xref: /openbmc/linux/drivers/scsi/sr.c (revision 261a9af6)
1 /*
2  *  sr.c Copyright (C) 1992 David Giller
3  *           Copyright (C) 1993, 1994, 1995, 1999 Eric Youngdale
4  *
5  *  adapted from:
6  *      sd.c Copyright (C) 1992 Drew Eckhardt
7  *      Linux scsi disk driver by
8  *              Drew Eckhardt <drew@colorado.edu>
9  *
10  *	Modified by Eric Youngdale ericy@andante.org to
11  *	add scatter-gather, multiple outstanding request, and other
12  *	enhancements.
13  *
14  *      Modified by Eric Youngdale eric@andante.org to support loadable
15  *      low-level scsi drivers.
16  *
17  *      Modified by Thomas Quinot thomas@melchior.cuivre.fdn.fr to
18  *      provide auto-eject.
19  *
20  *      Modified by Gerd Knorr <kraxel@cs.tu-berlin.de> to support the
21  *      generic cdrom interface
22  *
23  *      Modified by Jens Axboe <axboe@suse.de> - Uniform sr_packet()
24  *      interface, capabilities probe additions, ioctl cleanups, etc.
25  *
26  *	Modified by Richard Gooch <rgooch@atnf.csiro.au> to support devfs
27  *
28  *	Modified by Jens Axboe <axboe@suse.de> - support DVD-RAM
29  *	transparently and lose the GHOST hack
30  *
31  *	Modified by Arnaldo Carvalho de Melo <acme@conectiva.com.br>
32  *	check resource allocation in sr_init and some cleanups
33  */
34 
35 #include <linux/module.h>
36 #include <linux/fs.h>
37 #include <linux/kernel.h>
38 #include <linux/mm.h>
39 #include <linux/bio.h>
40 #include <linux/string.h>
41 #include <linux/errno.h>
42 #include <linux/cdrom.h>
43 #include <linux/interrupt.h>
44 #include <linux/init.h>
45 #include <linux/blkdev.h>
46 #include <linux/mutex.h>
47 #include <linux/slab.h>
48 #include <asm/uaccess.h>
49 
50 #include <scsi/scsi.h>
51 #include <scsi/scsi_dbg.h>
52 #include <scsi/scsi_device.h>
53 #include <scsi/scsi_driver.h>
54 #include <scsi/scsi_cmnd.h>
55 #include <scsi/scsi_eh.h>
56 #include <scsi/scsi_host.h>
57 #include <scsi/scsi_ioctl.h>	/* For the door lock/unlock commands */
58 
59 #include "scsi_logging.h"
60 #include "sr.h"
61 
62 
63 MODULE_DESCRIPTION("SCSI cdrom (sr) driver");
64 MODULE_LICENSE("GPL");
65 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_CDROM_MAJOR);
66 MODULE_ALIAS_SCSI_DEVICE(TYPE_ROM);
67 MODULE_ALIAS_SCSI_DEVICE(TYPE_WORM);
68 
69 #define SR_DISKS	256
70 
71 #define SR_CAPABILITIES \
72 	(CDC_CLOSE_TRAY|CDC_OPEN_TRAY|CDC_LOCK|CDC_SELECT_SPEED| \
73 	 CDC_SELECT_DISC|CDC_MULTI_SESSION|CDC_MCN|CDC_MEDIA_CHANGED| \
74 	 CDC_PLAY_AUDIO|CDC_RESET|CDC_DRIVE_STATUS| \
75 	 CDC_CD_R|CDC_CD_RW|CDC_DVD|CDC_DVD_R|CDC_DVD_RAM|CDC_GENERIC_PACKET| \
76 	 CDC_MRW|CDC_MRW_W|CDC_RAM)
77 
78 static DEFINE_MUTEX(sr_mutex);
79 static int sr_probe(struct device *);
80 static int sr_remove(struct device *);
81 static int sr_done(struct scsi_cmnd *);
82 
83 static struct scsi_driver sr_template = {
84 	.owner			= THIS_MODULE,
85 	.gendrv = {
86 		.name   	= "sr",
87 		.probe		= sr_probe,
88 		.remove		= sr_remove,
89 	},
90 	.done			= sr_done,
91 };
92 
93 static unsigned long sr_index_bits[SR_DISKS / BITS_PER_LONG];
94 static DEFINE_SPINLOCK(sr_index_lock);
95 
96 /* This semaphore is used to mediate the 0->1 reference get in the
97  * face of object destruction (i.e. we can't allow a get on an
98  * object after last put) */
99 static DEFINE_MUTEX(sr_ref_mutex);
100 
101 static int sr_open(struct cdrom_device_info *, int);
102 static void sr_release(struct cdrom_device_info *);
103 
104 static void get_sectorsize(struct scsi_cd *);
105 static void get_capabilities(struct scsi_cd *);
106 
107 static unsigned int sr_check_events(struct cdrom_device_info *cdi,
108 				    unsigned int clearing, int slot);
109 static int sr_packet(struct cdrom_device_info *, struct packet_command *);
110 
111 static struct cdrom_device_ops sr_dops = {
112 	.open			= sr_open,
113 	.release	 	= sr_release,
114 	.drive_status	 	= sr_drive_status,
115 	.check_events		= sr_check_events,
116 	.tray_move		= sr_tray_move,
117 	.lock_door		= sr_lock_door,
118 	.select_speed		= sr_select_speed,
119 	.get_last_session	= sr_get_last_session,
120 	.get_mcn		= sr_get_mcn,
121 	.reset			= sr_reset,
122 	.audio_ioctl		= sr_audio_ioctl,
123 	.capability		= SR_CAPABILITIES,
124 	.generic_packet		= sr_packet,
125 };
126 
127 static void sr_kref_release(struct kref *kref);
128 
129 static inline struct scsi_cd *scsi_cd(struct gendisk *disk)
130 {
131 	return container_of(disk->private_data, struct scsi_cd, driver);
132 }
133 
134 /*
135  * The get and put routines for the struct scsi_cd.  Note this entity
136  * has a scsi_device pointer and owns a reference to this.
