1 /* 2 * sd.c Copyright (C) 1992 Drew Eckhardt 3 * Copyright (C) 1993, 1994, 1995, 1999 Eric Youngdale 4 * 5 * Linux scsi disk driver 6 * Initial versions: Drew Eckhardt 7 * Subsequent revisions: Eric Youngdale 8 * Modification history: 9 * - Drew Eckhardt <drew@colorado.edu> original 10 * - Eric Youngdale <eric@andante.org> add scatter-gather, multiple 11 * outstanding request, and other enhancements. 12 * Support loadable low-level scsi drivers. 13 * - Jirka Hanika <geo@ff.cuni.cz> support more scsi disks using 14 * eight major numbers. 15 * - Richard Gooch <rgooch@atnf.csiro.au> support devfs. 16 * - Torben Mathiasen <tmm@image.dk> Resource allocation fixes in 17 * sd_init and cleanups. 18 * - Alex Davis <letmein@erols.com> Fix problem where partition info 19 * not being read in sd_open. Fix problem where removable media 20 * could be ejected after sd_open. 21 * - Douglas Gilbert <dgilbert@interlog.com> cleanup for lk 2.5.x 22 * - Badari Pulavarty <pbadari@us.ibm.com>, Matthew Wilcox 23 * <willy@debian.org>, Kurt Garloff <garloff@suse.de>: 24 * Support 32k/1M disks. 25 * 26 * Logging policy (needs CONFIG_SCSI_LOGGING defined): 27 * - setting up transfer: SCSI_LOG_HLQUEUE levels 1 and 2 28 * - end of transfer (bh + scsi_lib): SCSI_LOG_HLCOMPLETE level 1 29 * - entering sd_ioctl: SCSI_LOG_IOCTL level 1 30 * - entering other commands: SCSI_LOG_HLQUEUE level 3 31 * Note: when the logging level is set by the user, it must be greater 32 * than the level indicated above to trigger output. 33 */ 34 35 #include <linux/module.h> 36 #include <linux/fs.h> 37 #include <linux/kernel.h> 38 #include <linux/mm.h> 39 #include <linux/bio.h> 40 #include <linux/genhd.h> 41 #include <linux/hdreg.h> 42 #include <linux/errno.h> 43 #include <linux/idr.h> 44 #include <linux/interrupt.h> 45 #include <linux/init.h> 46 #include <linux/blkdev.h> 47 #include <linux/blkpg.h> 48 #include <linux/blk-pm.h> 49 #include <linux/delay.h> 50 #include <linux/mutex.h> 51 #include <linux/string_helpers.h> 52 #include <linux/async.h> 53 #include <linux/slab.h> 54 #include <linux/sed-opal.h> 55 #include <linux/pm_runtime.h> 56 #include <linux/pr.h> 57 #include <linux/t10-pi.h> 58 #include <linux/uaccess.h> 59 #include <asm/unaligned.h> 60 61 #include <scsi/scsi.h> 62 #include <scsi/scsi_cmnd.h> 63 #include <scsi/scsi_dbg.h> 64 #include <scsi/scsi_device.h> 65 #include <scsi/scsi_driver.h> 66 #include <scsi/scsi_eh.h> 67 #include <scsi/scsi_host.h> 68 #include <scsi/scsi_ioctl.h> 69 #include <scsi/scsicam.h> 70 71 #include "sd.h" 72 #include "scsi_priv.h" 73 #include "scsi_logging.h" 74 75 MODULE_AUTHOR("Eric Youngdale"); 76 MODULE_DESCRIPTION("SCSI disk (sd) driver"); 77 MODULE_LICENSE("GPL"); 78 79 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK0_MAJOR); 80 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK1_MAJOR); 81 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK2_MAJOR); 82 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK3_MAJOR); 83 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK4_MAJOR); 84 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK5_MAJOR); 85 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK6_MAJOR); 86 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK7_MAJOR); 87 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK8_MAJOR); 88 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK9_MAJOR); 89 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK10_MAJOR); 90 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK11_MAJOR); 91 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK12_MAJOR); 92 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK13_MAJOR); 93 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK14_MAJOR); 94 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK15_MAJOR); 95 MODULE_ALIAS_SCSI_DEVICE(TYPE_DISK); 96 MODULE_ALIAS_SCSI_DEVICE(TYPE_MOD); 97 MODULE_ALIAS_SCSI_DEVICE(TYPE_RBC); 98 MODULE_ALIAS_SCSI_DEVICE(TYPE_ZBC); 99 100 #if !defined(CONFIG_DEBUG_BLOCK_EXT_DEVT) 101 #define SD_MINORS 16 102 #else 103 #define SD_MINORS 0 104 #endif 105 106 static void sd_config_discard(struct scsi_disk *, unsigned int); 107 static void sd_config_write_same(struct scsi_disk *); 108 static int sd_revalidate_disk(struct gendisk *); 109 static void sd_unlock_native_capacity(struct gendisk *disk); 110 static int sd_probe(struct device *); 111 static int sd_remove(struct device *); 112 static void sd_shutdown(struct device *); 113 static int sd_suspend_system(struct device *); 114 static int sd_suspend_runtime(struct device *); 115 static int sd_resume(struct device *); 116 static void sd_rescan(struct device *); 117 static blk_status_t sd_init_command(struct scsi_cmnd *SCpnt); 118 static void sd_uninit_command(struct scsi_cmnd *SCpnt); 119 static int sd_done(struct scsi_cmnd *); 120 static void sd_eh_reset(struct scsi_cmnd *); 121 static int sd_eh_action(struct scsi_cmnd *, int); 122 static void sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer); 123 static void scsi_disk_release(struct device *cdev); 124 static void sd_print_sense_hdr(struct scsi_disk *, struct scsi_sense_hdr *); 125 static void sd_print_result(const struct scsi_disk *, const char *, int); 126 127 static DEFINE_IDA(sd_index_ida); 128 129 /* This semaphore is used to mediate the 0->1 reference get in the 130 * face of object destruction (i.e. we can't allow a get on an 131 * object after last put) */ 132 static DEFINE_MUTEX(sd_ref_mutex); 133 134 static struct kmem_cache *sd_cdb_cache; 135 static mempool_t *sd_cdb_pool; 136 static mempool_t *sd_page_pool; 137 138 static const char *sd_cache_types[] = { 139 "write through", "none", "write back", 140 "write back, no read (daft)" 141 }; 142 143 static void sd_set_flush_flag(struct scsi_disk *sdkp) 144 { 145 bool wc = false, fua = false; 146 147 if (sdkp->WCE) { 148 wc = true; 149 if (sdkp->DPOFUA) 150 fua = true; 151 } 152 153 blk_queue_write_cache(sdkp->disk->queue, wc, fua); 154 } 155 156 static ssize_t 157 cache_type_store(struct device *dev, struct device_attribute *attr, 158 const char *buf, size_t count) 159 { 160 int ct, rcd, wce, sp; 161 struct scsi_disk *sdkp = to_scsi_disk(dev); 162 struct scsi_device *sdp = sdkp->device; 163 char buffer[64]; 164 char *buffer_data; 165 struct scsi_mode_data data; 166 struct scsi_sense_hdr sshdr; 167 static const char temp[] = "temporary "; 168 int len; 169 170 if (sdp->type != TYPE_DISK && sdp->type != TYPE_ZBC) 171 /* no cache control on RBC devices; theoretically they 172 * can do it, but there's probably so many exceptions 173 * it's not worth the risk */ 174 return -EINVAL; 175 176 if (strncmp(buf, temp, sizeof(temp) - 1) == 0) { 177 buf += sizeof(temp) - 1; 178 sdkp->cache_override = 1; 179 } else { 180 sdkp->cache_override = 0; 181 } 182 183 ct = sysfs_match_string(sd_cache_types, buf); 184 if (ct < 0) 185 return -EINVAL; 186 187 rcd = ct & 0x01 ? 1 : 0; 188 wce = (ct & 0x02) && !sdkp->write_prot ? 1 : 0; 189 190 if (sdkp->cache_override) { 191 sdkp->WCE = wce; 192 sdkp->RCD = rcd; 193 sd_set_flush_flag(sdkp); 194 return count; 195 } 196 197 if (scsi_mode_sense(sdp, 0x08, 8, buffer, sizeof(buffer), SD_TIMEOUT, 198 SD_MAX_RETRIES, &data, NULL)) 199 return -EINVAL; 200 len = min_t(size_t, sizeof(buffer), data.length - data.header_length - 201 data.block_descriptor_length); 202 buffer_data = buffer + data.header_length + 203 data.block_descriptor_length; 204 buffer_data[2] &= ~0x05; 205 buffer_data[2] |= wce << 2 | rcd; 206 sp = buffer_data[0] & 0x80 ? 1 : 0; 207 buffer_data[0] &= ~0x80; 208 209 /* 210 * Ensure WP, DPOFUA, and RESERVED fields are cleared in 211 * received mode parameter buffer before doing MODE SELECT. 212 */ 213 data.device_specific = 0; 214 215 if (scsi_mode_select(sdp, 1, sp, 8, buffer_data, len, SD_TIMEOUT, 216 SD_MAX_RETRIES, &data, &sshdr)) { 217 if (scsi_sense_valid(&sshdr)) 218 sd_print_sense_hdr(sdkp, &sshdr); 219 return -EINVAL; 220 } 221 revalidate_disk(sdkp->disk); 222 return count; 223 } 224 225 static ssize_t 226 manage_start_stop_show(struct device *dev, struct device_attribute *attr, 227 char *buf) 228 { 229 struct scsi_disk *sdkp = to_scsi_disk(dev); 230 struct scsi_device *sdp = sdkp->device; 231 232 return sprintf(buf, "%u\n", sdp->manage_start_stop); 233 } 234 235 static ssize_t 236 manage_start_stop_store(struct device *dev, struct device_attribute *attr, 237 const char *buf, size_t count) 238 { 239 struct scsi_disk *sdkp = to_scsi_disk(dev); 240 struct scsi_device *sdp = sdkp->device; 241 bool v; 242 243 if (!capable(CAP_SYS_ADMIN)) 244 return -EACCES; 245 246 if (kstrtobool(buf, &v)) 247 return -EINVAL; 248 249 sdp->manage_start_stop = v; 250 251 return count; 252 } 253 static DEVICE_ATTR_RW(manage_start_stop); 254 255 static ssize_t 256 allow_restart_show(struct device *dev, struct device_attribute *attr, char *buf) 257 { 258 struct scsi_disk *sdkp = to_scsi_disk(dev); 259 260 return sprintf(buf, "%u\n", sdkp->device->allow_restart); 261 } 262 263 static ssize_t 264 allow_restart_store(struct device *dev, struct device_attribute *attr, 265 const char *buf, size_t count) 266 { 267 bool v; 268 struct scsi_disk *sdkp = to_scsi_disk(dev); 269 struct scsi_device *sdp = sdkp->device; 270 271 if (!capable(CAP_SYS_ADMIN)) 272 return -EACCES; 273 274 if (sdp->type != TYPE_DISK && sdp->type != TYPE_ZBC) 275 return -EINVAL; 276 277 if (kstrtobool(buf, &v)) 278 return -EINVAL; 279 280 sdp->allow_restart = v; 281 282 return count; 283 } 284 static DEVICE_ATTR_RW(allow_restart); 285 286 static ssize_t 287 cache_type_show(struct device *dev, struct device_attribute *attr, char *buf) 288 { 289 struct scsi_disk *sdkp = to_scsi_disk(dev); 290 int ct = sdkp->RCD + 2*sdkp->WCE; 291 292 return sprintf(buf, "%s\n", sd_cache_types[ct]); 293 } 294 static DEVICE_ATTR_RW(cache_type); 295 296 static ssize_t 297 FUA_show(struct device *dev, struct device_attribute *attr, char *buf) 298 { 299 struct scsi_disk *sdkp = to_scsi_disk(dev); 300 301 return sprintf(buf, "%u\n", sdkp->DPOFUA); 302 } 303 static DEVICE_ATTR_RO(FUA); 304 305 static ssize_t 306 protection_type_show(struct device *dev, struct device_attribute *attr, 307 char *buf) 308 { 309 struct scsi_disk *sdkp = to_scsi_disk(dev); 310 311 return sprintf(buf, "%u\n", sdkp->protection_type); 312 } 313 314 static ssize_t 315 protection_type_store(struct device *dev, struct device_attribute *attr, 316 const char *buf, size_t count) 317 { 318 struct scsi_disk *sdkp = to_scsi_disk(dev); 319 unsigned int val; 320 int err; 321 322 if (!capable(CAP_SYS_ADMIN)) 323 return -EACCES; 324 325 err = kstrtouint(buf, 10, &val); 326 327 if (err) 328 return err; 329 330 if (val <= T10_PI_TYPE3_PROTECTION) 331 sdkp->protection_type = val; 332 333 return count; 334 } 335 static DEVICE_ATTR_RW(protection_type); 336 337 static ssize_t 338 protection_mode_show(struct device *dev, struct device_attribute *attr, 339 char *buf) 340 { 341 struct scsi_disk *sdkp = to_scsi_disk(dev); 342 struct scsi_device *sdp = sdkp->device; 343 unsigned int dif, dix; 344 345 dif = scsi_host_dif_capable(sdp->host, sdkp->protection_type); 346 dix = scsi_host_dix_capable(sdp->host, sdkp->protection_type); 347 348 if (!dix && scsi_host_dix_capable(sdp->host, T10_PI_TYPE0_PROTECTION)) { 349 dif = 0; 350 dix = 1; 351 } 352 353 if (!dif && !dix) 354 return sprintf(buf, "none\n"); 355 356 return sprintf(buf, "%s%u\n", dix ? "dix" : "dif", dif); 357 } 358 static DEVICE_ATTR_RO(protection_mode); 359 360 static ssize_t 361 app_tag_own_show(struct device *dev, struct device_attribute *attr, char *buf) 362 { 363 struct scsi_disk *sdkp = to_scsi_disk(dev); 364 365 return sprintf(buf, "%u\n", sdkp->ATO); 366 } 367 static DEVICE_ATTR_RO(app_tag_own); 368 369 static ssize_t 370 thin_provisioning_show(struct device *dev, struct device_attribute *attr, 371 char *buf) 372 { 373 struct scsi_disk *sdkp = to_scsi_disk(dev); 374 375 return sprintf(buf, "%u\n", sdkp->lbpme); 376 } 377 static DEVICE_ATTR_RO(thin_provisioning); 378 379 /* sysfs_match_string() requires dense arrays */ 380 static const char *lbp_mode[] = { 381 [SD_LBP_FULL] = "full", 382 [SD_LBP_UNMAP] = "unmap", 383 [SD_LBP_WS16] = "writesame_16", 384 [SD_LBP_WS10] = "writesame_10", 385 [SD_LBP_ZERO] = "writesame_zero", 386 [SD_LBP_DISABLE] = "disabled", 387 }; 388 389 static ssize_t 390 provisioning_mode_show(struct device *dev, struct device_attribute *attr, 391 char *buf) 392 { 393 struct scsi_disk *sdkp = to_scsi_disk(dev); 394 395 return sprintf(buf, "%s\n", lbp_mode[sdkp->provisioning_mode]); 396 } 397 398 static ssize_t 399 provisioning_mode_store(struct device *dev, struct device_attribute *attr, 400 const char *buf, size_t count) 401 { 402 struct scsi_disk *sdkp = to_scsi_disk(dev); 403 struct scsi_device *sdp = sdkp->device; 404 int mode; 405 406 if (!capable(CAP_SYS_ADMIN)) 407 return -EACCES; 408 409 if (sd_is_zoned(sdkp)) { 410 sd_config_discard(sdkp, SD_LBP_DISABLE); 411 return count; 412 } 413 414 if (sdp->type != TYPE_DISK) 415 return -EINVAL; 416 417 mode = sysfs_match_string(lbp_mode, buf); 418 if (mode < 0) 419 return -EINVAL; 420 421 sd_config_discard(sdkp, mode); 422 423 return count; 424 } 425 static DEVICE_ATTR_RW(provisioning_mode); 426 427 /* sysfs_match_string() requires dense arrays */ 428 static const char *zeroing_mode[] = { 429 [SD_ZERO_WRITE] = "write", 430 [SD_ZERO_WS] = "writesame", 431 [SD_ZERO_WS16_UNMAP] = "writesame_16_unmap", 432 [SD_ZERO_WS10_UNMAP] = "writesame_10_unmap", 433 }; 434 435 static ssize_t 436 zeroing_mode_show(struct device *dev, struct device_attribute *attr, 437 char *buf) 438 { 439 struct scsi_disk *sdkp = to_scsi_disk(dev); 440 441 return sprintf(buf, "%s\n", zeroing_mode[sdkp->zeroing_mode]); 442 } 443 444 static ssize_t 445 zeroing_mode_store(struct device *dev, struct device_attribute *attr, 446 const char *buf, size_t count) 447 { 448 struct scsi_disk *sdkp = to_scsi_disk(dev); 449 int mode; 450 451 if (!capable(CAP_SYS_ADMIN)) 452 return -EACCES; 453 454 mode = sysfs_match_string(zeroing_mode, buf); 455 if (mode < 0) 456 return -EINVAL; 457 458 sdkp->zeroing_mode = mode; 459 460 return count; 461 } 462 static DEVICE_ATTR_RW(zeroing_mode); 463 464 static ssize_t 465 max_medium_access_timeouts_show(struct device *dev, 466 struct device_attribute *attr, char *buf) 467 { 468 struct scsi_disk *sdkp = to_scsi_disk(dev); 469 470 return sprintf(buf, "%u\n", sdkp->max_medium_access_timeouts); 471 } 472 473 static ssize_t 474 max_medium_access_timeouts_store(struct device *dev, 475 struct device_attribute *attr, const char *buf, 476 size_t count) 477 { 478 struct scsi_disk *sdkp = to_scsi_disk(dev); 479 int err; 480 481 if (!capable(CAP_SYS_ADMIN)) 482 return -EACCES; 483 484 err = kstrtouint(buf, 10, &sdkp->max_medium_access_timeouts); 485 486 return err ? err : count; 487 } 488 static DEVICE_ATTR_RW(max_medium_access_timeouts); 489 490 static ssize_t 491 max_write_same_blocks_show(struct device *dev, struct device_attribute *attr, 492 char *buf) 493 { 494 struct scsi_disk *sdkp = to_scsi_disk(dev); 495 496 return sprintf(buf, "%u\n", sdkp->max_ws_blocks); 497 } 498 499 static ssize_t 500 max_write_same_blocks_store(struct device *dev, struct device_attribute *attr, 501 const char *buf, size_t count) 502 { 503 struct scsi_disk *sdkp = to_scsi_disk(dev); 504 struct scsi_device *sdp = sdkp->device; 505 unsigned long max; 506 int err; 507 508 if (!capable(CAP_SYS_ADMIN)) 509 return -EACCES; 510 511 if (sdp->type != TYPE_DISK && sdp->type != TYPE_ZBC) 512 return -EINVAL; 513 514 err = kstrtoul(buf, 10, &max); 515 516 if (err) 517 return err; 518 519 if (max == 0) 520 sdp->no_write_same = 1; 521 else if (max <= SD_MAX_WS16_BLOCKS) { 522 sdp->no_write_same = 0; 523 sdkp->max_ws_blocks = max; 524 } 525 526 sd_config_write_same(sdkp); 527 528 return count; 529 } 530 static DEVICE_ATTR_RW(max_write_same_blocks); 531 532 static struct attribute *sd_disk_attrs[] = { 533 &dev_attr_cache_type.attr, 534 &dev_attr_FUA.attr, 535 &dev_attr_allow_restart.attr, 536 &dev_attr_manage_start_stop.attr, 537 &dev_attr_protection_type.attr, 538 &dev_attr_protection_mode.attr, 539 &dev_attr_app_tag_own.attr, 540 &dev_attr_thin_provisioning.attr, 541 &dev_attr_provisioning_mode.attr, 542 &dev_attr_zeroing_mode.attr, 543 &dev_attr_max_write_same_blocks.attr, 544 &dev_attr_max_medium_access_timeouts.attr, 545 NULL, 546 }; 547 ATTRIBUTE_GROUPS(sd_disk); 548 549 static struct class sd_disk_class = { 550 .name = "scsi_disk", 551 .owner = THIS_MODULE, 552 .dev_release = scsi_disk_release, 553 .dev_groups = sd_disk_groups, 554 }; 555 556 static const struct dev_pm_ops sd_pm_ops = { 557 .suspend = sd_suspend_system, 558 .resume = sd_resume, 559 .poweroff = sd_suspend_system, 560 .restore = sd_resume, 561 .runtime_suspend = sd_suspend_runtime, 562 .runtime_resume = sd_resume, 563 }; 564 565 static struct scsi_driver sd_template = { 566 .gendrv = { 567 .name = "sd", 568 .owner = THIS_MODULE, 569 .probe = sd_probe, 570 .remove = sd_remove, 571 .shutdown = sd_shutdown, 572 .pm = &sd_pm_ops, 573 }, 574 .rescan = sd_rescan, 575 .init_command = sd_init_command, 576 .uninit_command = sd_uninit_command, 577 .done = sd_done, 578 .eh_action = sd_eh_action, 579 .eh_reset = sd_eh_reset, 580 }; 581 582 /* 583 * Dummy kobj_map->probe function. 584 * The default ->probe function will call modprobe, which is 585 * pointless as this module is already loaded. 586 */ 587 static struct kobject *sd_default_probe(dev_t devt, int *partno, void *data) 588 { 589 return NULL; 590 } 591 592 /* 593 * Device no to disk mapping: 594 * 595 * major disc2 disc p1 596 * |............|.............|....|....| <- dev_t 597 * 31 20 19 8 7 4 3 0 598 * 599 * Inside a major, we have 16k disks, however mapped non- 600 * contiguously. The first 16 disks are for major0, the next 601 * ones with major1, ... Disk 256 is for major0 again, disk 272 602 * for major1, ... 603 * As we stay compatible with our numbering scheme, we can reuse 604 * the well-know SCSI majors 8, 65--71, 136--143. 605 */ 606 static int sd_major(int major_idx) 607 { 608 switch (major_idx) { 609 case 0: 610 return SCSI_DISK0_MAJOR; 611 case 1 ... 7: 612 return SCSI_DISK1_MAJOR + major_idx - 1; 613 case 8 ... 15: 614 return SCSI_DISK8_MAJOR + major_idx - 8; 615 default: 616 BUG(); 617 return 0; /* shut up gcc */ 618 } 619 } 620 621 static struct scsi_disk *scsi_disk_get(struct gendisk *disk) 622 { 623 struct scsi_disk *sdkp = NULL; 624 625 mutex_lock(&sd_ref_mutex); 626 627 if (disk->private_data) { 628 sdkp = scsi_disk(disk); 629 if (scsi_device_get(sdkp->device) == 0) 630 get_device(&sdkp->dev); 631 else 632 sdkp = NULL; 633 } 634 mutex_unlock(&sd_ref_mutex); 635 return sdkp; 636 } 637 638 static void scsi_disk_put(struct scsi_disk *sdkp) 639 { 640 struct scsi_device *sdev = sdkp->device; 641 642 mutex_lock(&sd_ref_mutex); 643 put_device(&sdkp->dev); 644 scsi_device_put(sdev); 645 mutex_unlock(&sd_ref_mutex); 646 } 647 648 #ifdef CONFIG_BLK_SED_OPAL 649 static int sd_sec_submit(void *data, u16 spsp, u8 secp, void *buffer, 650 size_t len, bool send) 651 { 652 struct scsi_device *sdev = data; 653 u8 cdb[12] = { 0, }; 654 int ret; 655 656 cdb[0] = send ? SECURITY_PROTOCOL_OUT : SECURITY_PROTOCOL_IN; 657 cdb[1] = secp; 658 put_unaligned_be16(spsp, &cdb[2]); 659 put_unaligned_be32(len, &cdb[6]); 660 661 ret = scsi_execute_req(sdev, cdb, 662 send ? DMA_TO_DEVICE : DMA_FROM_DEVICE, 663 buffer, len, NULL, SD_TIMEOUT, SD_MAX_RETRIES, NULL); 664 return ret <= 0 ? ret : -EIO; 665 } 666 #endif /* CONFIG_BLK_SED_OPAL */ 667 668 /* 669 * Look up the DIX operation based on whether the command is read or 670 * write and whether dix and dif are enabled. 671 */ 672 static unsigned int sd_prot_op(bool write, bool dix, bool dif) 673 { 674 /* Lookup table: bit 2 (write), bit 1 (dix), bit 0 (dif) */ 675 static const unsigned int ops[] = { /* wrt dix dif */ 676 SCSI_PROT_NORMAL, /* 0 0 0 */ 677 SCSI_PROT_READ_STRIP, /* 0 0 1 */ 678 SCSI_PROT_READ_INSERT, /* 0 1 0 */ 679 SCSI_PROT_READ_PASS, /* 0 1 1 */ 680 SCSI_PROT_NORMAL, /* 1 0 0 */ 681 SCSI_PROT_WRITE_INSERT, /* 1 0 1 */ 682 SCSI_PROT_WRITE_STRIP, /* 1 1 0 */ 683 SCSI_PROT_WRITE_PASS, /* 1 1 1 */ 684 }; 685 686 return ops[write << 2 | dix << 1 | dif]; 687 } 688 689 /* 690 * Returns a mask of the protection flags that are valid for a given DIX 691 * operation. 692 */ 693 static unsigned int sd_prot_flag_mask(unsigned int prot_op) 694 { 695 static const unsigned int flag_mask[] = { 696 [SCSI_PROT_NORMAL] = 0, 697 698 [SCSI_PROT_READ_STRIP] = SCSI_PROT_TRANSFER_PI | 699 SCSI_PROT_GUARD_CHECK | 700 SCSI_PROT_REF_CHECK | 701 SCSI_PROT_REF_INCREMENT, 702 703 [SCSI_PROT_READ_INSERT] = SCSI_PROT_REF_INCREMENT | 704 SCSI_PROT_IP_CHECKSUM, 705 706 [SCSI_PROT_READ_PASS] = SCSI_PROT_TRANSFER_PI | 707 SCSI_PROT_GUARD_CHECK | 708 SCSI_PROT_REF_CHECK | 709 SCSI_PROT_REF_INCREMENT | 710 SCSI_PROT_IP_CHECKSUM, 711 712 [SCSI_PROT_WRITE_INSERT] = SCSI_PROT_TRANSFER_PI | 713 SCSI_PROT_REF_INCREMENT, 714 715 [SCSI_PROT_WRITE_STRIP] = SCSI_PROT_GUARD_CHECK | 716 SCSI_PROT_REF_CHECK | 717 SCSI_PROT_REF_INCREMENT | 718 SCSI_PROT_IP_CHECKSUM, 719 720 [SCSI_PROT_WRITE_PASS] = SCSI_PROT_TRANSFER_PI | 721 SCSI_PROT_GUARD_CHECK | 722 SCSI_PROT_REF_CHECK | 723 SCSI_PROT_REF_INCREMENT | 724 SCSI_PROT_IP_CHECKSUM, 725 }; 726 727 return flag_mask[prot_op]; 728 } 729 730 static unsigned char sd_setup_protect_cmnd(struct scsi_cmnd *scmd, 731 unsigned int dix, unsigned int dif) 732 { 733 struct bio *bio = scmd->request->bio; 734 unsigned int prot_op = sd_prot_op(rq_data_dir(scmd->request), dix, dif); 735 unsigned int protect = 0; 736 737 if (dix) { /* DIX Type 0, 1, 2, 3 */ 738 if (bio_integrity_flagged(bio, BIP_IP_CHECKSUM)) 739 scmd->prot_flags |= SCSI_PROT_IP_CHECKSUM; 740 741 if (bio_integrity_flagged(bio, BIP_CTRL_NOCHECK) == false) 742 scmd->prot_flags |= SCSI_PROT_GUARD_CHECK; 743 } 744 745 if (dif != T10_PI_TYPE3_PROTECTION) { /* DIX/DIF Type 0, 1, 2 */ 746 scmd->prot_flags |= SCSI_PROT_REF_INCREMENT; 747 748 if (bio_integrity_flagged(bio, BIP_CTRL_NOCHECK) == false) 749 scmd->prot_flags |= SCSI_PROT_REF_CHECK; 750 } 751 752 if (dif) { /* DIX/DIF Type 1, 2, 3 */ 753 scmd->prot_flags |= SCSI_PROT_TRANSFER_PI; 754 755 if (bio_integrity_flagged(bio, BIP_DISK_NOCHECK)) 756 protect = 3 << 5; /* Disable target PI checking */ 757 else 758 protect = 1 << 5; /* Enable target PI checking */ 759 } 760 761 scsi_set_prot_op(scmd, prot_op); 762 scsi_set_prot_type(scmd, dif); 763 scmd->prot_flags &= sd_prot_flag_mask(prot_op); 764 765 return protect; 766 } 767 768 static void sd_config_discard(struct scsi_disk *sdkp, unsigned int mode) 769 { 770 struct request_queue *q = sdkp->disk->queue; 771 unsigned int logical_block_size = sdkp->device->sector_size; 772 unsigned int max_blocks = 0; 773 774 q->limits.discard_alignment = 775 sdkp->unmap_alignment * logical_block_size; 776 q->limits.discard_granularity = 777 max(sdkp->physical_block_size, 778 sdkp->unmap_granularity * logical_block_size); 779 sdkp->provisioning_mode = mode; 780 781 switch (mode) { 782 783 case SD_LBP_FULL: 784 case SD_LBP_DISABLE: 785 blk_queue_max_discard_sectors(q, 0); 786 blk_queue_flag_clear(QUEUE_FLAG_DISCARD, q); 787 return; 788 789 case SD_LBP_UNMAP: 790 max_blocks = min_not_zero(sdkp->max_unmap_blocks, 791 (u32)SD_MAX_WS16_BLOCKS); 792 break; 793 794 case SD_LBP_WS16: 795 if (sdkp->device->unmap_limit_for_ws) 796 max_blocks = sdkp->max_unmap_blocks; 797 else 798 max_blocks = sdkp->max_ws_blocks; 799 800 max_blocks = min_not_zero(max_blocks, (u32)SD_MAX_WS16_BLOCKS); 801 break; 802 803 case SD_LBP_WS10: 804 if (sdkp->device->unmap_limit_for_ws) 805 max_blocks = sdkp->max_unmap_blocks; 806 else 807 max_blocks = sdkp->max_ws_blocks; 808 809 max_blocks = min_not_zero(max_blocks, (u32)SD_MAX_WS10_BLOCKS); 810 break; 811 812 case SD_LBP_ZERO: 813 max_blocks = min_not_zero(sdkp->max_ws_blocks, 814 (u32)SD_MAX_WS10_BLOCKS); 815 break; 816 } 817 818 blk_queue_max_discard_sectors(q, max_blocks * (logical_block_size >> 9)); 819 blk_queue_flag_set(QUEUE_FLAG_DISCARD, q); 820 } 821 822 static blk_status_t sd_setup_unmap_cmnd(struct scsi_cmnd *cmd) 823 { 824 struct scsi_device *sdp = cmd->device; 825 struct request *rq = cmd->request; 826 u64 lba = sectors_to_logical(sdp, blk_rq_pos(rq)); 827 u32 nr_blocks = sectors_to_logical(sdp, blk_rq_sectors(rq)); 828 unsigned int data_len = 24; 829 char *buf; 830 831 rq->special_vec.bv_page = mempool_alloc(sd_page_pool, GFP_ATOMIC); 832 if (!rq->special_vec.bv_page) 833 return BLK_STS_RESOURCE; 834 clear_highpage(rq->special_vec.bv_page); 835 rq->special_vec.bv_offset = 0; 836 rq->special_vec.bv_len = data_len; 837 rq->rq_flags |= RQF_SPECIAL_PAYLOAD; 838 839 cmd->cmd_len = 10; 840 cmd->cmnd[0] = UNMAP; 841 cmd->cmnd[8] = 24; 842 843 buf = page_address(rq->special_vec.bv_page); 844 put_unaligned_be16(6 + 16, &buf[0]); 845 put_unaligned_be16(16, &buf[2]); 846 put_unaligned_be64(lba, &buf[8]); 847 put_unaligned_be32(nr_blocks, &buf[16]); 848 849 cmd->allowed = SD_MAX_RETRIES; 850 cmd->transfersize = data_len; 851 rq->timeout = SD_TIMEOUT; 852 853 return scsi_init_io(cmd); 854 } 855 856 static blk_status_t sd_setup_write_same16_cmnd(struct scsi_cmnd *cmd, 857 bool unmap) 858 { 859 struct scsi_device *sdp = cmd->device; 860 struct request *rq = cmd->request; 861 u64 lba = sectors_to_logical(sdp, blk_rq_pos(rq)); 862 u32 nr_blocks = sectors_to_logical(sdp, blk_rq_sectors(rq)); 863 u32 data_len = sdp->sector_size; 864 865 rq->special_vec.bv_page = mempool_alloc(sd_page_pool, GFP_ATOMIC); 866 if (!rq->special_vec.bv_page) 867 return BLK_STS_RESOURCE; 868 clear_highpage(rq->special_vec.bv_page); 869 rq->special_vec.bv_offset = 0; 870 rq->special_vec.bv_len = data_len; 871 rq->rq_flags |= RQF_SPECIAL_PAYLOAD; 872 873 cmd->cmd_len = 16; 874 cmd->cmnd[0] = WRITE_SAME_16; 875 if (unmap) 876 cmd->cmnd[1] = 0x8; /* UNMAP */ 877 put_unaligned_be64(lba, &cmd->cmnd[2]); 878 put_unaligned_be32(nr_blocks, &cmd->cmnd[10]); 879 880 cmd->allowed = SD_MAX_RETRIES; 881 cmd->transfersize = data_len; 882 rq->timeout = unmap ? SD_TIMEOUT : SD_WRITE_SAME_TIMEOUT; 883 884 return scsi_init_io(cmd); 885 } 886 887 static blk_status_t sd_setup_write_same10_cmnd(struct scsi_cmnd *cmd, 888 bool unmap) 889 { 890 struct scsi_device *sdp = cmd->device; 891 struct request *rq = cmd->request; 892 u64 lba = sectors_to_logical(sdp, blk_rq_pos(rq)); 893 u32 nr_blocks = sectors_to_logical(sdp, blk_rq_sectors(rq)); 894 u32 data_len = sdp->sector_size; 895 896 rq->special_vec.bv_page = mempool_alloc(sd_page_pool, GFP_ATOMIC); 897 if (!rq->special_vec.bv_page) 898 return BLK_STS_RESOURCE; 899 clear_highpage(rq->special_vec.bv_page); 900 rq->special_vec.bv_offset = 0; 901 rq->special_vec.bv_len = data_len; 902 rq->rq_flags |= RQF_SPECIAL_PAYLOAD; 903 904 cmd->cmd_len = 10; 905 cmd->cmnd[0] = WRITE_SAME; 906 if (unmap) 907 cmd->cmnd[1] = 0x8; /* UNMAP */ 908 put_unaligned_be32(lba, &cmd->cmnd[2]); 909 put_unaligned_be16(nr_blocks, &cmd->cmnd[7]); 910 911 cmd->allowed = SD_MAX_RETRIES; 912 cmd->transfersize = data_len; 913 rq->timeout = unmap ? SD_TIMEOUT : SD_WRITE_SAME_TIMEOUT; 914 915 return scsi_init_io(cmd); 916 } 917 918 static blk_status_t sd_setup_write_zeroes_cmnd(struct scsi_cmnd *cmd) 919 { 920 struct request *rq = cmd->request; 921 struct scsi_device *sdp = cmd->device; 922 struct scsi_disk *sdkp = scsi_disk(rq->rq_disk); 923 u64 lba = sectors_to_logical(sdp, blk_rq_pos(rq)); 924 u32 nr_blocks = sectors_to_logical(sdp, blk_rq_sectors(rq)); 925 926 if (!(rq->cmd_flags & REQ_NOUNMAP)) { 927 switch (sdkp->zeroing_mode) { 928 case SD_ZERO_WS16_UNMAP: 929 return sd_setup_write_same16_cmnd(cmd, true); 930 case SD_ZERO_WS10_UNMAP: 931 return sd_setup_write_same10_cmnd(cmd, true); 932 } 933 } 934 935 if (sdp->no_write_same) 936 return BLK_STS_TARGET; 937 938 if (sdkp->ws16 || lba > 0xffffffff || nr_blocks > 0xffff) 939 return sd_setup_write_same16_cmnd(cmd, false); 940 941 return sd_setup_write_same10_cmnd(cmd, false); 942 } 943 944 static void sd_config_write_same(struct scsi_disk *sdkp) 945 { 946 struct request_queue *q = sdkp->disk->queue; 947 unsigned int logical_block_size = sdkp->device->sector_size; 948 949 if (sdkp->device->no_write_same) { 950 sdkp->max_ws_blocks = 0; 951 goto out; 952 } 953 954 /* Some devices can not handle block counts above 0xffff despite 955 * supporting WRITE SAME(16). Consequently we default to 64k 956 * blocks per I/O unless the device explicitly advertises a 957 * bigger limit. 