xref: /openbmc/linux/drivers/scsi/sd.c (revision e0f6d1a5)
1 /*
2  *      sd.c Copyright (C) 1992 Drew Eckhardt
3  *           Copyright (C) 1993, 1994, 1995, 1999 Eric Youngdale
4  *
5  *      Linux scsi disk driver
6  *              Initial versions: Drew Eckhardt
7  *              Subsequent revisions: Eric Youngdale
8  *	Modification history:
9  *       - Drew Eckhardt <drew@colorado.edu> original
10  *       - Eric Youngdale <eric@andante.org> add scatter-gather, multiple
11  *         outstanding request, and other enhancements.
12  *         Support loadable low-level scsi drivers.
13  *       - Jirka Hanika <geo@ff.cuni.cz> support more scsi disks using
14  *         eight major numbers.
15  *       - Richard Gooch <rgooch@atnf.csiro.au> support devfs.
16  *	 - Torben Mathiasen <tmm@image.dk> Resource allocation fixes in
17  *	   sd_init and cleanups.
18  *	 - Alex Davis <letmein@erols.com> Fix problem where partition info
19  *	   not being read in sd_open. Fix problem where removable media
20  *	   could be ejected after sd_open.
21  *	 - Douglas Gilbert <dgilbert@interlog.com> cleanup for lk 2.5.x
22  *	 - Badari Pulavarty <pbadari@us.ibm.com>, Matthew Wilcox
23  *	   <willy@debian.org>, Kurt Garloff <garloff@suse.de>:
24  *	   Support 32k/1M disks.
25  *
26  *	Logging policy (needs CONFIG_SCSI_LOGGING defined):
27  *	 - setting up transfer: SCSI_LOG_HLQUEUE levels 1 and 2
28  *	 - end of transfer (bh + scsi_lib): SCSI_LOG_HLCOMPLETE level 1
29  *	 - entering sd_ioctl: SCSI_LOG_IOCTL level 1
30  *	 - entering other commands: SCSI_LOG_HLQUEUE level 3
31  *	Note: when the logging level is set by the user, it must be greater
32  *	than the level indicated above to trigger output.
33  */
34 
35 #include <linux/module.h>
36 #include <linux/fs.h>
37 #include <linux/kernel.h>
38 #include <linux/mm.h>
39 #include <linux/bio.h>
40 #include <linux/genhd.h>
41 #include <linux/hdreg.h>
42 #include <linux/errno.h>
43 #include <linux/idr.h>
44 #include <linux/interrupt.h>
45 #include <linux/init.h>
46 #include <linux/blkdev.h>
47 #include <linux/blkpg.h>
48 #include <linux/delay.h>
49 #include <linux/mutex.h>
50 #include <linux/string_helpers.h>
51 #include <linux/async.h>
52 #include <linux/slab.h>
53 #include <linux/sed-opal.h>
54 #include <linux/pm_runtime.h>
55 #include <linux/pr.h>
56 #include <linux/t10-pi.h>
57 #include <linux/uaccess.h>
58 #include <asm/unaligned.h>
59 
60 #include <scsi/scsi.h>
61 #include <scsi/scsi_cmnd.h>
62 #include <scsi/scsi_dbg.h>
63 #include <scsi/scsi_device.h>
64 #include <scsi/scsi_driver.h>
65 #include <scsi/scsi_eh.h>
66 #include <scsi/scsi_host.h>
67 #include <scsi/scsi_ioctl.h>
68 #include <scsi/scsicam.h>
69 
70 #include "sd.h"
71 #include "scsi_priv.h"
72 #include "scsi_logging.h"
73 
74 MODULE_AUTHOR("Eric Youngdale");
75 MODULE_DESCRIPTION("SCSI disk (sd) driver");
76 MODULE_LICENSE("GPL");
77 
78 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK0_MAJOR);
79 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK1_MAJOR);
80 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK2_MAJOR);
81 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK3_MAJOR);
82 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK4_MAJOR);
83 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK5_MAJOR);
84 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK6_MAJOR);
85 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK7_MAJOR);
86 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK8_MAJOR);
87 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK9_MAJOR);
88 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK10_MAJOR);
89 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK11_MAJOR);
90 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK12_MAJOR);
91 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK13_MAJOR);
92 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK14_MAJOR);
93 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK15_MAJOR);
94 MODULE_ALIAS_SCSI_DEVICE(TYPE_DISK);
95 MODULE_ALIAS_SCSI_DEVICE(TYPE_MOD);
96 MODULE_ALIAS_SCSI_DEVICE(TYPE_RBC);
97 MODULE_ALIAS_SCSI_DEVICE(TYPE_ZBC);
98 
99 #if !defined(CONFIG_DEBUG_BLOCK_EXT_DEVT)
100 #define SD_MINORS	16
101 #else
102 #define SD_MINORS	0
103 #endif
104 
105 static void sd_config_discard(struct scsi_disk *, unsigned int);
106 static void sd_config_write_same(struct scsi_disk *);
107 static int  sd_revalidate_disk(struct gendisk *);
108 static void sd_unlock_native_capacity(struct gendisk *disk);
109 static int  sd_probe(struct device *);
110 static int  sd_remove(struct device *);
111 static void sd_shutdown(struct device *);
112 static int sd_suspend_system(struct device *);
113 static int sd_suspend_runtime(struct device *);
114 static int sd_resume(struct device *);
115 static void sd_rescan(struct device *);
116 static int sd_init_command(struct scsi_cmnd *SCpnt);
117 static void sd_uninit_command(struct scsi_cmnd *SCpnt);
118 static int sd_done(struct scsi_cmnd *);
119 static void sd_eh_reset(struct scsi_cmnd *);
120 static int sd_eh_action(struct scsi_cmnd *, int);
121 static void sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer);
122 static void scsi_disk_release(struct device *cdev);
123 static void sd_print_sense_hdr(struct scsi_disk *, struct scsi_sense_hdr *);
124 static void sd_print_result(const struct scsi_disk *, const char *, int);
125 
126 static DEFINE_SPINLOCK(sd_index_lock);
127 static DEFINE_IDA(sd_index_ida);
128 
129 /* This semaphore is used to mediate the 0->1 reference get in the
130  * face of object destruction (i.e. we can't allow a get on an
131  * object after last put) */
132 static DEFINE_MUTEX(sd_ref_mutex);
133 
134 static struct kmem_cache *sd_cdb_cache;
135 static mempool_t *sd_cdb_pool;
136 
137 static const char *sd_cache_types[] = {
138 	"write through", "none", "write back",
139 	"write back, no read (daft)"
140 };
141 
142 static void sd_set_flush_flag(struct scsi_disk *sdkp)
143 {
144 	bool wc = false, fua = false;
145 
146 	if (sdkp->WCE) {
147 		wc = true;
148 		if (sdkp->DPOFUA)
149 			fua = true;
150 	}
151 
152 	blk_queue_write_cache(sdkp->disk->queue, wc, fua);
153 }
154 
155 static ssize_t
156 cache_type_store(struct device *dev, struct device_attribute *attr,
157 		 const char *buf, size_t count)
158 {
159 	int ct, rcd, wce, sp;
160 	struct scsi_disk *sdkp = to_scsi_disk(dev);
161 	struct scsi_device *sdp = sdkp->device;
162 	char buffer[64];
163 	char *buffer_data;
164 	struct scsi_mode_data data;
165 	struct scsi_sense_hdr sshdr;
166 	static const char temp[] = "temporary ";
167 	int len;
168 
169 	if (sdp->type != TYPE_DISK && sdp->type != TYPE_ZBC)
170 		/* no cache control on RBC devices; theoretically they
171 		 * can do it, but there's probably so many exceptions
172 		 * it's not worth the risk */
173 		return -EINVAL;
174 
175 	if (strncmp(buf, temp, sizeof(temp) - 1) == 0) {
176 		buf += sizeof(temp) - 1;
177 		sdkp->cache_override = 1;
178 	} else {
179 		sdkp->cache_override = 0;
180 	}
181 
182 	ct = sysfs_match_string(sd_cache_types, buf);
183 	if (ct < 0)
184 		return -EINVAL;
185 
186 	rcd = ct & 0x01 ? 1 : 0;
187 	wce = (ct & 0x02) && !sdkp->write_prot ? 1 : 0;
188 
189 	if (sdkp->cache_override) {
190 		sdkp->WCE = wce;
191 		sdkp->RCD = rcd;
192 		sd_set_flush_flag(sdkp);
193 		return count;
194 	}
195 
196 	if (scsi_mode_sense(sdp, 0x08, 8, buffer, sizeof(buffer), SD_TIMEOUT,
197 			    SD_MAX_RETRIES, &data, NULL))
198 		return -EINVAL;
199 	len = min_t(size_t, sizeof(buffer), data.length - data.header_length -
200 		  data.block_descriptor_length);
201 	buffer_data = buffer + data.header_length +
202 		data.block_descriptor_length;
203 	buffer_data[2] &= ~0x05;
204 	buffer_data[2] |= wce << 2 | rcd;
205 	sp = buffer_data[0] & 0x80 ? 1 : 0;
206 	buffer_data[0] &= ~0x80;
207 
208 	if (scsi_mode_select(sdp, 1, sp, 8, buffer_data, len, SD_TIMEOUT,
209 			     SD_MAX_RETRIES, &data, &sshdr)) {
210 		if (scsi_sense_valid(&sshdr))
211 			sd_print_sense_hdr(sdkp, &sshdr);
212 		return -EINVAL;
213 	}
214 	revalidate_disk(sdkp->disk);
215 	return count;
216 }
217 
218 static ssize_t
219 manage_start_stop_show(struct device *dev, struct device_attribute *attr,
220 		       char *buf)
221 {
222 	struct scsi_disk *sdkp = to_scsi_disk(dev);
223 	struct scsi_device *sdp = sdkp->device;
224 
225 	return sprintf(buf, "%u\n", sdp->manage_start_stop);
226 }
227 
228 static ssize_t
229 manage_start_stop_store(struct device *dev, struct device_attribute *attr,
230 			const char *buf, size_t count)
231 {
232 	struct scsi_disk *sdkp = to_scsi_disk(dev);
233 	struct scsi_device *sdp = sdkp->device;
234 	bool v;
235 
236 	if (!capable(CAP_SYS_ADMIN))
237 		return -EACCES;
238 
239 	if (kstrtobool(buf, &v))
240 		return -EINVAL;
241 
242 	sdp->manage_start_stop = v;
243 
244 	return count;
245 }
246 static DEVICE_ATTR_RW(manage_start_stop);
247 
248 static ssize_t
249 allow_restart_show(struct device *dev, struct device_attribute *attr, char *buf)
250 {
251 	struct scsi_disk *sdkp = to_scsi_disk(dev);
252 
253 	return sprintf(buf, "%u\n", sdkp->device->allow_restart);
254 }
255 
256 static ssize_t
257 allow_restart_store(struct device *dev, struct device_attribute *attr,
258 		    const char *buf, size_t count)
259 {
260 	bool v;
261 	struct scsi_disk *sdkp = to_scsi_disk(dev);
262 	struct scsi_device *sdp = sdkp->device;
263 
264 	if (!capable(CAP_SYS_ADMIN))
265 		return -EACCES;
266 
267 	if (sdp->type != TYPE_DISK && sdp->type != TYPE_ZBC)
268 		return -EINVAL;
269 
270 	if (kstrtobool(buf, &v))
271 		return -EINVAL;
272 
273 	sdp->allow_restart = v;
274 
275 	return count;
276 }
277 static DEVICE_ATTR_RW(allow_restart);
278 
279 static ssize_t
280 cache_type_show(struct device *dev, struct device_attribute *attr, char *buf)
281 {
282 	struct scsi_disk *sdkp = to_scsi_disk(dev);
283 	int ct = sdkp->RCD + 2*sdkp->WCE;
284 
285 	return sprintf(buf, "%s\n", sd_cache_types[ct]);
286 }
287 static DEVICE_ATTR_RW(cache_type);
288 
289 static ssize_t
290 FUA_show(struct device *dev, struct device_attribute *attr, char *buf)
291 {
292 	struct scsi_disk *sdkp = to_scsi_disk(dev);
293 
294 	return sprintf(buf, "%u\n", sdkp->DPOFUA);
295 }
296 static DEVICE_ATTR_RO(FUA);
297 
298 static ssize_t
299 protection_type_show(struct device *dev, struct device_attribute *attr,
300 		     char *buf)
301 {
302 	struct scsi_disk *sdkp = to_scsi_disk(dev);
303 
304 	return sprintf(buf, "%u\n", sdkp->protection_type);
305 }
306 
307 static ssize_t
308 protection_type_store(struct device *dev, struct device_attribute *attr,
309 		      const char *buf, size_t count)
310 {
311 	struct scsi_disk *sdkp = to_scsi_disk(dev);
312 	unsigned int val;
313 	int err;
314 
315 	if (!capable(CAP_SYS_ADMIN))
316 		return -EACCES;
317 
318 	err = kstrtouint(buf, 10, &val);
319 
320 	if (err)
321 		return err;
322 
323 	if (val <= T10_PI_TYPE3_PROTECTION)
324 		sdkp->protection_type = val;
325 
326 	return count;
327 }
328 static DEVICE_ATTR_RW(protection_type);
329 
330 static ssize_t
331 protection_mode_show(struct device *dev, struct device_attribute *attr,
332 		     char *buf)
333 {
334 	struct scsi_disk *sdkp = to_scsi_disk(dev);
335 	struct scsi_device *sdp = sdkp->device;
336 	unsigned int dif, dix;
337 
338 	dif = scsi_host_dif_capable(sdp->host, sdkp->protection_type);
339 	dix = scsi_host_dix_capable(sdp->host, sdkp->protection_type);
340 
341 	if (!dix && scsi_host_dix_capable(sdp->host, T10_PI_TYPE0_PROTECTION)) {
342 		dif = 0;
343 		dix = 1;
344 	}
345 
346 	if (!dif && !dix)
347 		return sprintf(buf, "none\n");
348 
349 	return sprintf(buf, "%s%u\n", dix ? "dix" : "dif", dif);
350 }
351 static DEVICE_ATTR_RO(protection_mode);
352 
353 static ssize_t
354 app_tag_own_show(struct device *dev, struct device_attribute *attr, char *buf)
355 {
356 	struct scsi_disk *sdkp = to_scsi_disk(dev);
357 
358 	return sprintf(buf, "%u\n", sdkp->ATO);
359 }
360 static DEVICE_ATTR_RO(app_tag_own);
361 
362 static ssize_t
363 thin_provisioning_show(struct device *dev, struct device_attribute *attr,
364 		       char *buf)
365 {
366 	struct scsi_disk *sdkp = to_scsi_disk(dev);
367 
368 	return sprintf(buf, "%u\n", sdkp->lbpme);
369 }
370 static DEVICE_ATTR_RO(thin_provisioning);
371 
372 /* sysfs_match_string() requires dense arrays */
373 static const char *lbp_mode[] = {
374 	[SD_LBP_FULL]		= "full",
375 	[SD_LBP_UNMAP]		= "unmap",
376 	[SD_LBP_WS16]		= "writesame_16",
377 	[SD_LBP_WS10]		= "writesame_10",
378 	[SD_LBP_ZERO]		= "writesame_zero",
379 	[SD_LBP_DISABLE]	= "disabled",
380 };
381 
382 static ssize_t
383 provisioning_mode_show(struct device *dev, struct device_attribute *attr,
384 		       char *buf)
385 {
386 	struct scsi_disk *sdkp = to_scsi_disk(dev);
387 
388 	return sprintf(buf, "%s\n", lbp_mode[sdkp->provisioning_mode]);
389 }
390 
391 static ssize_t
392 provisioning_mode_store(struct device *dev, struct device_attribute *attr,
393 			const char *buf, size_t count)
394 {
395 	struct scsi_disk *sdkp = to_scsi_disk(dev);
396 	struct scsi_device *sdp = sdkp->device;
397 	int mode;
398 
399 	if (!capable(CAP_SYS_ADMIN))
400 		return -EACCES;
401 
402 	if (sd_is_zoned(sdkp)) {
403 		sd_config_discard(sdkp, SD_LBP_DISABLE);
404 		return count;
405 	}
406 
407 	if (sdp->type != TYPE_DISK)
408 		return -EINVAL;
409 
410 	mode = sysfs_match_string(lbp_mode, buf);
411 	if (mode < 0)
412 		return -EINVAL;
413 
414 	sd_config_discard(sdkp, mode);
415 
416 	return count;
417 }
418 static DEVICE_ATTR_RW(provisioning_mode);
419 
420 /* sysfs_match_string() requires dense arrays */
421 static const char *zeroing_mode[] = {
422 	[SD_ZERO_WRITE]		= "write",
423 	[SD_ZERO_WS]		= "writesame",
424 	[SD_ZERO_WS16_UNMAP]	= "writesame_16_unmap",
425 	[SD_ZERO_WS10_UNMAP]	= "writesame_10_unmap",
426 };
427 
428 static ssize_t
429 zeroing_mode_show(struct device *dev, struct device_attribute *attr,
430 		  char *buf)
431 {
432 	struct scsi_disk *sdkp = to_scsi_disk(dev);
433 
434 	return sprintf(buf, "%s\n", zeroing_mode[sdkp->zeroing_mode]);
435 }
436 
437 static ssize_t
438 zeroing_mode_store(struct device *dev, struct device_attribute *attr,
439 		   const char *buf, size_t count)
440 {
441 	struct scsi_disk *sdkp = to_scsi_disk(dev);
442 	int mode;
443 
444 	if (!capable(CAP_SYS_ADMIN))
445 		return -EACCES;
446 
447 	mode = sysfs_match_string(zeroing_mode, buf);
448 	if (mode < 0)
449 		return -EINVAL;
450 
451 	sdkp->zeroing_mode = mode;
452 
453 	return count;
454 }
455 static DEVICE_ATTR_RW(zeroing_mode);
456 
457 static ssize_t
458 max_medium_access_timeouts_show(struct device *dev,
459 				struct device_attribute *attr, char *buf)
460 {
461 	struct scsi_disk *sdkp = to_scsi_disk(dev);
462 
463 	return sprintf(buf, "%u\n", sdkp->max_medium_access_timeouts);
464 }
465 
466 static ssize_t
467 max_medium_access_timeouts_store(struct device *dev,
468 				 struct device_attribute *attr, const char *buf,
469 				 size_t count)
470 {
471 	struct scsi_disk *sdkp = to_scsi_disk(dev);
472 	int err;
473 
474 	if (!capable(CAP_SYS_ADMIN))
475 		return -EACCES;
476 
477 	err = kstrtouint(buf, 10, &sdkp->max_medium_access_timeouts);
478 
479 	return err ? err : count;
480 }
481 static DEVICE_ATTR_RW(max_medium_access_timeouts);
482 
483 static ssize_t
484 max_write_same_blocks_show(struct device *dev, struct device_attribute *attr,
485 			   char *buf)
486 {
487 	struct scsi_disk *sdkp = to_scsi_disk(dev);
488 
489 	return sprintf(buf, "%u\n", sdkp->max_ws_blocks);
490 }
491 
492 static ssize_t
493 max_write_same_blocks_store(struct device *dev, struct device_attribute *attr,
494 			    const char *buf, size_t count)
495 {
496 	struct scsi_disk *sdkp = to_scsi_disk(dev);
497 	struct scsi_device *sdp = sdkp->device;
498 	unsigned long max;
499 	int err;
500 
501 	if (!capable(CAP_SYS_ADMIN))
502 		return -EACCES;
503 
504 	if (sdp->type != TYPE_DISK && sdp->type != TYPE_ZBC)
505 		return -EINVAL;
506 
507 	err = kstrtoul(buf, 10, &max);
508 
509 	if (err)
510 		return err;
511 
512 	if (max == 0)
513 		sdp->no_write_same = 1;
514 	else if (max <= SD_MAX_WS16_BLOCKS) {
515 		sdp->no_write_same = 0;
516 		sdkp->max_ws_blocks = max;
517 	}
518 
519 	sd_config_write_same(sdkp);
520 
521 	return count;
522 }
523 static DEVICE_ATTR_RW(max_write_same_blocks);
524 
525 static struct attribute *sd_disk_attrs[] = {
526 	&dev_attr_cache_type.attr,
527 	&dev_attr_FUA.attr,
528 	&dev_attr_allow_restart.attr,
529 	&dev_attr_manage_start_stop.attr,
530 	&dev_attr_protection_type.attr,
531 	&dev_attr_protection_mode.attr,
532 	&dev_attr_app_tag_own.attr,
533 	&dev_attr_thin_provisioning.attr,
534 	&dev_attr_provisioning_mode.attr,
535 	&dev_attr_zeroing_mode.attr,
536 	&dev_attr_max_write_same_blocks.attr,
537 	&dev_attr_max_medium_access_timeouts.attr,
538 	NULL,
539 };
540 ATTRIBUTE_GROUPS(sd_disk);
541 
542 static struct class sd_disk_class = {
543 	.name		= "scsi_disk",
544 	.owner		= THIS_MODULE,
545 	.dev_release	= scsi_disk_release,
546 	.dev_groups	= sd_disk_groups,
547 };
548 
549 static const struct dev_pm_ops sd_pm_ops = {
550 	.suspend		= sd_suspend_system,
551 	.resume			= sd_resume,
552 	.poweroff		= sd_suspend_system,
553 	.restore		= sd_resume,
554 	.runtime_suspend	= sd_suspend_runtime,
555 	.runtime_resume		= sd_resume,
556 };
557 
558 static struct scsi_driver sd_template = {
559 	.gendrv = {
560 		.name		= "sd",
561 		.owner		= THIS_MODULE,
562 		.probe		= sd_probe,
563 		.remove		= sd_remove,
564 		.shutdown	= sd_shutdown,
565 		.pm		= &sd_pm_ops,
566 	},
567 	.rescan			= sd_rescan,
568 	.init_command		= sd_init_command,
569 	.uninit_command		= sd_uninit_command,
570 	.done			= sd_done,
571 	.eh_action		= sd_eh_action,
572 	.eh_reset		= sd_eh_reset,
573 };
574 
575 /*
576  * Dummy kobj_map->probe function.
