xref: /openbmc/linux/drivers/scsi/sd.c (revision 0d456bad)
1 /*
2  *      sd.c Copyright (C) 1992 Drew Eckhardt
3  *           Copyright (C) 1993, 1994, 1995, 1999 Eric Youngdale
4  *
5  *      Linux scsi disk driver
6  *              Initial versions: Drew Eckhardt
7  *              Subsequent revisions: Eric Youngdale
8  *	Modification history:
9  *       - Drew Eckhardt <drew@colorado.edu> original
10  *       - Eric Youngdale <eric@andante.org> add scatter-gather, multiple
11  *         outstanding request, and other enhancements.
12  *         Support loadable low-level scsi drivers.
13  *       - Jirka Hanika <geo@ff.cuni.cz> support more scsi disks using
14  *         eight major numbers.
15  *       - Richard Gooch <rgooch@atnf.csiro.au> support devfs.
16  *	 - Torben Mathiasen <tmm@image.dk> Resource allocation fixes in
17  *	   sd_init and cleanups.
18  *	 - Alex Davis <letmein@erols.com> Fix problem where partition info
19  *	   not being read in sd_open. Fix problem where removable media
20  *	   could be ejected after sd_open.
21  *	 - Douglas Gilbert <dgilbert@interlog.com> cleanup for lk 2.5.x
22  *	 - Badari Pulavarty <pbadari@us.ibm.com>, Matthew Wilcox
23  *	   <willy@debian.org>, Kurt Garloff <garloff@suse.de>:
24  *	   Support 32k/1M disks.
25  *
26  *	Logging policy (needs CONFIG_SCSI_LOGGING defined):
27  *	 - setting up transfer: SCSI_LOG_HLQUEUE levels 1 and 2
28  *	 - end of transfer (bh + scsi_lib): SCSI_LOG_HLCOMPLETE level 1
29  *	 - entering sd_ioctl: SCSI_LOG_IOCTL level 1
30  *	 - entering other commands: SCSI_LOG_HLQUEUE level 3
31  *	Note: when the logging level is set by the user, it must be greater
32  *	than the level indicated above to trigger output.
33  */
34 
35 #include <linux/module.h>
36 #include <linux/fs.h>
37 #include <linux/kernel.h>
38 #include <linux/mm.h>
39 #include <linux/bio.h>
40 #include <linux/genhd.h>
41 #include <linux/hdreg.h>
42 #include <linux/errno.h>
43 #include <linux/idr.h>
44 #include <linux/interrupt.h>
45 #include <linux/init.h>
46 #include <linux/blkdev.h>
47 #include <linux/blkpg.h>
48 #include <linux/delay.h>
49 #include <linux/mutex.h>
50 #include <linux/string_helpers.h>
51 #include <linux/async.h>
52 #include <linux/slab.h>
53 #include <linux/pm_runtime.h>
54 #include <asm/uaccess.h>
55 #include <asm/unaligned.h>
56 
57 #include <scsi/scsi.h>
58 #include <scsi/scsi_cmnd.h>
59 #include <scsi/scsi_dbg.h>
60 #include <scsi/scsi_device.h>
61 #include <scsi/scsi_driver.h>
62 #include <scsi/scsi_eh.h>
63 #include <scsi/scsi_host.h>
64 #include <scsi/scsi_ioctl.h>
65 #include <scsi/scsicam.h>
66 
67 #include "sd.h"
68 #include "scsi_priv.h"
69 #include "scsi_logging.h"
70 
71 MODULE_AUTHOR("Eric Youngdale");
72 MODULE_DESCRIPTION("SCSI disk (sd) driver");
73 MODULE_LICENSE("GPL");
74 
75 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK0_MAJOR);
76 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK1_MAJOR);
77 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK2_MAJOR);
78 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK3_MAJOR);
79 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK4_MAJOR);
80 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK5_MAJOR);
81 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK6_MAJOR);
82 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK7_MAJOR);
83 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK8_MAJOR);
84 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK9_MAJOR);
85 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK10_MAJOR);
86 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK11_MAJOR);
87 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK12_MAJOR);
88 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK13_MAJOR);
89 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK14_MAJOR);
90 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK15_MAJOR);
91 MODULE_ALIAS_SCSI_DEVICE(TYPE_DISK);
92 MODULE_ALIAS_SCSI_DEVICE(TYPE_MOD);
93 MODULE_ALIAS_SCSI_DEVICE(TYPE_RBC);
94 
95 #if !defined(CONFIG_DEBUG_BLOCK_EXT_DEVT)
96 #define SD_MINORS	16
97 #else
98 #define SD_MINORS	0
99 #endif
100 
101 static void sd_config_discard(struct scsi_disk *, unsigned int);
102 static void sd_config_write_same(struct scsi_disk *);
103 static int  sd_revalidate_disk(struct gendisk *);
104 static void sd_unlock_native_capacity(struct gendisk *disk);
105 static int  sd_probe(struct device *);
106 static int  sd_remove(struct device *);
107 static void sd_shutdown(struct device *);
108 static int sd_suspend(struct device *);
109 static int sd_resume(struct device *);
110 static void sd_rescan(struct device *);
111 static int sd_done(struct scsi_cmnd *);
112 static int sd_eh_action(struct scsi_cmnd *, unsigned char *, int, int);
113 static void sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer);
114 static void scsi_disk_release(struct device *cdev);
115 static void sd_print_sense_hdr(struct scsi_disk *, struct scsi_sense_hdr *);
116 static void sd_print_result(struct scsi_disk *, int);
117 
118 static DEFINE_SPINLOCK(sd_index_lock);
119 static DEFINE_IDA(sd_index_ida);
120 
121 /* This semaphore is used to mediate the 0->1 reference get in the
122  * face of object destruction (i.e. we can't allow a get on an
123  * object after last put) */
124 static DEFINE_MUTEX(sd_ref_mutex);
125 
126 static struct kmem_cache *sd_cdb_cache;
127 static mempool_t *sd_cdb_pool;
128 
129 static const char *sd_cache_types[] = {
130 	"write through", "none", "write back",
131 	"write back, no read (daft)"
132 };
133 
134 static ssize_t
135 sd_store_cache_type(struct device *dev, struct device_attribute *attr,
136 		    const char *buf, size_t count)
137 {
138 	int i, ct = -1, rcd, wce, sp;
139 	struct scsi_disk *sdkp = to_scsi_disk(dev);
140 	struct scsi_device *sdp = sdkp->device;
141 	char buffer[64];
142 	char *buffer_data;
143 	struct scsi_mode_data data;
144 	struct scsi_sense_hdr sshdr;
145 	int len;
146 
147 	if (sdp->type != TYPE_DISK)
148 		/* no cache control on RBC devices; theoretically they
149 		 * can do it, but there's probably so many exceptions
150 		 * it's not worth the risk */
151 		return -EINVAL;
152 
153 	for (i = 0; i < ARRAY_SIZE(sd_cache_types); i++) {
154 		len = strlen(sd_cache_types[i]);
155 		if (strncmp(sd_cache_types[i], buf, len) == 0 &&
156 		    buf[len] == '\n') {
157 			ct = i;
158 			break;
159 		}
160 	}
161 	if (ct < 0)
162 		return -EINVAL;
163 	rcd = ct & 0x01 ? 1 : 0;
164 	wce = ct & 0x02 ? 1 : 0;
165 	if (scsi_mode_sense(sdp, 0x08, 8, buffer, sizeof(buffer), SD_TIMEOUT,
166 			    SD_MAX_RETRIES, &data, NULL))
167 		return -EINVAL;
168 	len = min_t(size_t, sizeof(buffer), data.length - data.header_length -
169 		  data.block_descriptor_length);
170 	buffer_data = buffer + data.header_length +
171 		data.block_descriptor_length;
172 	buffer_data[2] &= ~0x05;
173 	buffer_data[2] |= wce << 2 | rcd;
174 	sp = buffer_data[0] & 0x80 ? 1 : 0;
175 
176 	if (scsi_mode_select(sdp, 1, sp, 8, buffer_data, len, SD_TIMEOUT,
177 			     SD_MAX_RETRIES, &data, &sshdr)) {
178 		if (scsi_sense_valid(&sshdr))
179 			sd_print_sense_hdr(sdkp, &sshdr);
180 		return -EINVAL;
181 	}
182 	revalidate_disk(sdkp->disk);
183 	return count;
184 }
185 
186 static ssize_t
187 sd_store_manage_start_stop(struct device *dev, struct device_attribute *attr,
188 			   const char *buf, size_t count)
189 {
190 	struct scsi_disk *sdkp = to_scsi_disk(dev);
191 	struct scsi_device *sdp = sdkp->device;
192 
193 	if (!capable(CAP_SYS_ADMIN))
194 		return -EACCES;
195 
196 	sdp->manage_start_stop = simple_strtoul(buf, NULL, 10);
197 
198 	return count;
199 }
200 
201 static ssize_t
202 sd_store_allow_restart(struct device *dev, struct device_attribute *attr,
203 		       const char *buf, size_t count)
204 {
205 	struct scsi_disk *sdkp = to_scsi_disk(dev);
206 	struct scsi_device *sdp = sdkp->device;
207 
208 	if (!capable(CAP_SYS_ADMIN))
209 		return -EACCES;
210 
211 	if (sdp->type != TYPE_DISK)
212 		return -EINVAL;
213 
214 	sdp->allow_restart = simple_strtoul(buf, NULL, 10);
215 
216 	return count;
217 }
218 
219 static ssize_t
220 sd_show_cache_type(struct device *dev, struct device_attribute *attr,
221 		   char *buf)
222 {
223 	struct scsi_disk *sdkp = to_scsi_disk(dev);
224 	int ct = sdkp->RCD + 2*sdkp->WCE;
225 
226 	return snprintf(buf, 40, "%s\n", sd_cache_types[ct]);
227 }
228 
229 static ssize_t
230 sd_show_fua(struct device *dev, struct device_attribute *attr, char *buf)
231 {
232 	struct scsi_disk *sdkp = to_scsi_disk(dev);
233 
234 	return snprintf(buf, 20, "%u\n", sdkp->DPOFUA);
235 }
236 
237 static ssize_t
238 sd_show_manage_start_stop(struct device *dev, struct device_attribute *attr,
239 			  char *buf)
240 {
241 	struct scsi_disk *sdkp = to_scsi_disk(dev);
242 	struct scsi_device *sdp = sdkp->device;
243 
244 	return snprintf(buf, 20, "%u\n", sdp->manage_start_stop);
245 }
246 
247 static ssize_t
248 sd_show_allow_restart(struct device *dev, struct device_attribute *attr,
249 		      char *buf)
250 {
251 	struct scsi_disk *sdkp = to_scsi_disk(dev);
252 
253 	return snprintf(buf, 40, "%d\n", sdkp->device->allow_restart);
254 }
255 
256 static ssize_t
257 sd_show_protection_type(struct device *dev, struct device_attribute *attr,
258 			char *buf)
259 {
260 	struct scsi_disk *sdkp = to_scsi_disk(dev);
261 
262 	return snprintf(buf, 20, "%u\n", sdkp->protection_type);
263 }
264 
265 static ssize_t
266 sd_store_protection_type(struct device *dev, struct device_attribute *attr,
267 			 const char *buf, size_t count)
268 {
269 	struct scsi_disk *sdkp = to_scsi_disk(dev);
270 	unsigned int val;
271 	int err;
272 
273 	if (!capable(CAP_SYS_ADMIN))
274 		return -EACCES;
275 
276 	err = kstrtouint(buf, 10, &val);
277 
278 	if (err)
279 		return err;
280 
281 	if (val >= 0 && val <= SD_DIF_TYPE3_PROTECTION)
282 		sdkp->protection_type = val;
283 
284 	return count;
285 }
286 
287 static ssize_t
288 sd_show_protection_mode(struct device *dev, struct device_attribute *attr,
289 			char *buf)
290 {
291 	struct scsi_disk *sdkp = to_scsi_disk(dev);
292 	struct scsi_device *sdp = sdkp->device;
293 	unsigned int dif, dix;
294 
295 	dif = scsi_host_dif_capable(sdp->host, sdkp->protection_type);
296 	dix = scsi_host_dix_capable(sdp->host, sdkp->protection_type);
297 
298 	if (!dix && scsi_host_dix_capable(sdp->host, SD_DIF_TYPE0_PROTECTION)) {
299 		dif = 0;
300 		dix = 1;
301 	}
302 
303 	if (!dif && !dix)
304 		return snprintf(buf, 20, "none\n");
305 
306 	return snprintf(buf, 20, "%s%u\n", dix ? "dix" : "dif", dif);
307 }
308 
309 static ssize_t
310 sd_show_app_tag_own(struct device *dev, struct device_attribute *attr,
311 		    char *buf)
312 {
313 	struct scsi_disk *sdkp = to_scsi_disk(dev);
314 
315 	return snprintf(buf, 20, "%u\n", sdkp->ATO);
316 }
317 
318 static ssize_t
319 sd_show_thin_provisioning(struct device *dev, struct device_attribute *attr,
320 			  char *buf)
321 {
322 	struct scsi_disk *sdkp = to_scsi_disk(dev);
323 
324 	return snprintf(buf, 20, "%u\n", sdkp->lbpme);
325 }
326 
327 static const char *lbp_mode[] = {
328 	[SD_LBP_FULL]		= "full",
329 	[SD_LBP_UNMAP]		= "unmap",
330 	[SD_LBP_WS16]		= "writesame_16",
331 	[SD_LBP_WS10]		= "writesame_10",
332 	[SD_LBP_ZERO]		= "writesame_zero",
333 	[SD_LBP_DISABLE]	= "disabled",
334 };
335 
336 static ssize_t
337 sd_show_provisioning_mode(struct device *dev, struct device_attribute *attr,
338 			  char *buf)
339 {
340 	struct scsi_disk *sdkp = to_scsi_disk(dev);
341 
342 	return snprintf(buf, 20, "%s\n", lbp_mode[sdkp->provisioning_mode]);
343 }
344 
345 static ssize_t
346 sd_store_provisioning_mode(struct device *dev, struct device_attribute *attr,
347 			   const char *buf, size_t count)
348 {
349 	struct scsi_disk *sdkp = to_scsi_disk(dev);
350 	struct scsi_device *sdp = sdkp->device;
351 
352 	if (!capable(CAP_SYS_ADMIN))
353 		return -EACCES;
354 
355 	if (sdp->type != TYPE_DISK)
356 		return -EINVAL;
357 
358 	if (!strncmp(buf, lbp_mode[SD_LBP_UNMAP], 20))
359 		sd_config_discard(sdkp, SD_LBP_UNMAP);
360 	else if (!strncmp(buf, lbp_mode[SD_LBP_WS16], 20))
361 		sd_config_discard(sdkp, SD_LBP_WS16);
362 	else if (!strncmp(buf, lbp_mode[SD_LBP_WS10], 20))
363 		sd_config_discard(sdkp, SD_LBP_WS10);
364 	else if (!strncmp(buf, lbp_mode[SD_LBP_ZERO], 20))
365 		sd_config_discard(sdkp, SD_LBP_ZERO);
366 	else if (!strncmp(buf, lbp_mode[SD_LBP_DISABLE], 20))
367 		sd_config_discard(sdkp, SD_LBP_DISABLE);
368 	else
369 		return -EINVAL;
370 
371 	return count;
372 }
373 
374 static ssize_t
375 sd_show_max_medium_access_timeouts(struct device *dev,
376 				   struct device_attribute *attr, char *buf)
377 {
378 	struct scsi_disk *sdkp = to_scsi_disk(dev);
379 
380 	return snprintf(buf, 20, "%u\n", sdkp->max_medium_access_timeouts);
381 }
382 
383 static ssize_t
384 sd_store_max_medium_access_timeouts(struct device *dev,
385 				    struct device_attribute *attr,
386 				    const char *buf, size_t count)
387 {
388 	struct scsi_disk *sdkp = to_scsi_disk(dev);
389 	int err;
390 
391 	if (!capable(CAP_SYS_ADMIN))
392 		return -EACCES;
393 
394 	err = kstrtouint(buf, 10, &sdkp->max_medium_access_timeouts);
395 
396 	return err ? err : count;
397 }
398 
399 static ssize_t
400 sd_show_write_same_blocks(struct device *dev, struct device_attribute *attr,
401 			  char *buf)
402 {
403 	struct scsi_disk *sdkp = to_scsi_disk(dev);
404 
405 	return snprintf(buf, 20, "%u\n", sdkp->max_ws_blocks);
406 }
407 
408 static ssize_t
409 sd_store_write_same_blocks(struct device *dev, struct device_attribute *attr,
410 			   const char *buf, size_t count)
411 {
412 	struct scsi_disk *sdkp = to_scsi_disk(dev);
413 	struct scsi_device *sdp = sdkp->device;
414 	unsigned long max;
415 	int err;
416 
417 	if (!capable(CAP_SYS_ADMIN))
418 		return -EACCES;
419 
420 	if (sdp->type != TYPE_DISK)
421 		return -EINVAL;
422 
423 	err = kstrtoul(buf, 10, &max);
424 
425 	if (err)
426 		return err;
427 
428 	if (max == 0)
429 		sdp->no_write_same = 1;
430 	else if (max <= SD_MAX_WS16_BLOCKS)
431 		sdkp->max_ws_blocks = max;
432 
433 	sd_config_write_same(sdkp);
434 
435 	return count;
436 }
437 
438 static struct device_attribute sd_disk_attrs[] = {
439 	__ATTR(cache_type, S_IRUGO|S_IWUSR, sd_show_cache_type,
440 	       sd_store_cache_type),
441 	__ATTR(FUA, S_IRUGO, sd_show_fua, NULL),
442 	__ATTR(allow_restart, S_IRUGO|S_IWUSR, sd_show_allow_restart,
443 	       sd_store_allow_restart),
444 	__ATTR(manage_start_stop, S_IRUGO|S_IWUSR, sd_show_manage_start_stop,
445 	       sd_store_manage_start_stop),
446 	__ATTR(protection_type, S_IRUGO|S_IWUSR, sd_show_protection_type,
447 	       sd_store_protection_type),
448 	__ATTR(protection_mode, S_IRUGO, sd_show_protection_mode, NULL),
449 	__ATTR(app_tag_own, S_IRUGO, sd_show_app_tag_own, NULL),
450 	__ATTR(thin_provisioning, S_IRUGO, sd_show_thin_provisioning, NULL),
451 	__ATTR(provisioning_mode, S_IRUGO|S_IWUSR, sd_show_provisioning_mode,
452 	       sd_store_provisioning_mode),
453 	__ATTR(max_write_same_blocks, S_IRUGO|S_IWUSR,
454 	       sd_show_write_same_blocks, sd_store_write_same_blocks),
455 	__ATTR(max_medium_access_timeouts, S_IRUGO|S_IWUSR,
456 	       sd_show_max_medium_access_timeouts,
457 	       sd_store_max_medium_access_timeouts),
458 	__ATTR_NULL,
459 };
460 
461 static struct class sd_disk_class = {
462 	.name		= "scsi_disk",
463 	.owner		= THIS_MODULE,
464 	.dev_release	= scsi_disk_release,
465 	.dev_attrs	= sd_disk_attrs,
466 };
467 
468 static const struct dev_pm_ops sd_pm_ops = {
469 	.suspend		= sd_suspend,
470 	.resume			= sd_resume,
471 	.poweroff		= sd_suspend,
472 	.restore		= sd_resume,
473 	.runtime_suspend	= sd_suspend,
474 	.runtime_resume		= sd_resume,
475 };
476 
477 static struct scsi_driver sd_template = {
478 	.owner			= THIS_MODULE,
479 	.gendrv = {
480 		.name		= "sd",
481 		.probe		= sd_probe,
482 		.remove		= sd_remove,
483 		.shutdown	= sd_shutdown,
484 		.pm		= &sd_pm_ops,
485 	},
486 	.rescan			= sd_rescan,
487 	.done			= sd_done,
488 	.eh_action		= sd_eh_action,
489 };
490 
491 /*
492  * Device no to disk mapping:
493  *
494  *       major         disc2     disc  p1
495  *   |............|.............|....|....| <- dev_t
496  *    31        20 19          8 7  4 3  0
497  *
498  * Inside a major, we have 16k disks, however mapped non-
499  * contiguously. The first 16 disks are for major0, the next
500  * ones with major1, ... Disk 256 is for major0 again, disk 272
501  * for major1, ...