958 */ 959 if (sdkp->max_ws_blocks > SD_MAX_WS10_BLOCKS) 960 sdkp->max_ws_blocks = min_not_zero(sdkp->max_ws_blocks, 961 (u32)SD_MAX_WS16_BLOCKS); 962 else if (sdkp->ws16 || sdkp->ws10 || sdkp->device->no_report_opcodes) 963 sdkp->max_ws_blocks = min_not_zero(sdkp->max_ws_blocks, 964 (u32)SD_MAX_WS10_BLOCKS); 965 else { 966 sdkp->device->no_write_same = 1; 967 sdkp->max_ws_blocks = 0; 968 } 969 970 if (sdkp->lbprz && sdkp->lbpws) 971 sdkp->zeroing_mode = SD_ZERO_WS16_UNMAP; 972 else if (sdkp->lbprz && sdkp->lbpws10) 973 sdkp->zeroing_mode = SD_ZERO_WS10_UNMAP; 974 else if (sdkp->max_ws_blocks) 975 sdkp->zeroing_mode = SD_ZERO_WS; 976 else 977 sdkp->zeroing_mode = SD_ZERO_WRITE; 978 979 if (sdkp->max_ws_blocks && 980 sdkp->physical_block_size > logical_block_size) { 981 /* 982 * Reporting a maximum number of blocks that is not aligned 983 * on the device physical size would cause a large write same 984 * request to be split into physically unaligned chunks by 985 * __blkdev_issue_write_zeroes() and __blkdev_issue_write_same() 986 * even if the caller of these functions took care to align the 987 * large request. So make sure the maximum reported is aligned 988 * to the device physical block size. This is only an optional 989 * optimization for regular disks, but this is mandatory to 990 * avoid failure of large write same requests directed at 991 * sequential write required zones of host-managed ZBC disks. 992 */ 993 sdkp->max_ws_blocks = 994 round_down(sdkp->max_ws_blocks, 995 bytes_to_logical(sdkp->device, 996 sdkp->physical_block_size)); 997 } 998 999 out: 1000 blk_queue_max_write_same_sectors(q, sdkp->max_ws_blocks * 1001 (logical_block_size >> 9)); 1002 blk_queue_max_write_zeroes_sectors(q, sdkp->max_ws_blocks * 1003 (logical_block_size >> 9)); 1004 } 1005 1006 /** 1007 * sd_setup_write_same_cmnd - write the same data to multiple blocks 1008 * @cmd: command to prepare 1009 * 1010 * Will set up either WRITE SAME(10) or WRITE SAME(16) depending on 1011 * the preference indicated by the target device. 1012 **/ 1013 static blk_status_t sd_setup_write_same_cmnd(struct scsi_cmnd *cmd) 1014 { 1015 struct request *rq = cmd->request; 1016 struct scsi_device *sdp = cmd->device; 1017 struct scsi_disk *sdkp = scsi_disk(rq->rq_disk); 1018 struct bio *bio = rq->bio; 1019 u64 lba = sectors_to_logical(sdp, blk_rq_pos(rq)); 1020 u32 nr_blocks = sectors_to_logical(sdp, blk_rq_sectors(rq)); 1021 blk_status_t ret; 1022 1023 if (sdkp->device->no_write_same) 1024 return BLK_STS_TARGET; 1025 1026 BUG_ON(bio_offset(bio) || bio_iovec(bio).bv_len != sdp->sector_size); 1027 1028 rq->timeout = SD_WRITE_SAME_TIMEOUT; 1029 1030 if (sdkp->ws16 || lba > 0xffffffff || nr_blocks > 0xffff) { 1031 cmd->cmd_len = 16; 1032 cmd->cmnd[0] = WRITE_SAME_16; 1033 put_unaligned_be64(lba, &cmd->cmnd[2]); 1034 put_unaligned_be32(nr_blocks, &cmd->cmnd[10]); 1035 } else { 1036 cmd->cmd_len = 10; 1037 cmd->cmnd[0] = WRITE_SAME; 1038 put_unaligned_be32(lba, &cmd->cmnd[2]); 1039 put_unaligned_be16(nr_blocks, &cmd->cmnd[7]); 1040 } 1041 1042 cmd->transfersize = sdp->sector_size; 1043 cmd->allowed = SD_MAX_RETRIES; 1044 1045 /* 1046 * For WRITE SAME the data transferred via the DATA OUT buffer is 1047 * different from the amount of data actually written to the target. 1048 * 1049 * We set up __data_len to the amount of data transferred via the 1050 * DATA OUT buffer so that blk_rq_map_sg sets up the proper S/G list 1051 * to transfer a single sector of data first, but then reset it to 1052 * the amount of data to be written right after so that the I/O path 1053 * knows how much to actually write. 1054 */ 1055 rq->__data_len = sdp->sector_size; 1056 ret = scsi_init_io(cmd); 1057 rq->__data_len = blk_rq_bytes(rq); 1058 1059 return ret; 1060 } 1061 1062 static blk_status_t sd_setup_flush_cmnd(struct scsi_cmnd *cmd) 1063 { 1064 struct request *rq = cmd->request; 1065 1066 /* flush requests don't perform I/O, zero the S/G table */ 1067 memset(&cmd->sdb, 0, sizeof(cmd->sdb)); 1068 1069 cmd->cmnd[0] = SYNCHRONIZE_CACHE; 1070 cmd->cmd_len = 10; 1071 cmd->transfersize = 0; 1072 cmd->allowed = SD_MAX_RETRIES; 1073 1074 rq->timeout = rq->q->rq_timeout * SD_FLUSH_TIMEOUT_MULTIPLIER; 1075 return BLK_STS_OK; 1076 } 1077 1078 static blk_status_t sd_setup_rw32_cmnd(struct scsi_cmnd *cmd, bool write, 1079 sector_t lba, unsigned int nr_blocks, 1080 unsigned char flags) 1081 { 1082 cmd->cmnd = mempool_alloc(sd_cdb_pool, GFP_ATOMIC); 1083 if (unlikely(cmd->cmnd == NULL)) 1084 return BLK_STS_RESOURCE; 1085 1086 cmd->cmd_len = SD_EXT_CDB_SIZE; 1087 memset(cmd->cmnd, 0, cmd->cmd_len); 1088 1089 cmd->cmnd[0] = VARIABLE_LENGTH_CMD; 1090 cmd->cmnd[7] = 0x18; /* Additional CDB len */ 1091 cmd->cmnd[9] = write ? WRITE_32 : READ_32; 1092 cmd->cmnd[10] = flags; 1093 put_unaligned_be64(lba, &cmd->cmnd[12]); 1094 put_unaligned_be32(lba, &cmd->cmnd[20]); /* Expected Indirect LBA */ 1095 put_unaligned_be32(nr_blocks, &cmd->cmnd[28]); 1096 1097 return BLK_STS_OK; 1098 } 1099 1100 static blk_status_t sd_setup_rw16_cmnd(struct scsi_cmnd *cmd, bool write, 1101 sector_t lba, unsigned int nr_blocks, 1102 unsigned char flags) 1103 { 1104 cmd->cmd_len = 16; 1105 cmd->cmnd[0] = write ? WRITE_16 : READ_16; 1106 cmd->cmnd[1] = flags; 1107 cmd->cmnd[14] = 0; 1108 cmd->cmnd[15] = 0; 1109 put_unaligned_be64(lba, &cmd->cmnd[2]); 1110 put_unaligned_be32(nr_blocks, &cmd->cmnd[10]); 1111 1112 return BLK_STS_OK; 1113 } 1114 1115 static blk_status_t sd_setup_rw10_cmnd(struct scsi_cmnd *cmd, bool write, 1116 sector_t lba, unsigned int nr_blocks, 1117 unsigned char flags) 1118 { 1119 cmd->cmd_len = 10; 1120 cmd->cmnd[0] = write ? WRITE_10 : READ_10; 1121 cmd->cmnd[1] = flags; 1122 cmd->cmnd[6] = 0; 1123 cmd->cmnd[9] = 0; 1124 put_unaligned_be32(lba, &cmd->cmnd[2]); 1125 put_unaligned_be16(nr_blocks, &cmd->cmnd[7]); 1126 1127 return BLK_STS_OK; 1128 } 1129 1130 static blk_status_t sd_setup_rw6_cmnd(struct scsi_cmnd *cmd, bool write, 1131 sector_t lba, unsigned int nr_blocks, 1132 unsigned char flags) 1133 { 1134 /* Avoid that 0 blocks gets translated into 256 blocks. */ 1135 if (WARN_ON_ONCE(nr_blocks == 0)) 1136 return BLK_STS_IOERR; 1137 1138 if (unlikely(flags & 0x8)) { 1139 /* 1140 * This happens only if this drive failed 10byte rw 1141 * command with ILLEGAL_REQUEST during operation and 1142 * thus turned off use_10_for_rw. 1143 */ 1144 scmd_printk(KERN_ERR, cmd, "FUA write on READ/WRITE(6) drive\n"); 1145 return BLK_STS_IOERR; 1146 } 1147 1148 cmd->cmd_len = 6; 1149 cmd->cmnd[0] = write ? WRITE_6 : READ_6; 1150 cmd->cmnd[1] = (lba >> 16) & 0x1f; 1151 cmd->cmnd[2] = (lba >> 8) & 0xff; 1152 cmd->cmnd[3] = lba & 0xff; 1153 cmd->cmnd[4] = nr_blocks; 1154 cmd->cmnd[5] = 0; 1155 1156 return BLK_STS_OK; 1157 } 1158 1159 static blk_status_t sd_setup_read_write_cmnd(struct scsi_cmnd *cmd) 1160 { 1161 struct request *rq = cmd->request; 1162 struct scsi_device *sdp = cmd->device; 1163 struct scsi_disk *sdkp = scsi_disk(rq->rq_disk); 1164 sector_t lba = sectors_to_logical(sdp, blk_rq_pos(rq)); 1165 sector_t threshold; 1166 unsigned int nr_blocks = sectors_to_logical(sdp, blk_rq_sectors(rq)); 1167 bool dif, dix; 1168 unsigned int mask = logical_to_sectors(sdp, 1) - 1; 1169 bool write = rq_data_dir(rq) == WRITE; 1170 unsigned char protect, fua; 1171 blk_status_t ret; 1172 1173 ret = scsi_init_io(cmd); 1174 if (ret != BLK_STS_OK) 1175 return ret; 1176 1177 if (!scsi_device_online(sdp) || sdp->changed) { 1178 scmd_printk(KERN_ERR, cmd, "device offline or changed\n"); 1179 return BLK_STS_IOERR; 1180 } 1181 1182 if (blk_rq_pos(rq) + blk_rq_sectors(rq) > get_capacity(rq->rq_disk)) { 1183 scmd_printk(KERN_ERR, cmd, "access beyond end of device\n"); 1184 return BLK_STS_IOERR; 1185 } 1186 1187 if ((blk_rq_pos(rq) & mask) || (blk_rq_sectors(rq) & mask)) { 1188 scmd_printk(KERN_ERR, cmd, "request not aligned to the logical block size\n"); 1189 return BLK_STS_IOERR; 1190 } 1191 1192 /* 1193 * Some SD card readers can't handle accesses which touch the 1194 * last one or two logical blocks. Split accesses as needed. 1195 */ 1196 threshold = sdkp->capacity - SD_LAST_BUGGY_SECTORS; 1197 1198 if (unlikely(sdp->last_sector_bug && lba + nr_blocks > threshold)) { 1199 if (lba < threshold) { 1200 /* Access up to the threshold but not beyond */ 1201 nr_blocks = threshold - lba; 1202 } else { 1203 /* Access only a single logical block */ 1204 nr_blocks = 1; 1205 } 1206 } 1207 1208 fua = rq->cmd_flags & REQ_FUA ? 0x8 : 0; 1209 dix = scsi_prot_sg_count(cmd); 1210 dif = scsi_host_dif_capable(cmd->device->host, sdkp->protection_type); 1211 1212 if (write && dix) 1213 t10_pi_prepare(cmd->request, sdkp->protection_type); 1214 1215 if (dif || dix) 1216 protect = sd_setup_protect_cmnd(cmd, dix, dif); 1217 else 1218 protect = 0; 1219 1220 if (protect && sdkp->protection_type == T10_PI_TYPE2_PROTECTION) { 1221 ret = sd_setup_rw32_cmnd(cmd, write, lba, nr_blocks, 1222 protect | fua); 1223 } else if (sdp->use_16_for_rw || (nr_blocks > 0xffff)) { 1224 ret = sd_setup_rw16_cmnd(cmd, write, lba, nr_blocks, 1225 protect | fua); 1226 } else if ((nr_blocks > 0xff) || (lba > 0x1fffff) || 1227 sdp->use_10_for_rw || protect) { 1228 ret = sd_setup_rw10_cmnd(cmd, write, lba, nr_blocks, 1229 protect | fua); 1230 } else { 1231 ret = sd_setup_rw6_cmnd(cmd, write, lba, nr_blocks, 1232 protect | fua); 1233 } 1234 1235 if (unlikely(ret != BLK_STS_OK)) 1236 return ret; 1237 1238 /* 1239 * We shouldn't disconnect in the middle of a sector, so with a dumb 1240 * host adapter, it's safe to assume that we can at least transfer 1241 * this many bytes between each connect / disconnect. 1242 */ 1243 cmd->transfersize = sdp->sector_size; 1244 cmd->underflow = nr_blocks << 9; 1245 cmd->allowed = SD_MAX_RETRIES; 1246 cmd->sdb.length = nr_blocks * sdp->sector_size; 1247 1248 SCSI_LOG_HLQUEUE(1, 1249 scmd_printk(KERN_INFO, cmd, 1250 "%s: block=%llu, count=%d\n", __func__, 1251 (unsigned long long)blk_rq_pos(rq), 1252 blk_rq_sectors(rq))); 1253 SCSI_LOG_HLQUEUE(2, 1254 scmd_printk(KERN_INFO, cmd, 1255 "%s %d/%u 512 byte blocks.\n", 1256 write ? "writing" : "reading", nr_blocks, 1257 blk_rq_sectors(rq))); 1258 1259 /* 1260 * This indicates that the command is ready from our end to be 1261 * queued. 1262 */ 1263 return BLK_STS_OK; 1264 } 1265 1266 static blk_status_t sd_init_command(struct scsi_cmnd *cmd) 1267 { 1268 struct request *rq = cmd->request; 1269 1270 switch (req_op(rq)) { 1271 case REQ_OP_DISCARD: 1272 switch (scsi_disk(rq->rq_disk)->provisioning_mode) { 1273 case SD_LBP_UNMAP: 1274 return sd_setup_unmap_cmnd(cmd); 1275 case SD_LBP_WS16: 1276 return sd_setup_write_same16_cmnd(cmd, true); 1277 case SD_LBP_WS10: 1278 return sd_setup_write_same10_cmnd(cmd, true); 1279 case SD_LBP_ZERO: 1280 return sd_setup_write_same10_cmnd(cmd, false); 1281 default: 1282 return BLK_STS_TARGET; 1283 } 1284 case REQ_OP_WRITE_ZEROES: 1285 return sd_setup_write_zeroes_cmnd(cmd); 1286 case REQ_OP_WRITE_SAME: 1287 return sd_setup_write_same_cmnd(cmd); 1288 case REQ_OP_FLUSH: 1289 return sd_setup_flush_cmnd(cmd); 1290 case REQ_OP_READ: 1291 case REQ_OP_WRITE: 1292 return sd_setup_read_write_cmnd(cmd); 1293 case REQ_OP_ZONE_RESET: 1294 return sd_zbc_setup_reset_cmnd(cmd); 1295 default: 1296 WARN_ON_ONCE(1); 1297 return BLK_STS_NOTSUPP; 1298 } 1299 } 1300 1301 static void sd_uninit_command(struct scsi_cmnd *SCpnt) 1302 { 1303 struct request *rq = SCpnt->request; 1304 u8 *cmnd; 1305 1306 if (rq->rq_flags & RQF_SPECIAL_PAYLOAD) 1307 mempool_free(rq->special_vec.bv_page, sd_page_pool); 1308 1309 if (SCpnt->cmnd != scsi_req(rq)->cmd) { 1310 cmnd = SCpnt->cmnd; 1311 SCpnt->cmnd = NULL; 1312 SCpnt->cmd_len = 0; 1313 mempool_free(cmnd, sd_cdb_pool); 1314 } 1315 } 1316 1317 /** 1318 * sd_open - open a scsi disk device 1319 * @bdev: Block device of the scsi disk to open 1320 * @mode: FMODE_* mask 1321 * 1322 * Returns 0 if successful. Returns a negated errno value in case 1323 * of error. 1324 * 1325 * Note: This can be called from a user context (e.g. fsck(1) ) 1326 * or from within the kernel (e.g. as a result of a mount(1) ). 1327 * In the latter case @inode and @filp carry an abridged amount 1328 * of information as noted above. 1329 * 1330 * Locking: called with bdev->bd_mutex held. 1331 **/ 1332 static int sd_open(struct block_device *bdev, fmode_t mode) 1333 { 1334 struct scsi_disk *sdkp = scsi_disk_get(bdev->bd_disk); 1335 struct scsi_device *sdev; 1336 int retval; 1337 1338 if (!sdkp) 1339 return -ENXIO; 1340 1341 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_open\n")); 1342 1343 sdev = sdkp->device; 1344 1345 /* 1346 * If the device is in error recovery, wait until it is done. 1347 * If the device is offline, then disallow any access to it. 1348 */ 1349 retval = -ENXIO; 1350 if (!scsi_block_when_processing_errors(sdev)) 1351 goto error_out; 1352 1353 if (sdev->removable || sdkp->write_prot) 1354 check_disk_change(bdev); 1355 1356 /* 1357 * If the drive is empty, just let the open fail. 1358 */ 1359 retval = -ENOMEDIUM; 1360 if (sdev->removable && !sdkp->media_present && !(mode & FMODE_NDELAY)) 1361 goto error_out; 1362 1363 /* 1364 * If the device has the write protect tab set, have the open fail 1365 * if the user expects to be able to write to the thing. 1366 */ 1367 retval = -EROFS; 1368 if (sdkp->write_prot && (mode & FMODE_WRITE)) 1369 goto error_out; 1370 1371 /* 1372 * It is possible that the disk changing stuff resulted in 1373 * the device being taken offline. If this is the case, 1374 * report this to the user, and don't pretend that the 1375 * open actually succeeded. 1376 */ 1377 retval = -ENXIO; 1378 if (!scsi_device_online(sdev)) 1379 goto error_out; 1380 1381 if ((atomic_inc_return(&sdkp->openers) == 1) && sdev->removable) { 1382 if (scsi_block_when_processing_errors(sdev)) 1383 scsi_set_medium_removal(sdev, SCSI_REMOVAL_PREVENT); 1384 } 1385 1386 return 0; 1387 1388 error_out: 1389 scsi_disk_put(sdkp); 1390 return retval; 1391 } 1392 1393 /** 1394 * sd_release - invoked when the (last) close(2) is called on this 1395 * scsi disk. 1396 * @disk: disk to release 1397 * @mode: FMODE_* mask 1398 * 1399 * Returns 0. 