137  */
138 static inline struct scsi_cd *scsi_cd_get(struct gendisk *disk)
139 {
140 	struct scsi_cd *cd = NULL;
141 
142 	mutex_lock(&sr_ref_mutex);
143 	if (disk->private_data == NULL)
144 		goto out;
145 	cd = scsi_cd(disk);
146 	kref_get(&cd->kref);
147 	if (scsi_device_get(cd->device))
148 		goto out_put;
149 	goto out;
150 
151  out_put:
152 	kref_put(&cd->kref, sr_kref_release);
153 	cd = NULL;
154  out:
155 	mutex_unlock(&sr_ref_mutex);
156 	return cd;
157 }
158 
159 static void scsi_cd_put(struct scsi_cd *cd)
160 {
161 	struct scsi_device *sdev = cd->device;
162 
163 	mutex_lock(&sr_ref_mutex);
164 	kref_put(&cd->kref, sr_kref_release);
165 	scsi_device_put(sdev);
166 	mutex_unlock(&sr_ref_mutex);
167 }
168 
169 static unsigned int sr_get_events(struct scsi_device *sdev)
170 {
171 	u8 buf[8];
172 	u8 cmd[] = { GET_EVENT_STATUS_NOTIFICATION,
173 		     1,			/* polled */
174 		     0, 0,		/* reserved */
175 		     1 << 4,		/* notification class: media */
176 		     0, 0,		/* reserved */
177 		     0, sizeof(buf),	/* allocation length */
178 		     0,			/* control */
179 	};
180 	struct event_header *eh = (void *)buf;
181 	struct media_event_desc *med = (void *)(buf + 4);
182 	struct scsi_sense_hdr sshdr;
183 	int result;
184 
185 	result = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, sizeof(buf),
186 				  &sshdr, SR_TIMEOUT, MAX_RETRIES, NULL);
187 	if (scsi_sense_valid(&sshdr) && sshdr.sense_key == UNIT_ATTENTION)
188 		return DISK_EVENT_MEDIA_CHANGE;
189 
190 	if (result || be16_to_cpu(eh->data_len) < sizeof(*med))
191 		return 0;
192 
193 	if (eh->nea || eh->notification_class != 0x4)
194 		return 0;
195 
196 	if (med->media_event_code == 1)
197 		return DISK_EVENT_EJECT_REQUEST;
198 	else if (med->media_event_code == 2)
199 		return DISK_EVENT_MEDIA_CHANGE;
200 	return 0;
201 }
202 
203 /*
204  * This function checks to see if the media has been changed or eject
205  * button has been pressed.  It is possible that we have already
206  * sensed a change, or the drive may have sensed one and not yet
207  * reported it.  The past events are accumulated in sdev->changed and
208  * returned together with the current state.
209  */
210 static unsigned int sr_check_events(struct cdrom_device_info *cdi,
211 				    unsigned int clearing, int slot)
212 {
213 	struct scsi_cd *cd = cdi->handle;
214 	bool last_present;
215 	struct scsi_sense_hdr sshdr;
216 	unsigned int events;
217 	int ret;
218 
219 	/* no changer support */
220 	if (CDSL_CURRENT != slot)
221 		return 0;
222 
223 	events = sr_get_events(cd->device);
224 	/*
225 	 * GET_EVENT_STATUS_NOTIFICATION is enough unless MEDIA_CHANGE
226 	 * is being cleared.  Note that there are devices which hang
227 	 * if asked to execute TUR repeatedly.
