1 /* 2 * Copyright 2014 Cisco Systems, Inc. All rights reserved. 3 * 4 * This program is free software; you may redistribute it and/or modify 5 * it under the terms of the GNU General Public License as published by 6 * the Free Software Foundation; version 2 of the License. 7 * 8 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 9 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF 10 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 11 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS 12 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN 13 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 14 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE 15 * SOFTWARE. 16 */ 17 18 #ifndef __SNIC_FWINT_H 19 #define __SNIC_FWINT_H 20 21 #define SNIC_CDB_LEN 32 /* SCSI CDB size 32, can be used for 16 bytes */ 22 #define LUN_ADDR_LEN 8 23 24 /* 25 * Command entry type 26 */ 27 enum snic_io_type { 28 /* 29 * Initiator request types 30 */ 31 SNIC_REQ_REPORT_TGTS = 0x2, /* Report Targets */ 32 SNIC_REQ_ICMND, /* Initiator command for SCSI IO */ 33 SNIC_REQ_ITMF, /* Initiator command for Task Mgmt */ 34 SNIC_REQ_HBA_RESET, /* SNIC Reset */ 35 SNIC_REQ_EXCH_VER, /* Exchange Version Information */ 36 SNIC_REQ_TGT_INFO, /* Backend/Target Information */ 37 SNIC_REQ_BOOT_LUNS, 38 39 /* 40 * Response type 41 */ 42 SNIC_RSP_REPORT_TGTS_CMPL = 0x12,/* Report Targets Completion */ 43 SNIC_RSP_ICMND_CMPL, /* SCSI IO Completion */ 44 SNIC_RSP_ITMF_CMPL, /* Task Management Completion */ 45 SNIC_RSP_HBA_RESET_CMPL, /* SNIC Reset Completion */ 46 SNIC_RSP_EXCH_VER_CMPL, /* Exchange Version Completion*/ 47 SNIC_RSP_BOOT_LUNS_CMPL, 48 49 /* 50 * Misc Request types 51 */ 52 SNIC_MSG_ACK = 0x80, /* Ack: snic_notify_msg */ 53 SNIC_MSG_ASYNC_EVNOTIFY, /* Asynchronous Event Notification */ 54 }; /* end of enum snic_io_type */ 55 56 57 /* 58 * Header status codes from firmware 59 */ 60 enum snic_io_status { 61 SNIC_STAT_IO_SUCCESS = 0, /* request was successful */ 62 63 /* 64 * If a request to the fw is rejected, the original request header 65 * will be returned with the status set to one of the following: 66 */ 67 SNIC_STAT_INVALID_HDR, /* header contains invalid data */ 68 SNIC_STAT_OUT_OF_RES, /* out of resources to complete request */ 69 SNIC_STAT_INVALID_PARM, /* some parameter in request is not valid */ 70 SNIC_STAT_REQ_NOT_SUP, /* req type is not supported */ 71 SNIC_STAT_IO_NOT_FOUND, /* requested IO was not found */ 72 73 /* 74 * Once a request is processed, the fw will usually return 75 * a cmpl message type. In cases where errors occurred, 76 * the header status would be filled in with one of the following: 77 */ 78 SNIC_STAT_ABORTED, /* req was aborted */ 79 SNIC_STAT_TIMEOUT, /* req was timed out */ 80 SNIC_STAT_SGL_INVALID, /* req was aborted due to sgl error */ 81 SNIC_STAT_DATA_CNT_MISMATCH, /*recv/sent more/less data than expec */ 82 SNIC_STAT_FW_ERR, /* req was terminated due to fw error */ 83 SNIC_STAT_ITMF_REJECT, /* itmf req was rejected by target */ 84 SNIC_STAT_ITMF_FAIL, /* itmf req was failed */ 85 SNIC_STAT_ITMF_INCORRECT_LUN, /* itmf req has incorrect LUN id*/ 86 