1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  *    driver for Microchip PQI-based storage controllers
4  *    Copyright (c) 2019-2022 Microchip Technology Inc. and its subsidiaries
5  *    Copyright (c) 2016-2018 Microsemi Corporation
6  *    Copyright (c) 2016 PMC-Sierra, Inc.
7  *
8  *    Questions/Comments/Bugfixes to storagedev@microchip.com
9  *
10  */
11 
12 #include <linux/module.h>
13 #include <linux/kernel.h>
14 #include <linux/delay.h>
15 #include <linux/pci.h>
16 #include <scsi/scsi_device.h>
17 #include <asm/unaligned.h>
18 #include "smartpqi.h"
19 #include "smartpqi_sis.h"
20 
21 /* legacy SIS interface commands */
22 #define SIS_CMD_GET_ADAPTER_PROPERTIES		0x19
23 #define SIS_CMD_INIT_BASE_STRUCT_ADDRESS	0x1b
24 #define SIS_CMD_GET_PQI_CAPABILITIES		0x3000
25 
26 /* for submission of legacy SIS commands */
27 #define SIS_REENABLE_SIS_MODE			0x1
28 #define SIS_ENABLE_MSIX				0x40
29 #define SIS_ENABLE_INTX				0x80
30 #define SIS_SOFT_RESET				0x100
31 #define SIS_CMD_READY				0x200
32 #define SIS_TRIGGER_SHUTDOWN			0x800000
33 #define SIS_PQI_RESET_QUIESCE			0x1000000
34 
35 #define SIS_CMD_COMPLETE			0x1000
36 #define SIS_CLEAR_CTRL_TO_HOST_DOORBELL		0x1000
37 
38 #define SIS_CMD_STATUS_SUCCESS			0x1
39 #define SIS_CMD_COMPLETE_TIMEOUT_SECS		30
40 #define SIS_CMD_COMPLETE_POLL_INTERVAL_MSECS	10
41 
42 /* used with SIS_CMD_GET_ADAPTER_PROPERTIES command */
43 #define SIS_EXTENDED_PROPERTIES_SUPPORTED	0x800000
44 #define SIS_SMARTARRAY_FEATURES_SUPPORTED	0x2
45 #define SIS_PQI_MODE_SUPPORTED			0x4
46 #define SIS_PQI_RESET_QUIESCE_SUPPORTED		0x8
47 #define SIS_REQUIRED_EXTENDED_PROPERTIES	\
48 	(SIS_SMARTARRAY_FEATURES_SUPPORTED | SIS_PQI_MODE_SUPPORTED)
49 
50 /* used with SIS_CMD_INIT_BASE_STRUCT_ADDRESS command */
51 #define SIS_BASE_STRUCT_REVISION		9
52 #define SIS_BASE_STRUCT_ALIGNMENT		16
53 
54 #define SIS_CTRL_KERNEL_FW_TRIAGE		0x3
55 #define SIS_CTRL_KERNEL_UP			0x80
56 #define SIS_CTRL_KERNEL_PANIC			0x100
57 #define SIS_CTRL_READY_TIMEOUT_SECS		180
58 #define SIS_CTRL_READY_RESUME_TIMEOUT_SECS	90
59 #define SIS_CTRL_READY_POLL_INTERVAL_MSECS	10
60 
61 enum sis_fw_triage_status {
62 	FW_TRIAGE_NOT_STARTED = 0,
63 	FW_TRIAGE_STARTED,
64 	FW_TRIAGE_COND_INVALID,
65 	FW_TRIAGE_COMPLETED
66 };
67 
68 #pragma pack(1)
69 
70 /* for use with SIS_CMD_INIT_BASE_STRUCT_ADDRESS command */
71 struct sis_base_struct {
72 	__le32	revision;		/* revision of this structure */
73 	__le32	flags;			/* reserved */
74 	__le32	error_buffer_paddr_low;	/* lower 32 bits of physical memory */
75 					/* buffer for PQI error response */
76 					/* data */
77 	__le32	error_buffer_paddr_high;	/* upper 32 bits of physical */
78 						/* memory buffer for PQI */
79 						/* error response data */
80 	__le32	error_buffer_element_length;	/* length of each PQI error */
81 						/* response buffer element */
82 						/* in bytes */
83 	__le32	error_buffer_num_elements;	/* total number of PQI error */
84 						/* response buffers available */
85 };
86 
87 #pragma pack()
88 
89 unsigned int sis_ctrl_ready_timeout_secs = SIS_CTRL_READY_TIMEOUT_SECS;
90 
91 static int sis_wait_for_ctrl_ready_with_timeout(struct pqi_ctrl_info *ctrl_info,
92 	unsigned int timeout_secs)