502  * As we stay compatible with our numbering scheme, we can reuse
503  * the well-know SCSI majors 8, 65--71, 136--143.
504  */
505 static int sd_major(int major_idx)
506 {
507 	switch (major_idx) {
508 	case 0:
509 		return SCSI_DISK0_MAJOR;
510 	case 1 ... 7:
511 		return SCSI_DISK1_MAJOR + major_idx - 1;
512 	case 8 ... 15:
513 		return SCSI_DISK8_MAJOR + major_idx - 8;
514 	default:
515 		BUG();
516 		return 0;	/* shut up gcc */
517 	}
518 }
519 
520 static struct scsi_disk *__scsi_disk_get(struct gendisk *disk)
521 {
522 	struct scsi_disk *sdkp = NULL;
523 
524 	if (disk->private_data) {
525 		sdkp = scsi_disk(disk);
526 		if (scsi_device_get(sdkp->device) == 0)
527 			get_device(&sdkp->dev);
528 		else
529 			sdkp = NULL;
530 	}
531 	return sdkp;
532 }
533 
534 static struct scsi_disk *scsi_disk_get(struct gendisk *disk)
535 {
536 	struct scsi_disk *sdkp;
537 
538 	mutex_lock(&sd_ref_mutex);
539 	sdkp = __scsi_disk_get(disk);
540 	mutex_unlock(&sd_ref_mutex);
541 	return sdkp;
542 }
543 
544 static struct scsi_disk *scsi_disk_get_from_dev(struct device *dev)
545 {
546 	struct scsi_disk *sdkp;
547 
548 	mutex_lock(&sd_ref_mutex);
549 	sdkp = dev_get_drvdata(dev);
550 	if (sdkp)
551 		sdkp = __scsi_disk_get(sdkp->disk);
552 	mutex_unlock(&sd_ref_mutex);
553 	return sdkp;
554 }
555 
556 static void scsi_disk_put(struct scsi_disk *sdkp)
557 {
558 	struct scsi_device *sdev = sdkp->device;
559 
560 	mutex_lock(&sd_ref_mutex);
561 	put_device(&sdkp->dev);
562 	scsi_device_put(sdev);
563 	mutex_unlock(&sd_ref_mutex);
564 }
565 
566 static void sd_prot_op(struct scsi_cmnd *scmd, unsigned int dif)
567 {
568 	unsigned int prot_op = SCSI_PROT_NORMAL;
569 	unsigned int dix = scsi_prot_sg_count(scmd);
570 
571 	if (scmd->sc_data_direction == DMA_FROM_DEVICE) {
572 		if (dif && dix)
573 			prot_op = SCSI_PROT_READ_PASS;
574 		else if (dif && !dix)
575 			prot_op = SCSI_PROT_READ_STRIP;
576 		else if (!dif && dix)
577 			prot_op = SCSI_PROT_READ_INSERT;
578 	} else {
579 		if (dif && dix)
580 			prot_op = SCSI_PROT_WRITE_PASS;
581 		else if (dif && !dix)
582 			prot_op = SCSI_PROT_WRITE_INSERT;
583 		else if (!dif && dix)
584 			prot_op = SCSI_PROT_WRITE_STRIP;
585 	}
586 
587 	scsi_set_prot_op(scmd, prot_op);
588 	scsi_set_prot_type(scmd, dif);
589 }
590 
591 static void sd_config_discard(struct scsi_disk *sdkp, unsigned int mode)
592 {
593 	struct request_queue *q = sdkp->disk->queue;
594 	unsigned int logical_block_size = sdkp->device->sector_size;
595 	unsigned int max_blocks = 0;
596 
597 	q->limits.discard_zeroes_data = sdkp->lbprz;
598 	q->limits.discard_alignment = sdkp->unmap_alignment *
599 		logical_block_size;
600 	q->limits.discard_granularity =
601 		max(sdkp->physical_block_size,
602 		    sdkp->unmap_granularity * logical_block_size);
603 
604 	sdkp->provisioning_mode = mode;
605 
606 	switch (mode) {
607 
608 	case SD_LBP_DISABLE:
609 		q->limits.max_discard_sectors = 0;
610 		queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, q);
611 		return;
612 
613 	case SD_LBP_UNMAP:
614 		max_blocks = min_not_zero(sdkp->max_unmap_blocks,
615 					  (u32)SD_MAX_WS16_BLOCKS);
616 		break;
617 
618 	case SD_LBP_WS16:
619 		max_blocks = min_not_zero(sdkp->max_ws_blocks,
620 					  (u32)SD_MAX_WS16_BLOCKS);
621 		break;
622 
623 	case SD_LBP_WS10:
624 		max_blocks = min_not_zero(sdkp->max_ws_blocks,
625 					  (u32)SD_MAX_WS10_BLOCKS);
626 		break;
627 
628 	case SD_LBP_ZERO:
629 		max_blocks = min_not_zero(sdkp->max_ws_blocks,
630 					  (u32)SD_MAX_WS10_BLOCKS);
631 		q->limits.discard_zeroes_data = 1;
632 		break;
633 	}
634 
635 	q->limits.max_discard_sectors = max_blocks * (logical_block_size >> 9);
636 	queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, q);
637 }
638 
639 /**
640  * sd_setup_discard_cmnd - unmap blocks on thinly provisioned device
641  * @sdp: scsi device to operate one
642  * @rq: Request to prepare
643  *
644  * Will issue either UNMAP or WRITE SAME(16) depending on preference
645  * indicated by target device.
646  **/
647 static int sd_setup_discard_cmnd(struct scsi_device *sdp, struct request *rq)
648 {
649 	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
650 	sector_t sector = blk_rq_pos(rq);
651 	unsigned int nr_sectors = blk_rq_sectors(rq);
652 	unsigned int nr_bytes = blk_rq_bytes(rq);
653 	unsigned int len;
654 	int ret;
655 	char *buf;
656 	struct page *page;
657 
658 	sector >>= ilog2(sdp->sector_size) - 9;
659 	nr_sectors >>= ilog2(sdp->sector_size) - 9;
660 	rq->timeout = SD_TIMEOUT;
661 
662 	memset(rq->cmd, 0, rq->cmd_len);
663 
664 	page = alloc_page(GFP_ATOMIC | __GFP_ZERO);
665 	if (!page)
666 		return BLKPREP_DEFER;
667 
668 	switch (sdkp->provisioning_mode) {
669 	case SD_LBP_UNMAP:
670 		buf = page_address(page);
671 
672 		rq->cmd_len = 10;
673 		rq->cmd[0] = UNMAP;
674 		rq->cmd[8] = 24;
675 
676 		put_unaligned_be16(6 + 16, &buf[0]);
677 		put_unaligned_be16(16, &buf[2]);
678 		put_unaligned_be64(sector, &buf[8]);
679 		put_unaligned_be32(nr_sectors, &buf[16]);
680 
681 		len = 24;
682 		break;
683 
684 	case SD_LBP_WS16:
685 		rq->cmd_len = 16;
686 		rq->cmd[0] = WRITE_SAME_16;
687 		rq->cmd[1] = 0x8; /* UNMAP */
688 		put_unaligned_be64(sector, &rq->cmd[2]);
689 		put_unaligned_be32(nr_sectors, &rq->cmd[10]);
690 
691 		len = sdkp->device->sector_size;
692 		break;
693 
694 	case SD_LBP_WS10:
695 	case SD_LBP_ZERO:
696 		rq->cmd_len = 10;
697 		rq->cmd[0] = WRITE_SAME;
698 		if (sdkp->provisioning_mode == SD_LBP_WS10)
699 			rq->cmd[1] = 0x8; /* UNMAP */
700 		put_unaligned_be32(sector, &rq->cmd[2]);
701 		put_unaligned_be16(nr_sectors, &rq->cmd[7]);
702 
703 		len = sdkp->device->sector_size;
704 		break;
705 
706 	default:
707 		ret = BLKPREP_KILL;
708 		goto out;
709 	}
710 
711 	blk_add_request_payload(rq, page, len);
712 	ret = scsi_setup_blk_pc_cmnd(sdp, rq);
713 	rq->buffer = page_address(page);
714 	rq->__data_len = nr_bytes;
715 
716 out:
717 	if (ret != BLKPREP_OK) {
718 		__free_page(page);
719 		rq->buffer = NULL;
720 	}
721 	return ret;
722 }
723 
724 static void sd_config_write_same(struct scsi_disk *sdkp)
725 {
726 	struct request_queue *q = sdkp->disk->queue;
727 	unsigned int logical_block_size = sdkp->device->sector_size;
728 	unsigned int blocks = 0;
729 
730 	if (sdkp->device->no_write_same) {
731 		sdkp->max_ws_blocks = 0;
732 		goto out;
733 	}
734 
735 	/* Some devices can not handle block counts above 0xffff despite
736 	 * supporting WRITE SAME(16). Consequently we default to 64k
737 	 * blocks per I/O unless the device explicitly advertises a
738 	 * bigger limit.
739 	 */
740 	if (sdkp->max_ws_blocks == 0)
741 		sdkp->max_ws_blocks = SD_MAX_WS10_BLOCKS;
742 
743 	if (sdkp->ws16 || sdkp->max_ws_blocks > SD_MAX_WS10_BLOCKS)
744 		blocks = min_not_zero(sdkp->max_ws_blocks,
745 				      (u32)SD_MAX_WS16_BLOCKS);
746 	else
747 		blocks = min_not_zero(sdkp->max_ws_blocks,
748 				      (u32)SD_MAX_WS10_BLOCKS);
749 
750 out:
751 	blk_queue_max_write_same_sectors(q, blocks * (logical_block_size >> 9));
752 }
753 
754 /**
755  * sd_setup_write_same_cmnd - write the same data to multiple blocks
756  * @sdp: scsi device to operate one
757  * @rq: Request to prepare
758  *
759  * Will issue either WRITE SAME(10) or WRITE SAME(16) depending on
760  * preference indicated by target device.
761  **/
762 static int sd_setup_write_same_cmnd(struct scsi_device *sdp, struct request *rq)
763 {
764 	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
765 	struct bio *bio = rq->bio;
766 	sector_t sector = blk_rq_pos(rq);
767 	unsigned int nr_sectors = blk_rq_sectors(rq);
768 	unsigned int nr_bytes = blk_rq_bytes(rq);
769 	int ret;
770 
771 	if (sdkp->device->no_write_same)
772 		return BLKPREP_KILL;
773 
774 	BUG_ON(bio_offset(bio) || bio_iovec(bio)->bv_len != sdp->sector_size);
775 
776 	sector >>= ilog2(sdp->sector_size) - 9;
777 	nr_sectors >>= ilog2(sdp->sector_size) - 9;
778 
779 	rq->__data_len = sdp->sector_size;
780 	rq->timeout = SD_WRITE_SAME_TIMEOUT;
781 	memset(rq->cmd, 0, rq->cmd_len);
782 
783 	if (sdkp->ws16 || sector > 0xffffffff || nr_sectors > 0xffff) {
784 		rq->cmd_len = 16;
785 		rq->cmd[0] = WRITE_SAME_16;
786 		put_unaligned_be64(sector, &rq->cmd[2]);
787 		put_unaligned_be32(nr_sectors, &rq->cmd[10]);
788 	} else {
789 		rq->cmd_len = 10;
790 		rq->cmd[0] = WRITE_SAME;
791 		put_unaligned_be32(sector, &rq->cmd[2]);
792 		put_unaligned_be16(nr_sectors, &rq->cmd[7]);
793 	}
794 
795 	ret = scsi_setup_blk_pc_cmnd(sdp, rq);
796 	rq->__data_len = nr_bytes;
797 
798 	return ret;
799 }
800 
801 static int scsi_setup_flush_cmnd(struct scsi_device *sdp, struct request *rq)
802 {
803 	rq->timeout = SD_FLUSH_TIMEOUT;
804 	rq->retries = SD_MAX_RETRIES;
805 	rq->cmd[0] = SYNCHRONIZE_CACHE;
806 	rq->cmd_len = 10;
807 
808 	return scsi_setup_blk_pc_cmnd(sdp, rq);
809 }
810 
811 static void sd_unprep_fn(struct request_queue *q, struct request *rq)
812 {
813 	if (rq->cmd_flags & REQ_DISCARD) {
814 		free_page((unsigned long)rq->buffer);
815 		rq->buffer = NULL;
816 	}
817 }
818 
819 /**
820  *	sd_prep_fn - build a scsi (read or write) command from
821  *	information in the request structure.
