1 /* qlogicpti.c: Performance Technologies QlogicISP sbus card driver. 2 * 3 * Copyright (C) 1996, 2006, 2008 David S. Miller (davem@davemloft.net) 4 * 5 * A lot of this driver was directly stolen from Erik H. Moe's PCI 6 * Qlogic ISP driver. Mucho kudos to him for this code. 7 * 8 * An even bigger kudos to John Grana at Performance Technologies 9 * for providing me with the hardware to write this driver, you rule 10 * John you really do. 11 * 12 * May, 2, 1997: Added support for QLGC,isp --jj 13 */ 14 15 #include <linux/kernel.h> 16 #include <linux/delay.h> 17 #include <linux/types.h> 18 #include <linux/string.h> 19 #include <linux/gfp.h> 20 #include <linux/blkdev.h> 21 #include <linux/proc_fs.h> 22 #include <linux/stat.h> 23 #include <linux/init.h> 24 #include <linux/spinlock.h> 25 #include <linux/interrupt.h> 26 #include <linux/module.h> 27 #include <linux/jiffies.h> 28 #include <linux/dma-mapping.h> 29 #include <linux/of.h> 30 #include <linux/of_device.h> 31 #include <linux/firmware.h> 32 33 #include <asm/byteorder.h> 34 35 #include "qlogicpti.h" 36 37 #include <asm/dma.h> 38 #include <asm/ptrace.h> 39 #include <asm/pgtable.h> 40 #include <asm/oplib.h> 41 #include <asm/io.h> 42 #include <asm/irq.h> 43 44 #include <scsi/scsi.h> 45 #include <scsi/scsi_cmnd.h> 46 #include <scsi/scsi_device.h> 47 #include <scsi/scsi_eh.h> 48 #include <scsi/scsi_tcq.h> 49 #include <scsi/scsi_host.h> 50 51 #define MAX_TARGETS 16 52 #define MAX_LUNS 8 /* 32 for 1.31 F/W */ 53 54 #define DEFAULT_LOOP_COUNT 10000 55 56 static struct qlogicpti *qptichain = NULL; 57 static DEFINE_SPINLOCK(qptichain_lock); 58 59 #define PACKB(a, b) (((a)<<4)|(b)) 60 61 static const u_char mbox_param[] = { 62 PACKB(1, 1), /* MBOX_NO_OP */ 63 PACKB(5, 5), /* MBOX_LOAD_RAM */ 64 PACKB(2, 0), /* MBOX_EXEC_FIRMWARE */ 65 PACKB(5, 5), /* MBOX_DUMP_RAM */ 66 PACKB(3, 3), /* MBOX_WRITE_RAM_WORD */ 67 PACKB(2, 3), /* MBOX_READ_RAM_WORD */ 68 PACKB(6, 6), /* MBOX_MAILBOX_REG_TEST */ 69 PACKB(2, 3), /* MBOX_VERIFY_CHECKSUM */ 70 PACKB(1, 3), /* MBOX_ABOUT_FIRMWARE */ 71 PACKB(0, 0), /* 0x0009 */ 72 PACKB(0, 0), /* 0x000a */ 73 PACKB(0, 0), /* 0x000b */ 74 PACKB(0, 0), /* 0x000c */ 75 PACKB(0, 0), /* 0x000d */ 76 PACKB(1, 2), /* MBOX_CHECK_FIRMWARE */ 77 PACKB(0, 0), /* 0x000f */ 78 PACKB(5, 5), /* MBOX_INIT_REQ_QUEUE */ 79 PACKB(6, 6), /* MBOX_INIT_RES_QUEUE */ 80 PACKB(4, 4), /* MBOX_EXECUTE_IOCB */ 81 PACKB(2, 2), /* MBOX_WAKE_UP */ 82 PACKB(1, 6), /* MBOX_STOP_FIRMWARE */ 83 PACKB(4, 4), /* MBOX_ABORT */ 84 PACKB(2, 2), /* MBOX_ABORT_DEVICE */ 85 PACKB(3, 3), /* MBOX_ABORT_TARGET */ 86 PACKB(2, 2), /* MBOX_BUS_RESET */ 87 PACKB(2, 3), /* MBOX_STOP_QUEUE */ 88 PACKB(2, 3), /* MBOX_START_QUEUE */ 89 PACKB(2, 3), /* MBOX_SINGLE_STEP_QUEUE */ 90 PACKB(2, 3), /* MBOX_ABORT_QUEUE */ 91 PACKB(2, 4), /* MBOX_GET_DEV_QUEUE_STATUS */ 92 PACKB(0, 0), /* 0x001e */ 93 PACKB(1, 3), /* MBOX_GET_FIRMWARE_STATUS */ 94 PACKB(1, 2), /* MBOX_GET_INIT_SCSI_ID */ 95 PACKB(1, 2), /* MBOX_GET_SELECT_TIMEOUT */ 96 PACKB(1, 3), /* MBOX_GET_RETRY_COUNT */ 97 PACKB(1, 2), /* MBOX_GET_TAG_AGE_LIMIT */ 98 PACKB(1, 2), /* MBOX_GET_CLOCK_RATE */ 99 PACKB(1, 2), /* MBOX_GET_ACT_NEG_STATE */ 100 PACKB(1, 2), /* MBOX_GET_ASYNC_DATA_SETUP_TIME */ 101 PACKB(1, 3), /* MBOX_GET_SBUS_PARAMS */ 102 PACKB(2, 4), /* MBOX_GET_TARGET_PARAMS */ 103 PACKB(2, 4), /* MBOX_GET_DEV_QUEUE_PARAMS */ 104 PACKB(0, 0), /* 0x002a */ 105 PACKB(0, 0), /* 0x002b */ 106 PACKB(0, 0), /* 0x002c */ 107 PACKB(0, 0), /* 0x002d */ 108 PACKB(0, 0), /* 0x002e */ 109 PACKB(0, 0), /* 0x002f */ 110 PACKB(2, 2), /* MBOX_SET_INIT_SCSI_ID */ 111 PACKB(2, 2), /* MBOX_SET_SELECT_TIMEOUT */ 112 PACKB(3, 3), /* MBOX_SET_RETRY_COUNT */ 113 PACKB(2, 2), /* MBOX_SET_TAG_AGE_LIMIT */ 114 PACKB(2, 2), /* MBOX_SET_CLOCK_RATE */ 115 PACKB(2, 2), /* MBOX_SET_ACTIVE_NEG_STATE */ 116 PACKB(2, 2), /* MBOX_SET_ASYNC_DATA_SETUP_TIME */ 117 PACKB(3, 3), /* MBOX_SET_SBUS_CONTROL_PARAMS */ 118 PACKB(4, 4), /* MBOX_SET_TARGET_PARAMS */ 119 PACKB(4, 4), /* MBOX_SET_DEV_QUEUE_PARAMS */ 120 PACKB(0, 0), /* 0x003a */ 121 PACKB(0, 0), /* 0x003b */ 122 PACKB(0, 0), /* 0x003c */ 123 PACKB(0, 0), /* 0x003d */ 124 PACKB(0, 0), /* 0x003e */ 125 PACKB(0, 0), /* 0x003f */ 126 PACKB(0, 0), /* 0x0040 */ 127 PACKB(0, 0), /* 0x0041 */ 128 PACKB(0, 0) /* 0x0042 */ 129 }; 130 131 #define MAX_MBOX_COMMAND ARRAY_SIZE(mbox_param) 132 133 /* queue length's _must_ be power of two: */ 134 #define QUEUE_DEPTH(in, out, ql) ((in - out) & (ql)) 135 #define REQ_QUEUE_DEPTH(in, out) QUEUE_DEPTH(in, out, \ 136 QLOGICPTI_REQ_QUEUE_LEN) 137 #define RES_QUEUE_DEPTH(in, out) QUEUE_DEPTH(in, out, RES_QUEUE_LEN) 138 139 static inline void qlogicpti_enable_irqs(struct qlogicpti *qpti) 140 { 141 sbus_writew(SBUS_CTRL_ERIRQ | SBUS_CTRL_GENAB, 142 qpti->qregs + SBUS_CTRL); 143 } 144 145 static inline void qlogicpti_disable_irqs(struct qlogicpti *qpti) 146 { 147 sbus_writew(0, qpti->qregs + SBUS_CTRL); 148 } 149 150 static inline void set_sbus_cfg1(struct qlogicpti *qpti) 151 { 152 u16 val; 153 u8 bursts = qpti->bursts; 154 155 #if 0 /* It appears that at least PTI cards do not support 156 * 64-byte bursts and that setting the B64 bit actually 157 * is a nop and the chip ends up using the smallest burst 158 * size. -DaveM 159 */ 160 if (sbus_can_burst64() && (bursts & DMA_BURST64)) { 161 val = (SBUS_CFG1_BENAB | SBUS_CFG1_B64); 162 } else 163 #endif 164 if (bursts & DMA_BURST32) { 165 val = (SBUS_CFG1_BENAB | SBUS_CFG1_B32); 166 } else if (bursts & DMA_BURST16) { 167 val = (SBUS_CFG1_BENAB | SBUS_CFG1_B16); 168 } else if (bursts & DMA_BURST8) { 169 val = (SBUS_CFG1_BENAB | SBUS_CFG1_B8); 