1 /* 2 * SCSI Zoned Block commands 3 * 4 * Copyright (C) 2014-2015 SUSE Linux GmbH 5 * Written by: Hannes Reinecke <hare@suse.de> 6 * Modified by: Damien Le Moal <damien.lemoal@hgst.com> 7 * Modified by: Shaun Tancheff <shaun.tancheff@seagate.com> 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License version 11 * 2 as published by the Free Software Foundation. 12 * 13 * This program is distributed in the hope that it will be useful, but 14 * WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 16 * General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; see the file COPYING. If not, write to 20 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, 21 * USA. 22 * 23 */ 24 25 #include <linux/blkdev.h> 26 27 #include <asm/unaligned.h> 28 29 #include <scsi/scsi.h> 30 #include <scsi/scsi_cmnd.h> 31 32 #include "sd.h" 33 34 /** 35 * sd_zbc_parse_report - Convert a zone descriptor to a struct blk_zone, 36 * @sdkp: The disk the report originated from 37 * @buf: Address of the report zone descriptor 38 * @zone: the destination zone structure 39 * 40 * All LBA sized values are converted to 512B sectors unit. 41 */ 42 static void sd_zbc_parse_report(struct scsi_disk *sdkp, u8 *buf, 43 struct blk_zone *zone) 44 { 45 struct scsi_device *sdp = sdkp->device; 46 47 memset(zone, 0, sizeof(struct blk_zone)); 48 49 zone->type = buf[0] & 0x0f; 50 zone->cond = (buf[1] >> 4) & 0xf; 51 if (buf[1] & 0x01) 52 zone->reset = 1; 53 if (buf[1] & 0x02) 54 zone->non_seq = 1; 55 56 zone->len = logical_to_sectors(sdp, get_unaligned_be64(&buf[8])); 57 zone->start = logical_to_sectors(sdp, get_unaligned_be64(&buf[16])); 58 zone->wp = logical_to_sectors(sdp, get_unaligned_be64(&buf[24])); 59 if (zone->type != ZBC_ZONE_TYPE_CONV && 60 zone->cond == ZBC_ZONE_COND_FULL) 61 zone->wp = zone->start + zone->len; 62 } 63 64 /** 65 * sd_zbc_report_zones - Issue a REPORT ZONES scsi command. 66 * @sdkp: The target disk 67 * @buf: Buffer to use for the reply 68 * @buflen: the buffer size 69 * @lba: Start LBA of the report 70 * 71 * For internal use during device validation. 72 */ 73 static int sd_zbc_report_zones(struct scsi_disk *sdkp, unsigned char *buf, 74 unsigned int buflen, sector_t lba) 75 { 76 struct scsi_device *sdp = sdkp->device; 77 const int timeout = sdp->request_queue->rq_timeout; 78 struct scsi_sense_hdr sshdr; 79 unsigned char cmd[16]; 80 unsigned int rep_len; 81 int result; 82 83 memset(cmd, 0, 16); 84 cmd[0] = ZBC_IN; 85 cmd[1] = ZI_REPORT_ZONES; 86 put_unaligned_be64(lba, &cmd[2]); 87 put_unaligned_be32(buflen, &cmd[10]); 88 memset(buf, 0, buflen); 89 90 result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE, 91 buf, buflen, &sshdr, 92 timeout, SD_MAX_RETRIES, NULL); 93 if (result) { 94 sd_printk(KERN_ERR, sdkp, 95 "REPORT ZONES lba %llu failed with %d/%d\n", 96 (unsigned long long)lba, 97 host_byte(result), driver_byte(result)); 98 return -EIO; 99 } 100 101 rep_len = get_unaligned_be32(&buf[0]); 102 if (rep_len < 64) { 103 sd_printk(KERN_ERR, sdkp, 104 "REPORT ZONES report invalid length %u\n", 105 rep_len); 106 return -EIO; 107 } 108 109 return 0; 110 } 111 112 /** 113 * sd_zbc_setup_report_cmnd - Prepare a REPORT ZONES scsi command 114 * @cmd: The command to setup 115 * 116 * Call in sd_init_command() for a REQ_OP_ZONE_REPORT request. 