228 	 */
229 	if (!(clearing & DISK_EVENT_MEDIA_CHANGE))
230 		goto skip_tur;
231 
232 	/* let's see whether the media is there with TUR */
233 	last_present = cd->media_present;
234 	ret = scsi_test_unit_ready(cd->device, SR_TIMEOUT, MAX_RETRIES, &sshdr);
235 
236 	/*
237 	 * Media is considered to be present if TUR succeeds or fails with
238 	 * sense data indicating something other than media-not-present
239 	 * (ASC 0x3a).
240 	 */
241 	cd->media_present = scsi_status_is_good(ret) ||
242 		(scsi_sense_valid(&sshdr) && sshdr.asc != 0x3a);
243 
244 	if (last_present != cd->media_present)
245 		events |= DISK_EVENT_MEDIA_CHANGE;
246 skip_tur:
247 	if (cd->device->changed) {
248 		events |= DISK_EVENT_MEDIA_CHANGE;
249 		cd->device->changed = 0;
250 	}
251 
252 	return events;
253 }
254 
255 /*
256  * sr_done is the interrupt routine for the device driver.
257  *
258  * It will be notified on the end of a SCSI read / write, and will take one
259  * of several actions based on success or failure.
260  */
261 static int sr_done(struct scsi_cmnd *SCpnt)
262 {
263 	int result = SCpnt->result;
264 	int this_count = scsi_bufflen(SCpnt);
265 	int good_bytes = (result == 0 ? this_count : 0);
266 	int block_sectors = 0;
267 	long error_sector;
268 	struct scsi_cd *cd = scsi_cd(SCpnt->request->rq_disk);
269 
270 #ifdef DEBUG
271 	printk("sr.c done: %x\n", result);
272 #endif
273 
274 	/*
275 	 * Handle MEDIUM ERRORs or VOLUME OVERFLOWs that indicate partial
276 	 * success.  Since this is a relatively rare error condition, no
277 	 * care is taken to avoid unnecessary additional work such as
278 	 * memcpy's that could be avoided.
279 	 */
280 	if (driver_byte(result) != 0 &&		/* An error occurred */
281 	    (SCpnt->sense_buffer[0] & 0x7f) == 0x70) { /* Sense current */
282 		switch (SCpnt->sense_buffer[2]) {
283 		case MEDIUM_ERROR:
284 		case VOLUME_OVERFLOW:
285 		case ILLEGAL_REQUEST:
286 			if (!(SCpnt->sense_buffer[0] & 0x90))
287 				break;
288 			error_sector = (SCpnt->sense_buffer[3] << 24) |
289 				(SCpnt->sense_buffer[4] << 16) |
290 				(SCpnt->sense_buffer[5] << 8) |
291 				SCpnt->sense_buffer[6];
292 			if (SCpnt->request->bio != NULL)
293 				block_sectors =
294 					bio_sectors(SCpnt->request->bio);
295 			if (block_sectors < 4)
296 				block_sectors = 4;
297 			if (cd->device->sector_size == 2048)
298 				error_sector <<= 2;
299 			error_sector &= ~(block_sectors - 1);
300 			good_bytes = (error_sector -
301 				      blk_rq_pos(SCpnt->request)) << 9;
302 			if (good_bytes < 0 || good_bytes >= this_count)
303 				good_bytes = 0;
304 			/*
305 			 * The SCSI specification allows for the value
306 			 * returned by READ CAPACITY to be up to 75 2K
307 			 * sectors past the last readable block.
308 			 * Therefore, if we hit a medium error within the
309 			 * last 75 2K sectors, we decrease the saved size
310 			 * value.