93 {
94 	unsigned long timeout;
95 	u32 status;
96 
97 	timeout = (timeout_secs * HZ) + jiffies;
98 
99 	while (1) {
100 		status = readl(&ctrl_info->registers->sis_firmware_status);
101 		if (status != ~0) {
102 			if (status & SIS_CTRL_KERNEL_PANIC) {
103 				dev_err(&ctrl_info->pci_dev->dev,
104 					"controller is offline: status code 0x%x\n",
105 					readl(
106 					&ctrl_info->registers->sis_mailbox[7]));
107 				return -ENODEV;
108 			}
109 			if (status & SIS_CTRL_KERNEL_UP)
110 				break;
111 		}
112 		if (time_after(jiffies, timeout)) {
113 			dev_err(&ctrl_info->pci_dev->dev,
114 				"controller not ready after %u seconds\n",
115 				timeout_secs);
116 			return -ETIMEDOUT;
117 		}
118 		msleep(SIS_CTRL_READY_POLL_INTERVAL_MSECS);
119 	}
120 
121 	return 0;
122 }
123 
124 int sis_wait_for_ctrl_ready(struct pqi_ctrl_info *ctrl_info)
125 {
126 	return sis_wait_for_ctrl_ready_with_timeout(ctrl_info,
127 		sis_ctrl_ready_timeout_secs);
128 }
129 
130 int sis_wait_for_ctrl_ready_resume(struct pqi_ctrl_info *ctrl_info)
131 {
132 	return sis_wait_for_ctrl_ready_with_timeout(ctrl_info,
133 		SIS_CTRL_READY_RESUME_TIMEOUT_SECS);
134 }
135 
136 bool sis_is_firmware_running(struct pqi_ctrl_info *ctrl_info)
137 {
138 	bool running;
139 	u32 status;
140 
141 	status = readl(&ctrl_info->registers->sis_firmware_status);
142 
143 	if (status != ~0 && (status & SIS_CTRL_KERNEL_PANIC))
144 		running = false;
145 	else
146 		running = true;
147 
148 	if (!running)
149 		dev_err(&ctrl_info->pci_dev->dev,
150 			"controller is offline: status code 0x%x\n",
151 			readl(&ctrl_info->registers->sis_mailbox[7]));
152 
153 	return running;
154 }
155 
156 bool sis_is_kernel_up(struct pqi_ctrl_info *ctrl_info)
157 {
158 	return readl(&ctrl_info->registers->sis_firmware_status) &
159 		SIS_CTRL_KERNEL_UP;
160 }
161 
162 u32 sis_get_product_id(struct pqi_ctrl_info *ctrl_info)
163 {
164 	return readl(&ctrl_info->registers->sis_product_identifier);
165 }
166 
167 /* used for passing command parameters/results when issuing SIS commands */
168 struct sis_sync_cmd_params {
169 	u32	mailbox[6];	/* mailboxes 0-5 */
170 };
171 
172 static int sis_send_sync_cmd(struct pqi_ctrl_info *ctrl_info,
173 	u32 cmd, struct sis_sync_cmd_params *params)
174 {
175 	struct pqi_ctrl_registers __iomem *registers;
176 	unsigned int i;
177 	unsigned long timeout;
178 	u32 doorbell;
179 	u32 cmd_status;
180 
181 	registers = ctrl_info->registers;
182 
183 	/* Write the command to mailbox 0. */
184 	writel(cmd, &registers->sis_mailbox[0]);
185 
186 	/*
187 	 * Write the command parameters to mailboxes 1-4 (mailbox 5 is not used
188 	 * when sending a command to the controller).
189 	 */
190 	for (i = 1; i <= 4; i++)
191 		writel(params->mailbox[i], &registers->sis_mailbox[i]);
192 
193 	/* Clear the command doorbell. */
194 	writel(SIS_CLEAR_CTRL_TO_HOST_DOORBELL,
195 		&registers->sis_ctrl_to_host_doorbell_clear);
196 
197 	/* Disable doorbell interrupts by masking all interrupts. */
198 	writel(~0, &registers->sis_interrupt_mask);
199 	usleep_range(1000, 2000);
200 
201 	/*
202 	 * Force the completion of the interrupt mask register write before
203 	 * submitting the command.