170 } else { 171 val = 0; /* No sbus bursts for you... */ 172 } 173 sbus_writew(val, qpti->qregs + SBUS_CFG1); 174 } 175 176 static int qlogicpti_mbox_command(struct qlogicpti *qpti, u_short param[], int force) 177 { 178 int loop_count; 179 u16 tmp; 180 181 if (mbox_param[param[0]] == 0) 182 return 1; 183 184 /* Set SBUS semaphore. */ 185 tmp = sbus_readw(qpti->qregs + SBUS_SEMAPHORE); 186 tmp |= SBUS_SEMAPHORE_LCK; 187 sbus_writew(tmp, qpti->qregs + SBUS_SEMAPHORE); 188 189 /* Wait for host IRQ bit to clear. */ 190 loop_count = DEFAULT_LOOP_COUNT; 191 while (--loop_count && (sbus_readw(qpti->qregs + HCCTRL) & HCCTRL_HIRQ)) { 192 barrier(); 193 cpu_relax(); 194 } 195 if (!loop_count) 196 printk(KERN_EMERG "qlogicpti%d: mbox_command loop timeout #1\n", 197 qpti->qpti_id); 198 199 /* Write mailbox command registers. */ 200 switch (mbox_param[param[0]] >> 4) { 201 case 6: sbus_writew(param[5], qpti->qregs + MBOX5); 202 case 5: sbus_writew(param[4], qpti->qregs + MBOX4); 203 case 4: sbus_writew(param[3], qpti->qregs + MBOX3); 204 case 3: sbus_writew(param[2], qpti->qregs + MBOX2); 205 case 2: sbus_writew(param[1], qpti->qregs + MBOX1); 206 case 1: sbus_writew(param[0], qpti->qregs + MBOX0); 207 } 208 209 /* Clear RISC interrupt. */ 210 tmp = sbus_readw(qpti->qregs + HCCTRL); 211 tmp |= HCCTRL_CRIRQ; 212 sbus_writew(tmp, qpti->qregs + HCCTRL); 213 214 /* Clear SBUS semaphore. */ 215 sbus_writew(0, qpti->qregs + SBUS_SEMAPHORE); 216 217 /* Set HOST interrupt. */ 218 tmp = sbus_readw(qpti->qregs + HCCTRL); 219 tmp |= HCCTRL_SHIRQ; 220 sbus_writew(tmp, qpti->qregs + HCCTRL); 221 222 /* Wait for HOST interrupt clears. */ 223 loop_count = DEFAULT_LOOP_COUNT; 224 while (--loop_count && 225 (sbus_readw(qpti->qregs + HCCTRL) & HCCTRL_CRIRQ)) 226 udelay(20); 227 if (!loop_count) 228 printk(KERN_EMERG "qlogicpti%d: mbox_command[%04x] loop timeout #2\n", 229 qpti->qpti_id, param[0]); 230 231 /* Wait for SBUS semaphore to get set. */ 232 loop_count = DEFAULT_LOOP_COUNT; 233 while (--loop_count && 234 !(sbus_readw(qpti->qregs + SBUS_SEMAPHORE) & SBUS_SEMAPHORE_LCK)) { 235 udelay(20); 236 237 /* Workaround for some buggy chips. */ 238 if (sbus_readw(qpti->qregs + MBOX0) & 0x4000) 239 break; 240 } 241 if (!loop_count) 242 printk(KERN_EMERG "qlogicpti%d: mbox_command[%04x] loop timeout #3\n", 243 qpti->qpti_id, param[0]); 244 245 /* Wait for MBOX busy condition to go away. */ 246 loop_count = DEFAULT_LOOP_COUNT; 247 while (--loop_count && (sbus_readw(qpti->qregs + MBOX0) == 0x04)) 248 udelay(20); 249 if (!loop_count) 250 printk(KERN_EMERG "qlogicpti%d: mbox_command[%04x] loop timeout #4\n", 251 qpti->qpti_id, param[0]); 252 253 /* Read back output parameters. */ 254 switch (mbox_param[param[0]] & 0xf) { 255 case 6: param[5] = sbus_readw(qpti->qregs + MBOX5); 256 case 5: param[4] = sbus_readw(qpti->qregs + MBOX4); 257 case 4: param[3] = sbus_readw(qpti->qregs + MBOX3); 258 case 3: param[2] = sbus_readw(qpti->qregs + MBOX2); 259 case 2: param[1] = sbus_readw(qpti->qregs + MBOX1); 260 case 1: param[0] = sbus_readw(qpti->qregs + MBOX0); 261 } 262 263 /* Clear RISC interrupt. */ 264 tmp = sbus_readw(qpti->qregs + HCCTRL); 265 tmp |= HCCTRL_CRIRQ; 266 sbus_writew(tmp, qpti->qregs + HCCTRL); 267 268 /* Release SBUS semaphore. */ 269 tmp = sbus_readw(qpti->qregs + SBUS_SEMAPHORE); 270 tmp &= ~(SBUS_SEMAPHORE_LCK); 271 sbus_writew(tmp, qpti->qregs + SBUS_SEMAPHORE); 272 273 /* We're done. */ 274 return 0; 275 } 276 277 static inline void qlogicpti_set_hostdev_defaults(struct qlogicpti *qpti) 278 { 279 int i; 280 281 qpti->host_param.initiator_scsi_id = qpti->scsi_id; 282 qpti->host_param.bus_reset_delay = 3; 283 qpti->host_param.retry_count = 0; 284 qpti->host_param.retry_delay = 5; 285 qpti->host_param.async_data_setup_time = 3; 286 qpti->host_param.req_ack_active_negation = 1; 287 qpti->host_param.data_line_active_negation = 1; 288 qpti->host_param.data_dma_burst_enable = 1; 289 qpti->host_param.command_dma_burst_enable = 1; 290 qpti->host_param.tag_aging = 8; 291 qpti->host_param.selection_timeout = 250; 292 qpti->host_param.max_queue_depth = 256; 293 294 for(i = 0; i < MAX_TARGETS; i++) { 295 /* 296 * disconnect, parity, arq, reneg on reset, and, oddly enough 297 * tags...the midlayer's notion of tagged support has to match 298 * our device settings, and since we base whether we enable a 299 * tag on a per-cmnd basis upon what the midlayer sez, we 300 * actually enable the capability here. 301 */ 302 qpti->dev_param[i].device_flags = 0xcd; 303 qpti->dev_param[i].execution_throttle = 16; 304 if (qpti->ultra) { 305 qpti->dev_param[i].synchronous_period = 12; 306 qpti->dev_param[i].synchronous_offset = 8; 307 } else { 308 qpti->dev_param[i].synchronous_period = 25; 309 qpti->dev_param[i].synchronous_offset = 12; 310 } 311 qpti->dev_param[i].device_enable = 1; 312 } 313 } 314 315 static int qlogicpti_reset_hardware(struct Scsi_Host *host) 316 { 317 struct qlogicpti *qpti = (struct qlogicpti *) host->hostdata; 318 u_short param[6]; 319 unsigned short risc_code_addr; 320 int loop_count, i; 321 unsigned long flags; 322 323 risc_code_addr = 0x1000; /* all load addresses are at 0x1000 */ 324 325 spin_lock_irqsave(host->host_lock, flags); 326 327 sbus_writew(HCCTRL_PAUSE, qpti->qregs + HCCTRL); 328 329 /* Only reset the scsi bus if it is not free. */ 330 if (sbus_readw(qpti->qregs + CPU_PCTRL) & CPU_PCTRL_BSY) { 331 sbus_writew(CPU_ORIDE_RMOD, qpti->qregs + CPU_ORIDE); 332 sbus_writew(CPU_CMD_BRESET, qpti->qregs + CPU_CMD); 333 udelay(400); 334 } 335 336 sbus_writew(SBUS_CTRL_RESET, qpti->qregs + SBUS_CTRL); 337 sbus_writew((DMA_CTRL_CCLEAR | DMA_CTRL_CIRQ), qpti->qregs + CMD_DMA_CTRL); 338 sbus_writew((DMA_CTRL_CCLEAR | DMA_CTRL_CIRQ), qpti->qregs + DATA_DMA_CTRL); 339 340 loop_count = DEFAULT_LOOP_COUNT; 341 while (--loop_count && ((sbus_readw(qpti->qregs + MBOX0) & 0xff) == 0x04)) 342 udelay(20); 343 if (!loop_count) 344 printk(KERN_EMERG "qlogicpti%d: reset_hardware loop timeout\n", 345 qpti->qpti_id); 346 347 sbus_writew(HCCTRL_PAUSE, qpti->qregs + HCCTRL); 348 set_sbus_cfg1(qpti); 349 qlogicpti_enable_irqs(qpti); 350 351 if (sbus_readw(qpti->qregs + RISC_PSR) & RISC_PSR_ULTRA) { 352 qpti->ultra = 1; 353 sbus_writew((RISC_MTREG_P0ULTRA | RISC_MTREG_P1ULTRA), 354 qpti->qregs + RISC_MTREG); 355 } else { 356 qpti->ultra = 0; 357 sbus_writew((RISC_MTREG_P0DFLT | RISC_MTREG_P1DFLT), 358 qpti->qregs + RISC_MTREG); 359 } 360 361 /* reset adapter and per-device default values. */ 362 /* do it after finding out whether we're ultra mode capable */ 363 qlogicpti_set_hostdev_defaults(qpti); 364 365 /* Release the RISC processor. */ 366 sbus_writew(HCCTRL_REL, qpti->qregs + HCCTRL); 367 368 /* Get RISC to start executing the firmware code. */ 369 param[0] = MBOX_EXEC_FIRMWARE; 370 param[1] = risc_code_addr; 371 if (qlogicpti_mbox_command(qpti, param, 1)) { 372 printk(KERN_EMERG "qlogicpti%d: Cannot execute ISP firmware.\n", 373 qpti->qpti_id); 374 spin_unlock_irqrestore(host->host_lock, flags); 375 return 1; 376 } 377 378 /* Set initiator scsi ID. */ 379 param[0] = MBOX_SET_INIT_SCSI_ID; 380 param[1] = qpti->host_param.initiator_scsi_id; 381 if (qlogicpti_mbox_command(qpti, param, 1) || 382 (param[0] != MBOX_COMMAND_COMPLETE)) { 383 printk(KERN_EMERG "qlogicpti%d: Cannot set initiator SCSI ID.\n", 384 qpti->qpti_id); 385 spin_unlock_irqrestore(host->host_lock, flags); 386 return 1; 387 } 388 389 /* Initialize state of the queues, both hw and sw. */ 390 qpti->req_in_ptr = qpti->res_out_ptr = 0; 391 392 param[0] = MBOX_INIT_RES_QUEUE; 393 param[1] = RES_QUEUE_LEN + 1; 394 param[2] = (u_short) (qpti->res_dvma >> 16); 395 param[3] = (u_short) (qpti->res_dvma & 0xffff); 396 param[4] = param[5] = 0; 397 if (qlogicpti_mbox_command(qpti, param, 1)) { 398 printk(KERN_EMERG "qlogicpti%d: Cannot init response queue.\n", 399 qpti->qpti_id); 400 spin_unlock_irqrestore(host->host_lock, flags); 401 return 1; 402 } 403 404 param[0] = MBOX_INIT_REQ_QUEUE; 405 param[1] = QLOGICPTI_REQ_QUEUE_LEN + 1; 406 param[2] = (u_short) (qpti->req_dvma >> 16); 407 param[3] = (u_short) (qpti->req_dvma & 0xffff); 408 param[4] = param[5] = 0; 409 if (qlogicpti_mbox_command(qpti, param, 1)) { 410 printk(KERN_EMERG "qlogicpti%d: Cannot init request queue.\n", 411 qpti->qpti_id); 412 spin_unlock_irqrestore(host->host_lock, flags); 413 return 1; 414 } 415 416 param[0] = MBOX_SET_RETRY_COUNT; 417 param[1] = qpti->host_param.retry_count; 418 param[2] = qpti->host_param.retry_delay; 419 qlogicpti_mbox_command(qpti, param, 0); 420 421 param[0] = MBOX_SET_TAG_AGE_LIMIT; 422 param[1] = qpti->host_param.tag_aging; 423 qlogicpti_mbox_command(qpti, param, 0); 424 425 for (i = 0; i < MAX_TARGETS; i++) { 426 param[0] = MBOX_GET_DEV_QUEUE_PARAMS; 427 param[1] = (i << 8); 428 qlogicpti_mbox_command(qpti, param, 0); 429 } 430 431 param[0] = MBOX_GET_FIRMWARE_STATUS; 432 qlogicpti_mbox_command(qpti, param, 0); 433 434 param[0] = MBOX_SET_SELECT_TIMEOUT; 435 param[1] = qpti->host_param.selection_timeout; 436 qlogicpti_mbox_command(qpti, param, 0); 437 438 for (i = 0; i < MAX_TARGETS; i++) { 439 param[0] = MBOX_SET_TARGET_PARAMS; 440 param[1] = (i << 8); 441 param[2] = (qpti->dev_param[i].device_flags << 8); 442 /* 443 * Since we're now loading 1.31 f/w, force narrow/async. 444 */ 445 param[2] |= 0xc0; 446 param[3] = 0; /* no offset, we do not have sync mode yet */ 447 qlogicpti_mbox_command(qpti, param, 0); 448 } 449 450 /* 451 * Always (sigh) do an initial bus reset (kicks f/w). 452 */ 453 param[0] = MBOX_BUS_RESET; 454 param[1] = qpti->host_param.bus_reset_delay; 455 qlogicpti_mbox_command(qpti, param, 0); 456 qpti->send_marker = 1; 457 458 spin_unlock_irqrestore(host->host_lock, flags); 459 return 0; 460 } 461 462 #define PTI_RESET_LIMIT 400 463 464 static int qlogicpti_load_firmware(struct qlogicpti *qpti) 465 { 466 const struct firmware *fw; 467 const char fwname[] = "qlogic/isp1000.bin"; 468 const __le16 *fw_data; 469 struct Scsi_Host *host = qpti->qhost; 470 unsigned short csum = 0; 471 unsigned short param[6]; 472 unsigned short risc_code_addr, risc_code_length; 473 int err; 474 unsigned long flags; 475 int i, timeout; 476 477 err = request_firmware(&fw, fwname, &qpti->op->dev); 478 if (err) { 479 printk(KERN_ERR "Failed to load image \"%s\" err %d\n", 480 fwname, err); 481 return err; 482 } 483 if (fw->size % 2) { 484 printk(KERN_ERR "Bogus length %zu in image \"%s\"\n", 485 fw->size, fwname); 486 err = -EINVAL; 487 goto outfirm; 488 } 489 fw_data = (const __le16 *)&fw->data[0]; 490 risc_code_addr = 0x1000; /* all f/w modules load at 0x1000 */ 491 risc_code_length = fw->size / 2; 492 493 spin_lock_irqsave(host->host_lock, flags); 494 495 /* Verify the checksum twice, one before loading it, and once 496 * afterwards via the mailbox commands. 