1400 * 1401 * Note: may block (uninterruptible) if error recovery is underway 1402 * on this disk. 1403 * 1404 * Locking: called with bdev->bd_mutex held. 1405 **/ 1406 static void sd_release(struct gendisk *disk, fmode_t mode) 1407 { 1408 struct scsi_disk *sdkp = scsi_disk(disk); 1409 struct scsi_device *sdev = sdkp->device; 1410 1411 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_release\n")); 1412 1413 if (atomic_dec_return(&sdkp->openers) == 0 && sdev->removable) { 1414 if (scsi_block_when_processing_errors(sdev)) 1415 scsi_set_medium_removal(sdev, SCSI_REMOVAL_ALLOW); 1416 } 1417 1418 /* 1419 * XXX and what if there are packets in flight and this close() 1420 * XXX is followed by a "rmmod sd_mod"? 1421 */ 1422 1423 scsi_disk_put(sdkp); 1424 } 1425 1426 static int sd_getgeo(struct block_device *bdev, struct hd_geometry *geo) 1427 { 1428 struct scsi_disk *sdkp = scsi_disk(bdev->bd_disk); 1429 struct scsi_device *sdp = sdkp->device; 1430 struct Scsi_Host *host = sdp->host; 1431 sector_t capacity = logical_to_sectors(sdp, sdkp->capacity); 1432 int diskinfo[4]; 1433 1434 /* default to most commonly used values */ 1435 diskinfo[0] = 0x40; /* 1 << 6 */ 1436 diskinfo[1] = 0x20; /* 1 << 5 */ 1437 diskinfo[2] = capacity >> 11; 1438 1439 /* override with calculated, extended default, or driver values */ 1440 if (host->hostt->bios_param) 1441 host->hostt->bios_param(sdp, bdev, capacity, diskinfo); 1442 else 1443 scsicam_bios_param(bdev, capacity, diskinfo); 1444 1445 geo->heads = diskinfo[0]; 1446 geo->sectors = diskinfo[1]; 1447 geo->cylinders = diskinfo[2]; 1448 return 0; 1449 } 1450 1451 /** 1452 * sd_ioctl - process an ioctl 1453 * @bdev: target block device 1454 * @mode: FMODE_* mask 1455 * @cmd: ioctl command number 1456 * @arg: this is third argument given to ioctl(2) system call. 1457 * Often contains a pointer. 1458 * 1459 * Returns 0 if successful (some ioctls return positive numbers on 1460 * success as well). Returns a negated errno value in case of error. 1461 * 1462 * Note: most ioctls are forward onto the block subsystem or further 1463 * down in the scsi subsystem. 1464 **/ 1465 static int sd_ioctl(struct block_device *bdev, fmode_t mode, 1466 unsigned int cmd, unsigned long arg) 1467 { 1468 struct gendisk *disk = bdev->bd_disk; 1469 struct scsi_disk *sdkp = scsi_disk(disk); 1470 struct scsi_device *sdp = sdkp->device; 1471 void __user *p = (void __user *)arg; 1472 int error; 1473 1474 SCSI_LOG_IOCTL(1, sd_printk(KERN_INFO, sdkp, "sd_ioctl: disk=%s, " 1475 "cmd=0x%x\n", disk->disk_name, cmd)); 1476 1477 error = scsi_verify_blk_ioctl(bdev, cmd); 1478 if (error < 0) 1479 return error; 1480 1481 /* 1482 * If we are in the middle of error recovery, don't let anyone 1483 * else try and use this device. Also, if error recovery fails, it 1484 * may try and take the device offline, in which case all further 1485 * access to the device is prohibited. 1486 */ 1487 error = scsi_ioctl_block_when_processing_errors(sdp, cmd, 1488 (mode & FMODE_NDELAY) != 0); 1489 if (error) 1490 goto out; 1491 1492 if (is_sed_ioctl(cmd)) 1493 return sed_ioctl(sdkp->opal_dev, cmd, p); 1494 1495 /* 1496 * Send SCSI addressing ioctls directly to mid level, send other 1497 * ioctls to block level and then onto mid level if they can't be 1498 * resolved. 1499 */ 1500 switch (cmd) { 1501 case SCSI_IOCTL_GET_IDLUN: 1502 case SCSI_IOCTL_GET_BUS_NUMBER: 1503 error = scsi_ioctl(sdp, cmd, p); 1504 break; 1505 default: 1506 error = scsi_cmd_blk_ioctl(bdev, mode, cmd, p); 1507 if (error != -ENOTTY) 1508 break; 1509 error = scsi_ioctl(sdp, cmd, p); 1510 break; 1511 } 1512 out: 1513 return error; 1514 } 1515 1516 static void set_media_not_present(struct scsi_disk *sdkp) 1517 { 1518 if (sdkp->media_present) 1519 sdkp->device->changed = 1; 1520 1521 if (sdkp->device->removable) { 1522 sdkp->media_present = 0; 1523 sdkp->capacity = 0; 1524 } 1525 } 1526 1527 static int media_not_present(struct scsi_disk *sdkp, 1528 struct scsi_sense_hdr *sshdr) 1529 { 1530 if (!scsi_sense_valid(sshdr)) 1531 return 0; 1532 1533 /* not invoked for commands that could return deferred errors */ 1534 switch (sshdr->sense_key) { 1535 case UNIT_ATTENTION: 1536 case NOT_READY: 1537 /* medium not present */ 1538 if (sshdr->asc == 0x3A) { 1539 set_media_not_present(sdkp); 1540 return 1; 1541 } 1542 } 1543 return 0; 1544 } 1545 1546 /** 1547 * sd_check_events - check media events 1548 * @disk: kernel device descriptor 1549 * @clearing: disk events currently being cleared 1550 * 1551 * Returns mask of DISK_EVENT_*. 1552 * 1553 * Note: this function is invoked from the block subsystem. 1554 **/ 1555 static unsigned int sd_check_events(struct gendisk *disk, unsigned int clearing) 1556 { 1557 struct scsi_disk *sdkp = scsi_disk_get(disk); 1558 struct scsi_device *sdp; 1559 int retval; 1560 1561 if (!sdkp) 1562 return 0; 1563 1564 sdp = sdkp->device; 1565 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_check_events\n")); 1566 1567 /* 1568 * If the device is offline, don't send any commands - just pretend as 1569 * if the command failed. If the device ever comes back online, we 1570 * can deal with it then. It is only because of unrecoverable errors 1571 * that we would ever take a device offline in the first place. 1572 */ 1573 if (!scsi_device_online(sdp)) { 1574 set_media_not_present(sdkp); 1575 goto out; 1576 } 1577 1578 /* 1579 * Using TEST_UNIT_READY enables differentiation between drive with 1580 * no cartridge loaded - NOT READY, drive with changed cartridge - 1581 * UNIT ATTENTION, or with same cartridge - GOOD STATUS. 1582 * 1583 * Drives that auto spin down. eg iomega jaz 1G, will be started 1584 * by sd_spinup_disk() from sd_revalidate_disk(), which happens whenever 1585 * sd_revalidate() is called. 1586 */ 1587 if (scsi_block_when_processing_errors(sdp)) { 1588 struct scsi_sense_hdr sshdr = { 0, }; 1589 1590 retval = scsi_test_unit_ready(sdp, SD_TIMEOUT, SD_MAX_RETRIES, 1591 &sshdr); 1592 1593 /* failed to execute TUR, assume media not present */ 1594 if (host_byte(retval)) { 1595 set_media_not_present(sdkp); 1596 goto out; 1597 } 1598 1599 if (media_not_present(sdkp, &sshdr)) 1600 goto out; 1601 } 1602 1603 /* 1604 * For removable scsi disk we have to recognise the presence 1605 * of a disk in the drive. 1606 */ 1607 if (!sdkp->media_present) 1608 sdp->changed = 1; 1609 sdkp->media_present = 1; 1610 out: 1611 /* 1612 * sdp->changed is set under the following conditions: 1613 * 1614 * Medium present state has changed in either direction. 1615 * Device has indicated UNIT_ATTENTION. 1616 */ 1617 retval = sdp->changed ? DISK_EVENT_MEDIA_CHANGE : 0; 1618 sdp->changed = 0; 1619 scsi_disk_put(sdkp); 1620 return retval; 1621 } 1622 1623 static int sd_sync_cache(struct scsi_disk *sdkp, struct scsi_sense_hdr *sshdr) 1624 { 1625 int retries, res; 1626 struct scsi_device *sdp = sdkp->device; 1627 const int timeout = sdp->request_queue->rq_timeout 1628 * SD_FLUSH_TIMEOUT_MULTIPLIER; 1629 struct scsi_sense_hdr my_sshdr; 1630 1631 if (!scsi_device_online(sdp)) 1632 return -ENODEV; 1633 1634 /* caller might not be interested in sense, but we need it */ 1635 if (!sshdr) 1636 sshdr = &my_sshdr; 1637 1638 for (retries = 3; retries > 0; --retries) { 1639 unsigned char cmd[10] = { 0 }; 1640 1641 cmd[0] = SYNCHRONIZE_CACHE; 1642 /* 1643 * Leave the rest of the command zero to indicate 1644 * flush everything. 1645 */ 1646 res = scsi_execute(sdp, cmd, DMA_NONE, NULL, 0, NULL, sshdr, 1647 timeout, SD_MAX_RETRIES, 0, RQF_PM, NULL); 1648 if (res == 0) 1649 break; 1650 } 1651 1652 if (res) { 1653 sd_print_result(sdkp, "Synchronize Cache(10) failed", res); 1654 1655 if (driver_byte(res) == DRIVER_SENSE) 1656 sd_print_sense_hdr(sdkp, sshdr); 1657 1658 /* we need to evaluate the error return */ 1659 if (scsi_sense_valid(sshdr) && 1660 (sshdr->asc == 0x3a || /* medium not present */ 1661 sshdr->asc == 0x20)) /* invalid command */ 1662 /* this is no error here */ 1663 return 0; 1664 1665 switch (host_byte(res)) { 1666 /* ignore errors due to racing a disconnection */ 1667 case DID_BAD_TARGET: 1668 case DID_NO_CONNECT: 1669 return 0; 1670 /* signal the upper layer it might try again */ 1671 case DID_BUS_BUSY: 1672 case DID_IMM_RETRY: 1673 case DID_REQUEUE: 1674 case DID_SOFT_ERROR: 1675 return -EBUSY; 1676 default: 1677 return -EIO; 1678 } 1679 } 1680 return 0; 1681 } 1682 1683 static void sd_rescan(struct device *dev) 1684 { 1685 struct scsi_disk *sdkp = dev_get_drvdata(dev); 1686 1687 revalidate_disk(sdkp->disk); 1688 } 1689 1690 1691 #ifdef CONFIG_COMPAT 1692 /* 1693 * This gets directly called from VFS. When the ioctl 1694 * is not recognized we go back to the other translation paths. 1695 */ 1696 static int sd_compat_ioctl(struct block_device *bdev, fmode_t mode, 1697 unsigned int cmd, unsigned long arg) 1698 { 1699 struct scsi_device *sdev = scsi_disk(bdev->bd_disk)->device; 1700 int error; 1701 1702 error = scsi_ioctl_block_when_processing_errors(sdev, cmd, 1703 (mode & FMODE_NDELAY) != 0); 1704 if (error) 1705 return error; 1706 1707 /* 1708 * Let the static ioctl translation table take care of it. 1709 */ 1710 if (!sdev->host->hostt->compat_ioctl) 1711 return -ENOIOCTLCMD; 1712 return sdev->host->hostt->compat_ioctl(sdev, cmd, (void __user *)arg); 1713 } 1714 #endif 1715 1716 static char sd_pr_type(enum pr_type type) 1717 { 1718 switch (type) { 1719 case PR_WRITE_EXCLUSIVE: 1720 return 0x01; 1721 case PR_EXCLUSIVE_ACCESS: 1722 return 0x03; 1723 case PR_WRITE_EXCLUSIVE_REG_ONLY: 1724 return 0x05; 1725 case PR_EXCLUSIVE_ACCESS_REG_ONLY: 1726 return 0x06; 1727 case PR_WRITE_EXCLUSIVE_ALL_REGS: 1728 return 0x07; 1729 case PR_EXCLUSIVE_ACCESS_ALL_REGS: 1730 return 0x08; 1731 default: 1732 return 0; 1733 } 1734 }; 1735 1736 static int sd_pr_command(struct block_device *bdev, u8 sa, 1737 u64 key, u64 sa_key, u8 type, u8 flags) 1738 { 1739 struct scsi_device *sdev = scsi_disk(bdev->bd_disk)->device; 1740 struct scsi_sense_hdr sshdr; 1741 int result; 1742 u8 cmd[16] = { 0, }; 1743 u8 data[24] = { 0, }; 1744 1745 cmd[0] = PERSISTENT_RESERVE_OUT; 1746 cmd[1] = sa; 1747 cmd[2] = type; 1748 put_unaligned_be32(sizeof(data), &cmd[5]); 1749 1750 put_unaligned_be64(key, &data[0]); 1751 put_unaligned_be64(sa_key, &data[8]); 1752 data[20] = flags; 1753 1754 result = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, &data, sizeof(data), 1755 &sshdr, SD_TIMEOUT, SD_MAX_RETRIES, NULL); 1756 1757 if (driver_byte(result) == DRIVER_SENSE && 1758 scsi_sense_valid(&sshdr)) { 1759 sdev_printk(KERN_INFO, sdev, "PR command failed: %d\n", result); 1760 scsi_print_sense_hdr(sdev, NULL, &sshdr); 1761 } 1762 1763 return result; 1764 } 1765 1766 static int sd_pr_register(struct block_device *bdev, u64 old_key, u64 new_key, 1767 u32 flags) 1768 { 1769 if (flags & ~PR_FL_IGNORE_KEY) 1770 return -EOPNOTSUPP; 1771 return sd_pr_command(bdev, (flags & PR_FL_IGNORE_KEY) ? 0x06 : 0x00, 1772 old_key, new_key, 0, 1773 (1 << 0) /* APTPL */); 1774 } 1775 1776 static int sd_pr_reserve(struct block_device *bdev, u64 key, enum pr_type type, 1777 u32 flags) 1778 { 1779 if (flags) 1780 return -EOPNOTSUPP; 1781 return sd_pr_command(bdev, 0x01, key, 0, sd_pr_type(type), 0); 1782 } 1783 1784 static int sd_pr_release(struct block_device *bdev, u64 key, enum pr_type type) 1785 { 1786 return sd_pr_command(bdev, 0x02, key, 0, sd_pr_type(type), 0); 1787 } 1788 1789 static int sd_pr_preempt(struct block_device *bdev, u64 old_key, u64 new_key, 1790 enum pr_type type, bool abort) 1791 { 1792 return sd_pr_command(bdev, abort ? 0x05 : 0x04, old_key, new_key, 1793 sd_pr_type(type), 0); 1794 } 1795 1796 static int sd_pr_clear(struct block_device *bdev, u64 key) 1797 { 1798 return sd_pr_command(bdev, 0x03, key, 0, 0, 0); 1799 } 1800 1801 static const struct pr_ops sd_pr_ops = { 1802 .pr_register = sd_pr_register, 1803 .pr_reserve = sd_pr_reserve, 1804 .pr_release = sd_pr_release, 1805 .pr_preempt = sd_pr_preempt, 1806 .pr_clear = sd_pr_clear, 1807 }; 1808 1809 static const struct block_device_operations sd_fops = { 1810 .owner = THIS_MODULE, 1811 .open = sd_open, 1812 .release = sd_release, 1813 .ioctl = sd_ioctl, 1814 .getgeo = sd_getgeo, 1815 #ifdef CONFIG_COMPAT 1816 .compat_ioctl = sd_compat_ioctl, 1817 #endif 1818 .check_events = sd_check_events, 1819 .revalidate_disk = sd_revalidate_disk, 1820 .unlock_native_capacity = sd_unlock_native_capacity, 1821 .report_zones = sd_zbc_report_zones, 1822 .pr_ops = &sd_pr_ops, 1823 }; 1824 1825 /** 1826 * sd_eh_reset - reset error handling callback 1827 * @scmd: sd-issued command that has failed 1828 * 1829 * This function is called by the SCSI midlayer before starting 1830 * SCSI EH. When counting medium access failures we have to be 1831 * careful to register it only only once per device and SCSI EH run; 1832 * there might be several timed out commands which will cause the 1833 * 'max_medium_access_timeouts' counter to trigger after the first 1834 * SCSI EH run already and set the device to offline. 1835 * So this function resets the internal counter before starting SCSI EH. 1836 **/ 1837 static void sd_eh_reset(struct scsi_cmnd *scmd) 1838 { 1839 struct scsi_disk *sdkp = scsi_disk(scmd->request->rq_disk); 1840 1841 /* New SCSI EH run, reset gate variable */ 1842 sdkp->ignore_medium_access_errors = false; 1843 } 1844 1845 /** 1846 * sd_eh_action - error handling callback 1847 * @scmd: sd-issued command that has failed 1848 * @eh_disp: The recovery disposition suggested by the midlayer 1849 * 1850 * This function is called by the SCSI midlayer upon completion of an 1851 * error test command (currently TEST UNIT READY). The result of sending 1852 * the eh command is passed in eh_disp. We're looking for devices that 1853 * fail medium access commands but are OK with non access commands like 1854 * test unit ready (so wrongly see the device as having a successful 1855 * recovery) 1856 **/ 1857 static int sd_eh_action(struct scsi_cmnd *scmd, int eh_disp) 1858 { 1859 struct scsi_disk *sdkp = scsi_disk(scmd->request->rq_disk); 1860 struct scsi_device *sdev = scmd->device; 1861 1862 if (!scsi_device_online(sdev) || 1863 !scsi_medium_access_command(scmd) || 1864 host_byte(scmd->result) != DID_TIME_OUT || 1865 eh_disp != SUCCESS) 1866 return eh_disp; 1867 1868 /* 1869 * The device has timed out executing a medium access command. 