577  * The default ->probe function will call modprobe, which is
578  * pointless as this module is already loaded.
579  */
580 static struct kobject *sd_default_probe(dev_t devt, int *partno, void *data)
581 {
582 	return NULL;
583 }
584 
585 /*
586  * Device no to disk mapping:
587  *
588  *       major         disc2     disc  p1
589  *   |............|.............|....|....| <- dev_t
590  *    31        20 19          8 7  4 3  0
591  *
592  * Inside a major, we have 16k disks, however mapped non-
593  * contiguously. The first 16 disks are for major0, the next
594  * ones with major1, ... Disk 256 is for major0 again, disk 272
595  * for major1, ...
596  * As we stay compatible with our numbering scheme, we can reuse
597  * the well-know SCSI majors 8, 65--71, 136--143.
598  */
599 static int sd_major(int major_idx)
600 {
601 	switch (major_idx) {
602 	case 0:
603 		return SCSI_DISK0_MAJOR;
604 	case 1 ... 7:
605 		return SCSI_DISK1_MAJOR + major_idx - 1;
606 	case 8 ... 15:
607 		return SCSI_DISK8_MAJOR + major_idx - 8;
608 	default:
609 		BUG();
610 		return 0;	/* shut up gcc */
611 	}
612 }
613 
614 static struct scsi_disk *scsi_disk_get(struct gendisk *disk)
615 {
616 	struct scsi_disk *sdkp = NULL;
617 
618 	mutex_lock(&sd_ref_mutex);
619 
620 	if (disk->private_data) {
621 		sdkp = scsi_disk(disk);
622 		if (scsi_device_get(sdkp->device) == 0)
623 			get_device(&sdkp->dev);
624 		else
625 			sdkp = NULL;
626 	}
627 	mutex_unlock(&sd_ref_mutex);
628 	return sdkp;
629 }
630 
631 static void scsi_disk_put(struct scsi_disk *sdkp)
632 {
633 	struct scsi_device *sdev = sdkp->device;
634 
635 	mutex_lock(&sd_ref_mutex);
636 	put_device(&sdkp->dev);
637 	scsi_device_put(sdev);
638 	mutex_unlock(&sd_ref_mutex);
639 }
640 
641 #ifdef CONFIG_BLK_SED_OPAL
642 static int sd_sec_submit(void *data, u16 spsp, u8 secp, void *buffer,
643 		size_t len, bool send)
644 {
645 	struct scsi_device *sdev = data;
646 	u8 cdb[12] = { 0, };
647 	int ret;
648 
649 	cdb[0] = send ? SECURITY_PROTOCOL_OUT : SECURITY_PROTOCOL_IN;
650 	cdb[1] = secp;
651 	put_unaligned_be16(spsp, &cdb[2]);
652 	put_unaligned_be32(len, &cdb[6]);
653 
654 	ret = scsi_execute_req(sdev, cdb,
655 			send ? DMA_TO_DEVICE : DMA_FROM_DEVICE,
656 			buffer, len, NULL, SD_TIMEOUT, SD_MAX_RETRIES, NULL);
657 	return ret <= 0 ? ret : -EIO;
658 }
659 #endif /* CONFIG_BLK_SED_OPAL */
660 
661 static unsigned char sd_setup_protect_cmnd(struct scsi_cmnd *scmd,
662 					   unsigned int dix, unsigned int dif)
663 {
664 	struct bio *bio = scmd->request->bio;
665 	unsigned int prot_op = sd_prot_op(rq_data_dir(scmd->request), dix, dif);
666 	unsigned int protect = 0;
667 
668 	if (dix) {				/* DIX Type 0, 1, 2, 3 */
669 		if (bio_integrity_flagged(bio, BIP_IP_CHECKSUM))
670 			scmd->prot_flags |= SCSI_PROT_IP_CHECKSUM;
671 
672 		if (bio_integrity_flagged(bio, BIP_CTRL_NOCHECK) == false)
673 			scmd->prot_flags |= SCSI_PROT_GUARD_CHECK;
674 	}
675 
676 	if (dif != T10_PI_TYPE3_PROTECTION) {	/* DIX/DIF Type 0, 1, 2 */
677 		scmd->prot_flags |= SCSI_PROT_REF_INCREMENT;
678 
679 		if (bio_integrity_flagged(bio, BIP_CTRL_NOCHECK) == false)
680 			scmd->prot_flags |= SCSI_PROT_REF_CHECK;
681 	}
682 
683 	if (dif) {				/* DIX/DIF Type 1, 2, 3 */
684 		scmd->prot_flags |= SCSI_PROT_TRANSFER_PI;
685 
686 		if (bio_integrity_flagged(bio, BIP_DISK_NOCHECK))
687 			protect = 3 << 5;	/* Disable target PI checking */
688 		else
689 			protect = 1 << 5;	/* Enable target PI checking */
690 	}
691 
692 	scsi_set_prot_op(scmd, prot_op);
693 	scsi_set_prot_type(scmd, dif);
694 	scmd->prot_flags &= sd_prot_flag_mask(prot_op);
695 
696 	return protect;
697 }
698 
699 static void sd_config_discard(struct scsi_disk *sdkp, unsigned int mode)
700 {
701 	struct request_queue *q = sdkp->disk->queue;
702 	unsigned int logical_block_size = sdkp->device->sector_size;
703 	unsigned int max_blocks = 0;
704 
705 	q->limits.discard_alignment =
706 		sdkp->unmap_alignment * logical_block_size;
707 	q->limits.discard_granularity =
708 		max(sdkp->physical_block_size,
709 		    sdkp->unmap_granularity * logical_block_size);
710 	sdkp->provisioning_mode = mode;
711 
712 	switch (mode) {
713 
714 	case SD_LBP_FULL:
715 	case SD_LBP_DISABLE:
716 		blk_queue_max_discard_sectors(q, 0);
717 		blk_queue_flag_clear(QUEUE_FLAG_DISCARD, q);
718 		return;
719 
720 	case SD_LBP_UNMAP:
721 		max_blocks = min_not_zero(sdkp->max_unmap_blocks,
722 					  (u32)SD_MAX_WS16_BLOCKS);
723 		break;
724 
725 	case SD_LBP_WS16:
726 		if (sdkp->device->unmap_limit_for_ws)
727 			max_blocks = sdkp->max_unmap_blocks;
728 		else
729 			max_blocks = sdkp->max_ws_blocks;
730 
731 		max_blocks = min_not_zero(max_blocks, (u32)SD_MAX_WS16_BLOCKS);
732 		break;
733 
734 	case SD_LBP_WS10:
735 		if (sdkp->device->unmap_limit_for_ws)
736 			max_blocks = sdkp->max_unmap_blocks;
737 		else
738 			max_blocks = sdkp->max_ws_blocks;
739 
740 		max_blocks = min_not_zero(max_blocks, (u32)SD_MAX_WS10_BLOCKS);
741 		break;
742 
743 	case SD_LBP_ZERO:
744 		max_blocks = min_not_zero(sdkp->max_ws_blocks,
745 					  (u32)SD_MAX_WS10_BLOCKS);
746 		break;
747 	}
748 
749 	blk_queue_max_discard_sectors(q, max_blocks * (logical_block_size >> 9));
750 	blk_queue_flag_set(QUEUE_FLAG_DISCARD, q);
751 }
752 
753 static int sd_setup_unmap_cmnd(struct scsi_cmnd *cmd)
754 {
755 	struct scsi_device *sdp = cmd->device;
756 	struct request *rq = cmd->request;
757 	u64 sector = blk_rq_pos(rq) >> (ilog2(sdp->sector_size) - 9);
758 	u32 nr_sectors = blk_rq_sectors(rq) >> (ilog2(sdp->sector_size) - 9);
759 	unsigned int data_len = 24;
760 	char *buf;
761 
762 	rq->special_vec.bv_page = alloc_page(GFP_ATOMIC | __GFP_ZERO);
763 	if (!rq->special_vec.bv_page)
764 		return BLKPREP_DEFER;
765 	rq->special_vec.bv_offset = 0;
766 	rq->special_vec.bv_len = data_len;
767 	rq->rq_flags |= RQF_SPECIAL_PAYLOAD;
768 
769 	cmd->cmd_len = 10;
770 	cmd->cmnd[0] = UNMAP;
771 	cmd->cmnd[8] = 24;
772 
773 	buf = page_address(rq->special_vec.bv_page);
774 	put_unaligned_be16(6 + 16, &buf[0]);
775 	put_unaligned_be16(16, &buf[2]);
776 	put_unaligned_be64(sector, &buf[8]);
777 	put_unaligned_be32(nr_sectors, &buf[16]);
778 
779 	cmd->allowed = SD_MAX_RETRIES;
780 	cmd->transfersize = data_len;
781 	rq->timeout = SD_TIMEOUT;
782 	scsi_req(rq)->resid_len = data_len;
783 
784 	return scsi_init_io(cmd);
785 }
786 
787 static int sd_setup_write_same16_cmnd(struct scsi_cmnd *cmd, bool unmap)
788 {
789 	struct scsi_device *sdp = cmd->device;
790 	struct request *rq = cmd->request;
791 	u64 sector = blk_rq_pos(rq) >> (ilog2(sdp->sector_size) - 9);
792 	u32 nr_sectors = blk_rq_sectors(rq) >> (ilog2(sdp->sector_size) - 9);
793 	u32 data_len = sdp->sector_size;
794 
795 	rq->special_vec.bv_page = alloc_page(GFP_ATOMIC | __GFP_ZERO);
796 	if (!rq->special_vec.bv_page)
797 		return BLKPREP_DEFER;
798 	rq->special_vec.bv_offset = 0;
799 	rq->special_vec.bv_len = data_len;
800 	rq->rq_flags |= RQF_SPECIAL_PAYLOAD;
801 
802 	cmd->cmd_len = 16;
803 	cmd->cmnd[0] = WRITE_SAME_16;
804 	if (unmap)
805 		cmd->cmnd[1] = 0x8; /* UNMAP */
806 	put_unaligned_be64(sector, &cmd->cmnd[2]);
807 	put_unaligned_be32(nr_sectors, &cmd->cmnd[10]);
808 
809 	cmd->allowed = SD_MAX_RETRIES;
810 	cmd->transfersize = data_len;
811 	rq->timeout = unmap ? SD_TIMEOUT : SD_WRITE_SAME_TIMEOUT;
812 	scsi_req(rq)->resid_len = data_len;
813 
814 	return scsi_init_io(cmd);
815 }
816 
817 static int sd_setup_write_same10_cmnd(struct scsi_cmnd *cmd, bool unmap)
818 {
819 	struct scsi_device *sdp = cmd->device;
820 	struct request *rq = cmd->request;
821 	u64 sector = blk_rq_pos(rq) >> (ilog2(sdp->sector_size) - 9);
822 	u32 nr_sectors = blk_rq_sectors(rq) >> (ilog2(sdp->sector_size) - 9);
823 	u32 data_len = sdp->sector_size;
824 
825 	rq->special_vec.bv_page = alloc_page(GFP_ATOMIC | __GFP_ZERO);
826 	if (!rq->special_vec.bv_page)
827 		return BLKPREP_DEFER;
828 	rq->special_vec.bv_offset = 0;
829 	rq->special_vec.bv_len = data_len;
830 	rq->rq_flags |= RQF_SPECIAL_PAYLOAD;
831 
832 	cmd->cmd_len = 10;
833 	cmd->cmnd[0] = WRITE_SAME;
834 	if (unmap)
835 		cmd->cmnd[1] = 0x8; /* UNMAP */
836 	put_unaligned_be32(sector, &cmd->cmnd[2]);
837 	put_unaligned_be16(nr_sectors, &cmd->cmnd[7]);
838 
839 	cmd->allowed = SD_MAX_RETRIES;
840 	cmd->transfersize = data_len;
841 	rq->timeout = unmap ? SD_TIMEOUT : SD_WRITE_SAME_TIMEOUT;
842 	scsi_req(rq)->resid_len = data_len;
843 
844 	return scsi_init_io(cmd);
845 }
846 
847 static int sd_setup_write_zeroes_cmnd(struct scsi_cmnd *cmd)
848 {
849 	struct request *rq = cmd->request;
850 	struct scsi_device *sdp = cmd->device;
851 	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
852 	u64 sector = blk_rq_pos(rq) >> (ilog2(sdp->sector_size) - 9);
853 	u32 nr_sectors = blk_rq_sectors(rq) >> (ilog2(sdp->sector_size) - 9);
854 
855 	if (!(rq->cmd_flags & REQ_NOUNMAP)) {
856 		switch (sdkp->zeroing_mode) {
857 		case SD_ZERO_WS16_UNMAP:
858 			return sd_setup_write_same16_cmnd(cmd, true);
859 		case SD_ZERO_WS10_UNMAP:
860 			return sd_setup_write_same10_cmnd(cmd, true);
861 		}
862 	}
863 
864 	if (sdp->no_write_same)
865 		return BLKPREP_INVALID;
866 
867 	if (sdkp->ws16 || sector > 0xffffffff || nr_sectors > 0xffff)
868 		return sd_setup_write_same16_cmnd(cmd, false);
869 
870 	return sd_setup_write_same10_cmnd(cmd, false);
871 }
872 
873 static void sd_config_write_same(struct scsi_disk *sdkp)
874 {
875 	struct request_queue *q = sdkp->disk->queue;
876 	unsigned int logical_block_size = sdkp->device->sector_size;
877 
878 	if (sdkp->device->no_write_same) {
879 		sdkp->max_ws_blocks = 0;
880 		goto out;
881 	}
882 
883 	/* Some devices can not handle block counts above 0xffff despite
884 	 * supporting WRITE SAME(16). Consequently we default to 64k
885 	 * blocks per I/O unless the device explicitly advertises a
886 	 * bigger limit.
887 	 */
888 	if (sdkp->max_ws_blocks > SD_MAX_WS10_BLOCKS)
889 		sdkp->max_ws_blocks = min_not_zero(sdkp->max_ws_blocks,
890 						   (u32)SD_MAX_WS16_BLOCKS);
891 	else if (sdkp->ws16 || sdkp->ws10 || sdkp->device->no_report_opcodes)
892 		sdkp->max_ws_blocks = min_not_zero(sdkp->max_ws_blocks,
893 						   (u32)SD_MAX_WS10_BLOCKS);
894 	else {
895 		sdkp->device->no_write_same = 1;
896 		sdkp->max_ws_blocks = 0;
897 	}
898 
899 	if (sdkp->lbprz && sdkp->lbpws)
900 		sdkp->zeroing_mode = SD_ZERO_WS16_UNMAP;
901 	else if (sdkp->lbprz && sdkp->lbpws10)
902 		sdkp->zeroing_mode = SD_ZERO_WS10_UNMAP;
903 	else if (sdkp->max_ws_blocks)
904 		sdkp->zeroing_mode = SD_ZERO_WS;
905 	else
906 		sdkp->zeroing_mode = SD_ZERO_WRITE;
907 
908 	if (sdkp->max_ws_blocks &&
909 	    sdkp->physical_block_size > logical_block_size) {
910 		/*
911 		 * Reporting a maximum number of blocks that is not aligned
912 		 * on the device physical size would cause a large write same
913 		 * request to be split into physically unaligned chunks by
914 		 * __blkdev_issue_write_zeroes() and __blkdev_issue_write_same()
915 		 * even if the caller of these functions took care to align the
916 		 * large request. So make sure the maximum reported is aligned
917 		 * to the device physical block size. This is only an optional
918 		 * optimization for regular disks, but this is mandatory to
919 		 * avoid failure of large write same requests directed at
920 		 * sequential write required zones of host-managed ZBC disks.