311 			 */
312 			if (error_sector < get_capacity(cd->disk) &&
313 			    cd->capacity - error_sector < 4 * 75)
314 				set_capacity(cd->disk, error_sector);
315 			break;
316 
317 		case RECOVERED_ERROR:
318 			good_bytes = this_count;
319 			break;
320 
321 		default:
322 			break;
323 		}
324 	}
325 
326 	return good_bytes;
327 }
328 
329 static int sr_prep_fn(struct request_queue *q, struct request *rq)
330 {
331 	int block = 0, this_count, s_size;
332 	struct scsi_cd *cd;
333 	struct scsi_cmnd *SCpnt;
334 	struct scsi_device *sdp = q->queuedata;
335 	int ret;
336 
337 	if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
338 		ret = scsi_setup_blk_pc_cmnd(sdp, rq);
339 		goto out;
340 	} else if (rq->cmd_type != REQ_TYPE_FS) {
341 		ret = BLKPREP_KILL;
342 		goto out;
343 	}
344 	ret = scsi_setup_fs_cmnd(sdp, rq);
345 	if (ret != BLKPREP_OK)
346 		goto out;
347 	SCpnt = rq->special;
348 	cd = scsi_cd(rq->rq_disk);
349 
350 	/* from here on until we're complete, any goto out
351 	 * is used for a killable error condition */
352 	ret = BLKPREP_KILL;
353 
354 	SCSI_LOG_HLQUEUE(1, printk("Doing sr request, dev = %s, block = %d\n",
355 				cd->disk->disk_name, block));
356 
357 	if (!cd->device || !scsi_device_online(cd->device)) {
358 		SCSI_LOG_HLQUEUE(2, printk("Finishing %u sectors\n",
359 					   blk_rq_sectors(rq)));
360 		SCSI_LOG_HLQUEUE(2, printk("Retry with 0x%p\n", SCpnt));
361 		goto out;
362 	}
363 
364 	if (cd->device->changed) {
365 		/*
366 		 * quietly refuse to do anything to a changed disc until the
367 		 * changed bit has been reset
368 		 */
369 		goto out;
370 	}
371 
372 	/*
373 	 * we do lazy blocksize switching (when reading XA sectors,
374 	 * see CDROMREADMODE2 ioctl)
375 	 */
376 	s_size = cd->device->sector_size;
377 	if (s_size > 2048) {
378 		if (!in_interrupt())
379 			sr_set_blocklength(cd, 2048);
380 		else
381 			printk("sr: can't switch blocksize: in interrupt\n");
382 	}
383 
384 	if (s_size != 512 && s_size != 1024 && s_size != 2048) {
385 		scmd_printk(KERN_ERR, SCpnt, "bad sector size %d\n", s_size);
386 		goto out;
387 	}
388 
389 	if (rq_data_dir(rq) == WRITE) {
390 		if (!cd->device->writeable)
391 			goto out;
392 		SCpnt->cmnd[0] = WRITE_10;
393 		SCpnt->sc_data_direction = DMA_TO_DEVICE;
394  	 	cd->cdi.media_written = 1;
395 	} else if (rq_data_dir(rq) == READ) {
396 		SCpnt->cmnd[0] = READ_10;
397 		SCpnt->sc_data_direction = DMA_FROM_DEVICE;
398 	} else {
399 		blk_dump_rq_flags(rq, "Unknown sr command");
400 		goto out;
401 	}
402 
403 	{
404 		struct scatterlist *sg;
405 		int i, size = 0, sg_count = scsi_sg_count(SCpnt);
406 
407 		scsi_for_each_sg(SCpnt, sg, sg_count, i)
408 			size += sg->length;
409 
410 		if (size != scsi_bufflen(SCpnt)) {
411 			scmd_printk(KERN_ERR, SCpnt,
412 				"mismatch count %d, bytes %d\n",
413 				size, scsi_bufflen(SCpnt));
414 			if (scsi_bufflen(SCpnt) > size)
415 				SCpnt->sdb.length = size;
416 		}
417 	}
418 
419 	/*
420 	 * request doesn't start on hw block boundary, add scatter pads
421 	 */
422 	if (((unsigned int)blk_rq_pos(rq) % (s_size >> 9)) ||
423 	    (scsi_bufflen(SCpnt) % s_size)) {
424 		scmd_printk(KERN_NOTICE, SCpnt, "unaligned transfer\n");
425 		goto out;
426 	}
427 
428 	this_count = (scsi_bufflen(SCpnt) >> 9) / (s_size >> 9);
429 
430 
431 	SCSI_LOG_HLQUEUE(2, printk("%s : %s %d/%u 512 byte blocks.\n",
432 				cd->cdi.name,
433 				(rq_data_dir(rq) == WRITE) ?
434 					"writing" : "reading",
435 				this_count, blk_rq_sectors(rq)));
436 
437 	SCpnt->cmnd[1] = 0;
438 	block = (unsigned int)blk_rq_pos(rq) / (s_size >> 9);
439 
440 	if (this_count > 0xffff) {
441 		this_count = 0xffff;
442 		SCpnt->sdb.length = this_count * s_size;
443 	}
444 
445 	SCpnt->cmnd[2] = (unsigned char) (block >> 24) & 0xff;
446 	SCpnt->cmnd[3] = (unsigned char) (block >> 16) & 0xff;
447 	SCpnt->cmnd[4] = (unsigned char) (block >> 8) & 0xff;
448 	SCpnt->cmnd[5] = (unsigned char) block & 0xff;
449 	SCpnt->cmnd[6] = SCpnt->cmnd[9] = 0;
450 	SCpnt->cmnd[7] = (unsigned char) (this_count >> 8) & 0xff;
451 	SCpnt->cmnd[8] = (unsigned char) this_count & 0xff;
452 
453 	/*
454 	 * We shouldn't disconnect in the middle of a sector, so with a dumb
455 	 * host adapter, it's safe to assume that we can at least transfer
456 	 * this many bytes between each connect / disconnect.
457 	 */
458 	SCpnt->transfersize = cd->device->sector_size;
459 	SCpnt->underflow = this_count << 9;
460 	SCpnt->allowed = MAX_RETRIES;
461 
462 	/*
463 	 * This indicates that the command is ready from our end to be
464 	 * queued.