204 	 */
205 	readl(&registers->sis_interrupt_mask);
206 
207 	/* Submit the command to the controller. */
208 	writel(SIS_CMD_READY, &registers->sis_host_to_ctrl_doorbell);
209 
210 	/*
211 	 * Poll for command completion.  Note that the call to msleep() is at
212 	 * the top of the loop in order to give the controller time to start
213 	 * processing the command before we start polling.
214 	 */
215 	timeout = (SIS_CMD_COMPLETE_TIMEOUT_SECS * HZ) + jiffies;
216 	while (1) {
217 		msleep(SIS_CMD_COMPLETE_POLL_INTERVAL_MSECS);
218 		doorbell = readl(&registers->sis_ctrl_to_host_doorbell);
219 		if (doorbell & SIS_CMD_COMPLETE)
220 			break;
221 		if (time_after(jiffies, timeout))
222 			return -ETIMEDOUT;
223 	}
224 
225 	/* Read the command status from mailbox 0. */
226 	cmd_status = readl(&registers->sis_mailbox[0]);
227 	if (cmd_status != SIS_CMD_STATUS_SUCCESS) {
228 		dev_err(&ctrl_info->pci_dev->dev,
229 			"SIS command failed for command 0x%x: status = 0x%x\n",
230 			cmd, cmd_status);
231 		return -EINVAL;
232 	}
233 
234 	/*
235 	 * The command completed successfully, so save the command status and
236 	 * read the values returned in mailboxes 1-5.
237 	 */
238 	params->mailbox[0] = cmd_status;
239 	for (i = 1; i < ARRAY_SIZE(params->mailbox); i++)
240 		params->mailbox[i] = readl(&registers->sis_mailbox[i]);
241 
242 	return 0;
243 }
244 
245 /*
246  * This function verifies that we are talking to a controller that speaks PQI.
247  */
248 
249 int sis_get_ctrl_properties(struct pqi_ctrl_info *ctrl_info)
250 {
251 	int rc;
252 	u32 properties;
253 	u32 extended_properties;
254 	struct sis_sync_cmd_params params;
255 
256 	memset(&params, 0, sizeof(params));
257 
258 	rc = sis_send_sync_cmd(ctrl_info, SIS_CMD_GET_ADAPTER_PROPERTIES,
259 		&params);
260 	if (rc)
261 		return rc;
262 
263 	properties = params.mailbox[1];
264 
265 	if (!(properties & SIS_EXTENDED_PROPERTIES_SUPPORTED))
266 		return -ENODEV;
267 
268 	extended_properties = params.mailbox[4];
269 
270 	if ((extended_properties & SIS_REQUIRED_EXTENDED_PROPERTIES) !=
271 		SIS_REQUIRED_EXTENDED_PROPERTIES)
272 		return -ENODEV;
273 
274 	if (extended_properties & SIS_PQI_RESET_QUIESCE_SUPPORTED)
275 		ctrl_info->pqi_reset_quiesce_supported = true;
276 
277 	return 0;
278 }
279 
280 int sis_get_pqi_capabilities(struct pqi_ctrl_info *ctrl_info)
281 {
282 	int rc;
283 	struct sis_sync_cmd_params params;
284 
285 	memset(&params, 0, sizeof(params));
286 
287 	rc = sis_send_sync_cmd(ctrl_info, SIS_CMD_GET_PQI_CAPABILITIES,
288 		&params);
289 	if (rc)
290 		return rc;
291 
292 	ctrl_info->max_sg_entries = params.mailbox[1];
293 	ctrl_info->max_transfer_size = params.mailbox[2];
294 	ctrl_info->max_outstanding_requests = params.mailbox[3];
295 	ctrl_info->config_table_offset = params.mailbox[4];
296 	ctrl_info->config_table_length = params.mailbox[5];
297 
298 	return 0;
299 }
300 
301 int sis_init_base_struct_addr(struct pqi_ctrl_info *ctrl_info)
302 {
303 	int rc;
304 	void *base_struct_unaligned;
305 	struct sis_base_struct *base_struct;
306 	struct sis_sync_cmd_params params;