497 */ 498 for (i = 0; i < risc_code_length; i++) 499 csum += __le16_to_cpu(fw_data[i]); 500 if (csum) { 501 printk(KERN_EMERG "qlogicpti%d: Aieee, firmware checksum failed!", 502 qpti->qpti_id); 503 err = 1; 504 goto out; 505 } 506 sbus_writew(SBUS_CTRL_RESET, qpti->qregs + SBUS_CTRL); 507 sbus_writew((DMA_CTRL_CCLEAR | DMA_CTRL_CIRQ), qpti->qregs + CMD_DMA_CTRL); 508 sbus_writew((DMA_CTRL_CCLEAR | DMA_CTRL_CIRQ), qpti->qregs + DATA_DMA_CTRL); 509 timeout = PTI_RESET_LIMIT; 510 while (--timeout && (sbus_readw(qpti->qregs + SBUS_CTRL) & SBUS_CTRL_RESET)) 511 udelay(20); 512 if (!timeout) { 513 printk(KERN_EMERG "qlogicpti%d: Cannot reset the ISP.", qpti->qpti_id); 514 err = 1; 515 goto out; 516 } 517 518 sbus_writew(HCCTRL_RESET, qpti->qregs + HCCTRL); 519 mdelay(1); 520 521 sbus_writew((SBUS_CTRL_GENAB | SBUS_CTRL_ERIRQ), qpti->qregs + SBUS_CTRL); 522 set_sbus_cfg1(qpti); 523 sbus_writew(0, qpti->qregs + SBUS_SEMAPHORE); 524 525 if (sbus_readw(qpti->qregs + RISC_PSR) & RISC_PSR_ULTRA) { 526 qpti->ultra = 1; 527 sbus_writew((RISC_MTREG_P0ULTRA | RISC_MTREG_P1ULTRA), 528 qpti->qregs + RISC_MTREG); 529 } else { 530 qpti->ultra = 0; 531 sbus_writew((RISC_MTREG_P0DFLT | RISC_MTREG_P1DFLT), 532 qpti->qregs + RISC_MTREG); 533 } 534 535 sbus_writew(HCCTRL_REL, qpti->qregs + HCCTRL); 536 537 /* Pin lines are only stable while RISC is paused. */ 538 sbus_writew(HCCTRL_PAUSE, qpti->qregs + HCCTRL); 539 if (sbus_readw(qpti->qregs + CPU_PDIFF) & CPU_PDIFF_MODE) 540 qpti->differential = 1; 541 else 542 qpti->differential = 0; 543 sbus_writew(HCCTRL_REL, qpti->qregs + HCCTRL); 544 545 /* This shouldn't be necessary- we've reset things so we should be 546 running from the ROM now.. */ 547 548 param[0] = MBOX_STOP_FIRMWARE; 549 param[1] = param[2] = param[3] = param[4] = param[5] = 0; 550 if (qlogicpti_mbox_command(qpti, param, 1)) { 551 printk(KERN_EMERG "qlogicpti%d: Cannot stop firmware for reload.\n", 552 qpti->qpti_id); 553 err = 1; 554 goto out; 555 } 556 557 /* Load it up.. */ 558 for (i = 0; i < risc_code_length; i++) { 559 param[0] = MBOX_WRITE_RAM_WORD; 560 param[1] = risc_code_addr + i; 561 param[2] = __le16_to_cpu(fw_data[i]); 562 if (qlogicpti_mbox_command(qpti, param, 1) || 563 param[0] != MBOX_COMMAND_COMPLETE) { 564 printk("qlogicpti%d: Firmware dload failed, I'm bolixed!\n", 565 qpti->qpti_id); 566 err = 1; 567 goto out; 568 } 569 } 570 571 /* Reset the ISP again. */ 572 sbus_writew(HCCTRL_RESET, qpti->qregs + HCCTRL); 573 mdelay(1); 574 575 qlogicpti_enable_irqs(qpti); 576 sbus_writew(0, qpti->qregs + SBUS_SEMAPHORE); 577 sbus_writew(HCCTRL_REL, qpti->qregs + HCCTRL); 578 579 /* Ask ISP to verify the checksum of the new code. */ 580 param[0] = MBOX_VERIFY_CHECKSUM; 581 param[1] = risc_code_addr; 582 if (qlogicpti_mbox_command(qpti, param, 1) || 583 (param[0] != MBOX_COMMAND_COMPLETE)) { 584 printk(KERN_EMERG "qlogicpti%d: New firmware csum failure!\n", 585 qpti->qpti_id); 586 err = 1; 587 goto out; 588 } 589 590 /* Start using newly downloaded firmware. */ 591 param[0] = MBOX_EXEC_FIRMWARE; 592 param[1] = risc_code_addr; 593 qlogicpti_mbox_command(qpti, param, 1); 594 595 param[0] = MBOX_ABOUT_FIRMWARE; 596 if (qlogicpti_mbox_command(qpti, param, 1) || 597 (param[0] != MBOX_COMMAND_COMPLETE)) { 598 printk(KERN_EMERG "qlogicpti%d: AboutFirmware cmd fails.\n", 599 qpti->qpti_id); 600 err = 1; 601 goto out; 602 } 603 604 /* Snag the major and minor revisions from the result. */ 605 qpti->fware_majrev = param[1]; 606 qpti->fware_minrev = param[2]; 607 qpti->fware_micrev = param[3]; 608 609 /* Set the clock rate */ 610 param[0] = MBOX_SET_CLOCK_RATE; 611 param[1] = qpti->clock; 612 if (qlogicpti_mbox_command(qpti, param, 1) || 613 (param[0] != MBOX_COMMAND_COMPLETE)) { 614 printk(KERN_EMERG "qlogicpti%d: could not set clock rate.\n", 615 qpti->qpti_id); 616 err = 1; 617 goto out; 618 } 619 620 if (qpti->is_pti != 0) { 621 /* Load scsi initiator ID and interrupt level into sbus static ram. */ 622 param[0] = MBOX_WRITE_RAM_WORD; 623 param[1] = 0xff80; 624 param[2] = (unsigned short) qpti->scsi_id; 625 qlogicpti_mbox_command(qpti, param, 1); 626 627 param[0] = MBOX_WRITE_RAM_WORD; 628 param[1] = 0xff00; 629 param[2] = (unsigned short) 3; 630 qlogicpti_mbox_command(qpti, param, 1); 631 } 632 633 out: 634 spin_unlock_irqrestore(host->host_lock, flags); 635 outfirm: 636 release_firmware(fw); 637 return err; 638 } 639 640 static int qlogicpti_verify_tmon(struct qlogicpti *qpti) 641 { 642 int curstat = sbus_readb(qpti->sreg); 643 644 curstat &= 0xf0; 645 if (!(curstat & SREG_FUSE) && (qpti->swsreg & SREG_FUSE)) 646 printk("qlogicpti%d: Fuse returned to normal state.\n", qpti->qpti_id); 647 if (!(curstat & SREG_TPOWER) && (qpti->swsreg & SREG_TPOWER)) 648 printk("qlogicpti%d: termpwr back to normal state.\n", qpti->qpti_id); 649 if (curstat != qpti->swsreg) { 650 int error = 0; 651 if (curstat & SREG_FUSE) { 652 error++; 653 printk("qlogicpti%d: Fuse is open!\n", qpti->qpti_id); 654 } 655 if (curstat & SREG_TPOWER) { 656 error++; 657 printk("qlogicpti%d: termpwr failure\n", qpti->qpti_id); 658 } 659 if (qpti->differential && 660 (curstat & SREG_DSENSE) != SREG_DSENSE) { 661 error++; 662 printk("qlogicpti%d: You have a single ended device on a " 663 "differential bus! Please fix!