1870 * However, the TEST UNIT READY command sent during error 1871 * handling completed successfully. Either the device is in the 1872 * process of recovering or has it suffered an internal failure 1873 * that prevents access to the storage medium. 1874 */ 1875 if (!sdkp->ignore_medium_access_errors) { 1876 sdkp->medium_access_timed_out++; 1877 sdkp->ignore_medium_access_errors = true; 1878 } 1879 1880 /* 1881 * If the device keeps failing read/write commands but TEST UNIT 1882 * READY always completes successfully we assume that medium 1883 * access is no longer possible and take the device offline. 1884 */ 1885 if (sdkp->medium_access_timed_out >= sdkp->max_medium_access_timeouts) { 1886 scmd_printk(KERN_ERR, scmd, 1887 "Medium access timeout failure. Offlining disk!\n"); 1888 mutex_lock(&sdev->state_mutex); 1889 scsi_device_set_state(sdev, SDEV_OFFLINE); 1890 mutex_unlock(&sdev->state_mutex); 1891 1892 return SUCCESS; 1893 } 1894 1895 return eh_disp; 1896 } 1897 1898 static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd) 1899 { 1900 struct request *req = scmd->request; 1901 struct scsi_device *sdev = scmd->device; 1902 unsigned int transferred, good_bytes; 1903 u64 start_lba, end_lba, bad_lba; 1904 1905 /* 1906 * Some commands have a payload smaller than the device logical 1907 * block size (e.g. INQUIRY on a 4K disk). 1908 */ 1909 if (scsi_bufflen(scmd) <= sdev->sector_size) 1910 return 0; 1911 1912 /* Check if we have a 'bad_lba' information */ 1913 if (!scsi_get_sense_info_fld(scmd->sense_buffer, 1914 SCSI_SENSE_BUFFERSIZE, 1915 &bad_lba)) 1916 return 0; 1917 1918 /* 1919 * If the bad lba was reported incorrectly, we have no idea where 1920 * the error is. 1921 */ 1922 start_lba = sectors_to_logical(sdev, blk_rq_pos(req)); 1923 end_lba = start_lba + bytes_to_logical(sdev, scsi_bufflen(scmd)); 1924 if (bad_lba < start_lba || bad_lba >= end_lba) 1925 return 0; 1926 1927 /* 1928 * resid is optional but mostly filled in. When it's unused, 1929 * its value is zero, so we assume the whole buffer transferred 1930 */ 1931 transferred = scsi_bufflen(scmd) - scsi_get_resid(scmd); 1932 1933 /* This computation should always be done in terms of the 1934 * resolution of the device's medium. 1935 */ 1936 good_bytes = logical_to_bytes(sdev, bad_lba - start_lba); 1937 1938 return min(good_bytes, transferred); 1939 } 1940 1941 /** 1942 * sd_done - bottom half handler: called when the lower level 1943 * driver has completed (successfully or otherwise) a scsi command. 1944 * @SCpnt: mid-level's per command structure. 1945 * 1946 * Note: potentially run from within an ISR. Must not block. 1947 **/ 1948 static int sd_done(struct scsi_cmnd *SCpnt) 1949 { 1950 int result = SCpnt->result; 1951 unsigned int good_bytes = result ? 0 : scsi_bufflen(SCpnt); 1952 unsigned int sector_size = SCpnt->device->sector_size; 1953 unsigned int resid; 1954 struct scsi_sense_hdr sshdr; 1955 struct scsi_disk *sdkp = scsi_disk(SCpnt->request->rq_disk); 1956 struct request *req = SCpnt->request; 1957 int sense_valid = 0; 1958 int sense_deferred = 0; 1959 1960 switch (req_op(req)) { 1961 case REQ_OP_DISCARD: 1962 case REQ_OP_WRITE_ZEROES: 1963 case REQ_OP_WRITE_SAME: 1964 case REQ_OP_ZONE_RESET: 1965 if (!result) { 1966 good_bytes = blk_rq_bytes(req); 1967 scsi_set_resid(SCpnt, 0); 1968 } else { 1969 good_bytes = 0; 1970 scsi_set_resid(SCpnt, blk_rq_bytes(req)); 1971 } 1972 break; 1973 default: 1974 /* 1975 * In case of bogus fw or device, we could end up having 1976 * an unaligned partial completion. Check this here and force 1977 * alignment. 1978 */ 1979 resid = scsi_get_resid(SCpnt); 1980 if (resid & (sector_size - 1)) { 1981 sd_printk(KERN_INFO, sdkp, 1982 "Unaligned partial completion (resid=%u, sector_sz=%u)\n", 1983 resid, sector_size); 1984 resid = min(scsi_bufflen(SCpnt), 1985 round_up(resid, sector_size)); 1986 scsi_set_resid(SCpnt, resid); 1987 } 1988 } 1989 1990 if (result) { 1991 sense_valid = scsi_command_normalize_sense(SCpnt, &sshdr); 1992 if (sense_valid) 1993 sense_deferred = scsi_sense_is_deferred(&sshdr); 1994 } 1995 sdkp->medium_access_timed_out = 0; 1996 1997 if (driver_byte(result) != DRIVER_SENSE && 1998 (!sense_valid || sense_deferred)) 1999 goto out; 2000 2001 switch (sshdr.sense_key) { 2002 case HARDWARE_ERROR: 2003 case MEDIUM_ERROR: 2004 good_bytes = sd_completed_bytes(SCpnt); 2005 break; 2006 case RECOVERED_ERROR: 2007 good_bytes = scsi_bufflen(SCpnt); 2008 break; 2009 case NO_SENSE: 2010 /* This indicates a false check condition, so ignore it. An 2011 * unknown amount of data was transferred so treat it as an 2012 * error. 2013 */ 2014 SCpnt->result = 0; 2015 memset(SCpnt->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE); 2016 break; 2017 case ABORTED_COMMAND: 2018 if (sshdr.asc == 0x10) /* DIF: Target detected corruption */ 2019 good_bytes = sd_completed_bytes(SCpnt); 2020 break; 2021 case ILLEGAL_REQUEST: 2022 switch (sshdr.asc) { 2023 case 0x10: /* DIX: Host detected corruption */ 2024 good_bytes = sd_completed_bytes(SCpnt); 2025 break; 2026 case 0x20: /* INVALID COMMAND OPCODE */ 2027 case 0x24: /* INVALID FIELD IN CDB */ 2028 switch (SCpnt->cmnd[0]) { 2029 case UNMAP: 2030 sd_config_discard(sdkp, SD_LBP_DISABLE); 2031 break; 2032 case WRITE_SAME_16: 2033 case WRITE_SAME: 2034 if (SCpnt->cmnd[1] & 8) { /* UNMAP */ 2035 sd_config_discard(sdkp, SD_LBP_DISABLE); 2036 } else { 2037 sdkp->device->no_write_same = 1; 2038 sd_config_write_same(sdkp); 2039 req->rq_flags |= RQF_QUIET; 2040 } 2041 break; 2042 } 2043 } 2044 break; 2045 default: 2046 break; 2047 } 2048 2049 out: 2050 if (sd_is_zoned(sdkp)) 2051 sd_zbc_complete(SCpnt, good_bytes, &sshdr); 2052 2053 SCSI_LOG_HLCOMPLETE(1, scmd_printk(KERN_INFO, SCpnt, 2054 "sd_done: completed %d of %d bytes\n", 2055 good_bytes, scsi_bufflen(SCpnt))); 2056 2057 if (rq_data_dir(SCpnt->request) == READ && scsi_prot_sg_count(SCpnt) && 2058 good_bytes) 2059 t10_pi_complete(SCpnt->request, sdkp->protection_type, 2060 good_bytes / scsi_prot_interval(SCpnt)); 2061 2062 return good_bytes; 2063 } 2064 2065 /* 2066 * spinup disk - called only in sd_revalidate_disk() 2067 */ 2068 static void 2069 sd_spinup_disk(struct scsi_disk *sdkp) 2070 { 2071 unsigned char cmd[10]; 2072 unsigned long spintime_expire = 0; 2073 int retries, spintime; 2074 unsigned int the_result; 2075 struct scsi_sense_hdr sshdr; 2076 int sense_valid = 0; 2077 2078 spintime = 0; 2079 2080 /* Spin up drives, as required. Only do this at boot time */ 2081 /* Spinup needs to be done for module loads too. */ 2082 do { 2083 retries = 0; 2084 2085 do { 2086 cmd[0] = TEST_UNIT_READY; 2087 memset((void *) &cmd[1], 0, 9); 2088 2089 the_result = scsi_execute_req(sdkp->device, cmd, 2090 DMA_NONE, NULL, 0, 2091 &sshdr, SD_TIMEOUT, 2092 SD_MAX_RETRIES, NULL); 2093 2094 /* 2095 * If the drive has indicated to us that it 2096 * doesn't have any media in it, don't bother 2097 * with any more polling. 2098 */ 2099 if (media_not_present(sdkp, &sshdr)) 2100 return; 2101 2102 if (the_result) 2103 sense_valid = scsi_sense_valid(&sshdr); 2104 retries++; 2105 } while (retries < 3 && 2106 (!scsi_status_is_good(the_result) || 2107 ((driver_byte(the_result) == DRIVER_SENSE) && 2108 sense_valid && sshdr.sense_key == UNIT_ATTENTION))); 2109 2110 if (driver_byte(the_result) != DRIVER_SENSE) { 2111 /* no sense, TUR either succeeded or failed 2112 * with a status error */ 2113 if(!spintime && !scsi_status_is_good(the_result)) { 2114 sd_print_result(sdkp, "Test Unit Ready failed", 2115 the_result); 2116 } 2117 break; 2118 } 2119 2120 /* 2121 * The device does not want the automatic start to be issued. 2122 */ 2123 if (sdkp->device->no_start_on_add) 2124 break; 2125 2126 if (sense_valid && sshdr.sense_key == NOT_READY) { 2127 if (sshdr.asc == 4 && sshdr.ascq == 3) 2128 break; /* manual intervention required */ 2129 if (sshdr.asc == 4 && sshdr.ascq == 0xb) 2130 break; /* standby */ 2131 if (sshdr.asc == 4 && sshdr.ascq == 0xc) 2132 break; /* unavailable */ 2133 if (sshdr.asc == 4 && sshdr.ascq == 0x1b) 2134 break; /* sanitize in progress */ 2135 /* 2136 * Issue command to spin up drive when not ready 2137 */ 2138 if (!spintime) { 2139 sd_printk(KERN_NOTICE, sdkp, "Spinning up disk..."); 2140 cmd[0] = START_STOP; 2141 cmd[1] = 1; /* Return immediately */ 2142 memset((void *) &cmd[2], 0, 8); 2143 cmd[4] = 1; /* Start spin cycle */ 2144 if (sdkp->device->start_stop_pwr_cond) 2145 cmd[4] |= 1 << 4; 2146 scsi_execute_req(sdkp->device, cmd, DMA_NONE, 2147 NULL, 0, &sshdr, 2148 SD_TIMEOUT, SD_MAX_RETRIES, 2149 NULL); 2150 spintime_expire = jiffies + 100 * HZ; 2151 spintime = 1; 2152 } 2153 /* Wait 1 second for next try */ 2154 msleep(1000); 2155 printk(KERN_CONT "."); 2156 2157 /* 2158 * Wait for USB flash devices with slow firmware. 2159 * Yes, this sense key/ASC combination shouldn't 2160 * occur here. It's characteristic of these devices. 2161 */ 2162 } else if (sense_valid && 2163 sshdr.sense_key == UNIT_ATTENTION && 2164 sshdr.asc == 0x28) { 2165 if (!spintime) { 2166 spintime_expire = jiffies + 5 * HZ; 2167 spintime = 1; 2168 } 2169 /* Wait 1 second for next try */ 2170 msleep(1000); 2171 } else { 2172 /* we don't understand the sense code, so it's 2173 * probably pointless to loop */ 2174 if(!spintime) { 2175 sd_printk(KERN_NOTICE, sdkp, "Unit Not Ready\n"); 2176 sd_print_sense_hdr(sdkp, &sshdr); 2177 } 2178 break; 2179 } 2180 2181 } while (spintime && time_before_eq(jiffies, spintime_expire)); 2182 2183 if (spintime) { 2184 if (scsi_status_is_good(the_result)) 2185 printk(KERN_CONT "ready\n"); 2186 else 2187 printk(KERN_CONT "not responding...\n"); 2188 } 2189 } 2190 2191 /* 2192 * Determine whether disk supports Data Integrity Field. 2193 */ 2194 static int sd_read_protection_type(struct scsi_disk *sdkp, unsigned char *buffer) 2195 { 2196 struct scsi_device *sdp = sdkp->device; 2197 u8 type; 2198 int ret = 0; 2199 2200 if (scsi_device_protection(sdp) == 0 || (buffer[12] & 1) == 0) 2201 return ret; 2202 2203 type = ((buffer[12] >> 1) & 7) + 1; /* P_TYPE 0 = Type 1 */ 2204 2205 if (type > T10_PI_TYPE3_PROTECTION) 2206 ret = -ENODEV; 2207 else if (scsi_host_dif_capable(sdp->host, type)) 2208 ret = 1; 2209 2210 if (sdkp->first_scan || type != sdkp->protection_type) 2211 switch (ret) { 2212 case -ENODEV: 2213 sd_printk(KERN_ERR, sdkp, "formatted with unsupported" \ 2214 " protection type %u. Disabling disk!\n", 2215 type); 2216 break; 2217 case 1: 2218 sd_printk(KERN_NOTICE, sdkp, 2219 "Enabling DIF Type %u protection\n", type); 2220 break; 2221 case 0: 2222 sd_printk(KERN_NOTICE, sdkp, 2223 "Disabling DIF Type %u protection\n", type); 2224 break; 2225 } 2226 2227 sdkp->protection_type = type; 2228 2229 return ret; 2230 } 2231 2232 static void read_capacity_error(struct scsi_disk *sdkp, struct scsi_device *sdp, 2233 struct scsi_sense_hdr *sshdr, int sense_valid, 2234 int the_result) 2235 { 2236 if (driver_byte(the_result) == DRIVER_SENSE) 2237 sd_print_sense_hdr(sdkp, sshdr); 2238 else 2239 sd_printk(KERN_NOTICE, sdkp, "Sense not available.\n"); 2240 2241 /* 2242 * Set dirty bit for removable devices if not ready - 2243 * sometimes drives will not report this properly. 2244 */ 2245 if (sdp->removable && 2246 sense_valid && sshdr->sense_key == NOT_READY) 2247 set_media_not_present(sdkp); 2248 2249 /* 2250 * We used to set media_present to 0 here to indicate no media 2251 * in the drive, but some drives fail read capacity even with 2252 * media present, so we can't do that. 2253 */ 2254 sdkp->capacity = 0; /* unknown mapped to zero - as usual */ 2255 } 2256 2257 #define RC16_LEN 32 2258 #if RC16_LEN > SD_BUF_SIZE 2259 #error RC16_LEN must not be more than SD_BUF_SIZE 2260 #endif 2261 2262 #define READ_CAPACITY_RETRIES_ON_RESET 10 2263 2264 /* 2265 * Ensure that we don't overflow sector_t when CONFIG_LBDAF is not set 2266 * and the reported logical block size is bigger than 512 bytes. Note 2267 * that last_sector is a u64 and therefore logical_to_sectors() is not 2268 * applicable. 2269 */ 2270 static bool sd_addressable_capacity(u64 lba, unsigned int sector_size) 2271 { 2272 u64 last_sector = (lba + 1ULL) << (ilog2(sector_size) - 9); 2273 2274 if (sizeof(sector_t) == 4 && last_sector > U32_MAX) 2275 return false; 2276 2277 return true; 2278 } 2279 2280 static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp, 2281 unsigned char *buffer) 2282 { 2283 unsigned char cmd[16]; 2284 struct scsi_sense_hdr sshdr; 2285 int sense_valid = 0; 2286 int the_result; 2287 int retries = 3, reset_retries = READ_CAPACITY_RETRIES_ON_RESET; 2288 unsigned int alignment; 2289 unsigned long long lba; 2290 unsigned sector_size; 2291 2292 if (sdp->no_read_capacity_16) 2293 return -EINVAL; 2294 2295 do { 2296 memset(cmd, 0, 16); 2297 cmd[0] = SERVICE_ACTION_IN_16; 2298 cmd[1] = SAI_READ_CAPACITY_16; 2299 cmd[13] = RC16_LEN; 2300 memset(buffer, 0, RC16_LEN); 2301 2302 the_result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE, 2303 buffer, RC16_LEN, &sshdr, 2304 SD_TIMEOUT, SD_MAX_RETRIES, NULL); 2305 2306 if (media_not_present(sdkp, &sshdr)) 2307 return -ENODEV; 2308 2309 if (the_result) { 2310 sense_valid = scsi_sense_valid(&sshdr); 2311 if (sense_valid && 2312 sshdr.sense_key == ILLEGAL_REQUEST && 2313 (sshdr.asc == 0x20 || sshdr.asc == 0x24) && 2314 sshdr.ascq == 0x00) 2315 /* Invalid Command Operation Code or 2316 * Invalid Field in CDB, just retry 2317 * silently with RC10 */ 2318 return -EINVAL; 2319 if (sense_valid && 2320 sshdr.sense_key == UNIT_ATTENTION && 2321 sshdr.asc == 0x29 && sshdr.ascq == 0x00) 2322 /* Device reset might occur several times, 2323 * give it one more chance */ 2324 if (--reset_retries > 0) 2325 continue; 2326 } 2327 retries--; 2328 2329 } while (the_result && retries); 2330 2331 if (the_result) { 2332 sd_print_result(sdkp, "Read Capacity(16) failed", the_result); 2333 read_capacity_error(sdkp, sdp, &sshdr, sense_valid, the_result); 2334 return -EINVAL; 2335 } 2336 2337 sector_size = get_unaligned_be32(&buffer[8]); 2338 lba = get_unaligned_be64(&buffer[0]); 2339 2340 if (sd_read_protection_type(sdkp, buffer) < 0) { 2341 sdkp->capacity = 0; 2342 return -ENODEV; 2343 } 2344 2345 if (!sd_addressable_capacity(lba, sector_size)) { 2346 sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a " 2347 "kernel compiled with support for large block " 2348 "devices.