822  *	@SCpnt: pointer to mid-level's per scsi command structure that
823  *	contains request and into which the scsi command is written
824  *
825  *	Returns 1 if successful and 0 if error (or cannot be done now).
826  **/
827 static int sd_prep_fn(struct request_queue *q, struct request *rq)
828 {
829 	struct scsi_cmnd *SCpnt;
830 	struct scsi_device *sdp = q->queuedata;
831 	struct gendisk *disk = rq->rq_disk;
832 	struct scsi_disk *sdkp;
833 	sector_t block = blk_rq_pos(rq);
834 	sector_t threshold;
835 	unsigned int this_count = blk_rq_sectors(rq);
836 	int ret, host_dif;
837 	unsigned char protect;
838 
839 	/*
840 	 * Discard request come in as REQ_TYPE_FS but we turn them into
841 	 * block PC requests to make life easier.
842 	 */
843 	if (rq->cmd_flags & REQ_DISCARD) {
844 		ret = sd_setup_discard_cmnd(sdp, rq);
845 		goto out;
846 	} else if (rq->cmd_flags & REQ_WRITE_SAME) {
847 		ret = sd_setup_write_same_cmnd(sdp, rq);
848 		goto out;
849 	} else if (rq->cmd_flags & REQ_FLUSH) {
850 		ret = scsi_setup_flush_cmnd(sdp, rq);
851 		goto out;
852 	} else if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
853 		ret = scsi_setup_blk_pc_cmnd(sdp, rq);
854 		goto out;
855 	} else if (rq->cmd_type != REQ_TYPE_FS) {
856 		ret = BLKPREP_KILL;
857 		goto out;
858 	}
859 	ret = scsi_setup_fs_cmnd(sdp, rq);
860 	if (ret != BLKPREP_OK)
861 		goto out;
862 	SCpnt = rq->special;
863 	sdkp = scsi_disk(disk);
864 
865 	/* from here on until we're complete, any goto out
866 	 * is used for a killable error condition */
867 	ret = BLKPREP_KILL;
868 
869 	SCSI_LOG_HLQUEUE(1, scmd_printk(KERN_INFO, SCpnt,
870 					"sd_prep_fn: block=%llu, "
871 					"count=%d\n",
872 					(unsigned long long)block,
873 					this_count));
874 
875 	if (!sdp || !scsi_device_online(sdp) ||
876 	    block + blk_rq_sectors(rq) > get_capacity(disk)) {
877 		SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
878 						"Finishing %u sectors\n",
879 						blk_rq_sectors(rq)));
880 		SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
881 						"Retry with 0x%p\n", SCpnt));
882 		goto out;
883 	}
884 
885 	if (sdp->changed) {
886 		/*
887 		 * quietly refuse to do anything to a changed disc until
888 		 * the changed bit has been reset
889 		 */
890 		/* printk("SCSI disk has been changed or is not present. Prohibiting further I/O.\n"); */
891 		goto out;
892 	}
893 
894 	/*
895 	 * Some SD card readers can't handle multi-sector accesses which touch
896 	 * the last one or two hardware sectors.  Split accesses as needed.
897 	 */
898 	threshold = get_capacity(disk) - SD_LAST_BUGGY_SECTORS *
899 		(sdp->sector_size / 512);
900 
901 	if (unlikely(sdp->last_sector_bug && block + this_count > threshold)) {
902 		if (block < threshold) {
903 			/* Access up to the threshold but not beyond */
904 			this_count = threshold - block;
905 		} else {
906 			/* Access only a single hardware sector */
907 			this_count = sdp->sector_size / 512;
908 		}
909 	}
910 
911 	SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, "block=%llu\n",
912 					(unsigned long long)block));
913 
914 	/*
915 	 * If we have a 1K hardware sectorsize, prevent access to single
916 	 * 512 byte sectors.  In theory we could handle this - in fact
917 	 * the scsi cdrom driver must be able to handle this because
918 	 * we typically use 1K blocksizes, and cdroms typically have
919 	 * 2K hardware sectorsizes.  Of course, things are simpler
920 	 * with the cdrom, since it is read-only.  For performance
921 	 * reasons, the filesystems should be able to handle this
922 	 * and not force the scsi disk driver to use bounce buffers
923 	 * for this.
924 	 */
925 	if (sdp->sector_size == 1024) {
926 		if ((block & 1) || (blk_rq_sectors(rq) & 1)) {
927 			scmd_printk(KERN_ERR, SCpnt,
928 				    "Bad block number requested\n");
929 			goto out;
930 		} else {
931 			block = block >> 1;
932 			this_count = this_count >> 1;
933 		}
934 	}
935 	if (sdp->sector_size == 2048) {
936 		if ((block & 3) || (blk_rq_sectors(rq) & 3)) {
937 			scmd_printk(KERN_ERR, SCpnt,
938 				    "Bad block number requested\n");
939 			goto out;
940 		} else {
941 			block = block >> 2;
942 			this_count = this_count >> 2;
943 		}
944 	}
945 	if (sdp->sector_size == 4096) {
946 		if ((block & 7) || (blk_rq_sectors(rq) & 7)) {
947 			scmd_printk(KERN_ERR, SCpnt,
948 				    "Bad block number requested\n");
949 			goto out;
950 		} else {
951 			block = block >> 3;
952 			this_count = this_count >> 3;
953 		}
954 	}
955 	if (rq_data_dir(rq) == WRITE) {
956 		if (!sdp->writeable) {
957 			goto out;
958 		}
959 		SCpnt->cmnd[0] = WRITE_6;
960 		SCpnt->sc_data_direction = DMA_TO_DEVICE;
961 
962 		if (blk_integrity_rq(rq))
963 			sd_dif_prepare(rq, block, sdp->sector_size);
964 
965 	} else if (rq_data_dir(rq) == READ) {
966 		SCpnt->cmnd[0] = READ_6;
967 		SCpnt->sc_data_direction = DMA_FROM_DEVICE;
968 	} else {
969 		scmd_printk(KERN_ERR, SCpnt, "Unknown command %x\n", rq->cmd_flags);
970 		goto out;
971 	}
972 
973 	SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
974 					"%s %d/%u 512 byte blocks.\n",
975 					(rq_data_dir(rq) == WRITE) ?
976 					"writing" : "reading", this_count,
977 					blk_rq_sectors(rq)));
978 
979 	/* Set RDPROTECT/WRPROTECT if disk is formatted with DIF */
980 	host_dif = scsi_host_dif_capable(sdp->host, sdkp->protection_type);
981 	if (host_dif)
982 		protect = 1 << 5;
983 	else
984 		protect = 0;
985 
986 	if (host_dif == SD_DIF_TYPE2_PROTECTION) {
987 		SCpnt->cmnd = mempool_alloc(sd_cdb_pool, GFP_ATOMIC);
988 
989 		if (unlikely(SCpnt->cmnd == NULL)) {
990 			ret = BLKPREP_DEFER;
991 			goto out;
992 		}
993 
994 		SCpnt->cmd_len = SD_EXT_CDB_SIZE;
995 		memset(SCpnt->cmnd, 0, SCpnt->cmd_len);
996 		SCpnt->cmnd[0] = VARIABLE_LENGTH_CMD;
997 		SCpnt->cmnd[7] = 0x18;
998 		SCpnt->cmnd[9] = (rq_data_dir(rq) == READ) ? READ_32 : WRITE_32;
999 		SCpnt->cmnd[10] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0);
1000 
1001 		/* LBA */
1002 		SCpnt->cmnd[12] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0;
1003 		SCpnt->cmnd[13] = sizeof(block) > 4 ? (unsigned char) (block >> 48) & 0xff : 0;
1004 		SCpnt->cmnd[14] = sizeof(block) > 4 ? (unsigned char) (block >> 40) & 0xff : 0;
1005 		SCpnt->cmnd[15] = sizeof(block) > 4 ? (unsigned char) (block >> 32) & 0xff : 0;
1006 		SCpnt->cmnd[16] = (unsigned char) (block >> 24) & 0xff;
1007 		SCpnt->cmnd[17] = (unsigned char) (block >> 16) & 0xff;
1008 		SCpnt->cmnd[18] = (unsigned char) (block >> 8) & 0xff;
1009 		SCpnt->cmnd[19] = (unsigned char) block & 0xff;
1010 
1011 		/* Expected Indirect LBA */
1012 		SCpnt->cmnd[20] = (unsigned char) (block >> 24) & 0xff;
1013 		SCpnt->cmnd[21] = (unsigned char) (block >> 16) & 0xff;
1014 		SCpnt->cmnd[22] = (unsigned char) (block >> 8) & 0xff;
1015 		SCpnt->cmnd[23] = (unsigned char) block & 0xff;
1016 
1017 		/* Transfer length */
1018 		SCpnt->cmnd[28] = (unsigned char) (this_count >> 24) & 0xff;
1019 		SCpnt->cmnd[29] = (unsigned char) (this_count >> 16) & 0xff;
1020 		SCpnt->cmnd[30] = (unsigned char) (this_count >> 8) & 0xff;
1021 		SCpnt->cmnd[31] = (unsigned char) this_count & 0xff;
1022 	} else if (sdp->use_16_for_rw) {
1023 		SCpnt->cmnd[0] += READ_16 - READ_6;
1024 		SCpnt->cmnd[1] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0);
1025 		SCpnt->cmnd[2] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0;
1026 		SCpnt->cmnd[3] = sizeof(block) > 4 ? (unsigned char) (block >> 48) & 0xff : 0;
1027 		SCpnt->cmnd[4] = sizeof(block) > 4 ? (unsigned char) (block >> 40) & 0xff : 0;
1028 		SCpnt->cmnd[5] = sizeof(block) > 4 ? (unsigned char) (block >> 32) & 0xff : 0;
1029 		SCpnt->cmnd[6] = (unsigned char) (block >> 24) & 0xff;
1030 		SCpnt->cmnd[7] = (unsigned char) (block >> 16) & 0xff;
1031 		SCpnt->cmnd[8] = (unsigned char) (block >> 8) & 0xff;
1032 		SCpnt->cmnd[9] = (unsigned char) block & 0xff;
1033 		SCpnt->cmnd[10] = (unsigned char) (this_count >> 24) & 0xff;
1034 		SCpnt->cmnd[11] = (unsigned char) (this_count >> 16) & 0xff;
1035 		SCpnt->cmnd[12] = (unsigned char) (this_count >> 8) & 0xff;
1036 		SCpnt->cmnd[13] = (unsigned char) this_count & 0xff;
1037 		SCpnt->cmnd[14] = SCpnt->cmnd[15] = 0;
1038 	} else if ((this_count > 0xff) || (block > 0x1fffff) ||
1039 		   scsi_device_protection(SCpnt->device) ||
1040 		   SCpnt->device->use_10_for_rw) {
1041 		if (this_count > 0xffff)
1042 			this_count = 0xffff;
1043 
1044 		SCpnt->cmnd[0] += READ_10 - READ_6;
1045 		SCpnt->cmnd[1] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0);
1046 		SCpnt->cmnd[2] = (unsigned char) (block >> 24) & 0xff;
1047 		SCpnt->cmnd[3] = (unsigned char) (block >> 16) & 0xff;
1048 		SCpnt->cmnd[4] = (unsigned char) (block >> 8) & 0xff;
1049 		SCpnt->cmnd[5] = (unsigned char) block & 0xff;
1050 		SCpnt->cmnd[6] = SCpnt->cmnd[9] = 0;
1051 		SCpnt->cmnd[7] = (unsigned char) (this_count >> 8) & 0xff;
1052 		SCpnt->cmnd[8] = (unsigned char) this_count & 0xff;
1053 	} else {
1054 		if (unlikely(rq->cmd_flags & REQ_FUA)) {
1055 			/*
1056 			 * This happens only if this drive failed
1057 			 * 10byte rw command with ILLEGAL_REQUEST
1058 			 * during operation and thus turned off
1059 			 * use_10_for_rw.
1060 			 */
1061 			scmd_printk(KERN_ERR, SCpnt,
1062 				    "FUA write on READ/WRITE(6) drive\n");
1063 			goto out;
1064 		}
1065 
1066 		SCpnt->cmnd[1] |= (unsigned char) ((block >> 16) & 0x1f);
1067 		SCpnt->cmnd[2] = (unsigned char) ((block >> 8) & 0xff);
1068 		SCpnt->cmnd[3] = (unsigned char) block & 0xff;
1069 		SCpnt->cmnd[4] = (unsigned char) this_count;
1070 		SCpnt->cmnd[5] = 0;
1071 	}
1072 	SCpnt->sdb.length = this_count * sdp->sector_size;
1073 
1074 	/* If DIF or DIX is enabled, tell HBA how to handle request */
1075 	if (host_dif || scsi_prot_sg_count(SCpnt))
1076 		sd_prot_op(SCpnt, host_dif);
1077 
1078 	/*
1079 	 * We shouldn't disconnect in the middle of a sector, so with a dumb
1080 	 * host adapter, it's safe to assume that we can at least transfer
1081 	 * this many bytes between each connect / disconnect.
1082 	 */
1083 	SCpnt->transfersize = sdp->sector_size;
1084 	SCpnt->underflow = this_count << 9;
1085 	SCpnt->allowed = SD_MAX_RETRIES;
1086 
1087 	/*
1088 	 * This indicates that the command is ready from our end to be
1089 	 * queued.
1090 	 */
1091 	ret = BLKPREP_OK;
1092  out:
1093 	return scsi_prep_return(q, rq, ret);
1094 }
1095 
1096 /**
1097  *	sd_open - open a scsi disk device
1098  *	@inode: only i_rdev member may be used
1099  *	@filp: only f_mode and f_flags may be used
1100  *
1101  *	Returns 0 if successful. Returns a negated errno value in case
1102  *	of error.
1103  *
1104  *	Note: This can be called from a user context (e.g. fsck(1) )
1105  *	or from within the kernel (e.g. as a result of a mount(1) ).
1106  *	In the latter case @inode and @filp carry an abridged amount
1107  *	of information as noted above.
1108  *
1109  *	Locking: called with bdev->bd_mutex held.
1110  **/
1111 static int sd_open(struct block_device *bdev, fmode_t mode)
1112 {
1113 	struct scsi_disk *sdkp = scsi_disk_get(bdev->bd_disk);
1114 	struct scsi_device *sdev;
1115 	int retval;
1116 
1117 	if (!sdkp)
1118 		return -ENXIO;
1119 
1120 	SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_open\n"));
1121 
1122 	sdev = sdkp->device;
1123 
1124 	retval = scsi_autopm_get_device(sdev);
1125 	if (retval)
1126 		goto error_autopm;
1127 
1128 	/*
1129 	 * If the device is in error recovery, wait until it is done.
1130 	 * If the device is offline, then disallow any access to it.
1131 	 */
1132 	retval = -ENXIO;
1133 	if (!scsi_block_when_processing_errors(sdev))
1134 		goto error_out;
1135 
1136 	if (sdev->removable || sdkp->write_prot)
1137 		check_disk_change(bdev);
1138 
1139 	/*
1140 	 * If the drive is empty, just let the open fail.
1141 	 */
1142 	retval = -ENOMEDIUM;
1143 	if (sdev->removable && !sdkp->media_present && !(mode & FMODE_NDELAY))
1144 		goto error_out;
1145 
1146 	/*
1147 	 * If the device has the write protect tab set, have the open fail
1148 	 * if the user expects to be able to write to the thing.
1149 	 */
1150 	retval = -EROFS;
1151 	if (sdkp->write_prot && (mode & FMODE_WRITE))
1152 		goto error_out;
1153 
1154 	/*
1155 	 * It is possible that the disk changing stuff resulted in
1156 	 * the device being taken offline.  If this is the case,
1157 	 * report this to the user, and don't pretend that the
1158 	 * open actually succeeded.