307 	unsigned long error_buffer_paddr;
308 	dma_addr_t bus_address;
309 
310 	base_struct_unaligned = kzalloc(sizeof(*base_struct)
311 		+ SIS_BASE_STRUCT_ALIGNMENT - 1, GFP_KERNEL);
312 	if (!base_struct_unaligned)
313 		return -ENOMEM;
314 
315 	base_struct = PTR_ALIGN(base_struct_unaligned,
316 		SIS_BASE_STRUCT_ALIGNMENT);
317 	error_buffer_paddr = (unsigned long)ctrl_info->error_buffer_dma_handle;
318 
319 	put_unaligned_le32(SIS_BASE_STRUCT_REVISION, &base_struct->revision);
320 	put_unaligned_le32(lower_32_bits(error_buffer_paddr),
321 		&base_struct->error_buffer_paddr_low);
322 	put_unaligned_le32(upper_32_bits(error_buffer_paddr),
323 		&base_struct->error_buffer_paddr_high);
324 	put_unaligned_le32(PQI_ERROR_BUFFER_ELEMENT_LENGTH,
325 		&base_struct->error_buffer_element_length);
326 	put_unaligned_le32(ctrl_info->max_io_slots,
327 		&base_struct->error_buffer_num_elements);
328 
329 	bus_address = dma_map_single(&ctrl_info->pci_dev->dev, base_struct,
330 		sizeof(*base_struct), DMA_TO_DEVICE);
331 	if (dma_mapping_error(&ctrl_info->pci_dev->dev, bus_address)) {
332 		rc = -ENOMEM;
333 		goto out;
334 	}
335 
336 	memset(&params, 0, sizeof(params));
337 	params.mailbox[1] = lower_32_bits((u64)bus_address);
338 	params.mailbox[2] = upper_32_bits((u64)bus_address);
339 	params.mailbox[3] = sizeof(*base_struct);
340 
341 	rc = sis_send_sync_cmd(ctrl_info, SIS_CMD_INIT_BASE_STRUCT_ADDRESS,
342 		&params);
343 
344 	dma_unmap_single(&ctrl_info->pci_dev->dev, bus_address,
345 			sizeof(*base_struct), DMA_TO_DEVICE);
346 out:
347 	kfree(base_struct_unaligned);
348 
349 	return rc;
350 }
351 
352 #define SIS_DOORBELL_BIT_CLEAR_TIMEOUT_SECS	30
353 
354 static int sis_wait_for_doorbell_bit_to_clear(
355 	struct pqi_ctrl_info *ctrl_info, u32 bit)
356 {
357 	int rc = 0;
358 	u32 doorbell_register;
359 	unsigned long timeout;
360 
361 	timeout = (SIS_DOORBELL_BIT_CLEAR_TIMEOUT_SECS * HZ) + jiffies;
362 
363 	while (1) {
364 		doorbell_register =
365 			readl(&ctrl_info->registers->sis_host_to_ctrl_doorbell);
366 		if ((doorbell_register & bit) == 0)
367 			break;
368 		if (readl(&ctrl_info->registers->sis_firmware_status) &
369 			SIS_CTRL_KERNEL_PANIC) {
370 			rc = -ENODEV;
371 			break;
372 		}
373 		if (time_after(jiffies, timeout)) {
374 			dev_err(&ctrl_info->pci_dev->dev,
375 				"doorbell register bit 0x%x not cleared\n",
376 				bit);
377 			rc = -ETIMEDOUT;
378 			break;
379 		}
380 		usleep_range(1000, 2000);
381 	}
382 
383 	return rc;
384 }
385 
386 static inline int sis_set_doorbell_bit(struct pqi_ctrl_info *ctrl_info, u32 bit)
387 {
388 	writel(bit, &ctrl_info->registers->sis_host_to_ctrl_doorbell);
389 	usleep_range(1000, 2000);
390 
391 	return sis_wait_for_doorbell_bit_to_clear(ctrl_info, bit);
392 }
393 
394 void sis_enable_msix(struct pqi_ctrl_info *ctrl_info)
395 {
396 	sis_set_doorbell_bit(ctrl_info, SIS_ENABLE_MSIX);
397 }
398 
399 void sis_enable_intx(struct pqi_ctrl_info *ctrl_info)
400 {
401 	sis_set_doorbell_bit(ctrl_info, SIS_ENABLE_INTX);
402 }
403 
404 void sis_shutdown_ctrl(struct pqi_ctrl_info *ctrl_info,