SNIC_STAT_CMND_REJECT, /* req was invalid and rejected */ 87 SNIC_STAT_DEV_OFFLINE, /* req sent to offline device */ 88 SNIC_STAT_NO_BOOTLUN, 89 SNIC_STAT_SCSI_ERR, /* SCSI error returned by Target. */ 90 SNIC_STAT_NOT_READY, /* sNIC Subsystem is not ready */ 91 SNIC_STAT_FATAL_ERROR, /* sNIC is in unrecoverable state */ 92 }; /* end of enum snic_io_status */ 93 94 /* 95 * snic_io_hdr : host <--> firmare 96 * 97 * for any other message that will be queued to firmware should 98 * have the following request header 99 */ 100 struct snic_io_hdr { 101 __le32 hid; 102 __le32 cmnd_id; /* tag here */ 103 ulong init_ctx; /* initiator context */ 104 u8 type; /* request/response type */ 105 u8 status; /* header status entry */ 106 u8 protocol; /* Protocol specific, may needed for RoCE*/ 107 u8 flags; 108 __le16 sg_cnt; 109 u16 resvd; 110 }; 111 112 /* auxillary funciton for encoding the snic_io_hdr */ 113 static inline void 114 snic_io_hdr_enc(struct snic_io_hdr *hdr, u8 typ, u8 status, u32 id, u32 hid, 115 u16 sg_cnt, ulong ctx) 116 { 117 hdr->type = typ; 118 hdr->status = status; 119 hdr->protocol = 0; 120 hdr->hid = cpu_to_le32(hid); 121 hdr->cmnd_id = cpu_to_le32(id); 122 hdr->sg_cnt = cpu_to_le16(sg_cnt); 123 hdr->init_ctx = ctx; 124 hdr->flags = 0; 125 } 126 127 /* auxillary funciton for decoding the snic_io_hdr */ 128 static inline void 129 snic_io_hdr_dec(struct snic_io_hdr *hdr, u8 *typ, u8 *stat, u32 *cmnd_id, 130 u32 *hid, ulong *ctx) 131 { 132 *typ = hdr->type; 133 *stat = hdr->status; 134 *hid = le32_to_cpu(hdr->hid); 135 *cmnd_id = le32_to_cpu(hdr->cmnd_id); 136 *ctx = hdr->init_ctx; 137 } 138 139 /* 140 * snic_host_info: host -> firmware 141 * 142 * Used for sending host information to firmware, and request fw version 143 */ 144 struct snic_exch_ver_req { 145 __le32 drvr_ver; /* for debugging, when fw dump captured */ 146 __le32 os_type; /* for OS specific features */ 147 }; 148 149 /* 150 * os_type flags 151 * Bit 0-7 : OS information 152 * Bit 8-31: Feature/Capability Information 153 */ 154 #define SNIC_OS_LINUX 0x1 155 #define SNIC_OS_WIN 0x2 156 #define SNIC_OS_ESX 0x3 157 158 /* 159 * HBA Capabilities 160 * Bit 1: Reserved. 161 * Bit 2: Dynamic Discovery of LUNs. 162 * Bit 3: Async event notifications on on tgt online/offline events. 163 * Bit 4: IO timeout support in FW. 164 * Bit 5-31: Reserved. 165 */ 166 #define SNIC_HBA_CAP_DDL 0x02 /* Supports Dynamic Discovery of LUNs */ 167 #define SNIC_HBA_CAP_AEN 0x04 /* Supports Async Event Noitifcation */ 168 #define SNIC_HBA_CAP_TMO 0x08 /* Supports IO timeout in FW */ 169 170 /* 171 * snic_exch_ver_rsp : firmware -> host 172 * 173 * Used by firmware to send response to version request 174 */ 175 struct snic_exch_ver_rsp { 176 __le32 version; 177 __le32 hid; 178 __le32 max_concur_ios; /* max concurrent ios */ 179 __le32 max_sgs_per_cmd; /* max sgls per IO */ 180 __le32 max_io_sz; /* max io size supported */ 181 __le32 hba_cap; /* hba capabilities */ 182 __le32 max_tgts; /* max tgts supported */ 183 __le16 io_timeout; /* FW extended timeout */ 184 u16 rsvd; 185 }; 186 187 188 /* 189 * snic_report_tgts : host -> firmware request 