921 		 */
922 		sdkp->max_ws_blocks =
923 			round_down(sdkp->max_ws_blocks,
924 				   bytes_to_logical(sdkp->device,
925 						    sdkp->physical_block_size));
926 	}
927 
928 out:
929 	blk_queue_max_write_same_sectors(q, sdkp->max_ws_blocks *
930 					 (logical_block_size >> 9));
931 	blk_queue_max_write_zeroes_sectors(q, sdkp->max_ws_blocks *
932 					 (logical_block_size >> 9));
933 }
934 
935 /**
936  * sd_setup_write_same_cmnd - write the same data to multiple blocks
937  * @cmd: command to prepare
938  *
939  * Will set up either WRITE SAME(10) or WRITE SAME(16) depending on
940  * the preference indicated by the target device.
941  **/
942 static int sd_setup_write_same_cmnd(struct scsi_cmnd *cmd)
943 {
944 	struct request *rq = cmd->request;
945 	struct scsi_device *sdp = cmd->device;
946 	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
947 	struct bio *bio = rq->bio;
948 	sector_t sector = blk_rq_pos(rq);
949 	unsigned int nr_sectors = blk_rq_sectors(rq);
950 	unsigned int nr_bytes = blk_rq_bytes(rq);
951 	int ret;
952 
953 	if (sdkp->device->no_write_same)
954 		return BLKPREP_INVALID;
955 
956 	BUG_ON(bio_offset(bio) || bio_iovec(bio).bv_len != sdp->sector_size);
957 
958 	sector >>= ilog2(sdp->sector_size) - 9;
959 	nr_sectors >>= ilog2(sdp->sector_size) - 9;
960 
961 	rq->timeout = SD_WRITE_SAME_TIMEOUT;
962 
963 	if (sdkp->ws16 || sector > 0xffffffff || nr_sectors > 0xffff) {
964 		cmd->cmd_len = 16;
965 		cmd->cmnd[0] = WRITE_SAME_16;
966 		put_unaligned_be64(sector, &cmd->cmnd[2]);
967 		put_unaligned_be32(nr_sectors, &cmd->cmnd[10]);
968 	} else {
969 		cmd->cmd_len = 10;
970 		cmd->cmnd[0] = WRITE_SAME;
971 		put_unaligned_be32(sector, &cmd->cmnd[2]);
972 		put_unaligned_be16(nr_sectors, &cmd->cmnd[7]);
973 	}
974 
975 	cmd->transfersize = sdp->sector_size;
976 	cmd->allowed = SD_MAX_RETRIES;
977 
978 	/*
979 	 * For WRITE SAME the data transferred via the DATA OUT buffer is
980 	 * different from the amount of data actually written to the target.
981 	 *
982 	 * We set up __data_len to the amount of data transferred via the
983 	 * DATA OUT buffer so that blk_rq_map_sg sets up the proper S/G list
984 	 * to transfer a single sector of data first, but then reset it to
985 	 * the amount of data to be written right after so that the I/O path
986 	 * knows how much to actually write.
987 	 */
988 	rq->__data_len = sdp->sector_size;
989 	ret = scsi_init_io(cmd);
990 	rq->__data_len = nr_bytes;
991 
992 	return ret;
993 }
994 
995 static int sd_setup_flush_cmnd(struct scsi_cmnd *cmd)
996 {
997 	struct request *rq = cmd->request;
998 
999 	/* flush requests don't perform I/O, zero the S/G table */
1000 	memset(&cmd->sdb, 0, sizeof(cmd->sdb));
1001 
1002 	cmd->cmnd[0] = SYNCHRONIZE_CACHE;
1003 	cmd->cmd_len = 10;
1004 	cmd->transfersize = 0;
1005 	cmd->allowed = SD_MAX_RETRIES;
1006 
1007 	rq->timeout = rq->q->rq_timeout * SD_FLUSH_TIMEOUT_MULTIPLIER;
1008 	return BLKPREP_OK;
1009 }
1010 
1011 static int sd_setup_read_write_cmnd(struct scsi_cmnd *SCpnt)
1012 {
1013 	struct request *rq = SCpnt->request;
1014 	struct scsi_device *sdp = SCpnt->device;
1015 	struct gendisk *disk = rq->rq_disk;
1016 	struct scsi_disk *sdkp = scsi_disk(disk);
1017 	sector_t block = blk_rq_pos(rq);
1018 	sector_t threshold;
1019 	unsigned int this_count = blk_rq_sectors(rq);
1020 	unsigned int dif, dix;
1021 	int ret;
1022 	unsigned char protect;
1023 
1024 	ret = scsi_init_io(SCpnt);
1025 	if (ret != BLKPREP_OK)
1026 		return ret;
1027 	WARN_ON_ONCE(SCpnt != rq->special);
1028 
1029 	/* from here on until we're complete, any goto out
1030 	 * is used for a killable error condition */
1031 	ret = BLKPREP_KILL;
1032 
1033 	SCSI_LOG_HLQUEUE(1,
1034 		scmd_printk(KERN_INFO, SCpnt,
1035 			"%s: block=%llu, count=%d\n",
1036 			__func__, (unsigned long long)block, this_count));
1037 
1038 	if (!sdp || !scsi_device_online(sdp) ||
1039 	    block + blk_rq_sectors(rq) > get_capacity(disk)) {
1040 		SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
1041 						"Finishing %u sectors\n",
1042 						blk_rq_sectors(rq)));
1043 		SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
1044 						"Retry with 0x%p\n", SCpnt));
1045 		goto out;
1046 	}
1047 
1048 	if (sdp->changed) {
1049 		/*
1050 		 * quietly refuse to do anything to a changed disc until
1051 		 * the changed bit has been reset
1052 		 */
1053 		/* printk("SCSI disk has been changed or is not present. Prohibiting further I/O.\n"); */
1054 		goto out;
1055 	}
1056 
1057 	/*
1058 	 * Some SD card readers can't handle multi-sector accesses which touch
1059 	 * the last one or two hardware sectors.  Split accesses as needed.
1060 	 */
1061 	threshold = get_capacity(disk) - SD_LAST_BUGGY_SECTORS *
1062 		(sdp->sector_size / 512);
1063 
1064 	if (unlikely(sdp->last_sector_bug && block + this_count > threshold)) {
1065 		if (block < threshold) {
1066 			/* Access up to the threshold but not beyond */
1067 			this_count = threshold - block;
1068 		} else {
1069 			/* Access only a single hardware sector */
1070 			this_count = sdp->sector_size / 512;
1071 		}
1072 	}
1073 
1074 	SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, "block=%llu\n",
1075 					(unsigned long long)block));
1076 
1077 	/*
1078 	 * If we have a 1K hardware sectorsize, prevent access to single
1079 	 * 512 byte sectors.  In theory we could handle this - in fact
1080 	 * the scsi cdrom driver must be able to handle this because
1081 	 * we typically use 1K blocksizes, and cdroms typically have
1082 	 * 2K hardware sectorsizes.  Of course, things are simpler
1083 	 * with the cdrom, since it is read-only.  For performance
1084 	 * reasons, the filesystems should be able to handle this
1085 	 * and not force the scsi disk driver to use bounce buffers
1086 	 * for this.
1087 	 */
1088 	if (sdp->sector_size == 1024) {
1089 		if ((block & 1) || (blk_rq_sectors(rq) & 1)) {
1090 			scmd_printk(KERN_ERR, SCpnt,
1091 				    "Bad block number requested\n");
1092 			goto out;
1093 		} else {
1094 			block = block >> 1;
1095 			this_count = this_count >> 1;
1096 		}
1097 	}
1098 	if (sdp->sector_size == 2048) {
1099 		if ((block & 3) || (blk_rq_sectors(rq) & 3)) {
1100 			scmd_printk(KERN_ERR, SCpnt,
1101 				    "Bad block number requested\n");
1102 			goto out;
1103 		} else {
1104 			block = block >> 2;
1105 			this_count = this_count >> 2;
1106 		}
1107 	}
1108 	if (sdp->sector_size == 4096) {
1109 		if ((block & 7) || (blk_rq_sectors(rq) & 7)) {
1110 			scmd_printk(KERN_ERR, SCpnt,
1111 				    "Bad block number requested\n");
1112 			goto out;
1113 		} else {
1114 			block = block >> 3;
1115 			this_count = this_count >> 3;
1116 		}
1117 	}
1118 	if (rq_data_dir(rq) == WRITE) {
1119 		SCpnt->cmnd[0] = WRITE_6;
1120 
1121 		if (blk_integrity_rq(rq))
1122 			sd_dif_prepare(SCpnt);
1123 
1124 	} else if (rq_data_dir(rq) == READ) {
1125 		SCpnt->cmnd[0] = READ_6;
1126 	} else {
1127 		scmd_printk(KERN_ERR, SCpnt, "Unknown command %d\n", req_op(rq));
1128 		goto out;
1129 	}
1130 
1131 	SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
1132 					"%s %d/%u 512 byte blocks.\n",
1133 					(rq_data_dir(rq) == WRITE) ?
1134 					"writing" : "reading", this_count,
1135 					blk_rq_sectors(rq)));
1136 
1137 	dix = scsi_prot_sg_count(SCpnt);
1138 	dif = scsi_host_dif_capable(SCpnt->device->host, sdkp->protection_type);
1139 
1140 	if (dif || dix)
1141 		protect = sd_setup_protect_cmnd(SCpnt, dix, dif);
1142 	else
1143 		protect = 0;
1144 
1145 	if (protect && sdkp->protection_type == T10_PI_TYPE2_PROTECTION) {
1146 		SCpnt->cmnd = mempool_alloc(sd_cdb_pool, GFP_ATOMIC);
1147 
1148 		if (unlikely(SCpnt->cmnd == NULL)) {
1149 			ret = BLKPREP_DEFER;
1150 			goto out;
1151 		}
1152 
1153 		SCpnt->cmd_len = SD_EXT_CDB_SIZE;
1154 		memset(SCpnt->cmnd, 0, SCpnt->cmd_len);
1155 		SCpnt->cmnd[0] = VARIABLE_LENGTH_CMD;
1156 		SCpnt->cmnd[7] = 0x18;
1157 		SCpnt->cmnd[9] = (rq_data_dir(rq) == READ) ? READ_32 : WRITE_32;
1158 		SCpnt->cmnd[10] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0);
1159 
1160 		/* LBA */
1161 		SCpnt->cmnd[12] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0;
1162 		SCpnt->cmnd[13] = sizeof(block) > 4 ? (unsigned char) (block >> 48) & 0xff : 0;
1163 		SCpnt->cmnd[14] = sizeof(block) > 4 ? (unsigned char) (block >> 40) & 0xff : 0;
1164 		SCpnt->cmnd[15] = sizeof(block) > 4 ? (unsigned char) (block >> 32) & 0xff : 0;
1165 		SCpnt->cmnd[16] = (unsigned char) (block >> 24) & 0xff;
1166 		SCpnt->cmnd[17] = (unsigned char) (block >> 16) & 0xff;
1167 		SCpnt->cmnd[18] = (unsigned char) (block >> 8) & 0xff;
1168 		SCpnt->cmnd[19] = (unsigned char) block & 0xff;
1169 
1170 		/* Expected Indirect LBA */
1171 		SCpnt->cmnd[20] = (unsigned char) (block >> 24) & 0xff;
1172 		SCpnt->cmnd[21] = (unsigned char) (block >> 16) & 0xff;
1173 		SCpnt->cmnd[22] = (unsigned char) (block >> 8) & 0xff;
1174 		SCpnt->cmnd[23] = (unsigned char) block & 0xff;
1175 
1176 		/* Transfer length */
1177 		SCpnt->cmnd[28] = (unsigned char) (this_count >> 24) & 0xff;
1178 		SCpnt->cmnd[29] = (unsigned char) (this_count >> 16) & 0xff;
1179 		SCpnt->cmnd[30] = (unsigned char) (this_count >> 8) & 0xff;
1180 		SCpnt->cmnd[31] = (unsigned char) this_count & 0xff;
1181 	} else if (sdp->use_16_for_rw || (this_count > 0xffff)) {
1182 		SCpnt->cmnd[0] += READ_16 - READ_6;
1183 		SCpnt->cmnd[1] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0);
1184 		SCpnt->cmnd[2] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0;
1185 		SCpnt->cmnd[3] = sizeof(block) > 4 ? (unsigned char) (block >> 48) & 0xff : 0;
1186 		SCpnt->cmnd[4] = sizeof(block) > 4 ? (unsigned char) (block >> 40) & 0xff : 0;
1187 		SCpnt->cmnd[5] = sizeof(block) > 4 ? (unsigned char) (block >> 32) & 0xff : 0;
1188 		SCpnt->cmnd[6] = (unsigned char) (block >> 24) & 0xff;
1189 		SCpnt->cmnd[7] = (unsigned char) (block >> 16) & 0xff;
1190 		SCpnt->cmnd[8] = (unsigned char) (block >> 8) & 0xff;
1191 		SCpnt->cmnd[9] = (unsigned char) block & 0xff;
1192 		SCpnt->cmnd[10] = (unsigned char) (this_count >> 24) & 0xff;
1193 		SCpnt->cmnd[11] = (unsigned char) (this_count >> 16) & 0xff;
1194 		SCpnt->cmnd[12] = (unsigned char) (this_count >> 8) & 0xff;
1195 		SCpnt->cmnd[13] = (unsigned char) this_count & 0xff;
1196 		SCpnt->cmnd[14] = SCpnt->cmnd[15] = 0;
1197 	} else if ((this_count > 0xff) || (block > 0x1fffff) ||
1198 		   scsi_device_protection(SCpnt->device) ||
1199 		   SCpnt->device->use_10_for_rw) {
1200 		SCpnt->cmnd[0] += READ_10 - READ_6;
1201 		SCpnt->cmnd[1] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0);
1202 		SCpnt->cmnd[2] = (unsigned char) (block >> 24) & 0xff;
1203 		SCpnt->cmnd[3] = (unsigned char) (block >> 16) & 0xff;
1204 		SCpnt->cmnd[4] = (unsigned char) (block >> 8) & 0xff;
1205 		SCpnt->cmnd[5] = (unsigned char) block & 0xff;
1206 		SCpnt->cmnd[6] = SCpnt->cmnd[9] = 0;
1207 		SCpnt->cmnd[7] = (unsigned char) (this_count >> 8) & 0xff;
1208 		SCpnt->cmnd[8] = (unsigned char) this_count & 0xff;
1209 	} else {
1210 		if (unlikely(rq->cmd_flags & REQ_FUA)) {
1211 			/*
1212 			 * This happens only if this drive failed
1213 			 * 10byte rw command with ILLEGAL_REQUEST
1214 			 * during operation and thus turned off
1215 			 * use_10_for_rw.
1216 			 */
1217 			scmd_printk(KERN_ERR, SCpnt,
1218 				    "FUA write on READ/WRITE(6) drive\n");
1219 			goto out;
1220 		}
1221 
1222 		SCpnt->cmnd[1] |= (unsigned char) ((block >> 16) & 0x1f);
1223 		SCpnt->cmnd[2] = (unsigned char) ((block >> 8) & 0xff);
1224 		SCpnt->cmnd[3] = (unsigned char) block & 0xff;
1225 		SCpnt->cmnd[4] = (unsigned char) this_count;
1226 		SCpnt->cmnd[5] = 0;
1227 	}
1228 	SCpnt->sdb.length = this_count * sdp->sector_size;
1229 
1230 	/*
1231 	 * We shouldn't disconnect in the middle of a sector, so with a dumb
1232 	 * host adapter, it's safe to assume that we can at least transfer
1233 	 * this many bytes between each connect / disconnect.
1234 	 */
1235 	SCpnt->transfersize = sdp->sector_size;
1236 	SCpnt->underflow = this_count << 9;
1237 	SCpnt->allowed = SD_MAX_RETRIES;
1238 
1239 	/*
1240 	 * This indicates that the command is ready from our end to be
1241 	 * queued.
1242 	 */
1243 	ret = BLKPREP_OK;
1244  out:
1245 	return ret;
1246 }
1247 
1248 static int sd_init_command(struct scsi_cmnd *cmd)
1249 {
1250 	struct request *rq = cmd->request;
1251 
1252 	switch (req_op(rq)) {
1253 	case REQ_OP_DISCARD:
1254 		switch (scsi_disk(rq->rq_disk)->provisioning_mode) {
1255 		case SD_LBP_UNMAP:
1256 			return sd_setup_unmap_cmnd(cmd);
1257 		case SD_LBP_WS16:
1258 			return sd_setup_write_same16_cmnd(cmd, true);
1259 		case SD_LBP_WS10:
1260 			return sd_setup_write_same10_cmnd(cmd, true);
1261 		case SD_LBP_ZERO:
1262 			return sd_setup_write_same10_cmnd(cmd, false);
1263 		default:
1264 			return BLKPREP_INVALID;
1265 		}
1266 	case REQ_OP_WRITE_ZEROES:
1267 		return sd_setup_write_zeroes_cmnd(cmd);
1268 	case REQ_OP_WRITE_SAME:
1269 		return sd_setup_write_same_cmnd(cmd);
1270 	case REQ_OP_FLUSH:
1271 		return sd_setup_flush_cmnd(cmd);
1272 	case REQ_OP_READ:
1273 	case REQ_OP_WRITE:
1274 		return sd_setup_read_write_cmnd(cmd);
1275 	case REQ_OP_ZONE_REPORT:
1276 		return sd_zbc_setup_report_cmnd(cmd);
1277 	case REQ_OP_ZONE_RESET:
1278 		return sd_zbc_setup_reset_cmnd(cmd);
1279 	default:
1280 		BUG();
1281 	}
1282 }
1283 
1284 static void sd_uninit_command(struct scsi_cmnd *SCpnt)
1285 {
1286 	struct request *rq = SCpnt->request;
1287 	u8 *cmnd;
1288 
1289 	if (rq->rq_flags & RQF_SPECIAL_PAYLOAD)
1290 		__free_page(rq->special_vec.bv_page);
1291 
1292 	if (SCpnt->cmnd != scsi_req(rq)->cmd) {
1293 		cmnd = SCpnt->cmnd;
1294 		SCpnt->cmnd = NULL;
1295 		SCpnt->cmd_len = 0;
1296 		mempool_free(cmnd, sd_cdb_pool);
1297 	}
1298 }
1299 
1300 /**
1301  *	sd_open - open a scsi disk device
1302  *	@bdev: Block device of the scsi disk to open
1303  *	@mode: FMODE_* mask
1304  *
1305  *	Returns 0 if successful. Returns a negated errno value in case
1306  *	of error.
1307  *
1308  *	Note: This can be called from a user context (e.g. fsck(1) )
1309  *	or from within the kernel (e.g. as a result of a mount(1) ).
1310  *	In the latter case @inode and @filp carry an abridged amount
1311  *	of information as noted above.
1312  *
1313  *	Locking: called with bdev->bd_mutex held.
1314  **/
1315 static int sd_open(struct block_device *bdev, fmode_t mode)
1316 {
1317 	struct scsi_disk *sdkp = scsi_disk_get(bdev->bd_disk);
1318 	struct scsi_device *sdev;
1319 	int retval;
1320 
1321 	if (!sdkp)
1322 		return -ENXIO;
1323 
1324 	SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_open\n"));
1325 
1326 	sdev = sdkp->device;
1327 
1328 	/*
1329 	 * If the device is in error recovery, wait until it is done.