\n", qpti->qpti_id); 664 } 665 qpti->swsreg = curstat; 666 return error; 667 } 668 return 0; 669 } 670 671 static irqreturn_t qpti_intr(int irq, void *dev_id); 672 673 static void qpti_chain_add(struct qlogicpti *qpti) 674 { 675 spin_lock_irq(&qptichain_lock); 676 if (qptichain != NULL) { 677 struct qlogicpti *qlink = qptichain; 678 679 while(qlink->next) 680 qlink = qlink->next; 681 qlink->next = qpti; 682 } else { 683 qptichain = qpti; 684 } 685 qpti->next = NULL; 686 spin_unlock_irq(&qptichain_lock); 687 } 688 689 static void qpti_chain_del(struct qlogicpti *qpti) 690 { 691 spin_lock_irq(&qptichain_lock); 692 if (qptichain == qpti) { 693 qptichain = qpti->next; 694 } else { 695 struct qlogicpti *qlink = qptichain; 696 while(qlink->next != qpti) 697 qlink = qlink->next; 698 qlink->next = qpti->next; 699 } 700 qpti->next = NULL; 701 spin_unlock_irq(&qptichain_lock); 702 } 703 704 static int qpti_map_regs(struct qlogicpti *qpti) 705 { 706 struct platform_device *op = qpti->op; 707 708 qpti->qregs = of_ioremap(&op->resource[0], 0, 709 resource_size(&op->resource[0]), 710 "PTI Qlogic/ISP"); 711 if (!qpti->qregs) { 712 printk("PTI: Qlogic/ISP registers are unmappable\n"); 713 return -ENODEV; 714 } 715 if (qpti->is_pti) { 716 qpti->sreg = of_ioremap(&op->resource[0], (16 * 4096), 717 sizeof(unsigned char), 718 "PTI Qlogic/ISP statreg"); 719 if (!qpti->sreg) { 720 printk("PTI: Qlogic/ISP status register is unmappable\n"); 721 return -ENODEV; 722 } 723 } 724 return 0; 725 } 726 727 static int qpti_register_irq(struct qlogicpti *qpti) 728 { 729 struct platform_device *op = qpti->op; 730 731 qpti->qhost->irq = qpti->irq = op->archdata.irqs[0]; 732 733 /* We used to try various overly-clever things to 734 * reduce the interrupt processing overhead on 735 * sun4c/sun4m when multiple PTI's shared the 736 * same IRQ. It was too complex and messy to 737 * sanely maintain. 738 */ 739 if (request_irq(qpti->irq, qpti_intr, 740 IRQF_SHARED, "QlogicPTI", qpti)) 741 goto fail; 742 743 printk("qlogicpti%d: IRQ %d ", qpti->qpti_id, qpti->irq); 744 745 return 0; 746 747 fail: 748 printk("qlogicpti%d: Cannot acquire irq line\n", qpti->qpti_id); 749 return -1; 750 } 751 752 static void qpti_get_scsi_id(struct qlogicpti *qpti) 753 { 754 struct platform_device *op = qpti->op; 755 struct device_node *dp; 756 757 dp = op->dev.of_node; 758 759 qpti->scsi_id = of_getintprop_default(dp, "initiator-id", -1); 760 if (qpti->scsi_id == -1) 761 qpti->scsi_id = of_getintprop_default(dp, "scsi-initiator-id", 762 -1); 763 if (qpti->scsi_id == -1) 764 qpti->scsi_id = 765 of_getintprop_default(dp->parent, 766 "scsi-initiator-id", 7); 767 qpti->qhost->this_id = qpti->scsi_id; 768 qpti->qhost->max_sectors = 64; 769 770 printk("SCSI ID %d ", qpti->scsi_id); 771 } 772 773 static void qpti_get_bursts(struct qlogicpti *qpti) 774 { 775 struct platform_device *op = qpti->op; 776 u8 bursts, bmask; 777 778 bursts = of_getintprop_default(op->dev.of_node, "burst-sizes", 0xff); 779 bmask = of_getintprop_default(op->dev.of_node->parent, "burst-sizes", 0xff); 780 if (bmask != 0xff) 781 bursts &= bmask; 782 if (bursts == 0xff || 783 (bursts & DMA_BURST16) == 0 || 784 (bursts & DMA_BURST32) == 0) 785 bursts = (DMA_BURST32 - 1); 786 787 qpti->bursts = bursts; 788 } 789 790 static void qpti_get_clock(struct qlogicpti *qpti) 791 { 792 unsigned int cfreq; 793 794 /* Check for what the clock input to this card is. 795 * Default to 40Mhz. 796 */ 797 cfreq = prom_getintdefault(qpti->prom_node,"clock-frequency",40000000); 798 qpti->clock = (cfreq + 500000)/1000000; 799 if (qpti->clock == 0) /* bullshit */ 800 qpti->clock = 40; 801 } 802 803 /* The request and response queues must each be aligned 804 * on a page boundary. 805 */ 806 static int qpti_map_queues(struct qlogicpti *qpti) 807 { 808 struct platform_device *op = qpti->op; 809 810 #define QSIZE(entries) (((entries) + 1) * QUEUE_ENTRY_LEN) 811 qpti->res_cpu = dma_alloc_coherent(&op->dev, 812 QSIZE(RES_QUEUE_LEN), 813 &qpti->res_dvma, GFP_ATOMIC); 814 if (qpti->res_cpu == NULL || 815 qpti->res_dvma == 0) { 816 printk("QPTI: Cannot map response queue.\n"); 817 return -1; 818 } 819 820 qpti->req_cpu = dma_alloc_coherent(&op->dev, 821 QSIZE(QLOGICPTI_REQ_QUEUE_LEN), 822 &qpti->req_dvma, GFP_ATOMIC); 823 if (qpti->req_cpu == NULL || 824 qpti->req_dvma == 0) { 825 dma_free_coherent(&op->dev, QSIZE(RES_QUEUE_LEN), 826 qpti->res_cpu, qpti->res_dvma); 827 printk("QPTI: Cannot map request queue.\n"); 828 return -1; 829 } 830 memset(qpti->res_cpu, 0, QSIZE(RES_QUEUE_LEN)); 831 memset(qpti->req_cpu, 0, QSIZE(QLOGICPTI_REQ_QUEUE_LEN)); 832 return 0; 833 } 834 835 const char *qlogicpti_info(struct Scsi_Host *host) 836 { 837 static char buf[80]; 838 struct qlogicpti *qpti = (struct qlogicpti *) host->hostdata; 839 840 sprintf(buf, "PTI Qlogic,ISP SBUS SCSI irq %d regs at %p", 841 qpti->qhost->irq, qpti->qregs); 842 return buf; 843 } 844 845 /* I am a certified frobtronicist. */ 846 static inline void marker_frob(struct Command_Entry *cmd) 847 { 848 struct Marker_Entry *marker = (struct Marker_Entry *) cmd; 849 850 memset(marker, 0, sizeof(struct Marker_Entry)); 851 marker->hdr.entry_cnt = 1; 852 marker->hdr.entry_type = ENTRY_MARKER; 853 marker->modifier = SYNC_ALL; 854 marker->rsvd = 0; 855 } 856 857 static inline void cmd_frob(struct Command_Entry *cmd, struct scsi_cmnd *Cmnd, 858 struct qlogicpti *qpti) 859 { 860 memset(cmd, 0, sizeof(struct Command_Entry)); 861 cmd->hdr.entry_cnt = 1; 862 cmd->hdr.entry_type = ENTRY_COMMAND; 863 cmd->target_id = Cmnd->device->id; 864 cmd->target_lun = Cmnd->device->lun; 865 cmd->cdb_length = Cmnd->cmd_len; 866 cmd->control_flags = 0; 867 if (Cmnd->device->tagged_supported) { 868 if (qpti->cmd_count[Cmnd->device->id] == 0) 869 qpti->tag_ages[Cmnd->device->id] = jiffies; 870 if (time_after(jiffies, qpti->tag_ages[Cmnd->device->id] + (5*HZ))) { 871 cmd->control_flags = CFLAG_ORDERED_TAG; 872 qpti->tag_ages[Cmnd->device->id] = jiffies; 873 } else 874 cmd->control_flags = CFLAG_SIMPLE_TAG; 875 } 876 if ((Cmnd->cmnd[0] == WRITE_6) || 877 (Cmnd->cmnd[0] == WRITE_10) || 878 (Cmnd->cmnd[0] == WRITE_12)) 879 cmd->control_flags |= CFLAG_WRITE; 880 else 881 cmd->control_flags |= CFLAG_READ; 882 cmd->time_out = Cmnd->request->timeout/HZ; 883 memcpy(cmd->cdb, Cmnd->cmnd, Cmnd->cmd_len); 884 } 885 886 /* Do it to it baby. */ 887 static inline int load_cmd(struct scsi_cmnd *Cmnd, struct Command_Entry *cmd, 888 struct qlogicpti *qpti, u_int in_ptr, u_int out_ptr) 889 { 890 struct dataseg *ds; 891 struct scatterlist *sg, *s; 892 int i, n; 893 894 if (scsi_bufflen(Cmnd)) { 895 int sg_count; 896 897 sg = scsi_sglist(Cmnd); 898 sg_count = dma_map_sg(&qpti->op->dev, sg, 899 scsi_sg_count(Cmnd), 900 Cmnd->sc_data_direction); 901 902 ds = cmd->dataseg; 903 cmd->segment_cnt = sg_count; 904 905 /* Fill in first four sg entries: */ 906 n = sg_count; 907 if (n > 4) 908 n = 4; 909 for_each_sg(sg, s, n, i) { 910 ds[i].d_base = sg_dma_address(s); 911 ds[i].d_count = sg_dma_len(s); 912 } 913 sg_count -= 4; 914 sg = s; 915 while (sg_count > 0) { 916 struct Continuation_Entry *cont; 917 918 ++cmd->hdr.entry_cnt; 919 cont = (struct Continuation_Entry *) &qpti->req_cpu[in_ptr]; 920 in_ptr = NEXT_REQ_PTR(in_ptr); 921 if (in_ptr == out_ptr) 922 return -1; 923 924 cont->hdr.entry_type = ENTRY_CONTINUATION; 925 cont->hdr.entry_cnt = 0; 926 cont->hdr.sys_def_1 = 0; 927 cont->hdr.flags = 0; 928 cont->reserved = 0; 929 ds = cont->dataseg; 930 n = sg_count; 931 if (n > 7) 932 n = 7; 933 for_each_sg(sg, s, n, i) { 934 ds[i].d_base = sg_dma_address(s); 935 ds[i].d_count = sg_dma_len(s); 936 } 937 sg_count -= n; 938 sg = s; 939 } 940 } else { 941 cmd->dataseg[0].d_base = 0; 942 cmd->dataseg[0].d_count = 0; 943 cmd->segment_cnt = 1; /* Shouldn't this be 0? */ 944 } 945 946 /* Committed, record Scsi_Cmd so we can find it later. */ 947 cmd->handle = in_ptr; 948 qpti->cmd_slots[in_ptr] = Cmnd; 949 950 qpti->cmd_count[Cmnd->device->id]++; 951 sbus_writew(in_ptr, qpti->qregs + MBOX4); 952 qpti->req_in_ptr = in_ptr; 953 954 return in_ptr; 955 } 956 957 static inline void update_can_queue(struct Scsi_Host *host, u_int in_ptr, u_int out_ptr) 958 { 959 /* Temporary workaround until bug is found and fixed (one bug has been found 960 already, but fixing it makes things even worse) -jj */ 961 int num_free = QLOGICPTI_REQ_QUEUE_LEN - REQ_QUEUE_DEPTH(in_ptr, out_ptr) - 64; 962 host->can_queue = atomic_read(&host->host_busy) + num_free; 963 host->sg_tablesize = QLOGICPTI_MAX_SG(num_free); 964 } 965 966 static int qlogicpti_slave_configure(struct scsi_device *sdev) 967 { 968 struct qlogicpti *qpti = shost_priv(sdev->host); 969 int tgt = sdev->id; 970 u_short param[6]; 971 972 /* tags handled in midlayer */ 973 /* enable sync mode? */ 974 if (sdev->sdtr) { 975 qpti->dev_param[tgt].device_flags |= 0x10; 976 } else { 977 qpti->dev_param[tgt].synchronous_offset = 0; 978 qpti->dev_param[tgt].synchronous_period = 0; 979 } 980 /* are we wide capable? */ 981 if (sdev->wdtr) 982 qpti->dev_param[tgt].device_flags |= 0x20; 983 984 param[0] = MBOX_SET_TARGET_PARAMS; 985 param[1] = (tgt << 8); 986 param[2] = (qpti->dev_param[tgt].device_flags << 8); 987 if (qpti->dev_param[tgt].device_flags & 0x10) { 988 param[3] = (qpti->dev_param[tgt].synchronous_offset << 8) | 989 qpti->dev_param[tgt].synchronous_period; 990 } else { 991 param[3] = 0; 992 } 993 qlogicpti_mbox_command(qpti, param, 0); 994 return 0; 995 } 996 997 /* 998 * The middle SCSI layer ensures that queuecommand never gets invoked 999 * concurrently with itself or the interrupt handler (though the 1000 * interrupt handler may call this routine as part of 1001 * request-completion handling). 1002 * 1003 * "This code must fly." -davem 1004 */ 1005 static int qlogicpti_queuecommand_lck(struct scsi_cmnd *Cmnd, void (*done)(struct scsi_cmnd *)) 1006 { 1007 struct Scsi_Host *host = Cmnd->device->host; 1008 struct qlogicpti *qpti = (struct qlogicpti *) host->hostdata; 1009 struct Command_Entry *cmd; 1010 u_int out_ptr; 1011 int in_ptr; 1012 1013 Cmnd->scsi_done = done; 1014 1015 in_ptr = qpti->req_in_ptr; 1016 cmd = (struct Command_Entry *) &qpti->req_cpu[in_ptr]; 1017 out_ptr = sbus_readw(qpti->qregs + MBOX4); 1018 in_ptr = NEXT_REQ_PTR(in_ptr); 1019 if (in_ptr == out_ptr) 1020 goto toss_command; 1021 1022 if (qpti->send_marker) { 1023 marker_frob(cmd); 1024 qpti->send_marker = 0; 1025 if (NEXT_REQ_PTR(in_ptr) == out_ptr) { 1026 sbus_writew(in_ptr, qpti->qregs + MBOX4); 1027 qpti->req_in_ptr = in_ptr; 1028 goto toss_command; 1029 } 1030 cmd = (struct Command_Entry *) &qpti->req_cpu[in_ptr]; 1031 in_ptr = NEXT_REQ_PTR(in_ptr); 1032 } 1033 cmd_frob(cmd, Cmnd, qpti); 1034 if ((in_ptr = load_cmd(Cmnd, cmd, qpti, in_ptr, out_ptr)) == -1) 1035 goto toss_command; 1036 1037 update_can_queue(host, in_ptr, out_ptr); 1038 1039 return 0; 1040 1041 toss_command: 1042 printk(KERN_EMERG "qlogicpti%d: request queue overflow\n", 1043 qpti->qpti_id); 1044 1045 /* Unfortunately, unless you use the new EH code, which 1046 * we don't, the midlayer will ignore the return value, 1047 * which is insane. We pick up the pieces like this. 1048 */ 1049 Cmnd->result = DID_BUS_BUSY; 1050 done(Cmnd); 1051 return 1; 1052 } 1053 1054 static DEF_SCSI_QCMD(qlogicpti_queuecommand) 1055 1056 static int qlogicpti_return_status(struct Status_Entry *sts, int id) 1057 { 1058 int host_status = DID_ERROR; 1059 1060 switch (sts->completion_status) { 1061 case CS_COMPLETE: 1062 host_status = DID_OK; 1063 break; 1064 case CS_INCOMPLETE: 1065 if (!(sts->state_flags & SF_GOT_BUS)) 1066 host_status = DID_NO_CONNECT; 1067 else if (!(sts->state_flags & SF_GOT_TARGET)) 1068 host_status = DID_BAD_TARGET; 1069 else if (!(sts->state_flags & SF_SENT_CDB)) 1070 host_status = DID_ERROR; 1071 else if (!(sts->state_flags & SF_TRANSFERRED_DATA)) 1072 host_status = DID_ERROR; 1073 else if (!(sts->state_flags & SF_GOT_STATUS)) 1074 host_status = DID_ERROR; 1075 else if (!