190 * 191 * Used by the host to request list of targets 192 */ 193 struct snic_report_tgts { 194 __le16 sg_cnt; 195 __le16 flags; /* specific flags from fw */ 196 u8 _resvd[4]; 197 __le64 sg_addr; /* Points to SGL */ 198 __le64 sense_addr; 199 }; 200 201 enum snic_type { 202 SNIC_NONE = 0x0, 203 SNIC_DAS, 204 SNIC_SAN, 205 }; 206 207 208 /* Report Target Response */ 209 enum snic_tgt_type { 210 SNIC_TGT_NONE = 0x0, 211 SNIC_TGT_DAS, /* DAS Target */ 212 SNIC_TGT_SAN, /* SAN Target */ 213 }; 214 215 /* target id format */ 216 struct snic_tgt_id { 217 __le32 tgt_id; /* target id */ 218 __le16 tgt_type; /* tgt type */ 219 __le16 vnic_id; /* corresponding vnic id */ 220 }; 221 222 /* 223 * snic_report_tgts_cmpl : firmware -> host response 224 * 225 * Used by firmware to send response to Report Targets request 226 */ 227 struct snic_report_tgts_cmpl { 228 __le32 tgt_cnt; /* Number of Targets accessible */ 229 u32 _resvd; 230 }; 231 232 /* 233 * Command flags 234 * 235 * Bit 0: Read flags 236 * Bit 1: Write flag 237 * Bit 2: ESGL - sg/esg array contains extended sg 238 * ESGE - is a host buffer contains sg elements 239 * Bit 3-4: Task Attributes 240 * 00b - simple 241 * 01b - head of queue 242 * 10b - ordered 243 * Bit 5-7: Priority - future use 244 * Bit 8-15: Reserved 245 */ 246 247 #define SNIC_ICMND_WR 0x01 /* write command */ 248 #define SNIC_ICMND_RD 0x02 /* read command */ 249 #define SNIC_ICMND_ESGL 0x04 /* SGE/ESGE array contains valid data*/ 250 251 /* 252 * Priority/Task Attribute settings 253 */ 254 #define SNIC_ICMND_TSK_SHIFT 2 /* task attr starts at bit 2 */ 255 #define SNIC_ICMND_TSK_MASK(x) ((x>>SNIC_ICMND_TSK_SHIFT) & ~(0xffff)) 256 #define SNIC_ICMND_TSK_SIMPLE 0 /* simple task attr */ 257 #define SNIC_ICMND_TSK_HEAD_OF_QUEUE 1 /* head of qeuue task attr */ 258 #define SNIC_ICMND_TSK_ORDERED 2 /* ordered task attr */ 259 260 #define SNIC_ICMND_PRI_SHIFT 5 /* prio val starts at bit 5 */ 261 262 /* 263 * snic_icmnd : host-> firmware request 264 * 265 * used for sending out an initiator SCSI 16/32-byte command 266 */ 267 struct snic_icmnd { 268 __le16 sg_cnt; /* Number of SG Elements */ 269 __le16 flags; /* flags */ 270 __le32 sense_len; /* Sense buffer length */ 271 __le64 tgt_id; /* Destination Target ID */ 272 __le64 lun_id; /* Destination LUN ID */ 273 u8 cdb_len; 274 u8 _resvd; 275 __le16 time_out; /* ms time for Res allocations fw to handle io*/ 276 __le32 data_len; /* Total number of bytes to be transferred */ 277 u8 cdb[SNIC_CDB_LEN]; 278 __le64 sg_addr; /* Points to SG List */ 279 __le64 sense_addr; /* Sense buffer address */ 280 }; 281 282 283 /* Response flags */ 284 /* Bit 0: Under run 285 * Bit 1: Over Run 286 * Bit 2-7: Reserved 287 */ 288 #define SNIC_ICMND_CMPL_UNDR_RUN 0x01 /* resid under and valid */ 289 #define SNIC_ICMND_CMPL_OVER_RUN 0x02 /* resid over and valid */ 290 291 /* 292 * snic_icmnd_cmpl: firmware -> host response 293 * 294 * Used for sending the host a response to an icmnd (initiator command) 295 */ 296 struct snic_icmnd_cmpl { 297 u8 scsi_status; /* value as per SAM */ 298 u8 flags; 299 __le16 sense_len; /* Sense Length */ 300 __le32 