1330 	 * If the device is offline, then disallow any access to it.
1331 	 */
1332 	retval = -ENXIO;
1333 	if (!scsi_block_when_processing_errors(sdev))
1334 		goto error_out;
1335 
1336 	if (sdev->removable || sdkp->write_prot)
1337 		check_disk_change(bdev);
1338 
1339 	/*
1340 	 * If the drive is empty, just let the open fail.
1341 	 */
1342 	retval = -ENOMEDIUM;
1343 	if (sdev->removable && !sdkp->media_present && !(mode & FMODE_NDELAY))
1344 		goto error_out;
1345 
1346 	/*
1347 	 * If the device has the write protect tab set, have the open fail
1348 	 * if the user expects to be able to write to the thing.
1349 	 */
1350 	retval = -EROFS;
1351 	if (sdkp->write_prot && (mode & FMODE_WRITE))
1352 		goto error_out;
1353 
1354 	/*
1355 	 * It is possible that the disk changing stuff resulted in
1356 	 * the device being taken offline.  If this is the case,
1357 	 * report this to the user, and don't pretend that the
1358 	 * open actually succeeded.
1359 	 */
1360 	retval = -ENXIO;
1361 	if (!scsi_device_online(sdev))
1362 		goto error_out;
1363 
1364 	if ((atomic_inc_return(&sdkp->openers) == 1) && sdev->removable) {
1365 		if (scsi_block_when_processing_errors(sdev))
1366 			scsi_set_medium_removal(sdev, SCSI_REMOVAL_PREVENT);
1367 	}
1368 
1369 	return 0;
1370 
1371 error_out:
1372 	scsi_disk_put(sdkp);
1373 	return retval;
1374 }
1375 
1376 /**
1377  *	sd_release - invoked when the (last) close(2) is called on this
1378  *	scsi disk.
1379  *	@disk: disk to release
1380  *	@mode: FMODE_* mask
1381  *
1382  *	Returns 0.
1383  *
1384  *	Note: may block (uninterruptible) if error recovery is underway
1385  *	on this disk.
1386  *
1387  *	Locking: called with bdev->bd_mutex held.
1388  **/
1389 static void sd_release(struct gendisk *disk, fmode_t mode)
1390 {
1391 	struct scsi_disk *sdkp = scsi_disk(disk);
1392 	struct scsi_device *sdev = sdkp->device;
1393 
1394 	SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_release\n"));
1395 
1396 	if (atomic_dec_return(&sdkp->openers) == 0 && sdev->removable) {
1397 		if (scsi_block_when_processing_errors(sdev))
1398 			scsi_set_medium_removal(sdev, SCSI_REMOVAL_ALLOW);
1399 	}
1400 
1401 	/*
1402 	 * XXX and what if there are packets in flight and this close()
1403 	 * XXX is followed by a "rmmod sd_mod"?
1404 	 */
1405 
1406 	scsi_disk_put(sdkp);
1407 }
1408 
1409 static int sd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
1410 {
1411 	struct scsi_disk *sdkp = scsi_disk(bdev->bd_disk);
1412 	struct scsi_device *sdp = sdkp->device;
1413 	struct Scsi_Host *host = sdp->host;
1414 	sector_t capacity = logical_to_sectors(sdp, sdkp->capacity);
1415 	int diskinfo[4];
1416 
1417 	/* default to most commonly used values */
1418 	diskinfo[0] = 0x40;	/* 1 << 6 */
1419 	diskinfo[1] = 0x20;	/* 1 << 5 */
1420 	diskinfo[2] = capacity >> 11;
1421 
1422 	/* override with calculated, extended default, or driver values */
1423 	if (host->hostt->bios_param)
1424 		host->hostt->bios_param(sdp, bdev, capacity, diskinfo);
1425 	else
1426 		scsicam_bios_param(bdev, capacity, diskinfo);
1427 
1428 	geo->heads = diskinfo[0];
1429 	geo->sectors = diskinfo[1];
1430 	geo->cylinders = diskinfo[2];
1431 	return 0;
1432 }
1433 
1434 /**
1435  *	sd_ioctl - process an ioctl
1436  *	@bdev: target block device
1437  *	@mode: FMODE_* mask
1438  *	@cmd: ioctl command number
1439  *	@arg: this is third argument given to ioctl(2) system call.
1440  *	Often contains a pointer.
1441  *
1442  *	Returns 0 if successful (some ioctls return positive numbers on
1443  *	success as well). Returns a negated errno value in case of error.
1444  *
1445  *	Note: most ioctls are forward onto the block subsystem or further
1446  *	down in the scsi subsystem.
1447  **/
1448 static int sd_ioctl(struct block_device *bdev, fmode_t mode,
1449 		    unsigned int cmd, unsigned long arg)
1450 {
1451 	struct gendisk *disk = bdev->bd_disk;
1452 	struct scsi_disk *sdkp = scsi_disk(disk);
1453 	struct scsi_device *sdp = sdkp->device;
1454 	void __user *p = (void __user *)arg;
1455 	int error;
1456 
1457 	SCSI_LOG_IOCTL(1, sd_printk(KERN_INFO, sdkp, "sd_ioctl: disk=%s, "
1458 				    "cmd=0x%x\n", disk->disk_name, cmd));
1459 
1460 	error = scsi_verify_blk_ioctl(bdev, cmd);
1461 	if (error < 0)
1462 		return error;
1463 
1464 	/*
1465 	 * If we are in the middle of error recovery, don't let anyone
1466 	 * else try and use this device.  Also, if error recovery fails, it
1467 	 * may try and take the device offline, in which case all further
1468 	 * access to the device is prohibited.
1469 	 */
1470 	error = scsi_ioctl_block_when_processing_errors(sdp, cmd,
1471 			(mode & FMODE_NDELAY) != 0);
1472 	if (error)
1473 		goto out;
1474 
1475 	if (is_sed_ioctl(cmd))
1476 		return sed_ioctl(sdkp->opal_dev, cmd, p);
1477 
1478 	/*
1479 	 * Send SCSI addressing ioctls directly to mid level, send other
1480 	 * ioctls to block level and then onto mid level if they can't be
1481 	 * resolved.
1482 	 */
1483 	switch (cmd) {
1484 		case SCSI_IOCTL_GET_IDLUN:
1485 		case SCSI_IOCTL_GET_BUS_NUMBER:
1486 			error = scsi_ioctl(sdp, cmd, p);
1487 			break;
1488 		default:
1489 			error = scsi_cmd_blk_ioctl(bdev, mode, cmd, p);
1490 			if (error != -ENOTTY)
1491 				break;
1492 			error = scsi_ioctl(sdp, cmd, p);
1493 			break;
1494 	}
1495 out:
1496 	return error;
1497 }
1498 
1499 static void set_media_not_present(struct scsi_disk *sdkp)
1500 {
1501 	if (sdkp->media_present)
1502 		sdkp->device->changed = 1;
1503 
1504 	if (sdkp->device->removable) {
1505 		sdkp->media_present = 0;
1506 		sdkp->capacity = 0;
1507 	}
1508 }
1509 
1510 static int media_not_present(struct scsi_disk *sdkp,
1511 			     struct scsi_sense_hdr *sshdr)
1512 {
1513 	if (!scsi_sense_valid(sshdr))
1514 		return 0;
1515 
1516 	/* not invoked for commands that could return deferred errors */
1517 	switch (sshdr->sense_key) {
1518 	case UNIT_ATTENTION:
1519 	case NOT_READY:
1520 		/* medium not present */
1521 		if (sshdr->asc == 0x3A) {
1522 			set_media_not_present(sdkp);
1523 			return 1;
1524 		}
1525 	}
1526 	return 0;
1527 }
1528 
1529 /**
1530  *	sd_check_events - check media events
1531  *	@disk: kernel device descriptor
1532  *	@clearing: disk events currently being cleared
1533  *
1534  *	Returns mask of DISK_EVENT_*.
1535  *
1536  *	Note: this function is invoked from the block subsystem.
1537  **/
1538 static unsigned int sd_check_events(struct gendisk *disk, unsigned int clearing)
1539 {
1540 	struct scsi_disk *sdkp = scsi_disk_get(disk);
1541 	struct scsi_device *sdp;
1542 	int retval;
1543 
1544 	if (!sdkp)
1545 		return 0;
1546 
1547 	sdp = sdkp->device;
1548 	SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_check_events\n"));
1549 
1550 	/*
1551 	 * If the device is offline, don't send any commands - just pretend as
1552 	 * if the command failed.  If the device ever comes back online, we
1553 	 * can deal with it then.  It is only because of unrecoverable errors
1554 	 * that we would ever take a device offline in the first place.
1555 	 */
1556 	if (!scsi_device_online(sdp)) {
1557 		set_media_not_present(sdkp);
1558 		goto out;
1559 	}
1560 
1561 	/*
1562 	 * Using TEST_UNIT_READY enables differentiation between drive with
1563 	 * no cartridge loaded - NOT READY, drive with changed cartridge -
1564 	 * UNIT ATTENTION, or with same cartridge - GOOD STATUS.
1565 	 *
1566 	 * Drives that auto spin down. eg iomega jaz 1G, will be started
1567 	 * by sd_spinup_disk() from sd_revalidate_disk(), which happens whenever
1568 	 * sd_revalidate() is called.
1569 	 */
1570 	if (scsi_block_when_processing_errors(sdp)) {
1571 		struct scsi_sense_hdr sshdr = { 0, };
1572 
1573 		retval = scsi_test_unit_ready(sdp, SD_TIMEOUT, SD_MAX_RETRIES,
1574 					      &sshdr);
1575 
1576 		/* failed to execute TUR, assume media not present */
1577 		if (host_byte(retval)) {
1578 			set_media_not_present(sdkp);
1579 			goto out;
1580 		}
1581 
1582 		if (media_not_present(sdkp, &sshdr))
1583 			goto out;
1584 	}
1585 
1586 	/*
1587 	 * For removable scsi disk we have to recognise the presence
1588 	 * of a disk in the drive.
1589 	 */
1590 	if (!sdkp->media_present)
1591 		sdp->changed = 1;
1592 	sdkp->media_present = 1;
1593 out:
1594 	/*
1595 	 * sdp->changed is set under the following conditions:
1596 	 *
1597 	 *	Medium present state has changed in either direction.
1598 	 *	Device has indicated UNIT_ATTENTION.
1599 	 */
1600 	retval = sdp->changed ? DISK_EVENT_MEDIA_CHANGE : 0;
1601 	sdp->changed = 0;
1602 	scsi_disk_put(sdkp);
1603 	return retval;
1604 }
1605 
1606 static int sd_sync_cache(struct scsi_disk *sdkp, struct scsi_sense_hdr *sshdr)
1607 {
1608 	int retries, res;
1609 	struct scsi_device *sdp = sdkp->device;
1610 	const int timeout = sdp->request_queue->rq_timeout
1611 		* SD_FLUSH_TIMEOUT_MULTIPLIER;
1612 	struct scsi_sense_hdr my_sshdr;
1613 
1614 	if (!scsi_device_online(sdp))
1615 		return -ENODEV;
1616 
1617 	/* caller might not be interested in sense, but we need it */
1618 	if (!sshdr)
1619 		sshdr = &my_sshdr;
1620 
1621 	for (retries = 3; retries > 0; --retries) {
1622 		unsigned char cmd[10] = { 0 };
1623 
1624 		cmd[0] = SYNCHRONIZE_CACHE;
1625 		/*
1626 		 * Leave the rest of the command zero to indicate
1627 		 * flush everything.
1628 		 */
1629 		res = scsi_execute(sdp, cmd, DMA_NONE, NULL, 0, NULL, sshdr,
1630 				timeout, SD_MAX_RETRIES, 0, RQF_PM, NULL);
1631 		if (res == 0)
1632 			break;
1633 	}
1634 
1635 	if (res) {
1636 		sd_print_result(sdkp, "Synchronize Cache(10) failed", res);
1637 
1638 		if (driver_byte(res) & DRIVER_SENSE)
1639 			sd_print_sense_hdr(sdkp, sshdr);
1640 
1641 		/* we need to evaluate the error return  */
1642 		if (scsi_sense_valid(sshdr) &&
1643 			(sshdr->asc == 0x3a ||	/* medium not present */
1644 			 sshdr->asc == 0x20))	/* invalid command */
1645 				/* this is no error here */
1646 				return 0;
1647 
1648 		switch (host_byte(res)) {
1649 		/* ignore errors due to racing a disconnection */
1650 		case DID_BAD_TARGET:
1651 		case DID_NO_CONNECT:
1652 			return 0;
1653 		/* signal the upper layer it might try again */
1654 		case DID_BUS_BUSY:
1655 		case DID_IMM_RETRY:
1656 		case DID_REQUEUE:
1657 		case DID_SOFT_ERROR:
1658 			return -EBUSY;
1659 		default:
1660 			return -EIO;
1661 		}
1662 	}
1663 	return 0;
1664 }
1665 
1666 static void sd_rescan(struct device *dev)
1667 {
1668 	struct scsi_disk *sdkp = dev_get_drvdata(dev);
1669 
1670 	revalidate_disk(sdkp->disk);
1671 }
1672 
1673 
1674 #ifdef CONFIG_COMPAT
1675 /*
1676  * This gets directly called from VFS. When the ioctl
1677  * is not recognized we go back to the other translation paths.
1678  */
1679 static int sd_compat_ioctl(struct block_device *bdev, fmode_t mode,
1680 			   unsigned int cmd, unsigned long arg)
1681 {
1682 	struct scsi_device *sdev = scsi_disk(bdev->bd_disk)->device;
1683 	int error;
1684 
1685 	error = scsi_ioctl_block_when_processing_errors(sdev, cmd,
1686 			(mode & FMODE_NDELAY) != 0);
1687 	if (error)
1688 		return error;
1689 
1690 	/*
1691 	 * Let the static ioctl translation table take care of it.
1692 	 */
1693 	if (!sdev->host->hostt->compat_ioctl)
1694 		return -ENOIOCTLCMD;
1695 	return sdev->host->hostt->compat_ioctl(sdev, cmd, (void __user *)arg);
1696 }
1697 #endif
1698 
1699 static char sd_pr_type(enum pr_type type)
1700 {
1701 	switch (type) {
1702 	case PR_WRITE_EXCLUSIVE:
1703 		return 0x01;
1704 	case PR_EXCLUSIVE_ACCESS:
1705 		return 0x03;
1706 	case PR_WRITE_EXCLUSIVE_REG_ONLY:
1707 		return 0x05;
1708 	case PR_EXCLUSIVE_ACCESS_REG_ONLY:
1709 		return 0x06;
1710 	case PR_WRITE_EXCLUSIVE_ALL_REGS:
1711 		return 0x07;
1712 	case PR_EXCLUSIVE_ACCESS_ALL_REGS:
1713 		return 0x08;
1714 	default:
1715 		return 0;
1716 	}
1717 };
1718 
1719 static int sd_pr_command(struct block_device *bdev, u8 sa,
1720 		u64 key, u64 sa_key, u8 type, u8 flags)
1721 {
1722 	struct scsi_device *sdev = scsi_disk(bdev->bd_disk)->device;
1723 	struct scsi_sense_hdr sshdr;
1724 	int result;
1725 	u8 cmd[16] = { 0, };
1726 	u8 data[24] = { 0, };
1727 
1728 	cmd[0] = PERSISTENT_RESERVE_OUT;
1729 	cmd[1] = sa;
1730 	cmd[2] = type;
1731 	put_unaligned_be32(sizeof(data), &cmd[5]);
1732 
1733 	put_unaligned_be64(key, &data[0]);
1734 	put_unaligned_be64(sa_key, &data[8]);
1735 	data[20] = flags;
1736 
1737 	result = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, &data, sizeof(data),
1738 			&sshdr, SD_TIMEOUT, SD_MAX_RETRIES, NULL);
1739 
1740 	if ((driver_byte(result) & DRIVER_SENSE) &&
1741 	    (scsi_sense_valid(&sshdr))) {
1742 		sdev_printk(KERN_INFO, sdev, "PR command failed: %d\n", result);
1743 		scsi_print_sense_hdr(sdev, NULL, &sshdr);
1744 	}
1745 
1746 	return result;
1747 }
1748 
1749 static int sd_pr_register(struct block_device *bdev, u64 old_key, u64 new_key,
1750 		u32 flags)
1751 {
1752 	if (flags & ~PR_FL_IGNORE_KEY)
1753 		return -EOPNOTSUPP;
1754 	return sd_pr_command(bdev, (flags & PR_FL_IGNORE_KEY) ? 0x06 : 0x00,
1755 			old_key, new_key, 0,
1756 			(1 << 0) /* APTPL */);
1757 }
1758 
1759 static int sd_pr_reserve(struct block_device *bdev, u64 key, enum pr_type type,
1760 		u32 flags)
1761 {
1762 	if (flags)
1763 		return -EOPNOTSUPP;
1764 	return sd_pr_command(bdev, 0x01, key, 0, sd_pr_type(type), 0);
1765 }
1766 
1767 static int sd_pr_release(struct block_device *bdev, u64 key, enum pr_type type)
1768 {
1769 	return sd_pr_command(bdev, 0x02, key, 0, sd_pr_type(type), 0);
1770 }
1771 
1772 static int sd_pr_preempt(struct block_device *bdev, u64 old_key, u64 new_key,
1773 		enum pr_type type, bool abort)
1774 {
1775 	return sd_pr_command(bdev, abort ? 0x05 : 0x04, old_key, new_key,
1776 			     sd_pr_type(type), 0);
1777 }
1778 
1779 static int sd_pr_clear(struct block_device *bdev, u64 key)
1780 {
1781 	return sd_pr_command(bdev, 0x03, key, 0, 0, 0);
1782 }
1783 
1784 static const struct pr_ops sd_pr_ops = {
1785 	.pr_register	= sd_pr_register,
1786 	.pr_reserve	= sd_pr_reserve,
1787 	.pr_release	= sd_pr_release,
1788 	.pr_preempt	= sd_pr_preempt,
1789 	.pr_clear	= sd_pr_clear,
1790 };
1791 
1792 static const struct block_device_operations sd_fops = {
1793 	.owner			= THIS_MODULE,
1794 	.open			= sd_open,
1795 	.release		= sd_release,
1796 	.ioctl			= sd_ioctl,
1797 	.getgeo			= sd_getgeo,
1798 #ifdef CONFIG_COMPAT
1799 	.compat_ioctl		= sd_compat_ioctl,
1800 #endif
1801 	.check_events		= sd_check_events,
1802 	.revalidate_disk	= sd_revalidate_disk,
1803 	.unlock_native_capacity	= sd_unlock_native_capacity,
1804 	.pr_ops			= &sd_pr_ops,
1805 };
1806 
1807 /**
1808  *	sd_eh_reset - reset error handling callback
1809  *	@scmd:		sd-issued command that has failed
1810  *
1811  *	This function is called by the SCSI midlayer before starting
1812  *	SCSI EH. When counting medium access failures we have to be
1813  *	careful to register it only only once per device and SCSI EH run;
1814  *	there might be several timed out commands which will cause the
1815  *	'max_medium_access_timeouts' counter to trigger after the first
1816  *	SCSI EH run already and set the device to offline.