465 	 */
466 	ret = BLKPREP_OK;
467  out:
468 	return scsi_prep_return(q, rq, ret);
469 }
470 
471 static int sr_block_open(struct block_device *bdev, fmode_t mode)
472 {
473 	struct scsi_cd *cd;
474 	int ret = -ENXIO;
475 
476 	mutex_lock(&sr_mutex);
477 	cd = scsi_cd_get(bdev->bd_disk);
478 	if (cd) {
479 		ret = cdrom_open(&cd->cdi, bdev, mode);
480 		if (ret)
481 			scsi_cd_put(cd);
482 	}
483 	mutex_unlock(&sr_mutex);
484 	return ret;
485 }
486 
487 static int sr_block_release(struct gendisk *disk, fmode_t mode)
488 {
489 	struct scsi_cd *cd = scsi_cd(disk);
490 	mutex_lock(&sr_mutex);
491 	cdrom_release(&cd->cdi, mode);
492 	scsi_cd_put(cd);
493 	mutex_unlock(&sr_mutex);
494 	return 0;
495 }
496 
497 static int sr_block_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd,
498 			  unsigned long arg)
499 {
500 	struct scsi_cd *cd = scsi_cd(bdev->bd_disk);
501 	struct scsi_device *sdev = cd->device;
502 	void __user *argp = (void __user *)arg;
503 	int ret;
504 
505 	mutex_lock(&sr_mutex);
506 
507 	/*
508 	 * Send SCSI addressing ioctls directly to mid level, send other
509 	 * ioctls to cdrom/block level.
510 	 */
511 	switch (cmd) {
512 	case SCSI_IOCTL_GET_IDLUN:
513 	case SCSI_IOCTL_GET_BUS_NUMBER:
514 		ret = scsi_ioctl(sdev, cmd, argp);
515 		goto out;
516 	}
517 
518 	ret = cdrom_ioctl(&cd->cdi, bdev, mode, cmd, arg);
519 	if (ret != -ENOSYS)
520 		goto out;
521 
522 	/*
523 	 * ENODEV means that we didn't recognise the ioctl, or that we
524 	 * cannot execute it in the current device state.  In either
525 	 * case fall through to scsi_ioctl, which will return ENDOEV again
526 	 * if it doesn't recognise the ioctl
527 	 */
528 	ret = scsi_nonblockable_ioctl(sdev, cmd, argp,
529 					(mode & FMODE_NDELAY) != 0);
530 	if (ret != -ENODEV)
531 		goto out;
532 	ret = scsi_ioctl(sdev, cmd, argp);
533 
534 out:
535 	mutex_unlock(&sr_mutex);
536 	return ret;
537 }
538 
539 static unsigned int sr_block_check_events(struct gendisk *disk,
540 					  unsigned int clearing)
541 {
542 	struct scsi_cd *cd = scsi_cd(disk);
543 	return cdrom_check_events(&cd->cdi, clearing);
544 }
545 
546 static int sr_block_revalidate_disk(struct gendisk *disk)
547 {
548 	struct scsi_cd *cd = scsi_cd(disk);
549 	struct scsi_sense_hdr sshdr;
550 
551 	/* if the unit is not ready, nothing more to do */
552 	if (scsi_test_unit_ready(cd->device, SR_TIMEOUT, MAX_RETRIES, &sshdr))
553 		return 0;
554 
555 	sr_cd_check(&cd->cdi);
556 	get_sectorsize(cd);
557 	return 0;
558 }
559 
560 static const struct block_device_operations sr_bdops =
561 {
562 	.owner		= THIS_MODULE,
563 	.open		= sr_block_open,
564 	.release	= sr_block_release,
565 	.ioctl		= sr_block_ioctl,
566 	.check_events	= sr_block_check_events,
567 	.revalidate_disk = sr_block_revalidate_disk,
568 	/*
569 	 * No compat_ioctl for now because sr_block_ioctl never
570 	 * seems to pass arbitrary ioctls down to host drivers.
571 	 */
572 };
573 
574 static int sr_open(struct cdrom_device_info *cdi, int purpose)
575 {
576 	struct scsi_cd *cd = cdi->handle;
577 	struct scsi_device *sdev = cd->device;
578 	int retval;
579 
580 	/*
581 	 * If the device is in error recovery, wait until it is done.
582 	 * If the device is offline, then disallow any access to it.