1159 	 */
1160 	retval = -ENXIO;
1161 	if (!scsi_device_online(sdev))
1162 		goto error_out;
1163 
1164 	if ((atomic_inc_return(&sdkp->openers) == 1) && sdev->removable) {
1165 		if (scsi_block_when_processing_errors(sdev))
1166 			scsi_set_medium_removal(sdev, SCSI_REMOVAL_PREVENT);
1167 	}
1168 
1169 	return 0;
1170 
1171 error_out:
1172 	scsi_autopm_put_device(sdev);
1173 error_autopm:
1174 	scsi_disk_put(sdkp);
1175 	return retval;
1176 }
1177 
1178 /**
1179  *	sd_release - invoked when the (last) close(2) is called on this
1180  *	scsi disk.
1181  *	@inode: only i_rdev member may be used
1182  *	@filp: only f_mode and f_flags may be used
1183  *
1184  *	Returns 0.
1185  *
1186  *	Note: may block (uninterruptible) if error recovery is underway
1187  *	on this disk.
1188  *
1189  *	Locking: called with bdev->bd_mutex held.
1190  **/
1191 static int sd_release(struct gendisk *disk, fmode_t mode)
1192 {
1193 	struct scsi_disk *sdkp = scsi_disk(disk);
1194 	struct scsi_device *sdev = sdkp->device;
1195 
1196 	SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_release\n"));
1197 
1198 	if (atomic_dec_return(&sdkp->openers) == 0 && sdev->removable) {
1199 		if (scsi_block_when_processing_errors(sdev))
1200 			scsi_set_medium_removal(sdev, SCSI_REMOVAL_ALLOW);
1201 	}
1202 
1203 	/*
1204 	 * XXX and what if there are packets in flight and this close()
1205 	 * XXX is followed by a "rmmod sd_mod"?
1206 	 */
1207 
1208 	scsi_autopm_put_device(sdev);
1209 	scsi_disk_put(sdkp);
1210 	return 0;
1211 }
1212 
1213 static int sd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
1214 {
1215 	struct scsi_disk *sdkp = scsi_disk(bdev->bd_disk);
1216 	struct scsi_device *sdp = sdkp->device;
1217 	struct Scsi_Host *host = sdp->host;
1218 	int diskinfo[4];
1219 
1220 	/* default to most commonly used values */
1221         diskinfo[0] = 0x40;	/* 1 << 6 */
1222        	diskinfo[1] = 0x20;	/* 1 << 5 */
1223        	diskinfo[2] = sdkp->capacity >> 11;
1224 
1225 	/* override with calculated, extended default, or driver values */
1226 	if (host->hostt->bios_param)
1227 		host->hostt->bios_param(sdp, bdev, sdkp->capacity, diskinfo);
1228 	else
1229 		scsicam_bios_param(bdev, sdkp->capacity, diskinfo);
1230 
1231 	geo->heads = diskinfo[0];
1232 	geo->sectors = diskinfo[1];
1233 	geo->cylinders = diskinfo[2];
1234 	return 0;
1235 }
1236 
1237 /**
1238  *	sd_ioctl - process an ioctl
1239  *	@inode: only i_rdev/i_bdev members may be used
1240  *	@filp: only f_mode and f_flags may be used
1241  *	@cmd: ioctl command number
1242  *	@arg: this is third argument given to ioctl(2) system call.
1243  *	Often contains a pointer.
1244  *
1245  *	Returns 0 if successful (some ioctls return positive numbers on
1246  *	success as well). Returns a negated errno value in case of error.
1247  *
1248  *	Note: most ioctls are forward onto the block subsystem or further
1249  *	down in the scsi subsystem.
1250  **/
1251 static int sd_ioctl(struct block_device *bdev, fmode_t mode,
1252 		    unsigned int cmd, unsigned long arg)
1253 {
1254 	struct gendisk *disk = bdev->bd_disk;
1255 	struct scsi_disk *sdkp = scsi_disk(disk);
1256 	struct scsi_device *sdp = sdkp->device;
1257 	void __user *p = (void __user *)arg;
1258 	int error;
1259 
1260 	SCSI_LOG_IOCTL(1, sd_printk(KERN_INFO, sdkp, "sd_ioctl: disk=%s, "
1261 				    "cmd=0x%x\n", disk->disk_name, cmd));
1262 
1263 	error = scsi_verify_blk_ioctl(bdev, cmd);
1264 	if (error < 0)
1265 		return error;
1266 
1267 	/*
1268 	 * If we are in the middle of error recovery, don't let anyone
1269 	 * else try and use this device.  Also, if error recovery fails, it
1270 	 * may try and take the device offline, in which case all further
1271 	 * access to the device is prohibited.
1272 	 */
1273 	error = scsi_nonblockable_ioctl(sdp, cmd, p,
1274 					(mode & FMODE_NDELAY) != 0);
1275 	if (!scsi_block_when_processing_errors(sdp) || !error)
1276 		goto out;
1277 
1278 	/*
1279 	 * Send SCSI addressing ioctls directly to mid level, send other
1280 	 * ioctls to block level and then onto mid level if they can't be
1281 	 * resolved.
1282 	 */
1283 	switch (cmd) {
1284 		case SCSI_IOCTL_GET_IDLUN:
1285 		case SCSI_IOCTL_GET_BUS_NUMBER:
1286 			error = scsi_ioctl(sdp, cmd, p);
1287 			break;
1288 		default:
1289 			error = scsi_cmd_blk_ioctl(bdev, mode, cmd, p);
1290 			if (error != -ENOTTY)
1291 				break;
1292 			error = scsi_ioctl(sdp, cmd, p);
1293 			break;
1294 	}
1295 out:
1296 	return error;
1297 }
1298 
1299 static void set_media_not_present(struct scsi_disk *sdkp)
1300 {
1301 	if (sdkp->media_present)
1302 		sdkp->device->changed = 1;
1303 
1304 	if (sdkp->device->removable) {
1305 		sdkp->media_present = 0;
1306 		sdkp->capacity = 0;
1307 	}
1308 }
1309 
1310 static int media_not_present(struct scsi_disk *sdkp,
1311 			     struct scsi_sense_hdr *sshdr)
1312 {
1313 	if (!scsi_sense_valid(sshdr))
1314 		return 0;
1315 
1316 	/* not invoked for commands that could return deferred errors */
1317 	switch (sshdr->sense_key) {
1318 	case UNIT_ATTENTION:
1319 	case NOT_READY:
1320 		/* medium not present */
1321 		if (sshdr->asc == 0x3A) {
1322 			set_media_not_present(sdkp);
1323 			return 1;
1324 		}
1325 	}
1326 	return 0;
1327 }
1328 
1329 /**
1330  *	sd_check_events - check media events
1331  *	@disk: kernel device descriptor
1332  *	@clearing: disk events currently being cleared
1333  *
1334  *	Returns mask of DISK_EVENT_*.
1335  *
1336  *	Note: this function is invoked from the block subsystem.
1337  **/
1338 static unsigned int sd_check_events(struct gendisk *disk, unsigned int clearing)
1339 {
1340 	struct scsi_disk *sdkp = scsi_disk(disk);
1341 	struct scsi_device *sdp = sdkp->device;
1342 	struct scsi_sense_hdr *sshdr = NULL;
1343 	int retval;
1344 
1345 	SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_check_events\n"));
1346 
1347 	/*
1348 	 * If the device is offline, don't send any commands - just pretend as
1349 	 * if the command failed.  If the device ever comes back online, we
1350 	 * can deal with it then.  It is only because of unrecoverable errors
1351 	 * that we would ever take a device offline in the first place.
1352 	 */
1353 	if (!scsi_device_online(sdp)) {
1354 		set_media_not_present(sdkp);
1355 		goto out;
1356 	}
1357 
1358 	/*
1359 	 * Using TEST_UNIT_READY enables differentiation between drive with
1360 	 * no cartridge loaded - NOT READY, drive with changed cartridge -
1361 	 * UNIT ATTENTION, or with same cartridge - GOOD STATUS.
1362 	 *
1363 	 * Drives that auto spin down. eg iomega jaz 1G, will be started
1364 	 * by sd_spinup_disk() from sd_revalidate_disk(), which happens whenever
1365 	 * sd_revalidate() is called.
1366 	 */
1367 	retval = -ENODEV;
1368 
1369 	if (scsi_block_when_processing_errors(sdp)) {
1370 		retval = scsi_autopm_get_device(sdp);
1371 		if (retval)
1372 			goto out;
1373 
1374 		sshdr  = kzalloc(sizeof(*sshdr), GFP_KERNEL);
1375 		retval = scsi_test_unit_ready(sdp, SD_TIMEOUT, SD_MAX_RETRIES,
1376 					      sshdr);
1377 		scsi_autopm_put_device(sdp);
1378 	}
1379 
1380 	/* failed to execute TUR, assume media not present */
1381 	if (host_byte(retval)) {
1382 		set_media_not_present(sdkp);
1383 		goto out;
1384 	}
1385 
1386 	if (media_not_present(sdkp, sshdr))
1387 		goto out;
1388 
1389 	/*
1390 	 * For removable scsi disk we have to recognise the presence
1391 	 * of a disk in the drive.
1392 	 */
1393 	if (!sdkp->media_present)
1394 		sdp->changed = 1;
1395 	sdkp->media_present = 1;
1396 out:
1397 	/*
1398 	 * sdp->changed is set under the following conditions:
1399 	 *
1400 	 *	Medium present state has changed in either direction.
1401 	 *	Device has indicated UNIT_ATTENTION.
1402 	 */
1403 	kfree(sshdr);
1404 	retval = sdp->changed ? DISK_EVENT_MEDIA_CHANGE : 0;
1405 	sdp->changed = 0;
1406 	return retval;
1407 }
1408 
1409 static int sd_sync_cache(struct scsi_disk *sdkp)
1410 {
1411 	int retries, res;
1412 	struct scsi_device *sdp = sdkp->device;
1413 	struct scsi_sense_hdr sshdr;
1414 
1415 	if (!scsi_device_online(sdp))
1416 		return -ENODEV;
1417 
1418 
1419 	for (retries = 3; retries > 0; --retries) {
1420 		unsigned char cmd[10] = { 0 };
1421 
1422 		cmd[0] = SYNCHRONIZE_CACHE;
1423 		/*
1424 		 * Leave the rest of the command zero to indicate
1425 		 * flush everything.
1426 		 */
1427 		res = scsi_execute_req(sdp, cmd, DMA_NONE, NULL, 0, &sshdr,
1428 				       SD_FLUSH_TIMEOUT, SD_MAX_RETRIES, NULL);
1429 		if (res == 0)
1430 			break;
1431 	}
1432 
1433 	if (res) {
1434 		sd_print_result(sdkp, res);
1435 		if (driver_byte(res) & DRIVER_SENSE)
1436 			sd_print_sense_hdr(sdkp, &sshdr);
1437 	}
1438 
1439 	if (res)
1440 		return -EIO;
1441 	return 0;
1442 }
1443 
1444 static void sd_rescan(struct device *dev)
1445 {
1446 	struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
1447 
1448 	if (sdkp) {
1449 		revalidate_disk(sdkp->disk);
1450 		scsi_disk_put(sdkp);
1451 	}
1452 }
1453 
1454 
1455 #ifdef CONFIG_COMPAT
1456 /*
1457  * This gets directly called from VFS. When the ioctl
1458  * is not recognized we go back to the other translation paths.
1459  */
1460 static int sd_compat_ioctl(struct block_device *bdev, fmode_t mode,
1461 			   unsigned int cmd, unsigned long arg)
1462 {
1463 	struct scsi_device *sdev = scsi_disk(bdev->bd_disk)->device;
1464 	int ret;
1465 
1466 	ret = scsi_verify_blk_ioctl(bdev, cmd);
1467 	if (ret < 0)
1468 		return ret;
1469 
1470 	/*
1471 	 * If we are in the middle of error recovery, don't let anyone
1472 	 * else try and use this device.  Also, if error recovery fails, it
1473 	 * may try and take the device offline, in which case all further
1474 	 * access to the device is prohibited.
1475 	 */
1476 	if (!scsi_block_when_processing_errors(sdev))
1477 		return -ENODEV;
1478 
1479 	if (sdev->host->hostt->compat_ioctl) {
1480 		ret = sdev->host->hostt->compat_ioctl(sdev, cmd, (void __user *)arg);
1481 
1482 		return ret;
1483 	}
1484 
1485 	/*
1486 	 * Let the static ioctl translation table take care of it.
1487 	 */
1488 	return -ENOIOCTLCMD;
1489 }
1490 #endif
1491 
1492 static const struct block_device_operations sd_fops = {
1493 	.owner			= THIS_MODULE,
1494 	.open			= sd_open,
1495 	.release		= sd_release,
1496 	.ioctl			= sd_ioctl,
1497 	.getgeo			= sd_getgeo,
1498 #ifdef CONFIG_COMPAT
1499 	.compat_ioctl		= sd_compat_ioctl,
1500 #endif
1501 	.check_events		= sd_check_events,
1502 	.revalidate_disk	= sd_revalidate_disk,
1503 	.unlock_native_capacity	= sd_unlock_native_capacity,
1504 };
1505 
1506 /**
1507  *	sd_eh_action - error handling callback
1508  *	@scmd:		sd-issued command that has failed
1509  *	@eh_cmnd:	The command that was sent during error handling
1510  *	@eh_cmnd_len:	Length of eh_cmnd in bytes
1511  *	@eh_disp:	The recovery disposition suggested by the midlayer
1512  *
1513  *	This function is called by the SCSI midlayer upon completion of
1514  *	an error handling command (TEST UNIT READY, START STOP UNIT,
1515  *	etc.) The command sent to the device by the error handler is
1516  *	stored in eh_cmnd. The result of sending the eh command is
1517  *	passed in eh_disp.
1518  **/
1519 static int sd_eh_action(struct scsi_cmnd *scmd, unsigned char *eh_cmnd,
1520 			int eh_cmnd_len, int eh_disp)
1521 {
1522 	struct scsi_disk *sdkp = scsi_disk(scmd->request->rq_disk);
1523 
1524 	if (!scsi_device_online(scmd->device) ||
1525 	    !scsi_medium_access_command(scmd))
1526 		return eh_disp;
1527 
1528 	/*
1529 	 * The device has timed out executing a medium access command.
1530 	 * However, the TEST UNIT READY command sent during error
1531 	 * handling completed successfully. Either the device is in the
1532 	 * process of recovering or has it suffered an internal failure
1533 	 * that prevents access to the storage medium.
1534 	 */
1535 	if (host_byte(scmd->result) == DID_TIME_OUT && eh_disp == SUCCESS &&
1536 	    eh_cmnd_len && eh_cmnd[0] == TEST_UNIT_READY)
1537 		sdkp->medium_access_timed_out++;
1538 
1539 	/*
1540 	 * If the device keeps failing read/write commands but TEST UNIT
1541 	 * READY always completes successfully we assume that medium
1542 	 * access is no longer possible and take the device offline.
1543 	 */
1544 	if (sdkp->medium_access_timed_out >= sdkp->max_medium_access_timeouts) {
1545 		scmd_printk(KERN_ERR, scmd,
1546 			    "Medium access timeout failure. Offlining disk!\n");
1547 		scsi_device_set_state(scmd->device, SDEV_OFFLINE);
1548 
1549 		return FAILED;
1550 	}
1551 
1552 	return eh_disp;
1553 }
1554 
1555 static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd)
1556 {
1557 	u64 start_lba = blk_rq_pos(scmd->request);
1558 	u64 end_lba = blk_rq_pos(scmd->request) + (scsi_bufflen(scmd) / 512);
1559 	u64 bad_lba;
1560 	int info_valid;
1561 	/*
1562 	 * resid is optional but mostly filled in.  When it's unused,
1563 	 * its value is zero, so we assume the whole buffer transferred
1564 	 */
1565 	unsigned int transferred = scsi_bufflen(scmd) - scsi_get_resid(scmd);
1566 	unsigned int good_bytes;
1567 
1568 	if (scmd->request->cmd_type != REQ_TYPE_FS)
1569 		return 0;
1570 
1571 	info_valid = scsi_get_sense_info_fld(scmd->sense_buffer,
1572 					     SCSI_SENSE_BUFFERSIZE,
1573 					     &bad_lba);
1574 	if (!info_valid)
1575 		return 0;
1576 
1577 	if (scsi_bufflen(scmd) <= scmd->device->sector_size)
1578 		return 0;
1579 
1580 	if (scmd->device->sector_size < 512) {
1581 		/* only legitimate sector_size here is 256 */
1582 		start_lba <<= 1;
1583 		end_lba <<= 1;
1584 	} else {
1585 		/* be careful ... don't want any overflows */
1586 		u64 factor = scmd->device->sector_size / 512;
1587 		do_div(start_lba, factor);
1588 		do_div(end_lba, factor);
1589 	}
1590 
1591 	/* The bad lba was reported incorrectly, we have no idea where
1592 	 * the error is.
