffer[n + 5] & 0x01 ? "cdda " : "", /* can read audio data */
923 		  loadmech[buffer[n + 6] >> 5]);
924 	if ((buffer[n + 6] >> 5) == 0)
925 		/* caddy drives can't close tray... */
926 		cd->cdi.mask |= CDC_CLOSE_TRAY;
927 	if ((buffer[n + 2] & 0x8) == 0)
928 		/* not a DVD drive */
929 		cd->cdi.mask |= CDC_DVD;
930 	if ((buffer[n + 3] & 0x20) == 0)
931 		/* can't write DVD-RAM media */
932 		cd->cdi.mask |= CDC_DVD_RAM;
933 	if ((buffer[n + 3] & 0x10) == 0)
934 		/* can't write DVD-R media */
935 		cd->cdi.mask |= CDC_DVD_R;
936 	if ((buffer[n + 3] & 0x2) == 0)
937 		/* can't write CD-RW media */
938 		cd->cdi.mask |= CDC_CD_RW;
939 	if ((buffer[n + 3] & 0x1) == 0)
940 		/* can't write CD-R media */
941 		cd->cdi.mask |= CDC_CD_R;
942 	if ((buffer[n + 6] & 0x8) == 0)
943 		/* can't eject */
944 		cd->cdi.mask |= CDC_OPEN_TRAY;
945 
946 	if ((buffer[n + 6] >> 5) == mechtype_individual_changer ||
947 	    (buffer[n + 6] >> 5) == mechtype_cartridge_changer)
948 		cd->cdi.capacity =
949 		    cdrom_number_of_slots(&cd->cdi);
950 	if (cd->cdi.capacity <= 1)
951 		/* not a changer */
952 		cd->cdi.mask |= CDC_SELECT_DISC;
953 	/*else    I don't think it can close its tray
954 		cd->cdi.mask |= CDC_CLOSE_TRAY; */
955 
956 	/*
957 	 * if DVD-RAM, MRW-W or CD-RW, we are randomly writable
958 	 */
959 	if ((cd->cdi.mask & (CDC_DVD_RAM | CDC_MRW_W | CDC_RAM | CDC_CD_RW)) !=
960 			(CDC_DVD_RAM | CDC_MRW_W | CDC_RAM | CDC_CD_RW)) {
961 		cd->writeable = 1;
962 	}
963 
964 	kfree(buffer);
965 }
966 
967 /*
968  * sr_packet() is the entry point for the generic commands generated
969  * by the Uniform CD-ROM layer.
970  */
971 static int sr_packet(struct cdrom_device_info *cdi,
972 		struct packet_command *cgc)
973 {
974 	struct scsi_cd *cd = cdi->handle;
975 	struct scsi_device *sdev = cd->device;
976 
977 	if (cgc->cmd[0] == GPCMD_READ_DISC_INFO && sdev->no_read_disc_info)
978 		return -EDRIVE_CANT_DO_THIS;
979 
980 	if (cgc->timeout <= 0)
981 		cgc->timeout = IOCTL_TIMEOUT;
982 
983 	sr_do_ioctl(cd, cgc);
984 
985 	return cgc->stat;
986 }
987 
988 /**
989  *	sr_kref_release - Called to free the scsi_cd structure
990  *	@kref: pointer to embedded kref
991  *
992  *	sr_ref_mutex must be held entering this routine.  Because it is
993  *	called on last put, you should always use the scsi_cd_get()
994  *	scsi_cd_put() helpers which manipulate the semaphore directly
995  *	and never do a direct kref_put().
996  **/
997 static void sr_kref_release(struct kref *kref)
998 {
999 	struct scsi_cd *cd = container_of(kref, struct scsi_cd, kref);
1000 	struct gendisk *disk = cd->disk;
1001 
1002 	spin_lock(&sr_index_lock);
1003 	clear_bit(MINOR(disk_devt(disk)), sr_index_bits);
1004 	spin_unlock(&sr_index_lock);
1005 
1006 	unregister_cdrom(&cd->cdi);
1007 
1008 	disk->private_data = NULL;
1009 
1010 	put_disk(disk);
1011 
1012 	kfree(cd);
1013 }
1014 
1015 static int sr_remove(struct device *dev)
1016 {
1017 	struct scsi_cd *cd = dev_get_drvdata(dev);
1018 
1019 	scsi_autopm_get_device(cd->device);
1020 
1021 	del_gendisk(cd->disk);
1022 	dev_set_drvdata(dev, NULL);
1023 
1024 	mutex_lock(&sr_ref_mutex);
1025 	kref_put(&cd->kref, sr_kref_release);
1026 	mutex_unlock(&sr_ref_mutex);
1027 
1028 	return 0;
1029 }
1030 
1031 static int __init init_sr(void)
1032 {
1033 	int rc;
1034 
1035 	rc = register_blkdev(SCSI_CDROM_MAJOR, "sr");
1036 	if (rc)
1037 		return rc;
1038 	rc = scsi_register_driver(&sr_template.gendrv);
1039 	if (rc)
1040 		unregister_blkdev(SCSI_CDROM_MAJOR, "sr");
1041 
1042 	return rc;
1043 }
1044 
1045 static void __exit exit_sr(void)
1046 {
1047 	scsi_unregister_driver(&sr_template.gendrv);
1048 	unregister_blkdev(SCSI_CDROM_MAJOR, "sr");
1049 }
1050 
1051 module_init(init_sr);
1052 module_exit(exit_sr);
1053 MODULE_LICENSE("GPL");
1054