583 	 */
584 	retval = -ENXIO;
585 	if (!scsi_block_when_processing_errors(sdev))
586 		goto error_out;
587 
588 	return 0;
589 
590 error_out:
591 	return retval;
592 }
593 
594 static void sr_release(struct cdrom_device_info *cdi)
595 {
596 	struct scsi_cd *cd = cdi->handle;
597 
598 	if (cd->device->sector_size > 2048)
599 		sr_set_blocklength(cd, 2048);
600 
601 }
602 
603 static int sr_probe(struct device *dev)
604 {
605 	struct scsi_device *sdev = to_scsi_device(dev);
606 	struct gendisk *disk;
607 	struct scsi_cd *cd;
608 	int minor, error;
609 
610 	error = -ENODEV;
611 	if (sdev->type != TYPE_ROM && sdev->type != TYPE_WORM)
612 		goto fail;
613 
614 	error = -ENOMEM;
615 	cd = kzalloc(sizeof(*cd), GFP_KERNEL);
616 	if (!cd)
617 		goto fail;
618 
619 	kref_init(&cd->kref);
620 
621 	disk = alloc_disk(1);
622 	if (!disk)
623 		goto fail_free;
624 
625 	spin_lock(&sr_index_lock);
626 	minor = find_first_zero_bit(sr_index_bits, SR_DISKS);
627 	if (minor == SR_DISKS) {
628 		spin_unlock(&sr_index_lock);
629 		error = -EBUSY;
630 		goto fail_put;
631 	}
632 	__set_bit(minor, sr_index_bits);
633 	spin_unlock(&sr_index_lock);
634 
635 	disk->major = SCSI_CDROM_MAJOR;
636 	disk->first_minor = minor;
637 	sprintf(disk->disk_name, "sr%d", minor);
638 	disk->fops = &sr_bdops;
639 	disk->flags = GENHD_FL_CD | GENHD_FL_BLOCK_EVENTS_ON_EXCL_WRITE;
640 	disk->events = DISK_EVENT_MEDIA_CHANGE | DISK_EVENT_EJECT_REQUEST;
641 
642 	blk_queue_rq_timeout(sdev->request_queue, SR_TIMEOUT);
643 
644 	cd->device = sdev;
645 	cd->disk = disk;
646 	cd->driver = &sr_template;
647 	cd->disk = disk;
648 	cd->capacity = 0x1fffff;
649 	cd->device->changed = 1;	/* force recheck CD type */
650 	cd->media_present = 1;
651 	cd->use = 1;
652 	cd->readcd_known = 0;
653 	cd->readcd_cdda = 0;
654 
655 	cd->cdi.ops = &sr_dops;
656 	cd->cdi.handle = cd;
657 	cd->cdi.mask = 0;
658 	cd->cdi.capacity = 1;
659 	sprintf(cd->cdi.name, "sr%d", minor);
660 
661 	sdev->sector_size = 2048;	/* A guess, just in case */
662 
663 	/* FIXME: need to handle a get_capabilities failure properly ?? */
664 	get_capabilities(cd);
665 	blk_queue_prep_rq(sdev->request_queue, sr_prep_fn);
666 	sr_vendor_init(cd);
667 
668 	disk->driverfs_dev = &sdev->sdev_gendev;
669 	set_capacity(disk, cd->capacity);
670 	disk->private_data = &cd->driver;
671 	disk->queue = sdev->request_queue;
672 	cd->cdi.disk = disk;
673 
674 	if (register_cdrom(&cd->cdi))
675 		goto fail_put;
676 
677 	dev_set_drvdata(dev, cd);
678 	disk->flags |= GENHD_FL_REMOVABLE;
679 	add_disk(disk);
680 
681 	sdev_printk(KERN_DEBUG, sdev,
682 		    "Attached scsi CD-ROM %s\n", cd->cdi.name);
683 	return 0;
684 
685 fail_put:
686 	put_disk(disk);
687 fail_free:
688 	kfree(cd);
689 fail:
690 	return error;
691 }
692 
693 
694 static void get_sectorsize(struct scsi_cd *cd)
695 {
696 	unsigned char cmd[10];
697 	unsigned char buffer[8];
698 	int the_result, retries = 3;
699 	int sector_size;
700 	struct request_queue *queue;
701 
702 	do {
703 		cmd[0] = READ_CAPACITY;
704 		memset((void *) &cmd[1], 0, 9);
705 		memset(buffer, 0, sizeof(buffer));
706 
707 		/* Do the command and wait.. */
708 		the_result = scsi_execute_req(cd->device, cmd, DMA_FROM_DEVICE,
709 					      buffer, sizeof(buffer), NULL,
710 					      SR_TIMEOUT, MAX_RETRIES, NULL);
711 
712 		retries--;
713 
714 	} while (the_result && retries);
715 
716 
717 	if (the_result) {
718 		cd->capacity = 0x1fffff;
719 		sector_size = 2048;	/* A guess, just in case */
720 	} else {
721 		long last_written;
722 
723 		cd->capacity = 1 + ((buffer[0] << 24) | (buffer[1] << 16) |
724 				    (buffer[2] << 8) | buffer[3]);
725 		/*
726 		 * READ_CAPACITY doesn't return the correct size on
727 		 * certain UDF media.  If last_written is larger, use
728 		 * it instead.