resid; /* Residue : # bytes under or over run */ 301 }; 302 303 /* 304 * snic_itmf: host->firmware request 305 * 306 * used for requesting the firmware to abort a request and/or send out 307 * a task management function 308 * 309 * the req_id field is valid in case of abort task and clear task 310 */ 311 struct snic_itmf { 312 u8 tm_type; /* SCSI Task Management request */ 313 u8 resvd; 314 __le16 flags; /* flags */ 315 __le32 req_id; /* Command id of snic req to be aborted */ 316 __le64 tgt_id; /* Target ID */ 317 __le64 lun_id; /* Destination LUN ID */ 318 __le16 timeout; /* in sec */ 319 }; 320 321 /* 322 * Task Management Request 323 */ 324 enum snic_itmf_tm_type { 325 SNIC_ITMF_ABTS_TASK = 0x01, /* Abort Task */ 326 SNIC_ITMF_ABTS_TASK_SET, /* Abort Task Set */ 327 SNIC_ITMF_CLR_TASK, /* Clear Task */ 328 SNIC_ITMF_CLR_TASKSET, /* Clear Task Set */ 329 SNIC_ITMF_LUN_RESET, /* Lun Reset */ 330 SNIC_ITMF_ABTS_TASK_TERM, /* Supported for SAN Targets */ 331 }; 332 333 /* 334 * snic_itmf_cmpl: firmware -> host resposne 335 * 336 * used for sending the host a response for a itmf request 337 */ 338 struct snic_itmf_cmpl { 339 __le32 nterminated; /* # IOs terminated as a result of tmf */ 340 u8 flags; /* flags */ 341 u8 _resvd[3]; 342 }; 343 344 /* 345 * itmfl_cmpl flags 346 * Bit 0 : 1 - Num terminated field valid 347 * Bit 1 - 7 : Reserved 348 */ 349 #define SNIC_NUM_TERM_VALID 0x01 /* Number of IOs terminated */ 350 351 /* 352 * snic_hba_reset: host -> firmware request 353 * 354 * used for requesting firmware to reset snic 355 */ 356 struct snic_hba_reset { 357 __le16 flags; /* flags */ 358 u8 _resvd[6]; 359 }; 360 361 /* 362 * snic_hba_reset_cmpl: firmware -> host response 363 * 364 * Used by firmware to respond to the host's hba reset request 365 */ 366 struct snic_hba_reset_cmpl { 367 u8 flags; /* flags : more info needs to be added*/ 368 u8 _resvd[7]; 369 }; 370 371 /* 372 * snic_notify_msg: firmware -> host response 373 * 374 * Used by firmware to notify host of the last work queue entry received 375 */ 376 struct snic_notify_msg { 377 __le32 wqe_num; /* wq entry number */ 378 u8 flags; /* flags, macros */ 379 u8 _resvd[4]; 380 }; 381 382 383 #define SNIC_EVDATA_LEN 24 /* in bytes */ 384 /* snic_async_evnotify: firmware -> host notification 385 * 386 * Used by firmware to notify the host about configuration/state changes 387 */ 388 struct snic_async_evnotify { 389 u8 FLS_EVENT_DESC; 390 u8 vnic; /* vnic id */ 391 u8 _resvd[2]; 392 __le32 ev_id; /* Event ID */ 393 u8 ev_data[SNIC_EVDATA_LEN]; /* Event Data */ 394 u8 _resvd2[4]; 395 }; 396 397 /* async event flags */ 398 enum snic_ev_type { 399 SNIC_EV_TGT_OFFLINE = 0x01, /* Target Offline, PL contains TGT ID */ 400 SNIC_EV_TGT_ONLINE, /* Target Online, PL contains TGT ID */ 401 SNIC_EV_LUN_OFFLINE, /* LUN Offline, PL contains LUN ID */ 402 SNIC_EV_LUN_ONLINE, /* LUN Online, PL contains LUN ID */ 403 SNIC_EV_CONF_CHG, /* Dev Config/Attr Change Event */ 404 SNIC_EV_TGT_ADDED, /* Target Added */ 405 SNIC_EV_TGT_DELTD, /* Target Del'd, PL contains TGT ID */ 406 SNIC_EV_LUN_ADDED, /* LUN Added */ 407 SNIC_EV_LUN_DELTD, /* LUN Del'd, PL