1 /* 2 * linux/drivers/scsi/scsi_proc.c 3 * 4 * The functions in this file provide an interface between 5 * the PROC file system and the SCSI device drivers 6 * It is mainly used for debugging, statistics and to pass 7 * information directly to the lowlevel driver. 8 * 9 * (c) 1995 Michael Neuffer neuffer@goofy.zdv.uni-mainz.de 10 * Version: 0.99.8 last change: 95/09/13 11 * 12 * generic command parser provided by: 13 * Andreas Heilwagen <crashcar@informatik.uni-koblenz.de> 14 * 15 * generic_proc_info() support of xxxx_info() by: 16 * Michael A. Griffith <grif@acm.org> 17 */ 18 19 #include <linux/module.h> 20 #include <linux/init.h> 21 #include <linux/string.h> 22 #include <linux/mm.h> 23 #include <linux/proc_fs.h> 24 #include <linux/errno.h> 25 #include <linux/blkdev.h> 26 #include <linux/seq_file.h> 27 #include <linux/mutex.h> 28 #include <linux/gfp.h> 29 #include <asm/uaccess.h> 30 31 #include <scsi/scsi.h> 32 #include <scsi/scsi_device.h> 33 #include <scsi/scsi_host.h> 34 #include <scsi/scsi_transport.h> 35 36 #include "scsi_priv.h" 37 #include "scsi_logging.h" 38 39 40 /* 4K page size, but our output routines, use some slack for overruns */ 41 #define PROC_BLOCK_SIZE (3*1024) 42 43 static struct proc_dir_entry *proc_scsi; 44 45 /* Protect sht->present and sht->proc_dir */ 46 static DEFINE_MUTEX(global_host_template_mutex); 47 48 static ssize_t proc_scsi_host_write(struct file *file, const char __user *buf, 49 size_t count, loff_t *ppos) 50 { 51 struct Scsi_Host *shost = PDE_DATA(file_inode(file)); 52 ssize_t ret = -ENOMEM; 53 char *page; 54 55 if (count > PROC_BLOCK_SIZE) 56 return -EOVERFLOW; 57 58 if (!shost->hostt->write_info) 59 return -EINVAL; 60 61 page = (char *)__get_free_page(GFP_KERNEL); 62 if (page) { 63 ret = -EFAULT; 64 if (copy_from_user(page, buf, count)) 65 goto out; 66 ret = shost->hostt->write_info(shost, page, count); 67 } 68 out: 69 free_page((unsigned long)page); 70 return ret; 71 } 72 73 static int proc_scsi_show(struct seq_file *m, void *v) 74 { 75 struct Scsi_Host *shost = m->private; 76 return shost->hostt->show_info(m, shost); 77 } 78 79 static int proc_scsi_host_open(struct inode *inode, struct file *file) 80 { 81 return single_open_size(file, proc_scsi_show, PDE_DATA(inode), 82 4 * PAGE_SIZE); 83 } 84 85 static const struct file_operations proc_scsi_fops = { 86 .open = proc_scsi_host_open, 87 .release = single_release, 88 .read = seq_read, 89 .llseek = seq_lseek, 90 .write = proc_scsi_host_write 91 }; 92 93 /** 94 * scsi_proc_hostdir_add - Create directory in /proc for a scsi host 95 * @sht: owner of this directory 96 * 97 * Sets sht->proc_dir to the new directory. 98 */ 99 100 void scsi_proc_hostdir_add(struct scsi_host_template *sht) 101 { 102 if (!sht->show_info) 103 return; 104 105 mutex_lock(&global_host_template_mutex); 106 if (!sht->present++) { 107 sht->proc_dir = proc_mkdir(sht->proc_name, proc_scsi); 108 if (!sht->proc_dir) 109 printk(KERN_ERR "%s: proc_mkdir failed for %s\n", 110 __func__, sht->proc_name); 111 } 112 mutex_unlock(&global_host_template_mutex); 113 } 114 115 /** 116 * scsi_proc_hostdir_rm - remove directory in /proc for a scsi host 117 * @sht: owner of directory 118 */ 119 void scsi_proc_hostdir_rm(struct scsi_host_template *sht) 120 { 121 if (!sht->show_info) 122 return; 123 124 mutex_lock(&global_host_template_mutex); 125 if (!