1593 	 */
1594 	if (bad_lba < start_lba  || bad_lba >= end_lba)
1595 		return 0;
1596 
1597 	/* This computation should always be done in terms of
1598 	 * the resolution of the device's medium.
1599 	 */
1600 	good_bytes = (bad_lba - start_lba) * scmd->device->sector_size;
1601 	return min(good_bytes, transferred);
1602 }
1603 
1604 /**
1605  *	sd_done - bottom half handler: called when the lower level
1606  *	driver has completed (successfully or otherwise) a scsi command.
1607  *	@SCpnt: mid-level's per command structure.
1608  *
1609  *	Note: potentially run from within an ISR. Must not block.
1610  **/
1611 static int sd_done(struct scsi_cmnd *SCpnt)
1612 {
1613 	int result = SCpnt->result;
1614 	unsigned int good_bytes = result ? 0 : scsi_bufflen(SCpnt);
1615 	struct scsi_sense_hdr sshdr;
1616 	struct scsi_disk *sdkp = scsi_disk(SCpnt->request->rq_disk);
1617 	struct request *req = SCpnt->request;
1618 	int sense_valid = 0;
1619 	int sense_deferred = 0;
1620 	unsigned char op = SCpnt->cmnd[0];
1621 	unsigned char unmap = SCpnt->cmnd[1] & 8;
1622 
1623 	if (req->cmd_flags & REQ_DISCARD || req->cmd_flags & REQ_WRITE_SAME) {
1624 		if (!result) {
1625 			good_bytes = blk_rq_bytes(req);
1626 			scsi_set_resid(SCpnt, 0);
1627 		} else {
1628 			good_bytes = 0;
1629 			scsi_set_resid(SCpnt, blk_rq_bytes(req));
1630 		}
1631 	}
1632 
1633 	if (result) {
1634 		sense_valid = scsi_command_normalize_sense(SCpnt, &sshdr);
1635 		if (sense_valid)
1636 			sense_deferred = scsi_sense_is_deferred(&sshdr);
1637 	}
1638 #ifdef CONFIG_SCSI_LOGGING
1639 	SCSI_LOG_HLCOMPLETE(1, scsi_print_result(SCpnt));
1640 	if (sense_valid) {
1641 		SCSI_LOG_HLCOMPLETE(1, scmd_printk(KERN_INFO, SCpnt,
1642 						   "sd_done: sb[respc,sk,asc,"
1643 						   "ascq]=%x,%x,%x,%x\n",
1644 						   sshdr.response_code,
1645 						   sshdr.sense_key, sshdr.asc,
1646 						   sshdr.ascq));
1647 	}
1648 #endif
1649 	if (driver_byte(result) != DRIVER_SENSE &&
1650 	    (!sense_valid || sense_deferred))
1651 		goto out;
1652 
1653 	sdkp->medium_access_timed_out = 0;
1654 
1655 	switch (sshdr.sense_key) {
1656 	case HARDWARE_ERROR:
1657 	case MEDIUM_ERROR:
1658 		good_bytes = sd_completed_bytes(SCpnt);
1659 		break;
1660 	case RECOVERED_ERROR:
1661 		good_bytes = scsi_bufflen(SCpnt);
1662 		break;
1663 	case NO_SENSE:
1664 		/* This indicates a false check condition, so ignore it.  An
1665 		 * unknown amount of data was transferred so treat it as an
1666 		 * error.
1667 		 */
1668 		scsi_print_sense("sd", SCpnt);
1669 		SCpnt->result = 0;
1670 		memset(SCpnt->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
1671 		break;
1672 	case ABORTED_COMMAND:
1673 		if (sshdr.asc == 0x10)  /* DIF: Target detected corruption */
1674 			good_bytes = sd_completed_bytes(SCpnt);
1675 		break;
1676 	case ILLEGAL_REQUEST:
1677 		if (sshdr.asc == 0x10)  /* DIX: Host detected corruption */
1678 			good_bytes = sd_completed_bytes(SCpnt);
1679 		/* INVALID COMMAND OPCODE or INVALID FIELD IN CDB */
1680 		if (sshdr.asc == 0x20 || sshdr.asc == 0x24) {
1681 			switch (op) {
1682 			case UNMAP:
1683 				sd_config_discard(sdkp, SD_LBP_DISABLE);
1684 				break;
1685 			case WRITE_SAME_16:
1686 			case WRITE_SAME:
1687 				if (unmap)
1688 					sd_config_discard(sdkp, SD_LBP_DISABLE);
1689 				else {
1690 					sdkp->device->no_write_same = 1;
1691 					sd_config_write_same(sdkp);
1692 
1693 					good_bytes = 0;
1694 					req->__data_len = blk_rq_bytes(req);
1695 					req->cmd_flags |= REQ_QUIET;
1696 				}
1697 			}
1698 		}
1699 		break;
1700 	default:
1701 		break;
1702 	}
1703  out:
1704 	if (rq_data_dir(SCpnt->request) == READ && scsi_prot_sg_count(SCpnt))
1705 		sd_dif_complete(SCpnt, good_bytes);
1706 
1707 	if (scsi_host_dif_capable(sdkp->device->host, sdkp->protection_type)
1708 	    == SD_DIF_TYPE2_PROTECTION && SCpnt->cmnd != SCpnt->request->cmd) {
1709 
1710 		/* We have to print a failed command here as the
1711 		 * extended CDB gets freed before scsi_io_completion()
1712 		 * is called.
1713 		 */
1714 		if (result)
1715 			scsi_print_command(SCpnt);
1716 
1717 		mempool_free(SCpnt->cmnd, sd_cdb_pool);
1718 		SCpnt->cmnd = NULL;
1719 		SCpnt->cmd_len = 0;
1720 	}
1721 
1722 	return good_bytes;
1723 }
1724 
1725 /*
1726  * spinup disk - called only in sd_revalidate_disk()
1727  */
1728 static void
1729 sd_spinup_disk(struct scsi_disk *sdkp)
1730 {
1731 	unsigned char cmd[10];
1732 	unsigned long spintime_expire = 0;
1733 	int retries, spintime;
1734 	unsigned int the_result;
1735 	struct scsi_sense_hdr sshdr;
1736 	int sense_valid = 0;
1737 
1738 	spintime = 0;
1739 
1740 	/* Spin up drives, as required.  Only do this at boot time */
1741 	/* Spinup needs to be done for module loads too. */
1742 	do {
1743 		retries = 0;
1744 
1745 		do {
1746 			cmd[0] = TEST_UNIT_READY;
1747 			memset((void *) &cmd[1], 0, 9);
1748 
1749 			the_result = scsi_execute_req(sdkp->device, cmd,
1750 						      DMA_NONE, NULL, 0,
1751 						      &sshdr, SD_TIMEOUT,
1752 						      SD_MAX_RETRIES, NULL);
1753 
1754 			/*
1755 			 * If the drive has indicated to us that it
1756 			 * doesn't have any media in it, don't bother
1757 			 * with any more polling.
1758 			 */
1759 			if (media_not_present(sdkp, &sshdr))
1760 				return;
1761 
1762 			if (the_result)
1763 				sense_valid = scsi_sense_valid(&sshdr);
1764 			retries++;
1765 		} while (retries < 3 &&
1766 			 (!scsi_status_is_good(the_result) ||
1767 			  ((driver_byte(the_result) & DRIVER_SENSE) &&
1768 			  sense_valid && sshdr.sense_key == UNIT_ATTENTION)));
1769 
1770 		if ((driver_byte(the_result) & DRIVER_SENSE) == 0) {
1771 			/* no sense, TUR either succeeded or failed
1772 			 * with a status error */
1773 			if(!spintime && !scsi_status_is_good(the_result)) {
1774 				sd_printk(KERN_NOTICE, sdkp, "Unit Not Ready\n");
1775 				sd_print_result(sdkp, the_result);
1776 			}
1777 			break;
1778 		}
1779 
1780 		/*
1781 		 * The device does not want the automatic start to be issued.
1782 		 */
1783 		if (sdkp->device->no_start_on_add)
1784 			break;
1785 
1786 		if (sense_valid && sshdr.sense_key == NOT_READY) {
1787 			if (sshdr.asc == 4 && sshdr.ascq == 3)
1788 				break;	/* manual intervention required */
1789 			if (sshdr.asc == 4 && sshdr.ascq == 0xb)
1790 				break;	/* standby */
1791 			if (sshdr.asc == 4 && sshdr.ascq == 0xc)
1792 				break;	/* unavailable */
1793 			/*
1794 			 * Issue command to spin up drive when not ready
1795 			 */
1796 			if (!spintime) {
1797 				sd_printk(KERN_NOTICE, sdkp, "Spinning up disk...");
1798 				cmd[0] = START_STOP;
1799 				cmd[1] = 1;	/* Return immediately */
1800 				memset((void *) &cmd[2], 0, 8);
1801 				cmd[4] = 1;	/* Start spin cycle */
1802 				if (sdkp->device->start_stop_pwr_cond)
1803 					cmd[4] |= 1 << 4;
1804 				scsi_execute_req(sdkp->device, cmd, DMA_NONE,
1805 						 NULL, 0, &sshdr,
1806 						 SD_TIMEOUT, SD_MAX_RETRIES,
1807 						 NULL);
1808 				spintime_expire = jiffies + 100 * HZ;
1809 				spintime = 1;
1810 			}
1811 			/* Wait 1 second for next try */
1812 			msleep(1000);
1813 			printk(".");
1814 
1815 		/*
1816 		 * Wait for USB flash devices with slow firmware.
1817 		 * Yes, this sense key/ASC combination shouldn't
1818 		 * occur here.  It's characteristic of these devices.
1819 		 */
1820 		} else if (sense_valid &&
1821 				sshdr.sense_key == UNIT_ATTENTION &&
1822 				sshdr.asc == 0x28) {
1823 			if (!spintime) {
1824 				spintime_expire = jiffies + 5 * HZ;
1825 				spintime = 1;
1826 			}
1827 			/* Wait 1 second for next try */
1828 			msleep(1000);
1829 		} else {
1830 			/* we don't understand the sense code, so it's
1831 			 * probably pointless to loop */
1832 			if(!spintime) {
1833 				sd_printk(KERN_NOTICE, sdkp, "Unit Not Ready\n");
1834 				sd_print_sense_hdr(sdkp, &sshdr);
1835 			}
1836 			break;
1837 		}
1838 
1839 	} while (spintime && time_before_eq(jiffies, spintime_expire));
1840 
1841 	if (spintime) {
1842 		if (scsi_status_is_good(the_result))
1843 			printk("ready\n");
1844 		else
1845 			printk("not responding...\n");
1846 	}
1847 }
1848 
1849 
1850 /*
1851  * Determine whether disk supports Data Integrity Field.
1852  */
1853 static int sd_read_protection_type(struct scsi_disk *sdkp, unsigned char *buffer)
1854 {
1855 	struct scsi_device *sdp = sdkp->device;
1856 	u8 type;
1857 	int ret = 0;
1858 
1859 	if (scsi_device_protection(sdp) == 0 || (buffer[12] & 1) == 0)
1860 		return ret;
1861 
1862 	type = ((buffer[12] >> 1) & 7) + 1; /* P_TYPE 0 = Type 1 */
1863 
1864 	if (type > SD_DIF_TYPE3_PROTECTION)
1865 		ret = -ENODEV;
1866 	else if (scsi_host_dif_capable(sdp->host, type))
1867 		ret = 1;
1868 
1869 	if (sdkp->first_scan || type != sdkp->protection_type)
1870 		switch (ret) {
1871 		case -ENODEV:
1872 			sd_printk(KERN_ERR, sdkp, "formatted with unsupported" \
1873 				  " protection type %u. Disabling disk!\n",
1874 				  type);
1875 			break;
1876 		case 1:
1877 			sd_printk(KERN_NOTICE, sdkp,
1878 				  "Enabling DIF Type %u protection\n", type);
1879 			break;
1880 		case 0:
1881 			sd_printk(KERN_NOTICE, sdkp,
1882 				  "Disabling DIF Type %u protection\n", type);
1883 			break;
1884 		}
1885 
1886 	sdkp->protection_type = type;
1887 
1888 	return ret;
1889 }
1890 
1891 static void read_capacity_error(struct scsi_disk *sdkp, struct scsi_device *sdp,
1892 			struct scsi_sense_hdr *sshdr, int sense_valid,
1893 			int the_result)
1894 {
1895 	sd_print_result(sdkp, the_result);
1896 	if (driver_byte(the_result) & DRIVER_SENSE)
1897 		sd_print_sense_hdr(sdkp, sshdr);
1898 	else
1899 		sd_printk(KERN_NOTICE, sdkp, "Sense not available.\n");
1900 
1901 	/*
1902 	 * Set dirty bit for removable devices if not ready -
1903 	 * sometimes drives will not report this properly.
1904 	 */
1905 	if (sdp->removable &&
1906 	    sense_valid && sshdr->sense_key == NOT_READY)
1907 		set_media_not_present(sdkp);
1908 
1909 	/*
1910 	 * We used to set media_present to 0 here to indicate no media
1911 	 * in the drive, but some drives fail read capacity even with
1912 	 * media present, so we can't do that.