729 		 *
730 		 * http://bugzilla.kernel.org/show_bug.cgi?id=9668
731 		 */
732 		if (!cdrom_get_last_written(&cd->cdi, &last_written))
733 			cd->capacity = max_t(long, cd->capacity, last_written);
734 
735 		sector_size = (buffer[4] << 24) |
736 		    (buffer[5] << 16) | (buffer[6] << 8) | buffer[7];
737 		switch (sector_size) {
738 			/*
739 			 * HP 4020i CD-Recorder reports 2340 byte sectors
740 			 * Philips CD-Writers report 2352 byte sectors
741 			 *
742 			 * Use 2k sectors for them..
743 			 */
744 		case 0:
745 		case 2340:
746 		case 2352:
747 			sector_size = 2048;
748 			/* fall through */
749 		case 2048:
750 			cd->capacity *= 4;
751 			/* fall through */
752 		case 512:
753 			break;
754 		default:
755 			printk("%s: unsupported sector size %d.\n",
756 			       cd->cdi.name, sector_size);
757 			cd->capacity = 0;
758 		}
759 
760 		cd->device->sector_size = sector_size;
761 
762 		/*
763 		 * Add this so that we have the ability to correctly gauge
764 		 * what the device is capable of.
765 		 */
766 		set_capacity(cd->disk, cd->capacity);
767 	}
768 
769 	queue = cd->device->request_queue;
770 	blk_queue_logical_block_size(queue, sector_size);
771 
772 	return;
773 }
774 
775 static void get_capabilities(struct scsi_cd *cd)
776 {
777 	unsigned char *buffer;
778 	struct scsi_mode_data data;
779 	struct scsi_sense_hdr sshdr;
780 	int rc, n;
781 
782 	static const char *loadmech[] =
783 	{
784 		"caddy",
785 		"tray",
786 		"pop-up",
787 		"",
788 		"changer",
789 		"cartridge changer",
790 		"",
791 		""
792 	};
793 
794 
795 	/* allocate transfer buffer */
796 	buffer = kmalloc(512, GFP_KERNEL | GFP_DMA);
797 	if (!buffer) {
798 		printk(KERN_ERR "sr: out of memory.\n");
799 		return;
800 	}
801 
802 	/* eat unit attentions */
803 	scsi_test_unit_ready(cd->device, SR_TIMEOUT, MAX_RETRIES, &sshdr);
804 
805 	/* ask for mode page 0x2a */
806 	rc = scsi_mode_sense(cd->device, 0, 0x2a, buffer, 128,
807 			     SR_TIMEOUT, 3, &data, NULL);
808 
809 	if (!scsi_status_is_good(rc)) {
810 		/* failed, drive doesn't have capabilities mode page */
811 		cd->cdi.speed = 1;
812 		cd->cdi.mask |= (CDC_CD_R | CDC_CD_RW | CDC_DVD_R |
813 				 CDC_DVD | CDC_DVD_RAM |
814 				 CDC_SELECT_DISC | CDC_SELECT_SPEED |
815 				 CDC_MRW | CDC_MRW_W | CDC_RAM);
816 		kfree(buffer);
817 		printk("%s: scsi-1 drive\n", cd->cdi.name);
818 		return;
819 	}
820 
821 	n = data.header_length + data.block_descriptor_length;
822 	cd->cdi.speed = ((buffer[n + 8] << 8) + buffer[n + 9]) / 176;
823 	cd->readcd_known = 1;
824 	cd->readcd_cdda = buffer[n + 5] & 0x01;
825 	/* print some capability bits */
826 	printk("%s: scsi3-mmc drive: %dx/%dx %s%s%s%s%s%s\n", cd->cdi.name,
827 	       ((buffer[n + 14] << 8) + buffer[n + 15]) / 176,
828 	       cd->cdi.speed,
829 	       buffer[n + 3] & 0x01 ? "writer " : "", /* CD Writer */
830 	       buffer[n + 3] & 0x20 ? "dvd-ram " : "",
831 	       buffer[n + 2] & 0x02 ? "cd/rw " : "", /* can read rewriteable */
832 	       buffer[n + 4] & 0x20 ? "xa/form2 " : "",	/* can read xa/from2 */
833 	       buffer[n + 5] & 0x01 ? "cdda " : "", /* can read audio data */
834 	       loadmech[buffer[n + 6] >> 5]);
835 	if ((buffer[n + 6] >> 5) == 0)
836 		/* caddy drives can't close tray... */
837 		cd->cdi.mask |= CDC_CLOSE_TRAY;
838 	if ((buffer[n + 2] & 0x8) == 0)
839 		/* not a DVD drive */
840 		cd->cdi.mask |= CDC_DVD;