--sht->present && sht->proc_dir) { 126 remove_proc_entry(sht->proc_name, proc_scsi); 127 sht->proc_dir = NULL; 128 } 129 mutex_unlock(&global_host_template_mutex); 130 } 131 132 133 /** 134 * scsi_proc_host_add - Add entry for this host to appropriate /proc dir 135 * @shost: host to add 136 */ 137 void scsi_proc_host_add(struct Scsi_Host *shost) 138 { 139 struct scsi_host_template *sht = shost->hostt; 140 struct proc_dir_entry *p; 141 char name[10]; 142 143 if (!sht->proc_dir) 144 return; 145 146 sprintf(name,"%d", shost->host_no); 147 p = proc_create_data(name, S_IRUGO | S_IWUSR, 148 sht->proc_dir, &proc_scsi_fops, shost); 149 if (!p) 150 printk(KERN_ERR "%s: Failed to register host %d in" 151 "%s\n", __func__, shost->host_no, 152 sht->proc_name); 153 } 154 155 /** 156 * scsi_proc_host_rm - remove this host's entry from /proc 157 * @shost: which host 158 */ 159 void scsi_proc_host_rm(struct Scsi_Host *shost) 160 { 161 char name[10]; 162 163 if (!shost->hostt->proc_dir) 164 return; 165 166 sprintf(name,"%d", shost->host_no); 167 remove_proc_entry(name, shost->hostt->proc_dir); 168 } 169 /** 170 * proc_print_scsidevice - return data about this host 171 * @dev: A scsi device 172 * @data: &struct seq_file to output to. 173 * 174 * Description: prints Host, Channel, Id, Lun, Vendor, Model, Rev, Type, 175 * and revision. 176 */ 177 static int proc_print_scsidevice(struct device *dev, void *data) 178 { 179 struct scsi_device *sdev; 180 struct seq_file *s = data; 181 int i; 182 183 if (!scsi_is_sdev_device(dev)) 184 goto out; 185 186 sdev = to_scsi_device(dev); 187 seq_printf(s, 188 "Host: scsi%d Channel: %02d Id: %02d Lun: %02llu\n Vendor: ", 189 sdev->host->host_no, sdev->channel, sdev->id, sdev->lun); 190 for (i = 0; i < 8; i++) { 191 if (sdev->vendor[i] >= 0x20) 192 seq_putc(s, sdev->vendor[i]); 193 else 194 seq_putc(s, ' '); 195 } 196 197 seq_puts(s, " Model: "); 198 for (i = 0; i < 16; i++) { 199 if (sdev->model[i] >= 0x20) 200 seq_putc(s, sdev->model[i]); 201 else 202 seq_putc(s, ' '); 203 } 204 205 seq_puts(s, " Rev: "); 206 for (i = 0; i < 4; i++) { 207 if (sdev->rev[i] >= 0x20) 208 seq_putc(s, sdev->rev[i]); 209 else 210 seq_putc(s, ' '); 211 } 212 213 seq_putc(s, '\n'); 214 215 seq_printf(s, " Type: %s ", scsi_device_type(sdev->type)); 216 seq_printf(s, " ANSI SCSI revision: %02x", 217 sdev->scsi_level - (sdev->scsi_level > 1)); 218 if (sdev->scsi_level == 2) 219 seq_puts(s, " CCS\n"); 220 else 221 seq_putc(s, '\n'); 222 223 out: 224 return 0; 225 } 226 227 /** 228 * scsi_add_single_device - Respond to user request to probe for/add device 229 * @host: user-supplied decimal integer 230 * @channel: user-supplied decimal integer 231 * @id: user-supplied decimal integer 232 * @lun: user-supplied decimal integer 233 * 234 * Description: called by writing "scsi add-single-device" to /proc/scsi/scsi. 235 * 236 * does scsi_host_lookup() and either user_scan() if that transport 237 * type supports it, or else scsi_scan_host_selected() 238 * 239 * Note: this seems to be aimed exclusively at SCSI parallel busses. 