117 */ 118 int sd_zbc_setup_report_cmnd(struct scsi_cmnd *cmd) 119 { 120 struct request *rq = cmd->request; 121 struct scsi_disk *sdkp = scsi_disk(rq->rq_disk); 122 sector_t lba, sector = blk_rq_pos(rq); 123 unsigned int nr_bytes = blk_rq_bytes(rq); 124 int ret; 125 126 WARN_ON(nr_bytes == 0); 127 128 if (!sd_is_zoned(sdkp)) 129 /* Not a zoned device */ 130 return BLKPREP_KILL; 131 132 ret = scsi_init_io(cmd); 133 if (ret != BLKPREP_OK) 134 return ret; 135 136 cmd->cmd_len = 16; 137 memset(cmd->cmnd, 0, cmd->cmd_len); 138 cmd->cmnd[0] = ZBC_IN; 139 cmd->cmnd[1] = ZI_REPORT_ZONES; 140 lba = sectors_to_logical(sdkp->device, sector); 141 put_unaligned_be64(lba, &cmd->cmnd[2]); 142 put_unaligned_be32(nr_bytes, &cmd->cmnd[10]); 143 /* Do partial report for speeding things up */ 144 cmd->cmnd[14] = ZBC_REPORT_ZONE_PARTIAL; 145 146 cmd->sc_data_direction = DMA_FROM_DEVICE; 147 cmd->sdb.length = nr_bytes; 148 cmd->transfersize = sdkp->device->sector_size; 149 cmd->allowed = 0; 150 151 /* 152 * Report may return less bytes than requested. Make sure 153 * to report completion on the entire initial request. 154 */ 155 rq->__data_len = nr_bytes; 156 157 return BLKPREP_OK; 158 } 159 160 /** 161 * sd_zbc_report_zones_complete - Process a REPORT ZONES scsi command reply. 162 * @scmd: The completed report zones command 163 * @good_bytes: reply size in bytes 164 * 165 * Convert all reported zone descriptors to struct blk_zone. The conversion 166 * is done in-place, directly in the request specified sg buffer. 167 */ 168 static void sd_zbc_report_zones_complete(struct scsi_cmnd *scmd, 169 unsigned int good_bytes) 170 { 171 struct request *rq = scmd->request; 172 struct scsi_disk *sdkp = scsi_disk(rq->rq_disk); 173 struct sg_mapping_iter miter; 174 struct blk_zone_report_hdr hdr; 175 struct blk_zone zone; 176 unsigned int offset, bytes = 0; 177 unsigned long flags; 178 u8 *buf; 179 180 if (good_bytes < 64) 181 return; 182 183 memset(&hdr, 0, sizeof(struct blk_zone_report_hdr)); 184 185 sg_miter_start(&miter, scsi_sglist(scmd), scsi_sg_count(scmd), 186 SG_MITER_TO_SG | SG_MITER_ATOMIC); 187 188 local_irq_save(flags); 189 while (sg_miter_next(&miter) && bytes < good_bytes) { 190 191 buf = miter.addr; 192 offset = 0; 193 194 if (bytes == 0) { 195 /* Set the report header */ 196 hdr.nr_zones = min_t(unsigned int, 197 (good_bytes - 64) / 64, 198 get_unaligned_be32(&buf[0]) / 64); 199 memcpy(buf, &hdr, sizeof(struct blk_zone_report_hdr)); 200 offset += 64; 201 bytes += 64; 202 } 203 204 /* Parse zone descriptors */ 205 while (offset < miter.length && hdr.nr_zones) { 206 WARN_ON(offset > miter.length); 207 buf = miter.addr + offset; 208 sd_zbc_parse_report(sdkp, buf, &zone); 209 memcpy(buf, &zone, sizeof(struct blk_zone)); 210 offset += 64; 211 bytes += 64; 212 hdr.nr_zones--; 213 } 214 215 if (!hdr.nr_zones) 216 break; 217 218 } 219 sg_miter_stop(&miter); 220 local_irq_restore(flags); 221 } 222 223 /** 224 * sd_zbc_zone_sectors - Get the device zone size in number of 512B sectors. 