\n"); 2349 sdkp->capacity = 0; 2350 return -EOVERFLOW; 2351 } 2352 2353 /* Logical blocks per physical block exponent */ 2354 sdkp->physical_block_size = (1 << (buffer[13] & 0xf)) * sector_size; 2355 2356 /* RC basis */ 2357 sdkp->rc_basis = (buffer[12] >> 4) & 0x3; 2358 2359 /* Lowest aligned logical block */ 2360 alignment = ((buffer[14] & 0x3f) << 8 | buffer[15]) * sector_size; 2361 blk_queue_alignment_offset(sdp->request_queue, alignment); 2362 if (alignment && sdkp->first_scan) 2363 sd_printk(KERN_NOTICE, sdkp, 2364 "physical block alignment offset: %u\n", alignment); 2365 2366 if (buffer[14] & 0x80) { /* LBPME */ 2367 sdkp->lbpme = 1; 2368 2369 if (buffer[14] & 0x40) /* LBPRZ */ 2370 sdkp->lbprz = 1; 2371 2372 sd_config_discard(sdkp, SD_LBP_WS16); 2373 } 2374 2375 sdkp->capacity = lba + 1; 2376 return sector_size; 2377 } 2378 2379 static int read_capacity_10(struct scsi_disk *sdkp, struct scsi_device *sdp, 2380 unsigned char *buffer) 2381 { 2382 unsigned char cmd[16]; 2383 struct scsi_sense_hdr sshdr; 2384 int sense_valid = 0; 2385 int the_result; 2386 int retries = 3, reset_retries = READ_CAPACITY_RETRIES_ON_RESET; 2387 sector_t lba; 2388 unsigned sector_size; 2389 2390 do { 2391 cmd[0] = READ_CAPACITY; 2392 memset(&cmd[1], 0, 9); 2393 memset(buffer, 0, 8); 2394 2395 the_result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE, 2396 buffer, 8, &sshdr, 2397 SD_TIMEOUT, SD_MAX_RETRIES, NULL); 2398 2399 if (media_not_present(sdkp, &sshdr)) 2400 return -ENODEV; 2401 2402 if (the_result) { 2403 sense_valid = scsi_sense_valid(&sshdr); 2404 if (sense_valid && 2405 sshdr.sense_key == UNIT_ATTENTION && 2406 sshdr.asc == 0x29 && sshdr.ascq == 0x00) 2407 /* Device reset might occur several times, 2408 * give it one more chance */ 2409 if (--reset_retries > 0) 2410 continue; 2411 } 2412 retries--; 2413 2414 } while (the_result && retries); 2415 2416 if (the_result) { 2417 sd_print_result(sdkp, "Read Capacity(10) failed", the_result); 2418 read_capacity_error(sdkp, sdp, &sshdr, sense_valid, the_result); 2419 return -EINVAL; 2420 } 2421 2422 sector_size = get_unaligned_be32(&buffer[4]); 2423 lba = get_unaligned_be32(&buffer[0]); 2424 2425 if (sdp->no_read_capacity_16 && (lba == 0xffffffff)) { 2426 /* Some buggy (usb cardreader) devices return an lba of 2427 0xffffffff when the want to report a size of 0 (with 2428 which they really mean no media is present) */ 2429 sdkp->capacity = 0; 2430 sdkp->physical_block_size = sector_size; 2431 return sector_size; 2432 } 2433 2434 if (!sd_addressable_capacity(lba, sector_size)) { 2435 sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a " 2436 "kernel compiled with support for large block " 2437 "devices.\n"); 2438 sdkp->capacity = 0; 2439 return -EOVERFLOW; 2440 } 2441 2442 sdkp->capacity = lba + 1; 2443 sdkp->physical_block_size = sector_size; 2444 return sector_size; 2445 } 2446 2447 static int sd_try_rc16_first(struct scsi_device *sdp) 2448 { 2449 if (sdp->host->max_cmd_len < 16) 2450 return 0; 2451 if (sdp->try_rc_10_first) 2452 return 0; 2453 if (sdp->scsi_level > SCSI_SPC_2) 2454 return 1; 2455 if (scsi_device_protection(sdp)) 2456 return 1; 2457 return 0; 2458 } 2459 2460 /* 2461 * read disk capacity 2462 */ 2463 static void 2464 sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer) 2465 { 2466 int sector_size; 2467 struct scsi_device *sdp = sdkp->device; 2468 2469 if (sd_try_rc16_first(sdp)) { 2470 sector_size = read_capacity_16(sdkp, sdp, buffer); 2471 if (sector_size == -EOVERFLOW) 2472 goto got_data; 2473 if (sector_size == -ENODEV) 2474 return; 2475 if (sector_size < 0) 2476 sector_size = read_capacity_10(sdkp, sdp, buffer); 2477 if (sector_size < 0) 2478 return; 2479 } else { 2480 sector_size = read_capacity_10(sdkp, sdp, buffer); 2481 if (sector_size == -EOVERFLOW) 2482 goto got_data; 2483 if (sector_size < 0) 2484 return; 2485 if ((sizeof(sdkp->capacity) > 4) && 2486 (sdkp->capacity > 0xffffffffULL)) { 2487 int old_sector_size = sector_size; 2488 sd_printk(KERN_NOTICE, sdkp, "Very big device. " 2489 "Trying to use READ CAPACITY(16).\n"); 2490 sector_size = read_capacity_16(sdkp, sdp, buffer); 2491 if (sector_size < 0) { 2492 sd_printk(KERN_NOTICE, sdkp, 2493 "Using 0xffffffff as device size\n"); 2494 sdkp->capacity = 1 + (sector_t) 0xffffffff; 2495 sector_size = old_sector_size; 2496 goto got_data; 2497 } 2498 /* Remember that READ CAPACITY(16) succeeded */ 2499 sdp->try_rc_10_first = 0; 2500 } 2501 } 2502 2503 /* Some devices are known to return the total number of blocks, 2504 * not the highest block number. Some devices have versions 2505 * which do this and others which do not. Some devices we might 2506 * suspect of doing this but we don't know for certain. 2507 * 2508 * If we know the reported capacity is wrong, decrement it. If 2509 * we can only guess, then assume the number of blocks is even 2510 * (usually true but not always) and err on the side of lowering 2511 * the capacity. 2512 */ 2513 if (sdp->fix_capacity || 2514 (sdp->guess_capacity && (sdkp->capacity & 0x01))) { 2515 sd_printk(KERN_INFO, sdkp, "Adjusting the sector count " 2516 "from its reported value: %llu\n", 2517 (unsigned long long) sdkp->capacity); 2518 --sdkp->capacity; 2519 } 2520 2521 got_data: 2522 if (sector_size == 0) { 2523 sector_size = 512; 2524 sd_printk(KERN_NOTICE, sdkp, "Sector size 0 reported, " 2525 "assuming 512.\n"); 2526 } 2527 2528 if (sector_size != 512 && 2529 sector_size != 1024 && 2530 sector_size != 2048 && 2531 sector_size != 4096) { 2532 sd_printk(KERN_NOTICE, sdkp, "Unsupported sector size %d.\n", 2533 sector_size); 2534 /* 2535 * The user might want to re-format the drive with 2536 * a supported sectorsize. Once this happens, it 2537 * would be relatively trivial to set the thing up. 2538 * For this reason, we leave the thing in the table. 2539 */ 2540 sdkp->capacity = 0; 2541 /* 2542 * set a bogus sector size so the normal read/write 2543 * logic in the block layer will eventually refuse any 2544 * request on this device without tripping over power 2545 * of two sector size assumptions 2546 */ 2547 sector_size = 512; 2548 } 2549 blk_queue_logical_block_size(sdp->request_queue, sector_size); 2550 blk_queue_physical_block_size(sdp->request_queue, 2551 sdkp->physical_block_size); 2552 sdkp->device->sector_size = sector_size; 2553 2554 if (sdkp->capacity > 0xffffffff) 2555 sdp->use_16_for_rw = 1; 2556 2557 } 2558 2559 /* 2560 * Print disk capacity 2561 */ 2562 static void 2563 sd_print_capacity(struct scsi_disk *sdkp, 2564 sector_t old_capacity) 2565 { 2566 int sector_size = sdkp->device->sector_size; 2567 char cap_str_2[10], cap_str_10[10]; 2568 2569 if (!sdkp->first_scan && old_capacity == sdkp->capacity) 2570 return; 2571 2572 string_get_size(sdkp->capacity, sector_size, 2573 STRING_UNITS_2, cap_str_2, sizeof(cap_str_2)); 2574 string_get_size(sdkp->capacity, sector_size, 2575 STRING_UNITS_10, cap_str_10, sizeof(cap_str_10)); 2576 2577 sd_printk(KERN_NOTICE, sdkp, 2578 "%llu %d-byte logical blocks: (%s/%s)\n", 2579 (unsigned long long)sdkp->capacity, 2580 sector_size, cap_str_10, cap_str_2); 2581 2582 if (sdkp->physical_block_size != sector_size) 2583 sd_printk(KERN_NOTICE, sdkp, 2584 "%u-byte physical blocks\n", 2585 sdkp->physical_block_size); 2586 2587 sd_zbc_print_zones(sdkp); 2588 } 2589 2590 /* called with buffer of length 512 */ 2591 static inline int 2592 sd_do_mode_sense(struct scsi_device *sdp, int dbd, int modepage, 2593 unsigned char *buffer, int len, struct scsi_mode_data *data, 2594 struct scsi_sense_hdr *sshdr) 2595 { 2596 return scsi_mode_sense(sdp, dbd, modepage, buffer, len, 2597 SD_TIMEOUT, SD_MAX_RETRIES, data, 2598 sshdr); 2599 } 2600 2601 /* 2602 * read write protect setting, if possible - called only in sd_revalidate_disk() 2603 * called with buffer of length SD_BUF_SIZE 2604 */ 2605 static void 2606 sd_read_write_protect_flag(struct scsi_disk *sdkp, unsigned char *buffer) 2607 { 2608 int res; 2609 struct scsi_device *sdp = sdkp->device; 2610 struct scsi_mode_data data; 2611 int disk_ro = get_disk_ro(sdkp->disk); 2612 int old_wp = sdkp->write_prot; 2613 2614 set_disk_ro(sdkp->disk, 0); 2615 if (sdp->skip_ms_page_3f) { 2616 sd_first_printk(KERN_NOTICE, sdkp, "Assuming Write Enabled\n"); 2617 return; 2618 } 2619 2620 if (sdp->use_192_bytes_for_3f) { 2621 res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 192, &data, NULL); 2622 } else { 2623 /* 2624 * First attempt: ask for all pages (0x3F), but only 4 bytes. 2625 * We have to start carefully: some devices hang if we ask 2626 * for more than is available. 2627 */ 2628 res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 4, &data, NULL); 2629 2630 /* 2631 * Second attempt: ask for page 0 When only page 0 is 2632 * implemented, a request for page 3F may return Sense Key 2633 * 5: Illegal Request, Sense Code 24: Invalid field in 2634 * CDB. 2635 */ 2636 if (!scsi_status_is_good(res)) 2637 res = sd_do_mode_sense(sdp, 0, 0, buffer, 4, &data, NULL); 2638 2639 /* 2640 * Third attempt: ask 255 bytes, as we did earlier. 2641 */ 2642 if (!scsi_status_is_good(res)) 2643 res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 255, 2644 &data, NULL); 2645 } 2646 2647 if (!scsi_status_is_good(res)) { 2648 sd_first_printk(KERN_WARNING, sdkp, 2649 "Test WP failed, assume Write Enabled\n"); 2650 } else { 2651 sdkp->write_prot = ((data.device_specific & 0x80) != 0); 2652 set_disk_ro(sdkp->disk, sdkp->write_prot || disk_ro); 2653 if (sdkp->first_scan || old_wp != sdkp->write_prot) { 2654 sd_printk(KERN_NOTICE, sdkp, "Write Protect is %s\n", 2655 sdkp->write_prot ? "on" : "off"); 2656 sd_printk(KERN_DEBUG, sdkp, "Mode Sense: %4ph\n", buffer); 2657 } 2658 } 2659 } 2660 2661 /* 2662 * sd_read_cache_type - called only from sd_revalidate_disk() 2663 * called with buffer of length SD_BUF_SIZE 2664 */ 2665 static void 2666 sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer) 2667 { 2668 int len = 0, res; 2669 struct scsi_device *sdp = sdkp->device; 2670 2671 int dbd; 2672 int modepage; 2673 int first_len; 2674 struct scsi_mode_data data; 2675 struct scsi_sense_hdr sshdr; 2676 int old_wce = sdkp->WCE; 2677 int old_rcd = sdkp->RCD; 2678 int old_dpofua = sdkp->DPOFUA; 2679 2680 2681 if (sdkp->cache_override) 2682 return; 2683 2684 first_len = 4; 2685 if (sdp->skip_ms_page_8) { 2686 if (sdp->type == TYPE_RBC) 2687 goto defaults; 2688 else { 2689 if (sdp->skip_ms_page_3f) 2690 goto defaults; 2691 modepage = 0x3F; 2692 if (sdp->use_192_bytes_for_3f) 2693 first_len = 192; 2694 dbd = 0; 2695 } 2696 } else if (sdp->type == TYPE_RBC) { 2697 modepage = 6; 2698 dbd = 8; 2699 } else { 2700 modepage = 8; 2701 dbd = 0; 2702 } 2703 2704 /* cautiously ask */ 2705 res = sd_do_mode_sense(sdp, dbd, modepage, buffer, first_len, 2706 &data, &sshdr); 2707 2708 if (!scsi_status_is_good(res)) 2709 goto bad_sense; 2710 2711 if (!data.header_length) { 2712 modepage = 6; 2713 first_len = 0; 2714 sd_first_printk(KERN_ERR, sdkp, 2715 "Missing header in MODE_SENSE response\n"); 2716 } 2717 2718 /* that went OK, now ask for the proper length */ 2719 len = data.length; 2720 2721 /* 2722 * We're only interested in the first three bytes, actually. 2723 * But the data cache page is defined for the first 20. 2724 */ 2725 if (len < 3) 2726 goto bad_sense; 2727 else if (len > SD_BUF_SIZE) { 2728 sd_first_printk(KERN_NOTICE, sdkp, "Truncating mode parameter " 2729 "data from %d to %d bytes\n", len, SD_BUF_SIZE); 2730 len = SD_BUF_SIZE; 2731 } 2732 if (modepage == 0x3F && sdp->use_192_bytes_for_3f) 2733 len = 192; 2734 2735 /* Get the data */ 2736 if (len > first_len) 2737 res = sd_do_mode_sense(sdp, dbd, modepage, buffer, len, 2738 &data, &sshdr); 2739 2740 if (scsi_status_is_good(res)) { 2741 int offset = data.header_length + data.block_descriptor_length; 2742 2743 while (offset < len) { 2744 u8 page_code = buffer[offset] & 0x3F; 2745 u8 spf = buffer[offset] & 0x40; 2746 2747 if (page_code == 8 || page_code == 6) { 2748 /* We're interested only in the first 3 bytes. 2749 */ 2750 if (len - offset <= 2) { 2751 sd_first_printk(KERN_ERR, sdkp, 2752 "Incomplete mode parameter " 2753 "data\n"); 2754 goto defaults; 2755 } else { 2756 modepage = page_code; 2757 goto Page_found; 2758 } 2759 } else { 2760 /* Go to the next page */ 2761 if (spf && len - offset > 3) 2762 offset += 4 + (buffer[offset+2] << 8) + 2763 buffer[offset+3]; 2764 else if (!spf && len - offset > 1) 2765 offset += 2 + buffer[offset+1]; 2766 else { 2767 sd_first_printk(KERN_ERR, sdkp, 2768 "Incomplete mode " 2769 "parameter data\n"); 2770 goto defaults; 2771 } 2772 } 2773 } 2774 2775 sd_first_printk(KERN_ERR, sdkp, "No Caching mode page found\n"); 2776 goto defaults; 2777 2778 Page_found: 2779 if (modepage == 8) { 2780 sdkp->WCE = ((buffer[offset + 2] & 0x04) != 0); 2781 sdkp->RCD = ((buffer[offset + 2] & 0x01) != 0); 2782 } else { 2783 sdkp->WCE = ((buffer[offset + 2] & 0x01) == 0); 2784 sdkp->RCD = 0; 2785 } 2786 2787 sdkp->DPOFUA = (data.device_specific & 0x10) != 0; 2788 if (sdp->broken_fua) { 2789 sd_first_printk(KERN_NOTICE, sdkp, "Disabling FUA\n"); 2790 sdkp->DPOFUA = 0; 2791 } else if (sdkp->DPOFUA && !sdkp->device->use_10_for_rw && 2792 !sdkp->device->use_16_for_rw) { 2793 sd_first_printk(KERN_NOTICE, sdkp, 2794 "Uses READ/WRITE(6), disabling FUA\n"); 2795 sdkp->DPOFUA = 0; 2796 } 2797 2798 /* No cache flush allowed for write protected devices */ 2799 if (sdkp->WCE && sdkp->write_prot) 2800 sdkp->WCE = 0; 2801 2802 if (sdkp->first_scan || old_wce != sdkp->WCE || 2803 old_rcd != sdkp->RCD || old_dpofua != sdkp->DPOFUA) 2804 sd_printk(KERN_NOTICE, sdkp, 2805 "Write cache: %s, read cache: %s, %s\n", 2806 sdkp->WCE ? "enabled" : "disabled", 2807 sdkp->RCD ? "disabled" : "enabled", 2808 sdkp->DPOFUA ? "supports DPO and FUA" 2809 : "doesn't support DPO or FUA"); 2810 2811 return; 2812 } 2813 2814 bad_sense: 2815 if (scsi_sense_valid(&sshdr) && 2816 sshdr.sense_key == ILLEGAL_REQUEST && 2817 sshdr.asc == 0x24 && sshdr.ascq == 0x0) 2818 /* Invalid field in CDB */ 2819 sd_first_printk(KERN_NOTICE, sdkp, "Cache data unavailable\n"); 2820 else 2821 sd_first_printk(KERN_ERR, sdkp, 2822 "Asking for cache data failed\n"); 2823 2824 defaults: 2825 if (sdp->wce_default_on) { 2826 sd_first_printk(KERN_NOTICE, sdkp, 2827 "Assuming drive cache: write back\n"); 2828 sdkp->WCE = 1; 2829 } else { 2830 sd_first_printk(KERN_ERR, sdkp, 2831 "Assuming drive cache: write through\n"); 2832 sdkp->WCE = 0; 2833 } 2834 sdkp->RCD = 0; 2835 sdkp->DPOFUA = 0; 2836 } 2837 2838 /* 2839 * The ATO bit indicates whether the DIF application tag is available 2840 * for use by the operating system. 