240 */ 241 242 static int scsi_add_single_device(uint host, uint channel, uint id, uint lun) 243 { 244 struct Scsi_Host *shost; 245 int error = -ENXIO; 246 247 shost = scsi_host_lookup(host); 248 if (!shost) 249 return error; 250 251 if (shost->transportt->user_scan) 252 error = shost->transportt->user_scan(shost, channel, id, lun); 253 else 254 error = scsi_scan_host_selected(shost, channel, id, lun, 1); 255 scsi_host_put(shost); 256 return error; 257 } 258 259 /** 260 * scsi_remove_single_device - Respond to user request to remove a device 261 * @host: user-supplied decimal integer 262 * @channel: user-supplied decimal integer 263 * @id: user-supplied decimal integer 264 * @lun: user-supplied decimal integer 265 * 266 * Description: called by writing "scsi remove-single-device" to 267 * /proc/scsi/scsi. Does a scsi_device_lookup() and scsi_remove_device() 268 */ 269 static int scsi_remove_single_device(uint host, uint channel, uint id, uint lun) 270 { 271 struct scsi_device *sdev; 272 struct Scsi_Host *shost; 273 int error = -ENXIO; 274 275 shost = scsi_host_lookup(host); 276 if (!shost) 277 return error; 278 sdev = scsi_device_lookup(shost, channel, id, lun); 279 if (sdev) { 280 scsi_remove_device(sdev); 281 scsi_device_put(sdev); 282 error = 0; 283 } 284 285 scsi_host_put(shost); 286 return error; 287 } 288 289 /** 290 * proc_scsi_write - handle writes to /proc/scsi/scsi 291 * @file: not used 292 * @buf: buffer to write 293 * @length: length of buf, at most PAGE_SIZE 294 * @ppos: not used 295 * 296 * Description: this provides a legacy mechanism to add or remove devices by 297 * Host, Channel, ID, and Lun. To use, 298 * "echo 'scsi add-single-device 0 1 2 3' > /proc/scsi/scsi" or 299 * "echo 'scsi remove-single-device 0 1 2 3' > /proc/scsi/scsi" with 300 * "0 1 2 3" replaced by the Host, Channel, Id, and Lun. 301 * 302 * Note: this seems to be aimed at parallel SCSI. Most modern busses (USB, 303 * SATA, Firewire, Fibre Channel, etc) dynamically assign these values to 304 * provide a unique identifier and nothing more. 305 */ 306 307 308 static ssize_t proc_scsi_write(struct file *file, const char __user *buf, 309 size_t length, loff_t *ppos) 310 { 311 int host, channel, id, lun; 312 char *buffer, *p; 313 int err; 314 315 if (!buf || length > PAGE_SIZE) 316 return -EINVAL; 317 318 buffer = (char *)__get_free_page(GFP_KERNEL); 319 if (!buffer) 320 return -ENOMEM; 321 322 err = -EFAULT; 323 if (copy_from_user(buffer, buf, length)) 324 goto out; 325 326 err = -EINVAL; 327 if (length < PAGE_SIZE) 328 buffer[length] = '\0'; 329 else if (buffer[PAGE_SIZE-1]) 330 goto out; 331 332 /* 333 * Usage: echo "scsi add-single-device 0 1 2 3" >/proc/scsi/scsi 334 * with "0 1 2 3" replaced by your "Host Channel Id Lun". 335 */ 336 if (!strncmp("scsi add-single-device", buffer, 22)) { 337 p = buffer + 23; 338 339 host = simple_strtoul(p, &p, 0); 340 channel = simple_strtoul(p + 1, &p, 0); 341 id = simple_strtoul(p + 1, &p, 0); 342 lun = simple_strtoul(p + 1, &p, 0); 343 344 err = scsi_add_single_device(host, channel, id, lun); 345 346 /* 347 * Usage: echo "scsi remove-single-device 0 1 2 3" >/proc/scsi/scsi 348 * with "0 1 2 3" replaced by your "Host Channel Id Lun". 