1817  *	So this function resets the internal counter before starting SCSI EH.
1818  **/
1819 static void sd_eh_reset(struct scsi_cmnd *scmd)
1820 {
1821 	struct scsi_disk *sdkp = scsi_disk(scmd->request->rq_disk);
1822 
1823 	/* New SCSI EH run, reset gate variable */
1824 	sdkp->ignore_medium_access_errors = false;
1825 }
1826 
1827 /**
1828  *	sd_eh_action - error handling callback
1829  *	@scmd:		sd-issued command that has failed
1830  *	@eh_disp:	The recovery disposition suggested by the midlayer
1831  *
1832  *	This function is called by the SCSI midlayer upon completion of an
1833  *	error test command (currently TEST UNIT READY). The result of sending
1834  *	the eh command is passed in eh_disp.  We're looking for devices that
1835  *	fail medium access commands but are OK with non access commands like
1836  *	test unit ready (so wrongly see the device as having a successful
1837  *	recovery)
1838  **/
1839 static int sd_eh_action(struct scsi_cmnd *scmd, int eh_disp)
1840 {
1841 	struct scsi_disk *sdkp = scsi_disk(scmd->request->rq_disk);
1842 	struct scsi_device *sdev = scmd->device;
1843 
1844 	if (!scsi_device_online(sdev) ||
1845 	    !scsi_medium_access_command(scmd) ||
1846 	    host_byte(scmd->result) != DID_TIME_OUT ||
1847 	    eh_disp != SUCCESS)
1848 		return eh_disp;
1849 
1850 	/*
1851 	 * The device has timed out executing a medium access command.
1852 	 * However, the TEST UNIT READY command sent during error
1853 	 * handling completed successfully. Either the device is in the
1854 	 * process of recovering or has it suffered an internal failure
1855 	 * that prevents access to the storage medium.
1856 	 */
1857 	if (!sdkp->ignore_medium_access_errors) {
1858 		sdkp->medium_access_timed_out++;
1859 		sdkp->ignore_medium_access_errors = true;
1860 	}
1861 
1862 	/*
1863 	 * If the device keeps failing read/write commands but TEST UNIT
1864 	 * READY always completes successfully we assume that medium
1865 	 * access is no longer possible and take the device offline.
1866 	 */
1867 	if (sdkp->medium_access_timed_out >= sdkp->max_medium_access_timeouts) {
1868 		scmd_printk(KERN_ERR, scmd,
1869 			    "Medium access timeout failure. Offlining disk!\n");
1870 		mutex_lock(&sdev->state_mutex);
1871 		scsi_device_set_state(sdev, SDEV_OFFLINE);
1872 		mutex_unlock(&sdev->state_mutex);
1873 
1874 		return SUCCESS;
1875 	}
1876 
1877 	return eh_disp;
1878 }
1879 
1880 static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd)
1881 {
1882 	struct request *req = scmd->request;
1883 	struct scsi_device *sdev = scmd->device;
1884 	unsigned int transferred, good_bytes;
1885 	u64 start_lba, end_lba, bad_lba;
1886 
1887 	/*
1888 	 * Some commands have a payload smaller than the device logical
1889 	 * block size (e.g. INQUIRY on a 4K disk).
1890 	 */
1891 	if (scsi_bufflen(scmd) <= sdev->sector_size)
1892 		return 0;
1893 
1894 	/* Check if we have a 'bad_lba' information */
1895 	if (!scsi_get_sense_info_fld(scmd->sense_buffer,
1896 				     SCSI_SENSE_BUFFERSIZE,
1897 				     &bad_lba))
1898 		return 0;
1899 
1900 	/*
1901 	 * If the bad lba was reported incorrectly, we have no idea where
1902 	 * the error is.
1903 	 */
1904 	start_lba = sectors_to_logical(sdev, blk_rq_pos(req));
1905 	end_lba = start_lba + bytes_to_logical(sdev, scsi_bufflen(scmd));
1906 	if (bad_lba < start_lba || bad_lba >= end_lba)
1907 		return 0;
1908 
1909 	/*
1910 	 * resid is optional but mostly filled in.  When it's unused,
1911 	 * its value is zero, so we assume the whole buffer transferred
1912 	 */
1913 	transferred = scsi_bufflen(scmd) - scsi_get_resid(scmd);
1914 
1915 	/* This computation should always be done in terms of the
1916 	 * resolution of the device's medium.
1917 	 */
1918 	good_bytes = logical_to_bytes(sdev, bad_lba - start_lba);
1919 
1920 	return min(good_bytes, transferred);
1921 }
1922 
1923 /**
1924  *	sd_done - bottom half handler: called when the lower level
1925  *	driver has completed (successfully or otherwise) a scsi command.
1926  *	@SCpnt: mid-level's per command structure.
1927  *
1928  *	Note: potentially run from within an ISR. Must not block.
1929  **/
1930 static int sd_done(struct scsi_cmnd *SCpnt)
1931 {
1932 	int result = SCpnt->result;
1933 	unsigned int good_bytes = result ? 0 : scsi_bufflen(SCpnt);
1934 	unsigned int sector_size = SCpnt->device->sector_size;
1935 	unsigned int resid;
1936 	struct scsi_sense_hdr sshdr;
1937 	struct scsi_disk *sdkp = scsi_disk(SCpnt->request->rq_disk);
1938 	struct request *req = SCpnt->request;
1939 	int sense_valid = 0;
1940 	int sense_deferred = 0;
1941 
1942 	switch (req_op(req)) {
1943 	case REQ_OP_DISCARD:
1944 	case REQ_OP_WRITE_ZEROES:
1945 	case REQ_OP_WRITE_SAME:
1946 	case REQ_OP_ZONE_RESET:
1947 		if (!result) {
1948 			good_bytes = blk_rq_bytes(req);
1949 			scsi_set_resid(SCpnt, 0);
1950 		} else {
1951 			good_bytes = 0;
1952 			scsi_set_resid(SCpnt, blk_rq_bytes(req));
1953 		}
1954 		break;
1955 	case REQ_OP_ZONE_REPORT:
1956 		if (!result) {
1957 			good_bytes = scsi_bufflen(SCpnt)
1958 				- scsi_get_resid(SCpnt);
1959 			scsi_set_resid(SCpnt, 0);
1960 		} else {
1961 			good_bytes = 0;
1962 			scsi_set_resid(SCpnt, blk_rq_bytes(req));
1963 		}
1964 		break;
1965 	default:
1966 		/*
1967 		 * In case of bogus fw or device, we could end up having
1968 		 * an unaligned partial completion. Check this here and force
1969 		 * alignment.
1970 		 */
1971 		resid = scsi_get_resid(SCpnt);
1972 		if (resid & (sector_size - 1)) {
1973 			sd_printk(KERN_INFO, sdkp,
1974 				"Unaligned partial completion (resid=%u, sector_sz=%u)\n",
1975 				resid, sector_size);
1976 			resid = min(scsi_bufflen(SCpnt),
1977 				    round_up(resid, sector_size));
1978 			scsi_set_resid(SCpnt, resid);
1979 		}
1980 	}
1981 
1982 	if (result) {
1983 		sense_valid = scsi_command_normalize_sense(SCpnt, &sshdr);
1984 		if (sense_valid)
1985 			sense_deferred = scsi_sense_is_deferred(&sshdr);
1986 	}
1987 	sdkp->medium_access_timed_out = 0;
1988 
1989 	if (driver_byte(result) != DRIVER_SENSE &&
1990 	    (!sense_valid || sense_deferred))
1991 		goto out;
1992 
1993 	switch (sshdr.sense_key) {
1994 	case HARDWARE_ERROR:
1995 	case MEDIUM_ERROR:
1996 		good_bytes = sd_completed_bytes(SCpnt);
1997 		break;
1998 	case RECOVERED_ERROR:
1999 		good_bytes = scsi_bufflen(SCpnt);
2000 		break;
2001 	case NO_SENSE:
2002 		/* This indicates a false check condition, so ignore it.  An
2003 		 * unknown amount of data was transferred so treat it as an
2004 		 * error.
2005 		 */
2006 		SCpnt->result = 0;
2007 		memset(SCpnt->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
2008 		break;
2009 	case ABORTED_COMMAND:
2010 		if (sshdr.asc == 0x10)  /* DIF: Target detected corruption */
2011 			good_bytes = sd_completed_bytes(SCpnt);
2012 		break;
2013 	case ILLEGAL_REQUEST:
2014 		switch (sshdr.asc) {
2015 		case 0x10:	/* DIX: Host detected corruption */
2016 			good_bytes = sd_completed_bytes(SCpnt);
2017 			break;
2018 		case 0x20:	/* INVALID COMMAND OPCODE */
2019 		case 0x24:	/* INVALID FIELD IN CDB */
2020 			switch (SCpnt->cmnd[0]) {
2021 			case UNMAP:
2022 				sd_config_discard(sdkp, SD_LBP_DISABLE);
2023 				break;
2024 			case WRITE_SAME_16:
2025 			case WRITE_SAME:
2026 				if (SCpnt->cmnd[1] & 8) { /* UNMAP */
2027 					sd_config_discard(sdkp, SD_LBP_DISABLE);
2028 				} else {
2029 					sdkp->device->no_write_same = 1;
2030 					sd_config_write_same(sdkp);
2031 					req->__data_len = blk_rq_bytes(req);
2032 					req->rq_flags |= RQF_QUIET;
2033 				}
2034 				break;
2035 			}
2036 		}
2037 		break;
2038 	default:
2039 		break;
2040 	}
2041 
2042  out:
2043 	if (sd_is_zoned(sdkp))
2044 		sd_zbc_complete(SCpnt, good_bytes, &sshdr);
2045 
2046 	SCSI_LOG_HLCOMPLETE(1, scmd_printk(KERN_INFO, SCpnt,
2047 					   "sd_done: completed %d of %d bytes\n",
2048 					   good_bytes, scsi_bufflen(SCpnt)));
2049 
2050 	if (rq_data_dir(SCpnt->request) == READ && scsi_prot_sg_count(SCpnt))
2051 		sd_dif_complete(SCpnt, good_bytes);
2052 
2053 	return good_bytes;
2054 }
2055 
2056 /*
2057  * spinup disk - called only in sd_revalidate_disk()
2058  */
2059 static void
2060 sd_spinup_disk(struct scsi_disk *sdkp)
2061 {
2062 	unsigned char cmd[10];
2063 	unsigned long spintime_expire = 0;
2064 	int retries, spintime;
2065 	unsigned int the_result;
2066 	struct scsi_sense_hdr sshdr;
2067 	int sense_valid = 0;
2068 
2069 	spintime = 0;
2070 
2071 	/* Spin up drives, as required.  Only do this at boot time */
2072 	/* Spinup needs to be done for module loads too. */
2073 	do {
2074 		retries = 0;
2075 
2076 		do {
2077 			cmd[0] = TEST_UNIT_READY;
2078 			memset((void *) &cmd[1], 0, 9);
2079 
2080 			the_result = scsi_execute_req(sdkp->device, cmd,
2081 						      DMA_NONE, NULL, 0,
2082 						      &sshdr, SD_TIMEOUT,
2083 						      SD_MAX_RETRIES, NULL);
2084 
2085 			/*
2086 			 * If the drive has indicated to us that it
2087 			 * doesn't have any media in it, don't bother
2088 			 * with any more polling.
2089 			 */
2090 			if (media_not_present(sdkp, &sshdr))
2091 				return;
2092 
2093 			if (the_result)
2094 				sense_valid = scsi_sense_valid(&sshdr);
2095 			retries++;
2096 		} while (retries < 3 &&
2097 			 (!scsi_status_is_good(the_result) ||
2098 			  ((driver_byte(the_result) & DRIVER_SENSE) &&
2099 			  sense_valid && sshdr.sense_key == UNIT_ATTENTION)));
2100 
2101 		if ((driver_byte(the_result) & DRIVER_SENSE) == 0) {
2102 			/* no sense, TUR either succeeded or failed
2103 			 * with a status error */
2104 			if(!spintime && !scsi_status_is_good(the_result)) {
2105 				sd_print_result(sdkp, "Test Unit Ready failed",
2106 						the_result);
2107 			}
2108 			break;
2109 		}
2110 
2111 		/*
2112 		 * The device does not want the automatic start to be issued.
2113 		 */
2114 		if (sdkp->device->no_start_on_add)
2115 			break;
2116 
2117 		if (sense_valid && sshdr.sense_key == NOT_READY) {
2118 			if (sshdr.asc == 4 && sshdr.ascq == 3)
2119 				break;	/* manual intervention required */
2120 			if (sshdr.asc == 4 && sshdr.ascq == 0xb)
2121 				break;	/* standby */
2122 			if (sshdr.asc == 4 && sshdr.ascq == 0xc)
2123 				break;	/* unavailable */
2124 			if (sshdr.asc == 4 && sshdr.ascq == 0x1b)
2125 				break;	/* sanitize in progress */
2126 			/*
2127 			 * Issue command to spin up drive when not ready
2128 			 */
2129 			if (!spintime) {
2130 				sd_printk(KERN_NOTICE, sdkp, "Spinning up disk...");
2131 				cmd[0] = START_STOP;
2132 				cmd[1] = 1;	/* Return immediately */
2133 				memset((void *) &cmd[2], 0, 8);
2134 				cmd[4] = 1;	/* Start spin cycle */
2135 				if (sdkp->device->start_stop_pwr_cond)
2136 					cmd[4] |= 1 << 4;
2137 				scsi_execute_req(sdkp->device, cmd, DMA_NONE,
2138 						 NULL, 0, &sshdr,
2139 						 SD_TIMEOUT, SD_MAX_RETRIES,
2140 						 NULL);
2141 				spintime_expire = jiffies + 100 * HZ;
2142 				spintime = 1;
2143 			}
2144 			/* Wait 1 second for next try */
2145 			msleep(1000);
2146 			printk(KERN_CONT ".");
2147 
2148 		/*
2149 		 * Wait for USB flash devices with slow firmware.
2150 		 * Yes, this sense key/ASC combination shouldn't
2151 		 * occur here.  It's characteristic of these devices.
2152 		 */
2153 		} else if (sense_valid &&
2154 				sshdr.sense_key == UNIT_ATTENTION &&
2155 				sshdr.asc == 0x28) {
2156 			if (!spintime) {
2157 				spintime_expire = jiffies + 5 * HZ;
2158 				spintime = 1;
2159 			}
2160 			/* Wait 1 second for next try */
2161 			msleep(1000);
2162 		} else {
2163 			/* we don't understand the sense code, so it's
2164 			 * probably pointless to loop */
2165 			if(!spintime) {
2166 				sd_printk(KERN_NOTICE, sdkp, "Unit Not Ready\n");
2167 				sd_print_sense_hdr(sdkp, &sshdr);
2168 			}
2169 			break;
2170 		}
2171 
2172 	} while (spintime && time_before_eq(jiffies, spintime_expire));
2173 
2174 	if (spintime) {
2175 		if (scsi_status_is_good(the_result))
2176 			printk(KERN_CONT "ready\n");
2177 		else
2178 			printk(KERN_CONT "not responding...\n");
2179 	}
2180 }
2181 
2182 /*
2183  * Determine whether disk supports Data Integrity Field.
2184  */
2185 static int sd_read_protection_type(struct scsi_disk *sdkp, unsigned char *buffer)
2186 {
2187 	struct scsi_device *sdp = sdkp->device;
2188 	u8 type;
2189 	int ret = 0;
2190 
2191 	if (scsi_device_protection(sdp) == 0 || (buffer[12] & 1) == 0)
2192 		return ret;
2193 
2194 	type = ((buffer[12] >> 1) & 7) + 1; /* P_TYPE 0 = Type 1 */
2195 
2196 	if (type > T10_PI_TYPE3_PROTECTION)
2197 		ret = -ENODEV;
2198 	else if (scsi_host_dif_capable(sdp->host, type))
2199 		ret = 1;
2200 
2201 	if (sdkp->first_scan || type != sdkp->protection_type)
2202 		switch (ret) {
2203 		case -ENODEV:
2204 			sd_printk(KERN_ERR, sdkp, "formatted with unsupported" \
2205 				  " protection type %u. Disabling disk!\n",
2206 				  type);
2207 			break;
2208 		case 1:
2209 			sd_printk(KERN_NOTICE, sdkp,
2210 				  "Enabling DIF Type %u protection\n", type);
2211 			break;
2212 		case 0:
2213 			sd_printk(KERN_NOTICE, sdkp,
2214 				  "Disabling DIF Type %u protection\n", type);
2215 			break;
2216 		}
2217 
2218 	sdkp->protection_type = type;
2219 
2220 	return ret;
2221 }
2222 
2223 static void read_capacity_error(struct scsi_disk *sdkp, struct scsi_device *sdp,
2224 			struct scsi_sense_hdr *sshdr, int sense_valid,
2225 			int the_result)
2226 {
2227 	if (driver_byte(the_result) & DRIVER_SENSE)
2228 		sd_print_sense_hdr(sdkp, sshdr);
2229 	else
2230 		sd_printk(KERN_NOTICE, sdkp, "Sense not available.\n");
2231 
2232 	/*
2233 	 * Set dirty bit for removable devices if not ready -
2234 	 * sometimes drives will not report this properly.
2235 	 */
2236 	if (sdp->removable &&
2237 	    sense_valid && sshdr->sense_key == NOT_READY)
2238 		set_media_not_present(sdkp);
2239 
2240 	/*
2241 	 * We used to set media_present to 0 here to indicate no media
2242 	 * in the drive, but some drives fail read capacity even with
2243 	 * media present, so we can't do that.
2244 	 */
2245 	sdkp->capacity = 0; /* unknown mapped to zero - as usual */
2246 }
2247 
2248 #define RC16_LEN 32
2249 #if RC16_LEN > SD_BUF_SIZE
2250 #error RC16_LEN must not be more than SD_BUF_SIZE
2251 #endif
2252 
2253 #define READ_CAPACITY_RETRIES_ON_RESET	10
2254 
2255 /*
2256  * Ensure that we don't overflow sector_t when CONFIG_LBDAF is not set
2257  * and the reported logical block size is bigger than 512 bytes. Note
2258  * that last_sector is a u64 and therefore logical_to_sectors() is not
2259  * applicable.