2841 */ 2842 static void sd_read_app_tag_own(struct scsi_disk *sdkp, unsigned char *buffer) 2843 { 2844 int res, offset; 2845 struct scsi_device *sdp = sdkp->device; 2846 struct scsi_mode_data data; 2847 struct scsi_sense_hdr sshdr; 2848 2849 if (sdp->type != TYPE_DISK && sdp->type != TYPE_ZBC) 2850 return; 2851 2852 if (sdkp->protection_type == 0) 2853 return; 2854 2855 res = scsi_mode_sense(sdp, 1, 0x0a, buffer, 36, SD_TIMEOUT, 2856 SD_MAX_RETRIES, &data, &sshdr); 2857 2858 if (!scsi_status_is_good(res) || !data.header_length || 2859 data.length < 6) { 2860 sd_first_printk(KERN_WARNING, sdkp, 2861 "getting Control mode page failed, assume no ATO\n"); 2862 2863 if (scsi_sense_valid(&sshdr)) 2864 sd_print_sense_hdr(sdkp, &sshdr); 2865 2866 return; 2867 } 2868 2869 offset = data.header_length + data.block_descriptor_length; 2870 2871 if ((buffer[offset] & 0x3f) != 0x0a) { 2872 sd_first_printk(KERN_ERR, sdkp, "ATO Got wrong page\n"); 2873 return; 2874 } 2875 2876 if ((buffer[offset + 5] & 0x80) == 0) 2877 return; 2878 2879 sdkp->ATO = 1; 2880 2881 return; 2882 } 2883 2884 /** 2885 * sd_read_block_limits - Query disk device for preferred I/O sizes. 2886 * @sdkp: disk to query 2887 */ 2888 static void sd_read_block_limits(struct scsi_disk *sdkp) 2889 { 2890 unsigned int sector_sz = sdkp->device->sector_size; 2891 const int vpd_len = 64; 2892 unsigned char *buffer = kmalloc(vpd_len, GFP_KERNEL); 2893 2894 if (!buffer || 2895 /* Block Limits VPD */ 2896 scsi_get_vpd_page(sdkp->device, 0xb0, buffer, vpd_len)) 2897 goto out; 2898 2899 blk_queue_io_min(sdkp->disk->queue, 2900 get_unaligned_be16(&buffer[6]) * sector_sz); 2901 2902 sdkp->max_xfer_blocks = get_unaligned_be32(&buffer[8]); 2903 sdkp->opt_xfer_blocks = get_unaligned_be32(&buffer[12]); 2904 2905 if (buffer[3] == 0x3c) { 2906 unsigned int lba_count, desc_count; 2907 2908 sdkp->max_ws_blocks = (u32)get_unaligned_be64(&buffer[36]); 2909 2910 if (!sdkp->lbpme) 2911 goto out; 2912 2913 lba_count = get_unaligned_be32(&buffer[20]); 2914 desc_count = get_unaligned_be32(&buffer[24]); 2915 2916 if (lba_count && desc_count) 2917 sdkp->max_unmap_blocks = lba_count; 2918 2919 sdkp->unmap_granularity = get_unaligned_be32(&buffer[28]); 2920 2921 if (buffer[32] & 0x80) 2922 sdkp->unmap_alignment = 2923 get_unaligned_be32(&buffer[32]) & ~(1 << 31); 2924 2925 if (!sdkp->lbpvpd) { /* LBP VPD page not provided */ 2926 2927 if (sdkp->max_unmap_blocks) 2928 sd_config_discard(sdkp, SD_LBP_UNMAP); 2929 else 2930 sd_config_discard(sdkp, SD_LBP_WS16); 2931 2932 } else { /* LBP VPD page tells us what to use */ 2933 if (sdkp->lbpu && sdkp->max_unmap_blocks) 2934 sd_config_discard(sdkp, SD_LBP_UNMAP); 2935 else if (sdkp->lbpws) 2936 sd_config_discard(sdkp, SD_LBP_WS16); 2937 else if (sdkp->lbpws10) 2938 sd_config_discard(sdkp, SD_LBP_WS10); 2939 else 2940 sd_config_discard(sdkp, SD_LBP_DISABLE); 2941 } 2942 } 2943 2944 out: 2945 kfree(buffer); 2946 } 2947 2948 /** 2949 * sd_read_block_characteristics - Query block dev. characteristics 2950 * @sdkp: disk to query 2951 */ 2952 static void sd_read_block_characteristics(struct scsi_disk *sdkp) 2953 { 2954 struct request_queue *q = sdkp->disk->queue; 2955 unsigned char *buffer; 2956 u16 rot; 2957 const int vpd_len = 64; 2958 2959 buffer = kmalloc(vpd_len, GFP_KERNEL); 2960 2961 if (!buffer || 2962 /* Block Device Characteristics VPD */ 2963 scsi_get_vpd_page(sdkp->device, 0xb1, buffer, vpd_len)) 2964 goto out; 2965 2966 rot = get_unaligned_be16(&buffer[4]); 2967 2968 if (rot == 1) { 2969 blk_queue_flag_set(QUEUE_FLAG_NONROT, q); 2970 blk_queue_flag_clear(QUEUE_FLAG_ADD_RANDOM, q); 2971 } 2972 2973 if (sdkp->device->type == TYPE_ZBC) { 2974 /* Host-managed */ 2975 q->limits.zoned = BLK_ZONED_HM; 2976 } else { 2977 sdkp->zoned = (buffer[8] >> 4) & 3; 2978 if (sdkp->zoned == 1) 2979 /* Host-aware */ 2980 q->limits.zoned = BLK_ZONED_HA; 2981 else 2982 /* 2983 * Treat drive-managed devices as 2984 * regular block devices. 2985 */ 2986 q->limits.zoned = BLK_ZONED_NONE; 2987 } 2988 if (blk_queue_is_zoned(q) && sdkp->first_scan) 2989 sd_printk(KERN_NOTICE, sdkp, "Host-%s zoned block device\n", 2990 q->limits.zoned == BLK_ZONED_HM ? "managed" : "aware"); 2991 2992 out: 2993 kfree(buffer); 2994 } 2995 2996 /** 2997 * sd_read_block_provisioning - Query provisioning VPD page 2998 * @sdkp: disk to query 2999 */ 3000 static void sd_read_block_provisioning(struct scsi_disk *sdkp) 3001 { 3002 unsigned char *buffer; 3003 const int vpd_len = 8; 3004 3005 if (sdkp->lbpme == 0) 3006 return; 3007 3008 buffer = kmalloc(vpd_len, GFP_KERNEL); 3009 3010 if (!buffer || scsi_get_vpd_page(sdkp->device, 0xb2, buffer, vpd_len)) 3011 goto out; 3012 3013 sdkp->lbpvpd = 1; 3014 sdkp->lbpu = (buffer[5] >> 7) & 1; /* UNMAP */ 3015 sdkp->lbpws = (buffer[5] >> 6) & 1; /* WRITE SAME(16) with UNMAP */ 3016 sdkp->lbpws10 = (buffer[5] >> 5) & 1; /* WRITE SAME(10) with UNMAP */ 3017 3018 out: 3019 kfree(buffer); 3020 } 3021 3022 static void sd_read_write_same(struct scsi_disk *sdkp, unsigned char *buffer) 3023 { 3024 struct scsi_device *sdev = sdkp->device; 3025 3026 if (sdev->host->no_write_same) { 3027 sdev->no_write_same = 1; 3028 3029 return; 3030 } 3031 3032 if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, INQUIRY) < 0) { 3033 /* too large values might cause issues with arcmsr */ 3034 int vpd_buf_len = 64; 3035 3036 sdev->no_report_opcodes = 1; 3037 3038 /* Disable WRITE SAME if REPORT SUPPORTED OPERATION 3039 * CODES is unsupported and the device has an ATA 3040 * Information VPD page (SAT). 3041 */ 3042 if (!scsi_get_vpd_page(sdev, 0x89, buffer, vpd_buf_len)) 3043 sdev->no_write_same = 1; 3044 } 3045 3046 if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, WRITE_SAME_16) == 1) 3047 sdkp->ws16 = 1; 3048 3049 if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, WRITE_SAME) == 1) 3050 sdkp->ws10 = 1; 3051 } 3052 3053 static void sd_read_security(struct scsi_disk *sdkp, unsigned char *buffer) 3054 { 3055 struct scsi_device *sdev = sdkp->device; 3056 3057 if (!sdev->security_supported) 3058 return; 3059 3060 if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, 3061 SECURITY_PROTOCOL_IN) == 1 && 3062 scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, 3063 SECURITY_PROTOCOL_OUT) == 1) 3064 sdkp->security = 1; 3065 } 3066 3067 /* 3068 * Determine the device's preferred I/O size for reads and writes 3069 * unless the reported value is unreasonably small, large, not a 3070 * multiple of the physical block size, or simply garbage. 3071 */ 3072 static bool sd_validate_opt_xfer_size(struct scsi_disk *sdkp, 3073 unsigned int dev_max) 3074 { 3075 struct scsi_device *sdp = sdkp->device; 3076 unsigned int opt_xfer_bytes = 3077 logical_to_bytes(sdp, sdkp->opt_xfer_blocks); 3078 3079 if (sdkp->opt_xfer_blocks > dev_max) { 3080 sd_first_printk(KERN_WARNING, sdkp, 3081 "Optimal transfer size %u logical blocks " \ 3082 "> dev_max (%u logical blocks)\n", 3083 sdkp->opt_xfer_blocks, dev_max); 3084 return false; 3085 } 3086 3087 if (sdkp->opt_xfer_blocks > SD_DEF_XFER_BLOCKS) { 3088 sd_first_printk(KERN_WARNING, sdkp, 3089 "Optimal transfer size %u logical blocks " \ 3090 "> sd driver limit (%u logical blocks)\n", 3091 sdkp->opt_xfer_blocks, SD_DEF_XFER_BLOCKS); 3092 return false; 3093 } 3094 3095 if (opt_xfer_bytes < PAGE_SIZE) { 3096 sd_first_printk(KERN_WARNING, sdkp, 3097 "Optimal transfer size %u bytes < " \ 3098 "PAGE_SIZE (%u bytes)\n", 3099 opt_xfer_bytes, (unsigned int)PAGE_SIZE); 3100 return false; 3101 } 3102 3103 if (opt_xfer_bytes & (sdkp->physical_block_size - 1)) { 3104 sd_first_printk(KERN_WARNING, sdkp, 3105 "Optimal transfer size %u bytes not a " \ 3106 "multiple of physical block size (%u bytes)\n", 3107 opt_xfer_bytes, sdkp->physical_block_size); 3108 return false; 3109 } 3110 3111 sd_first_printk(KERN_INFO, sdkp, "Optimal transfer size %u bytes\n", 3112 opt_xfer_bytes); 3113 return true; 3114 } 3115 3116 /** 3117 * sd_revalidate_disk - called the first time a new disk is seen, 3118 * performs disk spin up, read_capacity, etc. 3119 * @disk: struct gendisk we care about 3120 **/ 3121 static int sd_revalidate_disk(struct gendisk *disk) 3122 { 3123 struct scsi_disk *sdkp = scsi_disk(disk); 3124 struct scsi_device *sdp = sdkp->device; 3125 struct request_queue *q = sdkp->disk->queue; 3126 sector_t old_capacity = sdkp->capacity; 3127 unsigned char *buffer; 3128 unsigned int dev_max, rw_max; 3129 3130 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, 3131 "sd_revalidate_disk\n")); 3132 3133 /* 3134 * If the device is offline, don't try and read capacity or any 3135 * of the other niceties. 3136 */ 3137 if (!scsi_device_online(sdp)) 3138 goto out; 3139 3140 buffer = kmalloc(SD_BUF_SIZE, GFP_KERNEL); 3141 if (!buffer) { 3142 sd_printk(KERN_WARNING, sdkp, "sd_revalidate_disk: Memory " 3143 "allocation failure.\n"); 3144 goto out; 3145 } 3146 3147 sd_spinup_disk(sdkp); 3148 3149 /* 3150 * Without media there is no reason to ask; moreover, some devices 3151 * react badly if we do. 3152 */ 3153 if (sdkp->media_present) { 3154 sd_read_capacity(sdkp, buffer); 3155 3156 /* 3157 * set the default to rotational. All non-rotational devices 3158 * support the block characteristics VPD page, which will 3159 * cause this to be updated correctly and any device which 3160 * doesn't support it should be treated as rotational. 3161 */ 3162 blk_queue_flag_clear(QUEUE_FLAG_NONROT, q); 3163 blk_queue_flag_set(QUEUE_FLAG_ADD_RANDOM, q); 3164 3165 if (scsi_device_supports_vpd(sdp)) { 3166 sd_read_block_provisioning(sdkp); 3167 sd_read_block_limits(sdkp); 3168 sd_read_block_characteristics(sdkp); 3169 sd_zbc_read_zones(sdkp, buffer); 3170 } 3171 3172 sd_print_capacity(sdkp, old_capacity); 3173 3174 sd_read_write_protect_flag(sdkp, buffer); 3175 sd_read_cache_type(sdkp, buffer); 3176 sd_read_app_tag_own(sdkp, buffer); 3177 sd_read_write_same(sdkp, buffer); 3178 sd_read_security(sdkp, buffer); 3179 } 3180 3181 /* 3182 * We now have all cache related info, determine how we deal 3183 * with flush requests. 3184 */ 3185 sd_set_flush_flag(sdkp); 3186 3187 /* Initial block count limit based on CDB TRANSFER LENGTH field size. */ 3188 dev_max = sdp->use_16_for_rw ? SD_MAX_XFER_BLOCKS : SD_DEF_XFER_BLOCKS; 3189 3190 /* Some devices report a maximum block count for READ/WRITE requests. */ 3191 dev_max = min_not_zero(dev_max, sdkp->max_xfer_blocks); 3192 q->limits.max_dev_sectors = logical_to_sectors(sdp, dev_max); 3193 3194 if (sd_validate_opt_xfer_size(sdkp, dev_max)) { 3195 q->limits.io_opt = logical_to_bytes(sdp, sdkp->opt_xfer_blocks); 3196 rw_max = logical_to_sectors(sdp, sdkp->opt_xfer_blocks); 3197 } else 3198 rw_max = min_not_zero(logical_to_sectors(sdp, dev_max), 3199 (sector_t)BLK_DEF_MAX_SECTORS); 3200 3201 /* Do not exceed controller limit */ 3202 rw_max = min(rw_max, queue_max_hw_sectors(q)); 3203 3204 /* 3205 * Only update max_sectors if previously unset or if the current value 3206 * exceeds the capabilities of the hardware. 3207 */ 3208 if (sdkp->first_scan || 3209 q->limits.max_sectors > q->limits.max_dev_sectors || 3210 q->limits.max_sectors > q->limits.max_hw_sectors) 3211 q->limits.max_sectors = rw_max; 3212 3213 sdkp->first_scan = 0; 3214 3215 set_capacity(disk, logical_to_sectors(sdp, sdkp->capacity)); 3216 sd_config_write_same(sdkp); 3217 kfree(buffer); 3218 3219 out: 3220 return 0; 3221 } 3222 3223 /** 3224 * sd_unlock_native_capacity - unlock native capacity 3225 * @disk: struct gendisk to set capacity for 3226 * 3227 * Block layer calls this function if it detects that partitions 3228 * on @disk reach beyond the end of the device. If the SCSI host 3229 * implements ->unlock_native_capacity() method, it's invoked to 3230 * give it a chance to adjust the device capacity. 3231 * 3232 * CONTEXT: 3233 * Defined by block layer. Might sleep. 3234 */ 3235 static void sd_unlock_native_capacity(struct gendisk *disk) 3236 { 3237 struct scsi_device *sdev = scsi_disk(disk)->device; 3238 3239 if (sdev->host->hostt->unlock_native_capacity) 3240 sdev->host->hostt->unlock_native_capacity(sdev); 3241 } 3242 3243 /** 3244 * sd_format_disk_name - format disk name 3245 * @prefix: name prefix - ie. "sd" for SCSI disks 3246 * @index: index of the disk to format name for 3247 * @buf: output buffer 3248 * @buflen: length of the output buffer 3249 * 3250 * SCSI disk names starts at sda. The 26th device is sdz and the 3251 * 27th is sdaa. The last one for two lettered suffix is sdzz 3252 * which is followed by sdaaa. 3253 * 3254 * This is basically 26 base counting with one extra 'nil' entry 3255 * at the beginning from the second digit on and can be 3256 * determined using similar method as 26 base conversion with the 3257 * index shifted -1 after each digit is computed. 3258 * 3259 * CONTEXT: 3260 * Don't care. 3261 * 3262 * RETURNS: 3263 * 0 on success, -errno on failure. 