1913 	 */
1914 	sdkp->capacity = 0; /* unknown mapped to zero - as usual */
1915 }
1916 
1917 #define RC16_LEN 32
1918 #if RC16_LEN > SD_BUF_SIZE
1919 #error RC16_LEN must not be more than SD_BUF_SIZE
1920 #endif
1921 
1922 #define READ_CAPACITY_RETRIES_ON_RESET	10
1923 
1924 static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp,
1925 						unsigned char *buffer)
1926 {
1927 	unsigned char cmd[16];
1928 	struct scsi_sense_hdr sshdr;
1929 	int sense_valid = 0;
1930 	int the_result;
1931 	int retries = 3, reset_retries = READ_CAPACITY_RETRIES_ON_RESET;
1932 	unsigned int alignment;
1933 	unsigned long long lba;
1934 	unsigned sector_size;
1935 
1936 	if (sdp->no_read_capacity_16)
1937 		return -EINVAL;
1938 
1939 	do {
1940 		memset(cmd, 0, 16);
1941 		cmd[0] = SERVICE_ACTION_IN;
1942 		cmd[1] = SAI_READ_CAPACITY_16;
1943 		cmd[13] = RC16_LEN;
1944 		memset(buffer, 0, RC16_LEN);
1945 
1946 		the_result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE,
1947 					buffer, RC16_LEN, &sshdr,
1948 					SD_TIMEOUT, SD_MAX_RETRIES, NULL);
1949 
1950 		if (media_not_present(sdkp, &sshdr))
1951 			return -ENODEV;
1952 
1953 		if (the_result) {
1954 			sense_valid = scsi_sense_valid(&sshdr);
1955 			if (sense_valid &&
1956 			    sshdr.sense_key == ILLEGAL_REQUEST &&
1957 			    (sshdr.asc == 0x20 || sshdr.asc == 0x24) &&
1958 			    sshdr.ascq == 0x00)
1959 				/* Invalid Command Operation Code or
1960 				 * Invalid Field in CDB, just retry
1961 				 * silently with RC10 */
1962 				return -EINVAL;
1963 			if (sense_valid &&
1964 			    sshdr.sense_key == UNIT_ATTENTION &&
1965 			    sshdr.asc == 0x29 && sshdr.ascq == 0x00)
1966 				/* Device reset might occur several times,
1967 				 * give it one more chance */
1968 				if (--reset_retries > 0)
1969 					continue;
1970 		}
1971 		retries--;
1972 
1973 	} while (the_result && retries);
1974 
1975 	if (the_result) {
1976 		sd_printk(KERN_NOTICE, sdkp, "READ CAPACITY(16) failed\n");
1977 		read_capacity_error(sdkp, sdp, &sshdr, sense_valid, the_result);
1978 		return -EINVAL;
1979 	}
1980 
1981 	sector_size = get_unaligned_be32(&buffer[8]);
1982 	lba = get_unaligned_be64(&buffer[0]);
1983 
1984 	if (sd_read_protection_type(sdkp, buffer) < 0) {
1985 		sdkp->capacity = 0;
1986 		return -ENODEV;
1987 	}
1988 
1989 	if ((sizeof(sdkp->capacity) == 4) && (lba >= 0xffffffffULL)) {
1990 		sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a "
1991 			"kernel compiled with support for large block "
1992 			"devices.\n");
1993 		sdkp->capacity = 0;
1994 		return -EOVERFLOW;
1995 	}
1996 
1997 	/* Logical blocks per physical block exponent */
1998 	sdkp->physical_block_size = (1 << (buffer[13] & 0xf)) * sector_size;
1999 
2000 	/* Lowest aligned logical block */
2001 	alignment = ((buffer[14] & 0x3f) << 8 | buffer[15]) * sector_size;
2002 	blk_queue_alignment_offset(sdp->request_queue, alignment);
2003 	if (alignment && sdkp->first_scan)
2004 		sd_printk(KERN_NOTICE, sdkp,
2005 			  "physical block alignment offset: %u\n", alignment);
2006 
2007 	if (buffer[14] & 0x80) { /* LBPME */
2008 		sdkp->lbpme = 1;
2009 
2010 		if (buffer[14] & 0x40) /* LBPRZ */
2011 			sdkp->lbprz = 1;
2012 
2013 		sd_config_discard(sdkp, SD_LBP_WS16);
2014 	}
2015 
2016 	sdkp->capacity = lba + 1;
2017 	return sector_size;
2018 }
2019 
2020 static int read_capacity_10(struct scsi_disk *sdkp, struct scsi_device *sdp,
2021 						unsigned char *buffer)
2022 {
2023 	unsigned char cmd[16];
2024 	struct scsi_sense_hdr sshdr;
2025 	int sense_valid = 0;
2026 	int the_result;
2027 	int retries = 3, reset_retries = READ_CAPACITY_RETRIES_ON_RESET;
2028 	sector_t lba;
2029 	unsigned sector_size;
2030 
2031 	do {
2032 		cmd[0] = READ_CAPACITY;
2033 		memset(&cmd[1], 0, 9);
2034 		memset(buffer, 0, 8);
2035 
2036 		the_result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE,
2037 					buffer, 8, &sshdr,
2038 					SD_TIMEOUT, SD_MAX_RETRIES, NULL);
2039 
2040 		if (media_not_present(sdkp, &sshdr))
2041 			return -ENODEV;
2042 
2043 		if (the_result) {
2044 			sense_valid = scsi_sense_valid(&sshdr);
2045 			if (sense_valid &&
2046 			    sshdr.sense_key == UNIT_ATTENTION &&
2047 			    sshdr.asc == 0x29 && sshdr.ascq == 0x00)
2048 				/* Device reset might occur several times,
2049 				 * give it one more chance */
2050 				if (--reset_retries > 0)
2051 					continue;
2052 		}
2053 		retries--;
2054 
2055 	} while (the_result && retries);
2056 
2057 	if (the_result) {
2058 		sd_printk(KERN_NOTICE, sdkp, "READ CAPACITY failed\n");
2059 		read_capacity_error(sdkp, sdp, &sshdr, sense_valid, the_result);
2060 		return -EINVAL;
2061 	}
2062 
2063 	sector_size = get_unaligned_be32(&buffer[4]);
2064 	lba = get_unaligned_be32(&buffer[0]);
2065 
2066 	if (sdp->no_read_capacity_16 && (lba == 0xffffffff)) {
2067 		/* Some buggy (usb cardreader) devices return an lba of
2068 		   0xffffffff when the want to report a size of 0 (with
2069 		   which they really mean no media is present) */
2070 		sdkp->capacity = 0;
2071 		sdkp->physical_block_size = sector_size;
2072 		return sector_size;
2073 	}
2074 
2075 	if ((sizeof(sdkp->capacity) == 4) && (lba == 0xffffffff)) {
2076 		sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a "
2077 			"kernel compiled with support for large block "
2078 			"devices.\n");
2079 		sdkp->capacity = 0;
2080 		return -EOVERFLOW;
2081 	}
2082 
2083 	sdkp->capacity = lba + 1;
2084 	sdkp->physical_block_size = sector_size;
2085 	return sector_size;
2086 }
2087 
2088 static int sd_try_rc16_first(struct scsi_device *sdp)
2089 {
2090 	if (sdp->host->max_cmd_len < 16)
2091 		return 0;
2092 	if (sdp->try_rc_10_first)
2093 		return 0;
2094 	if (sdp->scsi_level > SCSI_SPC_2)
2095 		return 1;
2096 	if (scsi_device_protection(sdp))
2097 		return 1;
2098 	return 0;
2099 }
2100 
2101 /*
2102  * read disk capacity
2103  */
2104 static void
2105 sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer)
2106 {
2107 	int sector_size;
2108 	struct scsi_device *sdp = sdkp->device;
2109 	sector_t old_capacity = sdkp->capacity;
2110 
2111 	if (sd_try_rc16_first(sdp)) {
2112 		sector_size = read_capacity_16(sdkp, sdp, buffer);
2113 		if (sector_size == -EOVERFLOW)
2114 			goto got_data;
2115 		if (sector_size == -ENODEV)
2116 			return;
2117 		if (sector_size < 0)
2118 			sector_size = read_capacity_10(sdkp, sdp, buffer);
2119 		if (sector_size < 0)
2120 			return;
2121 	} else {
2122 		sector_size = read_capacity_10(sdkp, sdp, buffer);
2123 		if (sector_size == -EOVERFLOW)
2124 			goto got_data;
2125 		if (sector_size < 0)
2126 			return;
2127 		if ((sizeof(sdkp->capacity) > 4) &&
2128 		    (sdkp->capacity > 0xffffffffULL)) {
2129 			int old_sector_size = sector_size;
2130 			sd_printk(KERN_NOTICE, sdkp, "Very big device. "
2131 					"Trying to use READ CAPACITY(16).\n");
2132 			sector_size = read_capacity_16(sdkp, sdp, buffer);
2133 			if (sector_size < 0) {
2134 				sd_printk(KERN_NOTICE, sdkp,
2135 					"Using 0xffffffff as device size\n");
2136 				sdkp->capacity = 1 + (sector_t) 0xffffffff;
2137 				sector_size = old_sector_size;
2138 				goto got_data;
2139 			}
2140 		}
2141 	}
2142 
2143 	/* Some devices are known to return the total number of blocks,
2144 	 * not the highest block number.  Some devices have versions
2145 	 * which do this and others which do not.  Some devices we might
2146 	 * suspect of doing this but we don't know for certain.
2147 	 *
2148 	 * If we know the reported capacity is wrong, decrement it.  If
2149 	 * we can only guess, then assume the number of blocks is even
2150 	 * (usually true but not always) and err on the side of lowering
2151 	 * the capacity.
2152 	 */
2153 	if (sdp->fix_capacity ||
2154 	    (sdp->guess_capacity && (sdkp->capacity & 0x01))) {
2155 		sd_printk(KERN_INFO, sdkp, "Adjusting the sector count "
2156 				"from its reported value: %llu\n",
2157 				(unsigned long long) sdkp->capacity);
2158 		--sdkp->capacity;
2159 	}
2160 
2161 got_data:
2162 	if (sector_size == 0) {
2163 		sector_size = 512;
2164 		sd_printk(KERN_NOTICE, sdkp, "Sector size 0 reported, "
2165 			  "assuming 512.\n");
2166 	}
2167 
2168 	if (sector_size != 512 &&
2169 	    sector_size != 1024 &&
2170 	    sector_size != 2048 &&
2171 	    sector_size != 4096 &&
2172 	    sector_size != 256) {
2173 		sd_printk(KERN_NOTICE, sdkp, "Unsupported sector size %d.\n",
2174 			  sector_size);
2175 		/*
2176 		 * The user might want to re-format the drive with
2177 		 * a supported sectorsize.  Once this happens, it
2178 		 * would be relatively trivial to set the thing up.
2179 		 * For this reason, we leave the thing in the table.
2180 		 */
2181 		sdkp->capacity = 0;
2182 		/*
2183 		 * set a bogus sector size so the normal read/write
2184 		 * logic in the block layer will eventually refuse any
2185 		 * request on this device without tripping over power
2186 		 * of two sector size assumptions
2187 		 */
2188 		sector_size = 512;
2189 	}
2190 	blk_queue_logical_block_size(sdp->request_queue, sector_size);
2191 
2192 	{
2193 		char cap_str_2[10], cap_str_10[10];
2194 		u64 sz = (u64)sdkp->capacity << ilog2(sector_size);
2195 
2196 		string_get_size(sz, STRING_UNITS_2, cap_str_2,
2197 				sizeof(cap_str_2));
2198 		string_get_size(sz, STRING_UNITS_10, cap_str_10,
2199 				sizeof(cap_str_10));
2200 
2201 		if (sdkp->first_scan || old_capacity != sdkp->capacity) {
2202 			sd_printk(KERN_NOTICE, sdkp,
2203 				  "%llu %d-byte logical blocks: (%s/%s)\n",
2204 				  (unsigned long long)sdkp->capacity,
2205 				  sector_size, cap_str_10, cap_str_2);
2206 
2207 			if (sdkp->physical_block_size != sector_size)
2208 				sd_printk(KERN_NOTICE, sdkp,
2209 					  "%u-byte physical blocks\n",
2210 					  sdkp->physical_block_size);
2211 		}
2212 	}
2213 
2214 	sdp->use_16_for_rw = (sdkp->capacity > 0xffffffff);
2215 
2216 	/* Rescale capacity to 512-byte units */
2217 	if (sector_size == 4096)
2218 		sdkp->capacity <<= 3;
2219 	else if (sector_size == 2048)
2220 		sdkp->capacity <<= 2;
2221 	else if (sector_size == 1024)
2222 		sdkp->capacity <<= 1;
2223 	else if (sector_size == 256)
2224 		sdkp->capacity >>= 1;
2225 
2226 	blk_queue_physical_block_size(sdp->request_queue,
2227 				      sdkp->physical_block_size);
2228 	sdkp->device->sector_size = sector_size;
2229 }
2230 
2231 /* called with buffer of length 512 */
2232 static inline int
2233 sd_do_mode_sense(struct scsi_device *sdp, int dbd, int modepage,
2234 		 unsigned char *buffer, int len, struct scsi_mode_data *data,
2235 		 struct scsi_sense_hdr *sshdr)
2236 {
2237 	return scsi_mode_sense(sdp, dbd, modepage, buffer, len,
2238 			       SD_TIMEOUT, SD_MAX_RETRIES, data,
2239 			       sshdr);
2240 }
2241 
2242 /*
2243  * read write protect setting, if possible - called only in sd_revalidate_disk()
2244  * called with buffer of length SD_BUF_SIZE
2245  */
2246 static void
2247 sd_read_write_protect_flag(struct scsi_disk *sdkp, unsigned char *buffer)
2248 {
2249 	int res;
2250 	struct scsi_device *sdp = sdkp->device;
2251 	struct scsi_mode_data data;
2252 	int old_wp = sdkp->write_prot;
2253 
2254 	set_disk_ro(sdkp->disk, 0);
2255 	if (sdp->skip_ms_page_3f) {
2256 		sd_printk(KERN_NOTICE, sdkp, "Assuming Write Enabled\n");
2257 		return;
2258 	}
2259 
2260 	if (sdp->use_192_bytes_for_3f) {
2261 		res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 192, &data, NULL);
2262 	} else {
2263 		/*
2264 		 * First attempt: ask for all pages (0x3F), but only 4 bytes.
2265 		 * We have to start carefully: some devices hang if we ask
2266 		 * for more than is available.
2267 		 */
2268 		res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 4, &data, NULL);
2269 
2270 		/*
2271 		 * Second attempt: ask for page 0 When only page 0 is
2272 		 * implemented, a request for page 3F may return Sense Key
2273 		 * 5: Illegal Request, Sense Code 24: Invalid field in
2274 		 * CDB.
2275 		 */
2276 		if (!scsi_status_is_good(res))
2277 			res = sd_do_mode_sense(sdp, 0, 0, buffer, 4, &data, NULL);
2278 
2279 		/*
2280 		 * Third attempt: ask 255 bytes, as we did earlier.
2281 		 */
2282 		if (!scsi_status_is_good(res))
2283 			res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 255,
2284 					       &data, NULL);
2285 	}
2286 
2287 	if (!scsi_status_is_good(res)) {
2288 		sd_printk(KERN_WARNING, sdkp,
2289 			  "Test WP failed, assume Write Enabled\n");
2290 	} else {
2291 		sdkp->write_prot = ((data.device_specific & 0x80) != 0);
2292 		set_disk_ro(sdkp->disk, sdkp->write_prot);
2293 		if (sdkp->first_scan || old_wp != sdkp->write_prot) {
2294 			sd_printk(KERN_NOTICE, sdkp, "Write Protect is %s\n",
2295 				  sdkp->write_prot ? "on" : "off");
2296 			sd_printk(KERN_DEBUG, sdkp,
2297 				  "Mode Sense: %02x %02x %02x %02x\n",
2298 				  buffer[0], buffer[1], buffer[2], buffer[3]);
2299 		}
2300 	}
2301 }
2302 
2303 /*
2304  * sd_read_cache_type - called only from sd_revalidate_disk()
2305  * called with buffer of length SD_BUF_SIZE
2306  */
2307 static void
2308 sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer)
2309 {
2310 	int len = 0, res;
2311 	struct scsi_device *sdp = sdkp->device;
2312 
2313 	int dbd;
2314 	int modepage;
2315 	int first_len;
2316 	struct scsi_mode_data data;
2317 	struct scsi_sense_hdr sshdr;
2318 	int old_wce = sdkp->WCE;
2319 	int old_rcd = sdkp->RCD;
2320 	int old_dpofua = sdkp->DPOFUA;
2321 
2322 	first_len = 4;
2323 	if (sdp->skip_ms_page_8) {
2324 		if (sdp->type == TYPE_RBC)
2325 			goto defaults;
2326 		else {
2327 			if (sdp->skip_ms_page_3f)
2328 				goto defaults;
2329 			modepage = 0x3F;
2330 			if (sdp->use_192_bytes_for_3f)
2331 				first_len = 192;
2332 			dbd = 0;
2333 		}
2334 	} else if (sdp->type == TYPE_RBC) {
2335 		modepage = 6;
2336 		dbd = 8;
2337 	} else {
2338 		modepage = 8;
2339 		dbd = 0;
2340 	}
2341 
2342 	/* cautiously ask */
2343 	res = sd_do_mode_sense(sdp, dbd, modepage, buffer, first_len,
2344 			&data, &sshdr);
2345 
2346 	if (!scsi_status_is_good(res))
2347 		goto bad_sense;
2348 
2349 	if (!data.header_length) {
2350 		modepage = 6;
2351 		first_len = 0;
2352 		sd_printk(KERN_ERR, sdkp, "Missing header in MODE_SENSE response\n");
2353 	}
2354 
2355 	/* that went OK, now ask for the proper length */
2356 	len = data.length;
2357 
2358 	/*
2359 	 * We're only interested in the first three bytes, actually.
2360 	 * But the data cache page is defined for the first 20.