405 	enum pqi_ctrl_shutdown_reason ctrl_shutdown_reason)
406 {
407 	if (readl(&ctrl_info->registers->sis_firmware_status) &
408 		SIS_CTRL_KERNEL_PANIC)
409 		return;
410 
411 	if (ctrl_info->firmware_triage_supported)
412 		writel(ctrl_shutdown_reason, &ctrl_info->registers->sis_ctrl_shutdown_reason_code);
413 
414 	writel(SIS_TRIGGER_SHUTDOWN, &ctrl_info->registers->sis_host_to_ctrl_doorbell);
415 }
416 
417 int sis_pqi_reset_quiesce(struct pqi_ctrl_info *ctrl_info)
418 {
419 	return sis_set_doorbell_bit(ctrl_info, SIS_PQI_RESET_QUIESCE);
420 }
421 
422 int sis_reenable_sis_mode(struct pqi_ctrl_info *ctrl_info)
423 {
424 	return sis_set_doorbell_bit(ctrl_info, SIS_REENABLE_SIS_MODE);
425 }
426 
427 void sis_write_driver_scratch(struct pqi_ctrl_info *ctrl_info, u32 value)
428 {
429 	writel(value, &ctrl_info->registers->sis_driver_scratch);
430 	usleep_range(1000, 2000);
431 }
432 
433 u32 sis_read_driver_scratch(struct pqi_ctrl_info *ctrl_info)
434 {
435 	return readl(&ctrl_info->registers->sis_driver_scratch);
436 }
437 
438 static inline enum sis_fw_triage_status
439 	sis_read_firmware_triage_status(struct pqi_ctrl_info *ctrl_info)
440 {
441 	return ((enum sis_fw_triage_status)(readl(&ctrl_info->registers->sis_firmware_status) &
442 		SIS_CTRL_KERNEL_FW_TRIAGE));
443 }
444 
445 void sis_soft_reset(struct pqi_ctrl_info *ctrl_info)
446 {
447 	writel(SIS_SOFT_RESET,
448 		&ctrl_info->registers->sis_host_to_ctrl_doorbell);
449 }
450 
451 #define SIS_FW_TRIAGE_STATUS_TIMEOUT_SECS		300
452 #define SIS_FW_TRIAGE_STATUS_POLL_INTERVAL_SECS		1
453 
454 int sis_wait_for_fw_triage_completion(struct pqi_ctrl_info *ctrl_info)
455 {
456 	int rc;
457 	enum sis_fw_triage_status status;
458 	unsigned long timeout;
459 
460 	timeout = (SIS_FW_TRIAGE_STATUS_TIMEOUT_SECS * HZ) + jiffies;
461 	while (1) {
462 		status = sis_read_firmware_triage_status(ctrl_info);
463 		if (status == FW_TRIAGE_COND_INVALID) {
464 			dev_err(&ctrl_info->pci_dev->dev,
465 				"firmware triage condition invalid\n");
466 			rc = -EINVAL;
467 			break;
468 		} else if (status == FW_TRIAGE_NOT_STARTED ||
469 			status == FW_TRIAGE_COMPLETED) {
470 			rc = 0;
471 			break;
472 		}
473 
474 		if (time_after(jiffies, timeout)) {
475 			dev_err(&ctrl_info->pci_dev->dev,
476 				"timed out waiting for firmware triage status\n");
477 			rc = -ETIMEDOUT;
478 			break;
479 		}
480 
481 		ssleep(SIS_FW_TRIAGE_STATUS_POLL_INTERVAL_SECS);
482 	}
483 
484 	return rc;
485 }
486 
487 void sis_verify_structures(void)
488 {
489 	BUILD_BUG_ON(offsetof(struct sis_base_struct,
490 		revision) != 0x0);
491 	BUILD_BUG_ON(offsetof(struct sis_base_struct,
492 		flags) != 0x4);
493 	BUILD_BUG_ON(offsetof(struct sis_base_struct,
494 		error_buffer_paddr_low) != 0x8);
495 	BUILD_BUG_ON(offsetof(struct sis_base_struct,
496 		error_buffer_paddr_high) != 0xc);
497 	BUILD_BUG_ON(offsetof(struct sis_base_struct,
498 		error_buffer_element_length) != 0x10);
499 	BUILD_BUG_ON(offsetof(struct sis_base_struct,
500 		error_buffer_num_elements) != 0x14);
501 	BUILD_BUG_ON(sizeof(struct sis_base_struct) != 0x18);
502 }
503