3264 */ 3265 static int sd_format_disk_name(char *prefix, int index, char *buf, int buflen) 3266 { 3267 const int base = 'z' - 'a' + 1; 3268 char *begin = buf + strlen(prefix); 3269 char *end = buf + buflen; 3270 char *p; 3271 int unit; 3272 3273 p = end - 1; 3274 *p = '\0'; 3275 unit = base; 3276 do { 3277 if (p == begin) 3278 return -EINVAL; 3279 *--p = 'a' + (index % unit); 3280 index = (index / unit) - 1; 3281 } while (index >= 0); 3282 3283 memmove(begin, p, end - p); 3284 memcpy(buf, prefix, strlen(prefix)); 3285 3286 return 0; 3287 } 3288 3289 /* 3290 * The asynchronous part of sd_probe 3291 */ 3292 static void sd_probe_async(void *data, async_cookie_t cookie) 3293 { 3294 struct scsi_disk *sdkp = data; 3295 struct scsi_device *sdp; 3296 struct gendisk *gd; 3297 u32 index; 3298 struct device *dev; 3299 3300 sdp = sdkp->device; 3301 gd = sdkp->disk; 3302 index = sdkp->index; 3303 dev = &sdp->sdev_gendev; 3304 3305 gd->major = sd_major((index & 0xf0) >> 4); 3306 gd->first_minor = ((index & 0xf) << 4) | (index & 0xfff00); 3307 3308 gd->fops = &sd_fops; 3309 gd->private_data = &sdkp->driver; 3310 gd->queue = sdkp->device->request_queue; 3311 3312 /* defaults, until the device tells us otherwise */ 3313 sdp->sector_size = 512; 3314 sdkp->capacity = 0; 3315 sdkp->media_present = 1; 3316 sdkp->write_prot = 0; 3317 sdkp->cache_override = 0; 3318 sdkp->WCE = 0; 3319 sdkp->RCD = 0; 3320 sdkp->ATO = 0; 3321 sdkp->first_scan = 1; 3322 sdkp->max_medium_access_timeouts = SD_MAX_MEDIUM_TIMEOUTS; 3323 3324 sd_revalidate_disk(gd); 3325 3326 gd->flags = GENHD_FL_EXT_DEVT; 3327 if (sdp->removable) { 3328 gd->flags |= GENHD_FL_REMOVABLE; 3329 gd->events |= DISK_EVENT_MEDIA_CHANGE; 3330 } 3331 3332 blk_pm_runtime_init(sdp->request_queue, dev); 3333 device_add_disk(dev, gd, NULL); 3334 if (sdkp->capacity) 3335 sd_dif_config_host(sdkp); 3336 3337 sd_revalidate_disk(gd); 3338 3339 if (sdkp->security) { 3340 sdkp->opal_dev = init_opal_dev(sdp, &sd_sec_submit); 3341 if (sdkp->opal_dev) 3342 sd_printk(KERN_NOTICE, sdkp, "supports TCG Opal\n"); 3343 } 3344 3345 sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n", 3346 sdp->removable ? "removable " : ""); 3347 scsi_autopm_put_device(sdp); 3348 put_device(&sdkp->dev); 3349 } 3350 3351 /** 3352 * sd_probe - called during driver initialization and whenever a 3353 * new scsi device is attached to the system. It is called once 3354 * for each scsi device (not just disks) present. 3355 * @dev: pointer to device object 3356 * 3357 * Returns 0 if successful (or not interested in this scsi device 3358 * (e.g. scanner)); 1 when there is an error. 3359 * 3360 * Note: this function is invoked from the scsi mid-level. 3361 * This function sets up the mapping between a given 3362 * <host,channel,id,lun> (found in sdp) and new device name 3363 * (e.g. /dev/sda). More precisely it is the block device major 3364 * and minor number that is chosen here. 3365 * 3366 * Assume sd_probe is not re-entrant (for time being) 3367 * Also think about sd_probe() and sd_remove() running coincidentally. 3368 **/ 3369 static int sd_probe(struct device *dev) 3370 { 3371 struct scsi_device *sdp = to_scsi_device(dev); 3372 struct scsi_disk *sdkp; 3373 struct gendisk *gd; 3374 int index; 3375 int error; 3376 3377 scsi_autopm_get_device(sdp); 3378 error = -ENODEV; 3379 if (sdp->type != TYPE_DISK && 3380 sdp->type != TYPE_ZBC && 3381 sdp->type != TYPE_MOD && 3382 sdp->type != TYPE_RBC) 3383 goto out; 3384 3385 #ifndef CONFIG_BLK_DEV_ZONED 3386 if (sdp->type == TYPE_ZBC) 3387 goto out; 3388 #endif 3389 SCSI_LOG_HLQUEUE(3, sdev_printk(KERN_INFO, sdp, 3390 "sd_probe\n")); 3391 3392 error = -ENOMEM; 3393 sdkp = kzalloc(sizeof(*sdkp), GFP_KERNEL); 3394 if (!sdkp) 3395 goto out; 3396 3397 gd = alloc_disk(SD_MINORS); 3398 if (!gd) 3399 goto out_free; 3400 3401 index = ida_alloc(&sd_index_ida, GFP_KERNEL); 3402 if (index < 0) { 3403 sdev_printk(KERN_WARNING, sdp, "sd_probe: memory exhausted.\n"); 3404 goto out_put; 3405 } 3406 3407 error = sd_format_disk_name("sd", index, gd->disk_name, DISK_NAME_LEN); 3408 if (error) { 3409 sdev_printk(KERN_WARNING, sdp, "SCSI disk (sd) name length exceeded.\n"); 3410 goto out_free_index; 3411 } 3412 3413 sdkp->device = sdp; 3414 sdkp->driver = &sd_template; 3415 sdkp->disk = gd; 3416 sdkp->index = index; 3417 atomic_set(&sdkp->openers, 0); 3418 atomic_set(&sdkp->device->ioerr_cnt, 0); 3419 3420 if (!sdp->request_queue->rq_timeout) { 3421 if (sdp->type != TYPE_MOD) 3422 blk_queue_rq_timeout(sdp->request_queue, SD_TIMEOUT); 3423 else 3424 blk_queue_rq_timeout(sdp->request_queue, 3425 SD_MOD_TIMEOUT); 3426 } 3427 3428 device_initialize(&sdkp->dev); 3429 sdkp->dev.parent = dev; 3430 sdkp->dev.class = &sd_disk_class; 3431 dev_set_name(&sdkp->dev, "%s", dev_name(dev)); 3432 3433 error = device_add(&sdkp->dev); 3434 if (error) 3435 goto out_free_index; 3436 3437 get_device(dev); 3438 dev_set_drvdata(dev, sdkp); 3439 3440 get_device(&sdkp->dev); /* prevent release before async_schedule */ 3441 async_schedule_domain(sd_probe_async, sdkp, &scsi_sd_probe_domain); 3442 3443 return 0; 3444 3445 out_free_index: 3446 ida_free(&sd_index_ida, index); 3447 out_put: 3448 put_disk(gd); 3449 out_free: 3450 kfree(sdkp); 3451 out: 3452 scsi_autopm_put_device(sdp); 3453 return error; 3454 } 3455 3456 /** 3457 * sd_remove - called whenever a scsi disk (previously recognized by 3458 * sd_probe) is detached from the system. It is called (potentially 3459 * multiple times) during sd module unload. 3460 * @dev: pointer to device object 3461 * 3462 * Note: this function is invoked from the scsi mid-level. 3463 * This function potentially frees up a device name (e.g. /dev/sdc) 3464 * that could be re-used by a subsequent sd_probe(). 3465 * This function is not called when the built-in sd driver is "exit-ed". 3466 **/ 3467 static int sd_remove(struct device *dev) 3468 { 3469 struct scsi_disk *sdkp; 3470 dev_t devt; 3471 3472 sdkp = dev_get_drvdata(dev); 3473 devt = disk_devt(sdkp->disk); 3474 scsi_autopm_get_device(sdkp->device); 3475 3476 async_synchronize_full_domain(&scsi_sd_pm_domain); 3477 async_synchronize_full_domain(&scsi_sd_probe_domain); 3478 device_del(&sdkp->dev); 3479 del_gendisk(sdkp->disk); 3480 sd_shutdown(dev); 3481 3482 free_opal_dev(sdkp->opal_dev); 3483 3484 blk_register_region(devt, SD_MINORS, NULL, 3485 sd_default_probe, NULL, NULL); 3486 3487 mutex_lock(&sd_ref_mutex); 3488 dev_set_drvdata(dev, NULL); 3489 put_device(&sdkp->dev); 3490 mutex_unlock(&sd_ref_mutex); 3491 3492 return 0; 3493 } 3494 3495 /** 3496 * scsi_disk_release - Called to free the scsi_disk structure 3497 * @dev: pointer to embedded class device 3498 * 3499 * sd_ref_mutex must be held entering this routine. Because it is 3500 * called on last put, you should always use the scsi_disk_get() 3501 * scsi_disk_put() helpers which manipulate the semaphore directly 3502 * and never do a direct put_device. 3503 **/ 3504 static void scsi_disk_release(struct device *dev) 3505 { 3506 struct scsi_disk *sdkp = to_scsi_disk(dev); 3507 struct gendisk *disk = sdkp->disk; 3508 3509 ida_free(&sd_index_ida, sdkp->index); 3510 3511 disk->private_data = NULL; 3512 put_disk(disk); 3513 put_device(&sdkp->device->sdev_gendev); 3514 3515 kfree(sdkp); 3516 } 3517 3518 static int sd_start_stop_device(struct scsi_disk *sdkp, int start) 3519 { 3520 unsigned char cmd[6] = { START_STOP }; /* START_VALID */ 3521 struct scsi_sense_hdr sshdr; 3522 struct scsi_device *sdp = sdkp->device; 3523 int res; 3524 3525 if (start) 3526 cmd[4] |= 1; /* START */ 3527 3528 if (sdp->start_stop_pwr_cond) 3529 cmd[4] |= start ? 1 << 4 : 3 << 4; /* Active or Standby */ 3530 3531 if (!scsi_device_online(sdp)) 3532 return -ENODEV; 3533 3534 res = scsi_execute(sdp, cmd, DMA_NONE, NULL, 0, NULL, &sshdr, 3535 SD_TIMEOUT, SD_MAX_RETRIES, 0, RQF_PM, NULL); 3536 if (res) { 3537 sd_print_result(sdkp, "Start/Stop Unit failed", res); 3538 if (driver_byte(res) == DRIVER_SENSE) 3539 sd_print_sense_hdr(sdkp, &sshdr); 3540 if (scsi_sense_valid(&sshdr) && 3541 /* 0x3a is medium not present */ 3542 sshdr.asc == 0x3a) 3543 res = 0; 3544 } 3545 3546 /* SCSI error codes must not go to the generic layer */ 3547 if (res) 3548 return -EIO; 3549 3550 return 0; 3551 } 3552 3553 /* 3554 * Send a SYNCHRONIZE CACHE instruction down to the device through 3555 * the normal SCSI command structure. Wait for the command to 3556 * complete. 3557 */ 3558 static void sd_shutdown(struct device *dev) 3559 { 3560 struct scsi_disk *sdkp = dev_get_drvdata(dev); 3561 3562 if (!sdkp) 3563 return; /* this can happen */ 3564 3565 if (pm_runtime_suspended(dev)) 3566 return; 3567 3568 if (sdkp->WCE && sdkp->media_present) { 3569 sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n"); 3570 sd_sync_cache(sdkp, NULL); 3571 } 3572 3573 if (system_state != SYSTEM_RESTART && sdkp->device->manage_start_stop) { 3574 sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n"); 3575 sd_start_stop_device(sdkp, 0); 3576 } 3577 } 3578 3579 static int sd_suspend_common(struct device *dev, bool ignore_stop_errors) 3580 { 3581 struct scsi_disk *sdkp = dev_get_drvdata(dev); 3582 struct scsi_sense_hdr sshdr; 3583 int ret = 0; 3584 3585 if (!sdkp) /* E.g.: runtime suspend following sd_remove() */ 3586 return 0; 3587 3588 if (sdkp->WCE && sdkp->media_present) { 3589 sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n"); 3590 ret = sd_sync_cache(sdkp, &sshdr); 3591 3592 if (ret) { 3593 /* ignore OFFLINE device */ 3594 if (ret == -ENODEV) 3595 return 0; 3596 3597 if (!scsi_sense_valid(&sshdr) || 3598 sshdr.sense_key != ILLEGAL_REQUEST) 3599 return ret; 3600 3601 /* 3602 * sshdr.sense_key == ILLEGAL_REQUEST means this drive 3603 * doesn't support sync. There's not much to do and 3604 * suspend shouldn't fail. 3605 */ 3606 ret = 0; 3607 } 3608 } 3609 3610 if (sdkp->device->manage_start_stop) { 3611 sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n"); 3612 /* an error is not worth aborting a system sleep */ 3613 ret = sd_start_stop_device(sdkp, 0); 3614 if (ignore_stop_errors) 3615 ret = 0; 3616 } 3617 3618 return ret; 3619 } 3620 3621 static int sd_suspend_system(struct device *dev) 3622 { 3623 return sd_suspend_common(dev, true); 3624 } 3625 3626 static int sd_suspend_runtime(struct device *dev) 3627 { 3628 return sd_suspend_common(dev, false); 3629 } 3630 3631 static int sd_resume(struct device *dev) 3632 { 3633 struct scsi_disk *sdkp = dev_get_drvdata(dev); 3634 int ret; 3635 3636 if (!sdkp) /* E.g.: runtime resume at the start of sd_probe() */ 3637 return 0; 3638 3639 if (!sdkp->device->manage_start_stop) 3640 return 0; 3641 3642 sd_printk(KERN_NOTICE, sdkp, "Starting disk\n"); 3643 ret = sd_start_stop_device(sdkp, 1); 3644 if (!ret) 3645 opal_unlock_from_suspend(sdkp->opal_dev); 3646 return ret; 3647 } 3648 3649 /** 3650 * init_sd - entry point for this driver (both when built in or when 3651 * a module). 3652 * 3653 * Note: this function registers this driver with the scsi mid-level. 3654 **/ 3655 static int __init init_sd(void) 3656 { 3657 int majors = 0, i, err; 3658 3659 SCSI_LOG_HLQUEUE(3, printk("init_sd: sd driver entry point\n")); 3660 3661 for (i = 0; i < SD_MAJORS; i++) { 3662 if (register_blkdev(sd_major(i), "sd") != 0) 3663 continue; 3664 majors++; 3665 blk_register_region(sd_major(i), SD_MINORS, NULL, 3666 sd_default_probe, NULL, NULL); 3667 } 3668 3669 if (!majors) 3670 return -ENODEV; 3671 3672 err = class_register(&sd_disk_class); 3673 if (err) 3674 goto err_out; 3675 3676 sd_cdb_cache = kmem_cache_create("sd_ext_cdb", SD_EXT_CDB_SIZE, 3677 0, 0, NULL); 3678 if (!sd_cdb_cache) { 3679 printk(KERN_ERR "sd: can't init extended cdb cache\n"); 3680 err = -ENOMEM; 3681 goto err_out_class; 3682 } 3683 3684 sd_cdb_pool = mempool_create_slab_pool(SD_MEMPOOL_SIZE, sd_cdb_cache); 3685 if (!sd_cdb_pool) { 3686 printk(KERN_ERR "sd: can't init extended cdb pool\n"); 3687 err = -ENOMEM; 3688 goto err_out_cache; 3689 } 3690 3691 sd_page_pool = mempool_create_page_pool(SD_MEMPOOL_SIZE, 0); 3692 if (!sd_page_pool) { 3693 printk(KERN_ERR "sd: can't init discard page pool\n"); 3694 err = -ENOMEM; 3695 goto err_out_ppool; 3696 } 3697 3698 err = scsi_register_driver(&sd_template.gendrv); 3699 if (err) 3700 goto err_out_driver; 3701 3702 return 0; 3703 3704 err_out_driver: 3705 mempool_destroy(sd_page_pool); 3706 3707 err_out_ppool: 3708 mempool_destroy(sd_cdb_pool); 3709 3710 err_out_cache: 3711 kmem_cache_destroy(sd_cdb_cache); 3712 3713 err_out_class: 3714 class_unregister(&sd_disk_class); 3715 err_out: 3716 for (i = 0; i < SD_MAJORS; i++) 3717 unregister_blkdev(sd_major(i), "sd"); 3718 return err; 3719 } 3720 3721 /** 3722 * exit_sd - exit point for this driver (when it is a module). 3723 * 3724 * Note: this function unregisters this driver from the scsi mid-level. 3725 **/ 3726 static void __exit exit_sd(void) 3727 { 3728 int i; 3729 3730 SCSI_LOG_HLQUEUE(3, printk("exit_sd: exiting sd driver\n")); 3731 3732 scsi_unregister_driver(&sd_template.gendrv); 3733 mempool_destroy(sd_cdb_pool); 3734 mempool_destroy(sd_page_pool); 3735 kmem_cache_destroy(sd_cdb_cache); 3736 3737 class_unregister(&sd_disk_class); 3738 3739 for (i = 0; i < SD_MAJORS; i++) { 3740 blk_unregister_region(sd_major(i), SD_MINORS); 3741 unregister_blkdev(sd_major(i), "sd"); 3742 } 3743 } 3744 3745 module_init(init_sd); 3746 module_exit(exit_sd); 3747 3748 static void sd_print_sense_hdr(struct scsi_disk *sdkp, 3749 struct scsi_sense_hdr *sshdr) 3750 { 3751 scsi_print_sense_hdr(sdkp->device, 3752 sdkp->disk ? sdkp->disk->disk_name : NULL, sshdr); 3753 } 3754 3755 static void sd_print_result(const struct scsi_disk *sdkp, const char *msg, 3756 int result) 3757 { 3758 const char *hb_string = scsi_hostbyte_string(result); 3759 const char *db_string = scsi_driverbyte_string(result); 3760 3761 if (hb_string || db_string) 3762 sd_printk(KERN_INFO, sdkp, 3763 "%s: Result: hostbyte=%s driverbyte=%s\n", msg, 3764 hb_string ? hb_string : "invalid", 3765 db_string ? db_string : "invalid"); 3766 else 3767 sd_printk(KERN_INFO, sdkp, 3768 "%s: Result: hostbyte=0x%02x driverbyte=0x%02x\n", 3769 msg, host_byte(result), driver_byte(result)); 3770 } 3771 3772