225 * @sdkp: The target disk 226 */ 227 static inline sector_t sd_zbc_zone_sectors(struct scsi_disk *sdkp) 228 { 229 return logical_to_sectors(sdkp->device, sdkp->zone_blocks); 230 } 231 232 /** 233 * sd_zbc_setup_reset_cmnd - Prepare a RESET WRITE POINTER scsi command. 234 * @cmd: the command to setup 235 * 236 * Called from sd_init_command() for a REQ_OP_ZONE_RESET request. 237 */ 238 int sd_zbc_setup_reset_cmnd(struct scsi_cmnd *cmd) 239 { 240 struct request *rq = cmd->request; 241 struct scsi_disk *sdkp = scsi_disk(rq->rq_disk); 242 sector_t sector = blk_rq_pos(rq); 243 sector_t block = sectors_to_logical(sdkp->device, sector); 244 245 if (!sd_is_zoned(sdkp)) 246 /* Not a zoned device */ 247 return BLKPREP_KILL; 248 249 if (sdkp->device->changed) 250 return BLKPREP_KILL; 251 252 if (sector & (sd_zbc_zone_sectors(sdkp) - 1)) 253 /* Unaligned request */ 254 return BLKPREP_KILL; 255 256 cmd->cmd_len = 16; 257 memset(cmd->cmnd, 0, cmd->cmd_len); 258 cmd->cmnd[0] = ZBC_OUT; 259 cmd->cmnd[1] = ZO_RESET_WRITE_POINTER; 260 put_unaligned_be64(block, &cmd->cmnd[2]); 261 262 rq->timeout = SD_TIMEOUT; 263 cmd->sc_data_direction = DMA_NONE; 264 cmd->transfersize = 0; 265 cmd->allowed = 0; 266 267 return BLKPREP_OK; 268 } 269 270 /** 271 * sd_zbc_complete - ZBC command post processing. 272 * @cmd: Completed command 273 * @good_bytes: Command reply bytes 274 * @sshdr: command sense header 275 * 276 * Called from sd_done(). Process report zones reply and handle reset zone 277 * and write commands errors. 278 */ 279 void sd_zbc_complete(struct scsi_cmnd *cmd, unsigned int good_bytes, 280 struct scsi_sense_hdr *sshdr) 281 { 282 int result = cmd->result; 283 struct request *rq = cmd->request; 284 285 switch (req_op(rq)) { 286 case REQ_OP_ZONE_RESET: 287 288 if (result && 289 sshdr->sense_key == ILLEGAL_REQUEST && 290 sshdr->asc == 0x24) 291 /* 292 * INVALID FIELD IN CDB error: reset of a conventional 293 * zone was attempted. Nothing to worry about, so be 294 * quiet about the error. 295 */ 296 rq->rq_flags |= RQF_QUIET; 297 break; 298 299 case REQ_OP_WRITE: 300 case REQ_OP_WRITE_ZEROES: 301 case REQ_OP_WRITE_SAME: 302 break; 303 304 case REQ_OP_ZONE_REPORT: 305 306 if (!result) 307 sd_zbc_report_zones_complete(cmd, good_bytes); 308 break; 309 310 } 311 } 312 313 /** 314 * sd_zbc_read_zoned_characteristics - Read zoned block device characteristics 315 * @sdkp: Target disk 316 * @buf: Buffer where to store the VPD page data 317 * 318 * Read VPD page B6. 