2361 	 */
2362 	if (len < 3)
2363 		goto bad_sense;
2364 	else if (len > SD_BUF_SIZE) {
2365 		sd_printk(KERN_NOTICE, sdkp, "Truncating mode parameter "
2366 			  "data from %d to %d bytes\n", len, SD_BUF_SIZE);
2367 		len = SD_BUF_SIZE;
2368 	}
2369 	if (modepage == 0x3F && sdp->use_192_bytes_for_3f)
2370 		len = 192;
2371 
2372 	/* Get the data */
2373 	if (len > first_len)
2374 		res = sd_do_mode_sense(sdp, dbd, modepage, buffer, len,
2375 				&data, &sshdr);
2376 
2377 	if (scsi_status_is_good(res)) {
2378 		int offset = data.header_length + data.block_descriptor_length;
2379 
2380 		while (offset < len) {
2381 			u8 page_code = buffer[offset] & 0x3F;
2382 			u8 spf       = buffer[offset] & 0x40;
2383 
2384 			if (page_code == 8 || page_code == 6) {
2385 				/* We're interested only in the first 3 bytes.
2386 				 */
2387 				if (len - offset <= 2) {
2388 					sd_printk(KERN_ERR, sdkp, "Incomplete "
2389 						  "mode parameter data\n");
2390 					goto defaults;
2391 				} else {
2392 					modepage = page_code;
2393 					goto Page_found;
2394 				}
2395 			} else {
2396 				/* Go to the next page */
2397 				if (spf && len - offset > 3)
2398 					offset += 4 + (buffer[offset+2] << 8) +
2399 						buffer[offset+3];
2400 				else if (!spf && len - offset > 1)
2401 					offset += 2 + buffer[offset+1];
2402 				else {
2403 					sd_printk(KERN_ERR, sdkp, "Incomplete "
2404 						  "mode parameter data\n");
2405 					goto defaults;
2406 				}
2407 			}
2408 		}
2409 
2410 		if (modepage == 0x3F) {
2411 			sd_printk(KERN_ERR, sdkp, "No Caching mode page "
2412 				  "present\n");
2413 			goto defaults;
2414 		} else if ((buffer[offset] & 0x3f) != modepage) {
2415 			sd_printk(KERN_ERR, sdkp, "Got wrong page\n");
2416 			goto defaults;
2417 		}
2418 	Page_found:
2419 		if (modepage == 8) {
2420 			sdkp->WCE = ((buffer[offset + 2] & 0x04) != 0);
2421 			sdkp->RCD = ((buffer[offset + 2] & 0x01) != 0);
2422 		} else {
2423 			sdkp->WCE = ((buffer[offset + 2] & 0x01) == 0);
2424 			sdkp->RCD = 0;
2425 		}
2426 
2427 		sdkp->DPOFUA = (data.device_specific & 0x10) != 0;
2428 		if (sdkp->DPOFUA && !sdkp->device->use_10_for_rw) {
2429 			sd_printk(KERN_NOTICE, sdkp,
2430 				  "Uses READ/WRITE(6), disabling FUA\n");
2431 			sdkp->DPOFUA = 0;
2432 		}
2433 
2434 		if (sdkp->first_scan || old_wce != sdkp->WCE ||
2435 		    old_rcd != sdkp->RCD || old_dpofua != sdkp->DPOFUA)
2436 			sd_printk(KERN_NOTICE, sdkp,
2437 				  "Write cache: %s, read cache: %s, %s\n",
2438 				  sdkp->WCE ? "enabled" : "disabled",
2439 				  sdkp->RCD ? "disabled" : "enabled",
2440 				  sdkp->DPOFUA ? "supports DPO and FUA"
2441 				  : "doesn't support DPO or FUA");
2442 
2443 		return;
2444 	}
2445 
2446 bad_sense:
2447 	if (scsi_sense_valid(&sshdr) &&
2448 	    sshdr.sense_key == ILLEGAL_REQUEST &&
2449 	    sshdr.asc == 0x24 && sshdr.ascq == 0x0)
2450 		/* Invalid field in CDB */
2451 		sd_printk(KERN_NOTICE, sdkp, "Cache data unavailable\n");
2452 	else
2453 		sd_printk(KERN_ERR, sdkp, "Asking for cache data failed\n");
2454 
2455 defaults:
2456 	if (sdp->wce_default_on) {
2457 		sd_printk(KERN_NOTICE, sdkp, "Assuming drive cache: write back\n");
2458 		sdkp->WCE = 1;
2459 	} else {
2460 		sd_printk(KERN_ERR, sdkp, "Assuming drive cache: write through\n");
2461 		sdkp->WCE = 0;
2462 	}
2463 	sdkp->RCD = 0;
2464 	sdkp->DPOFUA = 0;
2465 }
2466 
2467 /*
2468  * The ATO bit indicates whether the DIF application tag is available
2469  * for use by the operating system.
2470  */
2471 static void sd_read_app_tag_own(struct scsi_disk *sdkp, unsigned char *buffer)
2472 {
2473 	int res, offset;
2474 	struct scsi_device *sdp = sdkp->device;
2475 	struct scsi_mode_data data;
2476 	struct scsi_sense_hdr sshdr;
2477 
2478 	if (sdp->type != TYPE_DISK)
2479 		return;
2480 
2481 	if (sdkp->protection_type == 0)
2482 		return;
2483 
2484 	res = scsi_mode_sense(sdp, 1, 0x0a, buffer, 36, SD_TIMEOUT,
2485 			      SD_MAX_RETRIES, &data, &sshdr);
2486 
2487 	if (!scsi_status_is_good(res) || !data.header_length ||
2488 	    data.length < 6) {
2489 		sd_printk(KERN_WARNING, sdkp,
2490 			  "getting Control mode page failed, assume no ATO\n");
2491 
2492 		if (scsi_sense_valid(&sshdr))
2493 			sd_print_sense_hdr(sdkp, &sshdr);
2494 
2495 		return;
2496 	}
2497 
2498 	offset = data.header_length + data.block_descriptor_length;
2499 
2500 	if ((buffer[offset] & 0x3f) != 0x0a) {
2501 		sd_printk(KERN_ERR, sdkp, "ATO Got wrong page\n");
2502 		return;
2503 	}
2504 
2505 	if ((buffer[offset + 5] & 0x80) == 0)
2506 		return;
2507 
2508 	sdkp->ATO = 1;
2509 
2510 	return;
2511 }
2512 
2513 /**
2514  * sd_read_block_limits - Query disk device for preferred I/O sizes.
2515  * @disk: disk to query
2516  */
2517 static void sd_read_block_limits(struct scsi_disk *sdkp)
2518 {
2519 	unsigned int sector_sz = sdkp->device->sector_size;
2520 	const int vpd_len = 64;
2521 	unsigned char *buffer = kmalloc(vpd_len, GFP_KERNEL);
2522 
2523 	if (!buffer ||
2524 	    /* Block Limits VPD */
2525 	    scsi_get_vpd_page(sdkp->device, 0xb0, buffer, vpd_len))
2526 		goto out;
2527 
2528 	blk_queue_io_min(sdkp->disk->queue,
2529 			 get_unaligned_be16(&buffer[6]) * sector_sz);
2530 	blk_queue_io_opt(sdkp->disk->queue,
2531 			 get_unaligned_be32(&buffer[12]) * sector_sz);
2532 
2533 	if (buffer[3] == 0x3c) {
2534 		unsigned int lba_count, desc_count;
2535 
2536 		sdkp->max_ws_blocks = (u32)get_unaligned_be64(&buffer[36]);
2537 
2538 		if (!sdkp->lbpme)
2539 			goto out;
2540 
2541 		lba_count = get_unaligned_be32(&buffer[20]);
2542 		desc_count = get_unaligned_be32(&buffer[24]);
2543 
2544 		if (lba_count && desc_count)
2545 			sdkp->max_unmap_blocks = lba_count;
2546 
2547 		sdkp->unmap_granularity = get_unaligned_be32(&buffer[28]);
2548 
2549 		if (buffer[32] & 0x80)
2550 			sdkp->unmap_alignment =
2551 				get_unaligned_be32(&buffer[32]) & ~(1 << 31);
2552 
2553 		if (!sdkp->lbpvpd) { /* LBP VPD page not provided */
2554 
2555 			if (sdkp->max_unmap_blocks)
2556 				sd_config_discard(sdkp, SD_LBP_UNMAP);
2557 			else
2558 				sd_config_discard(sdkp, SD_LBP_WS16);
2559 
2560 		} else {	/* LBP VPD page tells us what to use */
2561 
2562 			if (sdkp->lbpu && sdkp->max_unmap_blocks)
2563 				sd_config_discard(sdkp, SD_LBP_UNMAP);
2564 			else if (sdkp->lbpws)
2565 				sd_config_discard(sdkp, SD_LBP_WS16);
2566 			else if (sdkp->lbpws10)
2567 				sd_config_discard(sdkp, SD_LBP_WS10);
2568 			else
2569 				sd_config_discard(sdkp, SD_LBP_DISABLE);
2570 		}
2571 	}
2572 
2573  out:
2574 	kfree(buffer);
2575 }
2576 
2577 /**
2578  * sd_read_block_characteristics - Query block dev. characteristics
2579  * @disk: disk to query
2580  */
2581 static void sd_read_block_characteristics(struct scsi_disk *sdkp)
2582 {
2583 	unsigned char *buffer;
2584 	u16 rot;
2585 	const int vpd_len = 64;
2586 
2587 	buffer = kmalloc(vpd_len, GFP_KERNEL);
2588 
2589 	if (!buffer ||
2590 	    /* Block Device Characteristics VPD */
2591 	    scsi_get_vpd_page(sdkp->device, 0xb1, buffer, vpd_len))
2592 		goto out;
2593 
2594 	rot = get_unaligned_be16(&buffer[4]);
2595 
2596 	if (rot == 1)
2597 		queue_flag_set_unlocked(QUEUE_FLAG_NONROT, sdkp->disk->queue);
2598 
2599  out:
2600 	kfree(buffer);
2601 }
2602 
2603 /**
2604  * sd_read_block_provisioning - Query provisioning VPD page
2605  * @disk: disk to query
2606  */
2607 static void sd_read_block_provisioning(struct scsi_disk *sdkp)
2608 {
2609 	unsigned char *buffer;
2610 	const int vpd_len = 8;
2611 
2612 	if (sdkp->lbpme == 0)
2613 		return;
2614 
2615 	buffer = kmalloc(vpd_len, GFP_KERNEL);
2616 
2617 	if (!buffer || scsi_get_vpd_page(sdkp->device, 0xb2, buffer, vpd_len))
2618 		goto out;
2619 
2620 	sdkp->lbpvpd	= 1;
2621 	sdkp->lbpu	= (buffer[5] >> 7) & 1;	/* UNMAP */
2622 	sdkp->lbpws	= (buffer[5] >> 6) & 1;	/* WRITE SAME(16) with UNMAP */
2623 	sdkp->lbpws10	= (buffer[5] >> 5) & 1;	/* WRITE SAME(10) with UNMAP */
2624 
2625  out:
2626 	kfree(buffer);
2627 }
2628 
2629 static void sd_read_write_same(struct scsi_disk *sdkp, unsigned char *buffer)
2630 {
2631 	if (scsi_report_opcode(sdkp->device, buffer, SD_BUF_SIZE,
2632 			       WRITE_SAME_16))
2633 		sdkp->ws16 = 1;
2634 }
2635 
2636 static int sd_try_extended_inquiry(struct scsi_device *sdp)
2637 {
2638 	/*
2639 	 * Although VPD inquiries can go to SCSI-2 type devices,
2640 	 * some USB ones crash on receiving them, and the pages
2641 	 * we currently ask for are for SPC-3 and beyond
2642 	 */
2643 	if (sdp->scsi_level > SCSI_SPC_2 && !sdp->skip_vpd_pages)
2644 		return 1;
2645 	return 0;
2646 }
2647 
2648 /**
2649  *	sd_revalidate_disk - called the first time a new disk is seen,
2650  *	performs disk spin up, read_capacity, etc.
2651  *	@disk: struct gendisk we care about
2652  **/
2653 static int sd_revalidate_disk(struct gendisk *disk)
2654 {
2655 	struct scsi_disk *sdkp = scsi_disk(disk);
2656 	struct scsi_device *sdp = sdkp->device;
2657 	unsigned char *buffer;
2658 	unsigned flush = 0;
2659 
2660 	SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp,
2661 				      "sd_revalidate_disk\n"));
2662 
2663 	/*
2664 	 * If the device is offline, don't try and read capacity or any
2665 	 * of the other niceties.
2666 	 */
2667 	if (!scsi_device_online(sdp))
2668 		goto out;
2669 
2670 	buffer = kmalloc(SD_BUF_SIZE, GFP_KERNEL);
2671 	if (!buffer) {
2672 		sd_printk(KERN_WARNING, sdkp, "sd_revalidate_disk: Memory "
2673 			  "allocation failure.\n");
2674 		goto out;
2675 	}
2676 
2677 	sd_spinup_disk(sdkp);
2678 
2679 	/*
2680 	 * Without media there is no reason to ask; moreover, some devices
2681 	 * react badly if we do.
2682 	 */
2683 	if (sdkp->media_present) {
2684 		sd_read_capacity(sdkp, buffer);
2685 
2686 		if (sd_try_extended_inquiry(sdp)) {
2687 			sd_read_block_provisioning(sdkp);
2688 			sd_read_block_limits(sdkp);
2689 			sd_read_block_characteristics(sdkp);
2690 		}
2691 
2692 		sd_read_write_protect_flag(sdkp, buffer);
2693 		sd_read_cache_type(sdkp, buffer);
2694 		sd_read_app_tag_own(sdkp, buffer);
2695 		sd_read_write_same(sdkp, buffer);
2696 	}
2697 
2698 	sdkp->first_scan = 0;
2699 
2700 	/*
2701 	 * We now have all cache related info, determine how we deal
2702 	 * with flush requests.
2703 	 */
2704 	if (sdkp->WCE) {
2705 		flush |= REQ_FLUSH;
2706 		if (sdkp->DPOFUA)
2707 			flush |= REQ_FUA;
2708 	}
2709 
2710 	blk_queue_flush(sdkp->disk->queue, flush);
2711 
2712 	set_capacity(disk, sdkp->capacity);
2713 	sd_config_write_same(sdkp);
2714 	kfree(buffer);
2715 
2716  out:
2717 	return 0;
2718 }
2719 
2720 /**
2721  *	sd_unlock_native_capacity - unlock native capacity
2722  *	@disk: struct gendisk to set capacity for
2723  *
2724  *	Block layer calls this function if it detects that partitions
2725  *	on @disk reach beyond the end of the device.  If the SCSI host
2726  *	implements ->unlock_native_capacity() method, it's invoked to
2727  *	give it a chance to adjust the device capacity.
2728  *
2729  *	CONTEXT:
2730  *	Defined by block layer.  Might sleep.
2731  */
2732 static void sd_unlock_native_capacity(struct gendisk *disk)
2733 {
2734 	struct scsi_device *sdev = scsi_disk(disk)->device;
2735 
2736 	if (sdev->host->hostt->unlock_native_capacity)
2737 		sdev->host->hostt->unlock_native_capacity(sdev);
2738 }
2739 
2740 /**
2741  *	sd_format_disk_name - format disk name
2742  *	@prefix: name prefix - ie. "sd" for SCSI disks
2743  *	@index: index of the disk to format name for
2744  *	@buf: output buffer
2745  *	@buflen: length of the output buffer
2746  *
2747  *	SCSI disk names starts at sda.  The 26th device is sdz and the
2748  *	27th is sdaa.  The last one for two lettered suffix is sdzz
2749  *	which is followed by sdaaa.
2750  *
2751  *	This is basically 26 base counting with one extra 'nil' entry
2752  *	at the beginning from the second digit on and can be
2753  *	determined using similar method as 26 base conversion with the
2754  *	index shifted -1 after each digit is computed.
2755  *
2756  *	CONTEXT:
2757  *	Don't care.
2758  *
2759  *	RETURNS:
2760  *	0 on success, -errno on failure.