2260  */
2261 static bool sd_addressable_capacity(u64 lba, unsigned int sector_size)
2262 {
2263 	u64 last_sector = (lba + 1ULL) << (ilog2(sector_size) - 9);
2264 
2265 	if (sizeof(sector_t) == 4 && last_sector > U32_MAX)
2266 		return false;
2267 
2268 	return true;
2269 }
2270 
2271 static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp,
2272 						unsigned char *buffer)
2273 {
2274 	unsigned char cmd[16];
2275 	struct scsi_sense_hdr sshdr;
2276 	int sense_valid = 0;
2277 	int the_result;
2278 	int retries = 3, reset_retries = READ_CAPACITY_RETRIES_ON_RESET;
2279 	unsigned int alignment;
2280 	unsigned long long lba;
2281 	unsigned sector_size;
2282 
2283 	if (sdp->no_read_capacity_16)
2284 		return -EINVAL;
2285 
2286 	do {
2287 		memset(cmd, 0, 16);
2288 		cmd[0] = SERVICE_ACTION_IN_16;
2289 		cmd[1] = SAI_READ_CAPACITY_16;
2290 		cmd[13] = RC16_LEN;
2291 		memset(buffer, 0, RC16_LEN);
2292 
2293 		the_result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE,
2294 					buffer, RC16_LEN, &sshdr,
2295 					SD_TIMEOUT, SD_MAX_RETRIES, NULL);
2296 
2297 		if (media_not_present(sdkp, &sshdr))
2298 			return -ENODEV;
2299 
2300 		if (the_result) {
2301 			sense_valid = scsi_sense_valid(&sshdr);
2302 			if (sense_valid &&
2303 			    sshdr.sense_key == ILLEGAL_REQUEST &&
2304 			    (sshdr.asc == 0x20 || sshdr.asc == 0x24) &&
2305 			    sshdr.ascq == 0x00)
2306 				/* Invalid Command Operation Code or
2307 				 * Invalid Field in CDB, just retry
2308 				 * silently with RC10 */
2309 				return -EINVAL;
2310 			if (sense_valid &&
2311 			    sshdr.sense_key == UNIT_ATTENTION &&
2312 			    sshdr.asc == 0x29 && sshdr.ascq == 0x00)
2313 				/* Device reset might occur several times,
2314 				 * give it one more chance */
2315 				if (--reset_retries > 0)
2316 					continue;
2317 		}
2318 		retries--;
2319 
2320 	} while (the_result && retries);
2321 
2322 	if (the_result) {
2323 		sd_print_result(sdkp, "Read Capacity(16) failed", the_result);
2324 		read_capacity_error(sdkp, sdp, &sshdr, sense_valid, the_result);
2325 		return -EINVAL;
2326 	}
2327 
2328 	sector_size = get_unaligned_be32(&buffer[8]);
2329 	lba = get_unaligned_be64(&buffer[0]);
2330 
2331 	if (sd_read_protection_type(sdkp, buffer) < 0) {
2332 		sdkp->capacity = 0;
2333 		return -ENODEV;
2334 	}
2335 
2336 	if (!sd_addressable_capacity(lba, sector_size)) {
2337 		sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a "
2338 			"kernel compiled with support for large block "
2339 			"devices.\n");
2340 		sdkp->capacity = 0;
2341 		return -EOVERFLOW;
2342 	}
2343 
2344 	/* Logical blocks per physical block exponent */
2345 	sdkp->physical_block_size = (1 << (buffer[13] & 0xf)) * sector_size;
2346 
2347 	/* RC basis */
2348 	sdkp->rc_basis = (buffer[12] >> 4) & 0x3;
2349 
2350 	/* Lowest aligned logical block */
2351 	alignment = ((buffer[14] & 0x3f) << 8 | buffer[15]) * sector_size;
2352 	blk_queue_alignment_offset(sdp->request_queue, alignment);
2353 	if (alignment && sdkp->first_scan)
2354 		sd_printk(KERN_NOTICE, sdkp,
2355 			  "physical block alignment offset: %u\n", alignment);
2356 
2357 	if (buffer[14] & 0x80) { /* LBPME */
2358 		sdkp->lbpme = 1;
2359 
2360 		if (buffer[14] & 0x40) /* LBPRZ */
2361 			sdkp->lbprz = 1;
2362 
2363 		sd_config_discard(sdkp, SD_LBP_WS16);
2364 	}
2365 
2366 	sdkp->capacity = lba + 1;
2367 	return sector_size;
2368 }
2369 
2370 static int read_capacity_10(struct scsi_disk *sdkp, struct scsi_device *sdp,
2371 						unsigned char *buffer)
2372 {
2373 	unsigned char cmd[16];
2374 	struct scsi_sense_hdr sshdr;
2375 	int sense_valid = 0;
2376 	int the_result;
2377 	int retries = 3, reset_retries = READ_CAPACITY_RETRIES_ON_RESET;
2378 	sector_t lba;
2379 	unsigned sector_size;
2380 
2381 	do {
2382 		cmd[0] = READ_CAPACITY;
2383 		memset(&cmd[1], 0, 9);
2384 		memset(buffer, 0, 8);
2385 
2386 		the_result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE,
2387 					buffer, 8, &sshdr,
2388 					SD_TIMEOUT, SD_MAX_RETRIES, NULL);
2389 
2390 		if (media_not_present(sdkp, &sshdr))
2391 			return -ENODEV;
2392 
2393 		if (the_result) {
2394 			sense_valid = scsi_sense_valid(&sshdr);
2395 			if (sense_valid &&
2396 			    sshdr.sense_key == UNIT_ATTENTION &&
2397 			    sshdr.asc == 0x29 && sshdr.ascq == 0x00)
2398 				/* Device reset might occur several times,
2399 				 * give it one more chance */
2400 				if (--reset_retries > 0)
2401 					continue;
2402 		}
2403 		retries--;
2404 
2405 	} while (the_result && retries);
2406 
2407 	if (the_result) {
2408 		sd_print_result(sdkp, "Read Capacity(10) failed", the_result);
2409 		read_capacity_error(sdkp, sdp, &sshdr, sense_valid, the_result);
2410 		return -EINVAL;
2411 	}
2412 
2413 	sector_size = get_unaligned_be32(&buffer[4]);
2414 	lba = get_unaligned_be32(&buffer[0]);
2415 
2416 	if (sdp->no_read_capacity_16 && (lba == 0xffffffff)) {
2417 		/* Some buggy (usb cardreader) devices return an lba of
2418 		   0xffffffff when the want to report a size of 0 (with
2419 		   which they really mean no media is present) */
2420 		sdkp->capacity = 0;
2421 		sdkp->physical_block_size = sector_size;
2422 		return sector_size;
2423 	}
2424 
2425 	if (!sd_addressable_capacity(lba, sector_size)) {
2426 		sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a "
2427 			"kernel compiled with support for large block "
2428 			"devices.\n");
2429 		sdkp->capacity = 0;
2430 		return -EOVERFLOW;
2431 	}
2432 
2433 	sdkp->capacity = lba + 1;
2434 	sdkp->physical_block_size = sector_size;
2435 	return sector_size;
2436 }
2437 
2438 static int sd_try_rc16_first(struct scsi_device *sdp)
2439 {
2440 	if (sdp->host->max_cmd_len < 16)
2441 		return 0;
2442 	if (sdp->try_rc_10_first)
2443 		return 0;
2444 	if (sdp->scsi_level > SCSI_SPC_2)
2445 		return 1;
2446 	if (scsi_device_protection(sdp))
2447 		return 1;
2448 	return 0;
2449 }
2450 
2451 /*
2452  * read disk capacity
2453  */
2454 static void
2455 sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer)
2456 {
2457 	int sector_size;
2458 	struct scsi_device *sdp = sdkp->device;
2459 
2460 	if (sd_try_rc16_first(sdp)) {
2461 		sector_size = read_capacity_16(sdkp, sdp, buffer);
2462 		if (sector_size == -EOVERFLOW)
2463 			goto got_data;
2464 		if (sector_size == -ENODEV)
2465 			return;
2466 		if (sector_size < 0)
2467 			sector_size = read_capacity_10(sdkp, sdp, buffer);
2468 		if (sector_size < 0)
2469 			return;
2470 	} else {
2471 		sector_size = read_capacity_10(sdkp, sdp, buffer);
2472 		if (sector_size == -EOVERFLOW)
2473 			goto got_data;
2474 		if (sector_size < 0)
2475 			return;
2476 		if ((sizeof(sdkp->capacity) > 4) &&
2477 		    (sdkp->capacity > 0xffffffffULL)) {
2478 			int old_sector_size = sector_size;
2479 			sd_printk(KERN_NOTICE, sdkp, "Very big device. "
2480 					"Trying to use READ CAPACITY(16).\n");
2481 			sector_size = read_capacity_16(sdkp, sdp, buffer);
2482 			if (sector_size < 0) {
2483 				sd_printk(KERN_NOTICE, sdkp,
2484 					"Using 0xffffffff as device size\n");
2485 				sdkp->capacity = 1 + (sector_t) 0xffffffff;
2486 				sector_size = old_sector_size;
2487 				goto got_data;
2488 			}
2489 			/* Remember that READ CAPACITY(16) succeeded */
2490 			sdp->try_rc_10_first = 0;
2491 		}
2492 	}
2493 
2494 	/* Some devices are known to return the total number of blocks,
2495 	 * not the highest block number.  Some devices have versions
2496 	 * which do this and others which do not.  Some devices we might
2497 	 * suspect of doing this but we don't know for certain.
2498 	 *
2499 	 * If we know the reported capacity is wrong, decrement it.  If
2500 	 * we can only guess, then assume the number of blocks is even
2501 	 * (usually true but not always) and err on the side of lowering
2502 	 * the capacity.
2503 	 */
2504 	if (sdp->fix_capacity ||
2505 	    (sdp->guess_capacity && (sdkp->capacity & 0x01))) {
2506 		sd_printk(KERN_INFO, sdkp, "Adjusting the sector count "
2507 				"from its reported value: %llu\n",
2508 				(unsigned long long) sdkp->capacity);
2509 		--sdkp->capacity;
2510 	}
2511 
2512 got_data:
2513 	if (sector_size == 0) {
2514 		sector_size = 512;
2515 		sd_printk(KERN_NOTICE, sdkp, "Sector size 0 reported, "
2516 			  "assuming 512.\n");
2517 	}
2518 
2519 	if (sector_size != 512 &&
2520 	    sector_size != 1024 &&
2521 	    sector_size != 2048 &&
2522 	    sector_size != 4096) {
2523 		sd_printk(KERN_NOTICE, sdkp, "Unsupported sector size %d.\n",
2524 			  sector_size);
2525 		/*
2526 		 * The user might want to re-format the drive with
2527 		 * a supported sectorsize.  Once this happens, it
2528 		 * would be relatively trivial to set the thing up.
2529 		 * For this reason, we leave the thing in the table.
2530 		 */
2531 		sdkp->capacity = 0;
2532 		/*
2533 		 * set a bogus sector size so the normal read/write
2534 		 * logic in the block layer will eventually refuse any
2535 		 * request on this device without tripping over power
2536 		 * of two sector size assumptions
2537 		 */
2538 		sector_size = 512;
2539 	}
2540 	blk_queue_logical_block_size(sdp->request_queue, sector_size);
2541 	blk_queue_physical_block_size(sdp->request_queue,
2542 				      sdkp->physical_block_size);
2543 	sdkp->device->sector_size = sector_size;
2544 
2545 	if (sdkp->capacity > 0xffffffff)
2546 		sdp->use_16_for_rw = 1;
2547 
2548 }
2549 
2550 /*
2551  * Print disk capacity
2552  */
2553 static void
2554 sd_print_capacity(struct scsi_disk *sdkp,
2555 		  sector_t old_capacity)
2556 {
2557 	int sector_size = sdkp->device->sector_size;
2558 	char cap_str_2[10], cap_str_10[10];
2559 
2560 	string_get_size(sdkp->capacity, sector_size,
2561 			STRING_UNITS_2, cap_str_2, sizeof(cap_str_2));
2562 	string_get_size(sdkp->capacity, sector_size,
2563 			STRING_UNITS_10, cap_str_10,
2564 			sizeof(cap_str_10));
2565 
2566 	if (sdkp->first_scan || old_capacity != sdkp->capacity) {
2567 		sd_printk(KERN_NOTICE, sdkp,
2568 			  "%llu %d-byte logical blocks: (%s/%s)\n",
2569 			  (unsigned long long)sdkp->capacity,
2570 			  sector_size, cap_str_10, cap_str_2);
2571 
2572 		if (sdkp->physical_block_size != sector_size)
2573 			sd_printk(KERN_NOTICE, sdkp,
2574 				  "%u-byte physical blocks\n",
2575 				  sdkp->physical_block_size);
2576 
2577 		sd_zbc_print_zones(sdkp);
2578 	}
2579 }
2580 
2581 /* called with buffer of length 512 */
2582 static inline int
2583 sd_do_mode_sense(struct scsi_device *sdp, int dbd, int modepage,
2584 		 unsigned char *buffer, int len, struct scsi_mode_data *data,
2585 		 struct scsi_sense_hdr *sshdr)
2586 {
2587 	return scsi_mode_sense(sdp, dbd, modepage, buffer, len,
2588 			       SD_TIMEOUT, SD_MAX_RETRIES, data,
2589 			       sshdr);
2590 }
2591 
2592 /*
2593  * read write protect setting, if possible - called only in sd_revalidate_disk()
2594  * called with buffer of length SD_BUF_SIZE
2595  */
2596 static void
2597 sd_read_write_protect_flag(struct scsi_disk *sdkp, unsigned char *buffer)
2598 {
2599 	int res;
2600 	struct scsi_device *sdp = sdkp->device;
2601 	struct scsi_mode_data data;
2602 	int disk_ro = get_disk_ro(sdkp->disk);
2603 	int old_wp = sdkp->write_prot;
2604 
2605 	set_disk_ro(sdkp->disk, 0);
2606 	if (sdp->skip_ms_page_3f) {
2607 		sd_first_printk(KERN_NOTICE, sdkp, "Assuming Write Enabled\n");
2608 		return;
2609 	}
2610 
2611 	if (sdp->use_192_bytes_for_3f) {
2612 		res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 192, &data, NULL);
2613 	} else {
2614 		/*
2615 		 * First attempt: ask for all pages (0x3F), but only 4 bytes.
2616 		 * We have to start carefully: some devices hang if we ask
2617 		 * for more than is available.
2618 		 */
2619 		res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 4, &data, NULL);
2620 
2621 		/*
2622 		 * Second attempt: ask for page 0 When only page 0 is
2623 		 * implemented, a request for page 3F may return Sense Key
2624 		 * 5: Illegal Request, Sense Code 24: Invalid field in
2625 		 * CDB.
2626 		 */
2627 		if (!scsi_status_is_good(res))
2628 			res = sd_do_mode_sense(sdp, 0, 0, buffer, 4, &data, NULL);
2629 
2630 		/*
2631 		 * Third attempt: ask 255 bytes, as we did earlier.
2632 		 */
2633 		if (!scsi_status_is_good(res))
2634 			res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 255,
2635 					       &data, NULL);
2636 	}
2637 
2638 	if (!scsi_status_is_good(res)) {
2639 		sd_first_printk(KERN_WARNING, sdkp,
2640 			  "Test WP failed, assume Write Enabled\n");
2641 	} else {
2642 		sdkp->write_prot = ((data.device_specific & 0x80) != 0);
2643 		set_disk_ro(sdkp->disk, sdkp->write_prot || disk_ro);
2644 		if (sdkp->first_scan || old_wp != sdkp->write_prot) {
2645 			sd_printk(KERN_NOTICE, sdkp, "Write Protect is %s\n",
2646 				  sdkp->write_prot ? "on" : "off");
2647 			sd_printk(KERN_DEBUG, sdkp, "Mode Sense: %4ph\n", buffer);
2648 		}
2649 	}
2650 }
2651 
2652 /*
2653  * sd_read_cache_type - called only from sd_revalidate_disk()
2654  * called with buffer of length SD_BUF_SIZE
2655  */
2656 static void
2657 sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer)
2658 {
2659 	int len = 0, res;
2660 	struct scsi_device *sdp = sdkp->device;
2661 
2662 	int dbd;
2663 	int modepage;
2664 	int first_len;
2665 	struct scsi_mode_data data;
2666 	struct scsi_sense_hdr sshdr;
2667 	int old_wce = sdkp->WCE;
2668 	int old_rcd = sdkp->RCD;
2669 	int old_dpofua = sdkp->DPOFUA;
2670 
2671 
2672 	if (sdkp->cache_override)
2673 		return;
2674 
2675 	first_len = 4;
2676 	if (sdp->skip_ms_page_8) {
2677 		if (sdp->type == TYPE_RBC)
2678 			goto defaults;
2679 		else {
2680 			if (sdp->skip_ms_page_3f)
2681 				goto defaults;
2682 			modepage = 0x3F;
2683 			if (sdp->use_192_bytes_for_3f)
2684 				first_len = 192;
2685 			dbd = 0;
2686 		}
2687 	} else if (sdp->type == TYPE_RBC) {
2688 		modepage = 6;
2689 		dbd = 8;
2690 	} else {
2691 		modepage = 8;
2692 		dbd = 0;
2693 	}
2694 
2695 	/* cautiously ask */
2696 	res = sd_do_mode_sense(sdp, dbd, modepage, buffer, first_len,
2697 			&data, &sshdr);
2698 
2699 	if (!scsi_status_is_good(res))
2700 		goto bad_sense;
2701 
2702 	if (!data.header_length) {
2703 		modepage = 6;
2704 		first_len = 0;
2705 		sd_first_printk(KERN_ERR, sdkp,
2706 				"Missing header in MODE_SENSE response\n");
2707 	}
2708 
2709 	/* that went OK, now ask for the proper length */
2710 	len = data.length;
2711 
2712 	/*
2713 	 * We're only interested in the first three bytes, actually.
2714 	 * But the data cache page is defined for the first 20.
2715 	 */
2716 	if (len < 3)
2717 		goto bad_sense;
2718 	else if (len > SD_BUF_SIZE) {
2719 		sd_first_printk(KERN_NOTICE, sdkp, "Truncating mode parameter "
2720 			  "data from %d to %d bytes\n", len, SD_BUF_SIZE);
2721 		len = SD_BUF_SIZE;
2722 	}
2723 	if (modepage == 0x3F && sdp->use_192_bytes_for_3f)
2724 		len = 192;
2725 
2726 	/* Get the data */
2727 	if (len > first_len)
2728 		res = sd_do_mode_sense(sdp, dbd, modepage, buffer, len,
2729 				&data, &sshdr);
2730 
2731 	if (scsi_status_is_good(res)) {
2732 		int offset = data.header_length + data.block_descriptor_length;
2733 
2734 		while (offset < len) {
2735 			u8 page_code = buffer[offset] & 0x3F;
2736 			u8 spf       = buffer[offset] & 0x40;
2737 
2738 			if (page_code == 8 || page_code == 6) {
2739 				/* We're interested only in the first 3 bytes.