cont. TGT & LUN ID */ 408 409 SNIC_EV_DISC_CMPL = 0x10, /* Discovery Completed Event */ 410 }; 411 412 413 #define SNIC_HOST_REQ_LEN 128 /*Exp length of host req, wq desc sz*/ 414 /* Payload 88 bytes = 128 - 24 - 16 */ 415 #define SNIC_HOST_REQ_PAYLOAD ((int)(SNIC_HOST_REQ_LEN - \ 416 sizeof(struct snic_io_hdr) - \ 417 (2 * sizeof(u64)) - sizeof(ulong))) 418 419 /* 420 * snic_host_req: host -> firmware request 421 * 422 * Basic structure for all snic requests that are sent from the host to 423 * firmware. They are 128 bytes in size. 424 */ 425 struct snic_host_req { 426 u64 ctrl_data[2]; /*16 bytes - Control Data */ 427 struct snic_io_hdr hdr; 428 union { 429 /* 430 * Entry specific space, last byte contains color 431 */ 432 u8 buf[SNIC_HOST_REQ_PAYLOAD]; 433 434 /* 435 * Exchange firmware version 436 */ 437 struct snic_exch_ver_req exch_ver; 438 439 /* report targets */ 440 struct snic_report_tgts rpt_tgts; 441 442 /* io request */ 443 struct snic_icmnd icmnd; 444 445 /* task management request */ 446 struct snic_itmf itmf; 447 448 /* hba reset */ 449 struct snic_hba_reset reset; 450 } u; 451 452 ulong req_pa; 453 }; /* end of snic_host_req structure */ 454 455 456 #define SNIC_FW_REQ_LEN 64 /* Expected length of fw req */ 457 struct snic_fw_req { 458 struct snic_io_hdr hdr; 459 union { 460 /* 461 * Entry specific space, last byte contains color 462 */ 463 u8 buf[SNIC_FW_REQ_LEN - sizeof(struct snic_io_hdr)]; 464 465 /* Exchange Version Response */ 466 struct snic_exch_ver_rsp exch_ver_cmpl; 467 468 /* Report Targets Response */ 469 struct snic_report_tgts_cmpl rpt_tgts_cmpl; 470 471 /* scsi response */ 472 struct snic_icmnd_cmpl icmnd_cmpl; 473 474 /* task management response */ 475 struct snic_itmf_cmpl itmf_cmpl; 476 477 /* hba reset response */ 478 struct snic_hba_reset_cmpl reset_cmpl; 479 480 /* notify message */ 481 struct snic_notify_msg ack; 482 483 /* async notification event */ 484 struct snic_async_evnotify async_ev; 485 486 } u; 487 }; /* end of snic_fw_req structure */ 488 489 /* 490 * Auxillary macro to verify specific snic req/cmpl structures 491 * to ensure that it will be aligned to 64 bit, and not using 492 * color bit field 493 */ 494 #define VERIFY_REQ_SZ(x) 495 #define VERIFY_CMPL_SZ(x) 496 497 /* 498 * Access routines to encode and decode the color bit, which is the most 499 * significant bit of the structure. 500 */ 501 static inline void 502 snic_color_enc(struct snic_fw_req *req, u8 color) 503 { 504 u8 *c = ((u8 *) req) + sizeof(struct snic_fw_req) - 1; 505 506 if (color) 507 *c |= 0x80; 508 else 509 *c &= ~0x80; 510 } 511 512 static inline void 513 snic_color_dec(struct snic_fw_req *req, u8 *color) 514 { 515 u8 *c = ((u8 *) req) + sizeof(struct snic_fw_req) - 1; 516 517 *color = *c >> 7; 518 519 /* Make sure color bit is read from desc *before* other fields 520 * are read from desc. Hardware guarantees color bit is last 521 * bit (byte) written. Adding the rmb() prevents the compiler 522 * and/or CPU from reordering the reads which would potentially 523 * result in reading stale values. 524 */ 525 rmb(); 526 } 527 #endif /* end of __SNIC_FWINT_H */ 528