349 */ 350 } else if (!strncmp("scsi remove-single-device", buffer, 25)) { 351 p = buffer + 26; 352 353 host = simple_strtoul(p, &p, 0); 354 channel = simple_strtoul(p + 1, &p, 0); 355 id = simple_strtoul(p + 1, &p, 0); 356 lun = simple_strtoul(p + 1, &p, 0); 357 358 err = scsi_remove_single_device(host, channel, id, lun); 359 } 360 361 /* 362 * convert success returns so that we return the 363 * number of bytes consumed. 364 */ 365 if (!err) 366 err = length; 367 368 out: 369 free_page((unsigned long)buffer); 370 return err; 371 } 372 373 static int always_match(struct device *dev, void *data) 374 { 375 return 1; 376 } 377 378 static inline struct device *next_scsi_device(struct device *start) 379 { 380 struct device *next = bus_find_device(&scsi_bus_type, start, NULL, 381 always_match); 382 put_device(start); 383 return next; 384 } 385 386 static void *scsi_seq_start(struct seq_file *sfile, loff_t *pos) 387 { 388 struct device *dev = NULL; 389 loff_t n = *pos; 390 391 while ((dev = next_scsi_device(dev))) { 392 if (!n--) 393 break; 394 sfile->private++; 395 } 396 return dev; 397 } 398 399 static void *scsi_seq_next(struct seq_file *sfile, void *v, loff_t *pos) 400 { 401 (*pos)++; 402 sfile->private++; 403 return next_scsi_device(v); 404 } 405 406 static void scsi_seq_stop(struct seq_file *sfile, void *v) 407 { 408 put_device(v); 409 } 410 411 static int scsi_seq_show(struct seq_file *sfile, void *dev) 412 { 413 if (!sfile->private) 414 seq_puts(sfile, "Attached devices:\n"); 415 416 return proc_print_scsidevice(dev, sfile); 417 } 418 419 static const struct seq_operations scsi_seq_ops = { 420 .start = scsi_seq_start, 421 .next = scsi_seq_next, 422 .stop = scsi_seq_stop, 423 .show = scsi_seq_show 424 }; 425 426 /** 427 * proc_scsi_open - glue function 428 * @inode: not used 429 * @file: passed to single_open() 430 * 431 * Associates proc_scsi_show with this file 432 */ 433 static int proc_scsi_open(struct inode *inode, struct file *file) 434 { 435 /* 436 * We don't really need this for the write case but it doesn't 437 * harm either. 438 */ 439 return seq_open(file, &scsi_seq_ops); 440 } 441 442 static const struct file_operations proc_scsi_operations = { 443 .owner = THIS_MODULE, 444 .open = proc_scsi_open, 445 .read = seq_read, 446 .write = proc_scsi_write, 447 .llseek = seq_lseek, 448 .release = seq_release, 449 }; 450 451 /** 452 * scsi_init_procfs - create scsi and scsi/scsi in procfs 453 */ 454 int __init scsi_init_procfs(void) 455 { 456 struct proc_dir_entry *pde; 457 458 proc_scsi = proc_mkdir("scsi", NULL); 459 if (!proc_scsi) 460 goto err1; 461 462 pde = proc_create("scsi/scsi", 0, NULL, &proc_scsi_operations); 463 if (!pde) 464 goto err2; 465 466 return 0; 467 468 err2: 469 remove_proc_entry("scsi", NULL); 470 err1: 471 return -ENOMEM; 472 } 473 474 /** 475 * scsi_exit_procfs - Remove scsi/scsi and scsi from procfs 476 */ 477 void scsi_exit_procfs(void) 478 { 479 remove_proc_entry("scsi/scsi", NULL); 480 remove_proc_entry("scsi", NULL); 481 } 482