319 */ 320 static int sd_zbc_read_zoned_characteristics(struct scsi_disk *sdkp, 321 unsigned char *buf) 322 { 323 324 if (scsi_get_vpd_page(sdkp->device, 0xb6, buf, 64)) { 325 sd_printk(KERN_NOTICE, sdkp, 326 "Unconstrained-read check failed\n"); 327 return -ENODEV; 328 } 329 330 if (sdkp->device->type != TYPE_ZBC) { 331 /* Host-aware */ 332 sdkp->urswrz = 1; 333 sdkp->zones_optimal_open = get_unaligned_be32(&buf[8]); 334 sdkp->zones_optimal_nonseq = get_unaligned_be32(&buf[12]); 335 sdkp->zones_max_open = 0; 336 } else { 337 /* Host-managed */ 338 sdkp->urswrz = buf[4] & 1; 339 sdkp->zones_optimal_open = 0; 340 sdkp->zones_optimal_nonseq = 0; 341 sdkp->zones_max_open = get_unaligned_be32(&buf[16]); 342 } 343 344 return 0; 345 } 346 347 /** 348 * sd_zbc_check_capacity - Check reported capacity. 349 * @sdkp: Target disk 350 * @buf: Buffer to use for commands 351 * 352 * ZBC drive may report only the capacity of the first conventional zones at 353 * LBA 0. This is indicated by the RC_BASIS field of the read capacity reply. 354 * Check this here. If the disk reported only its conventional zones capacity, 355 * get the total capacity by doing a report zones. 356 */ 357 static int sd_zbc_check_capacity(struct scsi_disk *sdkp, unsigned char *buf) 358 { 359 sector_t lba; 360 int ret; 361 362 if (sdkp->rc_basis != 0) 363 return 0; 364 365 /* Do a report zone to get the maximum LBA to check capacity */ 366 ret = sd_zbc_report_zones(sdkp, buf, SD_BUF_SIZE, 0); 367 if (ret) 368 return ret; 369 370 /* The max_lba field is the capacity of this device */ 371 lba = get_unaligned_be64(&buf[8]); 372 if (lba + 1 == sdkp->capacity) 373 return 0; 374 375 if (sdkp->first_scan) 376 sd_printk(KERN_WARNING, sdkp, 377 "Changing capacity from %llu to max LBA+1 %llu\n", 378 (unsigned long long)sdkp->capacity, 379 (unsigned long long)lba + 1); 380 sdkp->capacity = lba + 1; 381 382 return 0; 383 } 384 385 #define SD_ZBC_BUF_SIZE 131072U 386 387 /** 388 * sd_zbc_check_zone_size - Check the device zone sizes 389 * @sdkp: Target disk 390 * 391 * Check that all zones of the device are equal. The last zone can however 392 * be smaller. The zone size must also be a power of two number of LBAs. 393 * 394 * Returns the zone size in bytes upon success or an error code upon failure. 395 */ 396 static s64 sd_zbc_check_zone_size(struct scsi_disk *sdkp) 397 { 398 u64 zone_blocks = 0; 399 sector_t block = 0; 400 unsigned char *buf; 401 unsigned char *rec; 402 unsigned int buf_len; 403 unsigned int list_length; 404 int ret; 405 u8 same; 406 407 /* Get a buffer */ 408 buf = kmalloc(SD_ZBC_BUF_SIZE, GFP_KERNEL); 409 if (!buf) 410 return -ENOMEM; 411 412 /* Do a report zone to get the same field */ 413 ret = sd_zbc_report_zones(sdkp, buf, SD_ZBC_BUF_SIZE, 0); 414 if (ret) 415 goto out_free; 416 417 same = buf[4] & 0x0f; 418 if (same > 0) { 419 rec = &buf[64]; 420 zone_blocks = get_unaligned_be64(&rec[8]); 421 goto out; 422 } 423 424 /* 425 * Check the size of all zones: all zones must be of 426 * equal size, except the last zone which can be smaller 427 * than other zones. 