2761  */
2762 static int sd_format_disk_name(char *prefix, int index, char *buf, int buflen)
2763 {
2764 	const int base = 'z' - 'a' + 1;
2765 	char *begin = buf + strlen(prefix);
2766 	char *end = buf + buflen;
2767 	char *p;
2768 	int unit;
2769 
2770 	p = end - 1;
2771 	*p = '\0';
2772 	unit = base;
2773 	do {
2774 		if (p == begin)
2775 			return -EINVAL;
2776 		*--p = 'a' + (index % unit);
2777 		index = (index / unit) - 1;
2778 	} while (index >= 0);
2779 
2780 	memmove(begin, p, end - p);
2781 	memcpy(buf, prefix, strlen(prefix));
2782 
2783 	return 0;
2784 }
2785 
2786 /*
2787  * The asynchronous part of sd_probe
2788  */
2789 static void sd_probe_async(void *data, async_cookie_t cookie)
2790 {
2791 	struct scsi_disk *sdkp = data;
2792 	struct scsi_device *sdp;
2793 	struct gendisk *gd;
2794 	u32 index;
2795 	struct device *dev;
2796 
2797 	sdp = sdkp->device;
2798 	gd = sdkp->disk;
2799 	index = sdkp->index;
2800 	dev = &sdp->sdev_gendev;
2801 
2802 	gd->major = sd_major((index & 0xf0) >> 4);
2803 	gd->first_minor = ((index & 0xf) << 4) | (index & 0xfff00);
2804 	gd->minors = SD_MINORS;
2805 
2806 	gd->fops = &sd_fops;
2807 	gd->private_data = &sdkp->driver;
2808 	gd->queue = sdkp->device->request_queue;
2809 
2810 	/* defaults, until the device tells us otherwise */
2811 	sdp->sector_size = 512;
2812 	sdkp->capacity = 0;
2813 	sdkp->media_present = 1;
2814 	sdkp->write_prot = 0;
2815 	sdkp->WCE = 0;
2816 	sdkp->RCD = 0;
2817 	sdkp->ATO = 0;
2818 	sdkp->first_scan = 1;
2819 	sdkp->max_medium_access_timeouts = SD_MAX_MEDIUM_TIMEOUTS;
2820 
2821 	sd_revalidate_disk(gd);
2822 
2823 	blk_queue_prep_rq(sdp->request_queue, sd_prep_fn);
2824 	blk_queue_unprep_rq(sdp->request_queue, sd_unprep_fn);
2825 
2826 	gd->driverfs_dev = &sdp->sdev_gendev;
2827 	gd->flags = GENHD_FL_EXT_DEVT;
2828 	if (sdp->removable) {
2829 		gd->flags |= GENHD_FL_REMOVABLE;
2830 		gd->events |= DISK_EVENT_MEDIA_CHANGE;
2831 	}
2832 
2833 	add_disk(gd);
2834 	if (sdkp->capacity)
2835 		sd_dif_config_host(sdkp);
2836 
2837 	sd_revalidate_disk(gd);
2838 
2839 	sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n",
2840 		  sdp->removable ? "removable " : "");
2841 	scsi_autopm_put_device(sdp);
2842 	put_device(&sdkp->dev);
2843 }
2844 
2845 /**
2846  *	sd_probe - called during driver initialization and whenever a
2847  *	new scsi device is attached to the system. It is called once
2848  *	for each scsi device (not just disks) present.
2849  *	@dev: pointer to device object
2850  *
2851  *	Returns 0 if successful (or not interested in this scsi device
2852  *	(e.g. scanner)); 1 when there is an error.
2853  *
2854  *	Note: this function is invoked from the scsi mid-level.
2855  *	This function sets up the mapping between a given
2856  *	<host,channel,id,lun> (found in sdp) and new device name
2857  *	(e.g. /dev/sda). More precisely it is the block device major
2858  *	and minor number that is chosen here.
2859  *
2860  *	Assume sd_probe is not re-entrant (for time being)
2861  *	Also think about sd_probe() and sd_remove() running coincidentally.
2862  **/
2863 static int sd_probe(struct device *dev)
2864 {
2865 	struct scsi_device *sdp = to_scsi_device(dev);
2866 	struct scsi_disk *sdkp;
2867 	struct gendisk *gd;
2868 	int index;
2869 	int error;
2870 
2871 	error = -ENODEV;
2872 	if (sdp->type != TYPE_DISK && sdp->type != TYPE_MOD && sdp->type != TYPE_RBC)
2873 		goto out;
2874 
2875 	SCSI_LOG_HLQUEUE(3, sdev_printk(KERN_INFO, sdp,
2876 					"sd_probe\n"));
2877 
2878 	error = -ENOMEM;
2879 	sdkp = kzalloc(sizeof(*sdkp), GFP_KERNEL);
2880 	if (!sdkp)
2881 		goto out;
2882 
2883 	gd = alloc_disk(SD_MINORS);
2884 	if (!gd)
2885 		goto out_free;
2886 
2887 	do {
2888 		if (!ida_pre_get(&sd_index_ida, GFP_KERNEL))
2889 			goto out_put;
2890 
2891 		spin_lock(&sd_index_lock);
2892 		error = ida_get_new(&sd_index_ida, &index);
2893 		spin_unlock(&sd_index_lock);
2894 	} while (error == -EAGAIN);
2895 
2896 	if (error) {
2897 		sdev_printk(KERN_WARNING, sdp, "sd_probe: memory exhausted.\n");
2898 		goto out_put;
2899 	}
2900 
2901 	error = sd_format_disk_name("sd", index, gd->disk_name, DISK_NAME_LEN);
2902 	if (error) {
2903 		sdev_printk(KERN_WARNING, sdp, "SCSI disk (sd) name length exceeded.\n");
2904 		goto out_free_index;
2905 	}
2906 
2907 	sdkp->device = sdp;
2908 	sdkp->driver = &sd_template;
2909 	sdkp->disk = gd;
2910 	sdkp->index = index;
2911 	atomic_set(&sdkp->openers, 0);
2912 	atomic_set(&sdkp->device->ioerr_cnt, 0);
2913 
2914 	if (!sdp->request_queue->rq_timeout) {
2915 		if (sdp->type != TYPE_MOD)
2916 			blk_queue_rq_timeout(sdp->request_queue, SD_TIMEOUT);
2917 		else
2918 			blk_queue_rq_timeout(sdp->request_queue,
2919 					     SD_MOD_TIMEOUT);
2920 	}
2921 
2922 	device_initialize(&sdkp->dev);
2923 	sdkp->dev.parent = dev;
2924 	sdkp->dev.class = &sd_disk_class;
2925 	dev_set_name(&sdkp->dev, dev_name(dev));
2926 
2927 	if (device_add(&sdkp->dev))
2928 		goto out_free_index;
2929 
2930 	get_device(dev);
2931 	dev_set_drvdata(dev, sdkp);
2932 
2933 	get_device(&sdkp->dev);	/* prevent release before async_schedule */
2934 	async_schedule_domain(sd_probe_async, sdkp, &scsi_sd_probe_domain);
2935 
2936 	return 0;
2937 
2938  out_free_index:
2939 	spin_lock(&sd_index_lock);
2940 	ida_remove(&sd_index_ida, index);
2941 	spin_unlock(&sd_index_lock);
2942  out_put:
2943 	put_disk(gd);
2944  out_free:
2945 	kfree(sdkp);
2946  out:
2947 	return error;
2948 }
2949 
2950 /**
2951  *	sd_remove - called whenever a scsi disk (previously recognized by
2952  *	sd_probe) is detached from the system. It is called (potentially
2953  *	multiple times) during sd module unload.
2954  *	@sdp: pointer to mid level scsi device object
2955  *
2956  *	Note: this function is invoked from the scsi mid-level.
2957  *	This function potentially frees up a device name (e.g. /dev/sdc)
2958  *	that could be re-used by a subsequent sd_probe().
2959  *	This function is not called when the built-in sd driver is "exit-ed".
2960  **/
2961 static int sd_remove(struct device *dev)
2962 {
2963 	struct scsi_disk *sdkp;
2964 
2965 	sdkp = dev_get_drvdata(dev);
2966 	scsi_autopm_get_device(sdkp->device);
2967 
2968 	async_synchronize_full_domain(&scsi_sd_probe_domain);
2969 	blk_queue_prep_rq(sdkp->device->request_queue, scsi_prep_fn);
2970 	blk_queue_unprep_rq(sdkp->device->request_queue, NULL);
2971 	device_del(&sdkp->dev);
2972 	del_gendisk(sdkp->disk);
2973 	sd_shutdown(dev);
2974 
2975 	mutex_lock(&sd_ref_mutex);
2976 	dev_set_drvdata(dev, NULL);
2977 	put_device(&sdkp->dev);
2978 	mutex_unlock(&sd_ref_mutex);
2979 
2980 	return 0;
2981 }
2982 
2983 /**
2984  *	scsi_disk_release - Called to free the scsi_disk structure
2985  *	@dev: pointer to embedded class device
2986  *
2987  *	sd_ref_mutex must be held entering this routine.  Because it is
2988  *	called on last put, you should always use the scsi_disk_get()
2989  *	scsi_disk_put() helpers which manipulate the semaphore directly
2990  *	and never do a direct put_device.
2991  **/
2992 static void scsi_disk_release(struct device *dev)
2993 {
2994 	struct scsi_disk *sdkp = to_scsi_disk(dev);
2995 	struct gendisk *disk = sdkp->disk;
2996 
2997 	spin_lock(&sd_index_lock);
2998 	ida_remove(&sd_index_ida, sdkp->index);
2999 	spin_unlock(&sd_index_lock);
3000 
3001 	disk->private_data = NULL;
3002 	put_disk(disk);
3003 	put_device(&sdkp->device->sdev_gendev);
3004 
3005 	kfree(sdkp);
3006 }
3007 
3008 static int sd_start_stop_device(struct scsi_disk *sdkp, int start)
3009 {
3010 	unsigned char cmd[6] = { START_STOP };	/* START_VALID */
3011 	struct scsi_sense_hdr sshdr;
3012 	struct scsi_device *sdp = sdkp->device;
3013 	int res;
3014 
3015 	if (start)
3016 		cmd[4] |= 1;	/* START */
3017 
3018 	if (sdp->start_stop_pwr_cond)
3019 		cmd[4] |= start ? 1 << 4 : 3 << 4;	/* Active or Standby */
3020 
3021 	if (!scsi_device_online(sdp))
3022 		return -ENODEV;
3023 
3024 	res = scsi_execute_req(sdp, cmd, DMA_NONE, NULL, 0, &sshdr,
3025 			       SD_TIMEOUT, SD_MAX_RETRIES, NULL);
3026 	if (res) {
3027 		sd_printk(KERN_WARNING, sdkp, "START_STOP FAILED\n");
3028 		sd_print_result(sdkp, res);
3029 		if (driver_byte(res) & DRIVER_SENSE)
3030 			sd_print_sense_hdr(sdkp, &sshdr);
3031 	}
3032 
3033 	return res;
3034 }
3035 
3036 /*
3037  * Send a SYNCHRONIZE CACHE instruction down to the device through
3038  * the normal SCSI command structure.  Wait for the command to
3039  * complete.
3040  */
3041 static void sd_shutdown(struct device *dev)
3042 {
3043 	struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
3044 
3045 	if (!sdkp)
3046 		return;         /* this can happen */
3047 
3048 	if (pm_runtime_suspended(dev))
3049 		goto exit;
3050 
3051 	if (sdkp->WCE) {
3052 		sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
3053 		sd_sync_cache(sdkp);
3054 	}
3055 
3056 	if (system_state != SYSTEM_RESTART && sdkp->device->manage_start_stop) {
3057 		sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
3058 		sd_start_stop_device(sdkp, 0);
3059 	}
3060 
3061 exit:
3062 	scsi_disk_put(sdkp);
3063 }
3064 
3065 static int sd_suspend(struct device *dev)
3066 {
3067 	struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
3068 	int ret = 0;
3069 
3070 	if (!sdkp)
3071 		return 0;	/* this can happen */
3072 
3073 	if (sdkp->WCE) {
3074 		sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
3075 		ret = sd_sync_cache(sdkp);
3076 		if (ret)
3077 			goto done;
3078 	}
3079 
3080 	if (sdkp->device->manage_start_stop) {
3081 		sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
3082 		ret = sd_start_stop_device(sdkp, 0);
3083 	}
3084 
3085 done:
3086 	scsi_disk_put(sdkp);
3087 	return ret;
3088 }
3089 
3090 static int sd_resume(struct device *dev)
3091 {
3092 	struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
3093 	int ret = 0;
3094 
3095 	if (!sdkp->device->manage_start_stop)
3096 		goto done;
3097 
3098 	sd_printk(KERN_NOTICE, sdkp, "Starting disk\n");
3099 	ret = sd_start_stop_device(sdkp, 1);
3100 
3101 done:
3102 	scsi_disk_put(sdkp);
3103 	return ret;
3104 }
3105 
3106 /**
3107  *	init_sd - entry point for this driver (both when built in or when
3108  *	a module).
3109  *
3110  *	Note: this function registers this driver with the scsi mid-level.
3111  **/
3112 static int __init init_sd(void)
3113 {
3114 	int majors = 0, i, err;
3115 
3116 	SCSI_LOG_HLQUEUE(3, printk("init_sd: sd driver entry point\n"));
3117 
3118 	for (i = 0; i < SD_MAJORS; i++)
3119 		if (register_blkdev(sd_major(i), "sd") == 0)
3120 			majors++;
3121 
3122 	if (!majors)
3123 		return -ENODEV;
3124 
3125 	err = class_register(&sd_disk_class);
3126 	if (err)
3127 		goto err_out;
3128 
3129 	sd_cdb_cache = kmem_cache_create("sd_ext_cdb", SD_EXT_CDB_SIZE,
3130 					 0, 0, NULL);
3131 	if (!sd_cdb_cache) {
3132 		printk(KERN_ERR "sd: can't init extended cdb cache\n");
3133 		goto err_out_class;
3134 	}
3135 
3136 	sd_cdb_pool = mempool_create_slab_pool(SD_MEMPOOL_SIZE, sd_cdb_cache);
3137 	if (!sd_cdb_pool) {
3138 		printk(KERN_ERR "sd: can't init extended cdb pool\n");
3139 		goto err_out_cache;
3140 	}
3141 
3142 	err = scsi_register_driver(&sd_template.gendrv);
3143 	if (err)
3144 		goto err_out_driver;
3145 
3146 	return 0;
3147 
3148 err_out_driver:
3149 	mempool_destroy(sd_cdb_pool);
3150 
3151 err_out_cache:
3152 	kmem_cache_destroy(sd_cdb_cache);
3153 
3154 err_out_class:
3155 	class_unregister(&sd_disk_class);
3156 err_out:
3157 	for (i = 0; i < SD_MAJORS; i++)
3158 		unregister_blkdev(sd_major(i), "sd");
3159 	return err;
3160 }
3161 
3162 /**
3163  *	exit_sd - exit point for this driver (when it is a module).
3164  *
3165  *	Note: this function unregisters this driver from the scsi mid-level.
3166  **/
3167 static void __exit exit_sd(void)
3168 {
3169 	int i;
3170 
3171 	SCSI_LOG_HLQUEUE(3, printk("exit_sd: exiting sd driver\n"));
3172 
3173 	scsi_unregister_driver(&sd_template.gendrv);
3174 	mempool_destroy(sd_cdb_pool);
3175 	kmem_cache_destroy(sd_cdb_cache);
3176 
3177 	class_unregister(&sd_disk_class);
3178 
3179 	for (i = 0; i < SD_MAJORS; i++)
3180 		unregister_blkdev(sd_major(i), "sd");
3181 }
3182 
3183 module_init(init_sd);
3184 module_exit(exit_sd);
3185 
3186 static void sd_print_sense_hdr(struct scsi_disk *sdkp,
3187 			       struct scsi_sense_hdr *sshdr)
3188 {
3189 	sd_printk(KERN_INFO, sdkp, " ");
3190 	scsi_show_sense_hdr(sshdr);
3191 	sd_printk(KERN_INFO, sdkp, " ");
3192 	scsi_show_extd_sense(sshdr->asc, sshdr->ascq);
3193 }
3194 
3195 static void sd_print_result(struct scsi_disk *sdkp, int result)
3196 {
3197 	sd_printk(KERN_INFO, sdkp, " ");
3198 	scsi_show_result(result);
3199 }
3200 
3201