(sts->state_flags & SF_GOT_SENSE)) 1076 host_status = DID_ERROR; 1077 break; 1078 case CS_DMA_ERROR: 1079 case CS_TRANSPORT_ERROR: 1080 host_status = DID_ERROR; 1081 break; 1082 case CS_RESET_OCCURRED: 1083 case CS_BUS_RESET: 1084 host_status = DID_RESET; 1085 break; 1086 case CS_ABORTED: 1087 host_status = DID_ABORT; 1088 break; 1089 case CS_TIMEOUT: 1090 host_status = DID_TIME_OUT; 1091 break; 1092 case CS_DATA_OVERRUN: 1093 case CS_COMMAND_OVERRUN: 1094 case CS_STATUS_OVERRUN: 1095 case CS_BAD_MESSAGE: 1096 case CS_NO_MESSAGE_OUT: 1097 case CS_EXT_ID_FAILED: 1098 case CS_IDE_MSG_FAILED: 1099 case CS_ABORT_MSG_FAILED: 1100 case CS_NOP_MSG_FAILED: 1101 case CS_PARITY_ERROR_MSG_FAILED: 1102 case CS_DEVICE_RESET_MSG_FAILED: 1103 case CS_ID_MSG_FAILED: 1104 case CS_UNEXP_BUS_FREE: 1105 host_status = DID_ERROR; 1106 break; 1107 case CS_DATA_UNDERRUN: 1108 host_status = DID_OK; 1109 break; 1110 default: 1111 printk(KERN_EMERG "qlogicpti%d: unknown completion status 0x%04x\n", 1112 id, sts->completion_status); 1113 host_status = DID_ERROR; 1114 break; 1115 } 1116 1117 return (sts->scsi_status & STATUS_MASK) | (host_status << 16); 1118 } 1119 1120 static struct scsi_cmnd *qlogicpti_intr_handler(struct qlogicpti *qpti) 1121 { 1122 struct scsi_cmnd *Cmnd, *done_queue = NULL; 1123 struct Status_Entry *sts; 1124 u_int in_ptr, out_ptr; 1125 1126 if (!(sbus_readw(qpti->qregs + SBUS_STAT) & SBUS_STAT_RINT)) 1127 return NULL; 1128 1129 in_ptr = sbus_readw(qpti->qregs + MBOX5); 1130 sbus_writew(HCCTRL_CRIRQ, qpti->qregs + HCCTRL); 1131 if (sbus_readw(qpti->qregs + SBUS_SEMAPHORE) & SBUS_SEMAPHORE_LCK) { 1132 switch (sbus_readw(qpti->qregs + MBOX0)) { 1133 case ASYNC_SCSI_BUS_RESET: 1134 case EXECUTION_TIMEOUT_RESET: 1135 qpti->send_marker = 1; 1136 break; 1137 case INVALID_COMMAND: 1138 case HOST_INTERFACE_ERROR: 1139 case COMMAND_ERROR: 1140 case COMMAND_PARAM_ERROR: 1141 break; 1142 }; 1143 sbus_writew(0, qpti->qregs + SBUS_SEMAPHORE); 1144 } 1145 1146 /* This looks like a network driver! */ 1147 out_ptr = qpti->res_out_ptr; 1148 while (out_ptr != in_ptr) { 1149 u_int cmd_slot; 1150 1151 sts = (struct Status_Entry *) &qpti->res_cpu[out_ptr]; 1152 out_ptr = NEXT_RES_PTR(out_ptr); 1153 1154 /* We store an index in the handle, not the pointer in 1155 * some form. This avoids problems due to the fact 1156 * that the handle provided is only 32-bits. -DaveM 1157 */ 1158 cmd_slot = sts->handle; 1159 Cmnd = qpti->cmd_slots[cmd_slot]; 1160 qpti->cmd_slots[cmd_slot] = NULL; 1161 1162 if (sts->completion_status == CS_RESET_OCCURRED || 1163 sts->completion_status == CS_ABORTED || 1164 (sts->status_flags & STF_BUS_RESET)) 1165 qpti->send_marker = 1; 1166 1167 if (sts->state_flags & SF_GOT_SENSE) 1168 memcpy(Cmnd->sense_buffer, sts->req_sense_data, 1169 SCSI_SENSE_BUFFERSIZE); 1170 1171 if (sts->hdr.entry_type == ENTRY_STATUS) 1172 Cmnd->result = 1173 qlogicpti_return_status(sts, qpti->qpti_id); 1174 else 1175 Cmnd->result = DID_ERROR << 16; 1176 1177 if (scsi_bufflen(Cmnd)) 1178 dma_unmap_sg(&qpti->op->dev, 1179 scsi_sglist(Cmnd), scsi_sg_count(Cmnd), 1180 Cmnd->sc_data_direction); 1181 1182 qpti->cmd_count[Cmnd->device->id]--; 1183 sbus_writew(out_ptr, qpti->qregs + MBOX5); 1184 Cmnd->host_scribble = (unsigned char *) done_queue; 1185 done_queue = Cmnd; 1186 } 1187 qpti->res_out_ptr = out_ptr; 1188 1189 return done_queue; 1190 } 1191 1192 static irqreturn_t qpti_intr(int irq, void *dev_id) 1193 { 1194 struct qlogicpti *qpti = dev_id; 1195 unsigned long flags; 1196 struct scsi_cmnd *dq; 1197 1198 spin_lock_irqsave(qpti->qhost->host_lock, flags); 1199 dq = qlogicpti_intr_handler(qpti); 1200 1201 if (dq != NULL) { 1202 do { 1203 struct scsi_cmnd *next; 1204 1205 next = (struct scsi_cmnd *) dq->host_scribble; 1206 dq->scsi_done(dq); 1207 dq = next; 1208 } while (dq != NULL); 1209 } 1210 spin_unlock_irqrestore(qpti->qhost->host_lock, flags); 1211 1212 return IRQ_HANDLED; 1213 } 1214 1215 static int qlogicpti_abort(struct scsi_cmnd *Cmnd) 1216 { 1217 u_short param[6]; 1218 struct Scsi_Host *host = Cmnd->device->host; 1219 struct qlogicpti *qpti = (struct qlogicpti *) host->hostdata; 1220 int return_status = SUCCESS; 1221 u32 cmd_cookie; 1222 int i; 1223 1224 printk(KERN_WARNING "qlogicpti%d: Aborting cmd for tgt[%d] lun[%d]\n", 1225 qpti->qpti_id, (int)Cmnd->device->id, (int)Cmnd->device->lun); 1226 1227 qlogicpti_disable_irqs(qpti); 1228 1229 /* Find the 32-bit cookie we gave to the firmware for 1230 * this command. 1231 */ 1232 for (i = 0; i < QLOGICPTI_REQ_QUEUE_LEN + 1; i++) 1233 if (qpti->cmd_slots[i] == Cmnd) 1234 break; 1235 cmd_cookie = i; 1236 1237 param[0] = MBOX_ABORT; 1238 param[1] = (((u_short) Cmnd->device->id) << 8) | Cmnd->device->lun; 1239 param[2] = cmd_cookie >> 16; 1240 param[3] = cmd_cookie & 0xffff; 1241 if (qlogicpti_mbox_command(qpti, param, 0) || 1242 (param[0] != MBOX_COMMAND_COMPLETE)) { 1243 printk(KERN_EMERG "qlogicpti%d: scsi abort failure: %x\n", 1244 qpti->qpti_id, param[0]); 1245 return_status = FAILED; 1246 } 1247 1248 qlogicpti_enable_irqs(qpti); 1249 1250 return return_status; 1251 } 1252 1253 static int qlogicpti_reset(struct scsi_cmnd *Cmnd) 1254 { 1255 u_short param[6]; 1256 struct Scsi_Host *host = Cmnd->device->host; 1257 struct qlogicpti *qpti = (struct qlogicpti *) host->hostdata; 1258 int return_status = SUCCESS; 1259 1260 printk(KERN_WARNING "qlogicpti%d: Resetting SCSI bus!