428 */ 429 do { 430 431 /* Parse REPORT ZONES header */ 432 list_length = get_unaligned_be32(&buf[0]) + 64; 433 rec = buf + 64; 434 buf_len = min(list_length, SD_ZBC_BUF_SIZE); 435 436 /* Parse zone descriptors */ 437 while (rec < buf + buf_len) { 438 u64 this_zone_blocks = get_unaligned_be64(&rec[8]); 439 440 if (zone_blocks == 0) { 441 zone_blocks = this_zone_blocks; 442 } else if (this_zone_blocks != zone_blocks && 443 (block + this_zone_blocks < sdkp->capacity 444 || this_zone_blocks > zone_blocks)) { 445 zone_blocks = 0; 446 goto out; 447 } 448 block += this_zone_blocks; 449 rec += 64; 450 } 451 452 if (block < sdkp->capacity) { 453 ret = sd_zbc_report_zones(sdkp, buf, 454 SD_ZBC_BUF_SIZE, block); 455 if (ret) 456 goto out_free; 457 } 458 459 } while (block < sdkp->capacity); 460 461 out: 462 if (!zone_blocks) { 463 if (sdkp->first_scan) 464 sd_printk(KERN_NOTICE, sdkp, 465 "Devices with non constant zone " 466 "size are not supported\n"); 467 ret = -ENODEV; 468 } else if (!is_power_of_2(zone_blocks)) { 469 if (sdkp->first_scan) 470 sd_printk(KERN_NOTICE, sdkp, 471 "Devices with non power of 2 zone " 472 "size are not supported\n"); 473 ret = -ENODEV; 474 } else if (logical_to_sectors(sdkp->device, zone_blocks) > UINT_MAX) { 475 if (sdkp->first_scan) 476 sd_printk(KERN_NOTICE, sdkp, 477 "Zone size too large\n"); 478 ret = -ENODEV; 479 } else { 480 ret = zone_blocks; 481 } 482 483 out_free: 484 kfree(buf); 485 486 return ret; 487 } 488 489 /** 490 * sd_zbc_alloc_zone_bitmap - Allocate a zone bitmap (one bit per zone). 491 * @nr_zones: Number of zones to allocate space for. 492 * @numa_node: NUMA node to allocate the memory from. 493 */ 494 static inline unsigned long * 495 sd_zbc_alloc_zone_bitmap(u32 nr_zones, int numa_node) 496 { 497 return kcalloc_node(BITS_TO_LONGS(nr_zones), sizeof(unsigned long), 498 GFP_KERNEL, numa_node); 499 } 500 501 /** 502 * sd_zbc_get_seq_zones - Parse report zones reply to identify sequential zones 503 * @sdkp: disk used 504 * @buf: report reply buffer 505 * @buflen: length of @buf 506 * @zone_shift: logarithm base 2 of the number of blocks in a zone 507 * @seq_zones_bitmap: bitmap of sequential zones to set 508 * 509 * Parse reported zone descriptors in @buf to identify sequential zones and 510 * set the reported zone bit in @seq_zones_bitmap accordingly. 511 * Since read-only and offline zones cannot be written, do not 512 * mark them as sequential in the bitmap. 513 * Return the LBA after the last zone reported. 