2740 				 */
2741 				if (len - offset <= 2) {
2742 					sd_first_printk(KERN_ERR, sdkp,
2743 						"Incomplete mode parameter "
2744 							"data\n");
2745 					goto defaults;
2746 				} else {
2747 					modepage = page_code;
2748 					goto Page_found;
2749 				}
2750 			} else {
2751 				/* Go to the next page */
2752 				if (spf && len - offset > 3)
2753 					offset += 4 + (buffer[offset+2] << 8) +
2754 						buffer[offset+3];
2755 				else if (!spf && len - offset > 1)
2756 					offset += 2 + buffer[offset+1];
2757 				else {
2758 					sd_first_printk(KERN_ERR, sdkp,
2759 							"Incomplete mode "
2760 							"parameter data\n");
2761 					goto defaults;
2762 				}
2763 			}
2764 		}
2765 
2766 		sd_first_printk(KERN_ERR, sdkp, "No Caching mode page found\n");
2767 		goto defaults;
2768 
2769 	Page_found:
2770 		if (modepage == 8) {
2771 			sdkp->WCE = ((buffer[offset + 2] & 0x04) != 0);
2772 			sdkp->RCD = ((buffer[offset + 2] & 0x01) != 0);
2773 		} else {
2774 			sdkp->WCE = ((buffer[offset + 2] & 0x01) == 0);
2775 			sdkp->RCD = 0;
2776 		}
2777 
2778 		sdkp->DPOFUA = (data.device_specific & 0x10) != 0;
2779 		if (sdp->broken_fua) {
2780 			sd_first_printk(KERN_NOTICE, sdkp, "Disabling FUA\n");
2781 			sdkp->DPOFUA = 0;
2782 		} else if (sdkp->DPOFUA && !sdkp->device->use_10_for_rw &&
2783 			   !sdkp->device->use_16_for_rw) {
2784 			sd_first_printk(KERN_NOTICE, sdkp,
2785 				  "Uses READ/WRITE(6), disabling FUA\n");
2786 			sdkp->DPOFUA = 0;
2787 		}
2788 
2789 		/* No cache flush allowed for write protected devices */
2790 		if (sdkp->WCE && sdkp->write_prot)
2791 			sdkp->WCE = 0;
2792 
2793 		if (sdkp->first_scan || old_wce != sdkp->WCE ||
2794 		    old_rcd != sdkp->RCD || old_dpofua != sdkp->DPOFUA)
2795 			sd_printk(KERN_NOTICE, sdkp,
2796 				  "Write cache: %s, read cache: %s, %s\n",
2797 				  sdkp->WCE ? "enabled" : "disabled",
2798 				  sdkp->RCD ? "disabled" : "enabled",
2799 				  sdkp->DPOFUA ? "supports DPO and FUA"
2800 				  : "doesn't support DPO or FUA");
2801 
2802 		return;
2803 	}
2804 
2805 bad_sense:
2806 	if (scsi_sense_valid(&sshdr) &&
2807 	    sshdr.sense_key == ILLEGAL_REQUEST &&
2808 	    sshdr.asc == 0x24 && sshdr.ascq == 0x0)
2809 		/* Invalid field in CDB */
2810 		sd_first_printk(KERN_NOTICE, sdkp, "Cache data unavailable\n");
2811 	else
2812 		sd_first_printk(KERN_ERR, sdkp,
2813 				"Asking for cache data failed\n");
2814 
2815 defaults:
2816 	if (sdp->wce_default_on) {
2817 		sd_first_printk(KERN_NOTICE, sdkp,
2818 				"Assuming drive cache: write back\n");
2819 		sdkp->WCE = 1;
2820 	} else {
2821 		sd_first_printk(KERN_ERR, sdkp,
2822 				"Assuming drive cache: write through\n");
2823 		sdkp->WCE = 0;
2824 	}
2825 	sdkp->RCD = 0;
2826 	sdkp->DPOFUA = 0;
2827 }
2828 
2829 /*
2830  * The ATO bit indicates whether the DIF application tag is available
2831  * for use by the operating system.
2832  */
2833 static void sd_read_app_tag_own(struct scsi_disk *sdkp, unsigned char *buffer)
2834 {
2835 	int res, offset;
2836 	struct scsi_device *sdp = sdkp->device;
2837 	struct scsi_mode_data data;
2838 	struct scsi_sense_hdr sshdr;
2839 
2840 	if (sdp->type != TYPE_DISK && sdp->type != TYPE_ZBC)
2841 		return;
2842 
2843 	if (sdkp->protection_type == 0)
2844 		return;
2845 
2846 	res = scsi_mode_sense(sdp, 1, 0x0a, buffer, 36, SD_TIMEOUT,
2847 			      SD_MAX_RETRIES, &data, &sshdr);
2848 
2849 	if (!scsi_status_is_good(res) || !data.header_length ||
2850 	    data.length < 6) {
2851 		sd_first_printk(KERN_WARNING, sdkp,
2852 			  "getting Control mode page failed, assume no ATO\n");
2853 
2854 		if (scsi_sense_valid(&sshdr))
2855 			sd_print_sense_hdr(sdkp, &sshdr);
2856 
2857 		return;
2858 	}
2859 
2860 	offset = data.header_length + data.block_descriptor_length;
2861 
2862 	if ((buffer[offset] & 0x3f) != 0x0a) {
2863 		sd_first_printk(KERN_ERR, sdkp, "ATO Got wrong page\n");
2864 		return;
2865 	}
2866 
2867 	if ((buffer[offset + 5] & 0x80) == 0)
2868 		return;
2869 
2870 	sdkp->ATO = 1;
2871 
2872 	return;
2873 }
2874 
2875 /**
2876  * sd_read_block_limits - Query disk device for preferred I/O sizes.
2877  * @sdkp: disk to query
2878  */
2879 static void sd_read_block_limits(struct scsi_disk *sdkp)
2880 {
2881 	unsigned int sector_sz = sdkp->device->sector_size;
2882 	const int vpd_len = 64;
2883 	unsigned char *buffer = kmalloc(vpd_len, GFP_KERNEL);
2884 
2885 	if (!buffer ||
2886 	    /* Block Limits VPD */
2887 	    scsi_get_vpd_page(sdkp->device, 0xb0, buffer, vpd_len))
2888 		goto out;
2889 
2890 	blk_queue_io_min(sdkp->disk->queue,
2891 			 get_unaligned_be16(&buffer[6]) * sector_sz);
2892 
2893 	sdkp->max_xfer_blocks = get_unaligned_be32(&buffer[8]);
2894 	sdkp->opt_xfer_blocks = get_unaligned_be32(&buffer[12]);
2895 
2896 	if (buffer[3] == 0x3c) {
2897 		unsigned int lba_count, desc_count;
2898 
2899 		sdkp->max_ws_blocks = (u32)get_unaligned_be64(&buffer[36]);
2900 
2901 		if (!sdkp->lbpme)
2902 			goto out;
2903 
2904 		lba_count = get_unaligned_be32(&buffer[20]);
2905 		desc_count = get_unaligned_be32(&buffer[24]);
2906 
2907 		if (lba_count && desc_count)
2908 			sdkp->max_unmap_blocks = lba_count;
2909 
2910 		sdkp->unmap_granularity = get_unaligned_be32(&buffer[28]);
2911 
2912 		if (buffer[32] & 0x80)
2913 			sdkp->unmap_alignment =
2914 				get_unaligned_be32(&buffer[32]) & ~(1 << 31);
2915 
2916 		if (!sdkp->lbpvpd) { /* LBP VPD page not provided */
2917 
2918 			if (sdkp->max_unmap_blocks)
2919 				sd_config_discard(sdkp, SD_LBP_UNMAP);
2920 			else
2921 				sd_config_discard(sdkp, SD_LBP_WS16);
2922 
2923 		} else {	/* LBP VPD page tells us what to use */
2924 			if (sdkp->lbpu && sdkp->max_unmap_blocks)
2925 				sd_config_discard(sdkp, SD_LBP_UNMAP);
2926 			else if (sdkp->lbpws)
2927 				sd_config_discard(sdkp, SD_LBP_WS16);
2928 			else if (sdkp->lbpws10)
2929 				sd_config_discard(sdkp, SD_LBP_WS10);
2930 			else
2931 				sd_config_discard(sdkp, SD_LBP_DISABLE);
2932 		}
2933 	}
2934 
2935  out:
2936 	kfree(buffer);
2937 }
2938 
2939 /**
2940  * sd_read_block_characteristics - Query block dev. characteristics
2941  * @sdkp: disk to query
2942  */
2943 static void sd_read_block_characteristics(struct scsi_disk *sdkp)
2944 {
2945 	struct request_queue *q = sdkp->disk->queue;
2946 	unsigned char *buffer;
2947 	u16 rot;
2948 	const int vpd_len = 64;
2949 
2950 	buffer = kmalloc(vpd_len, GFP_KERNEL);
2951 
2952 	if (!buffer ||
2953 	    /* Block Device Characteristics VPD */
2954 	    scsi_get_vpd_page(sdkp->device, 0xb1, buffer, vpd_len))
2955 		goto out;
2956 
2957 	rot = get_unaligned_be16(&buffer[4]);
2958 
2959 	if (rot == 1) {
2960 		blk_queue_flag_set(QUEUE_FLAG_NONROT, q);
2961 		blk_queue_flag_clear(QUEUE_FLAG_ADD_RANDOM, q);
2962 	}
2963 
2964 	if (sdkp->device->type == TYPE_ZBC) {
2965 		/* Host-managed */
2966 		q->limits.zoned = BLK_ZONED_HM;
2967 	} else {
2968 		sdkp->zoned = (buffer[8] >> 4) & 3;
2969 		if (sdkp->zoned == 1)
2970 			/* Host-aware */
2971 			q->limits.zoned = BLK_ZONED_HA;
2972 		else
2973 			/*
2974 			 * Treat drive-managed devices as
2975 			 * regular block devices.
2976 			 */
2977 			q->limits.zoned = BLK_ZONED_NONE;
2978 	}
2979 	if (blk_queue_is_zoned(q) && sdkp->first_scan)
2980 		sd_printk(KERN_NOTICE, sdkp, "Host-%s zoned block device\n",
2981 		      q->limits.zoned == BLK_ZONED_HM ? "managed" : "aware");
2982 
2983  out:
2984 	kfree(buffer);
2985 }
2986 
2987 /**
2988  * sd_read_block_provisioning - Query provisioning VPD page
2989  * @sdkp: disk to query
2990  */
2991 static void sd_read_block_provisioning(struct scsi_disk *sdkp)
2992 {
2993 	unsigned char *buffer;
2994 	const int vpd_len = 8;
2995 
2996 	if (sdkp->lbpme == 0)
2997 		return;
2998 
2999 	buffer = kmalloc(vpd_len, GFP_KERNEL);
3000 
3001 	if (!buffer || scsi_get_vpd_page(sdkp->device, 0xb2, buffer, vpd_len))
3002 		goto out;
3003 
3004 	sdkp->lbpvpd	= 1;
3005 	sdkp->lbpu	= (buffer[5] >> 7) & 1;	/* UNMAP */
3006 	sdkp->lbpws	= (buffer[5] >> 6) & 1;	/* WRITE SAME(16) with UNMAP */
3007 	sdkp->lbpws10	= (buffer[5] >> 5) & 1;	/* WRITE SAME(10) with UNMAP */
3008 
3009  out:
3010 	kfree(buffer);
3011 }
3012 
3013 static void sd_read_write_same(struct scsi_disk *sdkp, unsigned char *buffer)
3014 {
3015 	struct scsi_device *sdev = sdkp->device;
3016 
3017 	if (sdev->host->no_write_same) {
3018 		sdev->no_write_same = 1;
3019 
3020 		return;
3021 	}
3022 
3023 	if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, INQUIRY) < 0) {
3024 		/* too large values might cause issues with arcmsr */
3025 		int vpd_buf_len = 64;
3026 
3027 		sdev->no_report_opcodes = 1;
3028 
3029 		/* Disable WRITE SAME if REPORT SUPPORTED OPERATION
3030 		 * CODES is unsupported and the device has an ATA
3031 		 * Information VPD page (SAT).
3032 		 */
3033 		if (!scsi_get_vpd_page(sdev, 0x89, buffer, vpd_buf_len))
3034 			sdev->no_write_same = 1;
3035 	}
3036 
3037 	if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, WRITE_SAME_16) == 1)
3038 		sdkp->ws16 = 1;
3039 
3040 	if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, WRITE_SAME) == 1)
3041 		sdkp->ws10 = 1;
3042 }
3043 
3044 static void sd_read_security(struct scsi_disk *sdkp, unsigned char *buffer)
3045 {
3046 	struct scsi_device *sdev = sdkp->device;
3047 
3048 	if (!sdev->security_supported)
3049 		return;
3050 
3051 	if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE,
3052 			SECURITY_PROTOCOL_IN) == 1 &&
3053 	    scsi_report_opcode(sdev, buffer, SD_BUF_SIZE,
3054 			SECURITY_PROTOCOL_OUT) == 1)
3055 		sdkp->security = 1;
3056 }
3057 
3058 /**
3059  *	sd_revalidate_disk - called the first time a new disk is seen,
3060  *	performs disk spin up, read_capacity, etc.
3061  *	@disk: struct gendisk we care about
3062  **/
3063 static int sd_revalidate_disk(struct gendisk *disk)
3064 {
3065 	struct scsi_disk *sdkp = scsi_disk(disk);
3066 	struct scsi_device *sdp = sdkp->device;
3067 	struct request_queue *q = sdkp->disk->queue;
3068 	sector_t old_capacity = sdkp->capacity;
3069 	unsigned char *buffer;
3070 	unsigned int dev_max, rw_max;
3071 
3072 	SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp,
3073 				      "sd_revalidate_disk\n"));
3074 
3075 	/*
3076 	 * If the device is offline, don't try and read capacity or any
3077 	 * of the other niceties.
3078 	 */
3079 	if (!scsi_device_online(sdp))
3080 		goto out;
3081 
3082 	buffer = kmalloc(SD_BUF_SIZE, GFP_KERNEL);
3083 	if (!buffer) {
3084 		sd_printk(KERN_WARNING, sdkp, "sd_revalidate_disk: Memory "
3085 			  "allocation failure.\n");
3086 		goto out;
3087 	}
3088 
3089 	sd_spinup_disk(sdkp);
3090 
3091 	/*
3092 	 * Without media there is no reason to ask; moreover, some devices
3093 	 * react badly if we do.
3094 	 */
3095 	if (sdkp->media_present) {
3096 		sd_read_capacity(sdkp, buffer);
3097 
3098 		if (scsi_device_supports_vpd(sdp)) {
3099 			sd_read_block_provisioning(sdkp);
3100 			sd_read_block_limits(sdkp);
3101 			sd_read_block_characteristics(sdkp);
3102 			sd_zbc_read_zones(sdkp, buffer);
3103 		}
3104 
3105 		sd_print_capacity(sdkp, old_capacity);
3106 
3107 		sd_read_write_protect_flag(sdkp, buffer);
3108 		sd_read_cache_type(sdkp, buffer);
3109 		sd_read_app_tag_own(sdkp, buffer);
3110 		sd_read_write_same(sdkp, buffer);
3111 		sd_read_security(sdkp, buffer);
3112 	}
3113 
3114 	/*
3115 	 * We now have all cache related info, determine how we deal
3116 	 * with flush requests.
3117 	 */
3118 	sd_set_flush_flag(sdkp);
3119 
3120 	/* Initial block count limit based on CDB TRANSFER LENGTH field size. */
3121 	dev_max = sdp->use_16_for_rw ? SD_MAX_XFER_BLOCKS : SD_DEF_XFER_BLOCKS;
3122 
3123 	/* Some devices report a maximum block count for READ/WRITE requests. */
3124 	dev_max = min_not_zero(dev_max, sdkp->max_xfer_blocks);
3125 	q->limits.max_dev_sectors = logical_to_sectors(sdp, dev_max);
3126 
3127 	/*
3128 	 * Determine the device's preferred I/O size for reads and writes
3129 	 * unless the reported value is unreasonably small, large, or
3130 	 * garbage.
3131 	 */
3132 	if (sdkp->opt_xfer_blocks &&
3133 	    sdkp->opt_xfer_blocks <= dev_max &&
3134 	    sdkp->opt_xfer_blocks <= SD_DEF_XFER_BLOCKS &&
3135 	    logical_to_bytes(sdp, sdkp->opt_xfer_blocks) >= PAGE_SIZE) {
3136 		q->limits.io_opt = logical_to_bytes(sdp, sdkp->opt_xfer_blocks);
3137 		rw_max = logical_to_sectors(sdp, sdkp->opt_xfer_blocks);
3138 	} else
3139 		rw_max = min_not_zero(logical_to_sectors(sdp, dev_max),
3140 				      (sector_t)BLK_DEF_MAX_SECTORS);
3141 
3142 	/* Do not exceed controller limit */
3143 	rw_max = min(rw_max, queue_max_hw_sectors(q));
3144 
3145 	/*
3146 	 * Only update max_sectors if previously unset or if the current value
3147 	 * exceeds the capabilities of the hardware.
3148 	 */
3149 	if (sdkp->first_scan ||
3150 	    q->limits.max_sectors > q->limits.max_dev_sectors ||
3151 	    q->limits.max_sectors > q->limits.max_hw_sectors)
3152 		q->limits.max_sectors = rw_max;
3153 
3154 	sdkp->first_scan = 0;
3155 
3156 	set_capacity(disk, logical_to_sectors(sdp, sdkp->capacity));
3157 	sd_config_write_same(sdkp);
3158 	kfree(buffer);
3159 
3160  out:
3161 	return 0;
3162 }
3163 
3164 /**
3165  *	sd_unlock_native_capacity - unlock native capacity
3166  *	@disk: struct gendisk to set capacity for
3167  *
3168  *	Block layer calls this function if it detects that partitions
3169  *	on @disk reach beyond the end of the device.  If the SCSI host
3170  *	implements ->unlock_native_capacity() method, it's invoked to
3171  *	give it a chance to adjust the device capacity.
3172  *
3173  *	CONTEXT:
3174  *	Defined by block layer.  Might sleep.
3175  */
3176 static void sd_unlock_native_capacity(struct gendisk *disk)
3177 {
3178 	struct scsi_device *sdev = scsi_disk(disk)->device;
3179 
3180 	if (sdev->host->hostt->unlock_native_capacity)
3181 		sdev->host->hostt->unlock_native_capacity(sdev);
3182 }
3183 
3184 /**
3185  *	sd_format_disk_name - format disk name
3186  *	@prefix: name prefix - ie. "sd" for SCSI disks
3187  *	@index: index of the disk to format name for
3188  *	@buf: output buffer
3189  *	@buflen: length of the output buffer
3190  *
3191  *	SCSI disk names starts at sda.  The 26th device is sdz and the
3192  *	27th is sdaa.  The last one for two lettered suffix is sdzz
3193  *	which is followed by sdaaa.
3194  *
3195  *	This is basically 26 base counting with one extra 'nil' entry
3196  *	at the beginning from the second digit on and can be
3197  *	determined using similar method as 26 base conversion with the
3198  *	index shifted -1 after each digit is computed.
3199  *
3200  *	CONTEXT:
3201  *	Don't care.
3202  *
3203  *	RETURNS:
3204  *	0 on success, -errno on failure.