\n", 1261 qpti->qpti_id); 1262 1263 qlogicpti_disable_irqs(qpti); 1264 1265 param[0] = MBOX_BUS_RESET; 1266 param[1] = qpti->host_param.bus_reset_delay; 1267 if (qlogicpti_mbox_command(qpti, param, 0) || 1268 (param[0] != MBOX_COMMAND_COMPLETE)) { 1269 printk(KERN_EMERG "qlogicisp%d: scsi bus reset failure: %x\n", 1270 qpti->qpti_id, param[0]); 1271 return_status = FAILED; 1272 } 1273 1274 qlogicpti_enable_irqs(qpti); 1275 1276 return return_status; 1277 } 1278 1279 static struct scsi_host_template qpti_template = { 1280 .module = THIS_MODULE, 1281 .name = "qlogicpti", 1282 .info = qlogicpti_info, 1283 .queuecommand = qlogicpti_queuecommand, 1284 .slave_configure = qlogicpti_slave_configure, 1285 .eh_abort_handler = qlogicpti_abort, 1286 .eh_host_reset_handler = qlogicpti_reset, 1287 .can_queue = QLOGICPTI_REQ_QUEUE_LEN, 1288 .this_id = 7, 1289 .sg_tablesize = QLOGICPTI_MAX_SG(QLOGICPTI_REQ_QUEUE_LEN), 1290 .use_clustering = ENABLE_CLUSTERING, 1291 }; 1292 1293 static const struct of_device_id qpti_match[]; 1294 static int qpti_sbus_probe(struct platform_device *op) 1295 { 1296 struct device_node *dp = op->dev.of_node; 1297 struct Scsi_Host *host; 1298 struct qlogicpti *qpti; 1299 static int nqptis; 1300 const char *fcode; 1301 1302 /* Sometimes Antares cards come up not completely 1303 * setup, and we get a report of a zero IRQ. 1304 */ 1305 if (op->archdata.irqs[0] == 0) 1306 return -ENODEV; 1307 1308 host = scsi_host_alloc(&qpti_template, sizeof(struct qlogicpti)); 1309 if (!host) 1310 return -ENOMEM; 1311 1312 qpti = shost_priv(host); 1313 1314 host->max_id = MAX_TARGETS; 1315 qpti->qhost = host; 1316 qpti->op = op; 1317 qpti->qpti_id = nqptis; 1318 strcpy(qpti->prom_name, op->dev.of_node->name); 1319 qpti->is_pti = strcmp(qpti->prom_name, "QLGC,isp"); 1320 1321 if (qpti_map_regs(qpti) < 0) 1322 goto fail_unlink; 1323 1324 if (qpti_register_irq(qpti) < 0) 1325 goto fail_unmap_regs; 1326 1327 qpti_get_scsi_id(qpti); 1328 qpti_get_bursts(qpti); 1329 qpti_get_clock(qpti); 1330 1331 /* Clear out scsi_cmnd array. */ 1332 memset(qpti->cmd_slots, 0, sizeof(qpti->cmd_slots)); 1333 1334 if (qpti_map_queues(qpti) < 0) 1335 goto fail_free_irq; 1336 1337 /* Load the firmware. */ 1338 if (qlogicpti_load_firmware(qpti)) 1339 goto fail_unmap_queues; 1340 if (qpti->is_pti) { 1341 /* Check the PTI status reg. */ 1342 if (qlogicpti_verify_tmon(qpti)) 1343 goto fail_unmap_queues; 1344 } 1345 1346 /* Reset the ISP and init res/req queues. */ 1347 if (qlogicpti_reset_hardware(host)) 1348 goto fail_unmap_queues; 1349 1350 printk("(Firmware v%d.%d.%d)", qpti->fware_majrev, 1351 qpti->fware_minrev, qpti->fware_micrev); 1352 1353 fcode = of_get_property(dp, "isp-fcode", NULL); 1354 if (fcode && fcode[0]) 1355 printk("(FCode %s)", fcode); 1356 if (of_find_property(dp, "differential", NULL) != NULL) 1357 qpti->differential = 1; 1358 1359 printk("\nqlogicpti%d: [%s Wide, using %s interface]\n", 1360 qpti->qpti_id, 1361 (qpti->ultra ? "Ultra" : "Fast"), 1362 (qpti->differential ? "differential" : "single ended")); 1363 1364 if (scsi_add_host(host, &op->dev)) { 1365 printk("qlogicpti%d: Failed scsi_add_host\n", qpti->qpti_id); 1366 goto fail_unmap_queues; 1367 } 1368 1369 dev_set_drvdata(&op->dev, qpti); 1370 1371 qpti_chain_add(qpti); 1372 1373 scsi_scan_host(host); 1374 nqptis++; 1375 1376 return 0; 1377 1378 fail_unmap_queues: 1379 #define QSIZE(entries) (((entries) + 1) * QUEUE_ENTRY_LEN) 1380 dma_free_coherent(&op->dev, 1381 QSIZE(RES_QUEUE_LEN), 1382 qpti->res_cpu, qpti->res_dvma); 1383 dma_free_coherent(&op->dev, 1384 QSIZE(QLOGICPTI_REQ_QUEUE_LEN), 1385 qpti->req_cpu, qpti->req_dvma); 1386 #undef QSIZE 1387 1388 fail_free_irq: 1389 free_irq(qpti->irq, qpti); 1390 1391 fail_unmap_regs: 1392 of_iounmap(&op->resource[0], qpti->qregs, 1393 resource_size(&op->resource[0])); 1394 if (qpti->is_pti) 1395 of_iounmap(&op->resource[0], qpti->sreg, 1396 sizeof(unsigned char)); 1397 1398 fail_unlink: 1399 scsi_host_put(host); 1400 1401 return -ENODEV; 1402 } 1403 1404 static int qpti_sbus_remove(struct platform_device *op) 1405 { 1406 struct qlogicpti *qpti = dev_get_drvdata(&op->dev); 1407 1408 qpti_chain_del(qpti); 1409 1410 scsi_remove_host(qpti->qhost); 1411 1412 /* Shut up the card. */ 1413 sbus_writew(0, qpti->qregs + SBUS_CTRL); 1414 1415 /* Free IRQ handler and unmap Qlogic,ISP and PTI status regs. */ 1416 free_irq(qpti->irq, qpti); 1417 1418 #define QSIZE(entries) (((entries) + 1) * QUEUE_ENTRY_LEN) 1419 dma_free_coherent(&op->dev, 1420 QSIZE(RES_QUEUE_LEN), 1421 qpti->res_cpu, qpti->res_dvma); 1422 dma_free_coherent(&op->dev, 1423 QSIZE(QLOGICPTI_REQ_QUEUE_LEN), 1424 qpti->req_cpu, qpti->req_dvma); 1425 #undef QSIZE 1426 1427 of_iounmap(&op->resource[0], qpti->qregs, 1428 resource_size(&op->resource[0])); 1429 if (qpti->is_pti) 1430 of_iounmap(&op->resource[0], qpti->sreg, sizeof(unsigned char)); 1431 1432 scsi_host_put(qpti->qhost); 1433 1434 return 0; 1435 } 1436 1437 static const struct of_device_id qpti_match[] = { 1438 { 1439 .name = "ptisp", 1440 }, 1441 { 1442 .name = "PTI,ptisp", 1443 }, 1444 { 1445 .name = "QLGC,isp", 1446 }, 1447 { 1448 .name = "SUNW,isp", 1449 }, 1450 {}, 1451 }; 1452 MODULE_DEVICE_TABLE(of, qpti_match); 1453 1454 static struct platform_driver qpti_sbus_driver = { 1455 .driver = { 1456 .name = "qpti", 1457 .of_match_table = qpti_match, 1458 }, 1459 .probe = qpti_sbus_probe, 1460 .remove = qpti_sbus_remove, 1461 }; 1462 1463 static int __init qpti_init(void) 1464 { 1465 return platform_driver_register(&qpti_sbus_driver); 1466 } 1467 1468 static void __exit qpti_exit(void) 1469 { 1470 platform_driver_unregister(&qpti_sbus_driver); 1471 } 1472 1473 MODULE_DESCRIPTION("QlogicISP SBUS driver"); 1474 MODULE_AUTHOR("David S. Miller (davem@davemloft.net)"); 1475 MODULE_LICENSE("GPL"); 1476 MODULE_VERSION("2.1"); 1477 MODULE_FIRMWARE("qlogic/isp1000.bin"); 1478 1479 module_init(qpti_init); 1480 module_exit(qpti_exit); 1481