841 	if ((buffer[n + 3] & 0x20) == 0)
842 		/* can't write DVD-RAM media */
843 		cd->cdi.mask |= CDC_DVD_RAM;
844 	if ((buffer[n + 3] & 0x10) == 0)
845 		/* can't write DVD-R media */
846 		cd->cdi.mask |= CDC_DVD_R;
847 	if ((buffer[n + 3] & 0x2) == 0)
848 		/* can't write CD-RW media */
849 		cd->cdi.mask |= CDC_CD_RW;
850 	if ((buffer[n + 3] & 0x1) == 0)
851 		/* can't write CD-R media */
852 		cd->cdi.mask |= CDC_CD_R;
853 	if ((buffer[n + 6] & 0x8) == 0)
854 		/* can't eject */
855 		cd->cdi.mask |= CDC_OPEN_TRAY;
856 
857 	if ((buffer[n + 6] >> 5) == mechtype_individual_changer ||
858 	    (buffer[n + 6] >> 5) == mechtype_cartridge_changer)
859 		cd->cdi.capacity =
860 		    cdrom_number_of_slots(&cd->cdi);
861 	if (cd->cdi.capacity <= 1)
862 		/* not a changer */
863 		cd->cdi.mask |= CDC_SELECT_DISC;
864 	/*else    I don't think it can close its tray
865 		cd->cdi.mask |= CDC_CLOSE_TRAY; */
866 
867 	/*
868 	 * if DVD-RAM, MRW-W or CD-RW, we are randomly writable
869 	 */
870 	if ((cd->cdi.mask & (CDC_DVD_RAM | CDC_MRW_W | CDC_RAM | CDC_CD_RW)) !=
871 			(CDC_DVD_RAM | CDC_MRW_W | CDC_RAM | CDC_CD_RW)) {
872 		cd->device->writeable = 1;
873 	}
874 
875 	kfree(buffer);
876 }
877 
878 /*
879  * sr_packet() is the entry point for the generic commands generated
880  * by the Uniform CD-ROM layer.
881  */
882 static int sr_packet(struct cdrom_device_info *cdi,
883 		struct packet_command *cgc)
884 {
885 	struct scsi_cd *cd = cdi->handle;
886 	struct scsi_device *sdev = cd->device;
887 
888 	if (cgc->cmd[0] == GPCMD_READ_DISC_INFO && sdev->no_read_disc_info)
889 		return -EDRIVE_CANT_DO_THIS;
890 
891 	if (cgc->timeout <= 0)
892 		cgc->timeout = IOCTL_TIMEOUT;
893 
894 	sr_do_ioctl(cd, cgc);
895 
896 	return cgc->stat;
897 }
898 
899 /**
900  *	sr_kref_release - Called to free the scsi_cd structure
901  *	@kref: pointer to embedded kref
902  *
903  *	sr_ref_mutex must be held entering this routine.  Because it is
904  *	called on last put, you should always use the scsi_cd_get()
905  *	scsi_cd_put() helpers which manipulate the semaphore directly
906  *	and never do a direct kref_put().
907  **/
908 static void sr_kref_release(struct kref *kref)
909 {
910 	struct scsi_cd *cd = container_of(kref, struct scsi_cd, kref);
911 	struct gendisk *disk = cd->disk;
912 
913 	spin_lock(&sr_index_lock);
914 	clear_bit(MINOR(disk_devt(disk)), sr_index_bits);
915 	spin_unlock(&sr_index_lock);
916 
917 	unregister_cdrom(&cd->cdi);
918 
919 	disk->private_data = NULL;
920 
921 	put_disk(disk);
922 
923 	kfree(cd);
924 }
925 
926 static int sr_remove(struct device *dev)
927 {
928 	struct scsi_cd *cd = dev_get_drvdata(dev);
929 
930 	blk_queue_prep_rq(cd->device->request_queue, scsi_prep_fn);
931 	del_gendisk(cd->disk);
932 
933 	mutex_lock(&sr_ref_mutex);
934 	kref_put(&cd->kref, sr_kref_release);
935 	mutex_unlock(&sr_ref_mutex);
936 
937 	return 0;
938 }
939 
940 static int __init init_sr(void)
941 {
942 	int rc;
943 
944 	rc = register_blkdev(SCSI_CDROM_MAJOR, "sr");
945 	if (rc)
946 		return rc;
947 	rc = scsi_register_driver(&sr_template.gendrv);
948 	if (rc)
949 		unregister_blkdev(SCSI_CDROM_MAJOR, "sr");
950 
951 	return rc;
952 }
953 
954 static void __exit exit_sr(void)
955 {
956 	scsi_unregister_driver(&sr_template.gendrv);
957 	unregister_blkdev(SCSI_CDROM_MAJOR, "sr");
958 }
959 
960 module_init(init_sr);
961 module_exit(exit_sr);
962 MODULE_LICENSE("GPL");
963