514 */ 515 static sector_t sd_zbc_get_seq_zones(struct scsi_disk *sdkp, unsigned char *buf, 516 unsigned int buflen, u32 zone_shift, 517 unsigned long *seq_zones_bitmap) 518 { 519 sector_t lba, next_lba = sdkp->capacity; 520 unsigned int buf_len, list_length; 521 unsigned char *rec; 522 u8 type, cond; 523 524 list_length = get_unaligned_be32(&buf[0]) + 64; 525 buf_len = min(list_length, buflen); 526 rec = buf + 64; 527 528 while (rec < buf + buf_len) { 529 type = rec[0] & 0x0f; 530 cond = (rec[1] >> 4) & 0xf; 531 lba = get_unaligned_be64(&rec[16]); 532 if (type != ZBC_ZONE_TYPE_CONV && 533 cond != ZBC_ZONE_COND_READONLY && 534 cond != ZBC_ZONE_COND_OFFLINE) 535 set_bit(lba >> zone_shift, seq_zones_bitmap); 536 next_lba = lba + get_unaligned_be64(&rec[8]); 537 rec += 64; 538 } 539 540 return next_lba; 541 } 542 543 /** 544 * sd_zbc_setup_seq_zones_bitmap - Initialize a seq zone bitmap. 545 * @sdkp: target disk 546 * @zone_shift: logarithm base 2 of the number of blocks in a zone 547 * @nr_zones: number of zones to set up a seq zone bitmap for 548 * 549 * Allocate a zone bitmap and initialize it by identifying sequential zones. 550 */ 551 static unsigned long * 552 sd_zbc_setup_seq_zones_bitmap(struct scsi_disk *sdkp, u32 zone_shift, 553 u32 nr_zones) 554 { 555 struct request_queue *q = sdkp->disk->queue; 556 unsigned long *seq_zones_bitmap; 557 sector_t lba = 0; 558 unsigned char *buf; 559 int ret = -ENOMEM; 560 561 seq_zones_bitmap = sd_zbc_alloc_zone_bitmap(nr_zones, q->node); 562 if (!seq_zones_bitmap) 563 return ERR_PTR(-ENOMEM); 564 565 buf = kmalloc(SD_ZBC_BUF_SIZE, GFP_KERNEL); 566 if (!buf) 567 goto out; 568 569 while (lba < sdkp->capacity) { 570 ret = sd_zbc_report_zones(sdkp, buf, SD_ZBC_BUF_SIZE, lba); 571 if (ret) 572 goto out; 573 lba = sd_zbc_get_seq_zones(sdkp, buf, SD_ZBC_BUF_SIZE, 574 zone_shift, seq_zones_bitmap); 575 } 576 577 if (lba != sdkp->capacity) { 578 /* Something went wrong */ 579 ret = -EIO; 580 } 581 582 out: 583 kfree(buf); 584 if (ret) { 585 kfree(seq_zones_bitmap); 586 return ERR_PTR(ret); 587 } 588 return seq_zones_bitmap; 589 } 590 591 static void sd_zbc_cleanup(struct scsi_disk *sdkp) 592 { 593 struct request_queue *q = sdkp->disk->queue; 594 595 kfree(q->seq_zones_bitmap); 596 q->seq_zones_bitmap = NULL; 597 598 kfree(q->seq_zones_wlock); 599 q->seq_zones_wlock = NULL; 600 601 q->nr_zones = 0; 602 } 603 604 static int sd_zbc_setup(struct scsi_disk *sdkp, u32 zone_blocks) 605 { 606 struct request_queue *q = sdkp->disk->queue; 607 u32 zone_shift = ilog2(zone_blocks); 608 u32 nr_zones; 609 int ret; 610 611 /* chunk_sectors indicates the zone size */ 612 blk_queue_chunk_sectors(q, 613 logical_to_sectors(sdkp->device, zone_blocks)); 614 nr_zones = round_up(sdkp->capacity, zone_blocks) >> zone_shift; 615 616 /* 617 * Initialize the device request queue information if the number 618 * of zones changed. 