3205  */
3206 static int sd_format_disk_name(char *prefix, int index, char *buf, int buflen)
3207 {
3208 	const int base = 'z' - 'a' + 1;
3209 	char *begin = buf + strlen(prefix);
3210 	char *end = buf + buflen;
3211 	char *p;
3212 	int unit;
3213 
3214 	p = end - 1;
3215 	*p = '\0';
3216 	unit = base;
3217 	do {
3218 		if (p == begin)
3219 			return -EINVAL;
3220 		*--p = 'a' + (index % unit);
3221 		index = (index / unit) - 1;
3222 	} while (index >= 0);
3223 
3224 	memmove(begin, p, end - p);
3225 	memcpy(buf, prefix, strlen(prefix));
3226 
3227 	return 0;
3228 }
3229 
3230 /*
3231  * The asynchronous part of sd_probe
3232  */
3233 static void sd_probe_async(void *data, async_cookie_t cookie)
3234 {
3235 	struct scsi_disk *sdkp = data;
3236 	struct scsi_device *sdp;
3237 	struct gendisk *gd;
3238 	u32 index;
3239 	struct device *dev;
3240 
3241 	sdp = sdkp->device;
3242 	gd = sdkp->disk;
3243 	index = sdkp->index;
3244 	dev = &sdp->sdev_gendev;
3245 
3246 	gd->major = sd_major((index & 0xf0) >> 4);
3247 	gd->first_minor = ((index & 0xf) << 4) | (index & 0xfff00);
3248 
3249 	gd->fops = &sd_fops;
3250 	gd->private_data = &sdkp->driver;
3251 	gd->queue = sdkp->device->request_queue;
3252 
3253 	/* defaults, until the device tells us otherwise */
3254 	sdp->sector_size = 512;
3255 	sdkp->capacity = 0;
3256 	sdkp->media_present = 1;
3257 	sdkp->write_prot = 0;
3258 	sdkp->cache_override = 0;
3259 	sdkp->WCE = 0;
3260 	sdkp->RCD = 0;
3261 	sdkp->ATO = 0;
3262 	sdkp->first_scan = 1;
3263 	sdkp->max_medium_access_timeouts = SD_MAX_MEDIUM_TIMEOUTS;
3264 
3265 	sd_revalidate_disk(gd);
3266 
3267 	gd->flags = GENHD_FL_EXT_DEVT;
3268 	if (sdp->removable) {
3269 		gd->flags |= GENHD_FL_REMOVABLE;
3270 		gd->events |= DISK_EVENT_MEDIA_CHANGE;
3271 	}
3272 
3273 	blk_pm_runtime_init(sdp->request_queue, dev);
3274 	device_add_disk(dev, gd);
3275 	if (sdkp->capacity)
3276 		sd_dif_config_host(sdkp);
3277 
3278 	sd_revalidate_disk(gd);
3279 
3280 	if (sdkp->security) {
3281 		sdkp->opal_dev = init_opal_dev(sdp, &sd_sec_submit);
3282 		if (sdkp->opal_dev)
3283 			sd_printk(KERN_NOTICE, sdkp, "supports TCG Opal\n");
3284 	}
3285 
3286 	sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n",
3287 		  sdp->removable ? "removable " : "");
3288 	scsi_autopm_put_device(sdp);
3289 	put_device(&sdkp->dev);
3290 }
3291 
3292 /**
3293  *	sd_probe - called during driver initialization and whenever a
3294  *	new scsi device is attached to the system. It is called once
3295  *	for each scsi device (not just disks) present.
3296  *	@dev: pointer to device object
3297  *
3298  *	Returns 0 if successful (or not interested in this scsi device
3299  *	(e.g. scanner)); 1 when there is an error.
3300  *
3301  *	Note: this function is invoked from the scsi mid-level.
3302  *	This function sets up the mapping between a given
3303  *	<host,channel,id,lun> (found in sdp) and new device name
3304  *	(e.g. /dev/sda). More precisely it is the block device major
3305  *	and minor number that is chosen here.
3306  *
3307  *	Assume sd_probe is not re-entrant (for time being)
3308  *	Also think about sd_probe() and sd_remove() running coincidentally.
3309  **/
3310 static int sd_probe(struct device *dev)
3311 {
3312 	struct scsi_device *sdp = to_scsi_device(dev);
3313 	struct scsi_disk *sdkp;
3314 	struct gendisk *gd;
3315 	int index;
3316 	int error;
3317 
3318 	scsi_autopm_get_device(sdp);
3319 	error = -ENODEV;
3320 	if (sdp->type != TYPE_DISK &&
3321 	    sdp->type != TYPE_ZBC &&
3322 	    sdp->type != TYPE_MOD &&
3323 	    sdp->type != TYPE_RBC)
3324 		goto out;
3325 
3326 #ifndef CONFIG_BLK_DEV_ZONED
3327 	if (sdp->type == TYPE_ZBC)
3328 		goto out;
3329 #endif
3330 	SCSI_LOG_HLQUEUE(3, sdev_printk(KERN_INFO, sdp,
3331 					"sd_probe\n"));
3332 
3333 	error = -ENOMEM;
3334 	sdkp = kzalloc(sizeof(*sdkp), GFP_KERNEL);
3335 	if (!sdkp)
3336 		goto out;
3337 
3338 	gd = alloc_disk(SD_MINORS);
3339 	if (!gd)
3340 		goto out_free;
3341 
3342 	do {
3343 		if (!ida_pre_get(&sd_index_ida, GFP_KERNEL))
3344 			goto out_put;
3345 
3346 		spin_lock(&sd_index_lock);
3347 		error = ida_get_new(&sd_index_ida, &index);
3348 		spin_unlock(&sd_index_lock);
3349 	} while (error == -EAGAIN);
3350 
3351 	if (error) {
3352 		sdev_printk(KERN_WARNING, sdp, "sd_probe: memory exhausted.\n");
3353 		goto out_put;
3354 	}
3355 
3356 	error = sd_format_disk_name("sd", index, gd->disk_name, DISK_NAME_LEN);
3357 	if (error) {
3358 		sdev_printk(KERN_WARNING, sdp, "SCSI disk (sd) name length exceeded.\n");
3359 		goto out_free_index;
3360 	}
3361 
3362 	sdkp->device = sdp;
3363 	sdkp->driver = &sd_template;
3364 	sdkp->disk = gd;
3365 	sdkp->index = index;
3366 	atomic_set(&sdkp->openers, 0);
3367 	atomic_set(&sdkp->device->ioerr_cnt, 0);
3368 
3369 	if (!sdp->request_queue->rq_timeout) {
3370 		if (sdp->type != TYPE_MOD)
3371 			blk_queue_rq_timeout(sdp->request_queue, SD_TIMEOUT);
3372 		else
3373 			blk_queue_rq_timeout(sdp->request_queue,
3374 					     SD_MOD_TIMEOUT);
3375 	}
3376 
3377 	device_initialize(&sdkp->dev);
3378 	sdkp->dev.parent = dev;
3379 	sdkp->dev.class = &sd_disk_class;
3380 	dev_set_name(&sdkp->dev, "%s", dev_name(dev));
3381 
3382 	error = device_add(&sdkp->dev);
3383 	if (error)
3384 		goto out_free_index;
3385 
3386 	get_device(dev);
3387 	dev_set_drvdata(dev, sdkp);
3388 
3389 	get_device(&sdkp->dev);	/* prevent release before async_schedule */
3390 	async_schedule_domain(sd_probe_async, sdkp, &scsi_sd_probe_domain);
3391 
3392 	return 0;
3393 
3394  out_free_index:
3395 	spin_lock(&sd_index_lock);
3396 	ida_remove(&sd_index_ida, index);
3397 	spin_unlock(&sd_index_lock);
3398  out_put:
3399 	put_disk(gd);
3400  out_free:
3401 	kfree(sdkp);
3402  out:
3403 	scsi_autopm_put_device(sdp);
3404 	return error;
3405 }
3406 
3407 /**
3408  *	sd_remove - called whenever a scsi disk (previously recognized by
3409  *	sd_probe) is detached from the system. It is called (potentially
3410  *	multiple times) during sd module unload.
3411  *	@dev: pointer to device object
3412  *
3413  *	Note: this function is invoked from the scsi mid-level.
3414  *	This function potentially frees up a device name (e.g. /dev/sdc)
3415  *	that could be re-used by a subsequent sd_probe().
3416  *	This function is not called when the built-in sd driver is "exit-ed".
3417  **/
3418 static int sd_remove(struct device *dev)
3419 {
3420 	struct scsi_disk *sdkp;
3421 	dev_t devt;
3422 
3423 	sdkp = dev_get_drvdata(dev);
3424 	devt = disk_devt(sdkp->disk);
3425 	scsi_autopm_get_device(sdkp->device);
3426 
3427 	async_synchronize_full_domain(&scsi_sd_pm_domain);
3428 	async_synchronize_full_domain(&scsi_sd_probe_domain);
3429 	device_del(&sdkp->dev);
3430 	del_gendisk(sdkp->disk);
3431 	sd_shutdown(dev);
3432 
3433 	sd_zbc_remove(sdkp);
3434 
3435 	free_opal_dev(sdkp->opal_dev);
3436 
3437 	blk_register_region(devt, SD_MINORS, NULL,
3438 			    sd_default_probe, NULL, NULL);
3439 
3440 	mutex_lock(&sd_ref_mutex);
3441 	dev_set_drvdata(dev, NULL);
3442 	put_device(&sdkp->dev);
3443 	mutex_unlock(&sd_ref_mutex);
3444 
3445 	return 0;
3446 }
3447 
3448 /**
3449  *	scsi_disk_release - Called to free the scsi_disk structure
3450  *	@dev: pointer to embedded class device
3451  *
3452  *	sd_ref_mutex must be held entering this routine.  Because it is
3453  *	called on last put, you should always use the scsi_disk_get()
3454  *	scsi_disk_put() helpers which manipulate the semaphore directly
3455  *	and never do a direct put_device.
3456  **/
3457 static void scsi_disk_release(struct device *dev)
3458 {
3459 	struct scsi_disk *sdkp = to_scsi_disk(dev);
3460 	struct gendisk *disk = sdkp->disk;
3461 
3462 	spin_lock(&sd_index_lock);
3463 	ida_remove(&sd_index_ida, sdkp->index);
3464 	spin_unlock(&sd_index_lock);
3465 
3466 	disk->private_data = NULL;
3467 	put_disk(disk);
3468 	put_device(&sdkp->device->sdev_gendev);
3469 
3470 	kfree(sdkp);
3471 }
3472 
3473 static int sd_start_stop_device(struct scsi_disk *sdkp, int start)
3474 {
3475 	unsigned char cmd[6] = { START_STOP };	/* START_VALID */
3476 	struct scsi_sense_hdr sshdr;
3477 	struct scsi_device *sdp = sdkp->device;
3478 	int res;
3479 
3480 	if (start)
3481 		cmd[4] |= 1;	/* START */
3482 
3483 	if (sdp->start_stop_pwr_cond)
3484 		cmd[4] |= start ? 1 << 4 : 3 << 4;	/* Active or Standby */
3485 
3486 	if (!scsi_device_online(sdp))
3487 		return -ENODEV;
3488 
3489 	res = scsi_execute(sdp, cmd, DMA_NONE, NULL, 0, NULL, &sshdr,
3490 			SD_TIMEOUT, SD_MAX_RETRIES, 0, RQF_PM, NULL);
3491 	if (res) {
3492 		sd_print_result(sdkp, "Start/Stop Unit failed", res);
3493 		if (driver_byte(res) & DRIVER_SENSE)
3494 			sd_print_sense_hdr(sdkp, &sshdr);
3495 		if (scsi_sense_valid(&sshdr) &&
3496 			/* 0x3a is medium not present */
3497 			sshdr.asc == 0x3a)
3498 			res = 0;
3499 	}
3500 
3501 	/* SCSI error codes must not go to the generic layer */
3502 	if (res)
3503 		return -EIO;
3504 
3505 	return 0;
3506 }
3507 
3508 /*
3509  * Send a SYNCHRONIZE CACHE instruction down to the device through
3510  * the normal SCSI command structure.  Wait for the command to
3511  * complete.
3512  */
3513 static void sd_shutdown(struct device *dev)
3514 {
3515 	struct scsi_disk *sdkp = dev_get_drvdata(dev);
3516 
3517 	if (!sdkp)
3518 		return;         /* this can happen */
3519 
3520 	if (pm_runtime_suspended(dev))
3521 		return;
3522 
3523 	if (sdkp->WCE && sdkp->media_present) {
3524 		sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
3525 		sd_sync_cache(sdkp, NULL);
3526 	}
3527 
3528 	if (system_state != SYSTEM_RESTART && sdkp->device->manage_start_stop) {
3529 		sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
3530 		sd_start_stop_device(sdkp, 0);
3531 	}
3532 }
3533 
3534 static int sd_suspend_common(struct device *dev, bool ignore_stop_errors)
3535 {
3536 	struct scsi_disk *sdkp = dev_get_drvdata(dev);
3537 	struct scsi_sense_hdr sshdr;
3538 	int ret = 0;
3539 
3540 	if (!sdkp)	/* E.g.: runtime suspend following sd_remove() */
3541 		return 0;
3542 
3543 	if (sdkp->WCE && sdkp->media_present) {
3544 		sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
3545 		ret = sd_sync_cache(sdkp, &sshdr);
3546 
3547 		if (ret) {
3548 			/* ignore OFFLINE device */
3549 			if (ret == -ENODEV)
3550 				return 0;
3551 
3552 			if (!scsi_sense_valid(&sshdr) ||
3553 			    sshdr.sense_key != ILLEGAL_REQUEST)
3554 				return ret;
3555 
3556 			/*
3557 			 * sshdr.sense_key == ILLEGAL_REQUEST means this drive
3558 			 * doesn't support sync. There's not much to do and
3559 			 * suspend shouldn't fail.
3560 			 */
3561 			ret = 0;
3562 		}
3563 	}
3564 
3565 	if (sdkp->device->manage_start_stop) {
3566 		sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
3567 		/* an error is not worth aborting a system sleep */
3568 		ret = sd_start_stop_device(sdkp, 0);
3569 		if (ignore_stop_errors)
3570 			ret = 0;
3571 	}
3572 
3573 	return ret;
3574 }
3575 
3576 static int sd_suspend_system(struct device *dev)
3577 {
3578 	return sd_suspend_common(dev, true);
3579 }
3580 
3581 static int sd_suspend_runtime(struct device *dev)
3582 {
3583 	return sd_suspend_common(dev, false);
3584 }
3585 
3586 static int sd_resume(struct device *dev)
3587 {
3588 	struct scsi_disk *sdkp = dev_get_drvdata(dev);
3589 	int ret;
3590 
3591 	if (!sdkp)	/* E.g.: runtime resume at the start of sd_probe() */
3592 		return 0;
3593 
3594 	if (!sdkp->device->manage_start_stop)
3595 		return 0;
3596 
3597 	sd_printk(KERN_NOTICE, sdkp, "Starting disk\n");
3598 	ret = sd_start_stop_device(sdkp, 1);
3599 	if (!ret)
3600 		opal_unlock_from_suspend(sdkp->opal_dev);
3601 	return ret;
3602 }
3603 
3604 /**
3605  *	init_sd - entry point for this driver (both when built in or when
3606  *	a module).
3607  *
3608  *	Note: this function registers this driver with the scsi mid-level.
3609  **/
3610 static int __init init_sd(void)
3611 {
3612 	int majors = 0, i, err;
3613 
3614 	SCSI_LOG_HLQUEUE(3, printk("init_sd: sd driver entry point\n"));
3615 
3616 	for (i = 0; i < SD_MAJORS; i++) {
3617 		if (register_blkdev(sd_major(i), "sd") != 0)
3618 			continue;
3619 		majors++;
3620 		blk_register_region(sd_major(i), SD_MINORS, NULL,
3621 				    sd_default_probe, NULL, NULL);
3622 	}
3623 
3624 	if (!majors)
3625 		return -ENODEV;
3626 
3627 	err = class_register(&sd_disk_class);
3628 	if (err)
3629 		goto err_out;
3630 
3631 	sd_cdb_cache = kmem_cache_create("sd_ext_cdb", SD_EXT_CDB_SIZE,
3632 					 0, 0, NULL);
3633 	if (!sd_cdb_cache) {
3634 		printk(KERN_ERR "sd: can't init extended cdb cache\n");
3635 		err = -ENOMEM;
3636 		goto err_out_class;
3637 	}
3638 
3639 	sd_cdb_pool = mempool_create_slab_pool(SD_MEMPOOL_SIZE, sd_cdb_cache);
3640 	if (!sd_cdb_pool) {
3641 		printk(KERN_ERR "sd: can't init extended cdb pool\n");
3642 		err = -ENOMEM;
3643 		goto err_out_cache;
3644 	}
3645 
3646 	err = scsi_register_driver(&sd_template.gendrv);
3647 	if (err)
3648 		goto err_out_driver;
3649 
3650 	return 0;
3651 
3652 err_out_driver:
3653 	mempool_destroy(sd_cdb_pool);
3654 
3655 err_out_cache:
3656 	kmem_cache_destroy(sd_cdb_cache);
3657 
3658 err_out_class:
3659 	class_unregister(&sd_disk_class);
3660 err_out:
3661 	for (i = 0; i < SD_MAJORS; i++)
3662 		unregister_blkdev(sd_major(i), "sd");
3663 	return err;
3664 }
3665 
3666 /**
3667  *	exit_sd - exit point for this driver (when it is a module).
3668  *
3669  *	Note: this function unregisters this driver from the scsi mid-level.
3670  **/
3671 static void __exit exit_sd(void)
3672 {
3673 	int i;
3674 
3675 	SCSI_LOG_HLQUEUE(3, printk("exit_sd: exiting sd driver\n"));
3676 
3677 	scsi_unregister_driver(&sd_template.gendrv);
3678 	mempool_destroy(sd_cdb_pool);
3679 	kmem_cache_destroy(sd_cdb_cache);
3680 
3681 	class_unregister(&sd_disk_class);
3682 
3683 	for (i = 0; i < SD_MAJORS; i++) {
3684 		blk_unregister_region(sd_major(i), SD_MINORS);
3685 		unregister_blkdev(sd_major(i), "sd");
3686 	}
3687 }
3688 
3689 module_init(init_sd);
3690 module_exit(exit_sd);
3691 
3692 static void sd_print_sense_hdr(struct scsi_disk *sdkp,
3693 			       struct scsi_sense_hdr *sshdr)
3694 {
3695 	scsi_print_sense_hdr(sdkp->device,
3696 			     sdkp->disk ? sdkp->disk->disk_name : NULL, sshdr);
3697 }
3698 
3699 static void sd_print_result(const struct scsi_disk *sdkp, const char *msg,
3700 			    int result)
3701 {
3702 	const char *hb_string = scsi_hostbyte_string(result);
3703 	const char *db_string = scsi_driverbyte_string(result);
3704 
3705 	if (hb_string || db_string)
3706 		sd_printk(KERN_INFO, sdkp,
3707 			  "%s: Result: hostbyte=%s driverbyte=%s\n", msg,
3708 			  hb_string ? hb_string : "invalid",
3709 			  db_string ? db_string : "invalid");
3710 	else
3711 		sd_printk(KERN_INFO, sdkp,
3712 			  "%s: Result: hostbyte=0x%02x driverbyte=0x%02x\n",
3713 			  msg, host_byte(result), driver_byte(result));
3714 }
3715 
3716