619 */ 620 if (nr_zones != sdkp->nr_zones || nr_zones != q->nr_zones) { 621 unsigned long *seq_zones_wlock = NULL, *seq_zones_bitmap = NULL; 622 size_t zone_bitmap_size; 623 624 if (nr_zones) { 625 seq_zones_wlock = sd_zbc_alloc_zone_bitmap(nr_zones, 626 q->node); 627 if (!seq_zones_wlock) { 628 ret = -ENOMEM; 629 goto err; 630 } 631 632 seq_zones_bitmap = sd_zbc_setup_seq_zones_bitmap(sdkp, 633 zone_shift, nr_zones); 634 if (IS_ERR(seq_zones_bitmap)) { 635 ret = PTR_ERR(seq_zones_bitmap); 636 kfree(seq_zones_wlock); 637 goto err; 638 } 639 } 640 zone_bitmap_size = BITS_TO_LONGS(nr_zones) * 641 sizeof(unsigned long); 642 blk_mq_freeze_queue(q); 643 if (q->nr_zones != nr_zones) { 644 /* READ16/WRITE16 is mandatory for ZBC disks */ 645 sdkp->device->use_16_for_rw = 1; 646 sdkp->device->use_10_for_rw = 0; 647 648 sdkp->zone_blocks = zone_blocks; 649 sdkp->zone_shift = zone_shift; 650 sdkp->nr_zones = nr_zones; 651 q->nr_zones = nr_zones; 652 swap(q->seq_zones_wlock, seq_zones_wlock); 653 swap(q->seq_zones_bitmap, seq_zones_bitmap); 654 } else if (memcmp(q->seq_zones_bitmap, seq_zones_bitmap, 655 zone_bitmap_size) != 0) { 656 memcpy(q->seq_zones_bitmap, seq_zones_bitmap, 657 zone_bitmap_size); 658 } 659 blk_mq_unfreeze_queue(q); 660 kfree(seq_zones_wlock); 661 kfree(seq_zones_bitmap); 662 } 663 664 return 0; 665 666 err: 667 sd_zbc_cleanup(sdkp); 668 return ret; 669 } 670 671 int sd_zbc_read_zones(struct scsi_disk *sdkp, unsigned char *buf) 672 { 673 int64_t zone_blocks; 674 int ret; 675 676 if (!sd_is_zoned(sdkp)) 677 /* 678 * Device managed or normal SCSI disk, 679 * no special handling required 680 */ 681 return 0; 682 683 /* Get zoned block device characteristics */ 684 ret = sd_zbc_read_zoned_characteristics(sdkp, buf); 685 if (ret) 686 goto err; 687 688 /* 689 * Check for unconstrained reads: host-managed devices with 690 * constrained reads (drives failing read after write pointer) 691 * are not supported. 692 */ 693 if (!sdkp->urswrz) { 694 if (sdkp->first_scan) 695 sd_printk(KERN_NOTICE, sdkp, 696 "constrained reads devices are not supported\n"); 697 ret = -ENODEV; 698 goto err; 699 } 700 701 /* Check capacity */ 702 ret = sd_zbc_check_capacity(sdkp, buf); 703 if (ret) 704 goto err; 705 706 /* 707 * Check zone size: only devices with a constant zone size (except 708 * an eventual last runt zone) that is a power of 2 are supported. 709 */ 710 zone_blocks = sd_zbc_check_zone_size(sdkp); 711 ret = -EFBIG; 712 if (zone_blocks != (u32)zone_blocks) 713 goto err; 714 ret = zone_blocks; 715 if (ret < 0) 716 goto err; 717 718 /* The drive satisfies the kernel restrictions: set it up */ 719 ret = sd_zbc_setup(sdkp, zone_blocks); 720 if (ret) 721 goto err; 722 723 return 0; 724 725 err: 726 sdkp->capacity = 0; 727 sd_zbc_cleanup(sdkp); 728 729 return ret; 730 } 731 732 void sd_zbc_remove(struct scsi_disk *sdkp) 733 { 734 sd_zbc_cleanup(sdkp); 735 } 736 737 void sd_zbc_print_zones(struct scsi_disk *sdkp) 738 { 739 if (!sd_is_zoned(sdkp) || !sdkp->capacity) 740 return; 741 742 if (sdkp->capacity & (sdkp->zone_blocks - 1)) 743 sd_printk(KERN_NOTICE, sdkp, 744 "%u zones of %u logical blocks + 1 runt zone\n", 745 sdkp->nr_zones - 1, 746 sdkp->zone_blocks); 747 else 748 sd_printk(KERN_NOTICE, sdkp, 749 "%u zones of %u logical blocks\n", 750 sdkp->nr_zones, 751 sdkp->zone_blocks); 752 } 753